The function would write CST objects which needed to enable Cx control
to UOS DSDT table.
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Kevin Tian <kevin.tian@intel.com>
DM will use these functions to get cx entry cnt and cx data then inject
_CST objects to UOS DSDT table.
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Kevin Tian <kevin.tian@intel.com>
Move all virtual devices init/deinit to function to simplify the
failure path of main loop. In the future, new virtual device will
not touch main loop.
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Acked-by: Eddie Dong <Eddie.dong@intel.com>
- make ioc_init/ioc_deinit take struct vmctx as argument
- ioc_init return int instead of pointer to struct ioc_dev
- add ioc_dev in vmctx to track ioc_dev
- remove the atkbdc.h included in vmmapi.h
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Reviewed-by: Liu, Yuan1 <yuan1.liu@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Reviewed-by: Wang Yu <yu1.wang@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Acked-by: Eddie Dong <Eddie.dong@intel.com>
- Move the variable local_time from main.c to rtc.c
- Change vrtc_init to return int instead of pointer to vrtc. We do
track vrtc in struct vmctx.
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Print an error message and exit rather than using assert, so it is
more obvious what the problem is and no core files are produced.
Fixes#61
Signed-off-by: Icarus Sparry <icarus.w.sparry@intel.com>
Following functions have never been used anywhere.
Let's remove them.
fbsdrun_muxed()
fbsdrun_vmexit_on_hlt()
fbsdrun_vmexit_on_pause()
fbsdrun_disable_x2apic()
Remove weird prefix "fbsdrun" from following functions' name.
fbsdrun_virtio_msix() --> virtio_uses_msix()
fbsdrun_start_thread() --> start_thread()
Signed-off-by: Jie Deng <jie.deng@intel.com>
Reviewed-by: Hao Li <hao.l.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Remove weird prefix "fbsdrun" from the function name.
Since "fbsdrun_addcpu" has never been called by external
functions, Let's remove its declaration from "dm.h" and
make it as a static function to keep consistency with
"fbsdrun_deletecpu".
Signed-off-by: Jie Deng <jie.deng@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The launch script can output log messages, that should be text.
But it is not always true. E.g. "launch_UOS.sh -U 2" echo message
contain '\0', The 'grep' command will show "Binary file (xxxxxx)
matches", thus acrnctl can't get the vmname. We can use 'grep -a'
instead.
Acked-by: Xu Anthony <anthony.xu@intel.com>
Reviewed-by: Yan Like <like.yan@intel.com>
Reported-by: Chen ChengX <chengx.chen@intel.com>
Signed-off-by: Tao Yuhong <yuhong.tao@intel.com>
If guest doesn't initialize the net device, the tx thread will
block at the first tx_cond wait. When virtio_net_tx_stop is
invoked, the tx_thread will block on second tx_cond then.
Check whether we should exit tx_thread after first tx_cond
waiting
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Reviewed-by: Hao Li <hao.l.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Add AmbientTemperature signal into the whitelist,
instead of TemperatureSensorEnvironment signal.
Signed-off-by: Liu Yuan <yuan1.liu@intel.com>
Reviewed-by: Wang Yu <yu1.wang@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Remove some useless signals from the whitelist and add new three signals into
the whitelist based on requirement.
Signed-off-by: Liu Yuan <yuan1.liu@intel.com>
Reviewed-by: Wang Yu <yu1.wang@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
adding API vm_map_memseg_vma() which using ioctl IC_SET_MEMSEG call
into VHM for futher mem(ept) mapping, based on user vma information.
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Xu, Anthony <anthony.xu@intel.com>
Type '-T' in DM cmdline to enable hugetlb memory allocation.
It enabled 2 level of huge page:
Level 1: size 2M, path: /run/hugepage/acrn/huge_lv1/guid
Level 2: size 1G, path: /run/hugepage/acrn/huge_lv2/guid
NOTE:
before running, please make sure system already have enough hugepages
reserved under:
/sys/kernel/mm/hugepages/hugepages-xxxxkB/nr_hugepages
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Xu, Anthony <anthony.xu@intel.com>
to avoid system resource/memory leaked when guest os reboot.
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
If multiple ports are defined in the command line, is_console is
not set to a correct value for non-console ports when the definition
of this non-console port is following the definition of a console port.
For example in below definition, the second port is configured as
console port which is not correct:
-s 5,virtio-console,@pty:pty_port,file:file_port=/home/root/test1
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Two memory ranges are allocated:
- PCI ECFG
- PCI hole
They should be released when deinit_pci. Old code mark
this two ranges not unregistered. Which is wrong for
warm reboot case. Make them could be unregistered.
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
When doing warm reboot, the mevent module will not be deinitialized.
We need to delete all mevent registered while deinit virutal device.
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Also refine the failure path of lpc_init to make sure all
resources allocated get release.
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Add deinit function for uart.
Another work is add resource cleanup functions which is called
by other components when they are using uart.
