Add a target in the make file to install the 32bit ELF acrn binary
and rename to acrn.sbl
Suggested-by: Arzhan Kinzhalin <arzhan.i.kinzhalin@intel.com>
Signed-off-by: Miguel Bernal Marin <miguel.bernal.marin@linux.intel.com>
acrn.efi is a binary and need to be installed to /usr/lib instead of
/usr/share.
Suggested-by: Arzhan Kinzhalin <arzhan.i.kinzhalin@intel.com>
Signed-off-by: Miguel Bernal Marin <miguel.bernal.marin@linux.intel.com>
Move the platform apl-mrb samples to devicemodel samples directory.
Add the install target to the missing samples files and re-organize the
samples directory structure to have nuc and apl-mrb samples.
Suggested-by: Arzhan Kinzhalin <arzhan.i.kinzhalin@intel.com>
Signed-off-by: Miguel Bernal Marin <miguel.bernal.marin@linux.intel.com>
According to the C99 manual 6.5.15
syntax conditional-expression
logical-OR-expression
logical-OR-expression ? expression :conditional-expression
above bnf rules requires expression not be none
Signed-off-by: huihuang.shi <huihuang.shi@intel.com>
- move vmexit handling into vmexit_handler
- add error handling, failure will inject #GP
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
there are data transfer between guest(GPA) & hv(HPA), especially for
hypercall from guest.
guest should make sure these GPAs are address continous, but hv cannot
assure HPAs which mapped to these GPAs are address continous, for example,
after enable hugetlb, a contious GPA range could come from two different
2M pages.
this patch is handling such case by doing gpa page walking during
copy_from_vm & copy_to_vm.
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
merge these two APIs to 'dump_intr_excp_frame'
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
removed unnecessary nested check when dump exception
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
rename intr_ctx to intr_excp_ctx
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
move intr_ctx to irq.h, delete intr_ctx.h
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
We removed '\n' in bootargs file so there is no '\n' attached
to cmdline when stitching ACRN. Then we don't need to deal with
it in ACRN.
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Eddie Dong <Eddie.dong@intel.com>
The SBL could pass cmdline to vm0 kernel by using mbi->mi_cmdline
which should be passed to vm0 kernel as well.
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Eddie Dong <Eddie.dong@intel.com>
boot/multiboot.c is only used by SBL. So move it to boot/sbl.
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Eddie Dong <Eddie.dong@intel.com>
EDK Shell API is not standard API defined by UEFI spec.
The gnu-efi below v3.0 doesn't support EDK Shell API
(for example, GetShellArgcArgv), that leads to the hypervisor
unable to boot up when the host machine is installed with
old gnu-efi.
Signed-off-by: Jack Ren <jack.ren@intel.com>
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
That can allow the user to pass the cmdline to hypervisor
from UEFI Shell or BIOS. For example:
Shell> EFI\acrn\acrn.efi bootloader=\EFI\org.clearlinux\bootloaderx64.efi uart=mmio@0x91230000
$ sudo efibootmgr -c -l "\EFI\acrn\acrn.efi" -d /dev/sda -p 1 -L \
"ACRN Hypervisor" -u "bootloader=\EFI\org.clearlinux\bootloaderx64.efi uart=mmio@0x91230000"
Signed-off-by: Jack Ren <jack.ren@intel.com>
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
only trusty related hypercall will come from UOS, others should come from VM0
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Macro GEN_CASE in hypervisor is not used. It's just for userspcace tool
acrntrace and we get one copy of it in ./tools/acrntrace/trace_event.h.
So, remove it.
Signed-off-by: Kaige Fu <kaige.fu@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
Reviewed-by: Yan, Like <like.yan@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Exception type is missing when inject a #GP.
GP should be injected even when guest irq disabled.
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <Eddie.dong@intel.com>
- MMIO access size is not initialized before
instruction emulation.
