In the current hypervisor, only support at most two legacy vuarts
(COM1 and COM2) for a VM, COM1 is usually configured as VM console,
COM2 is configured as communication channel of S5 feature.
Hypervisor can support MAX_VUART_NUM_PER_VM(8) legacy vuart, but only
register handlers for two legacy vuart since the assumption (legacy
vuart is less than 2) is made.
In the current hypervisor configurtion, io port (2F8H) is always
allocated for virtual COM2, it will be not friendly if user wants to
assign this port to physical COM2.
Legacy vuart is common communication channel between service VM and
user VM, it can work in polling mode and its driver exits in each
guest OS. The channel can be used to send shutdown command to user VM
in S5 featuare, so need to config serval vuarts for service VM and one
vuart for each user VM.
The following changes will be made to support at most
MAX_VUART_NUM_PER_VM legacy vuarts:
- Refine legacy vuarts initialization to register PIO handler for
related vuart.
- Update assumption of legacy vuart number.
BTW, config tools updates about legacy vuarts will be made in other
patch.
v1-->v2:
Update commit message to make this patch's purpose clearer;
If vuart index is valid, register handler for it.
Tracked-On: #6652
Signed-off-by: Xiangyang Wu <xiangyang.wu@intel.com>
Acked-by: Eddie Dong <eddie.dong@Intel.com>
It's difficult to configure CONFIG_HV_RAM_SIZE properly at once. This patch
not only remove CONFIG_HV_RAM_SIZE, but also we use ld linker script to
dynamically get the size of HV RAM size.
Tracked-On: #6663
Signed-off-by: Fei Li <fei1.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
In current design, when pass-thru dev,
for the PIO bar, need to ensure the guest PIO start address
equals to host PIO start address.
Then set the VMCS io bitmap to pass-thru the corresponding
port io to guest for performance.
ACRN-DM and acrn-config should ensure the identical mapping of PIO bar.
If ACRN-DM or acrn-config failed to achieve this,
we should deny the launch of VM
Tracked-On: #6508
Signed-off-by: Liu,Junming <junming.liu@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Reviewed-by: Fei Li <fei1.li@intel.com>
This patch changes the size of vvmcs[] array from 1 to
PER_VCPU_ACTIVE_VVMCS_NUM, and actually enables multiple active VMCS12
support in ACRN. The basic operations:
- if L1 VMPTRLDs a VMCS12 without previously VMCLEAR the current
VMCS12, ACRN no longer unconditionally flushes the current VMCS12
back to L1. Instead, it tries to keep both the current and the newly
loaded VMCS12 in the nested->vvmcs[] array, unless:
- if there is no more available vvmcs[] entry, ACRN flushes one active
VMCS12 to make room for this new VMCS12.
Tracked-On: #6289
Signed-off-by: Zide Chen <zide.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This patch adds a new priority based scheduler to support
vCPU scheduling based on their pre-configured priorities.
A vCPU can be running only if there is no higher priority
vCPU running on the same pCPU.
Tracked-On: #6571
Signed-off-by: Jie Deng <jie.deng@intel.com>
Rename the clos_max field in struct rdt_info to num_closids
Rename variable valid_clos_num to common_num_closids and make it static
Tracked-On: #5917
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
These dirty flags are supposed to be per VMCS12, so move them from the
per vCPU acrn_nested struct to the newly added acrn_vvmcs struct.
Tracked-On: #6289
Signed-off-by: Zide Chen <zide.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This variable represents the L1 GPA of the current VMCS12. But it's
no longer needed in the multiple active VMCS12 case, which uses the
following variables for this purpose.
- nested->current_vvmcs refers to the vvmcs[] entry which contains the
cached current VMCS12, its associated VMCS02, and other context info.
- nested->current_vvmcs->vmcs12_gpa refers to the L1 GPA of this
current VMCS12.
Tracked-On: #6289
Signed-off-by: Zide Chen <zide.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Add an array of struct acrn_vvmcs to struct acrn_nested, so it is
possible to cache multiple active VMCS12s.
This patch declares the size of this array to 1, meaning that there is
only one active VMCS12. This is to minimize the logical code changes.
Add pointer current_vvmcs to struct acrn_nested, which refers to the
current vvmcs[] entry. In this patch, if any VMCS12 is active, it
always points to vvmcs[0].
Tracked-On: #6289
Signed-off-by: Zide Chen <zide.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
By changing the way to assign L1 VPID from bottom-up to top-down,
the possibilities for VPID conflicts between L1 and L2 guests are
small.
Then we can flush VPID just in case of conflicting.
