Previously, either rnd->fd or vbs_k->fd isn't be closed in some cases.
this patch will close them in time.
V2: fix vbs_k->fd leak as well
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
- hardcode the devices' GSI info based on the platform
- reject the passthrough if the following requirement is not met
all the PCI devices that are sharing the same GSI should be assigned
to same VM to avoid physical GSI sharing between multiple VMs.
v4 -> v5
* Move the gsi_dev_mapping_tables definition in a separate file
* Add the GSI info that might be used by GPIO
* Update the HW name
v3 - > v4
* Refine the format of raw data to improve the readability
* Remove the redundant code when adding the new dev into the gsi
sharing group
v2 -> v3
* Add the MSI/MSI-x capability check
Do not add the device which supports MSI/MSI-x to the GSI sharing
group.
v1 -> v2
* Update the GSI raw data based on SBL
* Free the resources when gsi sharing violation occurs
* Move the MACRO PCI_BDF(b, d, f) to pci_core.h since passthrough.c
and gsi_sharing.c are both using it
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Reviewed-by: Edwin Zhai <edwin.zhai@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
MISRA C required function return type should be consistented.
Signed-off-by: Huihuang Shi <huihuang.shi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Update the vcpu id type as uint16_t for vm_create_vcpu, this
keeps alignment with the updates for the structure acrn_create_vcpu
used by hcall_create_vcpu in the hypervisor.
In the device model, the caller is responsible for vcpu id type
conversion; vcpu id type is uint16_t for external interface in the
current implement.
Signed-off-by: Xiangyang Wu <xiangyang.wu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
It is already assumed that ''long'' has 8-bytes, and thus there is no need to
use ULL to indicate a 8-byte unsigned constant.
This patch changes all ULL suffixes found in the hypervisor to UL.
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
- to avoid reading operations on MTRR registers if
no MTRR feature support on current platform in "init_mtrr()".
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Use right parameter in launch_uos.sh after updating prefer_msi option
Signed-off-by: Edwin Zhai <edwin.zhai@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Current option of removing vGSI capability is global, which exposes
vIOAPIC link for all ptdev even only one need this. This patch makes
it as ptdev local option to lower the system level impact. To keep
vGSI for MSI capable ptdev, just explicitly append ",keep_gsi" in
option list, like "-s 14,passthru,0/e/0,keep_gsi"
Signed-off-by: Edwin Zhai <edwin.zhai@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
ACRN needs to trap the pm1a/pm1b written/read from VM0. So we
could know when should we put the system to S3.
We will have two path back to VM0:
- S3 enter/exit sucess. Will reset VM0 and jump to VM0 wakeup vec
with real mode
- S3 enter/exit failed. Will return to the next instruction of
pm1a/pm1b register writing. VM0 will read the pm1a/pm1b evt
register to check whether it's waked up or not.
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
S3 resume path for VM0 is put bsp of VM0 to real mode and jump
to the wakeup vec of VM0. So we need to extend the init_guest_state
to support start from real mode.
We apply different CS:IP setting for BSP:
- if entry_addr of BSP is larger than 0x100000, it's not wakeup
from S3. We assume it's guest start and set CS:IP by hardcode.
- if entry_addr of BSP is smaller than 0x100000, it's wakeup
from S3. We setup CS:IP according to ACPI spec.
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Emulate VM0 resume from S3 state:
- reset BSP of VM0
- set the BSP entry to saved VM0 wakeup vec and set BSP to real mode
- start BSP
To match trampoline_spinlock release on ACRN Sx resume path, acquire
trampoline_spinlock if ACRN Sx enter fails.
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
enter_s3 is main function for ACRN to enter S3 state with following
process:
- pause vm0
- save the wakeup vec of vm0 and set wakeup vec of ACRN. So
resume from S3 will jump to ACRN wakeup
- offline APs
- update the main entry of trampoline to resume entry. After BSP
is resume from S3, it will jump to resume entry instead of AP
startup routine
- turn off vmx
- suspend devices
- enter S3.
exit S3 with following process:
- release trampoline_spinlock which is hold in trampoline code
- resume devices
- enable vmx
- update the main entry of trampoline to AP startup routine.
- online APs.
The following operations will be resume vm0 which will be added
in next patch.
Signed-off-by: Zheng Gen <gen.zheng@intel.com>
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Couple of small changes merged in this change:
- export main_entry, trampoline_spinlock and stop_cpus.
- change vm_resume() name to resume_vm()
- change resume_console_enable() name to resume_console()
- extend reset_vcpu to reset more fields of vcpu
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The S3 enter lowlevel routine saves the cpu context to memory
and enter S3 state
The S3 wakeup lowlevel routine restore cpu context and return.
Signed-off-by: Zheng Gen <gen.zheng@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
We will add host_pm.h for ACRN power manager header file.
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The device model is a userspace application on SOS to config the
PCI devices for the UOS. Audio mediator device model is to config
the virtual audio PCI device.
Signed-off-by: Zhu Yingjiang <yingjiang.zhu@linux.intel.com>
When enabling GPU passthru for guest, stolen memory needs to be
disabled. This change disables stolen memory in passthru mode.