- rename 'analyze_instruction()' to 'decode_instruction()'
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Changes:
1. Move io request related functions from hypercall.c to io_request.c
since they are not hypercalls;
2. Remove acrn_insert_request_nowait() as it is never used;
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Remove tinycrypt files:
Currently, hkdf_sha256 (based on Tinycrypt) is used by Trusty seed
derivation. And we plan to remove Tinycrypt from ACRN hypervisor
now, and replace it with another crypto lib in the future.
Signed-off-by: Qi Yadong <yadong.qi@intel.com>
Reviewed-by: Zhu Bing <bing.zhu@intel.com>
Reviewed-by: Wang Kai <kai.z.wang@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
rename atomic_cmpxchg_int to atomic_cmpxchg
replace atomic_cmpset_long with atomic_cmpxchg64
rename atomic_readandclear_long to atomic_readandclear64
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@Intel.com>
1. vpic_wire_mode no need to atomically set its value.
2. uart open conut want to atomically set its value not atomically set
its bits.
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
From now on, only plan to support atomic operation for int/long.
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Check ept rwx misconfigurations when config memory attribute,
if misconfig it will assert.
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Lock should be on target vcpu in function pause_vcpu(), not current vcpu.
Signed-off-by: Victor Sun <victor.sun@intel.com>
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Add set_memmaps hypercall to support multi regions memmap.
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
allocated all pcpus to vm0 to handle possible AP wakeup flow for all cpus,
as we pass org ACPI table to VM0 - that means VM0 can see all CPUs.
SOS(VM0) start expected CPUs through "maxcpus=" kernel cmdline option.
During first hypercall from SOS, calling vm_fixup to free un-expect-enabled
vcpus from VM0.
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Xu, Anthony <anthony.xu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
remove sipi_from_efi_boot_service_exit & efi_deferred_wakeup_pcpu workaround
for uefi boot flow
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Xu, Anthony <anthony.xu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
wakeup AP need INIT-SIPI-SIPI sequence in old time, now we only need
INIT-SIPI.
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Xu, Anthony <anthony.xu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
If the target is an array, then only the first element
will be copied.
So replace structure assignment with memcpy_s().
Signed-off-by: Qi Yadong <yadong.qi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Remove 'license_header' files that were located in hypervisor/ and
devicemodel/ and used by the respective Makefiles to build the
'include/version.h' header file.
Both Makefiles were adjusted to use the top-level LICENSE file
Signed-off-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
Move all mem operations functions into a single
source code file, instead of the various source
code files that just implement a single or few
funtion.
No functional change.
Signed-off-by: Kaige Fu <kaige.fu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Move all string operations functions into a single
source code file, instead of the various source
code files that just implement a single or few
function.
No functional change.
Signed-off-by: Kaige Fu <kaige.fu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
- device driver should register valid i/o handlers
in any cases, avoid referencing to default handler
- remove i/o handler test code as they shall
never be NULL.
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Now the -O0 option is used. In such case the code is not optimized.
Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Signed-off-by: Zheng Gen <gen.zheng@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
If the optimization option is enabled, it is possible that one variable is
not initialized before using in the get_vioapic_info. (In fact the warning is
bogus)
This is only to reduce the compiling warning.
Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
FPU/SSE is not supported in HV. Otherwise it is possible that the
SSE/FPU register is used under -O2 option.
So the gcc option is added to disable them.
Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Now two flags can be used to control the optimizatin option. So unify them
and only one flag can be used to config the optimization
Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Signed-off-by: Zheng Gen <gen.zheng@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Now one uint64_t type is used to obtain the corresponding descriptor_table
for GDT/IDT. This will cause the stack protect corruption under -O2.
So the descriptor_table struct is added to configure the GDT/IDT of VMCS.
V1->V2: Move the descriptor_table into vmx.h header file
And its type is renamed from dt_addr_t to descriptor_table.
Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Signed-off-by: Zheng Gen <gen.zheng@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The RFLAGS will be touched in some inline assembly.(exec_vmxon/
RFLAGS_RESTORE). The "cc" constraint should be added. Otherwise
it won't be handled under -O2 option.
