Let's just print "to the registry" instead of printing "to quay.io", as
the registry used is not tied to quay.io.
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
Two different kernel build targets (build,install) have both instructions to
build the kernel, hence it was executed twice. Install should only do
install and build should only do build.
Fixes: #6588
Signed-off-by: Zvonko Kaiser <zkaiser@nvidia.com>
Add osbuilder support to build a rootfs and image
based on the CBL-Mariner Linux distro
Fixes: #6462
Signed-off-by: Dallas Delaney <dadelan@microsoft.com>
The kata-deploy install method tried to `chmod +x /opt/kata/runtime-rs/bin/*` but it isn't
always true that /opt/kata/runtime-rs/bin/ exists. For example, the
s390x payload does not build the kernel-dragonball-experimental
artifacts. So let's ensure the dir exist before issuing the command.
Fixes#6494
Signed-off-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
The function is returning "" when called from the script used to cache
the artefacts and one difference noted between this version and the
already working one from the CCv0 is that we make sure to `pushd
${repo_root_dir}` in the CCv0 version.
Let's give it a try here and see if it solves the issue.
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
As we've added the support for caching components, let's use them
whenever those are available.
Fixes: #6480
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
Signed-off-by: Gabriela Cervantes <gabriela.cervantes.tellez@intel.com>
As we've added the support for caching components, let's use them
whenever those are available.
Fixes: #6480
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
Signed-off-by: Gabriela Cervantes <gabriela.cervantes.tellez@intel.com>
As we've added the support for caching components, let's use them
whenever those are available.
Fixes: #6480
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
Signed-off-by: Gabriela Cervantes <gabriela.cervantes.tellez@intel.com>
As we've added the support for caching components, let's use them
whenever those are available.
Fixes: #6480
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
Signed-off-by: Gabriela Cervantes <gabriela.cervantes.tellez@intel.com>
As we've added the support for caching components, let's use them
whenever those are available.
Fixes: #6480
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
Signed-off-by: Gabriela Cervantes <gabriela.cervantes.tellez@intel.com>
As we've added the support for caching components, let's use them
whenever those are available.
Fixes: #6480
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
Signed-off-by: Gabriela Cervantes <gabriela.cervantes.tellez@intel.com>
As we've added the support for caching components, let's use them
whenever those are available.
Fixes: #6480
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
Signed-off-by: Gabriela Cervantes <gabriela.cervantes.tellez@intel.com>
As we've added the support for caching components, let's use them
whenever those are available.
Fixes: #6480
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
Signed-off-by: Gabriela Cervantes <gabriela.cervantes.tellez@intel.com>
Let's add support for caching VirtioFS artefacts that are generated using
the kata-deploy local-build scripts.
Right now those are not used, but we'll switch to using them very soon
as part of upcoming changes of how we build the components we test in
our CI.
Fixes: #6480
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
Signed-off-by: Gabriela Cervantes <gabriela.cervantes.tellez@intel.com>
Let's add support for caching shim v2 artefacts that are generated using
the kata-deploy local-build scripts.
Right now those are not used, but we'll switch to using them very soon
as part of upcoming changes of how we build the components we test in
our CI.
Fixes: #6480
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
Signed-off-by: Gabriela Cervantes <gabriela.cervantes.tellez@intel.com>
Let's add support for caching RootFS artefacts that are generated using
the kata-deploy local-build scripts.
Right now those are not used, but we'll switch to using them very soon
as part of upcoming changes of how we build the components we test in
our CI.
Fixes: #6480
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
Signed-off-by: Gabriela Cervantes <gabriela.cervantes.tellez@intel.com>
Let's add support for caching QEMU artefacts that are generated using
the kata-deploy local-build scripts.
Right now those are not used, but we'll switch to using them very soon
as part of upcoming changes of how we build the components we test in
our CI.
Fixes: #6480
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
Signed-off-by: Gabriela Cervantes <gabriela.cervantes.tellez@intel.com>
Let's add support for caching Nydus artefacts that are generated using
the kata-deploy local-build scripts.
Right now those are not used, but we'll switch to using them very soon
as part of upcoming changes of how we build the components we test in
our CI.
Fixes: #6480
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
Signed-off-by: Gabriela Cervantes <gabriela.cervantes.tellez@intel.com>
Let's add support for caching Kernel artefacts that are generated using
the kata-deploy local-build scripts.
Right now those are not used, but we'll switch to using them very soon
as part of upcoming changes of how we build the components we test in
our CI.
Fixes: #6480
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
Signed-off-by: Gabriela Cervantes <gabriela.cervantes.tellez@intel.com>
Let's add support for caching Firecracker artefacts that are generated
using the kata-deploy local-build scripts.
Right now those are not used, but we'll switch to using them very soon
as part of upcoming changes of how we build the components we test in
our CI.
Fixes: #6480
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
Signed-off-by: Gabriela Cervantes <gabriela.cervantes.tellez@intel.com>
Let's add support for caching Cloud Hypervisor artefacts that are
generated using the kata-deploy local-build scripts.
Right now those are not used, but we'll switch to using them very soon
as part of upcoming changes of how we build the components we test in
our CI.
Fixes: #6480
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
Signed-off-by: Gabriela Cervantes <gabriela.cervantes.tellez@intel.com>
Let's adjust the kernel names in versions.yaml so those can match the
names used as part of the kata-deploy local build scripts.
Right now this doesn't bring any benefit nor drawback, but it'll make
our life easier later on in this same series.
Depends-on: github.com/kata-containers/tests#5534
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
The last remaining user of the TRAVIS variable in this repo is
tools/osbuilder/tests and it is only used to skip spinning up VMs. Travis
didn't support virtualization and the same is true for github actions hosted
runners. Replace the variable with KVM_MISSING and determine availability of
/dev/kvm at runtime.
TRAVIS is also used by '.ci/setup.sh' in kata-containers/tests to reduce the
set of dependencies that gets installed, but this is also in the process of
being removed.
Fixes: #3544
Signed-off-by: Jeremi Piotrowski <jpiotrowski@microsoft.com>
There's no need to pass repo_root_dir to get_last_modification() as the
variable used everywhere is exported from that very same file.
Fixes: #6431
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
This is used in several parts of the code, and can have a single
declaration as part of the `lib.sh` file, which is already imported by
all the places where it's used.
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
Now that we've switched the base container image to using Ubuntu instead
of CentOS, we don't need any kind of extra logic to correctly build the
image for different architectures, as Ubuntu is a multi-arch image that
supports all the architectures we're targetting.
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
Let's make sure we use a multi-arch image for building kata-deploy.
A few changes were also added in order to get systemd working inside the
kata-deploy image, due to the switch from CentOS to Ubuntu.
Fixes: #6358
Signed-off-by: SinghWang <wangxin_0611@126.com>
As part of bd1ed26c8d, we've pointed to
the Dockerfile that's used in the CC branch, which is wrong.
For what we're doing on main, we should be pointing to the one under the
`kata-deploy` folder, and not the one under the non-existent
`kata-deploy-cc` one.
Fixes: #6343
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
As the image provided as part of registry.centos.org is not a multi-arch
one, at least not for CentOS 7, we need to expand the script used to
build the image to pass images that are known to work for s390x (ClefOS)
and aarch64 (CentOS, but coming from dockerhub).
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
Let's break the IMAGE build parameter into BASE_IMAGE_NAME and
BASE_IMAGE_TAG, as it makes it easier to replace the default CentOS
image by something else.
Spoiler alert, the default CentOS image is **not** multi-arch, and we do
want to support at least aarch64 and s390x in the near term future.
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
For the architectures we know that `make kata-tarball` works as
expected, let's start publishing the kata-deploy payload after each
merge.
This will help to:
* Easily test the content of current `main` or `stable-*` branch
* Easily bisect issues
* Start providing some sort of CI/CD content pipeline for those who
need that
This is a forward-port work from the `CCv0` and groups together patches
that I've worked on, with the work that Choi did in order to support
different architectures.
Fixes: #6343
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
Adding kernel config to sev case since it is needed for SNP and SNP will use the SEV kernel.
Incrementing kernel config version to reflect changes
Fixes: #6123
Signed-off-by: Alex Carter <Alex.Carter@ibm.com>
Following Jong Wu suggestion, let's link /usr/bin/musl-gcc to
/usr/bin/aarch64-linux-musl-gcc.
Fixes: #6320
Signed-off-by: SinghWang <wangxin_0611@126.com>
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
This reverts commit 9d78bf9086.
Golang binaries are built statically by default, unless linking against
CGO, which we do. In this case we dynamically link against glibc,
causing us troubles when running a binary built with Ubuntu 22.04 on
Ubuntu 20.04 (which will still be supported for the next few years ...)
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
When starting an initrd the kernel expects to find /dev/console in the initrd,
so that it can connect it as stdin/stdout/stderr to the /init process. If the
device node is missing the kernel will complain that it was unable to open an
initial console. If kata-agent is the initrd init process, it will also result
in log messages not being logged to console and thus not forwarded to host
syslog.
Add a set of standard device nodes for completeness, so that console logging
works. To do that we install the makedev packge which provides a MAKEDEV helper
that knows the major/minor numbers. Unfortunately the debian package tries to
create devnodes from postinst, which can be suppressed if systemd-detect-virt
is present. That's why we create a small dummy script that matches what
systemd-detect-virt would output (anything is enough to suppress mknod).
Fixes: #6261
Signed-off-by: Jeremi Piotrowski <jpiotrowski@microsoft.com>
Let's bump the base container image to use the 22.04 version of Ubuntu,
as it does bring up-to-date package dependencies that we need to
statically build the runtime-rs on aarch64.
Fixes: #6320
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
This, combined with the effort of caching builder images *and* only
performing the build itself inside the builder images, is the very first
step for reproducible builds for the project.
Reproducible builds are quite important when we talk about Confidential
Containers, as users may want to verify the content used / provided by
the CSPs, and this is the first step towards that direction.
Fixes: #5517
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
Let's first try to pull a pre-existing image, instead of building our
own, to be used as a builder image for the td-shim.
This will save us some CI time.
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
Let's first try to pull a pre-existing image, instead of building our
own, to be used as a builder image for the td-shim.
This will save us some CI time.
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
Let's add the needed infra for building and pushing the OVMF builder
image to the Kata Containers' quay.io registry.
Fixes: #5477
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
Let's first try to pull a pre-existing image, instead of buildinf our
own, to be used as a builder image for OVMF.
This will save us some CI time.
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
Let's add the needed infra for only building and pushing the QEMU
builder image to the Kata Containers' quay.io registry.
Fixes: #5481
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
Let's first try to pull a pre-existsing image, instead of building our
own, to be used as a builder image for QEMU.
This will save us some CI time.
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
Let's add the needed infra for only building and pushing the virtiofsd
builder image to the Kata Containers' quay.io registry.
Fixes: #5480
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
Let's first try to pull a pre-existing image, instead of building our
own, to be used as a builder image for the virtiofsd.
This will save us some CI time.
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
Let's ensure we're building virtiofsd with a specific toolchain that's
known to not cause any issues, instead of always using the latest one.
On each bump of the virtiofsd, we'll make sure to adjust this according
to what's been used by the virtiofsd community.
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
Let's add the needed infra for only building and pushing the shim-v2
builder image to the Kata Containers' quay.io registry.
Fixes: #5478
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
Let's try to pull a pre-existing image, instead of building our own, to
be used as a builder for the shim-v2.
This will save us some CI time.
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
Let's add the needed infra for only building and pushing the kernel
builder image to the Kata Containers' quay.io registry.
Fixes: #5476
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
Let's first try to pull a pre-existing image, instead of building our
own, to be used as a builder image for the kernel.
This will save us some CI time.
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
This function will push a specific tag to a registry, whenever the
PUSH_TO_REGISTRY environment variable is set, otherwise it's a no-op.
This will be used in the future to avoid replicating that logic in every
builder used by the kata-deploy scripts.
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
Let's add a function to get the hash of the last commit modifying a
specific file.
This will help to avoid writing `git rev-list ...` into every single
build script used by the kata-deploy.
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
BUILD_REGISTRY, which points to quay.io/kata-containers/builder, will be
used for storing the builder images used to build the artefacts via the
kata-deploy scripts.
The plan is to tag, whenever it's possible and makes sense, images like:
* ${BUILDER_REGISTRY}:${component}-${unique_identifier}
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
In the `install_go_rust.sh` file we're adding a
x86_64-unknown-linux-musl target unconditionally. That should be,
instead, based in the ARCH of the host and the appropriate LIBC to be
used with that host.
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
Let's not try to sed a file that doesn't exist, which may be the case
depending on the architecture we're building the shim-v2 for.
This is a partial-forward port of
f24c47ea47.
Fixes: #6293
Signed-off-by: Hyounggyu Choi <Hyounggyu.Choi@ibm.com>
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
This is to install a missing binary protoc in shim-v2 Dockerfile.
Fixes: #6244
Signed-off-by: Hyounggyu Choi <Hyounggyu.Choi@ibm.com>
(cherry picked from commit 10603e3def)
For kata containers, rootfs is used in the read-only way.
EROFS can noticably decrease metadata overhead.
On the basis of supporting the EROFS file system, it supports using the config parameter to switch the file system used by rootfs.
Fixes: #6063
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Signed-off-by: yaoyinnan <yaoyinnan@foxmail.com>
We already have verbose output while merging the builds from various
build targets. Getting rid of verbose output to speed up.
Signed-off-by: Archana Shinde <archana.m.shinde@intel.com>
The .dracut_rootfs.done file is accidentally being picked up as the default
target, regardless of BUILD_METHOD. Move the 'all' target definition up, so
that it's the default (=first) target in the makefile. Additionally make the
.dracut_rootfs.done target conditional on the right BUILD_METHOD being
selected, as building it doesn't make sense with BUILD_METHOD=distro.
Fixes: #6235
Signed-off-by: Jeremi Piotrowski <jpiotrowski@microsoft.com>
This is to make a docker version to v20.10 in docker upstream image ubuntu:20.04 for s390x and ppc64le.
Fixes: #6211
Signed-off-by: Hyounggyu Choi <Hyounggyu.Choi@ibm.com>
Update Readme to instruct users to increment the kata config version
for any changes made to configs or patches under packaging/kernel.
Signed-off-by: Archana Shinde <archana.m.shinde@intel.com>
link-self-contained is not supported on ppc64le rust target.
Hence, do not pass it while building virtiofsd.
Fixes: #6195
Signed-off-by: Amulyam24 <amulmek1@in.ibm.com>
As Chao Wu added the support for building the dragonball kernel as a new
experimental kernel, let's make sure we reflect that as part of the
kata-deploy build scripts.
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
As QEMU released its v7.2.0 version in December last year, last do the
bump on our side.
A few configuration options have been removed between the v6.2.0 (the
version we currently use) and v7.2.0, so those have also been dropped
from our configure-hypervison.sh script (for this specific version).
Also, we're explicitly setting --disable-virtiofsd for the platforms
that we're testing using the rust version.
See: a8d6abe129/docs/about/deprecated.rst (virtiofsd)Fixes: #6102
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
This PR fixes the indentation for setup aks script being used
in tools.
Fixes#6013
Signed-off-by: Gabriela Cervantes <gabriela.cervantes.tellez@intel.com>
Add some new ignore items to avoid local builds that cause git to track a lot of files
Fixes: #5900
Signed-off-by: Binbin Zhang <binbin36520@gmail.com>
In order to let upcall being used by Kata Container, we need to add
those patches into kernel build script.
Currently, only when experimental (-e) and hypervisor type dragonball
(-t dragonball) are both enabled, that the upcall patches will be
applied to build a 5.10 guest kernel.
example commands: sh ./build-kernel.sh -e -t dragonball -d setup
fixes: #5642
Signed-off-by: Chao Wu <chaowu@linux.alibaba.com>
Upcall is a direct communication tool between VMM and guest developed
upon vsock. The server side of the upcall is a driver in guest kernel
(kernel patches are needed for this feature) and it'll start to serve
the requests after the kernel starts. And the client side is in
Dragonball VMM , it'll be a thread that communicates with vsock through
uds.
We want to keep the lightweight of the VM through the implementation of
the upcall, through which we could achieve vCPU hotplug, virtio-mmio
hotplug without implementing complex and heavy virtualization features
such as ACPI virtualization.
fixes: #5642
Signed-off-by: Chao Wu <chaowu@linux.alibaba.com>
If a pod of kata is deployed on a machine, after the machine restarts, the pod status of kata-deploy will be CrashLoopBackOff.
Fixes: #5868
Signed-off-by: SinghWang <wangxin_0611@126.com>
For now, rng init is too slow for kata3.0/dragonball. Enable
random_trust_cpu can speed up rng init when kernel boot.
Fixes: #5870
Signed-off-by: Jianyong Wu <jianyong.wu@arm.com>
Create a guest image to support SELinux for containers inside the guest
if `SELINUX=yes` is specified. This works only if the guest rootfs is
CentOS and the init service is systemd, not the agent init. To enable
labeling the guest image on the host, selinuxfs must be mounted on the
host. The kata-agent will be labeled as `container_runtime_exec_t` type.
Fixes: #4812
Signed-off-by: Manabu Sugimoto <Manabu.Sugimoto@sony.com>
Add kernel configs related to SELinux in order to add the
support for containers running inside the guest.
Fixes: #4812
Signed-off-by: Manabu Sugimoto <Manabu.Sugimoto@sony.com>
This PR removes extra tab spaces from the kata deploy binaries
script.
Fixes#5747
Signed-off-by: Gabriela Cervantes <gabriela.cervantes.tellez@intel.com>
CONFIG_X86_SGX is introduced after kernel 5.11, and that config is a
default x86_64 config for Kata build-kernel.sh script.
But if we use -v to specify any kernel version below 5.11 will cause an
inevitable error because CONFIG_X86_SGX is not supported in older
kernels and that may cause problem for the situation if we need kernel
version below 5.11.
So I propose to put CONFIG_X86_SGX into whitelist.conf to avoid break
building guest kernel below 5.11.
fixes: #5741
Signed-off-by: Chao Wu <chaowu@linux.alibaba.com>
This PR fixes the indentation of the build static firecracker script.
Fixes#5663
Signed-off-by: Gabriela Cervantes <gabriela.cervantes.tellez@intel.com>
This Pr removes single spaces and fix the indentation of the script.
Fixes#5630
Signed-off-by: Gabriela Cervantes <gabriela.cervantes.tellez@intel.com>
This Pr removes single spaces and fix the indentation of the script.
Fixes#5528
Signed-off-by: Gabriela Cervantes <gabriela.cervantes.tellez@intel.com>
The compile option link-self-contained=yes asks rustc to use
C library startup object files that come with the compiler,
which are not available on the target s390x-unknown-linux-gnu.
A build does not contain any startup files leading to a
broken executable entry point (causing segmentation fault).
Fixes: #5522
Signed-off-by: Hyounggyu Choi <Hyounggyu.Choi@ibm.com>
1. Implemented a rust module for operating cgroups through systemd with the help of zbus (src/agent/rustjail/src/cgroups/systemd).
2. Add support for optional cgroup configuration through fs and systemd at agent (src/agent/rustjail/src/container.rs).
3. Described the usage and supported properties of the agent systemd cgroup (docs/design/agent-systemd-cgroup.md).
Fixes: #4336
Signed-off-by: Yuan-Zhuo <yuanzhuo0118@outlook.com>
Differently than every single other bit that's part of our repo, QEMU
has been using a single Dockerfile that prepares an environment where
the project can be built, but *also* building the project as part of
that very same Dockerfile.
This is a problem, for several different reasons, including:
* It's very hard to have a reproducible build if you don't have an
archived image of the builder
* One cannot cache / ipload the image of the builder, as that contains
already a specific version of QEMU
* Every single CI run we end up building the builder image, which
includes building dependencies (such as liburing)
Let's split the logic into a new build script, and pass the build script
to be executed inside the builder image, which will be only responsible
for providing an environment where QEMU can be built.
Fixes: #5464
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
When moving to building the CI artefacts using the kata-deploy scripts,
we've noticed that the build would fail on any machine where the tarball
wasn't officially provided.
This happens as rust is missing from the 1st layer container. However,
it's a very common practice to leave the 1st layer container with the
minimum possible dependencies and install whatever is needed for
building a specific component in a 2nd layer container, which virtiofsd
never had.
In this commit we introduce the second layer containers (yes,
comtainers), one for building virtiofsd using musl, and one for building
virtiofsd using glibc. The reason for taking this approach was to
actually simplify the scripts and avoid building the dependencies
(libseccomp, libcap-ng) using musl libc.
Fixes: #5425
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
The previously used repo will be removed by Intel, as done with the one
used for TDX kernel. The TDX team has already worked on providing the
patches that were hosted atop of the QEMU commit with the following hash
4c127fdbe81d66e7cafed90908d0fd1f6f2a6cd0 as a tarball in the
https://github.com/intel/tdx-tools repo, see
https://github.com/intel/tdx-tools/pull/162.
On the Kata Containers side, in order to simplify the process and to
avoid adding hundreds of patches to our repo, we've revived the
https://github.com/kata-containers/qemu repo, and created a branch and a
tag with those hundreds of patches atop of the QEMU commit hash
4c127fdbe81d66e7cafed90908d0fd1f6f2a6cd0. The branch is called
4c127fdbe81d66e7cafed90908d0fd1f6f2a6cd0-plus-TDX-v3.1 and the tag is
called TDX-v3.1.
Knowing the whole background, let's switch the repo we're getting the
TDX QEMU from.
Fixes: #5419
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
The previously used repo has been removed by Intel. As this happened,
the TDX team worked on providing the patches that were hosted atop of
the v5.15 kernel as a tarball present in the
https://github.com/intel/tdx-tools repos, see
https://github.com/intel/tdx-tools/pull/161.
On the Kata Containers side, in order to simplify the process and to
avoid adding ~1400 kernel patches to our repo, we've revived the
https://github.com/kata-containers/linux repo, and created a branch and
a tag with those ~1400 patches atop of the v5.15. The branch is called
v5.15-plus-TDX, and the tag is called 5.15-plus-TDX (in order to avoid
having to change how the kernel builder script deals with versioning).
Knowing the whole background, let's switch the repo we're getting the
TDX kernel from.
Fixes: #5326
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
In order to ensure that the proxy configuration is passed to the 2nd
layer container, let's ensure the $HOME/.docker/config.json file is
exposed inside the 1st layer container.
For some reason which I still don't fully understand exporting
https_proxy / http_proxy / no_proxy was not enough to get those
variables exported to the 2nd layer container.
In this commit we're creating a "$HOME/.docker" directory, and removing
it after the build, in case it doesn't exist yet. The reason we do this
is to avoid docker not running in case "$HOME/.docker" doesn't exist.
This was not tested with podman, but if there's an issue with podman,
the issue was already there beforehand and should be treated as a
different problem than the one addressed in this commit.