Signed-off-by: Anitha Chrisanthus <anitha.chrisanthus@intel.com>
Reviewed-by: Gong Zhipeng <zhipeng.gong@intel.com>
Snoop control is not supported in the graphics VT-d engine and so should
be disabled in the PTEs. Also enabled iommu for graphics in the
dmar_drhd array.
v2: removed disable iommu in handle_one_drhd and combined if cond.
v3: minor code review changes
v4: moved the snoop control change to ept.c to accomodate upstream changes
Signed-off-by: Anitha Chrisanthus <anitha.chrisanthus@intel.com>
Reviewed-by: Gong Zhipeng <zhipeng.gong@intel.com>
To enable GPU passthru, BAR2 allocation had problems when the allocation
is above the 4GB memory.This change is to accomodate the 256MB aperture
allocation in BAR2 to a more managable address.
v2: changed the MEMBASE64 address instead of increasing the mem_size.
Signed-off-by: Anitha Chrisanthus <anitha.chrisanthus@intel.com>
Reviewed-by: Gong Zhipeng <zhipeng.gong@intel.com>
The for loop statement should work in both & and &&, but it seems
make more sense to have && when executing a condtion.
Signed-off-by: Yang, Yu-chu <yu-chu.yang@intel.com>
Fix the type for vector in ioapic setup, which is a potential problem:
- return VECTOR_INVALID instead of false in irq_desc_alloc_vector()
when irq is out of range;
- change variable type from int to uint32_t for vector, and correct
the returned value check.
Signed-off-by: Yan, Like <like.yan@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
For hypervisor, we initliaze the flags used in build command
to empty to avoid flags set in default env impact to hypervisor
build.
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: VanCutsem Geoffroy <geoffroy.vancutsem@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This adds Python3 and the 'kconfiglib' tool to all Dockerfiles.
This is required in order to build (and/or configure) the ACRN
hypervisor.
It also adds 'findutils' to all Fedora Dockerfiles as both 'find'
and 'xargs' are used in some Makefiles and provided by this package.
Signed-off-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
It could be also used by host as well. So we remove GUEST from
MACRO name
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Eddie Dong <Eddie.dong@intel.com>
for bsp_boot_init/cpu_secondary_init, they are on temp stack.
for bsp_boot_post/cpu_secondary_post, they are on runtime stack.
define SWITCH_TO MACRO to switch runtime stack then jump to post functions.
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
MISRA C requires that unsigned constants should have the 'U' suffix, while this
C syntax is not accepted by binutils assembler per binutil manual.
This patch explicitly spells out the unsigned constants used in the assembly
files while tracking the original expressions in comments. This fixes build
failure when using binutils <= 2.26.
v2 -> v3:
* Explicitly spell out the unsigned constants in assembly, instead of
duplicating the macros in headers which break the integrity of the
definitions.
v1 -> v2:
* Define different macros instead of wrapping all unsigned constants.
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Add some basic development tools needed to build the ACRN project.
These were not specifically called out (although most likely
already installed in any development system).
Signed-off-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
The previous logic assumes LIBDIR to be /usr/lib64 if it exists.
some x86_64 distros, like ubuntu and debian, the default x86_64 libs(gnu-efi)
are installed into /usr/lib while /usr/lib64 is for i386
~/workspace$ dpkg -L gnu-efi | grep elf_x86_64_efi.lds
/usr/lib/elf_x86_64_efi.lds
~/workspace$ dpkg -S /usr/lib64
libc6-amd64:i386: /usr/lib64
so it failed to compile efi perviously as following errors:
-----------------
ld: cannot open linker script file /usr/lib64/elf_x86_64_efi.lds: No such file or directory
Makefile:102: recipe for target '/home/lizj/workspace/acrn-hypervisor/build/hypervisor/bsp/uefi/efi/boot.so' failed
make[2]: *** [/home/lizj/workspace/acrn-hypervisor/build/hypervisor/bsp/uefi/efi/boot.so] Error 1
make[2]: Leaving directory '/home/lizj/workspace/acrn-hypervisor/hypervisor/bsp/uefi/efi'
Makefile:191: recipe for target 'efi' failed
make[1]: *** [efi] Error 2
-----------------
v3: Keep the LIBDIR determination logic for linking ('-lgnuefi -lefi').
v2: addressed Geoffroy's comments
Acked-by: "VanCutsem, Geoffroy" <geoffroy.vancutsem@intel.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
phys_cpu_num is more popular than phy_cpu_num, update them
through command.
Signed-off-by: Xiangyang Wu <xiangyang.wu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Update the structure definition to define the address type
(HVA vs HPA vs GPA) explicitly.
Convert address to HVA before access the GPA/HPA type of address.
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Before we set the page table, we should know the attribute. So
move configure the page table attribute outside of modify_paging.
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
MISRA C doesn't allowed negative shift, changed any potential signed value
to unsigned value.
Signed-off-by: Huihuang Shi <huihuang.shi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The member of width in struct e820_entries,can be declared to
uint32_t(the range of the member is bigger than 0) to avoid
negative shift.
Signed-off-by: Huihuang Shi <huihuang.shi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
MISRA C doesn't allowed negative shift, changed any potential signed value
to unsigned value.
Signed-off-by: Huihuang Shi <huihuang.shi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