And "%%XXX" register should also be added into constraints.
Otherwise it will be optimized incorrectly.
Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Signed-off-by: Zheng Gen <gen.zheng@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Add vlapic_create_timer/vlapic_reset_timer to setup/reset a timer.
Add vlapic_update_lvtt to disarm timer when mode changes.
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Using __func__ instead of function string name.
Using tab instead of more whitespace.
Using macro instead of numeric constants.
Remove unnecessary function declaration.
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
These code is useless since it just pseudocode. Current it doesn't
support vlapic one-shot/periodic timer.
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
make the timer list be ordered to speed up expried timer
process and next timer event finding.
Add timer would not schedule timer unless it's the next
timer event.
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The name of acrn_register is too generic, rename to acpi_generic_address
which is more common.
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Kevin Tian <kevin.tian@intel.com>
V2->V3: Updated variable name: trampoline_code_paddr
V1->V2: changed variable name: init_ap_code_addr
These page tablea are sitting right after the trampoline code, so adjust it according to
the actual loaded address for trampoline code
Signed-off-by: Zheng, Gen <gen.zheng@intel.com>
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Signed-off-by: Zide Chen <zide.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong>
Acked-by: Xu, Anthony <anthony.xu@intel.com>
V3->V4: Updated function/variable names for accurancy
V2->V3: Changed a few function/variable names to make it less confusing
V1->V2: removed the unneccesary cache flushing
- For UEFI boot, allocate memory for trampoline code in ACRN EFI,
and pass the pointer to HV through efi_ctx
- For other boot, scan E820 to allocate memory in HV run time
- update_trampoline_code_refs() updates all the references that need the
absolute PA with the actual load address
Signed-off-by: Zheng, Gen <gen.zheng@intel.com>
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Signed-off-by: Zide Chen <zide.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong>
Acked-by: Xu, Anthony <anthony.xu@intel.com>
V2->V3: Fixed the booting issue on MRB board and removed the restriction
of allocate memory from address 0
1) Fix the booting from MRB issue
-#define CONFIG_LOW_RAM_SIZE 0x000CF000
+#define CONFIG_LOW_RAM_SIZE 0x00010000
2) changed e820_alloc_low_memory() to handle corner case of unaligned e820 entries
and enable it to allocate memory at address 0
+ a length = end > start ? (end - start) : 0;
- /* We don't want the first page */
- if ((length == size) && (start == 0))
- continue;
3) changed emalloc_for_low_mem() to enable to allocate memory at address 0
- /* We don't want the first page */
- if (start == 0)
- start = EFI_PAGE_SIZE;
V1->V2: moved e820_alloc_low_memory() to guest.c and added the logic to
handle unaligned E820 entries
emalloc_for_low_mem() is used if CONFIG_EFI_STUB is defined.
e820_alloc_low_memory() is used for other cases
In either case, the allocated memory will be marked with E820_TYPE_RESERVED
Signed-off-by: Zheng, Gen <gen.zheng@intel.com>
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Signed-off-by: Zide Chen <zide.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong>
Acked-by: Xu, Anthony <anthony.xu@intel.com>
V1->V2: removed CONFIG_LOW_RAM_START and added ".org 0" to
cpu_secondary.S
The assumption is trampoline code is relocated while HV is not, so:
trampoline code is built at address 0, and CS register is updated
by SIPI to reflect the correct vector
in real mode part, added extra pointers for page tables and long jump buffer
so it's possible for HV code to patch the relocation offset
in long mode part, use absolute addressing when referring HV symbols,
and use relative addressing for symbols within trampoline code
Signed-off-by: Zheng, Gen <gen.zheng@intel.com>
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Signed-off-by: Zide Chen <zide.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong>
Acked-by: Xu, Anthony <anthony.xu@intel.com>
Currently config_page_table_attr() treats MMU_MEM_ATTR_READ exactly as
MMU_MEM_ATTR_BIT_READ_WRITE for PTT_HOST, so even when MMU_MEM_ATTR_WRITE
is not used, the R/W bit in PTE is still being set
Signed-off-by: Zide Chen <zide.chen@intel.com>
- According to Intel SDM 24.9.2,Vol3, should check the
validity of "VM-exit interruption information" before
extracting the vector of interrupt.
