Virtio legacy device (ver < 1.0) uses a single PIO for all virtqueues.
Notifications from different virtqueues are implemented by writing
virtqueue index to the PIO. Writing different values to the same addr
needs to be mapped to different eventfds by asyncio. This is called
data match feature of asyncio.
v3 -> v4:
* Update the definition of `struct asyncio_desc`
Use `struct acrn_asyncio_info` inside it, instaed of defining the duplicated
fileds.
* Update `add_asyncio` to use `memcpy_s` rather than assigning all the fields
using 5 assignment statements.
* Update `asyncio_is_conflict` for coding style
120-character line is sufficient to write all conditions.
* Update the checks related to `wildcard`
Because we require every conditional clause to have a Boolean type
in the coding guideline.
v2 -> v3:
No change
v1 -> v2:
No change
Tracked-On: #8612
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
The create function of hv-emulated device must check the return value
of vpci_init_vdev() as it returns NULL pointer on failure, and that
function should be called atomically.
Also, the destory function should deinit the vpci devices created to
prevent resource leak.
Tracked-On: #8590
Signed-off-by: Jiaqing Zhao <jiaqing.zhao@linux.intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
In devicemodel, a passthrough device is deassigned and then assigned to
guest on guest reboot. Each time hypervisor allocates a new pci_vdev
structure to keep its info. As it was stored in a statically-allocated
array, it will eventually use up all slots, resulting both resource
leak and out-of-bounds access.
Fix it by clearing the corresponding vdev structure on device deassign,
thus a bitmap is introduced to track the usage, replacing the existing
array count.
Tracked-On: #8590
Signed-off-by: Jiaqing Zhao <jiaqing.zhao@linux.intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
When RX FIFO is not empty and Receive Data Available interrupt is
enabled, vUART should report a Receive Data Available (IIR_RXRDY) in IIR
instead of a Timeout Interrupt Pending (IIR_RXTOUT).
Tracked-On: #8583
Signed-off-by: Qiang Zhang <qiang4.zhang@intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
The break key (key value 0x0) was used as switch key from guest serial
to hv console and guest serial could not receive break key. This blocked
some guest debugging features like KGDB/KDB, sysrq, etc.
This patch leverages escape sequence "<escape> + <break>" to send break to
guest and "<escape> + e" to switch from guest serial to hv console.
Tracked-On: #8583
Signed-off-by: Qiang Zhang <qiang4.zhang@intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
1) region ID shall be configured by user via config tool.
2) region ID is programmed to "Subsystem ID" of PCI config space.
2) "Subsystem Vendor ID" is harded coded as 0x8086
Tracked-On: #8566
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
sbuf_put copies sbuf->ele_size of data, and puts into ring. Currently
this function assumes that data size from caller is no less than
sbuf->ele_size.
But as sbuf->ele_size is usually setup by some sources outside of the HV
(e.g., the service VM), it is not meant to be trusted. So caller should
provide the max length of the data for safety reason. sbuf_put() will
return UINT32_MAX if max_len of data is less than element size.
Additionally, a helper function sbuf_put_many() is added for putting
multiple entries.
Tracked-On: #8547
Signed-off-by: Wu Zhou <wu.zhou@intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
This patch adds support for HV vrtc vm_event.
RTC change event is sent upon each date/time reg write. Those events
will be handled in DM. DM will try to emit an RTC change event(to
Libvirt) based on its strategy. Only support post-launched VMs.
The DM event handler has already implemented the rtc chanage event.
Those events will be processed the same way as vrtc events from DM vrtc.
Tracked-On: #8547
Signed-off-by: Wu Zhou <wu.zhou@intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
Currently ivshmem device can only be configurated as single function
device(bdf.f = 0) on bus 0. This greatly limits the number of ivshmem
devices we can create. This patch is to enable multiple function bit in
HEADER_TYPE config register, so that we can create many more ivshmem
devices by using different function numbers on one bus:dev.
The multi function device bit is to be set on ivshmem devices whose function
number equls 0. PCI spec describe it as: ‘When Set, indicates that the
Device may contain multiple Functions, but not necessarily.’, So if this
dev is the only one on the bus:dev, it is still OK.
Tracked-On: #8520
Signed-off-by: Wu Zhou <wu.zhou@intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
ACRN boot fails when size of ivshmem device is
configured to 512MB, this patch allocates this memory
from E820 table instead of reserving in hypervisor.
