DM will use this hypercall to initialize the UOS BSP state.
Tracked-On: #1231
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Use customized function to generate proper config.h
which depend on kconfig,write the customized format
to support it.
V1->V2:
Add comments.
Tracked-On: #861
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
Use genld.sh instead of config.h to generate link_ram.ld.
It can avoid the conflicts of the syntax between ld script and
C.
V1->V2:
change the deps name to config,
Tracked-On: #861
Signed-off-by: Huihuang Shi <huihuang.shi@intel.com>
reviewed-by: Junjie Mao <junjie.mao@intel.com>
From SDM Vol3 26.3.2.5:
Once the virtual interrupt is recognized, it will be delivered in VMX
non-root operation immediately after VM entry(including any specified
event injection) completes.
So the hardware can handle vmcs event injection and evaluation/delivery
of apicv virtual interrupts in one time vm-entry.
This patch move the apicv irr/rvi sync before handle vmcs events
injection. The old code cause the apicv virtual interrupt evaluation and
delivery be handled until next vm-exit if met pending exceptions.
Tracked-On: #1443
Signed-off-by: Yu Wang <yu1.wang@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The vcpu state is initialized outside of init_guest_state:
- SOS BSP state is initialized in SOS loader
- UOS BSP state is initialized in UOS loader
- AP state is initialized during SIPI signal emulation
We could make init_guest_state only update the vcpu state
to VMCS structure.
Tracked-On: #1231
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
NOTE: this patch is only workaround patch for UOS BSP state init.
Eventually, the DM will call hypercall to init UOS BSP state.
We use this workaround patch here to simplify the init_guest_state.
Will make the caller of init_guest_state calls init_guest_vmx
directly.
Tracked-On: #1231
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
We move the SOS BSP state init to vm loader and drop
function init_guest_context_vm0_bsp.
Update the definition of vm0_boot_context to fix code
violations.
Tracked-On: #1231
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
With reset_vcpu_regs as pre-condition, we only need to set
cs_selector and cs_base for AP.
We call set_ap_entry in two places:
1. When emulation AP SIPI
2. When sos BSP resume from S3. The BSP is resumed to real
mode with entry set to wakeup_vec. We call set_ap_entry
API here with entry twisted from wakeup_vec.
Tracked-On: #1231
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This reset_vcpu_regs function will reset the vcpu registers to
default value: realmode with entry 0xFFFFFFF0
Make call to reset_vcpu_regs during create_vcpu and reset_vcpu
Tracked-On: #1231
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
If defined CONFIG_VM0_DESC, HV will use predefined vm0_desc
to config VM0,now it is unneccessary, then remove these code.
Tracked-On: #861
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Li, Fei1 <fei1.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
TR selector initianlization using pre-defined HOST_GDT_RING0_CPU_TSS_SEL
rather than loading from register. Instead calculating real base address
of TSS based on TR selector and gdt, getting it from per cpu data.
Tracked-On: #1394
Signed-off-by: Yang, Yu-chu <yu-chu.yang@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
'target_vm' returned from 'get_vm_from_vmid()' maybe NULL,
passing to 'is_vm0()' without check.
Tracked-On: #861
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
- add missing brackets for 'if/else' statements based on MISRA-C
requirements
v1 -> v2:
* add brackets for each conditions in 'if' statements to improve
the readability
* modify 'ptdev_init' to make the logic clearer
Tracked-On: #861
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
COM1_IRQ's polarity setting is from ACPI table, as hypervisor do not want
to parse ACPI table here, it just get the configuration from vioapic RTE
setting as a work-around.
TODO:
Here should assert vuart irq according to COM1_IRQ polarity. The best way
is to get the polarity info from ACIP table. But we just get the info from
vioapic configuration. Based on this, we can still have irq storm during
guest modify the vioapic setting.
As it's only for debug uart, we want to make it as an known issue.
Tracked-On: https://github.com/projectacrn/acrn-hypervisor/issues/1432
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
In the current hypervisor design, when HPA is not
found for the specified gpa by calling gpa2hpa or
local_gpa2hpa, 0 will be returned as a error code,
but 0 may be a valid HPA for vm0; error checking
is missed when invoking gpa2hpa or local_gpa2hpa;
when invoking lookup_address, the caller guarantees
that parameter pointer pml4_page and pointer pg_size
is not NULL.
If local_gpa2hpa/gpa2hpa returns a invalid HPA,
it means that this function fails to find the
HPA of the specified gpa of vm. If local_gpa2hpa/gpa2hpa
return value is a valid HPA, it means that this
function have found the HPA of the specified gpa of vm.
Each valid vm's EPTP is initialized during vm creating,
vm's EPTP is valid until this vm is destroyed. So the caller
can guarantee parameter pointer pml4_page is not NULL.
The caller uses a temporary variable to store page size.