Fixes: #5077
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
Shell expands `*"rc"*` to the top-level `src` directory. This results
in comparing a version with a directory name. This doesn't make sense
and causes the script to choose the wrong branch of the `if`.
The intent of the check is actually to detect `rc` in the version.
Fixes: #5283
Signed-off-by: Greg Kurz <groug@kaod.org>
To avoid the random failures when we are building the rootfs as it seems
that it does not find the value for the libseccomp and gperf directory,
this PR export these variables.
Fixes#5232
Signed-off-by: Gabriela Cervantes <gabriela.cervantes.tellez@intel.com>
As 3.0.0-rc0 has been released, let's switch the kata-deploy / kata-cleanup
tags back to "latest", and re-add the kata-deploy-stable and the
kata-cleanup-stable files.
Signed-off-by: Peng Tao <bergwolf@hyper.sh>
Developer-Guide.md is updated to work using current golang versions.
Related Readmes are also updated.
Signed-off-by: Joana Pecholt <joana.pecholt@aisec.fraunhofer.de>
kata-deploy files must be adapted to a new release. The cases where it
happens are when the release goes from -> to:
* main -> stable:
* kata-deploy-stable / kata-cleanup-stable: are removed
* stable -> stable:
* kata-deploy / kata-cleanup: bump the release to the new one.
There are no changes when doing an alpha release, as the files on the
"main" branch always point to the "latest" and "stable" tags.
Signed-off-by: Peng Tao <bergwolf@hyper.sh>
In the commit 54d6d01754 we ended up
removing the BUILD_SUFFIX argument passed to QEMU as it only seemed to
be used to generate the HYPERVISOR_NAME and PKGVERSION, which were added
as arguments to the dockerfile.
However, it turns out BUILD_SUFFIX is used by the `qemu-build-post.sh`
script, so it can rename the QEMU binary accordingly.
Let's just bring it back.
Fixes: #5078
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
Dockerfile cannot decipher multiple conditional statements in the main RUN call.
Cannot segregate statements in Dockerfile with '{}' braces without wrapping entire statement in 'bash -c' statement.
Dockerfile does not support setting variables by bash command.
Must set HYPERVISOR_NAME and PKGVERSION from parent script: build-base-qemu.sh
Fixes: #5078
Signed-Off-By: Ryan Savino <ryan.savino@amd.com>
00aadfe20a introduced a regression on
`make cc-tdx-kernel-tarball` as we stopped passing all the needed
information to the `build-kernel.sh` script, leading to requiring `yq`
installed in the container used to build the kernel.
This commit partially reverts the faulty one, rewritting it in a way the
old behaviour is brought back, without changing the behaviour that was
added by the faulty commit.
Fixes: #5043
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
This removes two options that are not needed (any longer). These
are not set for any kernel so they do not need to be ignored either.
Fixes#5035
Signed-off-by: Joana Pecholt <joana.pecholt@aisec.fraunhofer.de>
Guest log is showing a hang on systemd getty start.
Adding symlink for /dev/ttyS0 resolves issue.
Fixes: #4932
Signed-Off-By: Ryan Savino <ryan.savino@amd.com>
TDX kernel is based on a kernel version which doesn't have the
CONFIG_SPECULATION_MITIGATIONS option.
Having this in the allow list for missing configs avoids a breakage in
the TDX CI.
Fixes: #4998
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
Fix threading conflicts when kata-deploy 'make kata-tarball' is called.
Force the creation of rootfs tarballs to happen serially instead of in parallel.
Fixes: #4787
Signed-Off-By: Ryan Savino <ryan.savino@amd.com>
Kata guest os cgroup is not work properly kata guest kernel config option
CONFIG_CGROUP_HUGETLB is not set, leading to:
root@clr-b08d402cc29d44719bb582392b7b3466 ls /sys/fs/cgroup/hugetlb/
ls: cannot access '/sys/fs/cgroup/hugetlb/': No such file or directory
Fixes: #4953
Signed-off-by: Miao Xia <xia.miao1@zte.com.cn>
kernel: Update SEV guest kernel to 5.19.2
Kernel 5.19.2 has all the needed patches for running SEV, thus let's update it and stop using the version coming from confidential-containers.
Signed-Off-By: Ryan Savino <ryan.savino@amd.com>
It would be nice to use `versions.yaml` for the maintainability.
Previously, we have been specified the `libseccomp` and the `gperf` version
directly in this script without using the `versions.yaml` because the current
snap workflow is incomplete and fails.
This is because snap CI environment does not have kata-cotnainers repository
under ${GOPATH}. To avoid the failure, the `rootfs.sh` extracts the libseccomp
version and url in advance and pass them to the `install_libseccomp.sh` as
environment variables.
Fixes: #4941
Signed-off-by: Manabu Sugimoto <Manabu.Sugimoto@sony.com>
The clone_tests_repo() in ci/lib.sh relies on CI variable to decide
whether to checkout the tests repository or not. So it is required to
pass that variable down to the build container of kata-deploy, otherwise
it can fail on some scenarios.
Fixes#4949
Signed-off-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
The install_yq.sh is copied to tools/packaging/kata-deploy/local-build/dockerbuild
so that it is added in the kata-deploy build image. Let's tell git to
ignore that file.
Signed-off-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
The file was added as part of the commit that tested this changes in the
CCv0 branch, but forgotten when re-writing it to the `main` branch.
Fixes: #4841
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
Let's create the td-shim tarball in the directory where the script was
called from, instead of doing it in the $DESTDIR.
This aligns with the logic being used for creating / extracting the
tarball content, which is already in use by the kata-deploy local build
scripts.
Fixes: #4809
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
Let's create the OVMF tarball in the directory where the script was
called from, instead of doing it in the $DESTDIR.
This aligns with the logic being used for creating / extracting the
tarball content, which is already in use by the kata-deploy local build
scripts.
Fixes: #4808
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
The latest kernel with TDX support should be pulled from a different
repo (https://github.com/intel/linux-kernel-dcp, instead of
https://github.com/intel/tdx), and the latest version to be used is
SPR-BKC-PC-v9.6.
With the new version being used, let's make sure we enable the
INTEL_TDX_ATTESTATION config option, and all the dependencies needed to
do so.
Fixes: #4803
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
Let's just re-order the TDX configs alphabetically. No new config has
been added or removed, thus no need to bump the kernel version.
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
TDVF is the firmware used by QEMU to start TDX capable VMs. Let's start
tracking it as it'll become part of the Confidential Containers sooner
or later.
TDVF lives in the public https://github.com/tianocore/edk2-staging repo
and we're using as its version tags that are consumed internally at
Intel.
Fixes: #4624
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
Instead of having as a result the directory where OVMF artefacts where
installed, let's follow what we do with the other components and have a
tarball as a result of the OVMF build.
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
Instead of cloning the repo, and then switching to a specific branch,
let's take advantage of `--branch` and directly clone the specific
branch / tag.
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
As TDVF comes from a different repo, the edk2-staging one, we cannot
simply hardcode the name. Instead, let's get the name of the directory
from name of the git repo.
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
TD-shim is a simplified TDX virtual firmware, used by Cloud Hypervisor,
in order to create a TDX capable VM.
TD-shim is heavily under development, and is hosted as part of the
Confidential Containers project:
https://github.com/confidential-containers/td-shim
The version chosen for this commit, is a version that's being tested
inside Intel, but we, most likely, will need to change it before we have
it officially packaged as part of an official release.
Fixes: #4779
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
io_uring is a Linux API for asynchronous I/O introduced in qemu 5.0.
It is designed to better performance than older aio API.
We could leverage this in order to get better storage performance.
We should be adding liburing-dev to qemu build to leverage this feature.
However liburing-dev package is not available in ubuntu 20.04,
it is avaiable in 22.04.
Upgrading the ubuntu version in the dockerfile to 22.04 is causing
issues in the static qemu build related to libpmem.
So instead we are building liburing from source until those build issues
are solved.
Fixes: #4645
Signed-off-by: Archana Shinde <archana.m.shinde@intel.com>
Currently $BUILD_DIR will be used to create a directory as:
/opt/kata/share/kata-qemu${BUILD_DIR}
It means that when passing a BUILD_DIR, like "foo", a name would be
built like /opt/kata/share/kata-qemufoo
We should, instead, be building it as /opt/kata/share/kata-qemu-foo.
Fixes: #4638
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
Instead of always naming the binary as "-experimental", let's take
advantage of the $BUILD_SUFFIX that's already passed and correctly name
the binary according to it.
Fixes: #4638
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
Passing the URL to be used to download the kernel tarball is useful in
various scenarios, mainly when doing a downstream build, thus let's add
this new option.
This new option also works around a known issue of the Dockerfile used
to build the kernel not having `yq` installed.
Fixes: #4629
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
There's no need to have the entire function for building SEV / TDX
duplicated.
Let's remove those functions and create a `get_tee_kernel()` which takes
the TEE as the argument.
Fixes: #4627
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
Instead of passing a `KATA_CONF_FILE` environament variable, let's rely
on the configured (in the container engine) config path, as both
containerd and CRI-O support it, and we're using this for both of them.
Fixes: #4608
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
As we're already doing for containerd, let's also pass the configuration
path to CRI-O, as all the supported CRI-O versions do support this
configuration option.
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
This is not an issue when the build is run as non-privilged user.
Marking these as safe in case where the build may be run as root
or some other user.
Signed-off-by: Archana Shinde <archana.m.shinde@intel.com>
While running make as non-privileged user, the make errors out with
the following message:
"INFO: Build cloud-hypervisor enabling the following features: tdx
Got permission denied while trying to connect to the Docker daemon
socket at unix:///var/run/docker.sock: Post
"http://%2Fvar%2Frun%2Fdocker.sock/v1.24/images/create?fromImage=cloudhypervisor%2Fdev&tag=20220524-0":
dial unix /var/run/docker.sock: connect: permission denied"
Even though the user may be part of docker group, the clh build from
source does a docker in docker build. It is necessary for the user of
the nested container to be part of docker build for the build to
succeed.
Fixes#4594
Signed-off-by: Archana Shinde <archana.m.shinde@intel.com>
Replaces calls of nproc with nproc with
nproc ${CI:+--ignore 1}
to run nproc with one less processing unit than the maximum to prevent
DOS-ing the local machine.
If process is being run in a container (determined via whether $CI is
null), all processing units avaliable will be used.
Fixes#3967
Signed-off-by: Derek Lee <derlee@redhat.com>
As 2.5.0-rc0 has been released, let's switch the kata-deploy / kata-cleanup
tags back to "latest", and re-add the kata-deploy-stable and the
kata-cleanup-stable files.
Signed-off-by: Fabiano Fidêncio <fabiano@fidencio.org>
kata-deploy files must be adapted to a new release. The cases where it
happens are when the release goes from -> to:
* main -> stable:
* kata-deploy-stable / kata-cleanup-stable: are removed
* stable -> stable:
* kata-deploy / kata-cleanup: bump the release to the new one.
There are no changes when doing an alpha release, as the files on the
"main" branch always point to the "latest" and "stable" tags.
Signed-off-by: Fabiano Fidêncio <fabiano@fidencio.org>
While doing a docker build for shim-v2, we see this:
```
fatal: unsafe repository
('/home/${user}/go/src/github.com/kata-containers/kata-containers' is
owned by someone else)
To add an exception for this directory, call:
git config --global --add safe.directory
/home/${user}/go/src/github.com/kata-containers/kata-containers
```
This is because the docker container build is run as root while the
runtime repo is checked out as normal user.
Unlike this error causing the rootfs build to error out, the error here
does not really cause `make shim-v2-tarball` to fail.
However its good to get rid of this error message showing during the
make process.
Fixes: #4572
Signed-off-by: Archana Shinde <archana.m.shinde@intel.com>
This PR removes an unused kata configure docker script which was used
in packaging for kata 1.x but not longer being used in kata 2.x
Fixes#4546
Signed-off-by: Gabriela Cervantes <gabriela.cervantes.tellez@intel.com>
The apply_patches.sh script applies all patches in the patches
directory, as well as subdirectories. This means if there is a sub-dir
called "experimental" under a major kernel version directory,
experimental patches would be applied to the default kernel supported by
Kata.
We did not come accross this issue earlier as typically the experimental
kernel version was different from the default kernel.
With both the default kernel and the arm-experimental kernel having the
same major kernel version (5.15.x) at this time, trying to update the
kernel patch version revealed that arm-experimental patches were being
applied to the default kernel.
Restricting the patches to be applied to the top level directory will
solve the issue. The apply_patches script should ignore any
sub-directories meant for experimental patches.
Fixes#4520
Signed-off-by: Archana Shinde <archana.m.shinde@intel.com>
Otherwise `./build-kernel.sh -x tdx setup` will fail with the following
error:
```
$ ./build-kernel.sh -x tdx setup
INFO: Config version: 92
INFO: Kernel version: tdx-guest-v5.15-4
INFO: kernel path does not exist, will download kernel
INFO: Apply patches from
/home/ffidenci/go/src/github.com/kata-containers/kata-containers/tools/packaging/kernel/patches/tdx-guest-v5.15-4.x
INFO: Found 0 patches
INFO: Enabling config for 'tdx' confidential guest protection
INFO: Constructing config from fragments:
/home/ffidenci/go/src/github.com/kata-containers/kata-containers/tools/packaging/kernel/configs/fragments/x86_64/.config
WARNING: unmet direct dependencies detected for UNACCEPTED_MEMORY
Depends on [n]: EFI [=n] && EFI_STUB [=n]
Selected by [y]:
- INTEL_TDX_GUEST [=y] && HYPERVISOR_GUEST [=y] && X86_64 [=y] &&
CPU_SUP_INTEL [=y] && PARAVIRT [=y] && SECURITY [=y] &&
X86_X2APIC[=y]
INFO: Some CONFIG elements failed to make the final .config:
INFO: Value requested for CONFIG_EFI_STUB not in final .config
INFO: Generated config file can be found in
/home/ffidenci/go/src/github.com/kata-containers/kata-containers/tools/packaging/kernel/configs/fragments/x86_64/.config
ERROR: Failed to construct requested .config file
ERROR: failed to find default config
```
Fixes: #4510
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
This PR removes unused the publish kata image script which
was used on kata 1.x when we had OBS packages which are not
longer used on kata 2.x
Fixes#4496
Signed-off-by: Gabriela Cervantes <gabriela.cervantes.tellez@intel.com>
So far this has been done for x86_64. Now that the support for building
and testing has been added for all arches, let's do the second part of
the switch.
We're still not done yet for powerpc, as some a virtifosd crash on the
rust version has been found by the maintainer.
Fixes: #4258, #4260
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
Add kernel fork for sev to kernel builder with efi_secret. Additionally, install efi_secret module for sev.
Fixes: #4179
Signed-off-by: Alex Carter <alex.carter@ibm.com>
Since we are introducing an agent API for interacting with guest
iptables, let's ensure that our example rootfs' have iptables-save/restore
installed.
Fixes: #4356
Signed-off-by: Eric Ernst <eric_ernst@apple.com>
Destructive mode is required to build the Kata Containers snap. See:
```
.github/workflows/snap-release.yaml
.github/workflows/snap.yaml
```
Hence, update the last file that we forgot to update with
`--destructive-mode`.
Signed-off-by: James O. D. Hunt <james.o.hunt@intel.com>
Move the snap README to a subdirectory to resolve the warning given by
`snapcraft` (folded and reformatted slightly for clarity):
```
The 'snap' directory is meant specifically for snapcraft,
but it contains the following non-snapcraft-related paths,
which is unsupported and will cause unexpected behavior:
- README.md
If you must store these files within the 'snap' directory,
move them to 'snap/local', which is ignored by snapcraft.
```
Signed-off-by: James O. D. Hunt <james.o.hunt@intel.com>
Based on @fidencio's opoinon,
On Arm: static build virtiofsd using musl lib;
on ppc64 & s390: static build virtiofsd using gnu lib;
Fixes: #4258
Signed-off-by: Jianyong Wu <jianyong.wu@arm.com>
This PR removes the clear containers reference as this is not longer
being used and is deprecated at the rootfs builder README.
Fixes#4278
Signed-off-by: Gabriela Cervantes <gabriela.cervantes.tellez@intel.com>
This PR removes the nemu.conf as we are not longer using NEMU from
the kernel configurations.
Fixes#4272
Signed-off-by: Gabriela Cervantes <gabriela.cervantes.tellez@intel.com>
For the Gramine Shielded Containers guest kernel, CONFIG_NUMA must be
enabled.
Fixes #4266
Signed-off-by: Chelsea Mafrica <chelsea.e.mafrica@intel.com>
As we finally can move to using the rust virtiofs daemon, let's stop
bulding and packaging the C version of the virtiofsd for x86_64.
Fixes: #4249
Depends-on: github.com/kata-containers/tests#4785
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
There are a few patches for SGX numa support in QEMU added after the
6.2.0 release. Add them for SGX support in Kata.
Fixes#4254
Signed-off-by: Chelsea Mafrica <chelsea.e.mafrica@intel.com>
As done for the other binaries we release, let's add support for
"building" (or pulling down) the static binary we ship as part of the
kata-containers static tarball (the same one used by kata-deploy).
Right now the virtiofsd is installed in /opt/kata/libexec/virtiofsd, a
different path than the virtiofsd that comes with QEMU.
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
As virtiofsd comes in the `zip` format, let's install unzip in the
containers and then be able to access the virtiofsd binary.
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
Right now this is very much x86_64 specific, but I'd like to count on
the maintainers of the other architectures to expand it.
Also, the name as it's now may be misleading, as we're actually only
pulling the binary that's statically built using `musl` and released as
part of virtiofsd official releases. But we'll need to build it for the
other architectures, thus I'm following the naming of the scripts used
by the other components.
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
In at least kata versions 2.3.3 and 2.4.0 it was noticed that the guest
operating system's clock would drift out of sync slowly over time
whilst the pod was running.
This had previously been raised and fixed in the old reposity via [1].
In essence kvm_ptp and chrony were paired together in order to
keep the system clock up to date with the host.
In the recent versions of kata metioned above,
the chronyd.service fails upon boot with status `266/NAMESPACE`
which seems to be due to the fact that the `/var/lib/chrony`
directory no longer exists.
This change sets the `/var/lib/chrony` directory for the `ReadWritePaths`
to be ignored when the directory does not exist, as per [2].
[1] https://github.com/kata-containers/runtime/issues/1279
[2] https://www.freedesktop.org/software/systemd
/man/systemd.exec.html#ReadWritePaths=
Fixes: #4167
Signed-off-by: Champ-Goblem <cameron_mcdermott@yahoo.co.uk>
"RKE2 - Rancher's Next Generation Kuberentes Distribution" can easily be
supported by kata-deploy with some simple adjustments to what we've been
relying on for "k3s".
The main differences between k3s and RKE2 are, basically:
1. The location where the containerd configuration is stored
- k3s: /var/lib/rancher/k3s/agent/etc/containerd/
- rke2: /var/lib/rancher/rke2/agent/etc/containerd/
2. The name of the systemd services used:
- k3s: k3s.service or k3s-agent.service
- rke2: rke2-server.service or rke2-agent.service
Knowing this, let's add a new overlay for RKE2, adapt the kata-deploy
and the kata-cleanup scripts, and that's it.
Fixes: #4160
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
Let's move the specific installation instructions, such as for k3s,
upper in the document.
This helps reading (and also skipping) according to what the user
is looking for.
Signed-off-by: Fabiano Fidêncio <fabiano@fidencio.org>
If we fail to download the clh binary, we fall-back to build from source.
Unfortunately, `pull_clh_released_binary()` leaves a `cloud_hypervisor`
directory behind, which causes `build_clh_from_source()` not to clone
the git repo:
[ -d "${repo_dir}" ] || git clone "${cloud_hypervisor_repo}"
When building from a kata-containers git repo, the subsequent calls
to `git` in this function thus apply to the kata-containers repo and
eventually fail, e.g.:
+ git checkout v23.0
error: pathspec 'v23.0' did not match any file(s) known to git
It doesn't quite make sense actually to keep an existing directory the
content of which is arbitrary when we want to it to contain a specific
version of clh. Just remove it instead.
Fixes: #4151
Signed-off-by: Greg Kurz <groug@kaod.org>
The idea is to pass this README file to kata-doc-to-script.sh script and
then execute the result.
Added comments with a file name on top of each YAML snippet.
This helps in assigning a file name when we cat the YAML to a file.
Fixes: #3943
Signed-off-by: David Esparza <david.esparza.borquez@intel.com>
`make kata-tarball` relies on `kata-deploy-binaries.sh -s` which
silently ignores errors, and you may end up with an incomplete
tarball without noticing it because `make`'s exit status is 0.
`kata-deploy-binaries.sh` does set the `errexit` option and all the
code in the script seems to assume that since it doesn't do error
checking. Unfortunately, bash automatically disables `errexit` when
calling a function from a conditional pipeline, like done in the `-s`
case:
if [ "${silent}" == true ]; then
if ! handle_build "${t}" &>"$log_file"; then
^^^^^^
this disables `errexit`
and `handle_build` ends with a `tar tvf` that always succeeds.
Adding error checking all over the place isn't really an option
as it would seriously obfuscate the code. Drop the conditional
pipeline instead and print the final error message from a `trap`
handler on the special ERR signal. This requires the `errtrace`
option as `trap`s aren't propagated to functions by default.
Since all outputs of `handle_build` are redirected to the build
log file, some file descriptor duplication magic is needed for
the handler to be able to write to the orignal stdout and stderr.
Fixes#3757
Signed-off-by: Greg Kurz <groug@kaod.org>
This script is responsible for generating a tarball with all the rust
vendored code that is needed for fully building kata-containers on a
disconnected environment.
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
'make kata-tarball' sometimes fails early with:
cp: cannot create regular file '[...]/tools/packaging/kata-deploy/local-build/dockerbuild/install_yq.sh': File exists
This happens because all assets are built in parallel using the same
`kata-deploy-binaries-in-docker.sh` script, and thus all try to copy
the `install_yq.sh` script to the same location with the `cp` command.
This is a well known race condition that cannot be avoided without
serialization of `cp` invocations.
Move the copying of `install_yq.sh` to a separate script and ensure
it is called *before* parallel builds. Make the presence of the copy
a prerequisite for each sub-build so that they still can be triggered
individually. Update the GH release workflow to also call this script
before calling `kata-deploy-binaries-in-docker.sh`.