Tracked-On: #8502
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
For a pdev which allocated to prelaunched VM or owned by HV, we need to check
whether it is a multifuction dev at function 0. If yes we have to emulate a
dummy function dev in Service VM, otherwise the sub-function devices will be
lost in guest OS pci probe process.
Tracked-On: #8492
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
Signed-off-by: Qiang Zhang <qiang4.zhang@intel.com>
Signed-off-by: Victor Sun <victor.sun@intel.com>
The ivshmem spec define the BAR0 offset > 16 are reserved.
So ACRN need ignore all operation when offset out of range.
Tracked-On: #8487
Signed-off-by: Zhang Chen <chen.zhang@intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
Add the ivshmem_dev_lock to protect races between release
and allocations.
Tracked-On: ##8486
Signed-off-by: Zhang Chen <chen.zhang@intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
ACRN sets the ivposition to the VM_ID in ivshmem_server_bind_peer().
This value should be saved in the ivshmem_device until unbind.
It is wrong to clear ivs_dev->mmio in the ivshmem_vbar_map(),
Instead, it should clear the ivshmem_device structure in the
create_ivshmem_device to ensure the same initial states
after VM reboot case.
Tracked-On: #8485
Signed-off-by: Zhang Chen <chen.zhang@intel.com>
Reviewed-by: Junjie Mao <Junjie.mao@intel.com>
doxygen will warn that documented return type is found for functions
that does not return anything in 1.9.4 or later versions. 'None' is
not a special keyword in doxyge, it will recognize it as description
to the return value that does not exist in void functions.
Tracked-On: #8425
Signed-off-by: Jiaqing Zhao <jiaqing.zhao@linux.intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
On x86 platform, the upper 16 bit of I/O BAR should be initialized to
zero by BIOS. Howerever, some buggy BIOS still programs the upper 16
bits to non-zero, which causes error in check_pt_dev_pio_bars(). Since
I/O BAR reprogramming by VM is currently unsupported, this patch
ignores such I/O BARs when creating vpci devices to make VM boot.
Tracked-On: #8373
Signed-off-by: Jiaqing Zhao <jiaqing.zhao@linux.intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
The current code would write 'BAR address & size_maks' into PCIe virtual
BAR before updating the virtual BAR's base address when guest writing a
PCIe device's BAR. If the size of a PCIe device's BAR is larger than 4G,
the low 32 bits size_mask for this 64 bits BAR is zero. When ACRN updating
the virtual BAR's base address, the low 32 bits sizing information would
be lost.
This patch saves whether a BAR writing is sizing or not before updating the
virtual BAR's base address.
Tracked-On: #8267
Signed-off-by: Fei Li <fei1.li@intel.com>
Now ACRN would traps MSI-X Table Structure access and does MSI-X interrupt
remapping for pass-thru PCIe devices. ACRN does this trap by unmmapping the
address ranges where the MSI-X Table Structure locates in granularity of 4K
pages. So there may have other registers (non-MSI-X structures) in these
trapped pages
However, the guest may access these registers (non-MSI-X structures) in these
trapped pages, which needs to be forwarded to the physical device. This patch
forwards the access to real hardware for pass-thru PCIe devices.
Tracked-On: #8255
Signed-off-by: Fei Li <fei1.li@intel.com>
For an IO request, hv will check if it was registered in asyncio desc
list. If yes, put the corresponding fd to the shared buffer. If the
shared buffer is full, yield the vcpu and try again later.
Tracked-On: #8209
Signed-off-by: Conghui <conghui.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Add hypercall to add/remove asyncio request info. Hv will record the
info in a list, and when a new ioreq is come, hv will check if it is
in the asyncio list, if yes, queue the fd to asyncio buffer.
Tracked-On: #8209
Signed-off-by: Conghui <conghui.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Current IO emulation is synchronous. The user VM need to wait for the
completion of the the I/O request before return. But Virtio Spec
introduces introduces asynchronous IO with a new register in MMIO/PIO
space named NOTIFY, to be used for FE driver to notify BE driver, ACRN
hypervisor can emulate this register by sending a notification to vCPU
in Service VM side. This way, FE side can resume to work without waiting
for the full completion of BE side response.