So the caller can guarantee parameter pointer pg_size
is not NULL.
In this patch, define a invalid HPA for gpa2hpa and
local_gpa2hpa;add some error checking when invoking
local_gpa2hpa/gpa2hpa;add precondition for lookup_address
function and remove redundant error checking.
V1-->V2:
Define INVALID_HPA as a invalid HPA for gpa2hpa
and local_gpa2hpa;
Updated related error checking when invoking
gpa2hpa or local_gpa2hpa;
V2-->V3:
Add some debug information if specified gpa2hpa
mapping doesn't exit and ept_mr_del is called;
Update INVALID_HPA definition easier to be reviewed.
V3-->V4:
Add vm->id and gpa into pr_error;
Add precondition to ept_mr_del to cover [gpa,gpa+size)
unmapping case.
V4-->V5:
Update comments;
Update pr_error message.
Tracked-On: #1258
Signed-off-by: Xiangyang Wu <xiangyang.wu@linux.intel.com>
Reviewed-by: Li, Fei1 <fei1.li@intel.com>
- improve the readability of ept_cap_detect
right shift 32 bits of msr_val to check bits 63:32 of msr_val
Tracked-On: #861
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Because of the return type inconsistent,change the
sbuf return type to uint32_t to fix it,and make the
pre-condition to check the parameter whether is NULL.
V1->V2:
1.add () to bool expression
2.add pre-assumption to sbuf_get and sbuf_put
Tracked-On: #861
Signed-off-by: Huihuang Shi <huihuang.shi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
1.Function return type inconsistent
2.cast on a constant value
V1->V2 add () to return type
V2->V3 keep the sbuf_get and sbuf_put return code
Tracked-On: #861
Signed-off-by: Huihuang Shi <huihuang.shi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Expression should be boolean immediate before 'if','while' key-words.
V1->V2 add () to bool expression
Tracked-On: #861
Signed-off-by: Huihuang Shi <huihuang.shi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Page table operation would not fault except:
1. the hypervisor it out of memory to allcate a page for page table operation
2. there is a bug with page table operation in hypervisor or devicemodle
While we assue that these would not happened in our platform when release, so
there is no need to check whether there is a fault with page table operation. However,
for debug version, we would panic the hypervisor if we can't meet the conditions really.
Tracked-On: #1124
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Sometimes we need to invalidate cached translation information for guest
when change some bits in CR0/CR4 which related to paging. Here're two cases:
1. If there change some bits to enable/disable paging (mode) or access rights.
For CR0: PG/WP/CD/NW; For CR4: PGE/PSE/PAE/SMEP/SMAP/PKE
2. When guest using PAE paging, we should reload the PDPTE registers sometimes,
detail in SDM Vol 3 Chap 4.4.1 and Chap 4.11.1
Tracked-On: #1379
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
add is_long_mode to check whether the processor is operating in IA-32e mode
add is_paging_enabled to check whether paging is enabled
add is_pae to check whether physical address extension is enabled.
Tracked-On: #1379
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Loop the global vm_array[] instead of the vm_list.
Tracked-On: #861
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
-- Replace dynamic memory allocation with static memory
-- Remove the parameter check if the vm is NULL
Tracked-On: #861
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This patch is ready for next one,we will switch from
pointer to embedded structures such as structure vcpu,
some const qualifiers can be improper and raise compilation errors,
this patch remove const qualifier for struct vm.
Tracked-On: #861
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
MISRA-C required the suffix(U), such as:
(1U << 0) ---> (1U << 0U)
This patch will add the suffix(U) to come up MISRA-C.
Tracked-On: #1385
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
vuart irq COM1_IRQ is configured as active low in ACPI table, so using
GSI_FALLING_PULSE.
Tracked-On: #1269
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
add active_polarity to decide what signal to call: GSI_SET_LOW, GSI_SET_HIGH,
GSI_FALLING_PULSE or GSI_RAISING_PULSE.
Tracked-On: #1269
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
a guest may use per-cpu vector allocation mechanism which may lead to
same vector on different vcpu for different vioapic pins.
when we broadcast EOI from vlapic to vioapic, it could trigger
ptdev_intx_ack for incorrect vioapic pin which will lead to incorrect
vioapic irq deassert.
old implementation is recording assert & deassert by acnt, like:
- assert -> acnt++
- deassert -> acnt--
which means an incorrect deassert may descrease acnt from 0 to -1, it leads
to error.
this patch change the recording method for a pin assert/deassert, it
just use pin_state bit set/clear to indicate line state:
- high -> pin_state bitmap set
- low -> pin_state bitmap clear
and the irq assert will be triggered based on polarity setting during line
state changing.
it can avoid the failure of incorrect deassert on old implementation, and for
ptdev sharing irq, the dev hardware could re-trigger interrupt after deassert.
but for emulated device, there is no mechanism to re-trigger interrupt if
there is irq sharing - for DM, we already has constraint to restrict vGSI
sharing, so there is no problem of it.
