Now it's using the memory reserve by hypervisor. So there's not
necessaty to map or ummap this region from SOS.
Tracked-On: #1942
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
The previous would reserve memory for trusty in SOS kernel. Howerer,
there would no available 16 MB continue memory any more after a long time.
This result in allocating memory for trusty failed. This patch will reserve
memory for trusty in ACRN hypervisor in which case the memory allocation
for trusty will never fail.
Tracked-On: #1942
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
This patch places all unsupported MSRs in the intercepted_msrs[], but
don't implement any handlers in the switch clauses. Hence any
accesses from guests result in GP exceptions.
Tracked-On: #1867
Signed-off-by: Zide Chen <zide.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
- Put most of the emulated MSR number in emulated_msrs[], and remove
the individual calls to enable_msr_interception().
- vcpu_thread() injects General Purpose exception to the guest if any
VMEXIT handler doesn't return 0. This patch removes vcpu_inject_gp()
from all MSR VMEXIT handlers to keep the code clean.
- remove dead code.
Tracked-On: #1867
Signed-off-by: Zide Chen <zide.chen@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Regarding SGX, guests could access CPUID.07H.EBX[2] before query CPUID
leaf 12H.
Intel SDM 36.7.2: "If CPUID.(EAX=07H, ECX=0H):EBX.SGX = 1, the processor
also supports querying CPUID with EAX=12H on Intel SGX resource capability
and configuration."
Clear CPUID.07H.ECX[30] SGX_LC to make the guest view consistent.
Tracked-On: #1867
Signed-off-by: Zide Chen <zide.chen@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This patch allows to disable the serial port directly from Kconfig. This used
to only be possible from the command-line (by passing "uart=disabled"). To
disable the serial port via Kconfig, simply unselect the "Serial IO type"
option.
The default options do not seem to have any effect anymore (and were confusing
anyway) so they are removed and the serial port is enabled for various platforms
in their corresponding *.config file.
Tracked-On: #1481
Signed-off-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
`@return` is dedicated for brief description of return values, not for comments
stating actual return values. In addition, sphinx + breathe does not join
multiple adjacent `@return`. This results in multiple `Return` sections in the
generated document, which is confusing.
This patch replaces `@return` with `@retval` for the lists of return
values. Adjacent `@retval` can be joined into one list by breathe.
v1 -> v2:
* Replace return value descriptions like `negative` and `positive` with
expressions like `<0` and `>0` in `@retval`.
* Keep the list of `@retval` comprehensive, even when there is a `@return` to
generally describe what the return value means.
* Drop duplicated `@return` when it does not give more information than the
`@retval` list.
Tracked-On: #1595
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
It is preferred to state the absence of a return value explicitly in the
doxygen-stile comments. Currently there are different styles of doing this,
including:
@return None
@return NULL
@return void
@return N/A
This patch unifies the above with `@return None`.
Tracked-On: #1595
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
As SOS has already adapted to the new state transition of VHM requests for a
month, the old `valid` field can now be safely obsoleted.
This patch changes the `valid` field as reserved and drops all the code that
reads or modifies this field for backward compatibility. The embedded comments
are updated accordingly, following the doxygen style.
Tracked-On: #875
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
MISRA-C requires that if the return value of a function call is
assigned to a local variable, this value shall be used in all paths.
This patch moves the variable assignment right before the moment that
the variable is used.
Tracked-On: #861
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Boot component prepares the very basic platform boot env. It finally call
into platform initilization entries:
- bsp_boot_init & cpu_secondary_init for start up
- or restore_s3_context for wakeup
This patch just move files into reorg dir.
Tracked-On: #1842
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
IEC 61508,ISO 26262 standards highly recommend single-exit rule.
Reduce the count of the "return entries".
Fix the violations which is comply with the cases list below:
1.Function has 2 return entries.
2.The first return entry is used to return the error code of
checking variable whether is valid.
Fix the violations in "if else" format.
Tracked-On: #861
Signed-off-by: Huihuang Shi <huihuang.shi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
IEC 61508,ISO 26262 standards highly recommend single-exit rule.
Reduce the count of the "return entries".
Fix the violations which is comply with the cases list below:
1.Function has 2 return entries.
2.The first return entry is used to return the error code of
checking variable whether is valid.
Fix the violations in "if else" format.