Tracked-On: #6289
Signed-off-by: Anthony Xu <anthony.xu@intel.com>
Signed-off-by: Zide Chen <zide.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Before checking whether a PCI device is a Multi-Function Device or not, we need
make sure this PCI device is a valid PCI device. For a valid PCI device, the
'Header Layout' field in Header Type Register must be 000 0000b (Type 0 PCI device)
or 000 0001b (Type 1 PCI device).
So for a valid PCI device, the Header Type can't be 0xff.
Tracked-On: #4134
Signed-off-by: Fei Li <fei1.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
In run time, it's rare for L1 to write to the intercepted non host-state
VMCS fields, and using multiple dirty flags is not necessary.
This patch uses one single dirty flag to manage all non host-state VMCS
fields. This helps to simplify current code and in the future we may
not need to declare new dirty flags when we intercept more VMCS fields.
Tracked-On: #5923
Signed-off-by: Zide Chen <zide.chen@intel.com>
is_lapic_pt_enabled() is called at least twice in one loop of the vCPU
thread, and it's called in vmexit_handler() frequently if LAPIC is not
pass-through. Thus the efficiency of this function has direct
impact to the system performance.
Since the LAPIC mode is not changed in run time, we don't have to
calculate it on the fly in is_lapic_pt_enabled().
BTW, removed the unused lapic_mask from struct acrn_vcpu_arch.
Tracked-On: #6289
Signed-off-by: Zide Chen <zide.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Use an unused MSR on host to save ACRN pcpu ID and avoid saving and
restoring TSC AUX MSR on VMX transitions.
Tracked-On: #6289
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Signed-off-by: Zide Chen <zide.chen@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
This patch renames the GUEST_FLAG_TPM2_FIXUP to
GUEST_FLAG_SECURITY_VM.
v2 -> v3:
The "FIXUP" suffix is removed.
Tracked-On: #6320
Signed-off-by: Yifan Liu <yifan1.liu@intel.com>
- remove vcpu->arch.nrexits which is useless.
- record full 32 bits of exit_reason to TRACE_2L(). Make the code simpler.
Tracked-On: #6289
Signed-off-by: Zide Chen <zide.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This helps to improve performance:
- Don't need to execute VMREAD in vcpu_get_efer(), which is frequently
called.
- VMX_EXIT_CTLS_SAVE_EFER can be removed from VM-Exit Controls.
- If the value of IA32_EFER MSR is identical between the host and guest
(highly likely), adjust the VMX controls not to load IA32_EFER on
VMExit and VMEntry.
It's convenient to continue use the exiting vcpu_s/get_efer() APIs,
other than the common vcpu_s/get_guest_msr().
Tracked-On: #6289
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Signed-off-by: Zide Chen <zide.chen@intel.com>
MAXIMUM_PA_WIDTH will be calculated from board information.
Tracked-On: #6357
Signed-off-by: Liang Yi <yi.liang@intel.com>
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
It is used to specify the maximum number of EFI memmap entries.
On some platforms, like Tiger Lake, the number of EFI memmap entries
becomes 268 when the BIOS settings are changed.
The current value of MAX_EFI_MMAP_ENTRIES (256) defined in hypervisor
is not big enough to cover such cases.
As the number of EFI memmap entries depends on the platforms and the
BIOS settings, this patch introduces a new entry MAX_EFI_MMAP_ENTRIES
in configurations so that it can be adjusted for different cases.
Tracked-On: #6442
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Currently the sched event handling may encounter data race problem, and
as a result some vcpus might be stalled forever.
One example can be wbinvd handling where more than 1 vcpus are doing
wbinvd concurrently. The following is a possible execution of 3 vcpus:
-------
0 1 2
req [Note: 0]
req bit0 set [Note: 1]
IPI -> 0
req bit2 set
IPI -> 2
VMExit
req bit2 cleared
wait
vcpu2 descheduled
VMExit
req bit0 cleared
wait
vcpu0 descheduled
signal 0
event0->set=true
wake 0
signal 2
event2->set=true [Note: 3]
wake 2
vcpu2 scheduled
event2->set=false
resume
req
req bit0 set
IPI -> 0
req bit1 set
IPI -> 1
(doesn't matter)
vcpu0 scheduled [Note: 4]
signal 0
event0->set=true
(no wake) [Note: 2]
event0->set=false (the rest doesn't matter)
resume
Any VMExit
req bit0 cleared
wait
idle running
(blocked forever)
Notes:
0: req: vcpu_make_request(vcpu, ACRN_REQUEST_WAIT_WBINVD).
1: req bit: Bit in pending_req_bits. Bit0 stands for bit for vcpu0.
2: In function signal_event, At this time the event->waiting_thread
is not NULL, so wake_thread will not execute
3: eventX: struct sched_event of vcpuX.