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
- rename it to 'io_shared_page' to keep consistent
with ACRN HDL foils.
- update related code that reference this data structure.
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
This patch makes the Service OS bootloader configurable by passing
a command-line argument to 'acrn.efi' when setting up the EFI
bootloader using, e.g., 'efibootmgr'. If no argument is passed, the
default bootloader used is: "\EFI\org.clearlinux\bootloaderx64.efi".
This is the default bootloader/setting used by Clearlinux and is set
in the bsp/uefi/include/bsp/bsp_cfg.h file (via the
CONFIG_UEFI_OS_LOADER_NAME define)
The general format of the argument is: "bootloader=<\path\to\bootloader>".
As a concrete example, imagine the following set-up:
* You have installed the Service OS (bare-metal for now)
* Bootloader is "\EFI\org.clearlinux\bootloaderx64.efi"
* Boot device is '/dev/sda'
* EFI System Partition (ESP) is '1'
* You put the ACRN hypervisor under "\EFI\acrn\"
To change the default boot entry to boot the ACRN hypervisor, enter:
# efibootmgr -c -l "\EFI\acrn\acrn.efi" -d /dev/sda -p 1 \
-L "ACRN Hypervisor" -u "bootloader=\EFI\org.clearlinux\bootloaderx64.efi"
And reboot your machine.
Signed-off-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
- Add "DBG" or "REL" to indicate the DBG build or REL build explicityly;
- Change the build time format to "%F %T".
Example:
HV version 0.1-rc4-2018-04-28 14:20:32-b2d7282-dirty DBG build by like
Change-Id: Ib410064b0a6603e3c90f30dffa722237c07fc069
Signed-off-by: Yan, Like <like.yan@intel.com>
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Make assert on max px cnt of boot cpu data, since it shouldn't happen if
px data is properly initialized in boot process.
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Kevin Tian <kevin.tian@intel.com>
The initial of iobitmap pointer should be moved out of loop since address
is sequentially incremented.
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Kevin Tian <kevin.tian@intel.com>
with this patch guest could access idle io port and enter idle normally.
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Kevin Tian <kevin.tian@intel.com>
The patch add function in vhm hypercall to retrieve physical cx data
to VHM/DM.
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Kevin Tian <kevin.tian@intel.com>
Each VM would have its own Cx data, for now we copy it from boot_cpu_info.
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Kevin Tian <kevin.tian@intel.com>
The cx data is hardcoded within HV, load it to boot_cpu_data when HV boot.
The patch provide a3960 soc cx data for example.
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Kevin Tian <kevin.tian@intel.com>
currently, pass-thru devices are managed by per-vm's remapping entries
which is virtual based:
- MSI entry is identified by virt_bdf+msix_index
- INTx entry is identified by virt_pin+vpin_src
it works but it's not a good design for physical resource management, for
example a physical IOAPIC pin could belong to different vm's INTx entries,
the Device Model then must make sure there is no resource conflict from
application's level.
This patch change the design from virtual to physical based:
- MSI entry is identified by phys_bdf+msix_index
- INTx entry is identified by phys_pin
The physical resource is directly managed in hypervisor, a miss adding
entry will be found by hypervisor and return error message with failure.
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Xu, Anthony <anthony.xu@intel.com>
add initialize_timer to initialize or reset a timer;
add_timer add timer to corresponding physical cpu timer list.
del_timer delete timer from corresponding physical cpu timer list.
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Get tsc hz by cpuid 0x15 if we supported, otherwise
calibrate tsc by pit timer.
