Fix violations for function whose parameter can be read-only.
Tracked-On: #861
Signed-off-by: Huihuang Shi <huihuang.shi@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
bitmap_test parameter addr should be read-only,
the addr is in the asm code "output" region,
change it to the "input" region.
Tracked-On: #861
Signed-off-by: Huihuang Shi <huihuang.shi@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
That string was changed by accident and introduced the removed
items.
Tracked-On: #1465
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
guest software loading is per VM instead of vcpu. So we move it
from prepare_vcpu to prepare_vm. And make sure it's called for
all VMs for partition mode.
Tracked-On: #1565
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
For VMs of partition mode, there is no guarantee 1:1 mapping
between gpa and hpa, we need to copy the native gdt table to
each VM's memory.
Tracked-On: #1565
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Enable pstore via the sos kernel cmdline, as ABL doesn't
reserve memory and pass parameters for pstore.
Tracked-On: #1024
Signed-off-by: Zhi Jin <zhi.jin@intel.com>
Reviewed-by: Binbin Wu <binbin.wu@intel.com>
Since strlen/vsnprintf/ato* api are not safe, so use strnlen instead of
strlen, use vasprintf instead of vsnprintf and use strtol instead of
atoi.
Tracked-On: #1254
Signed-off-by: xiaojin2 <xiaojing.liu@intel.com>
Reviewed-by: Huang Yonghua <yonghua.huang@intel.com>
Reviewed-by: Liu, Xinwu <xinwu.liu@intel.com>
Acked-by: Chen Gang <gang.c.chen@intel.com>
route GSI number#2 to PIC IRQ#0, as by default IRQ for
8254 timer is connected to I/O APIC Pin #2 and PIC Pin #0
Tracked-On: #861
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
New feature:
Update vFastboot to v1.0
Boot time optimization
Support Crash mode, which uses vFastboot in vSBL as Crash mode target.
Support Ramooops.
Tracked-On: #968, #1578, #1579, #1580
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
All the platforms supported by ACRN supports x2APIC. So enabled
x2APIC for ACRN hv. Removed any code that is needed for xAPIC mode
of operation.
Tracked-On: #1455
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
Reviewed by: Yonghua Huang <yonghua.huang@intel.com>
if acrnd or acrn_guest service enabled, launch_uos.sh will be called
early time during system boot up, while a pci driver module may be
insmod and disable cpu hotplug in short time, which could make
cpu offline fail, we need check it to make sure cpu offline real happen
before hypercall to disable vcpu.
Tracked-On: https://github.com/projectacrn/acrn-hypervisor/issues/1584
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
1. it need delete intr delay timer when its ptdev entry
is deactivated to avoid the timer still active;
2. if the dequeued entry will be added by delay timer,
it need reset current variable "entry" to find next one,
or it could be returned and handled (if it is the last one)
, then the entry's IRQ can come again, and it'll cause its
timer added twice.
Tracked-On: #1476
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
compare the two unsigned numbers to avoid delta calculation overflow.
It could happen during UOS warm root, which can trigger a "fake"
interrupt storm.
Tracked-On: #1476
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
When SOS shutdown/reboot, systemd will send SIGTERM to acrnd. We should catch up
this signal and stop all vms gracefully.
BTW, this path also fix the following error when stop acrnd service by removing
ExecStop config. Systemd will send SIGTERM signal to process by default.
systemd[9378]: acrnd.service: Failed to execute command: No such file or directory
systemd[9378]: acrnd.service: Failed at step EXEC spawning /usr/bin/killall: No such file or directory
-- Subject: Process /usr/bin/killall could not be executed
-- Defined-By: systemd
-- Support: https://lists.freedesktop.org/mailman/listinfo/systemd-devel
--
-- The process /usr/bin/killall could not be executed and failed.
--
-- The error number returned by this process is 2.
Tracked-On: #1563
Signed-off-by: Kaige Fu <kaige.fu@intel.com>
Acked-by: Yan, Like <like.yan@intel.com>
ACRN hypervisor follows MISRA-C which has some inconsistencies with the Linux
kernel coding style. Namely,
* Braces are required even for single-statement blocks.
* Zero-initialisers to global variables are allowed.