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Move the bvmcons enable flag from main.c to consport.c.
So we don't need the flag in main.c for bvmcons.
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Add "-i" in the DM boot command line for booting IOC mediator.
NOTE: currently only ioc_init will be called in the main entry, ioc_deinit
hasn't be called so far. The DM plans to add one virtual devices list inside
of struct vmctx in the near furture, and virtual devices data structure will
add one common deinit callbacks which will be called during VM exits.
Will support ioc_deinit once that patch merged.
Signed-off-by: Liu Yuan <yuan1.liu@intel.com>
Reviewed-by: Wang Yu <yu1.wang@intel.com>
Reviewed-by: Liu Shuo <shuo.a.liu@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Add three PTY devices as dummy native channels. They are used for emulating
native lifecycle channel, native signal channel and native OEM raw channel
for IOC debugging.
Signed-off-by: Liu Yuan <yuan1.liu@intel.com>
Reviewed-by: Wang Yu <yu1.wang@intel.com>
Reviewed-by: Liu Shuo <shuo.a.liu@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This patch is used for IOC mediator debugging. Due to IOC message logs are
too much, need to save into one file instead of output stdout directly.
By default, the debug log is disabled.
Signed-off-by: Liu Yuan <yuan1.liu@intel.com>
Reviewed-by: Wang Yu <yu1.wang@intel.com>
Reviewed-by: Liu Shuo <shuo.a.liu@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This patch implements the signal whitelist feature.
All the signal messages will be discarded if they are not existed in whitelist.
Signed-off-by: Liu Yuan <yuan1.liu@intel.com>
Reviewed-by: Wang Yu <yu1.wang@intel.com>
Reviewed-by: Liu Shuo <shuo.a.liu@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This patch implements the IOC CBC signal serivces including single signal,
multi-signal and group signal. All of them are used for CAN devices
communication and IOC on-board peripherals control.
Signed-off-by: Liu Yuan <yuan1.liu@intel.com>
Reviewed-by: Wang Yu <yu1.wang@intel.com>
Reviewed-by: Liu Shuo <shuo.a.liu@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This patch implements the IOC lifecycle virtualization.
In native environment, lifecycle is uesed for SoC system power control,
likes enter/exit S3/S5. So these related messages can not forward directly
between physical IOC and Guest OS, they need to be mapped to VM pause, exit
and launch.
Signed-off-by: Liu Yuan <yuan1.liu@intel.com>
Reviewed-by: Wang Yu <yu1.wang@intel.com>
Reviewed-by: Liu Shuo <shuo.a.liu@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This patch adds the IOC signal identities and signal group identities,
that will be used by subsequent signal support patches.
Signed-off-by: Liu Yuan <yuan1.liu@intel.com>
Reviewed-by: Wang Yu <yu1.wang@intel.com>
Reviewed-by: Liu Shuo <shuo.a.liu@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Carrier Board Communication(CBC) protocol is a duplex protocol for IOC data
transfer, including physical layer, link layer, address layer and service layer.
Signed-off-by: Liu Yuan <yuan1.liu@intel.com>
Reviewed-by: Wang Yu <yu1.wang@intel.com>
Reviewed-by: Liu Shuo <shuo.a.liu@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
IOC mediator communicates with native IOC HW through several native channels of
CBC protocol. And IOC mediator communicates with virtual UART through one virtual
channel.
This patch implements channel operations including open/close/read/write.
Signed-off-by: Liu Yuan <yuan1.liu@intel.com>
Reviewed-by: Wang Yu <yu1.wang@intel.com>
Reviewed-by: Liu Shuo <shuo.a.liu@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
IOC mediator main functionality is transfer data between native CBC char
devices and virtual UART, it is implemented as full virtualization, Guest
OS can reuse native CBC driver directly.
Signed-off-by: Liu Yuan <yuan1.liu@intel.com>
Reviewed-by: Wang Yu <yu1.wang@intel.com>
Reviewed-by: Liu Shuo <shuo.a.liu@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Add Automotive IOC mediator data structure definitions.
Signed-off-by: Liu Yuan <yuan1.liu@intel.com>
Reviewed-by: Wang Yu <yu1.wang@intel.com>
Reviewed-by: Liu Shuo <shuo.a.liu@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Unlike kqueue/kevent of BSD, the epoll of Linux could be
add/del by using different API on the fly.
This patch drops the notify used by mevent_add/del and
call epoll_ctl to add/delete target fd. Only keeps
global_head to track mevent added and makes the code
logic in mevent_dispatch() a littel bit simpler.
Another thing is related with epoll_ctl. If the target
fd is regular fd which doesn't support epoll, epoll_ctl
will return -1. When DM is start by systemd, the STDIO
is not mapped to terminal, epoll_ctl on STDIO could
return -1. Which block UOS boot. We only call mevent_add
after confirm STDIO is mapped to terminal.
