Flat Mode for hub emulation means DM emulates USB devices under hub but
hide hub itself. Under this design the Guest OS cannot see any emulated
hub. So in the perspective of Guest OS, all the emulated devices are
under root hub.
This patch is used to enable feature as mentioned above. And please NOTE,
it is the initial version of hub flat Mode hub emulation, there are one
limitation: only one physical hub is supported. If second physical hub is
connected, the connect and disconnect behavior in second hub may affect
the function of first emulated hub.
The USB HUB device model should be the final long term solution, but it is
very complex. Use flat mode HUB emulation as the short term solution first
to support some USB touch devices which integrated internal HUB.
Signed-off-by: Liang Yang <liang3.yang@intel.com>
Reviewed-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Tracked-On: #1243
The vie->opcode should be updated when decode_two_byte_opcode(),
otherwise for two bytes opcode emulate(movzx/movsx) will fail.
Signed-off-by: Qi Yadong <yadong.qi@intel.com>
- move the contents in macros.h and stdarg.h to util.h
- remove macros.h and stdarg.h
Tracked-On: #861
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
MISRAC has requirements about literal value requires a U suffix and
signed/unsigned conversion with cast. This patch is used to solve
these violations.
v1->v2
*Drop the cast of sz from uint32_t to int32_t, the signed/unsigned
violation of nchars will be solved by other patch together with
printf/sprintf/console/vuart/uart code.
*Delete the unnecessary L suffix of shifting operand.
Tracked-On: #861
Signed-off-by: Junjun Shan <junjun.shan@intel.com>
Reviewed by: Junjie Mao <junjie.mao@intel.com>
in local_set_vm_memory_region, hpa is not used for MR_DEL, and it does
not need check HV memory overlap for a MR_DEL operation.
this is a bug exposed by remapping SOS first page, as the remap page whose
gpa = 0 actually fall into HV memory area; while during MR_DEL, the input
param vm0_gpa is set to 0 by default.
Tracked-On: #1124
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acrnprobe is using SHA to generate ids for events. These ids are only used
to index events, not for cryptographic purpose.
This patch unify the generating algorithm of short and long ids to
SHA256.
Tracked-On: #1024
Signed-off-by: Liu, Xinwu <xinwu.liu@intel.com>
Reviewed-by: Zhi Jin <zhi.jin@intel.com>
Acked-by: Chen Gang <gang.c.chen@intel.com>
According to SDM 4.6 Access Rights definition, if SMAP/SMEP
is enabled, more conditions are used to decide the access rights
like SMAP/SMEP, EFLAGS.AC, R/W bit in every paging-structure entry
for page walking.
This patch add the check to guest page walking function and inject
page fault accordingly.
Tracked-On: #1207
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
The current movs emulation has issues:
1. it use gva to get/put data.
2. it only support src and dst operand are memory which does not
apply to our case (one of them should be mmio and triggers
EPT voilation).
This patch fix the issue by:
1. convert the address from gva to hva before access it.
2. handle mmio emulation.
Also fix the issue introduced by previous instruction reshuffle
patchset:
1. the desc validation should be only applied to none-64bit mode.
2. gva2gpa should be given correct guest virtual address.
Specailly for movs, we cache the dst gpa if the check during
movs decoding success. And use it directly during movs
emulation.
Tracked-On: #1207
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Tested-by: Qi Yadong <yadog.qi@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
- replace the usage of mdelay with udelay
- remove lib/mdelay.c
- rename udelay.c to misc.c
future other small APIs could put in misc.c
Tracked-On: #861
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
In current code, when read/write msix table, it first handle the case
the offset is in pba range when msix talbe and pba share the same bar.
But the code didn't add the condition whether pba bar equals msix table
bar. It will cause problems for the passthrugh devices,whose pba and msix
table don't share the same bar.