4: In function wait_event, the lock does not strictly cover the execution between
schedule() and event->set=false, so other threads may kick in.
-----
As shown in above example, before the last random VMExit, vcpu0 ended up
with request bit set but event->set==false, so blocked forever.
This patch proposes to change event->set from a boolean variable to an
integer. The semantic is very similar to a semaphore. The wait_event
will add 1 to this value, and block when this value is > 0, whereas signal_event
will decrease this value by 1.
It may happen that this value was decreased to a negative number but that
is OK. As long as the wait_event and signal_event are paired and
program order is observed (that is, wait_event always happens-before signal_event
on a single vcpu), this value will eventually be 0.
Tracked-On: #6405
Signed-off-by: Yifan Liu <yifan1.liu@intel.com>
Remove the acpi loading function from elf_loader, rawimage_loaer and
bzimage_loader, and call it together in vm_sw_loader.
Now the vm_sw_loader's job is not just loading sw, so we rename it to
prepare_os_image.
Tracked-On: #6323
Signed-off-by: Zhou, Wu <wu.zhou@intel.com>
Reviewed-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Rename KERNEL_ZEPHYR to KERNEL_RAWIMAGE. Added new type "KERNEL_ELF".
Add CONFIG_GUEST_KERNEL_RAWIMAGE, CONFIG_GUEST_KERNEL_ELF and/or
CONFIG_GUEST_KERNEL_BZIMAGE to config.h if it's configured.
Tracked-On: #6323
Signed-off-by: Yang,Yu-chu <yu-chu.yang@intel.com>
Reviewed-by: Victor Sun <victor.sun@intel.com>
Previously we only support loading raw format of zephyr image as prelaunched
Zephyr VM, this would cause guest F segment overridden issue because the zephyr
raw image covers memory space from 0x1000 to 0x100000 upper. To fix this issue,
we should support ELF format image loading so that parse and load the multiple
segments from ELF image directly.
Tracked-On: #6323
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
When pass-thru GPU to pre-launched Linux guest,
need to pass GPU OpRegion to the guest.
Here's the detailed steps:
1. reserve a memory region in ve820 table for GPU OpRegion
2. build EPT mapping for GPU OpRegion to pass-thru OpRegion to guest
3. emulate the pci config register for OpRegion
For the third step, here's detailed description:
The address of OpRegion locates on PCI config space offset 0xFC,
Normal Linux guest won't write this register,
so we can regard this register as read-only.
When guest reads this register, return the emulated value.
When guest writes this register, ignore the operation.
Tracked-On: #6387
Signed-off-by: Liu,Junming <junming.liu@intel.com>
ACRN does not support the variable range vMTRR. The default
memory type of vMTRR is UC. With this vMTRR emulation guest VM
such as Linux refuses to map the MMIO address space as WB. In
order to get better performance SHM BAR of ivshmem is mapped
with PAT ignored and memory type of SHM BAR is fixed to WB.
Tracked-On: #6389
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Relocate ACPI address to 0x7fe00000 and ACPI NVS to 0x7ff00000 correspondingly.
In this case, we could include TPM event log region [0x7ffb0000, 0x80000000)
into ACPI NVS.
Tracked-On: #6320
Signed-off-by: Fei Li <fei1.li@intel.com>
ACRN used to prepare the vTPM2 ACPI Table for pre-launched VM at the build stage
using config tools. This is OK if the TPM2 ACPI Table never changes. However,
TPM2 ACPI Table may be changed in some conditions: change BIOS configuration or
update BIOS.
This patch do TPM2 fixup to update the vTPM2 ACPI Table and TPM2 MMIO resource
configuration according to the physical TPM2 ACPI Table.
Tracked-On: #6366
Signed-off-by: Tao Yuhong <yuhong.tao@intel.com>
Signed-off-by: Fei Li <fei1.li@intel.com>
1. add a name field to indicate what the MMIO Device is.
2. add two more MMIO resource to the acrn_mmiodev data structure.
Tracked-On: #6366
Signed-off-by: Tao Yuhong <yuhong.tao@intel.com>
Signed-off-by: Fei Li <fei1.li@intel.com>
ACRN could run without XSAVE Capability. So remove XSAVE dependence to support
more (hardware or virtual) platforms.
Tracked-On: #6287
Signed-off-by: Fei Li <fei1.li@intel.com>
When guest kernel has multiple loading segments like ELF format image, just
define one load address in sw_kernel_info struct is meaningless.
The patch removes kernel_load_addr member in struct sw_kernel_info, the load
address should be parsed in each specified format image processing.
Tracked-On: #6323
Signed-off-by: Victor Sun <victor.sun@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
In some scenarios (e.g., nested) where lapic-pt is enabled for a vcpu
running on a pcpu hosting console timer, the hv console will be
inaccessible.
