Add " with acrn-config" tag in build info when user build hypervisor with
acrn-config xmls would be helpful to identify the hypervisor configuration
in current build is from acrn-config xml or from source code.
Tracked-On: #3602
Signed-off-by: Victor Sun <victor.sun@intel.com>
Previously we generate config patch based on config xml in toplevel Makefile,
it brings two issues:
1. we could not generate xml configuration patch with hypervisor source only;
2. The github commit info of current code base which is defined in version.h
will be overwritten by the new generated config patch, then the lost commit
info would impact build identify and bug reproducing.
This patch fixed these two issues. Besides, the patch also modify the logic of
platform_acpi_info file existence judgement, which need to be depends on the
acrn-config patch.
Tracked-On: #3602
Signed-off-by: Victor Sun <victor.sun@intel.com>
The default script is for nvme passthrough to RT_LaaG; you can change it
to sata or using virtio_blk
Tracked-On: #3506
Signed-off-by: fuzhongl <fuzhong.liu@intel.com>
Reviewed-by: binbin.wu@intel.com; kaige.fu@intel.com
- GvtGopDxe: Fix crash if failed to get a valid mode
- GvtGopDxe: Enable GOP with parameters from vgt interface
- OvmfPkg/GvtGopDxe: Add GvtGopDxe skeleton driver
- Add back NVME support
- Update Readme.md
Tracked-On: #3700
Signed-off-by: Peter Fang <peter.fang@intel.com>
When a VM is configured with LAPIC PT mode and its vCPU is in x2APIC
mode, the corresponding pCPU needs to be reset during VM shutdown/reset
as its physical LAPIC was used by its guest
This commit fixes an issue where this reset never happens.
is_lapic_pt_enabled() needs to be called before reset_vcpu() to be able
to correctly reflect a vCPU's APIC mode.
A vCPU with LAPIC PT mode but in xAPIC mode does not require such reset,
since its physical LAPIC was not touched by its guest directly.
Tracked-On: #3708
Signed-off-by: Peter Fang <peter.fang@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
Reviewed-by: Jack Ren <jack.ren@intel.com>
add launch sample xmls for acrn-config to generate launch scripts.
launch script will generated by acrn-config/launch_config tool,
acrn-config/launch_config need launch config xml as input.
Tracked-On: #3602
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Terry Zou <terry.zou@intel.com>
1. generate launch script file and apply to the source file
usage: launch_cfg_gen.py [h]--board <board_info_file> --scenario <scenario_info_file>
--launch <launch_info_file> --uosid <uosid id>
board_info_file : file name of the board info
scenario_info_file : file name of the scenario info
launch_info_file : file name of the launch info
uosid : the uos id which to launch:[0..max uos id]
sample:
$ python3 launch_cfg_gen.py --board ../xmls/board-xmls/apl-mrb.xml
--scenario ../xmls/config-xmls/apl-mrb/sdc.xml
--launch ../xmls/launch_config/mrb_launch.xml --uosid 0
v1-v2:
1). usage: '--vm' -> '--uosid'
2). add 'uuid' option for acrn-dm
3). support parse tag from 'rootfs' to 'rootfs_dev'
4). support parse tag from 'hard_rtos' to 'Preempt-Rt Linux'
5). support pasre tag from 'redirect_console' to 'console_type'
6). add 'nvme' passthrough option
7). modify uos_type to upper string in webUI
8). support to generate launch file by uosid, this map to scenario
id
Tracked-On: #3602
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Terry Zou <terry.zou@intel.com>
1. grap 'ext4' rootfs, and store it as "BLOCK_DEVICE_INFO" tag
2. remove 'Tab' from app tools
3. add support to parse ' ' from scenario xml
v1-v2:
1). modify the board info "ROOT_DEVICE_INFO" -> "BLOCK_DEVICE_INFO"
Tracked-On: #3602
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Terry Zou <terry.zou@intel.com>
1. if SCENARIO=$(SCENARIO) is specified in make param, then override
the default CONFIG_$(SCENARIO) value in existed .config. This means