Tracked-On: #8209
Signed-off-by: Conghui <conghui.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The access to PCI config_space is handled in HV for Passthrough pci
devices. And it also provides one mechanism to forward cfg_access of
some registers to DM. For example: the opregion reg for GPU device.
This patch tried to add the support of emulated PCI ROM bar for the
device. And it doesn't handle the phys PCI ROM bar of phys PCI devices.
At the same time the rom firmware is provided in DM and pci rom bar_reg
is also emulated in DM, this leverages the quirk mechanism so that the
access to PCI rom bar_reg is forwarded to DM.
Tracked-On: #8175
Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Acked-by: Wang Yu <yu1.wang@intel.com>
This function is registered as PCI MMIO configuration
access handler, which processes PCI configuration access
request from ACRN guest hence the inputs shall be validated
to avoid potential hypervisor crash when handling inputs
from malicious guests.
Tracked-On: #7902
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Modified the copyright year range in code, and corrected "int32_tel"
into "Intel" in two "hypervisor/include/debug/profiling.h" and
"hypervisor/include/debug/profiling_internal.h".
Tracked-On: #7559
Signed-off-by: Ziheng Li <ziheng.li@intel.com>
dm/vrtc.c:565:33: error: 'current' may be used uninitialized in this
function.[-Werror=maybe-uninitialized]
Move the local variable definition into one code block to avoid warning.
Tracked-on: #7511
Signed-off-by: Yuanyuan Zhao <yuanyuan.zhao@linux.intel.com>
For physical RTC is monotonic growth, ensure vRTC monotonicity.
Periodical calibration and physical RTC modification may have
impact. Check it before reading
Tracked-On: #7440
Signed-off-by: Yuanyuan Zhao <yuanyuan.zhao@linux.intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
For Service VM modify physical rtc time and vrtc will calibrate
time by read physical rtc. So when Service VM modify physical
time, calibrate all vrtc.
Tracked-On: #7440
Signed-off-by: Yuanyuan Zhao <yuanyuan.zhao@linux.intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
For TSC's precision (20~100ppm) is lower than physical RTC (less than 20ppm),
vRTC need to be calibrated by physical RTC. A timer tiggers calibration for
vRTC every 3 hours. This can improve efficiency because physical RTC can be
read once and calibrate all vRTC.
Tracked-On: #7440
Signed-off-by: Yuanyuan Zhao <yuanyuan.zhao@linux.intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
VRTC for hv used to ignore writes to vRTC register.
This patch add time modification to vRTC.
Add base RTC time and TSC offset to get the current time. Convert
current time to vRTC register values (`struct rtcdev`). Then
modify a register, and calculate a new time. Get RTC offset by
substrcting new time from current time.
Thereafter, add RTC offset also when get current time. Then user
can get the modified time.
Tracked-On: #7440
Signed-off-by: Yuanyuan Zhao <yuanyuan.zhao@linux.intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
Service VM write physical RTC register.
Both RTC time modify and Configuration register is available.
Tracked-On: #7440
Signed-off-by: Yuanyuan Zhao <yuanyuan.zhao@linux.intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
During setting RTC time, driver will halt RTC update. So support
bit 7 of reg_b. When it set to 0, time will be updated. And
when it's set to 1, rtc will keep the second it was set.
In the process of getting RTC time, driver sets alarm interrupt,
waits 1s, and get alarm interrupt flag. So support alarm interrupt
flag update. If alarm interrupt is enabled (bit 5, reg_b set to 1),
interrupt flag register will be set (bit 7 & bit 5 of reg_c) at
appropriate time.
Tracked-On: #7440
Signed-off-by: Yuanyuan Zhao <yuanyuan.zhao@linux.intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
Add support for hour format.
Bit 1 of register B indicates the hour byte format. When it's 0,
twelve-hour mode is selected. Then the seventh bit of hour register
presents AM as 0 and PM as 1.
Tracked-On: #7440
Signed-off-by: Yuanyuan Zhao <yuanyuan.zhao@linux.intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
Current code would read physical RTC register and return it directly to guest.
This patch would read a base physical RTC time and a base physical TSC time
at initialize stage. Then when guest tries to read vRTC time, ACRN HV would
read the real TSC time and use the TSC offset to calculate the real RTC time.