* Line limit is 120 instead of 80.
This patch adds a .checkpatch.conf so that checkpatch.pl stops warning on the
exceptions above when invoked under the root directory of the acrn-hypervisor
repository.
The coding style documentation is updated accordingly.
Tracked-On: #1557
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
sscanf and strcpy are banned according to the security requirements.
So replace them with their safe alternative.
Tracked-on: #1496
Signed-off-by: Jie Deng <jie.deng@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
These APIs are wrap of standard strto* APIs. The first parameters in
these APIs should be declared as "const" since they have never been
changed so that they can also be used when passing a variable declared
as const char *
Fixes: e1dab512c2 ("dm: add string convert API")
Tracked-on: #1496
Signed-off-by: Jie Deng <jie.deng@intel.com>
Reviewed-by: Conghui Chen <conghui.chen@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
physical RPMB is accessed if "phisycal_rpmb" is specified
in launch.sh.
Also it reserves some RPMB area with a fixed size(32KB) for
AttKB and future usage, which is RO for UOS.
Tracked-On: #1544
Signed-off-by: Huang, Yang <yang.huang@intel.com>
Acked-by: Zhu Bing <bing.zhu@intel.com>
The commit id "c5f4c5" translats from enum to macro, the content
is not correct,fixed now.
Tracked-On: #1553
Signed-off-by: Huihuang Shi <huihuang.shi@intel.com>
Reviewed-by: Zhi Jin <zhi.jin@intel.com>
UOS requires an wakeup reason when resumed from S3 suspend. If user
use "acrnctl resume [VMNAME]" without an reason, 0x0 will be used
as default reason, and this is not work. We can use CBC_WK_RSN_BTN
instead.
Tracked-On: #1550
Signed-off-by: Tao, Yuhong <yuhong.tao@intel.com>
Acked-by: Yan, Like <like.yan@intel.com>
- move the functions to access physical PCI configuration space from
pci_pt.c to the new file dm/hw/pci.c, so they can be accessed in
sharing mode as well. The new folder dm/hw is created in order to
move APIs talking to physical PCI devices out of dm/vpci.
- move the common vpci code from header file pci_priv.h to core.c.
- move file include/dm/vpci/vpci.h one level up. It seems the folder
include/dm/vpci is not necessary.
- This patch only moves code around, and doesn't make any logical
changes. Besides removes the static keyword from pci_pdev_read_cfg()
and pci_pdev_write_cfg()
Tracked-On: #1568
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Signed-off-by: Zide Chen <zide.chen@intel.com>
Reviewed-by: Li, Fei1 <fei1.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
- move most of the content of pci_priv.h to include/dm/pci.h.
This allows other code outside dm/vpci to be able to share these macros.
- code cleanup: fix alignments etc.
Tracked-On: #1568
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Signed-off-by: Zide Chen <zide.chen@intel.com>
Reviewed-by: Li, Fei1 <fei1.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Detect if SOS kernel mei drivers supports virtualization,
via driver hbm version 2.2
If yes use virtio_mei mediator for the mei device
otherwise fallback to passthrou mode.
Note that HBM version is not sufficient identification
Tracked-On: #1536
Signed-off-by: Aviad Nissel <aviad.nissel@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
In vmei_start() the HBM host client is created,
it handles HBM protocol.
The HBM client is a management object and
is not exposed by the mei native driver.
The communication between TX and RX threads
is handed via internal pipe(2).
Second, we connect all fixed address clients as the mei
protocol doesn't provide connection mechanism for them,
they appear always connected.
Last, the hw_ready is set.
Define virtio_mei_ops, ass all the handlers are now available.
Tracked-On: #1536
Signed-off-by: Liu Shuo <shuo.a.liu@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
Rx is triggered from epoll event (mevent), a host client
is retrieved from associated event data. P proper mei message header is
attached to the packet and sent to the virtio FE device.
Tracked-On: #1536
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
TX from virtio driver is handled firt via
virio tx notify handler vmei_notify_tx(),
placed into host clinet tx circular buffer.
TX thread will then write the data to the device.
Tracked-On: #1536
Signed-off-by: Vitaly Lubart <vitaly.lubart@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
Implement the FW part of the HBM protocol.
Currently the support version is 2.0.