Fixes#3756
Signed-off-by: Greg Kurz <groug@kaod.org>
NO_TTY configured whether to add the -t option to docker run. It makes no
sense for the caller to configure this, since whether you need it depends
on the commands you're running. Since the point here is to run
non-interactive build scripts, we don't need -t, or -i either.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Greg Kurz <groug@kaod.org>
This directory consists entirely of files built during a make kata-tarball,
so it should not be committed to the tree. A symbolic link to this directory
might be created during 'make tarball', ignore it as well.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
[greg: - rearranged the subject to make the subsystem checker happy
- also ignore the symbolic link created by
`kata-deploy-binaries-in-docker.sh`]
Signed-off-by: Greg Kurz <groug@kaod.org>
Right now it doesn't do much for us, as we're always building from a
specific version. However, this opens the possibility for us to add a
CI, similar to the one we have for CRI-O, for testing against each
cloud-hypervisor PR, on the cloud-hypervisor branch.
Fixes: #3908
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
bring Intel SGX support
Changes tha may impact in Kata Containers
Arm:
The 'virt' machine now supports an emulated ITS
The 'virt' machine now supports more than 123 CPUs in TCG emulation mode
The pl031 real-time clock device now supports sending RTC_CHANGE QMP events
PowerPC:
Improved POWER10 support for the 'powernv' machine
Initial support for POWER10 DD2.0 CPU added
Added support for FORM2 PAPR NUMA descriptions in the "pseries" machine
type
s390x:
Improved storage key emulation (e.g. fixed address handling, lazy
storage key enablement for TCG, ...)
New gen16 CPU features are now enabled automatically in the latest
machine type
KVM:
Support for SGX in the virtual machine, using the /dev/sgx_vepc device
on the host and the "memory-backend-epc" backend in QEMU.
New "hv-apicv" CPU property (aliased to "hv-avic") sets the
HV_DEPRECATING_AEOI_RECOMMENDED bit in CPUID[0x40000004].EAX.
virtio-mem:
QEMU now fully supports guest memory dumps with virtio-mem.
QEMU now cleanly supports precopy migration, postcopy migration and
background snapshots with virtio-mem.
fixes#3902
Signed-off-by: Julio Montes <julio.montes@intel.com>
As 2.4.0-rc0 has been released, let's switch the kata-deploy / kata-cleanup
tags back to "latest", and re-add the kata-deploy-stable and the
kata-cleanup-stable files.
Signed-off-by: Eric Ernst <eric_ernst@apple.com>
kata-deploy files must be adapted to a new release. The cases where it
happens are when the release goes from -> to:
* main -> stable:
* kata-deploy-stable / kata-cleanup-stable: are removed
* stable -> stable:
* kata-deploy / kata-cleanup: bump the release to the new one.
There are no changes when doing an alpha release, as the files on the
"main" branch always point to the "latest" and "stable" tags.
Signed-off-by: Eric Ernst <eric_ernst@apple.com>
During the release of 2.4.0-rc0 @egernst noticed an incositency in the
way we handle release tags, as release candidates are being taken as
"stable" releases, while both the kata-deploy tests and the release
action consider this as "latest".
Ideally we should have our own tag for "release candidate", but that's
something that could and should be discussed more extensively outside of
the scope of this quick fix.
For now, let's align the code generating the PR for bumping the release
with what we already do as part of the release action and kata-deploy
test, and tag "-rc" as latest, regardless of which branch it's coming
from.
Fixes: #3847
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
Use `multistrap` for building Ubuntu rootfs. Adds support for building
for foreign architectures using the `ARCH` environment variable.
In the process, the Ubuntu rootfs workflow is vastly simplified.
Signed-off-by: Jakob Naucke <jakob.naucke@ibm.com>
- Add a doc comment
- Pass to build container, e.g. to build x86_64 with glibc (would
always use musl)
Signed-off-by: Jakob Naucke <jakob.naucke@ibm.com>
Remove a lot of cruft of musl installations -- we needed those for the
Go agent, but Rustup just takes care of everything. aarch64 on
Debian-based & Alpine is an exception -- create a symlink
`aarch64-linux-musl-gcc` to `musl-tools`'s `musl-gcc` or `gcc` on
Alpine. This is unified -- arch-specific Dockerfiles are removed.
Signed-off-by: Jakob Naucke <jakob.naucke@ibm.com>
Hadolint DL3019. If you're wondering why this is in this PR, that's
because I touch the file later, and we're only triggering the lints for
changed files.
Signed-off-by: Jakob Naucke <jakob.naucke@ibm.com>
Add a new entry of arm-kernel-experimental and let the kernel build
script support to build it.
Fixes: #3280
Signed-off-by: Jianyong Wu <jianyong.wu@arm.com>
I'm sure that it is correct to remove CONFIG_ARM64_UAO and
CONFIG_MANDATORY_FILE_LOCKING and . Both are gone in 5.15. Maintain a
specific config files for a kernel version is a little ugly. If someone
needs them, shout at me.
Fixes: #3280
Signed-off-by: Jianyong Wu <jianyong.wu@arm.com>
As the support for vcpu hotplug is on the road, I pick them up here as
experimental to let user try cpu hotplug and virtio-mem on arm64.
Fixes: #3280
Signed-off-by: Jianyong Wu <jianyong.wu@arm.com>
With the ACPI PCI hotplug changes introduced in 2.3, QEMU >= 6.1 is required.
Remove unnecessary qemu version check in build script.
Fixes#3547
Signed-off-by: goodluckbot <tangbo_gl@hotmail.com>
4c164afbac renamed extra_build_args to
features, but did it only in one place, leading to:
```
21:15:28 /home/jenkins/workspace/kata-containers-2.0-ubuntu-ARM-PR/go/src/github.com/kata-containers/kata-containers/tools/packaging/static-build/cloud-hypervisor/build-static-clh.sh: line 55: features: unbound variable
21:15:29 make[1]: *** [tools/packaging/kata-deploy/local-build/Makefile:30: cloud-hypervisor-tarball-build] Error 1
```
Fixes: #3775
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
Let's bump the Cloud Hypervisor version to 5343e09e7b8db, as that brings
a few fixes we're interested in, such as:
* hypervisor, vmm: Handle TDX hypercalls with INVALID_OPERAND
- https://github.com/cloud-hypervisor/cloud-hypervisor/pull/3723
- This is needed for the TDX support on the cloud hypervisor driver,
which is part of this very same series.
* openapi: Update the PciBdf types
- https://github.com/cloud-hypervisor/cloud-hypervisor/pull/3748
- This is needed due to a change in a DeviceNode field, which would
cause a marshalling / demarshalling error when running with a
version of cloud-hypervisor that includes the TDX fixes mentioned
above.
* scripts: dev_cli: Don't quote $features_build
* scripts: dev_cli: Add --features option
- https://github.com/cloud-hypervisor/cloud-hypervisor/pull/3773
- This is needed due to changes in the scripts used to build Cloud
Hypervisor, which are used as part of Kata Containers CIs and
github actions.
Due to this change, we're also adapting the build scripts as part
of this very same commit.
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
The kata-deploy Dockerfile is based on CentOS 7, which has no s390x
support. Add an `IMAGE` argument to specify the registry, which still
defaults to CentOS, but e.g. ClefOS can be selected instead.
Other x86_64 assumptions are also removed. Other general simplicifations
are made.
This does not address the more general issue of #3723 -- what we're
doing here does not seem to be working with systemd >= something between
235-237.
Fixes: #3722
Signed-off-by: Jakob Naucke <jakob.naucke@ibm.com>
When using kata-deploy, no `containerd-shim-kata-v2` binary is deployed,
but we do deploy a `kata` runtime class, which seems very much
incosistent.
As the default configuration for kata-containers points to QEMU, let's
also use kata with QEMU as the default shim-v2 binary.
Fixes: #3228, #3734
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
The name of SYS_SUPPORTS_HUGETLBFS has been changed to
ARCH_SUPPORTS_HUGETLBFS which is being selected on default
by another kernel config.
More info- 855f9a8e87
Change applicable from v5.13.
Fixes: #3720
Signed-off-by: Amulyam24 <amulmek1@in.ibm.com>
`tools/packaging/scripts/apply_patches.sh` uses `git apply $patch`, but
this will not apply to subdirectories. If one wanted to apply with
`git apply`, they'd have to run it with `--directory=...`
_relative to the Git tree's root_ (absolute will not work!). I suggest
we just use `patch`, which will do what we expected `git apply` would
do.
`patch` is also added to build containers that require it.
Fixes: #3690
Signed-off-by: Jakob Naucke <jakob.naucke@ibm.com>
Let's take advantage of the fact that we've bumped to our kernel version
ot the 5.15 LTS and enable SGX by default, as it's present there.
Fixes: #3692
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
Right now we're getting the info for the Cloud Hypervisor repo and
version, but we don't do anything with them, as those are not passed
down to the build script.
Morever, the build script itself gets the info from exactly the same
place when those are not passed, making those redundant.
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
Right now TDx support on Cloud Hypervisor is gated behind a "--features
tdx" flag. However, having TDx support enabled should not and does not
impact on the general usability of cloud-hypervisor.
As sooner than later we'll need kata-deploy binaries to be tested on a
CI that's TDx capable, for the confidential containers effort, let's
take the bullet and already enable it by default.
By the way, touching kata-deploy-binaries.sh as it's ensure the change
will be used in the following workflows:
* kata-deploy-push
* kata-deploy-test
* release
Fixes: #3688
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
We're downloading the released cloud-hypervisor binary from GitHub, but
we should also ensure we set the binary as executable.
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
Let's allow passing down a build flag to cargo, when building Cloud
Hypervisor.
By doing this we allow calling this script with:
```
extra_build_flags="--features tdx" ./build-static-clh.sh
```
Fixes: #3671
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
The current code will always pull the release binaries in case the
version requested by Kata Containers matches with a released version.
This, however, has a limitation of preventing users / CIs to build
cloud-hypervisor from source for a reason or another, such as passing a
specific build flag to cloud-hypervisor.
This is a pre-req to solving
https://github.com/kata-containers/kata-containers/issues/3671.
While here, a small changes were needed in order to improve readability
and debugability of why we're building something from the sources rather
than simply downloading and using a pre-built binary.
Fixes: #3672
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
to cover a Red Hat (adjacent) rootfs with great cross-platform compatibility
and a workable release cadence. The previous CentOS & Fedora workflows are
simplified.
Also remove unnecessary `/usr/share` files as on Ubuntu and mark Alpine
as unuspported on ppc64le (due to musl, for a while already).
Fixes: #3340
Signed-off-by: Jakob Naucke <jakob.naucke@ibm.com>
We install Rust in the build containers, but we also install Rust in
`rootfs.sh` if it is missing. It makes sense to install Rust in the build
containers so it does not have to be installed every time, but for that check
to work on non-login shells, we should source `.cargo/env` before running it.
Signed-off-by: Jakob Naucke <jakob.naucke@ibm.com>
Add support for building TDX kernel from github.com/intel/tdx
To build a guest kernel that supports Intel TDx run:
```
./build-kernel.sh -s -x tdx -d setup
./build-kernel.sh -s -x tdx -d install
```
fixes#3650
Signed-off-by: Julio Montes <julio.montes@intel.com>
Pulling image is the most time-consuming step in the container lifecycle. This PR
introduse nydus to kata container, it can lazily pull image when container start. So it
can speed up kata container create and start.
Fixes#2724
Signed-off-by: luodaowen.backend <luodaowen.backend@bytedance.com>
Relative links within this repository allow for easier navigation to
the corresponding file / directory in the current commit / for the
selected version.
Link text was slightly changed / fixed in
- docs/Unit-Test-Advice.md
- docs/how-to/how-to-run-docker-with-kata.md
Fixes#3045
Signed-off-by: Daniel Höxtermann <daniel@hxtm.dev>
When building a non-stable release, the tag is **always** "latest¨,
instead of the version. The same magic done for setting the correct
tags up should be done for replacing the tag on the kata-deploy and
kata-cleanup yaml files, as part of the kata-deploy test.
Fixes: #3559
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
Now that kata-pkgsync has been removed, this PR removes the reference
in the documentation.
Fixes#3513
Signed-off-by: Gabriela Cervantes <gabriela.cervantes.tellez@intel.com>
Remove the libseccomp package from Dockerfile of `alpine` and `clearlinux`
because the libseccomp library is installed by the `ci/install_libseccomp.sh`
script when building the kata-agent.
Fixes: #3508
Signed-off-by: Manabu Sugimoto <Manabu.Sugimoto@sony.com>
This PR removes the kata-pkgsync tool that is mainly used for OBS
packages, currently for kata 2.0 we do not have OBS packages and
this tool is not being used for kata 2.0
Fixes#3493
Signed-off-by: Gabriela Cervantes <gabriela.cervantes.tellez@intel.com>
Escape (with backslash) backticks (`) to prevent them from being
evaluated by the shell.
Fixes: #3487
Signed-off-by: Manabu Sugimoto <Manabu.Sugimoto@sony.com>
The script `tools/packaging/static-build/qemu/build-base-qemu.sh`
previously failed on systems where the user's groupname differs from the
username
Fixes: #3461
Signed-off-by: Sebastian Hasler <sebastian.hasler@stuvus.uni-stuttgart.de>
Provide the `/proc/config.gz` file in guest kernels that allow the guest
to determine the kernel configuration used to build the running kernel.
Note that since `gunzip` expects to rename the gzip'ed file it operates
on, to use this feature you need to run something like the following in
the container environment:
```bash
# cat /proc/config.gz|gunzip -c
```
Fixes: #3445.
Signed-off-by: James O. D. Hunt <james.o.hunt@intel.com>
Debian is a supported rootfs that uses systemd as init, thus, it should
be mentioned in the QAT README document.
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
As the gentoo rootfs is not tested in our CI, we can't guarantee it
actually works as expected.
Whenever we have someone willing to maintain this rootfs we can have it
added back, and also add a CI job to test it altogether, avoiding then
any possible regression.
Fixes: #2144
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
As the suse rootfs is not tested in our CI, we can't guarantee it
actually works as expected.
Whenver we have someone willing to maintain this rootfs we can have it
added back, and also add a CI job to test it altogether, avoiding then
any possible regression.
Fixes: #2145
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
As the fedora rootfs is not tested in our CI, we can't guarantee it
actually works as expected.
Whenever we have someone willing to maintain the rootfs we can have it
added back, and also add a CI job to test it altogether, avoiding then
any possible regression.
Fixes: #2143
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
As the centos rootfs is not tested in our CI, we can't guarantee it
actually works as expected.
Whenever we have someone willing to maintain the rootfs we can have it
added back, and also add a CI job to test it altogether, avoiding then
any possible regression.
Fixes: #2140
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
This PR removes the ccloudvm reference at the README document as the
setup of scripts of ccloudvm were removed.
Fixes#3448
Signed-off-by: Gabriela Cervantes <gabriela.cervantes.tellez@intel.com>
This PR removes ccloudvm for kata 2.0, ccloudvm was used in kata 1.x
and we are not longer using it for kata 2.0.
Fixes#3427
Signed-off-by: Gabriela Cervantes <gabriela.cervantes.tellez@intel.com>
This PR removes the scripts and the dockerfiles that were used in kata 1.x
to test the different kata components for different distributions in OBS.
Currently for kata 2.0 we are not generating packages in OBS so these scripts
are not longer being used.
Fixes#3404
Signed-off-by: Gabriela Cervantes <gabriela.cervantes.tellez@intel.com>
Restore Debian as a rootfs.
1. revert of #3154, but some change
2. update debian version to 10.11
3. update `libstdc++-6-dev` to `libstdc++-8-dev`
4. changes discarded in QAT are not restored
Fixes: #3372
Signed-off-by: zhaojizhuang <571130360@qq.com>
The kata-monitor's Dockerfile was added by Eric Ernst on commit 2f1cb7995f
but for some reason the static checker did not catch the file misses the copyright statement
at the time it was added. But it is now complaining about it. So this assign the copyright to
him to make the static-checker happy.
Fixes#3329
Signed-off-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Removed all errors/warnings pointed out by hadolint version 2.7.0, except for the following
ignored rules:
- "DL3008 warning: Pin versions in apt get install"
- "DL3041 warning: Specify version with `dnf install -y <package>-<version>`"
- "DL3033 warning: Specify version with `yum install -y <package>-<version>`"
- "DL3048 style: Invalid label key"
- "DL3003 warning: Use WORKDIR to switch to a directory"
- "DL3018 warning: Pin versions in apk add. Instead of apk add <package> use apk add <package>=<version>"
- "DL3037 warning: Specify version with zypper install -y <package>[=]<version>"
Fixes#3107
Signed-off-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Removed all errors/warnings pointed out by hadolint version 2.7.0, except for the following
ignored rules:
- "DL3008 warning: Pin versions in apt get install"
- "DL3041 warning: Specify version with `dnf install -y <package>-<version>`"
- "DL3033 warning: Specify version with `yum install -y <package>-<version>`"
- "DL3048 style: Invalid label key"
- "DL3003 warning: Use WORKDIR to switch to a directory"
- "DL3018 warning: Pin versions in apk add. Instead of apk add <package> use apk add <package>=<version>"
- "DL3037 warning: Specify version with zypper install -y <package>[=]<version>"
Fixes#3107
Signed-off-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Removed all errors/warnings pointed out by hadolint version 2.7.0, except for the following
ignored rules:
- "DL3008 warning: Pin versions in apt get install"
- "DL3041 warning: Specify version with `dnf install -y <package>-<version>`"
- "DL3033 warning: Specify version with `yum install -y <package>-<version>`"
- "DL3048 style: Invalid label key"
- "DL3003 warning: Use WORKDIR to switch to a directory"
- "DL3018 warning: Pin versions in apk add. Instead of apk add <package> use apk add <package>=<version>"
- "DL3037 warning: Specify version with zypper install -y <package>[=]<version>"
Fixes#3107
Signed-off-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Removed all errors/warnings pointed out by hadolint version 2.7.0, except for the following
ignored rules:
- "DL3008 warning: Pin versions in apt get install"
- "DL3041 warning: Specify version with `dnf install -y <package>-<version>`"
- "DL3033 warning: Specify version with `yum install -y <package>-<version>`"
- "DL3048 style: Invalid label key"
- "DL3003 warning: Use WORKDIR to switch to a directory"
- "DL3018 warning: Pin versions in apk add. Instead of apk add <package> use apk add <package>=<version>"
- "DL3037 warning: Specify version with zypper install -y <package>[=]<version>"
Fixes#3107
Signed-off-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Removed all errors/warnings pointed out by hadolint version 2.7.0, except for the following
ignored rules:
- "DL3008 warning: Pin versions in apt get install"
- "DL3041 warning: Specify version with `dnf install -y <package>-<version>`"
- "DL3033 warning: Specify version with `yum install -y <package>-<version>`"
- "DL3048 style: Invalid label key"
- "DL3003 warning: Use WORKDIR to switch to a directory"
- "DL3018 warning: Pin versions in apk add. Instead of apk add <package> use apk add <package>=<version>"
- "DL3037 warning: Specify version with zypper install -y <package>[=]<version>"
Fixes#3107
Signed-off-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
It seems the lack of protoc in the alpine containers is causing issues
with some of our CIs, such as the VFIO one.
Fixes: #3323
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
Currently QEMU's submodules are git cloned but there is the scripts/git-submodule.sh
which is meant for that. Let's use that script.
Signed-off-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
The static build of QEMU takes a good amount of time on cloning the
source tree because we do a full git clone. In order to speed up that
operation this changed the Dockerfile so that it is carried out a
partial clone by using --depth=1 argument.
Fixes#3291
Signed-off-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Currently the versions.txt in rootfs-builder dir is already removed,
so avoid to copy it in list of helper files.
Fixes: #3267
Signed-off-by: zhanghj <zhanghj.lc@inspur.com>
Commit 112ea25859 disabled libudev for static builds because it was
breaking snap. It turns out that the only users of libudev in QEMU are
qemu-pr-helper and USB. Kata already disables USB and doesn't use
qemu-pr-helper. Disable libudev for all builds if QEMU supports it, i.e.
version 5.2 or newer.
Fixes#3078
Signed-off-by: Greg Kurz <groug@kaod.org>
As containerd can properly run without having a existent
`/etc/containerd/config.toml` file (it'd run using the default
cobnfiguration), let's explicitly create the file in those cases.
This will avoid issues on ammending runtime classes to a non-existent
file.
Fixes: #3229
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
Tested-by: Jakob Naucke <jakob.naucke@ibm.com>
Now if no options/arguments specified, the shell scripts will return an error:
ERROR: Invalid rootfs directory: ''
This commit will show usage if no options/arguments specified.
Fixes: #3256
Signed-off-by: bin <bin@hyper.sh>
Use the same runtime used for podman run also for the podman build cmd
Additionally remove "docker" from the docker_run_args variable
Fixes: #3239
Signed-off-by: Snir Sheriber <ssheribe@redhat.com>
- Upgrade Alpine guest rootfs to 3.15
- Specify a minor version rather than patch level as the Alpine
repositories use that.
Signed-off-by: Jakob Naucke <jakob.naucke@ibm.com>
#2399 partially reverted #418, missing on returning to bootstrapping a
rootfs with `apk.static` instead of copying the entire root, which can
result in drastically larger (more than 10x) images. Revert this as well
(requires some updates to URL building).
Fixes: #3216
Signed-off-by: Jakob Naucke <jakob.naucke@ibm.com>
The help information of '-f' option is missing, and same issue
with 'BLOCK_SIZE' env variables, fix it in usage() function.
Fixes: #3231
Signed-off-by: zhanghj <zhanghj.lc@inspur.com>
Currently we do not have debian as part of the kata CI as we
do not have a mantainer, this PR removes debian as a supported
rootfs in order to have only the distros that we are supporting
and mantainining.
Fixes#3153
Signed-off-by: Gabriela Cervantes <gabriela.cervantes.tellez@intel.com>
So that the debug console is more useful. In the meantime, remove
iptables as it is not used by kata-agent any more.
Fixes: #3138
Signed-off-by: Peng Tao <bergwolf@hyper.sh>
kernel compiled in fedora 35 (latest) is not working, following error
is reported:
```
qemu-system-x86_64: Error loading uncompressed kernel without PVH ELF
Note
```
Build QAT kernel in fedora 34 container to fix it
fixes#3135
Signed-off-by: Julio Montes <julio.montes@intel.com>
All repos we release (https://github.com/kata-containers/kata-containers
and https://github.com/kata-containers/tests) have a VERSION file.
Keeping a check for it, although useful for a new repo, just complicates
the use-case we currently deal with.
While here, let's also anchor the '#' and potentially exclude blank
lines, following James' suggestion.
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
`grep`ing by a specific output, in a specific language, is quite fragile
and could easily break `hub`. For now, let's work this around following
James' suggestion of setting `LC_ALL=C LANG=C` when calling `hub`.
> **Note**: I don't think we should invest much time on fixing `hub`
> usage, as it'll be soon replaced by `gh`, see:
> https://github.com/kata-containers/kata-containers/issues/3083
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
When branching the "stable-x.y" branch, we need to do some quite
specific changes to kata-deploy / kata-cleanup files, such as:
* changing the tags from "latest" to "stable-x.y".
