For now, BOARD should use the qemu-riscv for risc-v.
For RISC-V:
make hypervisor BOARD=qemu-riscv SCENARIO=shared ARCH=riscv CROSS_COMPILE=riscv64-linux-gnu-
For x86:
make hypervisor BOARD=qemu SCENARIO=shared [ARCH=x86]
Tracked-On: #8805
Signed-off-by: Fei Li <fei1.li@intel.com>
This patch implements interrupt initialization and the basic
exception/interrupt handling flow on RISC-V.
init_interrupt() needs to be invoked during CPU initialization to
set up the trap vector and enable the interrupt.
RISC-V exception and interrupt handling includes:
- Saving and restoring CPU registers around traps
- Implementing handlers for:
- Supervisor software interrupt
- Supervisor timer interrupt
- Halting the CPU for all other interrupts and exceptions
------
TODOs:
1. add support for registering interrupt handlers via request_irq() and
further adoption of the common IRQ framework.
2. add support for external interrupt.
Tracked-On: #8813
Signed-off-by: Haicheng Li <haicheng.li@intel.com>
Co-developed-by: Shiqing Gao <shiqing.gao@intel.com>
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Reviewed-by: Yifan Liu <yifan1.liu@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
Without -fpie or -fno-pie specified in the CFLAGS and ASFLAGS, different
versions of riscv64-linux-gnu-gcc have different behavior, for example,
Ubuntu 13.3.0-6ubuntu2~24.04 will compile as if -fpie, but 15.1.0 will
compile as if -fno-pie. To make the build consistent specify -fpie when
CONFIG_RELOC=y and -fno-pie otherwize explicitly.
Tracked-On: #8791
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
Extension Zihintpause (Pause hint) is mandatory for RVA23. asm_pause
is implemented based on "pause" instruction.
Tracked-On: #8791
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
This is just for temporary build and should be reverted when
common debug module is integrated.
Tracked-On: #8791
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
This patch implements risc-v specific timer codes. Basically,
risc-v adapts to acrn timer framework with some specific
behaviors. So far, it enables sstc support in h-mode.
Tracked-On: #8792
Signed-off-by: Haicheng Li <haicheng.li@outlook.com>
Co-developed-by: Yong Li <yong.li@intel.com>
Signed-off-by: Yong Li <yong.li@intel.com>
Co-developed-by: Yi Y Sun <yi.y.sun@intel.com>
Signed-off-by: Yi Y Sun <yi.y.sun@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
This patch implements the IPI for RISC-V using SBI interface.
There is no common IPI concept abstracted, due to the following reasons:
- RISC-V:
Software delivers an IPI to target CPUs via software interrupts.
The interrupt number is fixed for each privilege mode (e.g.,
Supervisor Software Interrupt = IRQ 1, Machine Software Interrupt = IRQ 3).
The actual purpose of the IPI is indicated by an IPI message type,
which is a software-level concept. When the IPI is received,
the target CPU must check the message type to determine the required action.
- x86:
Software delivers an IPI to target CPUs using a specific vector number.
During CPU initialization, software can assign dedicated vectors for
particular purposes. When the IPI is received, the target CPU could
directly invoke the handler bound to that vector.
Each architecture provides its own IPI implementation, and other SW modules
directly call these arch-specific functions.
------
Notes:
* To ensure RISC-V builds pass, an empty `include/arch/riscv/asm/cpu.h`
is added since `debug/logmsg.h` includes `asm/cpu.h`.
* Implemented IPI functionality using the SBI IPI Extension (EID #0x735049).
Legacy SBI extensions are not supported in ACRN.
----------
Changelog:
* Updated commit message and code comments to state explicitly that
legacy SBI extensions are not supported in ACRN.
* Refined the prototype of sbi_send_ipi() to align with the SBI spec:
From: int64_t sbi_send_ipi(uint64_t mask)
To: int64_t sbi_send_ipi(uint64_t mask, uint64_t mask_base)
In ACRN it is invoked as sbi_send_ipi(dest_mask, 0UL), with mask_base
set to 0UL.
* Renamed send_single_ipi() and send_dest_ipi_mask() to
arch_send_single_ipi() and arch_send_dest_ipi_mask() respectively.
Tracked-On: #8786
Signed-off-by: Haicheng Li <haicheng.li@intel.com>
Co-developed-by: Shiqing Gao <shiqing.gao@intel.com>
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
This commit adds riscv build skeleton and adds some dummy files that
prints out hello world.
To build riscv acrn.out/acrn.bin, simply:
make hypervisor \
BOARD=<any existing board> \
SCENARIO=<any existing scenario> \
ARCH=riscv
We still need to specify board and scenario as those were required by
project level makefile.
Tracked-On: #8782
Signed-off-by: Yifan Liu <yifan1.liu@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