This patch adds the console callback to every VM-exit event so that the
console can still be somewhat functional under such circumstance.
Since this is VM-exit driven, the VM-exit/second can be low in certain
cases (e.g., idle or running stress workload). In extreme cases where
the guest panics/hangs, there will be no VM-exits at all.
In most cases, the shell is laggy but functional (probably enough for
debugging purpose).
Tracked-On: #6312
Signed-off-by: Yifan Liu <yifan1.liu@intel.com>
Because the emulation code is for both split-lock and uc-lock,
rename splitlock.c/splitlock.h to lock_instr_emul.c/lock_instr_emul.h
Tracked-On: #6299
Signed-off-by: Tao Yuhong <yuhong.tao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Because the emulation code is for both split-lock and uc-lock, Changed
these API names:
vcpu_kick_splitlock_emulation() -> vcpu_kick_lock_instr_emulation()
vcpu_complete_splitlock_emulation() -> vcpu_complete_lock_instr_emulation()
emulate_splitlock() -> emulate_lock_instr()
Tracked-On: #6299
Signed-off-by: Tao Yuhong <yuhong.tao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Split-lock emulation can be re-used for uc-lock. In emulate_splitlock(),
it only work if this vmexit is for #AC trap and guest do not handle
split-lock and HV enable #AC for splitlock.
Add another condition to let emulate_splitlock() also work for #GP trap
and guest do not handle uc-lock and HV enable #GP for uc-lock.
Tracked-On: #6299
Signed-off-by: Tao Yuhong <yuhong.tao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
When ACRN uses decode_instruction to emulate split-lock/uc-lock
instruction, It is actually a try-decode to see if it is XCHG.
If the instruction is XCHG instruction, ACRN must emulate it
(inject #PF if it is triggered) with peer VCPUs paused, and advance
the guest IP. If the instruction is a LOCK prefixed instruction
with accessing the UC memory, ACRN Halted the peer VCPUs, and
advance the IP to skip the LOCK prefix, and then let the VCPU
Executes one instruction by enabling IRQ Windows vm-exit. For
other cases, ACRN injects the exception back to VCPU without
emulating it.
So change the API to decode_instruction(vcpu, bool full_decode),
when full_decode is true, the API does same thing as before. When
full_decode is false, the different is if decode_instruction() meet unknown
instruction, will keep return = -1 and do not inject #UD. We can use
this to distinguish that an #UD has been skipped, and need inject #AC/#GP back.
Tracked-On: #6299
Signed-off-by: Tao Yuhong <yuhong.tao@intel.com>
To add brakets for '(char *)(ptr)' in MACRO
container_of(), which may be used recursively.
Tracked-On: #6284
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Common structures are used by DM, kernel, HV. Aligned attribute might
caused structures size mismatch between DM/HV and kernel, as kernel uses
default GCC alignment.
So, make DM/HV also use the default GCC alignment.
Tracked-On: #6282
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
IC_ADD_HV_VDEV -> ACRN_IOCTL_CREATE_VDEV
IC_REMOVE_HV_VDEV -> ACRN_IOCTL_DESTROY_VDEV
struct acrn_emul_dev -> struct acrn_vdev
Also, move struct acrn_vdev to acrn_common.h as this structure is used
by both DM and HV.
Tracked-On: #6282
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
IC_ASSIGN_MMIODEV -> ACRN_IOCTL_ASSIGN_MMIODEV
IC_DEASSIGN_MMIODEV -> ACRN_IOCTL_DEASSIGN_MMIODEV
struct acrn_mmiodev has slight change. Move struct acrn_mmiodev into
acrn_common.h because it is used by both DM and HV.
Tracked-On: #6282
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
IC_ASSIGN_PCIDEV -> ACRN_IOCTL_ASSIGN_PCIDEV
IC_DEASSIGN_PCIDEV -> ACRN_IOCTL_DEASSIGN_PCIDEV
QUIRK_PTDEV -> ACRN_PTDEV_QUIRK_ASSIGN
struct acrn_assign_pcidev -> struct acrn_pcidev
Move struct acrn_pcidev into acrn_common.h because it is used by both
DM and HV.
Tracked-On: #6282
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
struct hc_platform_info -> struct acrn_platform_info
MAX_PLATFORM_LAPIC_IDS -> ACRN_PLATFORM_LAPIC_IDS_MAX
A layout change to the struct hc_platform_info is that move
max_kata_containers to back of vm_config_size,
uint16_t max_vcpus_per_vm;
uint16_t max_vms;
uint32_t vm_config_size;
uint64_t max_kata_containers;
Then, they are nature 64-bits aligned.
Tracked-On: #6282
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