* removing the kata-deploy / kata-cleanup stable files.
However, after the branching is done, we need to get the `main` repo to
its original state, with the kata-deploy / kata-cleanup using the
"latest" tag, and with the stable files present there, and this commit
ensures that, during the release process, a new PR is automatically
created with these changes.
Fixes: #3069
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
Rather than doing the kata-deploy changes as part of the release bump
commit, let's split those on its own changes, as it will both make the
life of the reviewer less confusing and also allows us to start
preparing the field for a possible automated revert of these changes,
whenever it becomes needed.
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
Similarly to what was done for the yaml files, let's use a var for
representing the registry where our images will be pushed to and avoid
repetition and too long lines.
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
Instead of always writing the full path of some files, let's just create
some vars and avoid both repetition (which is quite error prone) and too
long lines (which makes the file not so easy to read).
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
We can simplify the code a little bit, as at least now we group common
operationr together. Hopefully this will improve the maintainability
and the readability of the code.
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
The comments were mentioning kata-deploy-base files while it really
should mention kata-deploy-stable files.
While here, I've also added a missing '"' to one of the tags.
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
Although the binary name of the shipped binary is `qemu-system-x86_64`,
and we only ship kata-deploy for `x86_64`, we better leaving the
architecture specific name out of our README file.
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
While building snap, static qemu is considered. Disable libudev
as it doesn't have static libraries on most of the distros of all
archs.
Fixes: #3002
Signed-off-by: Amulyam24 <amulmek1@in.ibm.com>
stable-2.3 was the first time we branched the repo since
43a72d76e2 was merged. One bit that I
didn't notice while working on this, regardless of being warned by
@amshinde (sorry!), was that the change would happen on `main` branch,
rather than on the branched `stable-2.3` one.
In my mind, the workflow was:
* we branch.
* we do the changes, including removing the files.
* we tag a release.
However, the workflow actually is:
* we do the changes, including removing the files.
* we branch.
* we tag a release.
A better way to deal with this has to be figured out before 2.4.0 is
out, but for now let's just re-add the files back.
Fixes: #3067
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
Update the `agent-ctl` tool to allow API fields to be specified in JSON
format, either directly on the command-line, or via a file URI.
This feature is made possible by enabling `serde` support in the agent
`protocols` crate. Careful use of the `serde` macros allows the
`agent-ctl` tool to accept _partially_ specified API objects in JSON
format; fields that are not specified are set to the default value for
their respective types.
`build.rs` changes based on work by Fupan.
Fixes: #2978.
Contributions-by: Fupan Li <lifupan@gmail.com>
Contributions-by: Bin Liu <bin@hyper.sh>
Signed-off-by: James O. D. Hunt <james.o.hunt@intel.com>
Remove the `StartTracing` and `StopTracing` agent APIs that toggle
dynamic tracing. This is not supported in Kata 2.x, as documented in the
[tracing proposals document](https://github.com/kata-containers/kata-containers/pull/2062).
Fixes: #2985.
Signed-off-by: James O. D. Hunt <james.o.hunt@intel.com>
- runtime# make sure the "Shutdown" trace span have a correct end
- tracing: Accept multiple dynamic tags
- logging: Enable agent debug output for release builds
- agent: "Revert agent: Disable seccomp feature on aarch64 temporarily"
- runtime: Enhancement for Makefile
- osbuilder: build image-builder image from Fedora 34
- agent: refactor process IO processing
- agent-ctl: Update for Hybrid VSOCK
- docs: Fix outdated links
- ci/install_libseccomp: Fix libseccomp build and misc improvement
- virtcontainers: simplify read-only mount handling
- runtime: add fast-test to let test exit on error
- test: Fix random failure for TestIoCopy
- cli: Show available guest protection in env output
- Update k8s, critools, and CRI-O to their 1.22 release
- package: assign proper value to redefined_string in build-kernel.sh
- agent: Make wording of error message match CRI-O test suite
- docs: Moving from EOT to EOF
- virtcontainers: api: update the functions in the api.md docs
- release: Upload libseccomp sources with notice to release page
- virtcontainers: check that both initrd and image are not set
- agent: Fix the configuration sample file
- runtime: set tags for trace span
- agent-ctl: Implement Linux OCI spec handling
- runtime: Remove comments about unsupported features in config for clh
- tools/packaging: Add options for VFIO to guest kernel
- agent/runtime: Add seccomp feature
- ci: test-kata-deploy: Get rid of slash-command-action action
- This is to bump the OOT QAT 1.7 driver version to the latest version.…
- forwarder: Drop privileges when using hybrid VSOCK
- packaging/static-build: s390x fixes
- agent-ctl: improve the oci_to_grpc code
- agent: do not return error but print it if task wait failed
- virtcontainers: delete duplicated notify in watchHypervisor function
- agent: Handle uevent remove actions
- enable unit test on arm
- rustjail: Consistent coding style of LinuxDevice type
- cli: Fix outdated kata-runtime bash completion
- Allow VFIO devices to be used as VFIO devices in the container
- Expose top level hypervisor methods -
- Upgrade to Cloud Hypervisor v19.0
- docs: use-cases: Update Intel SGX use case
- virtcontainers: clh: Enable the `seccomp` feature
- runtime: delete cri containerd plugin from versions.yaml
- docs: Write tracing documentation
- runtime: delete useless src/runtime/cli/exit.go
- snap: add cloud-hypervisor and experimental kernel
- osbuilder: Call detect_rust_version() right before install_rust.sh
- docs: Updating Developer Guide re qemu-img
- versions: Add libseccomp and gperf version
- Enable agent tracing for hybrid VSOCK hypervisors
- runtime: optimize test code
- runtime: use containerd package instead of cri-containerd
- runtime: update sandbox root dir cleanup behavior in rootless hypervisor
- utils: kata-manager: Update kata-manager.sh for new containerd config
- osbuilder: Re-enable building the agent in Docker
- agent: Do not fail when trying to adding existing routes
- tracing: Fix typo in "package" tag name
- kata-deploy: add .dockerignore file
- runtime: change name in config settings back to "kata"
- tracing: Remove trace mode and trace type
09d5d88 runtime: tracing: Change method for adding tags
bcf3e82 logging: Enable agent debug output for release builds
a239a38 osbuilder: build image-builder image from Fedora 34
375ad2b runtime: Enhancement for Makefile
b468dc5 agent: Use dup3 system call in unit tests of seccomp
1aaa059 agent: "Revert agent: Disable seccomp feature on aarch64 temporarily"
1e331f7 agent: refactor process IO processing
9d3ec58 runtime: make sure the "Shutdown" trace span have a correct end
3f21af9 runtime: add fast-test to let test exit on error
9b270d7 ci/install_libseccomp: use a temporary work directory
98b4406 ci/install_libseccomp: Fix fail when DESTDIR is set
338ac87 virtcontainers: api: update the functions in the api.md docs
23496f9 release: Upload libseccomp sources with notice to release page
e610fc8 runtime: Remove comments about unsupported features in config for clh
7e40195 agent-ctl: Add stub for AddSwap API
82de838 agent-ctl: Update for Hybrid VSOCK
d1bcf10 forwarder: Remove quotes from socket path in doc
e66d047 virtcontainers: simplify read-only mount handling
bdf4824 tools/packaging: Add options for VFIO to guest kernel
c509a20 agent-ctl: Implement Linux OCI spec handling
42add7f agent: Disable seccomp feature on aarch64 temporarily
5dfedc2 docs: Add explanation about seccomp
45e7c2c static-checks: Add step for installing libseccomp
a3647e3 osbuilder: Set up libseccomp library
3be50ad agent: Add support for Seccomp
4280415 agent: Fix the configuration sample file
b0bc71f ci: test-kata-deploy: Get rid of slash-command-action action
309dae6 virtcontainers: check that both initrd and image are not set
a10cfff forwarder: Fix changing log level
6abccb9 forwarder: Drop privileges when using hybrid VSOCK
bf00b8d agent-ctl: improve the oci_to_grpc code
b67fa9e forwarder: Make explicit root check
e377578 forwarder: Fix docs socket path
5f30633 virtcontainers: delete duplicated notify in watchHypervisor function
5f5eca6 agent: do not return error but print it if task wait failed
d2a7b6f packaging/static-build: s390x fixes
6cc8000 cli: Show available guest protection in env output
2063b13 virtcontainers: Add func AvailableGuestProtections
a13e2f7 agent: Handle uevent remove actions
34273da runtime/device: Allow VFIO devices to be presented to guest as VFIO devices
68696e0 runtime: Add parameter to constrainGRPCSpec to control VFIO handling
d9e2e9e runtime: Rename constraintGRPCSpec to improve grammar
57ab408 runtime: Introduce "vfio_mode" config variable and annotation
730b9c4 agent/device: Create device nodes for VFIO devices
175f9b0 rustjail: Allow container devices in subdirectories
9891efc rustjail: Correct sanity checks on device path
d6b62c0 rustjail: Change mknod_dev() and bind_dev() to take relative device path
2680c0b rustjail: Provide useful context on device node creation errors
42b92b2 agent/device: Allow container devname to differ from the host
827a41f agent/device: Refactor update_spec_device_list()
8ceadcc agent/device: Sanity check guest IOMMU groups
ff59db7 agent/device: Add function to get IOMMU group for a PCI device
13b06a3 agent/device: Rebind VFIO devices to VFIO driver inside guest
e22bd78 agent/device: Add helper function for binding a guest device to a driver
b40eedc rustjail: Consistent coding style of LinuxDevice type
57c0f93 agent: fix race condition when test watcher
1a96b8b template: disable template unit test on arm
43b13a4 runtime: DefaultMaxVCPUs should not greater than defaultMaxQemuVCPUs
c59c367 runtime: current vcpu number should be limited
fa92251 runtime: kernel version with '+' as suffix panic in parse
52268d0 hypervisor: Expose the hypervisor itself
a72bed5 hypervisor: update tests based on createSandbox->CreateVM change
f434bcb hypervisor: createSandbox is CreateVM
76f1ce9 hypervisor: startSandbox is StartVM
fd24a69 hypervisor: waitSandbox is waitVM
a6385c8 hypervisor: stopSandbox is StopVM
f989078 hypervisor: resumeSandbox is ResumeVM
73b4f27 hypervisor: saveSandbox is SaveVM
7308610 hypervisor: pauseSandbox is nothing but PauseVM
8f78e1c hypervisor: The SandboxConsole is the VM's console
4d47aee hypervisor: Export generic interface methods
6baf258 hypervisor: Minimal exports of generic hypervisor internal fields
37fa453 osbuilder: Update QAT driver in Dockerfile
8030b6c virtcontainers: clh: Re-generate the client code
8296754 versions: Upgrade to Cloud Hypervisor v19.0
2b13944 docs: Fix outdated links
4f75ccb docs: use-cases: Update Intel SGX use case
4f018b5 runtime: delete useless src/runtime/cli/exit.go
7a80aeb docs: Moving from EOT to EOF
09a5e03 docs: Write tracing documentation
b625f62 runtime: delete cri containerd plugin from versions.yaml
24fff57 snap: make curl commands consistent
2b9f79c snap: add cloud-hypervisor and experimental kernel
273a1a9 runtime: optimize test code
76f16fd runtime: use containerd package instead of cri-containerd
6d55b1b docs: use containerd to replace cri-containerd
ed02bc9 packaging: add containerd to versions.yaml
50da26d osbuilder: Call detect_rust_version() right before install_rust.sh
b4fadc9 docs: Updating Developer Guide re qemu-img
b8e69ce versions: Add libseccomp and gperf version
17a8c5c runtime: Fix random failure for TestIoCopy
f34f67d osbuilder: Specify version when installing Rust
135a080 osbuilder: Pass CI env to container agent build
eb5dd76 osbuilder: Re-enable building the agent in Docker
bcffa26 tracing: Fix typo in "package" tag name
e61f5e2 runtime: Show socket path in kata-env output
5b3a349 trace-forwarder: Support Hybrid VSOCK
e42bc05 kata-deploy: add .dockerignore file
321be0f tracing: Remove trace mode and trace type
7d0b616 agent: Do not fail when trying to adding existing routes
3f95469 runtime: logging: Add variable for syslog tag
adc9e0b runtime: fix two bugs in rootless hypervisor
51cbe14 runtime: Add option "disable_seccomp" to config hypervisor.clh
98b7350 virtcontainers: clh: Enable the `seccomp` feature
46720c6 runtime: set tags for trace span
d789b42 package: assign proper value to redefined_string
4d7ddff utils: kata-manager: Update kata-manager.sh for new containerd config
f5172d1 cli: Fix outdated kata-runtime bash completion
d45c86d versions: Update CRI-O to its 1.22 release
c4a6426 versions: Update k8s & critools to v1.22
881b996 agent: Make wording of error message match CRI-O test suite
Signed-off-by: Peng Tao <bergwolf@hyper.sh>
Ensure the tests in the local `logging` crate are run for all consumers
of it.
Additionally, add a new test which checks that output is generated by a
range of different log level `slog` macros. This is designed to ensure
debug level output is always available for the consumers of the
`logging` crate.
Fixes: #2969.
Signed-off-by: James O. D. Hunt <james.o.hunt@intel.com>
Currently the image-builder image is built from `fedora:latest` and
this is error-prone as any update of the base image can lead to
breakage. Instead let's create the image from Fedora 34, which is the
last known version to build fine.
Fixes#2960
Signed-off-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
The `kata-agent` binaries inside the Kata Containers images provided
with release are statically linked with the GNU LGPL-2.1 licensed
libseccomp library by default.
Therefore, we attach the complete source code of the libseccomp
to the release page in order to comply with the LGPL-2.1 (6(a)).
In addition, we add the description about the libseccomp license
to the release page.
Fixes: #2922
Signed-off-by: Manabu Sugimoto <Manabu.Sugimoto@sony.com>
Allow the `agent-ctl` tool to connect to a Hybrid VSOCK hypervisor such
as Cloud Hypervisor or Firecracker.
Fixes: #2914.
Signed-off-by: James O. D. Hunt <james.o.hunt@intel.com>
Update the trace forwarder README to remove the quotes around the socket
path, which makes manipulating that path easier.
Signed-off-by: James O. D. Hunt <james.o.hunt@intel.com>
Pull #2795 recently added support for a closer-to-OCI behaviour for
VFIO devices, in which they appear to the container as VFIO devices,
rather than being interpreted by the guest kernel. However, in order
to use this, the Kata guest kernel needs to include the VFIO PCI
driver, along with dependencies like the Intel IOMMU driver.
The kernel as built by the scripts within Kata don't currently include
those, so this patch adds them.
fixes#2913
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
- convert linux field from oci spec to grpc spec
- include all the fields below linux oci spec
Fixes: #2715
Signed-off-by: Da Li Liu <liudali@cn.ibm.com>
The osbuilder needs to set up libseccomp library to build the kata-agent
because the kata-agent supports seccomp currently.
The library is built from the sources to create a static library for musl libc.
In addition, environment variables for the libseccomp crate are set to
link the library statically.
Fixes: #1476
Signed-off-by: Manabu Sugimoto <Manabu.Sugimoto@sony.com>
The oci_to_grpc function just handles part of oci fields,
and others are not copied from oci spec to grpc spec,
such as process.env, process.capabilities, mounts and so on.
Try to implement more handlings to convert thoses fields.
Fixes#2686
Signed-off-by: Lei Li <cdlleili@cn.ibm.com>
- Install OpenSSL for key generation in kernel build
- Do not install libpmem
- Do not exclude `*/share/*/*.img` files in QEMU tarball since among
them are boot loader files critical for IPLing.
Fixes: #2895
Signed-off-by: Jakob Naucke <jakob.naucke@ibm.com>
This is to bump the OOT QAT 1.7 driver version to the
latest version. I dida test on my QAT enabled system and
everything functioned as expected.
Fixes: #2877
Signed-off-by: Eric Adams <eric.adams@intel.com>
This commit will add containerd to versions.yaml.
Please at now there are both containerd and cri-containerd
in the versions.yaml.
After updating of kata-containers/tests repo, the cri-containerd
should be removed.
Fixes: #2791
Signed-off-by: bin <bin@hyper.sh>
When building with dracut method the build_rootfs_distro() is not called, in turn
detect_rust_version() isn't either, so the install_rust.sh script is gave a null
rust version. This changed the script to call detect_rust_version() right before
install_rust.sh.
Related to commit: f34f67d610Fixes#2862
Signed-off-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
and update the script in `ci/` accordingly.
When only parts of the Kata Containers repositories are checked out
(e.g. when building with Snap) and no Rust version is provided in
calling `install_rust.sh`, the scripts will attempt to clone the
appropriate repos to read the version, which will fail because the
directories already exist. Since we have read the version already, we
can just specify it.
Signed-off-by: Jakob Naucke <jakob.naucke@ibm.com>
The agent build inside a Docker or Podman container has been re-enabled,
but we have since introduced the `$CI` environment variable. Pass it to
avoid checking out the tests repo to main when there is a dependency.
Signed-off-by: Jakob Naucke <jakob.naucke@ibm.com>
or Podman. This is a partial revert of
76c18aa345. The rationale behind that
commit was the fact that the agent could not be built on Alpine, and
then this capability was removed altogether. The issue in Alpine has
since been resolved (see
https://github.com/kata-containers/osbuilder/issues/386). At the same
time, this ensures being able to run a glibc agent on hosts with distros
more recent than the osbuilder distro used (i.e. as of now, when you
build the agent on the host, and its glibc is newer than the one used in
the guest, the agent may encounter unresolved symbols).
Fixes#2398
Signed-off-by: Jakob Naucke <jakob.naucke@ibm.com>
.dockerignore file is similar to .gitignore and serves the purpose to
simply ignore paths in the build context.
For now, let me just use it to fix the following problem:
```
docker build --build-arg KATA_ARTIFACTS=kata-static.tar.xz .
error checking context: 'no permission to read from
'(...)/local-build/build/firecracker/builddir/firecracker/(...)/crc64-1.0.0/.gitignore''.
```
Fixes: #2845
Signed-off-by: Fabiano Fidêncio <fabiano@fidencio.org>
The guest kernel configuration suggested for Kata, and which is used by the
CI didn't include CONFIG_PCI_MMCONFIG. That's kind of weird, MMCONFIG is
the modern normal way of handling configuration cycles.
In addition, due to a complex set of interactions through the ACPI code,
disabling MMCONFIG means that SHPC hotplug doesn't work: the driver is
included in the guest kernel, but will fail to probe on PCI to PCI bridges,
meaning it won't actually be activated.
Enable MMCONFIG so that we suggest and testa more typical guest kernel
configuration.
fixes#2288
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
We explicitely set the Postion Independant Executlable (PIE) options
in the extra CFLAGS and LDFLAGS that are passed to the QEMU configure
script for all archs. This means that these options are used pretty
much everywhere, including when building the sample plugins under the
test directory. These cannot be linked with -pie and break the build,
as experienced recently on ARM (see PR #2732).
This only broke on ARM because other archs are configured with
--disable-tcg : this disables plugins which are built by default
otherwise.
The --enable-pie option is all that is needed. The QEMU build system
knows which binaries should be created as PIE, e.g. the important
bits like QEMU and virtiofsd, and which ones should not, e.g. the
sample plugins that aren't used in production.
Rely on --enable-pie only, for all archs. This allows to drop the
workaround that was put in place in PR #2732.
Fixes: #2757
Signed-off-by: Greg Kurz <groug@kaod.org>
The centos ppc64le gpg key at mirror.centos.org doesn't exist (link rot?).
Replacing it with url from CentOS/sig-core-AltArch on github.
Fixes: #2676
Signed-off-by: Aaron Simmons <paleozogt@gmail.com>
Optional build types are common for early adoption.
Lets add a flag to build and optional config.
e.g.
kernel-build.sh -b experimental
In the future instead of add more flags just add a new build type.
Signed-off-by: Carlos Venegas <jose.carlos.venegas.munoz@intel.com>
After 5.11-rc4, memory hotplug alignment size is reduced to 128M for 4K
page.
It works better for memory hotplug and nvdimm plug in kata on arm.
without this patch, memory hotplug will fail for the current memory
hotplug alignment is 1G but the nvdimm size align with 128M in kata.
After port it here, we can avoid a fix in qemu side.
Note: if you change the page size to other size than 4K, memory hotplug
will has no effect.
Fixes: #2707
Signed-off-by: Jianyong Wu <jianyong.wu@arm.com>
For qemu 6.1.0 build on arm64, compile error occurs when "-pie" is added
to ldflag.
tests/plugins/empty.c won't be linked as a sysmbol is missing.
I consider there maybe a bug.
Before figure it out, we should disable plugins for qemu 6.1.0 on arm64.
Fixes: #2707
Signed-off-by: Jianyong Wu <jianyong.wu@arm.com>
Since the qemu upgrade to v6.1.0, the build fails
with a linking issue. Adding --disable-tcg to fix
it.
Fixes: #2710
Signed-off-by: Amulya Meka <amulmek1@in.ibm.com>
A related dir is needed when apply qemu patch using script. As qemu 5.1
is used for arm, a dir of "v5.1.0" is needed under tag_patches.
Fixes: #2696
Signed-off-by: Jianyong Wu <jianyong.wu@arm.com>
Let's make it as clear as possible for the user that if they go for a
tagged version of kata-deploy, eg, 2.2.1, they'll have the kata runtime
2.2.1 deployed on their cluster.
Suggested-by: Eric Adams <eric.adams@intel.com>
Signed-off-by: Fabiano Fidêncio <fidencio@redhat.com>
Let's add more instructions in the README in order to make clear to the
reader what they can do to check whether kata-deploy is ready, or
whether they have to wait till proceeding with the next instruction.
Suggested-by: Eric Adams <eric.adams@intel.com>
Signed-off-by: Fabiano Fidêncio <fidencio@redhat.com>
There's only one QEMU runtime class deployed as part of kata-deploy, and
that includes virtiofs support (which is the default for quite some time
already). Knowing this, let's just remove the `qemu-virtiofs` runtime
class definition.
Signed-off-by: Fabiano Fidêncio <fidencio@redhat.com>
Let's teach our `update-repository-version.sh` script to properly update
the kata-deploy tags on both kata-deploy and kata-cleanup yaml files.