The HBM protocol handles client management, such
initialization handshake, connection, power management,
and the flow control.
Tracked-On: #1536
Signed-off-by: Vitaly Lubart <vitaly.lubart@intel.com>
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
ME client enumeration is received from sysfs attributes
of the native device.
V3: Use bounded functions.
Tracked-On: #1536
Signed-off-by: Vitaly Lubart <vitaly.lubart@intel.com>
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
mei mediator perform reset handshake via
the cfgread/write handlers and provide access
to fw status registers.
Tracked-On: #1536
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
There are multiple types of resets that need to be handled
by the mei device.
The reset may be initiated from both sides host or fw.
The host requests reset on probe and remove,
power state transaction, and errors,
while ME FW may request reset upon error.
If the native device undergo reset the host application
has to be notified.
Tracked-On: #1536
Signed-off-by: Aviad Nissel <aviad.nissel@intel.com>
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
1. virtio_mei structure represents an instance of mei device.
2. vmei_me_client represents an ME application in the MEI FW.
3. vmei_host_client represent a host application talking to the
ME application, ME application can support multiple connections.
4. Add debug helpers
Tracked-On: #1536
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
The virtio has two virtio queues, TX and RX.
TX have two segment buffers one for header and one for data.
The virtio_mei declares host buffer of size 128 slots, each
slot is a 4 bytes value.
For synchronization hw_ready and host_reset configuration flags
are used that emulates mei reset flow.
And last fw status registers must be also readable via virtio
mei device.
Tracked-On: #1536
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
mei handles objects on the list, hence reference counting
infrastructure is required for easier multithreading.
Tracked-On: #1536
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
Add standard container_of macro to access
the parent struct pointer.
Tracked-On: #1536
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
libuuid sports only uuid (big endian encoding),
though mei requires guids (little endian encoding).
The base types are based on <linux/uuid.h> header.
Tracked-On: #1536
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
HBM is a control channel protocol between mei device
driver and mei fw.
Add new ioctl IOCTL_MEI_CONNECT_CLIENT_VTAG
Tracked-On: #1536
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
Remove virtio_heci to be replaced with virtio_mei
Tracked-On: #1536
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
There's no need to walk these paging tables to transfer HPA to GPA
for a VM, so remove it.
Tracked-On: #1124
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
They're: (a) only SOS would use hpa2gpa and (b) the GPA and HPA
in SOS is identical mapping.
Rename hpa2gpa to vm0_hpa2gpa then.
Tracked-On: #1124
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
get_sender_from_name would return NULL if the name of sender is not
configured in acrnprobe.xml.
This patch check the return value of it.
Tracked-On: #1024
Signed-off-by: Liu, Xinwu <xinwu.liu@intel.com>
Reviewed-by: Huang Yonghua <yonghua.huang@intel.com>
Acked-by: Chen Gang <gang.c.chen@intel.com>
devicemodel/vmcfg/example.h is a example, it is generated at build
time.
Tracked-On: #1528
Acked-by: Yin Fengwei <fengwei.yin@intel.com>
Signed-off-by: Tao Yuhong <yuhong.tao@intel.com>
run 'acrn-dm --dump <index>' to show build-in parameters
Tracked-On: #1528
Acked-by: Yin Fengwei <fengwei.yin@intel.com>
Signed-off-by: Tao Yuhong <yuhong.tao@intel.com>
Enable --vmcfg options for acrn-dm, if --vmcfg <index> is specified,
build-in VM configuration will be used, and override any other
optional parameters.
run 'acrn-dm --vmcfg list' to show all build-in VM configurations.
run 'acrnpdm --vmcfg <index>' to launch UOS with selected config.
Tracked-On: #1528
Acked-by: Yin Fengwei <fengwei.yin@intel.com>
Signed-off-by: Tao Yuhong <yuhong.tao@intel.com>
Script that setup envriment on MRB platform, for UOS with build-in
configuration
For example, you need to run mrb-env-setup.sh once, to
prepare images, networks and pci-stubs, etc,.
Tracked-On: #1528
Acked-by: Yin Fengwei <fengwei.yin@intel.com>
Signed-off-by: Tao Yuhong <yuhong.tao@intel.com>