we don't need to modify the default SCENARIO config in Kconfig file
to build the hypervisor;
2. Some board name shortcuts like apl-nuc/kbl-nuc-i7 need to be converted
to official board name to make sure overrides working;
3. Previously make sbl-hypervisor did not load the defconfig so the
defconfig for boards are lost, this patch fix this issue;
4. remove SCENARIO param when make hypervisor, because SCENARIO could
be got from SCENARIO_NAME which parsed from .config;
Tracked-On: #3593
Signed-off-by: Victor Sun <victor.sun@intel.com>
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
* Update the launch scripts provided as examples on how to launch a Zephyr,
VxWorks or Windows User VM to directly use the 'OVMF.fd' bios file installed
by default in '/usr/share/acrn/bios/'
* Remove the OVMF.fd that was kept under 'doc/tutorials' (no longer needed)
* Adapt the tutorials to reflect this change
Tracked-On: #3673
Signed-off-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
Adjust the 'launch_uos.sh' script used to start a LaaG User VM to user the
OVMF.fd bios file installed under /usr/share/acrn/bios. It currently points
at a file in the local folder but neither our instructions nor our installation
script file puts it in this location. That results in an error when you try
to launch it.
Tracked-On: #3673
Signed-off-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
Reserve memory for hv sbuf to avoid its possible overwriting on kernel memory,
need to update the kernel param in corresponding config-xmls;
Tracked-On: #3602
Signed-off-by: Victor Sun <victor.sun@intel.com>
Reserve memory for hv sbuf to avoid its possible overwriting on kernel memory.
For apl-up2, move hv_log address to 0x5de00000 to avoid possible conflict with
HV_RAM which start from 0x5e000000;
For nuc6cayh, move HV_RAM_START to 0x20000000 to avoid possible conflict with
hv_log which start from 0x1fe00000;
Tracked-On: #3533
Signed-off-by: Victor Sun <victor.sun@intel.com>
Reviewed-by: Binbin Wu <binbin.wu@intel.com>
For cross-VM S5 notify via vUART, life_mngr service is running on UOS.
It is listening on /dev/ttyS1 to get SOS's commands.
The protocol is: SOS send "shutdown", UOS feedback "acked".
When SOS triggle shutdown, SOS can 1) check VM's status until UOS
stopped, 2) retry shutdown UOS normally with timeout.
So, no matter life_mngr server is running, SOS's shutdown procedure will
properly finish.
Tracked-On: #3564
Signed-off-by: fuyanX <yanx.fu@intel.com>
Acked-by: Yan, Like <like.yan@intel.com>
1. This patch enabled one path for compiling the souce code which
generated by acrn-config tools.
The usage below:
$ make hypervisor BOARD_FILE=$(board.xml) SCENARIO_FILE=$(scenario.xml)
if BOARD_FILE and SCENARIO_FILE are not specified, fallback to previous
compiling hypervisor usage:
$ make hypervisor BOARD=$(board) SCENARIO=$(scenario)
v1-v2:
1). update commit message
Tracked-On: #3602
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Reviewed-by: Binbin Wu <binbin.wu@intel.com>
1. add $(board) xmls which generate by acrn-config/target
acrn-config/target/board_parser.py will generate native board
information and store to $(board).xml
then, acrn-config/board_config/board_cfg_gen.py will use the xml to
generate hypervisor/arch/x86/configs/$(board)/ source file and apply to
the local acrn-hypervisor
2. add $(scenario) xmls for acrn-config/scenario_config to config scenario
acrn-config/scenario_config/scenario_cfg_gen.py will parse scenario xmls and
generate hypervisor/scenarios/$(scenario) source file and apply to the
local acrn-hypervisor
Tracked-On: #3602
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Acked-by: Terry Zou <terry.zou@intel.com>
1.the script will parse the the board information which already
generated, $(scenario).xml modified by user, generate scenario
vm configuration and apply to the acrn-hypervisor source code base.