The 3 scenarios that we're dealing with, based on which branch we're
targetting, are:
```
1) [main] ------> [main] NO-OP
"alpha0" "alpha1"
+----------------+----------------+
| from | to |
-----------------+----------------+----------------+
kata-deploy | "latest" | "latest" |
-----------------+----------------+----------------+
kata-deploy-base | "stable | "stable" |
-----------------+----------------+----------------+
2) [main] ------> [stable] Update kata-deploy and
"alpha2" "rc0" get rid of kata-deploy-base
+----------------+----------------+
| from | to |
-----------------+----------------+----------------+
kata-deploy | "latest" | "rc0" |
-----------------+----------------+----------------+
kata-deploy-base | "stable" | REMOVED |
-----------------+----------------+----------------+
3) [stable] ------> [stable] Update kata-deploy
"x.y.z" "x.y.(z+1)"
+----------------+----------------+
| from | to |
-----------------+----------------+----------------+
kata-deploy | "x.y.z" | "x.y.(z+1)" |
-----------------+----------------+----------------+
kata-deploy-base | NON-EXISTENT | NON-EXISTENT |
-----------------+----------------+----------------+
```
And we can easily cover those 3 cases only with the information about
the "${target_branch}" and the "${new_version}", where:
* case 1) if "${target_branch}" is "main" *and* "${new_version}"
contains "alpha", do nothing
* case 2) if "${target_branch}" is "main" *and* "${new_version}"
contains "rc":
* change the kata-deploy & kata-cleanup tags from "latest" to
"${new_version}".
* delete the kata-deploy-stable & kata-cleanup-stable files.
* case 3) if the "${target_branch}" contains "stable":
* change the kata-deploy & kata-cleanup tags from "${current_version}"
to "${new_version}".
Signed-off-by: Fabiano Fidêncio <fidencio@redhat.com>
Similar to the instructions we have for the "latest" images, let's also
add instructions about the "stable" images.
Signed-off-by: Fabiano Fidêncio <fidencio@redhat.com>
Let's just point to our repo URLs rather than assume users using
kata-deploy will have our repo cloned.
Signed-off-by: Fabiano Fidêncio <fidencio@redhat.com>
This is **not** the nicest patch of my career, and I know it adds code
duplication. However, I've decided to take this approach in order to
have easier / better instructions for users who're consuming
kata-deploy.
Having both stable & latest yaml on `main` will let us point to just one
place, without having to update the instructions.
I know, would be better to have those generated from a .in file,
wouldn't it? For sure, but then we'd lose the ability to just point to
those files from kata-deploy pages (either on dockerhub or quay.io).
Signed-off-by: Fabiano Fidêncio <fidencio@redhat.com>
Instead of point to a specific release number, let's point to the
`latest` tag on the main branch.
There's still some work needed in order to point to the `stable` tag on
the stable-x.y branches, as this is something that should be done
automagically as part of the release process.
Signed-off-by: Fabiano Fidêncio <fidencio@redhat.com>
This brings it back into line with the normal qemu version. We refer to
v6.1.0 by full SHA in versions.yaml, rather than the tag, so that
apply_patches.sh sees it as different and applies the virtiofs DAX patches
which is what the experimental version is actually about having.
The virtiofs DAX patches themselves are updated to the version from
https://gitlab.com/virtio-fs/qemu, virtio-fs-dev branch as of commit
3620cb0a.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
We need qemu-6.1 for ACPI PCI hotplug support for the q35 machine. At the
moment qemu will use SHPC hotplug under the PCIe to PCI bridge on q35.
SHPC is too slow to use for our purposes (it requires a 5s delay).
Update the qemu version to v6.1.0. This leaves the experimental version
*older* than the normal version, but we'll fix that up later.
We also need to tweak the snapcraft.yaml, since the location for configs
has changed in the new qemu version.
fixes#1691
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
If the script doesn't find a patches directory it expects, it gives an
error saying to create a dummy 'no_patches' file if you really don't want
any patches applied for that version.
But actual practice in the tree is to call the dummy file 'no_patches.txt'
rather than simply 'no_patches'. Correct the message to match existing
practice.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
If a binary tarball for a single component is done,
the logs will be shown in stdout.
e.g.
make kernel-tarball
To build all a the same time still store logs in files.
make kata-tarball
Signed-off-by: Carlos Venegas <jose.carlos.venegas.munoz@intel.com>
Now that local-build kata-deploy makefile is inlucded in toplevel
makefile, lets use the suffix `-tarball` to avoid name collitions
and identify the tarball releted targets.
Signed-off-by: Carlos Venegas <jose.carlos.venegas.munoz@intel.com>
zsh doesn't support "==" as equal comparison operator, so
replace "==" with "=" to make the script more portable
Fixes: #2584
Signed-off-by: Binbin Zhang <binbin36520@gmail.com>
The current default config in qemu for arm64 doesn't suit for qemu
version 5.1+, so remove them here.
Fixes: #2595
Signed-off-by: Jianyong Wu <jianyong.wu@arm.com>
This patch fixes inconsistent calculations of the rootfs size.
For `du` and `df`, `-B 1MB` is different from `-BM`. The
former is the power of 1000, and the latter is the power of
1024. So comparing them doesn't make sense. The bug may result
in a larger image than needed.
Fixes: #2560
Signed-off-by: Yujia Qiao <rapiz3142@gmail.com>
There is no need to keep multiple copies of the license file in
different directory. We can just use the top level one for the project.
Fixes: #2553
Signed-off-by: Peng Tao <bergwolf@hyper.sh>
- tracing: Change runtime tracing tags to vars
- shimv2: add logging to shimv2 api calls
- drop qemu-lite support
- runtime: delete types or const that no longer needed
- runtime: Optimize the way slice created
- virtcontainers: simplify tests
- virtcontainers: clh: Upgrade to the openapi-generator v5.2.1
- build_image: Fix error soft link about initrd.img
- ci: Temporarily skip agent shutdown test on s390x
- Fix version parsing for firecracker version 0.25 and over
- Osbuilder fixes
- docs: update the GoDoc url from runtime project to kata-containers/sr…
- docs: update `how-to` README file for Firecracker config
- ci/openshift-ci: Pull centos from registry.centos.org
- docs: update containerd CRI plugin url
2250360b docs: remove mentioning of qemu-lite
a9de761d runtime: drop qemu-lite support
8ae3edbc runtime: fix default hypervisor path
0c7789fa runtime: Add container field to logs
72e3538e shimv2: add information to method comment
8dadca9c shimv2: add logging to shimv2 api calls
a99fcc3a virtcontainers: simplify tests
39ffd8ee runtime: delete types or const that no longer needed
ff37f5c7 runtime: Optimize the way slice created
8f0f949a tracing: Move dynamically added attributes to Trace()
932ee41b virtcontainers: clh: Workaround incorrect default values
bff38e4f virtcontainers: clh: Fix the unit test
d967d3cb virtcontainers: clh: Use constructors to ensure proper default value
87de26bd tracing: Modify Trace() to accept multiple tag maps
8058e972 tracing: Change runtime tracing tags to vars
a6a2e525 virtcontainers: clh: Migrate to use the updated client APIs
9de1129b osbuilder: Fix rootfs-builder when running in VMs
65a1e131 osbuilder: Allow running the tool several times
a4214738 osbuilder: Fix Makefile
b8717f35 ci: Temporarily skip agent shutdown test on s390x
938981be build_image: Fix error soft link about initrd.img
2304f935 docs: update the GoDoc url from kata 1.x to 2.x
2a614577 docs: update `how-to` README file for Firecracker config
486baba7 docs: update containerd CRI plugin url
46eb07e1 virtcontainers: clh: Re-generate the client code
80fba4d6 virtcontainers: clh: Upgrade to the openapi-generator v5.2.1
8594f80c ci/openshift-ci: Pull centos from registry.centos.org
87bbae1b fc: fix version parsing for fc >= 0.25
Signed-off-by: Fabiano Fidêncio <fidencio@redhat.com>
The script runs apt sync at some point which scans all possible fds
in order to close them. The operation is incredibly slow on VMs
and may lead to build timeouts.
Fix it by limiting the container runtime fds to a sane limit.
Fixes: #2510
Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
Once the ${ROOTFS_DIR} is created, the tool can't run the second
time since the directory is populated and the debootstrap tool
will fail.
Fix by deleting the contents of ${ROOTFS_DIR} if the directory exists.
Note that running make clean will also allow the re-run, it
is only an optimization for some cases the build fails in the middle.
Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
Let the DISTRO variable to be set from outside,
allowing "sudo -E DISTRO=<ANY> make clean" to delete the correct files.
Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
- use CRI in kata-monitor
- config: Enable jailer by default when using firecracker
- workflows: Actually push the release to quay.io
- docs: update general wording for installation documentation
- Cleanup kernel packaging
- tracing: Return context in runHooks() span creation
- osbuilder: Document no Alpine support on s390x
- osbuilder: Upgrade Ubuntu guest to 20.04
- agent: watcher / inotify stability fixes
- enable snap build for arm64
- agent: Fix cargo 1.54 clippy warning
- osbuilder: Drop Go agent support
- kernel: PTP_KVM support for arm/arm64 in Kata
- docs: update the docs project url from kata 1.x to 2.x
- clh: correct cloud-hypervisor installation on non-x86
- virtcontainers: fc: properly remove jailed block device
- CI: Call agent shutdown test
- kata deploy: always update the base image
- docs: Remove kata-proxy and invalid script reference
- workflows: Actually login to quay.io
- kata-deploy: Update our content to use / point to quay.io/kata-containers rather than katadocker
- agent: Create the process CWD when it does not exist
- Update Kata to allow it to use Qemu 6.1
- osbuilder/dracut: Add missing libraries
- osbuilder: pass env OS_VERSION
- tools: shorten directory path
- virtcontainers: clh: Do not use the default HTTP client
- docs: update kata deploy README doc to add cloud-hypervisor test command
- Container: Add initConfigResourcesMemory and call it in newContainer
- qemu/arm: remove nvdimm/"ReadOnly" option on arm64
- Fix issue container start fail if io.katacontainers.container.resource.swap_in_bytes and memory_limit_in_bytes are not set
- docs: Add tracing proposals doc
- docs: Remove table of contents
- static-checks: Check for the `force-skip-ci` label on each step
- docs: update the kata release url in the kata deploy document
- kata-deploy: Allow build kata-deploy tarball from HEAD
- mod: unify runc and containerd dependencies
- how-to-use-virtio-mem-with-kata.md: Remove undefined ${REPORT_DIR}
- ci: Run static checks when PRs are updated
- docs: update url for log parser in how-to-import-kata-logs-with-fluen…
- versions: Upgrade to Cloud Hypervisor v17.0
- snap: Substitute image configuration with initrd
- docs: Update url for log parser in Developer guide
- mount: fix the issue of missing check file exists
- build(deps): bump github.com/containerd/containerd from 1.5.2 to 1.5.4 in /src/runtime
- docs: Update experimental documentation
- snap: do not export agent version
- Upgrade runc to 1.0.1
- runtime: read-only NVDIMM
- osbuilder/scripts: add support to yq version 4 and above
- osbuilder: update centos arm rootfs image config 'GPG_KEY_ARCH_URL'
- monitor: mv the monitor socket into sbs directory
- fix govet fieldalignment
- docs: added a glossary to support SEO tactics
- ci: expand $CI to nothing
- Add swap support
- snap: fixed snap aarch64 qemu patches dir in snapcraft.yaml file
- agent: clear MsFlags if the option has clear flag set
- snap: Remove QEMU before clone
- docs: fix minikube installation guide runtimeclasses error
- docs: fixed kata-deploy path for kata logs with fluentd doc
- agent/agent-ctl: update tokio to 1.8.1
- ci: set -o nounset
- static-checks: Add a make target to run static-checks locally
- virtiofsd: fix the issue of missing stop virtiofsd
- docs: Update containerd configuration format
- osbuilder: Skip installing golang for building rootfs
- agent-ctl: Use a common Makefile style like other components
- vsock-exporter: switch to tokio runtime
- config: Fix description for OCI hooks
- shimv2: fix the issue of kata-runtime exec failed
7a5ffd4a config: Enable jailer by default when using firecracker
2cb7b513 docs: update general wording for installation documentation
76f4588f workflows: Actually push the release to quay.io
b980c62f packaging/kernel: Update kernel build doc
99e9a6ad packaging/kernel: Update versions.yaml kernel urls
c23ffef4 packaging/kernel: Remove old Jenkins pipeline
9586d482 tracing: Return context in runHooks() span creation
6a6dee7c osbuilder: Document no Alpine support on s390x
71f304ce agent: watcher: cleanup mount if needed when container is removed
f1a505db agent: Temporarily allow unknown linters
961aaff0 agent: watcher: fixes to make more robust
7effbdeb osbuilder: Upgrade Ubuntu guest to 20.04
99ab91df docs: update the docs project url from kata 1.x to 2.x
4fe23b19 kernel: PTP_KVM support for arm/arm64 in Kata
f981fc64 clh: correct cloud-hypervisor installation
f87cee9d kata-deploy: Rely directly on a centos:7 image
6871aeaa snap: enable snap build for arm64
15e0a3c8 kata-deploy: Remove unneeded yum cached files
d01aebeb kata-deploy: Ensure the system is up-to-date
77160e59 workflows: Actually login to quay.io
b9e03a1c docs: update the image repository to quay.io
f47cad3d tools: Update the image repository to quay.io
9fa1febf workflows: Also push the image to quay.io
233b53c0 agent: Fix cargo 1.54 clippy warning
2d8386ea kata-monitor: add few unit tests
8714a350 kata-monitor: make code to identify kata pods simpler
68a6f011 kata-monitor: drop the runtime info from the sandbox cache
97dcc5f7 kata-monitor: drop getMonitorAddress()
0b03d97d vendor: update vendors for kata-monitor
c2f03e89 kata-monitor: talk to the container engine via the CRI
c867d1e0 osbuilder: Drop Go agent support
1d25d7d4 docs: Remove kata-proxy and binaries reference
64dd35ba virtcontainers: fc: properly remove jailed block device
b8133a18 osbuilder/dracut: Add missing libraries
831c2fee packaging: Remove reference to sheepdog driver
2e28b714 packaging: Drop support for qemu < 5.0
d5f85698 vendor: Update govmm
31650956 runtime/qemu: Use explicit "on" for kernel_irqchip parameter
a72b0811 osbuilder: pass env OS_VERSION
d007bb85 kata-deploy: shorten directory path
e6408fe6 Container: Add initConfigResourcesMemory and call it in newContainer
49083bfa agent: Create the process CWD when it does not exist
ee90affc newContainer: Initialize c.config.Resources.Memory if it is nil
767a41ce updateResources: Log result after calculateSandboxMemory
760ec4e5 virtcontainers: clh: Do not use the default HTTP client
3fe6695b static-checks: Check for the `force-skip-ci` label on each step
7df56301 CI: Call agent shutdown test
57b696a5 docs: Removed mention of 1.x
4f0726bc docs: Remove table of contents
f186c5e2 docs: Fix invalid URLs
7c610a6f docs: Fix shell code
80afba15 docs: update kata deploy README doc to add cloud-hypervisor test command
5a0d3c4f docs: update the kata release url in the kata deploy document
9514dda5 mod: unity containerd dependency
6ffe37b9 mod: unify runc dependency
5b514177 docs: Add tracing proposals doc
b53e8405 how-to-use-virtio-mem-with-kata.md: Remove undefined ${REPORT_DIR}
5957bc7d ci: Run static checks when PRs are updated
81e6bf6f kata-deploy: Split shimv2 build in a separate container.
d46ae324 kernel: build: Add container build
b789a935 actions: release: Use new kata-deploy scripts.
85987c6d kata-deploy: Add Makefile
b9d2eea3 kata-deploy: Add script to merge kata tarballs.
4895747f Rootfs: Add curl to alpine rootfs builder.
fc90bb53 Actions: Add new workflow to create static tarballs
bbb06c49 actions: Remove scripts from actions directory.
2f9859ab build: Reuse firecracker directory on builds.
3533a5b6 Packaging: stop using GOPATH for yq.
0c5ded4b kata-deploy: build kata only with docker in host
2ec31093 docs: update url for log parser in how-to-import-kata-logs-with-fluentd.md
cc0bb9ae versions: Upgrade to Cloud Hypervisor v17.0
8e9ffe6f snap: Substitute image configuration with initrd
8b15eafa docs: Update url for log parser in Developer guide
77604de8 qemu/arm: remove nvdimm/"ReadOnly" option on arm64
4fbae549 docs: Update experimental documentation
07f7ad9d build(deps): bump github.com/containerd/containerd in /src/runtime
9c0b8a7f snap: do not export agent version
3727caf7 versions: Update runc to 1.0.1
116c29c8 cgroups: manager's Set() now takes Resources as its parameter
c0f801c0 rootless: RunningInUserNS() is now part of userns namespace
b5293c52 runtime: update runc dependency to 1.0.1
2859600a runtime: virtcontainers: make rootfs image read-only
8befb1f3 kata-deploy: Refactor builder options.
7125f5d8 image-builder: Allow build image and initrd independently.
0f8c0dbc osbuilder/scripts: add support to yq version 4 and above
070590fb vendor: update govmm
b4c45df8 runtime: tools/packaging/cmd/kata-pkgsync: fix govet fieldalignment
aec53090 runtime: virtcontainers/utils: fix govet fieldalignment
1e4f7faa runtime: virtcontainers/types: fix govet fieldalignment
bb9495c0 runtime: virtcontainers/pkg: fix govet fieldalignment
80ab91ac runtime: virtcontainers/persist: fix govet fieldalignment
54bdd018 runtime: virtcontainers/factory: fix govet fieldalignment
dd58de36 runtime: virtcontainers/device: fix govet fieldalignment
47d95dc1 runtime: virtcontainers: fix govet fieldalignment
8ca7a7c5 runtime: netmon: fix govet fieldalignment
31de8eb7 runtime: pkg: fix govet fieldalignment
2b80091e runtime: containerd-shim-v2: fix govet fieldalignment
0dc59df6 runtime: cli: fix govet fieldalignment
c1042523 ci: expand $CI to nothing
add480ed monitor: mv the monitor socket into sbs directory
f7c6f170 docs: added a glossary to support SEO tactics
a8649acf snap: fixed snap aarch64 qemu patches dir in snapcraft.yaml file
38826194 osbuilder: update centos arm rootfs image config 'GPG_KEY_ARCH_URL'
c5fdc0db docs: fix minikube installation guide runtimeclasses error
f2ef25c6 docs: fixed kata-deploy path for kata logs with fluentd doc
cb6b7667 runtime: Add option "enable_guest_swap" to config hypervisor.qemu
a733f537 runtime: newContainer: Handle the annotations of SWAP
2c835b60 ContainerConfig: Set ocispec.Annotations to containerConfig.Annotations
243d4b86 runtime: Sandbox: Add addSwap and removeSwap
e1b91986 runtime: Update golang proto code for AddSwap
4f066db8 agent: agent.proto: Add AddSwap
4f23b8cd ci: set -o nounset
35cbc93d agent: clear MsFlags if the option has clear flag set
ff87da72 config: Fix description for OCI hooks
8e0daf67 shimv2: fix the issue of kata-runtime exec failed
b12b21f3 osbuilder: Skip installing golang for building rootfs
558f1be6 snap: Remove QEMU before clone
5371b921 mount: fix the issue of missing check file exists
27b299b2 agent-ctl: Use a common Makefile style like other components
05084699 agent-ctl: bump to latest tokio
acf69328 agent: update tokio to 1.8.1
dcd29867 static-checks: Call the static-checks make target
afd97850 makefile: Add static-checks target
34828df9 virtiofsd: fix the issue of missing stop virtiofsd
73d3798c vsock-exporter: switch to tokio runtime
7960689e tracing: replace SimpleSpanProcessor with BatchSpanProcessor
e887b39e docs: Update containerd configuration format
Signed-off-by: Fabiano Fidêncio <fidencio@redhat.com>
Alpine used to work as guest under 1.x, but because there is no musl
target for Rust on s390x, Alpine will not work for 2.x. Document this.
Fixes: #2436
Signed-off-by: Jakob Naucke <jakob.naucke@ibm.com>
- no need to create `/usr/lib/systemd/systemd` link any more
- install `chrony` as extra package and install extra packages in chroot
rather than `debootstrap`, because `chrony` provides `time-daemon`,
which under 20.04 is provided by `systemd-timesyncd`, which is
required by `systemd`, and `debootstrap`'s conflict resolvement can't
handle this, but `apt`'s can.
Fixes: #2147
Depends-on: github.com/kata-containers/tests#3636
Signed-off-by: Jakob Naucke <jakob.naucke@ibm.com>
This work patched the 4.19, 5.4 and 5.10 kernels, and now ptp_kvm can work
correctly when the host and guest use different kernel versions..
Fixes: #2123
Signed-off-by: Damon Kwok <damon-kwok@outlook.com>
Currently, there is cloud hypervisor binary released only for x86, thus
we must build from source code when install cloud hypervisor on arm64.
Fixes: #2410
Signed-off-by: Jianyong Wu <jianyong.wu@arm.com>
Instead of relying on a centos/docker image, present only on dockerhub,
let's rely on the centos:7 image from the centos registry, and apply
the same modifications applied when generating the centos/systemd image.
The main reason for doing this is avoiding to update an image from 3
years ago, making the delta of the packages updated smaller.
If you're curious why we keep using CentOS 7 though, the reason is
because CentOS 8, and UBI images have a different systemd configuration
that works quite well when mounting the image using podman, but systemd
can't connect dbus when running on environments like AKS or even
minikube. So, in order to be as compatible as possible, let's keep
using the CentOS 7 image for now, at least till we find a suitable
substitute for that.
Signed-off-by: Fabiano Fidêncio <fidencio@redhat.com>
Let's just remove the cached failes as those are not needed for anything
we do when using this image.
Signed-off-by: Fabiano Fidêncio <fidencio@redhat.com>
In order to avoid providing an image with security issues, let's ensure
we run `yum update` as part of our image build process. This is needed
as even with the latest CentOS images there may be fix provided by some
CVE that's already part of the updates but not yet part of the image.
In our case, it's even more needed as the `centos/systemd` image has not
been updated for 3 years or so and those are the vulnerabilities found
in the current images:
https://quay.io/repository/kata-containers/kata-deploy?tab=tagsFixes: #2303
Signed-off-by: Fabiano Fidêncio <fidencio@redhat.com>
With Kata 1.x EOL, the Go agent is no more. So, remove support for it from
the osbuilder scripts. This removes the RUST_AGENT variable, treating it
as always true.
fixes#2396
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
When the guest is built using dracut and the agent uses glibc (esp.
ppc64le/s390x), libraries might be missing. In my case, it was
`libutil.so`, but more can be added easily. Add a script to configure
`install_items` for dracut w.r.t. `ldd` of the agent.
Fixes: #2384
Signed-off-by: Jakob Naucke <jakob.naucke@ibm.com>
The QEMU sheepdog driver was deprecated in 5.2.0 and removed entirely in
6.1. Explicitly disabling, therefore is unnecessary from 5.2.0 and will
give an error from 6.1.
fixes#2337
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
We only test qemu 5.2 in the CI (5.1 for ARM), and I believe we already
have some subtle dependencies that will stop things working on older qemu
versions.