Tracked-On: #1269
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
There are chances that names with leading underscore declared by
developers are conflict with the ones reserved for the compiler.
What this patch does:
- rename these functions/variables/macros starting with
underscore to avoid such unintentational mistakes.
- remove gpr.h without any contents
Tracked-On: #861
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Commit 6085781 replaced __emalloc() with a call to uefi allocate_page()
and allows UEFI FW to allocate memory for hypervisor from high to low
address below 4GB. However, this change triggers an issue (might be
memory corruption), in turn, PXE boot cannot work.
Since root cause the issue might take some time, the PXE boot issue
blocks auto-test, we disable hypervisor relocation by default for the
time being in config option, and users can enable it by themselves. In
the following weeks, if we root cause the issue, we can re-enable
relocation feature.`
Tracked-On: #1371
Signed-off-by: Chaohong guo <chaohong.guo@intel.com>
The patch is replace irq_static_mappings type from 2 dimension array
into structure and one dimension array.
Tracked-On: #1375
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Reviewed-by: Jason Chen <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Move struct acrn_vcpu_regs, acrn_descriptor_ptr and
acrn_gp_regs to acrn_common.h. The struct acrn_vcpu_regs
will be used as parameter of hypercall
Tracked-On: #1231
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Doxygen API comment added to hypercall.h was incorrect causing the doc
build process to fail with a warning (parameter not documented).
Fixes: #1353
Tracked-On: #1353
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
For SBL platform, struct acrn_vcpu_regs are used as boot context.
Now the boot_ctx is only for UEFI platform. Rename struct boot_ctx
to efi_context.
Tracked-On: #1231
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Add struct acrn_vcpu_regs and make struct boot_ctx based on
struct acrn_vcpu_regs.
vm0_boot_context is also changed from struct boot_ctx to struct
acrn_vcpu_regs.
Tracked-On: #1231
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
We will define the hypercall to set acrn vcpu registers and
move this struct to acrn_commmon.h for reference from hypercall
parameter definition.
Tracked-On: #1231
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
struct seg_desc_vmcs is actually for segment descriptor vmcs fields.
Change its name to vmcs_seg_field
Tracked-On: #1231
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The printf related functions have been called by other various
functions, e.g. get_ptdev_info(), get_ioapic_info, etc. The patch
is used to clear up the usage.
Tracked-On: #861
Signed-off-by: Junjun Shan <junjun.shan@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Current free_irq sequence will release vector first, then use the
released vector to free irq number.It will cause irq leak for MSI IRQ.
At present, there is no one to free the irqs which in irq_static_mappings,
So this patch will only make sure free non-gsi irqs.
Tracked-On: #1359
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Timer IRQ was static mapped IRQ.
It should not be cleaned up when one of the cpu dead.
The patch will retain the timer irq.
Tracked-On: #1359
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Replace dynamic allocation for vuart rx/tx buffer
with static array.
v2-->v3:
-- Reduce the size of vuart tx buffer from 64K to 8K
-- For non-partition mode, will use global rx/tx buffer,
for partition mode, will use per VM rx/tx buffer.
-- Change several APIs to inline
v1-->v2:
-- Move vuart rx/tx buffer into acrn_vuart data structure
Tracked-On: #861
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Li, Fei1 <fei1.li@intel.com>
Reviewed-by: Anthony Xu <anthony.xu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
In hypervisor, all the parameter and return value printf related are
unsigned int, this patch is used to fix the function definitions.
v1->v2:
*Modify the return value of various functions, such as printf(),
vprintf(), charout(), do_printf(), charmem, print_pow2(),
print_decimal to void due to never used, no necessary to use,
or has already returned by param.
*Delete the impossible judgement of param->emit due to the type
is unsigned.
Tracked-On: #861
Signed-off-by: Junjun Shan <junjun.shan@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
MISRA-C states that a void procedure used in expressions is dangerous.
This patch removes the improper 'return' when calling the void procedure
'send_dest_ipi'.
Tracked-On: #861
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
- replace vpic/vioapic_xassert_irq() APIs
with vpic/vioapic_set_irq()
- unify the description of IRQ/PIN state in vpic. & vioapic.c
Tracked-On: #861
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
1. The wrong operand size is assigned in instruction decode phase
if the operand size is 1 byte.
According to the SDM, the bit 0(w bit) of opcode should be checked
first to detect whether the operand size is 1 byte. Then, check
whether there is prefix to overwrite the default operand size.
The original instruction decode doesn't care about the operand
size. But do opsize fixup during instruction emulation phase.
With ACRN we need operand size packed to ioreq and send to DM
after instruction decode.
2. We should always touch the GPA by following opsize to avoid side
effect (especially when GPA is for a MMIO).
Tracked-On: #1337
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