Tracked-On: #861
Signed-off-by: Huihuang Shi <huihuang.shi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
v1-v2:
Bypass this case:
When binary arithmetic operators of different precedence (e.g. '+'
and '*') are mixed in an expression, parentheses are added to the
sub-expressions using the operator with a higher precedence.
v1:
The operator precedence rules are complicated and it is easy to make a mistake.
So add brackets to make operator expression more readable.
Tracked-On: #861
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
MISRA-C required every switch statement shall have a default label.
Tracked-On: #861
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
IEC 61508,ISO 26262 standards highly recommend single-exit rule.
Reduce the count of the "return entries".
Fix the violations which is comply with the cases list below:
1.Function has 2 return entries.
2.The first return entry is used to return the error code of
checking variable whether is valid.
Fix the violations in "if else" format.
Tracked-On: #861
Signed-off-by: Huihuang Shi <huihuang.shi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
replace HV_DEBUG with CONFIG_COM_IRQ which is more reasonable
Tracked-On: #861
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Reviewed-by: Li, Fei1 <fei1.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
now the size of sanitized_page is 32KB,
revise it to 4KB.
Tracked-On: #1842
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Currently guest IA32_TSC_AUX MSR is loaded manually right before VM
entry, and saved right after VM exit.
This patch enables VM-Entry Control and VM-Exit Control to switch
MSR IA32_TSC_AUX between host and guest automatically. This helps to
keep vcpu_thread() function and struct acrn_vcpu cleaner.
Also it removes the dead code of intercepting IA32_TSC_AUX.
Tracked-On: #1867
Signed-off-by: Zide Chen <zide.chen@intel.com>
Reviewed-by: Li, Fei1 <fei1.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
remove the usage of HV_DEBUG related to shell command in assign.c
Tracked-On: #861
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
remove the usage of HV_DEBUG in ioapic.c
Tracked-On: #861
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
In theory, there would have 256 pending interrupts on lapic ISR.
Add this check to avoid theoretic infinite loop for clearing
lapic isr. Leave the potentially hardware issue to machine check.
Tracked-On: #861
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Although the lapic base MSR have the same value in per-cpu except that the BSP bit.
However, we would enter s3 on the BSP cpu. After the resume from s3, the BSP bit was
clear on the BSP cpu. This patch fix this bug.
Tracked-On: #861
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Now if the vmexit reason is virtulized EOI for level triggered
interrupts, HV will loop all the ptdev entries, it is time-consuming,
this patch add vpin to ptdev entry mapping for vpic and vioapic
when add intx entry for a vm,it can use the ptdev entry directly
according to the mapping for vpin and ptdev entry when EOI vmexit.
v3-->v4:
-- add check vpin in remove_intx_remapping
-- move check vpin from ptdev_add_intx_remapping to add_intx_remapping
Tracked-On: #861
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Reviewed-by: Binbin Wu <binbin.wu@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
Move ptdev lock out from add_intx_remapping/add_msix_remapping
/remove_intx_remapping/remove_msix_remapping and make it protect
the whole add entry/remove entry process
v3-->v4:
--move ptdev lock out
v2-->v3:
-- still use ptdev lock for add/remove ptdev entry
Tracked-On: #861
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Reviewed-by: Binbin Wu <binbin.wu@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
-- Config MAX_PT_IRQ_ENTRIES 64 in Kconfig
-- Remove ptdev list
-- Add alloc_ptdev_entry_id api
v3-->v4:
-- move is_entry_active from assign.c to ptdev.h
-- Add clear active flag in release_entry
v2-->v3:
-- Remove redundancy active check for ptdev entry
in release_all_entries and get_ptdev_info
v1-->v2:
-- split to small patches
Tracked-On: #861
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Reviewed-by: Binbin Wu <binbin.wu@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
This patch introduce a new mode of IO request completion, polling mode.
Now, the sketch of ioreq process can be,
A. UOS vcpu0 generate PIO/MMIO ->
B. pcpu1(vcpu0 of UOS) trap into HV ->
C. pcpu1 build ioreq, send IPI and enter idle ->
D.1 pcpu0(vcpu0 of SOS) response IPI,
D.2 pcpu0 handle the ioreq in HV, kernel, DM,
D.3 pcpu0 mark ioreq as complete,
D.4 pcpu0 hypercall to enter HV ->
E.1 pcpu0 send IPI to wake pcpu1 up
E.2 UOS vcpu0 continue running
With this change, it skips D.4, E.1 steps. In step C, pcpu1 will enter a
polling ioreq state idle after send out the IPI.