This patch only support BIN data mode and 24 hour mode.
BCD data mode and 12 hour mode will add in other patch.
The accuracy of clock provided by this patch is limited by TSC, and will
be improved in a following patch also.
Tracked-On: #7440
Signed-off-by: Yuanyuan Zhao <yuanyuan.zhao@linux.intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
When enabling SRIOV capability for a PF in Service VM, ACRN Hypervisor
should add VF BARs mapping for PF since PF's firmware would access these
BARs to do initialization for VFs when it's first created.
Tracked-On: #4433
Signed-off-by: Fei Li <fei1.li@intel.com>
In spite of Table Size in MSI-X Message Control Register [Bits 10:0] masks as
RO (Register bits are read-only and cannot be altered by software), In Spec
PCIe 6.0, Chap 6.1.4.2 MSI-X Configuration "Depending upon system software
policy, system software, device driver software, or each at different times or
environments may configure a Function’s MSI-X Capability and table structures
with suitable vectors."
This patch just pass through MSI-X Control Register field to guest.
Tracked-On: #7275
Signed-off-by: Fei Li <fei1.li@intel.com>
Many of the license and Intel copyright headers include the "All rights
reserved" string. It is not relevant in the context of the BSD-3-Clause
license that the code is released under. This patch removes those strings
throughout the code (hypervisor, devicemodel and misc).
Tracked-On: #7254
Signed-off-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
The coding guideline rule C-ST-04 requires that
a 'if' statement followed by one or more 'else if'
statement shall be terminated by an 'else' statement
which contains either appropriate action or a comment.
Tracked-On: #6776
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
The coding guideline rules C-TY-27 and C-TY-28, combined, requires that
assignment and arithmetic operations shall be applied only on operands of the
same kind. This patch either adds explicit type casts or adjust types of
variables to align the types of operands.
The only semantic change introduced by this patch is the promotion of the
second argument of set_vmcs_bit() and clear_vmcs_bit() to
uint64_t (formerly uint32_t). This avoids clear_vmcs_bit() to accidentally
clears the upper 32 bits of the requested VMCS field.
Other than that, this patch has no semantic change. Specifically this patch
is not meant to fix buggy narrowing operations, only to make these
operations explicit.
Tracked-On: #6776
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The coding guideline rule C-ST-02 requires that 'the loop body shall be
enclosed with brackets', or more specifically, braces. This patch adds
braces to the single-line loop bodies.
This patch has no semantic change.
Tracked-On: #6776
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The coding guideline rule C-FN-06 requires that 'a parameter passed by
value to a function shall not be modified directly'. This patch rewrites
two functions which does modify its parameters today.
This patch has no semantic impact.
Tracked-On: #6776
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The coding guideline rule C-EP-05 requires that 'parentheses shall be used
to set the operator precedence explicitly'. This patch adds the missing
parentheses detected by the static analyzer.
Tracked-On: #6776
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Rename SOS_VM type to SERVICE_VM
rename UOS to User VM in XML description
rename uos_thread_pid to user_vm_thread_pid
rename devname_uos to devname_user_vm
rename uosid to user_vmid
rename UOS_ACK to USER_VM_ACK
rename SOS_VM_CONFIG_CPU_AFFINITY to SERVICE_VM_CONFIG_CPU_AFFINITY
rename SOS_COM to SERVICE_VM_COM
rename SOS_UART1_VALID_NUM" to SERVICE_VM_UART1_VALID_NUM
rename SOS_BOOTARGS_DIFF to SERVICE_VM_BOOTARGS_DIFF
rename uos to user_vm in launch script and xml
Tracked-On: #6744
Signed-off-by: Liu Long <long.liu@linux.intel.com>
Reviewed-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
Rename gpa_uos to gpa_user_vm
rename base_gpa_in_uos to base_gpa_in_user_vm
rename UOS_VIRT_PCI_MMCFG_BASE to USER_VM_VIRT_PCI_MMCFG_BASE
rename UOS_VIRT_PCI_MMCFG_START_BUS to USER_VM_VIRT_PCI_MMCFG_START_BUS
rename UOS_VIRT_PCI_MMCFG_END_BUS to USER_VM_VIRT_PCI_MMCFG_END_BUS
rename UOS_VIRT_PCI_MEMBASE32 to USER_VM_VIRT_PCI_MEMBASE32
rename UOS_VIRT_PCI_MEMLIMIT32 to USER_VM_VIRT_PCI_MEMLIMIT32
rename UOS_VIRT_PCI_MEMBASE64 to USER_VM_VIRT_PCI_MEMBASE64
rename UOS_VIRT_PCI_MEMLIMIT64 to USER_VM_VIRT_PCI_MEMLIMIT64
rename UOS in comments message to User VM.