Tracked-On: #1209
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Acked-by: Yin Fengwei <fengwei.yin@intel.com>
-- update 'vlapic' in 'struct vcpu_arch' from pointer
to instance
-- add inline function(vcpu_vlapic) in vcpu.h
Tracked-On: #861
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
It has been defined in 'struct vcpu_arch'
Tracked-On: #861
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
move structure vlapic_pir_desc/vlapic_timer/
acrn_vlapic from vlapic_priv.h to vlapic.h
Tracked-On: #861
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Replace pointer with static memory for apicv_apic_access_addr
Tracked-On: #861
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Replace pointer with static memory for msr_bitmap
inside structure vm_arch.
Tracked-On: #861
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Anthony Xu <anthony.xu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Replace vmcs pointer with static memory for vmcs region
inside structure vcpu_arch.
Tracked-On: #861
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Anthony Xu <anthony.xu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This patch implements RTC feature that UOS can set RTC wakeup timer
to IOC firmware with a specific time before enter S3/S5. IOC mediator
also needs to indicate RTC wakeup reason to UOS after exit S3/S5.
Tracked-On: #1213
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
In special cases, we'd like to freeze doc versions based on a tag (e.g.,
tags/acrn-2018w34.4-140000p) and have that version show up on the
generated docs. (Normally the version shown is from the
hypervisor/VERSION file.)
With this patch, if DOC_TAG=release then it uses a RELEASE=name
environment variable (e.g., from the make command line) to override the
displayed version:
make DOC_TAG=release RELEASE=acrn-2018w34.4-140000p html
make DOC_TAG=release RELEASE=acrn-2018w34.4-140000p publish
Assuming you've checked out the tagged branch (both for acrn-hypervisor
and acrn-kernel), these make commands will generate and publish docs to
https://projectacrn.github.io/acrn-2018w34.4-14000p
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
MRB bootloader is switched to ABL ver 1820HF1_release, so change platform
acpi info accordingly to support system S3.
Tracked-On: #1196
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
In function start_cpus, we allocated memory under 1M when
preparing AP trampoline code.
With S3 feature enabled, start_cpus is called every time after
ACRN resume from S3 which leaks the allocated memory for AP
trampoline code.
To avoid memory leak, move the AP trampoline preparing function
out of start_cpus to make sure the memory for AP trampoline is
only allocated one time when system boot.
Tracked-On: #1156
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Reviewed-by: Zide Chen <zide.chen@intel.com>
In the current implementation sigev_notify is configured as
SIGEV_THREAD. When timer expires an async thread is created and
the registered timer callback is called in the context of this
thread. vrtc_update_timer will access the global data vrtc. There
is a race condition that vrtc is freed when deinit and then a timer
expires. In this case vrtc_update_timer will access a freed buffer
which causes problem such as heap corruption and segment fault.
In this patch signal model is used when timer is created. The signal
is masked and a signalfd is used to poll on it with mevent. This avoids
the race condition.
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Acked-by: Yin Fengwei <fengwei.yin@intel.com>
Tracked-On: #1185
- convert function like macros to inline functions based on MISRA-C
requirement
- remove some unused and duplicated macros
Tracked-On: #861
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
as SOS mapped all memory at the beginning, so trap vlapic need unmap its
memory; for UOS, there is no need as UOS never mapped it.
Tracked-On: #1124
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
error message for "read" or "write" was incorrect.
for developers, we just need print out direction & type value.
Tracked-On: #875
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
MRB bootloader is switched to ABL, so change platform acpi info accordingly
to support system S3.
Tracked-On: #1196
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Wait for targeting VM stopping before starting it again
Tracked-On: projectacrn/acrn-hypervisor#926
Signed-off-by: Yan, Like <like.yan@intel.com>
Acked-by: Yin Fengwei <fengwei.yin@intel.com>
Remove the unnecessary "current" field when store/load timer list.
Tracked-On: #927
Signed-off-by: Yan, Like <like.yan@intel.com>
Acked-by: Yin Fengwei <fengwei.yin@intel.com>
This commit reworked the resume flow:
- generate RSN_RTC wakeup reason to resume_vm();
- clear timer_list in memory once it's saved to fs;
- wakeup the suspended VMs only if wakeup by ignition button.
Tracked-On: #927
Signed-off-by: Yan, Like <like.yan@intel.com>
Acked-by: Yin Fengwei <fengwei.yin@intel.com>
There is no need to wakeup SOS in advance since UOS wakeup time is
not required to be that exact.
