Detect if SOS kernel mei drivers supports virtualization,
via driver hbm version 2.2
If yes use virtio_mei mediator for the mei device
otherwise fallback to passthrou mode.
Note that HBM version is not sufficient identification
Tracked-On: #1536
Signed-off-by: Aviad Nissel <aviad.nissel@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
In vmei_start() the HBM host client is created,
it handles HBM protocol.
The HBM client is a management object and
is not exposed by the mei native driver.
The communication between TX and RX threads
is handed via internal pipe(2).
Second, we connect all fixed address clients as the mei
protocol doesn't provide connection mechanism for them,
they appear always connected.
Last, the hw_ready is set.
Define virtio_mei_ops, ass all the handlers are now available.
Tracked-On: #1536
Signed-off-by: Liu Shuo <shuo.a.liu@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
Rx is triggered from epoll event (mevent), a host client
is retrieved from associated event data. P proper mei message header is
attached to the packet and sent to the virtio FE device.
Tracked-On: #1536
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
TX from virtio driver is handled firt via
virio tx notify handler vmei_notify_tx(),
placed into host clinet tx circular buffer.
TX thread will then write the data to the device.
Tracked-On: #1536
Signed-off-by: Vitaly Lubart <vitaly.lubart@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
Implement the FW part of the HBM protocol.
Currently the support version is 2.0.
The HBM protocol handles client management, such
initialization handshake, connection, power management,
and the flow control.
Tracked-On: #1536
Signed-off-by: Vitaly Lubart <vitaly.lubart@intel.com>
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
ME client enumeration is received from sysfs attributes
of the native device.
V3: Use bounded functions.
Tracked-On: #1536
Signed-off-by: Vitaly Lubart <vitaly.lubart@intel.com>
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
mei mediator perform reset handshake via
the cfgread/write handlers and provide access
to fw status registers.
Tracked-On: #1536
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
There are multiple types of resets that need to be handled
by the mei device.
The reset may be initiated from both sides host or fw.
The host requests reset on probe and remove,
power state transaction, and errors,
while ME FW may request reset upon error.
If the native device undergo reset the host application
has to be notified.
Tracked-On: #1536
Signed-off-by: Aviad Nissel <aviad.nissel@intel.com>
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
1. virtio_mei structure represents an instance of mei device.
2. vmei_me_client represents an ME application in the MEI FW.
3. vmei_host_client represent a host application talking to the
ME application, ME application can support multiple connections.
4. Add debug helpers
Tracked-On: #1536
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
The virtio has two virtio queues, TX and RX.
TX have two segment buffers one for header and one for data.
The virtio_mei declares host buffer of size 128 slots, each
slot is a 4 bytes value.
For synchronization hw_ready and host_reset configuration flags
are used that emulates mei reset flow.
And last fw status registers must be also readable via virtio
mei device.
Tracked-On: #1536
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
mei handles objects on the list, hence reference counting
infrastructure is required for easier multithreading.
Tracked-On: #1536
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
Add standard container_of macro to access
the parent struct pointer.
Tracked-On: #1536
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
libuuid sports only uuid (big endian encoding),
though mei requires guids (little endian encoding).
The base types are based on <linux/uuid.h> header.
Tracked-On: #1536
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
HBM is a control channel protocol between mei device
driver and mei fw.
Add new ioctl IOCTL_MEI_CONNECT_CLIENT_VTAG
Tracked-On: #1536
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
Remove virtio_heci to be replaced with virtio_mei
Tracked-On: #1536
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
There's no need to walk these paging tables to transfer HPA to GPA
for a VM, so remove it.
Tracked-On: #1124
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
They're: (a) only SOS would use hpa2gpa and (b) the GPA and HPA
in SOS is identical mapping.
Rename hpa2gpa to vm0_hpa2gpa then.
Tracked-On: #1124
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
get_sender_from_name would return NULL if the name of sender is not
configured in acrnprobe.xml.
This patch check the return value of it.
Tracked-On: #1024
Signed-off-by: Liu, Xinwu <xinwu.liu@intel.com>
Reviewed-by: Huang Yonghua <yonghua.huang@intel.com>
Acked-by: Chen Gang <gang.c.chen@intel.com>
devicemodel/vmcfg/example.h is a example, it is generated at build
time.
Tracked-On: #1528
Acked-by: Yin Fengwei <fengwei.yin@intel.com>
Signed-off-by: Tao Yuhong <yuhong.tao@intel.com>
run 'acrn-dm --dump <index>' to show build-in parameters
Tracked-On: #1528
Acked-by: Yin Fengwei <fengwei.yin@intel.com>
Signed-off-by: Tao Yuhong <yuhong.tao@intel.com>
Enable --vmcfg options for acrn-dm, if --vmcfg <index> is specified,
build-in VM configuration will be used, and override any other
optional parameters.
run 'acrn-dm --vmcfg list' to show all build-in VM configurations.
run 'acrnpdm --vmcfg <index>' to launch UOS with selected config.