It can save about ~5000 cpu cycles.
In polling mode, we do the polling in idle instead of pause cpu all the
time. It will consume more power. A better way is to use monitor/mwait
instructions which can put cpu into a sleep state with monitoring a
memory address. Unfortunately, APL has bug with monitor. We can gather
all ioreqs state into one monitorable memory and take advantage of
monitor/mwait for future platform.
The way polling or notification is per VM. We can config VMs in
different mode. By default, IO request completion will use notification
mode for all VMs. We can switch it by Kconfig.
Tracked-On: #1821
Signed-off-by: Shuo Liu <shuo.a.liu@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
This patch adds more comments to describe the structures and functions of vtd
that are public to the other components in the hypervisor. The comments are in
doxygen-style for document generation.
Tracked-On: #1595
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Reviewed-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
1. use error code defined in errno.h instead of 1.
2. panic if error occured while adding devices to VM0 domain.
3. panic if failed to reqeust irq for iommu.
The two panic added would only occurs before any VM starts running.
Tracked-On: #1855
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
In current code, DMA remapping is enabled at very early stage, when there is no
device added.
Devices are added to VT-d context table when creating VMs.
There is potential risk that there may be device DMA transactions when DMA remapping is
enabled, but the device is not added to the VT-d context table. (Eg. this could happen in UEFI
enviroment when USB keyboard use in efi intenal shell.)
This patch defers DMA remapping enabling until vm creation.
Tracked-On: #1855
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Current code doesn't init interrupt config when resume from S3.
The related register contect will be lost during S3.
This patch re-init these regiters.
Tracked-On: #1855
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Add an internal API to do action according to action function provided,
which can simplify the code.
Tracked-On: #1855
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
Move move public API to the bottom part of the file.
Tracked-On: #1855
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Becuase the number of character of a line is 120.
Merge lines for a statement if needed.
Tracked-On: #1855
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
dmar_uint -> dmar_unit
remove i in line 756 added by accident.
Tracked-On: #1855
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
remove the usage of HV_DEBUG in hypercall.c and vmcall.c
TO-DO:
Enhance Makefile to compile debug/release into 2 libraries
Tracked-On: #861
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
CSE FW uses an AEK (Attestation keybox Encryption Key) to encrypt the keybox
with AES-256-GCM algorithm before sending it to Android/Trusty. This key is
derived from the latest platform Seed by CSE FW with KDF (key derivation function)
HMAC-SHA256. After Trusty retrieves this encrypted keybox over HECI/MEI driver,
Trusty needs the same AEKkey to decrypt it. Hence, before Trusty launches,
Hypervisor derives the same AEK key from Platform Seed with the same algorithm
and the same derivation parameters, then sends this AEK along with Trusty vSeed
to Trusty world memory.
Since Platform Seed is only visible to Hypervisor and it must not be
sent to any guest VM, only Hypervisor can derive this AEK from this
Platform Seed, just like previous per-Trusty virtual Seed derivation.
Please note that Android Attestation Keybox is shared in a single hardware
platform, so all the Trusty instance/world can get the same AEK for
decryption even if there are multiple Android User OS/VMs running
on top of Hypervisor.
v1 --> v2:
Add detailed description why we need the patch to derive an extra key
v2 --> v3:
Convert API descriptions to Doxygen
Tracked-On: #1812
Reviewed-by: Bing Zhu <bing.zhu@intel.com>
Reviewed-by: Kai Wang <kai.z.wang@intel.com>
Signed-off-by: Chen Gang G <gang.g.chen@intel.com>
Acked-by: Bing Zhu <bing.zhu@intel.com>
An I/O handler is not linked to the I/O access size, so in searching for
the registered I/O handler, don't need to check the I/O request's access
size.
In struct vm_io_handler_desc, change fields addr and len to port_start and
port_end respectively to adapt to this change.
Tracked-On: #1815
Signed-off-by: Zide Chen <zide.chen@intel.com>
Reviewed-by: Li, Fei1 <fei1.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
1. CPU_SEG_WRITE->CPU_SEG_READ: it's actually seg read
2. 0x%hu -> 0x%x: it need print hex format
Tracked-On: #1833
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