Tracked-On: #927
Signed-off-by: Yan, Like <like.yan@intel.com>
Reviewed-by: Liu Yuan <yuan1.liu@intel.com>
Acked-by: Yin Fengwei <fengwei.yin@intel.com>
Add sample script launch option to launch AliOS as a guest. And it reuse launch
android function due to the same configurations.
Tracked-On: projectacrn/acrn-hypervisor#1173
Signed-off-by: Jiangbo Wu <jiangbo.wu@intel.com>
Reviewed-by: Binbin Wu <binbin.wu@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Signed-off-by: Jiangbo Wu <jiangbo.wu@intel.com>
launch two clearlinux will use the same 'LaaG' as tap interface name. Add tap
name as parameter that will meet two UOS using different tap interface.
Tracked-On: projectacrn/acrn-hypervisor#1194
Signed-off-by: Jiangbo Wu <jiangbo.wu@intel.com>
Reviewed-by: Binbin Wu <binbin.wu@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Signed-off-by: Jiangbo Wu <jiangbo.wu@intel.com>
if some pci devices behind gvt got failures when initlizing at init_pci(), gvt
instance have no chance to be destroied even acrn-dm exits.
NOTE: this patch can not work standalone, a following patch to kernel
side(643d40961cf: "vhm: init client->kthread_exit true") is requied as well,
otherwise it will stucks during destroying gvt instance.
Tracked-On: #1141
Signed-off-by: Li Zhijian <zhijianli88@163.com>
for each pass-thru device and its entry owned by one VM, so
change the pass-thru device's softirq lock & entry list into
per VM, so one VM's PT device interrupt process will not
interfere with other VMs; especially in case one user OS
"interrupt storm" happens, it will have little effect on
service OS.
Tracked-On: #866
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The arch_vcpu->irq_window_enabled is almost useless in original code.
This patch use it to avoid unnecessary "interrupt-window exiting"
conditions check if "interrupt-window exiting" is aleady enabled.
Tracked-On: #1190
Signed-off-by: Yu Wang <yu1.wang@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
The external interrupt events only can be inject if RFLAGS.IF = 1 and no
blocking by both STI and MOV SS. If met this scenario, we need to enable
"interrupt-window exiting" for injection in next VMEXIT.
Tracked-On: #1189
Signed-off-by: Yu Wang <yu1.wang@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
If the "virtual-interrupt delivery" is enabled for vmx apicv, then need
avoid to enable interrupt-window exiting. From SDM Vol3, 29.2.1, the
evaluation of pending virtual interrupts only be trigger if
"interrupt-window exiting" is 0.
The original code will enable interrupt-window vmexit if any pending
vlapic interrupts even the "virtual-interrupt delivery" is enabled. It
will cause the pending interrupts can't be evaluate immediately until
guest triggered interrupt-window vmexit.
For "virtual-interrupt delivery" enabled case, just need sync the
pending interrupts to irr and update rvi if needed. And CPU will
evaluate and automatic injecct virtual interrupt at appropriate time. It
doesn't rely on interrupt-window vmexit.
For "virtual-interrupt delivery" disabled case, need to check if satisfy
the virtual interrupt injection conditions before doing the interrupt
injection. If not, then need to enable interrupt-window vmexit and
re-check the conditions in the next time vmexit.
Tracked-On: #1187
Signed-off-by: Yu Wang <yu1.wang@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
vsbl v0.9 change:
- New feature:
Update vFastboot to v0.9
Support vRPMB key handover for AaaG.
Support to append SSDT to ACPI table for First Stage Mount in AaaG.
Enable to set boot target to CrashOS when panic happens in vSBL debug version, release version is not affected.
Add SHA512SUM file for vsbl binaries.
Tracked-On:#1179, #1180, #1181, #1182
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Update the ACRN documentation to use the official name of GVT-g
in ACRN to "AcrnGT" (ACRN-GT was previously widely used).
Also update the few occurences of "GVT-G" to "GVT-g" to be
consistent across our documentation. This includes a couple of
file name updates.
Signed-off-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