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
If guest reboot is issued before trusty init hypercall is issued,
we shouldn't destroy ept fo trusty memory because the ept is not
created yet.
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Due to redundant waking up APs When rebooting UOS, the crash occurs
and fail to reboot UOS.
Signed-off-by: Zheng, Gen <gen.zheng@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Using eax will truncate the high 32bit part of 64bit virtual address.
And the type of sync is unsigned long, so using rbx instead of ebx.
Signed-off-by: Zheng, Gen <gen.zheng@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
This is to do the clean-up of IOAPIC mmio-access. Use the same API to
access the IOAPIC register. At the same time it also helps to avoid the
optimization in direct access mode.(The volatile is already added in
mmio_read_long/mmio_write_long)
V1->V2: Follow Fengwei's suggestion to use the mmio_read/write_long
Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
The input operand for inline assembly is passed from the caller. And they
are not the immediate type. Instead the register should be used.
This also helps to reduce the compile error if the optimizatin is enabled.
Signed-off-by: Zhao Yakui<yakui.zhao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Now just add some basic feature/capability detect (not all). Vapic
didn't add here for if we must support vapic then the code which
for vapic not supported must remove, like mmio apic r/w.
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Split pm.c from cpu_state_tbl.c to put guest power management related
functions, keep cpu_state_tbl.c to store host cpu state table and
related functions.
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Kevin Tian <kevin.tian@intel.com>
for timer list is operated by per-cpu; and no interrupt
service operates it too. So it's unnecessary for spinlock.
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
adding "hugepagesz=1G" and "hugepages=X" into SOS cmdline, for X, current
strategy is making it equal
e820_mem.total_mem_size -CONFIG_REMAIN_1G_PAGES
if CONFIG_REMAIN_1G_PAGES is not set, it will use 3 by default.
CONFIG_CMA is added to indicate using cma cmdline option for SOS kernel,
by default system will use hugetlb cmdline option if no CONFIG_CMA defined.
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Xu, Anthony <anthony.xu@intel.com>
change its input from map_params to page_table_type, and make it as a
public API.
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Xu, Anthony <anthony.xu@intel.com>
before just AP can run "rdtscp" intruction, if run it on BSP,
it will cause "illegal instruction"; now align BSP & AP.
also remove duplicated code.
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
1. exception vector and other information
can be extracted from 'VM-Exit Interrupt-Information'
field of VMCS only if bit31 (Valid) is set.
-Intel SDM 24.9.2, Vol3
2. Rename 'exit-interrupt_info' to 'idt_vectoring_info'
in 'struct vcpu_arch', which is consistent with
SDM 24.9.3, Vol3
3. 'IDT-vectoring information' in VMCS is 32bit
-Intel SDM 24.9.3, Vol3
Update the type of 'idt_vectoring_info' in
'struct vcpu_arch'from 'uint32_t' to 'uint64_t'.
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
If subsequent write is on the same address, maybe the compiler will optimize
the access of MMIO memory and only the last write takes effect.In such case
it is wrong. For example:
mmio_write_long(0x25, addr);
mmio_write_long(0x26, addr);
mmio_write_long(0x27, addr);
After volatile is added, it can avoid the above possible optimization and
assure that each write takes effect.
Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The mmio_or_long/mmio_and_long/mmio_rmw_long is defined to perform
the read & write operation. But they are not used. So they are removed.
Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Add percpu earlylog sbuf within hypervisor memory space to accommodate log
before sos booting, and copy the earlylog to SOS allocated sbuf at the first
do_logmsg after SOS sets the sbuf during booting.
With the patch, earlylog of hypervisor could be captured with acrnlog
service if SOS booted. And it may help debugging hv issue if SOS failed to
boot, with "logdump" command.
Signed-off-by: Yan, Like <like.yan@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
These APIs are not used, and not as safe as spinlock_irqsave_obtain/
spinlock_irqrestore_release.
Signed-off-by: Yan, Like <like.yan@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Before referencing to physical address of devs such as lapic, ioapic,
vtd, and uart, switch to virtual address.