2.parse cpu/memory/ttys/rootfs information from native os and store it to
the source code
3.implemnt scenario_config and it's usage
usage: scenario_cfg_gen.py --board <board_info_file> -scenario <scenario_info_file>
board_info_file : file name of the board info
scenario_info_file : file name of the scenario info
sample:
$ python3 scenario_cfg_gen.py --board ../board-xmls/apl-mrb.xml
--scenario ../config-xmls/scenarios/sdc.xml
Also improvement board config generate usage:
sample:
$ python3 board_cfg_gen.py --board ../board-xmls/apl-mrb.xml
--scenario ../config-xmls/scenarios/sdc.xml
V1-V2:
1). parse board_setting.xml was removed as these configuration will be
stitch into scenario configuration
2). parse console for different formats
3). parse epc sections
4). add logical partition rootfs
5). support to parse clos, while webui set to None type
6). support to parse bootargs, while webui set to nul
7). convert '-' to '_' for pci sub class name while generating source file
Tracked-On: #3602
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Terry Zou <terry.zou@intel.com>
1. add misc.py to get systemd ram and root device
2. add more specify comments for arguments of functions
v1-v2:
typo: Parser -> Parse
some grammar check
v2-v3:
add the message for Cx state
Tracked-On: #3602
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Terry Zou <terry.zou@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
ACRN tag is ONLY specific to one Clear Linux version.
For the tutorials, we just need to make sure the validated version is functional.
Signed-off-by: lirui34 <ruix.li@intel.com>
Now, we have assumption that SOS control whether the platform
should enter S5 or not. So when SOS tries enter S5, we just
forward the S5 request to native port which make sure platform
S5 is totally aligned with SOS S5.
With higher serverity guest introduced,this assumption is not
true any more. We need to extend the platform S5 process to
handle higher severity guest:
- For DM launched RTVM, we need to make sure these guests
is off before put the whole platfrom to S5.
- For pre-launched VM, there are two cases:
* if os running in it support S5, we wait for guests off.
* if os running in it doesn't support S5, we expect it
will invoke one hypercall to notify HV to shutdown it.
NOTE: this case is not supported yet. Will add it in the
future.
Tracked-On: #3564
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Reviewed-by: Li, Fei1 <fei1.li@intel.com>
do_acpi_s3 actually not limit to do s3 operation. It depends on
the paramters pm1a_cnt_val and pm1b_cnt_val. It could be s3/s5.
Update the function name from xx_s3 to xx_sx.
Tracked-On: #3564
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
new params: --pm_by_vuart is used to set power mananger by vuart
on ACRN; so add it to user guide.
Tracked-On: #3564
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
if RTVM, now we assume it can't be shutdown forcely by SOS, so
add check condition to avoid that.
Tracked-On: #3564
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Acked-by: Yin Fengwei <fengwei.yin@intel.com>
1. for post-launch general VM, like LaaG, the vUART is emulated in DM,
so the power off control channel is:
acrn-dm:pty[master <-> salve] <--> acrn-dm:vUART <--> UOS:vUART
2. for RTVM, like RT-Linux, the vUART is emulated in hypervisor layer,
so the control channel is:
acrn-dm <--> SOS:/dev/ttyS1 <--> Hypervisor <--> UOS:vUART.
So the settings in launch script are different.
Tracked-On: #3564
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Reviewed-by: Binbin Wu <binbin.wu@intel.com>
vuart can be used as communication channel between VMs;
here vuart used to control vm's power off flow; control command
is from SOS to UOS
Tracked-On: #3564
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Acked-by: Yin Fengwei <fengwei.yin@intel.com>
for pty vuart operation will be commonly used by other module,
like pm-vuart: control UOS power off through vuart.
Tracked-On: #3564
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Acked-by: Yin Fengwei <fengwei.yin@intel.com>
Currently nuc7i7dnb board is using default platform acpi info file so causes
S3/S5 not working properly.
This patch updates the correct ACPI info for nuc7i7dnb board.