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Current, mevent cleanup path has issue. There are possible
following calling sequence happen when reboot/poweroff UOS:
1. mevent_dispatch() calls mevent_destroy
2. do_close_post calls some virtual device deinit to delete
mevent.
This patch introduce mevent init/deinit to make sure:
1. mevent init
2. mevent_add is called when init virtual device
3. mevent_del is called when deinit virtual device
4. mevent deinit
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
For vSBL boot path, we need to mark the memory vSBL is using
as reserved in e820 table. The add_e820_entry is added to
update the e820 table dynamically.
To simplify the code logic, we assume:
- vSBL is put the middle of one entry of default e820 table
- That entry has orignal RAM type in e820 table
- The e820 table has enough space to hold two more new entries.
If there is more complicated case in the future, we could extend
add_e820_entry to handle it.
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
The region of MPtable/ACPI table/SMBios resides in
0xF0000 ~ 0x100000. They should be marked as RESERVED instead of
RAM type in e820 table.
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Devices' de-init process might access some mapped memory space, such as
virtio virtqueues. Access after unmap will cause a fault.
Release the memory map after de-init processes can avoid it. Reading
more code, there are many error handling lost to unmap the memory.
Refined the code to do it.
Signed-off-by: Liu Shuo <shuo.a.liu@intel.com>
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
There are two build issues:
- add -fno-strict-aliasing to address
error: dereferencing type-punned pointer will break strict-aliasing rules
- initialize tfd to zero to address
error: ‘tfd’ may be used uninitialized in this function
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
This reverts commit bc0579d0ff.
The commit bc0579d makes acrn-dm crashed when launch UOS.
Crash log:
./launch_UOS.sh: line 112: 377 Segmentation fault (core dumped) acrn-dm ...
dmesg log:
acrn-dm[1264]: segfault at 1f0 ip 0000000000412257 sp 00007fffc1af9920 error 6 in acrn-dm[400000+3d000]
After this patch reverted, UOS launched successfully.
Firmware need to disconnect the client connection when host's message
overlow the receive buffer in firmware. We emulate this behavior in
backend service.
Signed-off-by: Liu Shuo <shuo.a.liu@intel.com>
Reviewed-by: Li Hao <hao.l.li@intel.com>
Reviewed-by: Wang Yu <yu1.wang@intel.com>
Reviewed-by: Zhao, Yakui <yakui.zhao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Now, we treat a read/write ENODEV error as a firmware reset. When MEI
reset happens in driver, we need disconnect all active clients and
restart HBM flow.
Signed-off-by: Liu Shuo <shuo.a.liu@intel.com>
Reviewed-by: Li Hao <hao.l.li@intel.com>
Reviewed-by: Wang Yu <yu1.wang@intel.com>
Reviewed-by: Zhao, Yakui <yakui.zhao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
HECI Bus Message is important for HECI clients communication. They use
HBM for connect, disconnect, get property and so on. In backend service,
we need do some emulation for HBM as we are running on top of native
MEI driver.
Signed-off-by: Liu Shuo <shuo.a.liu@intel.com>
Reviewed-by: Li Hao <hao.l.li@intel.com>
Reviewed-by: Wang Yu <yu1.wang@intel.com>
Reviewed-by: Zhao, Yakui <yakui.zhao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Backend service access the native HECI driver through MEI driver
interface in service OS. Some MEI clients need to be multiplexed,
the backend service will engage necessary service at clients filter.
TX thread is for passing data from guest to host MEI driver, then to
native hardware. RX thread is for passing data from native hardware to
guest.
Signed-off-by: Liu Shuo <shuo.a.liu@intel.com>
Reviewed-by: Li Hao <hao.l.li@intel.com>
Reviewed-by: Wang Yu <yu1.wang@intel.com>
Reviewed-by: Zhao, Yakui <yakui.zhao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
ME client mapping is for tracking ME clients operations between frontend
driver and backend service. It contains buffers for send/recv packing
and forwarding.
Signed-off-by: Liu Shuo <shuo.a.liu@intel.com>
Reviewed-by: Li Hao <hao.l.li@intel.com>
Reviewed-by: Wang Yu <yu1.wang@intel.com>
Reviewed-by: Zhao, Yakui <yakui.zhao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This patch implement HECI virtualization backend service based on virtio
userspace framework. This service introduce a virtio-heci device model
for DM, and can be enabled by DM parameter '-s [BUS NO],virtio-heci'.
The HECI virtualization need both backend service in device-model and
frontend driver in guest to work. Backend service mainly emulates HECI
device's behaviors to satisfy frontend driver. They are based on virtio
userspace framework. Currently, it is using two virtqueues, one is for
TX and another is for RX.
Signed-off-by: Liu Shuo <shuo.a.liu@intel.com>
Reviewed-by: Li Hao <hao.l.li@intel.com>
Reviewed-by: Wang Yu <yu1.wang@intel.com>
Reviewed-by: Zhao, Yakui <yakui.zhao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