We just updated govmm to a version that explicitly only works with qemu 5.0
and later, so we can drop stale checks for older qemu versions. More
specifically that means we can drop patches for older qemu versions, and
remove checks for older qemu versions from configure-hypervisor.sh.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
With lines like
0a2e2c6038/tools/osbuilder/rootfs-builder/fedora/config.sh (L8)
we imply that one can set another OS_VERSION and it will get picked up.
This is not the case when building inside Docker/Podman because the
variable is not passed to the container, which can lead to confusion.
Forward this env.
Fixes: #2378
Signed-off-by: Jakob Naucke <jakob.naucke@ibm.com>
long file paths are difficult to read, this change adds a new readonly variable to shorten the full file path of the static build folder files.
Fixes: #2354
Signed-off-by: Joao Vanzuita <joaovanzuita@me.com>
Removed all TOCs now that GitHub auto-generates them.
Also updated the documentation requirements doc removing the requirement
to add a TOC.
Fixes: #2022.
Signed-off-by: James O. D. Hunt <james.o.hunt@intel.com>
Kata deploy README document only contains Firecracker and Qemu. This PR adds
cloud-hypervisor test command to the README.md file.
Fixes: #2357
Signed-off-by: wangyongchao.bj <wangyongchao.bj@inspur.com>
Add makefile to document possible options to run.
e.g
Default: Create a kata tarball, it will build assets concurrently.
```
$ make
```
Create a tarball build for cloud-hypervisor.
```
$ make cloud-hypervisor
```
Signed-off-by: Carlos Venegas <jos.c.venegas.munoz@intel.com>
If alpine image is created inside a container,
it does not get any golang version data. It will try
to get it by installing yq. To install yq curl is used.
Signed-off-by: Carlos Venegas <jos.c.venegas.munoz@intel.com>
kata-deploy buider now reuses the build directory, this
makes faster rebuilds. Update firecracker builder to
not fail if is called twice.
Signed-off-by: Carlos Venegas <jos.c.venegas.munoz@intel.com>
Use the yq installed in the env. Needed
to build kata from docker. The container builder
has not an initial Go env.
Signed-off-by: Carlos Venegas <jos.c.venegas.munoz@intel.com>
Add script to build kata using docker.
Allow build kata-deploy binaries using docker.
kata-deploy-binaries-in-docker.sh is a wrapper of
kata-deploy-binaries.sh it will call kata-deploy-binaries.sh in a
container with all the dependencies installed.
Signed-off-by: Carlos Venegas <jos.c.venegas.munoz@intel.com>
Update kata-deploy-binaries.sh cli options.
Add options to allow ask build a tarball for a specific asset.
It will help developers build a specific component and update
a kata-deploy installation. Also build each asset independetly
can help to create cache tarballs per asset in the future.
e.g. Build a tarball with shimv2.
```
./kata-deploy-binaries.sh --build=shim-v2
```
Additionally, the script path is moved to a new directory
as not only will work for releases.
Signed-off-by: Carlos Venegas <jos.c.venegas.munoz@intel.com>
yq changed syntax in an incompatible way starting from version 4 and
above. Deal with that.
Fixes: #2297
Signed-off-by: Francesco Giudici <fgiudici@redhat.com>
Building rootfs does not depend on golang, delete intalling
golang may save build time.
And there is only rust agent now, the code for golang agent should
be deleted too.
Fixes: #2170
Signed-off-by: bin <bin@hyper.sh>
While doing the release we've faced the following issue:
```
Dockerfile for action: '/home/runner/work/kata-containers/kata-containers/./packaging/kata-deploy/action/Dockerfile'.
/usr/bin/docker build -t 8a33c1:c0625fe487ce5e4c8217747bef28861f -f "/home/runner/work/kata-containers/kata-containers/./packaging/kata-deploy/action/Dockerfile" "/home/runner/work/kata-containers/kata-containers/packaging/kata-deploy/action"
Sending build context to Docker daemon 15.87kB
Step 1/12 : FROM microsoft/azure-cli:latest
pull access denied for microsoft/azure-cli, repository does not exist or may require 'docker login': denied: requested access to the resource is denied
```
Carlos pointed out that the image has gone awry and that we could use
mcr.microsoft.com/azure-cli instead.
Fixes: #2240
Signed-off-by: Fabiano Fidêncio <fidencio@redhat.com>
- runtime: Register defer function at early stage
- Ensure the go vendored code is up-to-date and that we actually can call `cargo vendor` on every pull-request
- ci: add golang 1.16 to the CI
- Update outdated comments and do some minor reworks
- snap: Build initrd on ppc64le & s390x
- ci: static checks: use defined target_branch
- trace-forwarder: Add option rustflags, target, build-type for the make
- CI: Honour force-skip-ci label
- qemu: stop the virtiofsd specifically
- tracing: Consolidate tracing into a new katatrace package
- runtime: return error if clh's binary doesn't have a normal stat
- osbuilder: Fix the order of checking the distro config directory
- agent: Fix to parsing of /proc/self/mountinfo
- runtime: Fix lint issues
- snap: Miscellaneous s390x fixes
- runtime: Use CC=gcc on all RPM-based s390x
- s390x: Enable virtio-blk-ccw
- forwarder: Add dump only option
- shimv2: fix the issue of leaking the hypervisor processes
- runtime: Remove the version check for cloud hypervisor
- agent: fix wrong regular exp to fetch guest-cid
- runtime: refact virtcontainers/pkg/oci
- agent: enhance tests of execute_hook
- agent: Cleanup config
- Pass span context from runtime to agent to get a full trace #1968
- agent: update netlink libraries
- shimv2: update containerd vendor
- runtime: Format golang proto code
- agent: delete some lint attributes
- docs: Fix url in virtiofs documentation
- tools: agent-ctl: Fix build failure
- cargo: Use latest nix crate for all Rust code bases
- virtcontainers: Don't fail memory hotplug
- Add "watchable-mounts" concept to allow for inotify support of specific types of mounts.
- tracing: Make runHooks() span creation return context
- kernel: Add Secure Execution guest
- packaging: Support Podman in QEMU build
- Update qat version
- docs: Set LIBC=gnu for s390x too
- shimv2: fix the issue of leaking wait goroutines
- runtime: report finish time in containers stats
- docs: Fix typos in Developer Guide
- docs: Update urls for Documentation Requirements document
- runtime: update default machine type to q35
- docs: fix brackets usage error for developer guide
- Remove the pc machine
- runtime: do not hot-remove PMEM devices
- docs: Update kata-deploy urls for installation document
- docs: Update url for installation guides
- agent: Add some mount options and sort the options alphabetically
- runtime: using detail propertites instead of function name in log field
- qemu: Add nvdimm read-only file support
- ci: snap: Fetch history to all branches and tags
- memory_offset must be larger than 32 bit
- containerd-shim-v2: Skip TestIoCopy unit test
- ppc64le: Adding test for appendProtectionDevice
- agent: Update rust version for tokio
- Upgrade mio to v0.7.13 to fix epoll_fd leak problem
- osbuilder: fix log message that is not error but seems like an error
- docs: Update url for breaking compatibility
- docs: Remove docker support with kata 2.x and sysctls
- docs: Update README for runtime documentation
- Support SEV
- test: Add a unit test for ioCopy()
- versions: Upgrade to cloud-hypervisor v16.0
e3860691 static-checks: Restrict static checks to go 1.15 and 1.16
f4fbf723 runtime: Update vendored code
a20074d4 static-checks: Check the vendored code
ac8f972e build: Add `make vendor`
f9643d83 agent-ctl: Add `make vendor`
5e69b498 trace-forwarder: Add `make vendor`
a104f132 agent: Add `make vendor`
579b3f34 runtime: Add `make vendor`
930ca55d runtime: Add `make handle_vendor`
39546a10 runtime: delete not used functions
d0bc148f runtime: Register defer function at early stage
350acb2d virtcontainers: refactoring code for error handling in sandbox
858f39ef virtcontainers: update wrong comments for code
e0a19f6a virtcontainers: update API documentation
8d6dd2ad snap: support golang 1.16.x
a48dc93f versions: update newest golang version
37996791 ci: add 1.16 to the list of golang versions to test
6999dcca trace-forwarder: Add option rustflags, target, build-type for the make
7db8a85a CI: Honour force-skip-ci label
007a6561 snap: Build initrd on ppc64le & s390x
9b8cc458 ci: static checks: use defined target_branch
9081bee2 runtime: return error if clh's binary has not a normal stat
b10e3e22 tracing: Consolidate tracing into a new katatrace package
88e70759 osbuilder: Fix the order of checking the distro config directory
1ab72518 agent: Fix to parsing of /proc/self/mountinfo
8f76626f qemu: stop the virtiofsd specifically
da3de3c2 shim-v2: Fix `gosimple` issue on utils_test.go
305fb054 virtcontainers: Fix `gosimple` issue on client.go
89cf168c virtcontainers: Ignore a staticcheck error on cpuset.go
2cc9006c snap: Miscellaneous s390x fixes
28b2c629 runtime: Use CC=gcc on SUSE s390x too
cfd690b6 virtcontainers: Use virtio-blk-ccw on s390x
8758ce26 agent: Enable virtio-blk-ccw
a33d6bae forwarder: Add dump only option
4c809a53 shimv2: fix the issue of leaking the hypervisor processes
d08603be runtime: Remove the version check for cloud hypervisor
2c943012 agent: fix wrong regular exp to fetch guest-cid
e6b1766f agent: Cleanup config
55c5c871 agent: enhance tests of execute_hook
bd595124 runtime: add spans and attributes for agent/mount
65d2fb5d agent: remove instrument attribute for some simple functions
cfb8139f agent: add more instruments for RPC calls
ae46e7bf runtime: pass span context to agent in ttRPC client
66dd8719 runtime: refact virtcontainers/pkg/oci
d671f789 agent: fix the issue of convert OCI spec to RPC spec
f607641a shimv2: fix the issue bring by updating containerd vendor
79e632bc version: update the cri-containerd to v1.5.2
32c9ae13 shimv2: update containerd vendor
aa264f91 agent: update netlink libraries
34bdddbe docs: Fix url in virtiofs documentation
3e8a07c4 tools: agent-ctl: Fix build failure
f6294226 cargo: Use latest nix crate for all Rust code bases
064dfb16 runtime: Add "watchable-mounts" concept for inotify support
3f0f1ceb docs: inotify: add initial documentation
6a93e5d5 agent: Initial watchable-bind implementation
57c0cee0 runtime: Cleanup mountSharedDirMounts, shareFile parameters
772c117d kernel: Add Secure Execution guest
f35ba94d packaging: Support Podman in QEMU build
8310a3d7 virtcontainers: Don't fail memory hotplug
ecd13ec4 docs: Update QAT docs with newer driver version
a822cdf6 osbuilder: Update QAT driver version
6a1a051c runtime: report finish time in containers stats
fe0085ca docs: Set LIBC=gnu for s390x too
08984b6e docs: Update urls for Documentation Requirements document
b3623a2c shimv2: fix the issue of leaking wait goroutines
2322f935 runtime: update default machine type to q35
11f9a914 docs: fix brackets usage error for developer guide
1316fa53 docs: Fix typos in Developer Guide
ac6b9c53 runtime: Hot-plug virtio-mem device on PCI bridge
789a5954 virtcontainers: Remove the pc machine
caf5760c runtime: Update golang proto code
bd20701f docs: Update kata-deploy urls for installation document
a9aa36ce docs: Update url for installation guides
ecdd137c runtime: do not hot-remove PMEM devices
000049b6 agent: delete some lint attributes
3f39df0d qemu: Add nvdimm read-only file support
23d31d5a ci: snap: Fetch history to all branches and tags
2022c64f runtime: using detail propertites instead of function name in log field
361bee91 runtime/virtcontrainers: fix alignment structures
6be8bf5c docs: update annotations documentation
7834f412 virtcontainers: change memory_offset to uint64
bd27f7ba agent: Sort PROPAGATION and OPTIONS alphabetically to scan easily
ad06eb90 containerd-shim-v2: Skip TestIoCopy unit test
ea9bb8e9 ppc64le: Adding test for appendProtectionDevice
799cb272 agent: Upgrade mio to v0.7.13 to fix epoll_fd leak problem
45fd58d1 osbuilder: fix log message that is not error but seems like an error
2fb176dd docs: Update url for breaking compatibility
601e2b65 docs: Remove docker support with kata 2.x and sysctls
be316945 virtcontainers: Fix TestQemuAmd64AppendProtectionDevice()
240aae96 docs: Update README for runtime documentation
8825bb29 agent: Update rust version for tokio
cabddcc7 tracing: Make runHooks() span creation return context
e544779c agent: Add some mount options
85c40001 versions: Upgrade to cloud-hypervisor v16.0
b26d5b1d virtcontainers: Support SEV
81c6e4ca runtime/vendor: add github.com/intel-go/cpuid
a918c46f test: Add a unit test for ioCopy()
Signed-off-by: Fabiano Fidêncio <fidencio@redhat.com>
This has a similar intent as the go code, but not totally equal. For
the go code we want to ensure that the vendored code is up-to-date,
while here we want to ensure that `cargo vendor` actually works.
We happened to release a few tarballs where `cargo vendor` didn't work
and it causes some pain for downstream maintainers.
Related: #2159
Signed-off-by: Fabiano Fidêncio <fidencio@redhat.com>
Fix the incorrect regular expression to fetch the guest context ID.
In " [^,][^,]* ", [^,]* will match to the next ",",
which is after "socket", so finally got incorrect result.
Use egrep -o "guest-cid=[0-9]*" instead.
Fixes: #2124
Signed-off-by: Liang Zhou <zhoul110@chinatelecom.cn>
Our dependencies already bring several versions of nix, we should avoid
adding even more fragementation.
Fixes#2114
Signed-off-by: Samuel Ortiz <samuel.e.ortiz@protonmail.com>
Add support for watchable-bind storage driver. When watchable-bind storage
is present, the agent will create a watchable path in a tmpfs, and poll the
watchable-bind source to keep this new mount-point up to date.
This poll will allow the agent to present the mount-point to the
container, allowing for inotify usage by the container workload.
If a mount becomes too large, either in file count or in overall size,
we want to stop treating it as watchable, and instead just treat as a
bindmount. This'll help avoid DoS by growing tmpfs too large, as well
as limiting time spent scanning files. If a watchable-bind grows beyond
8 files (arbitrary sane number for certs/secrets) or 1MB (limit on ConfigMap size),
we treat it as a normal bind.
Fixes: #1879
Signed-off-by: Eric Ernst <eric_ernst@apple.com>
Signed-off-by: Maksym Pavlenko <pavlenko.maksym@gmail.com>
Signed-off-by: Samuel Ortiz <samuel.e.ortiz@protonmail.com>
agent: watcher: SandboxStorages check loop cleanup
Add `CONFIG_PROTECTED_VIRTUALIZATION_GUEST=y` to s390's guest kernel
config, which enables running with a secure image (as generated by
s390-tools' `genprotimg`).
Fixes: #2106
Signed-off-by: Jakob Naucke <jakob.naucke@ibm.com>
Use Podman instead of Docker when $USE_PODMAN is set. This enables
running with Podman, e.g. to import images for CRI-O.
Fixes: #2067
Signed-off-by: Jakob Naucke <jakob.naucke@ibm.com>
For QEMU 5.0.0 it is applied the patches/5.0.x/0002-memory-backend-file-nvdimm-support-read-only-files-a.patch
to fix an issue with the use of read-only files as backend memory of nvdimm devices. When Kata Containers bumped
to QEMU 5.2.0 that patch was left behind by mistake. In meanwhile a proper feature ("nvdimm: read-only file support")
was proposed and merged upstream (see https://mail.gnu.org/archive/html/qemu-devel/2021-01/msg00258.html).
This contain the backport of the commit 8360ebeb4f4a from QEMU master which should be applied on QEMU 5.2.0
so that feature is available to Kata Containers.
Fixes#2011
Signed-off-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
This PR updates the proper url for breaking compatibility for
kata 2.x
Fixes#2031
Signed-off-by: Gabriela Cervantes <gabriela.cervantes.tellez@intel.com>
- Update CC=gcc setting for Fedora s390x
- osbuilder: Streamline s390x CMake & musl handling
- runtime: remove the call to storeSandbox at the end of createSandboxFromConfig
- virtcontainers: Add support for Secure Execution
- agent: Conform to the latest nix version (0.21.0)
- docs: Update the stable branch strategy to what was proposed in our ML
- runtime: add more traces for network
- tools/packaging: clone meson and dependencies before building QEMU
- runtime: remove covertool from cli test
- factory: Use lazy unmount
- docs: Fix Release Process document
- Add sandbox and container ID to trace spans
- agent: Fix fd leak caused by netlink
- metrics: Add virtiofsd exporter
- versions: Update kubernetes to 1.21.1
- tracing: Add basic VSOCK tracing
- agent: Upgrade tokio-vsock to fix fd leak of vsock socket
- runtime: fix some comments and logs
- runtime: Add support for PEF
- cleanup TODOs in runtime
- tracing: Make runtime span attributes more consistent
- virtiofsd: refactor qemu.go to use code in virtiofsd.go
- runtime: remove unused doc.go
- cgroup: fix the issue of set mem.limit and mem.swap
- agent: re-enable the standard SIGPIPE behavior
- virtiofsd: Fix file descriptors leak and return correct PID
- runtime: and cgroup and SandboxCgroupOnly check for check sub-command
- kernel: add ppc64le fragments
- docs: Use --ignore-preflight-errors=all flag
- agent: fix start container failed when dropping all capabilities
- agent: Remove unnecessary underscore(_) variables
- docs: Add instructions for getting QEMU source
- qemu: align before memory hotplug on arm64
- workflows: release kata 2.x snap through the stable channel
- Sandbox bindmount cleanup
- docs: Update add customer agent command
- agent: Stop relying in the unmaintained prctl crate
- how-to-use-virtio-mem-with-kata.md: Update doc to make it clear
- docs: Add document for memory hotplug on arm64
- github: Run require porting labels only at main
- kernel: add confidential guest build option
- rustjail: separated the propagation flags from mount flags
- runtime: improve sandbox cleanup logic
- docs: add note for connecting debug console for old versions
- image_build: align image size to 128M for arm64
- agent: avoid reaping the exit signal of execute_hook in the reaper
- agent: move the dependency tempfile to the dev-dependencies section
- docs: Document test repository changes when creating a stable branch
- docs: Remove horizontal ruler markers that disable spell checks
- docs/Developer-Guide: Add instructions to apply QEMU patches
- runtime: make dialing timeout configurable
- Get sandbox metrics cli
- Support TDx
- packaging/kata-cleanup: add k3s containerd volume
- osbuilder: Upgrade alpine version to 3.13.5
- Monitor cleanup
- Open CONFIG_VIRTIO_MEM in x86_64 Linux kernel
- agent: delete code which is no longer used
- cli: delete tracing code for kata-runtime binary
- docs: add per-Pod Kata configurations for `enable_pprof`
- Fix issue of virtio-mem
- Set fixed NOFILE limit value for kata-agent
- ci/install_yq.sh: install_yq: Check version before return
- runtime: use s.ctx instead ctx for checking cancellation
- runtime: fix some comments
a1247bc0 agent: Conform to the latest nix version (0.21.0)
3130e66d runtime: remove storeSandbox at the end of createSandboxFromConfig
7593ebf9 runtime: Use CC=gcc on Fedora s390x
a484d6db osbuilder: Streamline s390x CMake & musl handling
da2d9ab8 osbuilder: Remove CC=gcc for Fedora s390x
c0c05c73 virtcontainers: Add support for Secure Execution
78f21710 virtcontainers/s390x: Put consts into one block
784025bb runtime: add more traces for network
9ec9bbba tools/packaging: clone meson and dependencies before building QEMU
9158ec68 docs: Fix Release Process document
9e3349c1 agent: Fix fd leak caused by netlink
3d0e0b27 tracing: Add network model to span
8ca02072 tracing: Add sandbox and container ID to trace spans
a9a0eccf tracing: Add basic VSOCK tracing
2234b730 metrics: Add virtiofsd exporter
9bf781d7 agent: Upgrade tokio-vsock to fix fd leak of vsock socket
b68334a1 runtime: fix some comments and logs
1f5b229b runtime: remove FIXME in SandboxState about CgroupPath
fee0004a runtime: remove TODO about hot add memory in qemu.go
2e29ef9c runtime: remove TODO comment from StatusContainer
72cd8f5e virtiofsd: refactor qemu.go to use code in virtiofsd.go
0b22c48d runtime: remove unused doc.go
30f4834c cgroup: fix the issue of set mem.limit and mem.swap
0ae364c8 agent: re-enable the standard SIGPIPE behavior
05a46fed tracing: Make runtime span attributes more consistent
727bfc45 runtime: and cgroup and SandboxCgroupOnly check for check sub-command
b25ad1ab tracing: Make trace-forwarder async
45f02227 tracing: Add trace points
773deca2 virtiofsd: Fix file descriptors leak and return correct PID
37a426b4 runtime: Add support for PEF
fe670c5d docs: Use --ignore-preflight-errors=all flag
5b5047bd docs: Add instructions for getting QEMU source
3e4ebe10 agent: fix start container failed when dropping all capabilities
9a43d76d workflows: release kata 2.x snap through the stable channel
7f1030d3 sandbox-bindmount: persist mount information
089a7484 sandbox: Cleanup if failure to setup sandbox-bindmount occurs
f65acc20 docs: Update add customer agent command
20a382c1 agent: Remove unnecessary underscore(_) variables
4b88532c docs: Don't use Docker as an example of a container manager
4142e424 docs: Don't mention 1.x components as part of the stable branch strategy
a0af2bd7 docs: Use stable-2.x / 2.x.y as example in the branch strategy document
a5e1f66a docs: Maintain only one stable branch per major release
419773b8 docs: Emphasize behaviour changes may be a reason for a major bump
54a75008 docs: Refer to `main` branch in the stable branch strategy document
7dde0b5d kernel: add ppc64le fragments
84906181 kernel: skip fragments for ppc64le
9676b86b kernel: move CONFIG_RANDOMIZE_BASE
bd0cde40 factory: Use lazy unmount
f52468be agent/agent-ctl: Replace prctl crate by the capctl one
d289b1d6 agent-ctl: Perform a `cargo update`
bc36b7b4 qemu: align before memory hotplug on arm64
8aefc793 agent: Perform a `cargo update`
785be0bb how-to-use-virtio-mem-with-kata.md: Update doc to make it clear
f8a16c17 kernel: add confidential guest build option
a65f11ea docs: Add document for memory hotplug on arm64
1b607056 runtime: remove covertool from cli test
fc42dc07 github: Run require porting labels only at main
dbef2b29 versions: Update kubernetes to 1.21.1
35151f17 runtime: sandbox delete should succeed after verifying sandbox state
e5fe572f rustjail: separated the propagation flags from mount flags
ffbb4d9b docs: add note for connecting debug console for old versions
a5bb383c agent: avoid reaping the exit signal of execute_hook in the reaper
ce7a5ba2 agent: move the dependency tempfile to the dev-dependencies section
e24e9462 docs/Developer-Guide: Add instructions to apply QEMU patches
850cf8cd docs: Document test repository changes when creating a stable branch
8068a469 kata-runtime: add `metrics` command
37873061 kata-monitor: export get stats for sandbox
01b56d6c runtime: make dialing timeout configurable
e8038718 osbuilder: Upgrade alpine version to 3.13.5
3caed6f8 runtime: shim: dedup client, socket addr code
4bc006c8 runtime: Short the shim-monitor path
5fdf617e docs: Fix spell-check errors found after new text is discovered
42425456 docs: Remove horizontal ruler markers that disable spell checks
3883e4e2 kernel: configs: Open CONFIG_VIRTIO_MEM in x86_64 Linux kernel
4f61f4b4 virtcontainers: Support TDX
0affe886 virtcontainers: define confidential guest framework
539afba0 runtime: define config options to enable confidential computing
79831faf runtime: use s.ctx instead ctx for checking cancellation
f6d5fbf9 runtime: fix some comments
9381e5f3 packaging/kata-cleanup: add k3s containerd volume
7f7c3fc8 qemu.go: qemu: resizeMemory: Fix virtio-mem resize overflow issue
c9053ea3 qemu.go: qemu: setupVirtioMem: let sizeMB be multiple of 2Mib
a188577e agent: Set fixed NOFILE limit value for kata-agent
88cf3db6 runtime: implement CPUFlags function
2b0d5b25 image_build: align image size to 128M for arm64
d601ae34 agent: delete not used comments
6038da19 agent: delete rustjail/src/configs directory
84ee8aa8 agent: delete not used functions
d8896157 ci/install_yq.sh: install_yq: Check version before return
95e54e3f docs: add per-Pod Kata configurations for enable_pprof
13c23fec cli: delete tracing code for kata-runtime binary
Signed-off-by: Fabiano Fidêncio <fidencio@redhat.com>
This PR removes the travis reference as we currently for kata 2.0,
travis is not being supported.