Tracked-On: #6744
Signed-off-by: Liu Long <long.liu@linux.intel.com>
Reviewed-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
Rename sos_vm to service_vm.
rename sos_vmid to service_vmid.
rename sos_vm_ptr to service_vm_ptr.
rename get_sos_vm to get_service_vm.
rename sos_vm_gpa to service_vm_gpa.
rename sos_vm_e820 to service_vm_e820.
rename sos_efi_info to service_vm_efi_info.
rename sos_vm_config to service_vm_config.
rename sos_vm_hpa2gpa to service_vm_hpa2gpa.
rename vdev_in_sos to vdev_in_service_vm.
rename create_sos_vm_e820 to create_service_vm_e820.
rename sos_high64_max_ram to service_vm_high64_max_ram.
rename prepare_sos_vm_memmap to prepare_service_vm_memmap.
rename post_uos_sworld_memory to post_user_vm_sworld_memory
rename hcall_sos_offline_cpu to hcall_service_vm_offline_cpu.
rename filter_mem_from_sos_e820 to filter_mem_from_service_vm_e820.
rename create_sos_vm_efi_mmap_desc to create_service_vm_efi_mmap_desc.
rename HC_SOS_OFFLINE_CPU to HC_SERVICE_VM_OFFLINE_CPU.
rename SOS to Service VM in comments message.
Tracked-On: #6744
Signed-off-by: Liu Long <long.liu@linux.intel.com>
Reviewed-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
For the IGD device the opregion addr is returned by reading the 0xFC config of
0:02.0 bdf. And the opregion addr is required by GPU driver.
The opregion_addr should be the GPA addr.
When the IGD is assigned to pre-launched VM, the value in 0xFC of igd_vdev is
programmed into with new GPA addr. In such case the prelaunched VM reads
the value from 0xFC of 0:02.0 vdev.
But for the Service VM, the IGD is initialized by using the same policy as other PCI
devices. We only initialize the vdev_head_conf(0x0-0x3F) by checking the
corresponding pbdf. The remaining pci_config_space will be read by
leveraging the corresponding pdev. But as the above code doesn't handle the
scenario for Service VM, it causes that the Service VM fails to
read the 0xFC config_space for IGD vdev.
Then the i915 GPU driver in SOS has some issues because of incorrect 0xFC
pci_conf_space.
This patch initializes offset 0xfc of CFG space of IGD for Service VM,
it is simple and can cover post-launched VM too.
Tracked-On: #6387
Signed-off-by: Liu,Junming <junming.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
In the current hypervisor, only support at most two legacy vuarts
(COM1 and COM2) for a VM, COM1 is usually configured as VM console,
COM2 is configured as communication channel of S5 feature.
Hypervisor can support MAX_VUART_NUM_PER_VM(8) legacy vuart, but only
register handlers for two legacy vuart since the assumption (legacy
vuart is less than 2) is made.
In the current hypervisor configurtion, io port (2F8H) is always
allocated for virtual COM2, it will be not friendly if user wants to
assign this port to physical COM2.
Legacy vuart is common communication channel between service VM and
user VM, it can work in polling mode and its driver exits in each
guest OS. The channel can be used to send shutdown command to user VM
in S5 featuare, so need to config serval vuarts for service VM and one
vuart for each user VM.
The following changes will be made to support at most
MAX_VUART_NUM_PER_VM legacy vuarts:
- Refine legacy vuarts initialization to register PIO handler for
related vuart.
- Update assumption of legacy vuart number.
BTW, config tools updates about legacy vuarts will be made in other
patch.
v1-->v2:
Update commit message to make this patch's purpose clearer;
If vuart index is valid, register handler for it.
Tracked-On: #6652
Signed-off-by: Xiangyang Wu <xiangyang.wu@intel.com>
Acked-by: Eddie Dong <eddie.dong@Intel.com>