Use a phisical address of pml4 to write CR3.
Signed-off-by: Zheng, Gen <gen.zheng@intel.com>
SDM 24.9.1 Volume3:
- 'Exit reason' field in VMCS is 32 bits.
SDM 24.9.4 in Volume3
- 'VM-exit instruction length' field
in VMCS is 32 bits.
This patch is to redefine the data types of above fields
in 'struct vcpu_arch' and udpate the code using these
two fields.
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Since we get cpu feature/capability in boot_cpu_data at boot initialization,
then there no need to get this feature/capability using cpuid again.
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Update X86_FEATURE_OSXSAVE when enabled and replace is_xsave_supported
with cpu_has_cap(X86_FEATURE_OSXSAVE).
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Add cpu_has_cap API for cpu feature/capability detect instead of
add get_xxx_cap for each feature/capability detect.
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
remove data defination of mmio_addr_t, vaddr_t, paddr_t,
and ioport_t.
Signed-off-by: Zheng, Gen <gen.zheng@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Signed-off-by: Zheng, Gen <gen.zheng@intel.com>
Using ebx will truncate the high 32bit part of 64bit virtual address.
So using rbx instead of ebx.
Signed-off-by: Zheng, Gen <gen.zheng@intel.com>
Reviewed-by: Yakui, Zhao <yakui.zhao@intel.com>
In the case that the copy sz is 0, it is unnecessary to do copy.
Signed-off-by: Zheng, Gen <gen.zheng@intel.com>
Reviewed-by: Chen, Jason Cl <jason.cj.chen@intel.com>
Reviewed-by: Yakui, Zhao <yakui.zhao@intel.com>
This address maybe invalid if a hostile address was set
in hypercall 'HC_SET_IOREQ_BUFFER'.it should be validated
before using.
Update:
-- save HVA to guest OS's request buffer in hyperviosr
-- change type of 'req_buf' from 'uint64_t' to 'void *'
-- remove HPA to HVA translation code when using this addr.
-- use error number instead of -1 when return error cases.
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
This is workaround patch to resolve Disti performance issue.
In kernel 4.14, PAT is skipped to initialize if MTRR is not enabled,
while graphics driver need set WC to GGTT memory to accelerate memcpy,
if PAT is not initialized, default PAT register will treat UC- as
uncacheable, which will impact gfx performance. Change PAT default
register value to treat UC- as WC to workaroud this problem.
Revert me when PAT/MTRR strong correlation is removed in kernel.
Signed-off-by: Fei Jiang <fei.jiang@intel.com>
Switch all the referenced virtual address to physical address
include ept mapping, vmcs field, vmxon, vmclear, and vmptrld.
Signed-off-by: Zheng, Gen <gen.zheng@intel.com>
Reviewed-by: Chen, Jason Cl <jason.cj.chen@intel.com>
Reviewed-by: Yakui, Zhao <yakui.zhao@intel.com>
Signed-off-by: Zheng, Gen <gen.zheng@intel.com>
Before using a node of list, initialize it.
Signed-off-by: Zheng, Gen <gen.zheng@intel.com>
Reviewed-by: Yakui, Zhao <yakui.zhao@intel.com>
Reviewed-by: Chen, Jason Cl <jason.cj.chen@intel.com>
Guest OS rdtsc/rdtscp doesn't trap into hypervisor, so remove them.
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
if failed to allocate page structure for root_table or context_table,
ASSERT system and return.
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Tian, Kevin <kevin.tian@intel.com>
add necessary HPA2HVA/HVA2HPA transition for context_table_addr
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Tian, Kevin <kevin.tian@intel.com>
Acked-by: Xu, Anthony <anthony.xu@intel.com>
add necessary HPA2HVA/HVA2HPA transition for root_table_addr
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Tian, Kevin <kevin.tian@intel.com>
Acked-by: Xu, Anthony <anthony.xu@intel.com>