Fixes#1994
Signed-off-by: Gabriela Cervantes <gabriela.cervantes.tellez@intel.com>
- Merge codepath in lib.sh with ppc64le -- do not install CMake
- Like ppc64le, do not install musl rather than just not using it
Fixes: #1975
Signed-off-by: Jakob Naucke <jakob.naucke@ibm.com>
In some distros (Ubuntu 18 and 20) it's not possible to clone meson
and QEMU dependencies from https://git.qemu.org due to problems with
its certificates, let's pull these dependencies from github before
building QEMU.
fixes#1965
Signed-off-by: Julio Montes <julio.montes@intel.com>
This config is not selected for ppc64le. It is
only supported on PPC32 for now. Moved it to
respective arch base.conf.
Signed-off-by: Amulyam24 <amulmek1@in.ibm.com>
While evaluating the possibility of having kata-agent statically linked
to the GNU libc, we've ended up facing some issues with prctl.
When debugging the issues, we figured out that the crate hasn't been
maintained since 2015 and that the capctl one is a good 1:1 replacement
for what we need.
Fixes: #1844
Signed-off-by: Fabiano Fidêncio <fidencio@redhat.com>
When hotplug memory on arm64 in kata, kernel will shout:
[ 0.396551] Block size [0x40000000] unaligned hotplug range: start 0xc8000000, size 0x40000000
[ 0.396556] acpi PNP0C80:01: add_memory failed
[ 0.396834] acpi PNP0C80:01: acpi_memory_enable_device() error
[ 0.396948] acpi PNP0C80:01: Enumeration failure
It means that kernel will check if the memory range to be hotplugged
align with 1G before plug the memory. So we should twist the qemu to
make sure the memory range align with 1G to pass the kernel check.
Fixes: #1841
Signed-off-by: Yuanzhe Liu <yuanzheliu09@gmail.com>
There is a bug in the CI script checking spelling that causes it
to skip any text that follows a horizontal ruler.
(https://github.com/kata-containers/tests/issues/3448)
Solution: replace one horizontal ruler marker with another that
does not trip the spell-checking script.
Fixes: #1793
Signed-off-by: Christophe de Dinechin <dinechin@redhat.com>
kata-deploy cleanup expects to find containerd configuration
in /etc/containerd/config.toml. In case of k3s mount the k3s
containerd config as a volume.
Fixes#1801
Signed-off-by: Orestis Lagkas Nikolos <olagkasn@nubificus.co.uk>
There is an inconformity between qemu and kernel of memory alignment
check in memory hotplug. Both of qemu and kernel will do the start
address alignment check in memory hotplug. But it's 2M in qemu
while 128M in kernel. It leads to an issue when memory hotplug.
Currently, the kata image is a nvdimm device, which will plug into the VM as
a dimm. If another dimm is pluged, it will reside on top of that nvdimm.
So, the start address of the second dimm may not pass the alginment
check in kernel if the nvdimm size doesn't align with 128M.
There are 3 ways to address this issue I think:
1. fix the alignment size in kernel according to qemu. I think people
in linux kernel community will not accept it.
2. do alignment check in qemu and force the start address of hotplug
in alignment with 128M, which means there maybe holes between memory blocks.
3. obey the rule in user end, which means fix it in kata.
I think the second one is the best, but I can't do that for some reason.
Thus, the last one is the choice here.
Fixes: #1769
Signed-off-by: Jianyong Wu <jianyong.wu@arm.com>
- Update kata-deploy to use CRI-O drop-in files
- Update dependencies versions
- fix build kernel shell error when setup with `-f`
- virtcontainers: Fix virtio-fs on s390x
- Runtimeclass updates
- versions: Upgrade to cloud-hypervisor v15.0
- clh: return error if apiSocketPath failed
- runtime: fix dropped error
- agent: Update seccomp configuration for errnoRet and flags
- Fix the issue that sandbox size is not right after update
- docs: Document limitation regarding subpaths
- qemu: kill virtiofsd if failure to start VMM
- runtime/virtcontainers: Fix typo on qmp error msg
- cli: delete not used files
- runtime: delete not used function parameter builtIn
- add io.katacontainers.config.hypervisor.virtio_fs_extra_args handling
- Entropy source annotation
- runtime: Fix stdout/stderr output from container being truncated
- fix the issue of missing set fsGroup for EphemeralStorage
- qemu: Fix assertion failure on shutdown
- Assorted clippy fixes for Rust agent
- agent: use channel instead of pipe(2) to send exit signal of process
- Improve agent shutdown handling
- Enable virtio-fs on s390x
- block: Generate PCI path for virtio-blk devices on clh
- runtime: Disable trace for healthcheck
- agent/rustjail: Fix accidental damage from tokio conversion
- cli: Use genericGetExpectedHostDetails on s390x
- runtime/tests: Change "moo FAILURE" message
- Update the information about the release process
- remove ProcessListContainer API
2047f26f kata-deploy: Adapt CRI-O config to use drop-in files
8de2f914 kata-deploy: Rely on CRIO default's values for manage_ns_lifecycle
ea9936e0 versions: Bump runc to v1.0.0-rc93
9c333b2c versions: Bump CRI-O version to 1.21.x
e33f207b versions: Bump critools version to 1.21.0
8e5df723 versions: Bump kubernetes version to 1.21.0
d15f84c9 versions: Remove Docker entry
516f4ec0 versions: Remove OpenShift entry
be101ac1 versions: Remove CRI-O meta dependencies
1ca6bedf versions: Upgrade to cloud-hypervisor v15.0
906c0df4 kata-deploy: don't update worker pool nodes
3ee61776 virtcontainers: Enable virtio-fs on s390x
8385ff95 runtime: Re-vendor GoVMM
adba4532 virtcontainers: Revert "virtcontainers: Allow s390x appendVhostUserDevice"
ede078bc kata-deploy: aks-test: bump kubernetes/containerd
484af12b kata-deploy: update to handle new runtimeclass path
05c224c3 runtimeclass: add nodeSelector
ee7de8ab tools: fix build kernel shell error
7d5a4252 docs: Document limitation regarding subpaths
36776408 runtime/virtcontainers: Fix typo on qmp error msg
12a65d23 runtimeclass: drop stale runtimeclass definitions
0787ea80 cgroupsCreate: not set resources to c.config.Resources
831224aa Sandbox: Fix ContainerConfig ptr in CreateContainer and createContainers
a57c8ab1 qemu: kill virtiofsd if failure to start VMM
ff2b9e54 cli: delete not used files
0d0a520d clh: return error if apiSocketPath failed
fc6bb01a runtime: fix dropped error
30ff6ee8 runtime: handle io.katacontainers.config.hypervisor.virtio_fs_extra_args
677f0d99 runtime: delete not used function parameter builtIn
dcb9f403 config: Protect annotation for entropy_source
f4c26aad agent: fix the issue of missing set fsGroup for EphemeralStorage
628d55bf kata-agent: fix the issue of fsGroup missing
0405beb2 agent: Remove unused Default implementation for NamespaceType
7b83b7ec agent/uevent: Better initialize Uevent in test
b0190a40 agent: Use vec![] macro rather than init-then-push
1c43245e agent/device: Remove unneeded Result<> wrappers from uev matchers
e41cdb8b agent: Use str::is_empty() method in config::get_string_value()
2377c097 agent: Use CamelCase for NamespaceType values
75eca6d5 agent/rustjail: Clean up error path in execute_hook()s async task
6ce1e56d agent/rustjail: Remove an unnecessary PathBuf
3c4485ec agent/rustjail: Clean up some static definitions with vec! macro
eaec5a6c agent/oci: Change name case to make clippy happy
3f5fdae0 agent/rustjail: (trivial) Clean up comment on process_grpc_to_oci()
210f39a4 agent/rustjail: Simplify renaming imports
d4a54137 runtime: Fix stdout/stderr output from container being truncated
8ecf8e5c agent: use channel instead of pipe to send exit signal of process
81c5ff12 agent: Update seccomp configuration for errnoRet and flags
8a33bd4c qemu: Fix assertion failure on shutdown
7f609113 virtcontainers: Allow s390x appendVhostUserDevice
67ac4f45 runtime: update GoVMM for memory backend support
6577b01a agent/rustjail: Fix accidental damage from tokio conversion
de2631e7 utils: Make WaitLocalProcess safer
9256e590 shutdown: Don't sever console watcher too early
51ab8700 utils: Improve WaitLocalProcess
507ef636 utils: Add waitLocalProcess function
1d5098de agent/block: Generate PCI path for virtio-blk devices on clh
e7c97f0f runtime/tests: Change "moo FAILURE" message
8bc53498 docs: Simplify the repo bumping section
8a47b05a docs: Mention that an app token should be used with hub
d434c2e9 docs: OBS account is not require anymore
543f9da3 runtime: Disable trace for healthcheck
421439c6 API: remove ProcessListContainer/ListProcesses
1366f0fb cli: Use genericGetExpectedHostDetails on s390x
Signed-off-by: Fabiano Fidêncio <fidencio@redhat.com>
By using drop-in file it simplifies the deployment and maintenance of
the CRI-O configurations by a lot, and all versions of CRI-O that should
be used together with the currently supported versions of kubenertes
support the drop-in configuration file.
Depends-on: github.com/kata-containers/kata-containers#1689
Fixes#1781
Signed-off-by: Fabiano Fidêncio <fidencio@redhat.com>
manage_ns_lifecycle (previously known as manage_network_ns_lifecycle)
has its default value as `true` for all CRI-O versions that should be
used with the kubernetes versions that are still supported / didn't
reach their EOL.
Signed-off-by: Fabiano Fidêncio <fidencio@redhat.com>
Our cluster's life is shorter than time it takes to update nodes; for
better stability of the kata-deploy test, let's not update the nodes.
Signed-off-by: Eric Ernst <eric_ernst@apple.com>
To ensure we run on nodes which have Kata installed, let's add the
nodeSelector to the runtimeclass definition, and have it match the label
that we applied during installation of the kata artifacts.
Signed-off-by: Eric Ernst <eric_ernst@apple.com>
Build kernel shell setup with -f, don't find patches directory path,
because patches_path is none, so fix this error.
Fixes: #1768
Signed-off-by: zyt312074545 <zyt312074545@hotmail.com>
- 1.13/1.14 are very old now; let's drop
- move from k8s-1.18 to just runtimeclasses directoy
- update docs to reflect the new reality
Fixes: #1425
Signed-off-by: Eric Ernst <eric_ernst@apple.com>
Occassional coredumps and OOMs observed on shutdown path due to improper
BH handling during aio cleanup in QEMU. Thankfully this has been fixed
in upstream already -- let's carry this patch.
Fixes: #1717
Signed-off-by: Eric Ernst <eric_ernst@apple.com>
- release: Do not git add kata-{deploy,cleanup}.yaml for the tests repo
- kata-deploy: add runtimeclass that includes pod overhead
- release: automatically bump the version of the kata-deploy images
- Refine uevent matching conditions
- docs: update dev-guide to include fixes from 1.x
- virtcontainers: replace newStore by store in Sandbox struct
- agent: log the mount point if it is already mounted
- tools/agent-ctl: Update Cargo.lock
- agent: Rework the debug console
- oci: Update seccomp configuration
- kernel: update experimental kernel to 5.10.x
- kata-deploy: Fix `test-kata.sh` and do some small cleanups / improvements in the kata-deploy script
- github: Fix slash-command-action usage
- rustjail: fix the issue of missing default home env
- Make uevent watching mechanism more flexible
- ci/openshift-ci: Prepare to build on CentOS 8
- docs: update configuration for passing annotations in conatinerd
- Revert "github: Remove kata-deploy-test action"
- runtime: increase dial timeout
- qemu experimental: Move to latest tree on virtio-fs-dev (qemu 6.0 + DAX patches).
- github: Remove kata-deploy-test action
- agent: s390x statfs constants
- kernel: upgrade kernel to 5.10.x for arm64.
- Don't do anything in Pipestream::shutdown
- Fix fsgroup
- agent: Remove many "panic message is not string literal" warnings
- osbuilder: Update QAT Dockerfile with new QAT driver version
- osbuilder: update dockerfiles to utilize IMAGE_REGISTRY
- Only keep one VERSION file
- Dechat deruntime
- runtime: Format auto-generated client code for cloud-hypervisor API
- runtime: use concrete KataAgentConfig instead of interface type
- versions: Update cloud-hypervisor to release v0.14.1
- runtime: import runtime/v2/runc/options to decode request from Docker
- virtcontainers/fc: Upgrade Firecracker to v0.23.1
- docs: Remove ubuntu installation guide
- docs: Update snap install guide
- docs: update how-to-use-k8s-with-cri-containerd-and-kata.md
- Update install docs for Fedora and CentOS
- action: fix missing qemu tag
- Remove installation guides for SLE and openSUSE
- kernel: Enable OVERLAY_FS_{METACOPY,XINO_AUTO}
- versions: kernel 5.10.x
- virtcontainers: Fix missing contexts in s390x
- runtime: makefile allow override DAX value
11897248 release: Do not git add kata-{deploy,cleanup}.yaml for the tests repo
2b5f79d6 release: automatically bump the version of the kata-deploy images
8682d6b7 docs: update dev-guide to include fixes from 1.x
f444adb5 kata-cleanup: Explicitly add tag to the container image
12582c2f kata-deploy: add runtimeclass that includes pod overhead
d75fe956 virtcontainers: replace newStore by store in Sandbox struct
342eb765 tools/agent-ctl: Update Cargo.lock
24b0703f agent: fix test for the debug console
79033257 agent: async the debug console
8ea2ce9a agent/device: Remove legacy uevent matching
5d007743 agent/device: Refine uevent matching for pmem devices
9017e110 agent: start to rework the debug console
a59e07c1 agent/define: Refine uevent matching for virtio-scsi devices
484a3647 agent/device: Rework uevent handling for virtio-blk devices
7873b7a1 github: Fix slash-command-action usage
eda8da1e github: Revert "github: Remove kata-deploy-test action"
a938d903 rustjail: fix the issue of missing default home env
b0e4618e docs: update configuration for passing annotations in conatinerd
d43098ec kata-deploy: Adapt regex for testing kata-deploy
107ceca6 kernel: update experimental kernel to 5.10.x
ca4dccf9 release: Get rid of "master"
c2197cbf release: Use sudo to install hub
49eec920 agent: log the tag and mount point if it is already mounted
16f732fc ci/lib: Use git to clone the tests repository
9281e567 ci/openshift-ci: Add build root dockerfile
1cce9300 github: Remove kata-deploy-test action
0828f9ba agent/uevent: Introduce wait_for_uevent() helper
16ed55e4 agent/device: Use consistent matching for past and future uevents
4b16681d agent/uevent: Put matcher object rather than "device address" in watch list
b8b32248 agent/uevent: Consolidate event matching logic
d2caff6c agent: Re-organize uevent processing
55ed2ddd agent: Store uevent watchers in Vec rather than HashMap
91e0ef5c agent/uevent: Report whole Uevents to device watchers
36420054 agent: Store whole Uevent in map, rather than just /dev name
06162025 agent/device: Move GLOBAL_DEVICE_WATCHER into Sandbox
11ae32e3 agent/device: Fix path matching for PCI devices
4f608804 agent/device: Update test_get_device_name()
ee6a590d agent: add test test_pipestream_shutdown
4a2d4370 agent: don't do anything in Pipestream::shutdown
e3e670c5 agent/device: Forward port test for get_device_name() from Kata 1.x
ed08980f agent: Remove many "panic message is not string literal" warnings
f365bdb7 versions: qemu-experimental: 6.0~rc 470dd6
6491b9d7 qemu: Add support to build static qemu for dev tree
13653e7b runtime: increase dial timeout
935460e5 osbuilder: update dockerfiles to utilize IMAGE_REGISTRY
010d57f4 osbuilder: Update QAT Dockerfile with new QAT driver version
adb866ad kata-deploy: Adapt to the correct tag name
60adc7f0 VERSION: Use the correct form
a4c125a8 trace: move gRPC requests from debug to trace
50fff977 trace: move trace span chatter to trace rather than info
28bd8c11 kernel: upgrade kernel to 5.10.x for arm64.
6fe48329 runtime: use concrete KataAgentConfig instead of interface type
64939425 mount: fix the issue of missing set fsGroup
88e58a4f agent: fix the issue of missing pass fsGroup
572aff53 build: Only keep one VERSION file
0c38d9ec runtime: Fix the format of the client code of cloud-hypervisor APIs
52cacf88 runtime: Format auto-generated client code for cloud-hypervisor API
84b62dc3 versions: Update cloud-hypervisor to release v0.14.1
4a38ff41 docs: Update snap install guide
ede1ab86 docs: Remove ubuntu installation guide
6255cc19 virtcontainers/fc: Upgrade Firecracker to v0.23.1
2c47277c docs: update how-to-use-k8s-with-cri-containerd-and-kata.md
317f55f8 docs: Update minimum version for Fedora
1ce29fc9 docs: Update CentOS install docs
3f90561b docs: Update Fedora install docs
8a1c6c3f action: fix missing qemu tag
a9ff9c87 docs: Remove openSUSE installation guide
2888ceb0 docs: Remove SLE installation guide
09d454ac runtime: import runtime/v2/runc/options to decode request from Docker
0b502d15 runtime: makefile allow override DAX value
a65519b9 versions: keep using kernel 5.4.x for ARM
31ced01e virtcontainers: Fix missing contexts in s390x
52a276fb agent: Fix type for PROC_SUPER_MAGIC on s390x
5b7c8b7d agent: Update cgroups-rs to 0.2.5
c035cdb3 versions: kernel 5.10.x
660b0473 oci: Update seccomp configuration
8c1e0d30 kernel: Enable OVERLAY_FS_{METACOPY,XINO_AUTO}
Signed-off-by: Fabiano Fidêncio <fidencio@redhat.com>
Let's teach `update-repository-version.sh` to automatically bump the
version of the kata-deploy images to be used within that release, when
running against the `kata-containers` repo.
Fixes: #1665
Signed-off-by: Fabiano Fidêncio <fidencio@redhat.com>
While performing a `make` in the top directory of the project, I've
noticed that agent-ctl's Cargo.lock file was not up-to-date.
Fixes: #1655
Signed-off-by: Fabiano Fidêncio <fidencio@redhat.com>
On commit 60f6315 we've started adding the specific version of the image
to be used, in order to ensure people using our content from a tarball
would be relying on the correct image.
However, later on, @bergwolf figured out it had some undesired side
effects, such as
https://github.com/kata-containers/kata-containers/runs/2235812941?check_suite_focus=true
What happens there is that the regular expression used to point the
image to a testing one doesn't take into consideration the $VERSION, and
that breaks the deployment.
Depends-on: github.com/kata-containers/kata-containers#1641
Fixes: #1632
Signed-off-by: Fabiano Fidêncio <fidencio@redhat.com>
Relevant changes for experimental :
42d3e2d04 virtiofs: calculate number of scatter-gather elements accurately
413daa1a3 fuse: connection remove fix
bf109c640 fuse: implement crossmounts
1866d779d fuse: Allow fuse_fill_super_common() for submounts
fcee216be fuse: split fuse_mount off of fuse_conn
8f622e949 fuse: drop fuse_conn parameter where possible
24754db27 fuse: store fuse_conn in fuse_req
c6ff213fe fuse: add submount support to <uapi/linux/fuse.h>
d78092e49 fuse: fix page dereference after free
9a752d18c virtiofs: add logic to free up a memory range
d0cfb9dcb virtiofs: maintain a list of busy elements
6ae330cad virtiofs: serialize truncate/punch_hole and dax fault path
9483e7d58 virtiofs: define dax address space operations
2a9a609a0 virtiofs: add DAX mmap support
c2d0ad00d virtiofs: implement dax read/write operations
ceec02d43 virtiofs: introduce setupmapping/removemapping commands
fd1a1dc6f virtiofs: implement FUSE_INIT map_alignment field
45f2348ec virtiofs: keep a list of free dax memory ranges
1dd539577 virtiofs: add a mount option to enable dax
22f3787e9 virtiofs: set up virtio_fs dax_device
f4fd4ae35 virtiofs: get rid of no_mount_options
b43b7e81e virtiofs: provide a helper function for virtqueue initialization
Fixes: #1639
Signed-off-by: Carlos Venegas <jos.c.venegas.munoz@intel.com>
This doesn't make much difference for the automated process we have in
place, but makes a whole lot of difference for those trying to have the
binaries deployed locally.