Tracked-On: #1528
Acked-by: Yin Fengwei <fengwei.yin@intel.com>
Signed-off-by: Tao Yuhong <yuhong.tao@intel.com>
Script that setup envriment on MRB platform, for UOS with build-in
configuration
For example, you need to run mrb-env-setup.sh once, to
prepare images, networks and pci-stubs, etc,.
Tracked-On: #1528
Acked-by: Yin Fengwei <fengwei.yin@intel.com>
Signed-off-by: Tao Yuhong <yuhong.tao@intel.com>
Add build-in vm1 configuration for MRB platform, this is also an
example about how to add new VM configurations
Tracked-On: #1528
Acked-by: Yin Fengwei <fengwei.yin@intel.com>
Signed-off-by: Tao Yuhong <yuhong.tao@intel.com>
use *args_buildin[] to hold build-in VM configurations
Tracked-On: #1528
Acked-by: Yin Fengwei <fengwei.yin@intel.com>
Signed-off-by: Tao Yuhong <yuhong.tao@intel.com>
VMcfg use Kconfig mechanism to generate a header file
devicemodel/include/vmcfg_config.h, which contains many macro symbols
for conditionally compiling. This feature is disabled by default, to
enable it, You can switch to devicemodel/vmcfg/ and run 'make' with
these options:
'make menuconfig'
run 'make menuconfig' at ./devicemodel/vmcfg/, and configure manually.
When you finished, save your changes to ./devicemode/vmcfg/.config
'make oldconfig'
Overwrite ./devicemodel/vmcfg/.config with your config file, then run
'make oldconfig' at ./devicemodel/vmcfg
'make *_defconfig'
E.g, there is ./devicemodel/vmcfg/config/mrb_defconfig, you can run
'make mrb_defconfig' at ./devicemodel/vmcfg/
Tracked-On: #1528
Acked-by: Yin Fengwei <fengwei.yin@intel.com>
Signed-off-by: Tao Yuhong <yuhong.tao@intel.com>
Error msg "Invalid vmname from timer list file" will be print out when we read
a null line of file timer_list. It is a litte bit confusing. So, ignore null line
silently to avoid such confusing msg.
Tracked-On: #1517
Signed-off-by: Kaige Fu <kaige.fu@intel.com>
Acked-by: Yan, Like <like.yan@intel.com>
This patch is mainly for:
1. Check weakup reason first and only load timer list when reason is CBC_WK_RSN_RTC.
2. If failing to load timer list or reason != CBC_WK_RSN_RTC, activate all vms.
3. Add info about when we are about to activate vms reading from timer_list file.
Tracked-On: #1517
Signed-off-by: Kaige Fu <kaige.fu@intel.com>
Acked-by: Yan, Like <like.yan@intel.com>
Update the converted HLD 0.7 section 3.2 with a previously converted
static partitioning document (instead of a separate doc for this topic).
Tracked-on: #1533
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Pointer param should be declared pointer to const if
the parameter is keeped read-only.
This patch changes pointer param whose name is vm.
Tracked-On:#861
Signed-off-by: Huihuang Shi <huihuang.shi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Remove strlen in common apis, and change their caller if necessary.
Tracked-On: #1254
Signed-off-by: Liu, Xinwu <xinwu.liu@intel.com>
Reviewed-by: Yonghua Huang <yonghua.huang@intel.com>
Acked-by: Chen Gang <gang.c.chen@intel.com>
Remove unsafe api strlen except the parameter is a static string.
Tracked-On: #1254
Signed-off-by: Liu, Xinwu <xinwu.liu@intel.com>
Reviewed-by: Yonghua Huang <yonghua.huang@intel.com>
Acked-by: Chen Gang <gang.c.chen@intel.com>
This patch provides an new api to split string by extended regexp(ere).
Tracked-On: #1254
Signed-off-by: Liu, Xinwu <xinwu.liu@intel.com>
Reviewed-by: Yonghua Huang <yonghua.huang@intel.com>
Acked-by: Chen Gang <gang.c.chen@intel.com>
This patch is one workaround to resolve a crash issue for certain brand
touch screen (eGalaxTouch EXC7200-7368v1.01). The formal fix should
follow the xHCI spec to stop xfer and generate transfer completed event
trb prior to Stop Endpoint Command complete event trb. It should be a
big change and for short term, do nothing for the stop endpoint command
which is no other side effect be observed so far.
Tracked-On: #1413
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Reviewed-by: Liang Yang <liang3.yang@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
The function pci_xhci_get_native_port_index_by_path didn't
compare the bus number during the process of native USB
device searching. This patch is used to fix it.
Tracked-On: #1434
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Reviewed-by: Liang Yang <liang3.yang@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
This patch is used to support emulation of multiple layers of hubs
under Flat Mode.
Tracked-On: #1434
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Signed-off-by: Liang Yang <liang3.yang@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
This patch is used to enable multiple hubs in single layer under
Flat Mode.
Tracked-On: #1434
Signed-off-by: Liang Yang <liang3.yang@intel.com>
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
To support the multiple hubs and multiple layers of hub, the
port_map_tbl should be replaced by native_ports to record all
native devices' state, including assignment state, emulation
state etc.
Tracked-On: #1434
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Signed-off-by: Liang Yang <liang3.yang@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