Tracked-On: #3609
Signed-off-by: Victor Sun <victor.sun@intel.com>
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
The web UI application for ACRN VM configuration tool based on Flask web framework:
1. import board info xml which is generated by acrn-config/target on target boards; or select one
board from the imported list of UI.
2. load scenario settings or import scenario settings from local.
3. edit scenario settings from web UI.
4. export and save the edited scenario setting, the application will prompt error messages from UI
if there are illegal configured items.
5. generate board source code, generate scenario source code.
6. load launch settings or import launch settings from local.
7. edit launch settings from web UI.
8. export and save the edited launch setting; the application will prompt error messages from UI
if there are illegal configurable items
9. generate launch scripts based on current launch setting.
Tracked-On: #3602
Signed-off-by: Shuang Zheng <shuang.zheng@intel.com>
Reviewed-by: Victor Sun <victor.sun@intel.com>
Acked-by: Terry Zou <terry.zou@intel.com>
We seperate the guest power event notify channel out. And now
it's required to give the guest power event notify channel
explicitly. Update the sample launch script to have correct
parameters.
Tracked-On: #3564
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Now, we have two ways to notify guest about power managment
event:
- ioc on MRB platforms
- ACPI power button on other platforms
And we hardcode which one is used now.
In coming change, we will add UART based guest notify method.
We add dm command option to select which method will be used
when launch UOS.
Tracked-On: #3564
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Reviewed-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Wang Yu <yu1.wang@intel.com>
For the code which forwards the native power button event to
guest, they are not related with guest pm related operation
emulation. Move this part of code out of pm.c. And will make
the power button as one possible method to notify guest about
the shutdown operation.
Tracked-On: #3564
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Reviewed-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Wang Yu <yu1.wang@intel.com>
vPCI device should use its virtual configure space to access its BAR after vPCI
device initialized.
This patch also remove corner case "vPCI device will use its 64 bits BAR high idx
to access its BAR base address".
Tracked-On: #3475
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
PCI BAR physical base address will never changed. Cache it to avoid calculating
it every time when we access it.
Tracked-On: #3475
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@Intel.com>
Add the '--logger_setting' parameter information to the 'acrn-dm' parameter
document.
Signed-off-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
Update the .gitignore file to reflect the fact that the tools are now located
under misc/ and no longer under tools/.
One of the temporary folder created during the documentation generation was
doc/tools and it was therefore ignored by Git. It is now better to *not*
ignore it as it will cause documention build issues if such previous folder
exists.
Signed-off-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
Remove the '-p' ("pincpu" option) from the help displayed when calling 'acrn-dm
-h'.
Tracked-On: #3600
Signed-off-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
When we support PCI MSI-X table BAR remapping, we may re-delete the MSI-X table BAR
region. This patch removes strict check for deleting page table mapping.
Tracked-On: #3475
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
The current implement only do "only add a page table mapping for a region when
it's not mapped" check when this page table entry is a PTE entry. However, it
need to do this check for PDPTE entry and PDE entry too.
Tracked-On: #3475
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
pcpu_active_bitmap was read continuously in wait_pcpus_offline(),
acrn_vcpu->running was read continuously in pause_vcpu(),
add volatile keyword to ensure that such accesses are not
optimised away by the complier.
Tracked-On: #1842
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Add Nanlin (@NanlinXie) as a reviewer for ACRN documentation.
Add Terry and Shuang (@terryzouhao @szhen11) as the reviewers for misc component.
Tracked-On: #3419
Signed-off-by: lirui34 <ruix.li@intel.com>
As the pr_dbg will access sbuf which will call stac/clac inside, so can
not put pr_dbg between stac/clac, it will case Page Fault.
acrn_print_request is a debug feature, and it calls pr_dbg. when the
loglevel is set to 6, there will be Page Fault.
So, remove the caller for acrn_print_request and mask the function as
unused, reserved for debug.
Tracked-On: #3648
Signed-off-by: Conghui Chen <conghui.chen@intel.com>
Reviewed-by: Yonghua Huang <yonghua.huang@intel.com>