Signed-off-by: Fabiano Fidêncio <fidencio@redhat.com>
Move to next 6.0 dev tree for qemu experimental,
the qemu version is the same base as:
https://gitlab.com/virtio-fs/qemu/-/commits/virtio-fs-dev/
Using qemu 6.0-rc1 some patches does not apply.
Fixes: #1624
Signed-off-by: Carlos Venegas <jos.c.venegas.munoz@intel.com>
Update static build scripts to allow build qemu dev tree.
When qemu starts the process for a new version the patch number
from the qemu version is more than 50. Add logic to detect it
and not apply patches fro the base branch.
For example:
Qemu 5.2.50 means the beginning for 6.0 development. After detect a
development version, patches for 5.2.x will not be applied.
Signed-off-by: Carlos Venegas <jos.c.venegas.munoz@intel.com>
While we introduced IMAGE_REGISTRY, we didn't actually update the
corresponding Dockerfiles to utilize it. Let's add
Fixes: #1622
Signed-off-by: Eric Ernst <eric.g.ernst@gmail.com>
This fixes the QAT driver version and provides a check early in the
building process to make sure the driver exists. It also provides
hints to users on how to fix themselves if the driver changes again.
Fixes: #1618
Signed-off-by: Eric Adams <eric.adams@intel.com>
In kernel 5.10.x on arm64 side, When CONFIG_RANDOM_BASE is enabled,
physical base address can be a negative number. It may lead to bug
when a PA is taken as a unsigned number in comparison, as PA is
calculated based on the physical base address. The bug has been fixed
latest code by commit ee7febce051945be2 in memory hotplug zone. We can
eliminate the bug in an easy way by casting the PA as a signed value in
the current code base to avoid lots of backport.
Depends-on: github.com/kata-containers/tests#3388
Fixes: #1596
Signed-off-by: Jianyong Wu <jianyong.wu@arm.com>
Instead of having different VERSION files spread accross the project,
let's always use the one in the topsrcdir and remove all the others,
keeping only a synlink to the topsrcdir one.
Fixes: #1579
Signed-off-by: Fabiano Fidêncio <fidencio@redhat.com>
Return a guard variable from `create_logger()` which the caller can
implicitly drop to guarantee that all threads started by the async log
drain are stopped.
This fixes a long-standing bug [1] whereby the agent could panic with
the following error, generated by the `slog` logging crate:
```
slog::Fuse Drain: Custom { kind: Other, error: "serde serialization error: Bad file descriptor (os error 9)" }
```
[1] - See https://github.com/kata-containers/kata-containers/issues/171.
Signed-off-by: James O. D. Hunt <james.o.hunt@intel.com>
Linux 5.10.x is the new LTS branch, move
kata to a more recent kernel branch.
Fixes: #1288
Signed-off-by: Carlos Venegas <jos.c.venegas.munoz@intel.com>
Split qemu script to build qemu experimental using
same dockerfile.
Fixes: #1421
Depends-on: github.com/kata-containers/tests#3255
Signed-off-by: Carlos Venegas <jos.c.venegas.munoz@intel.com>
Let's ensure we use the appropriate tag for the release, even before it
was actually created.
Fixes: #1493
Signed-off-by: Fabiano Fidêncio <fidencio@redhat.com>
Add arguments and files as needed, if only of them
changes the build will start from the change and
not from scratch.
Signed-off-by: Carlos Venegas <jos.c.venegas.munoz@intel.com>
Add docker ARG to provide a date to invalid cache, if the date changes
the image will be rebuild. This is required to keep build dependencies
with security fixes, but still take advantage of build qemu faster using
docker cache.
Signed-off-by: Carlos Venegas <jos.c.venegas.munoz@intel.com>
Today we apply patches per base branch. Having
two qemu versions in a similar base version can make
can have problems if one of the trees already has a patch.
If a patch is needed only for one specific tag/commit
add only the patch to that version.
Signed-off-by: Carlos Venegas <jos.c.venegas.munoz@intel.com>
When kata used multiple repositories, versions file was
downloaded. This is not needed anymore as the file is part
of the same repository.
Signed-off-by: Carlos Venegas <jos.c.venegas.munoz@intel.com>
Fail if not patches directory is found. Help to prevent
build a new qemu version with missing patches.
Signed-off-by: Carlos Venegas <jos.c.venegas.munoz@intel.com>
Some patches has conflicts with old experimental kernel. Move patches to its own specific version.
Signed-off-by: Carlos Venegas <jos.c.venegas.munoz@intel.com>
Currently the the configure-hypervisor.sh doesn't set any optimization flag when
compiling QEMU >= 5.2.0 since the configure script will implicitly set -O2 on Ubuntu. But
on other environments, for example CentOS 7, it won't be set any optimization and this
results on the compiler warn:
# warning _FORTIFY_SOURCE requires compiling with optimization (-O)
To avoid this inconsistent behavior across different build environments, let's explicitly
set the -O2 flag.
Reported-by: Eric Ernst <eric.g.ernst@gmail.com>
Signed-off-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Remove unused function parameters from the following types:
- `AgentCmdFp`: Removed the config parameter and made
the context parameter the first (à la golang).
- `BuiltinCmdFp`: Removed the config and options parameters.
Signed-off-by: James O. D. Hunt <james.o.hunt@intel.com>
The recent switch to an async rust agent broke the `agent-ctl` tool.
However, we didn't notice because that isn't being built by the CI.
Fix the breakage by passing a ttRPC context to all ttRPC API calls and
also build the tool as part of the static checks CI.
Fixes: #1471.
Signed-off-by: James O. D. Hunt <james.o.hunt@intel.com>
Currently, musl toolchain installation on arm64 is just downloading from
a website. It's unsafe in case the website corrupts. So build musl
toolchain from source if it can't be downloaded.
Fixes: #1481
Signed-off-by: Jianyong Wu <jianyong.wu@arm.com>
Update the Intel QAT Dockerfile to work with the 2.0 repos, fix some
bugs with building Debian/Ubuntu rootfs, and update the latest QAT
driver. Updated copyright.
Fixes: #1419
Signed-off-by: Adams, Eric <eric.adams@intel.com>
QEMU 5.2.0 needs ninja-build package installed on the build environment.
The default-configs were copied to $QEMU_SRC/default-configs but that does
take any effect, so instead it is now copied to $QEMU_SRC/default-configs/devices
and the configs for i386 were updated.
Also it had to change some arguments being passed to configure as Meson was failing
due inconsistent paths:
./meson.build:1:0: ERROR: The value of the 'libdir' option is '/usr/lib/qemu' which must be a subdir of the prefix '/snap/kata-containers/current/usr'.
Note that if you pass a relative path, it is assumed to be a subdir of prefix.
Signed-off-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
This change the version of QEMU used in the tests and CI.
The scripts/configure-hypervisor.sh was changed so that:
- Passing the `--enable-virtiofsd` flag
- Do not compiling with -O3 to avoid the warning:
Program python3 found: YES (/usr/bin/python3)
../meson.build:104: WARNING: Consider using the built-in optimization level instead of using "-O3".
../meson.build:108: WARNING: Consider using the built-in optimization level instead of using "-O3".
The qemu.blacklist files was changed so that new and uneeded firmware files are removed from the
final tarball. Except for qboot.rom which is new but kept, since it can be used with microvm
machine type (in case we want to enable microvm in the future).
The patches which are applied on QEMU sources:
- 0001-virtiofsd-Allow-to-build-it-without-the-tools.patch
(Build fix for Meson - allows passing `--disable-tools --enable-virtiofsd`)
- 0002-virtiofsd-extract-lo_do_open-from-lo_open.patch
0003-virtiofsd-optionally-return-inode-pointer-from-lo_do.patch
0004-virtiofsd-prevent-opening-of-special-files-CVE-2020-.patch
0005-virtiofsd-Add-_llseek-to-the-seccomp-whitelist.patch
0006-virtiofsd-Add-restart_syscall-to-the-seccomp-whiteli.patch
(Security fixes for virtiofsd)
- 0007-9p-removing-coroutines-of-9p-to-increase-the-I-O-per.patch
(Performance improvement for 9p driver)
- 0008-hw-s390x-fix-build-for-virtio-9p-ccw.patch
(Build fix for virtio-9p-ccw machine type)
Fixes: #1238
Signed-off-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
The scripts/configure-hypervisor.sh split the QEMU and GCC version
in major and minor versions then use those values on shell conditionals
to compare versions. This is error prone, so instead this change the script
to use the `sort -V -C ` command for version comparisons.
Fixes: #1349
Signed-off-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
There's no runtime repo anymore, let's avoid making a reference to it,
which may end up confusing people reading the Release-Process file.
Signed-off-by: Fabiano Fidêncio <fidencio@redhat.com>
All the work done on this file, apart from merging the 2.x repo, and now
removing unused lines, comes from Intel.
The reason it's being added is to silent a complaint from the static
checker.
Signed-off-by: Fabiano Fidêncio <fidencio@redhat.com>
There's no more NEMU, for some time already. Considering this, let's
just remove any mention to it as part of our project.
Signed-off-by: Fabiano Fidêncio <fidencio@redhat.com>
There's no reason to ship qemu & qemu-virtiofs when the former already
includes vitiofs support (and that's the default for 2.x deployments).
In case we will enable experimental qemu DAX support, we should add a
new target, a "qemu-experimental" target, as Carlos has been working on.
Fixes: #1424
Signed-off-by: Fabiano Fidêncio <fidencio@redhat.com>
The docker script has been removed as part of
62cbaf4de4, but references to it were left
behind in the artifact-list.sh, release/kata-deploy-binaries.sh, and
kata-deploy/Dockerfile.
Signed-off-by: Fabiano Fidêncio <fidencio@redhat.com>
For Kata Containers 2.x, CRI-O should always be using the
`containerd-shim-kata-v2` binary, and always be configured to use the
"vm" runtime type, developed specifically for the shimv2, instead of the
default "oci" runtime type.
I've taken the liberty to try to simplify the CRI-O script and make it
less error prone. In the future, we can start dropping a configuration
file to /etc/crio/crio.conf.d and just removing it as part of the
cleanup, but that's for the future.
Fixes: #1357
Signed-off-by: Fabiano Fidêncio <fidencio@redhat.com>
Factoring those pieces of code to their own functions allows us to
easily re-use them when creating & cleaning up the CRI-O configuration
files, as CRI-O is also affected by the issues that are still opened.
Signed-off-by: Fabiano Fidêncio <fidencio@redhat.com>
Our list was based on what we used to ship for Kata Containers 1.x, not
even taking into account the shimv2 binary.
Let's update it in order to reflect better what we currently distribute.
Signed-off-by: Fabiano Fidêncio <fidencio@redhat.com>
Update the Intel QAT Dockerfile to work with the 2.0 repos, fix some
bugs with building Debian/Ubuntu rootfs, and update the latest QAT
driver. Updated copyright.
Fixes: #1419
Signed-off-by: Adams, Eric <eric.adams@intel.com>
For building rootfs with docker, glibc based rust target should be installed on ppc64le.
Additionally, protobuf-compiler would be required on ppc64le as it is not present by default.
Fixes: #1417
Signed-off-by: Amulya Meka <amulmek1@in.ibm.com>
Give the user chance to specify their own registry in event the default
provided are not accessible, desirable.
Fixes: #1393
Signed-off-by: Eric Ernst <eric.g.ernst@gmail.com>
Update all tools/packaging scripts to prefer the new options over the
old ones (e.g. `--config` instead of `--kata-config`).
Signed-off-by: Daniel Knittl-Frank <knittl89+git@googlemail.com>
* CONFIG_OVERLAY_FS_METACOPY is needed to have reasonable performance
for chmod and similar calls;
* CONFIG_OVERLAY_FS_XINO_AUTO is recommended for POSIX compliance.
Fixes: #1075
Signed-off-by: Fabiano Fidêncio <fidencio@redhat.com>
- Install the required protobuf-compiler on Ubuntu
- Install correct libc Rust target (glibc on s390x)
- Do not skip Rust installation on s390x
Fixes: #1266
Signed-off-by: Jakob Naucke <jakob.naucke@ibm.com>
This directory has been automatically removed as there's no files inside
it, as part of d3c9862059
Let's improve the logic in the scripts to avoid failing in case the
"experimental" dir is not present.
Fixes: #1328
Signed-off-by: Fabiano Fidêncio <fidencio@redhat.com>
Installing the built uncompressed vmlinux kernel will not work on s390x,
QEMU will complain:
Linux kernel boot failure: An attempt to boot a vmlinux ELF image
failed.
This image does not contain all parts necessary for starting up. Use
bzImage or arch/s390/boot/compressed/vmlinux instead.
Hence, use that kernel image on s390x.
Fixes: #1264
Signed-off-by: Jakob-Naucke <jakob.naucke@ibm.com>
Kata Containers 2.x is not supported outside of the kubernetes world.
With this in mind, let's remove leftovers from the 1.x deployments &
documentation.
Fixes: #1356
Signed-off-by: Fabiano Fidêncio <fidencio@redhat.com>
Since there is no Rust target for musl on s390x, builds on s390x should use
glibc. This commit removes the "Cannot build Rust agent on s390x" restriction
in rootfs.sh and only installs musl in the build environment when it is
required.
Fixes: #1262
Signed-off-by: Jakob Naucke <jakob.naucke@ibm.com>
acpi is enabled for kata 1.x, port and rebase code for 2.x
including:
runtime: enable pflash;
agent: add acpi support for pci bus path;
packaging: enable CONFIG_RTC_DRV_EFI;
Fixes: #1317
Signed-off-by: Jianyong Wu <jianyong.wu@arm.com>
Include on the terms glossary some words about the agent init as
later on README its explain how the agent can be switched between
systemd and init.
Signed-off-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Changed the user-visible urls to point to the right Kata Containers
files/repositories.
Fixes#234
Signed-off-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
To avoid hitting quota limit on docker.io, this changes the Fedora
and CentOS dockerfiles to pull the image from the projects registries.
Fixes#1324
Signed-off-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
The osbuilder scripts include a bunch of code for installing cmake, even
though cmake is never invoked. versions.yaml claims it's needed to build
grpc-rs, but that doesn't appear to be in our dependency graph.
Presumably, we used to need this, but don't any more. So, remove all cmake
references.
Fixes#1309
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This is not needed for Fedora, RHEL, and CentOS, but it is required when
using any other host OS. Having --security-opt apparmor=unconfined used
unconditionally is a no go as it'd break podman.
The reason this was only added when building for SUSE (as target distro)
was because debian and ubuntu condition would fall-through the switch to
the suse case (which makes me think that the fall-through was not
accidental).
Signed-off-by: Fabiano Fidêncio <fidencio@redhat.com>
Falling through the switch cases in docker_extra_args() looks like a
typo and causes issues when building with podman, as `--security-opt
apparmor=unconfinded" shouldn't be passed if Apparmor is no enable on
the system.
Fixes: #1241
Signed-off-by: Fabiano Fidêncio <fidencio@redhat.com>
Run static checks prior to building the agent.Checks
fail if run after since the compilation process
produces new rust code.
Signed-off-by: Archana Shinde <archana.m.shinde@intel.com>
Improve Kata Containers memory footprint by reducing debian
image size.
Without this change:
Debian image -> 256MB
With this change:
Debian image -> 128MB
Note: this change *will not* impact ubuntu image.
fixes#1188
Signed-off-by: Julio Montes <julio.montes@intel.com>
It is used a temporary container to pull the QEMU tarball out
of the build image, but this container is never deleted. This
will ensure it gets deleted after its execution.
Fixes#1168
Signed-off-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Currently QEMU is built inside the container, its tarball pulled to
the host, files removed then packaged again. Instead, let's run all
those steps inside the container and the resulting tarball will
be the final version. For that end, it is introduced the
qemu-build-post.sh script which will remove the uneeded files and
create the tarball.
The patterns for directories on qemu.blacklist had to be changed
to work properly with `find -path`.
Fixes#1168
Signed-off-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
The dockerfiles used to build qemu and qemu-virtiofs have the QEMU destination
path hardcoded, which in turn is also on the build scripts. This refactor
the dockerfiles to add the QEMU_DESTDIR argument, which value is passed by the scripts.
Fixes#1168
Signed-off-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Define `before_starting_container` and `after_stopping_container`
functions, these functions run before and after the container that
builds the rootfs respectively.
Signed-off-by: Julio Montes <julio.montes@intel.com>
- add a reference Dockerfile to tools
- update kata-monitor build to:
1) utilize the kata buildflags, which were dropped before
2) disable CGO, so we have option for building in alpine
From root of the repository, example build:
$ docker build -f tools/packaging/kata-monitor/Dockerfile -t kata-monitor .
Fixes: #1135
Signed-off-by: Eric Ernst <eric.g.ernst@gmail.com>
Otherwise `make install` run from the top directory would just fail as
the target is not defined.
Fixes: #1149
Signed-off-by: Fabiano Fidêncio <fidencio@redhat.com>
Calls apply-patches.sh in kernel/build-kernel.sh to apply the
kernel patches.
Fixes#1014
Signed-off-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Moved the qemu/apply_patches.sh to the common scripts directory and
refactor it so that it can be used as a generic and consistent way
to apply patches.
Fixes#1014
Signed-off-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Changed apply_patches.sh script so that patches are sorted before
they be applied.
Fixes#1014
Signed-off-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
For experimental-virtiofs, we use it to test virtiofs with DAX. Let's
rename its virtiofsd to virtiofsd-dax.
Depends-on: github.com/kata-containers/tests#2951
Signed-off-by: Peng Tao <bergwolf@hyper.sh>
Basic virtio-fs support has made it upstream in the Linux kernel, as
well as in QEMU and Cloud Hypervisor. Let's go ahead and add it to the
standard configuration.
Since the device driver / DAX handling is still in progress for
upstream, we will want to still build a seperate experimental kernel for
those who are comfortable trading off bleeding edge stability/kernel
updates for improved FIO numbers.
Fixes: #963
Signed-off-by: Eric Ernst <eric.g.ernst@gmail.com>
Added new `agent-ctl` commands to allow the following agent API calls to
be made:
- `AddARPNeighborsRequest`
- `CloseStdinRequest`
- `CopyFileRequest`
- `GetMetricsRequest`
- `GetOOMEventRequest`
- `MemHotplugByProbeRequest`
- `OnlineCPUMemRequest`
- `ReadStreamRequest`
- `ReseedRandomDevRequest`
- `SetGuestDateTimeRequest`
- `TtyWinResizeRequest`
- `UpdateContainerRequest`
- `WriteStreamRequest`
Fixes: #969.
Signed-off-by: James O. D. Hunt <james.o.hunt@intel.com>
Vivek Goyal found out that using "shared" thread pool, instead of
"exclusive" results in better performance.
Knowning that and with the plan to have virtio-fs as the default fs for
the 2.0, let's bring this patch in for both 5.0 and 5.1.
Fixes: #944
Signed-off-by: Fabiano Fidêncio <fidencio@redhat.com>
Update the build kata containers kernel document for 2.0 release. Fixed
the 1.x release project paths and urls, using the kata-containers
project file paths and urls.
Fixes: #929
Signed-off-by: Ychau Wang <wangyongchao.bj@inspur.com>
Qemu v5.1 was released with an affending commit 9b3a35ec82
(virtio: verify that legacy support is not accidentally on).
As a result, it breaks commandline compatiblilities for old qemu
users. Upstream qemu has fixed it but no release has been put out yet.
Let's apply these fixes by hand for now.
Refs: https://www.mail-archive.com/qemu-devel@nongnu.org/msg729556.html
Depends-on: github.com/kata-containers/tests#2945
Signed-off-by: Peng Tao <bergwolf@hyper.sh>
Simply running `make` would generate some cargo lock updates for
agent-ctl. Let's include them so that we have fixed dependencies.
Fixes: #883
Signed-off-by: Peng Tao <bergwolf@hyper.sh>
When building with AGENT_SOURCE_BIN pointing to an already built
kata-agent binary, the target directory needs to be created in the
rootfs tree.
Fixes#873
Signed-off-by: Ralf Haferkamp <rhafer@suse.com>
There were a couple of issues with the build-scripts discovered while
doing release:
- Relative paths are error prone. Fix error.
- short_commit_length is used to truncate sha for commits when
appending agent version to resulting files. Before this was
in pkglib.sh, which is otherwise an unused file from when we
supported OBS. Add this define to lib.sh, which is sourced by
the applicable packaging scripts.
There's plenty of room for improvement, but these fixes make the
existing scripts functional again.
Fixes: #871
Signed-off-by: Eric Ernst <eric.g.ernst@gmail.com>
This reverts commit c0ea910273.
Two scripts are still required for release and testing, which should
have never been under obs-packaging dir in the first place. Let's
revert, move the scripts / update references to it, and then we can
remove the remaining obs-packaging/ tooling.
Signed-off-by: Eric Ernst <eric.g.ernst@gmail.com>
Now, the qemu version used in arm is so old. As some new features have merged
in current qemu, so it's time to upgrade it. As obs-packaging has been removed,
I put the qemu patch under qemu/patch/5.1.x.
As vxfs has been Deprecated in qemu-5.1, it will be no longer exist in
configuration-hyperversior.sh when qemu version larger than 5.0.
Fixes: #816
Signed-off-by: Edmond AK Dantes <edmond.dantes.ak47@outlook.com>
2.0 Packaging runtime-release-notes.sh script is using 1.x Packaging
kernel urls. Fix these urls to 2.0 branch Packaging urls.
Fixes: #829
Signed-off-by: Ychau Wang <wangyongchao.bj@inspur.com>
Somehow we are not running static checks for a long time.
And that ended up with a lot for errors.
* Ensure debug options are valid is dropped
* fix snap links
* drop extra CONTRIBUTING.md
* reference kata-pkgsync
* move CODEOWNERS to proper place
* remove extra CODE_OF_CONDUCT.md.
* fix spell checker error on Developer-Guide.md
Signed-off-by: Peng Tao <bergwolf@hyper.sh>
In static-build/qemu-virtiofs/Dockerfile the code which
applies the virtiofs specific patches is spread in several
RUN instructions. Refactor this code so that it runs in a
single RUN and produce a single overlay image.
Signed-off-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
The qemu and qemu-virtiofs Dockerfile files repeat the code to apply
patches based on QEMU stable branch being built. Instead, this adds
a common script (qemu/apply_patches.sh) and make it called by the
respective Dockerfile files.
Signed-off-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Fix a bug on qemu-virtiofs Dockerfile which end up not applying
the QEMU patches.
Fixes#786
Signed-off-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
This patch add fall-back code path that builds cloud-hypervisor static
binary from source, when the downloading of cloud-hypervisor binary is
failing. This is useful when we experience network issues, and also
useful for upgrading clh to non-released version.
Together with the changes in the tests repo
(https://github.com/kata-containers/tests/pull/2862), the Jenkins config
file is also updated with new Execute shell script for the clh CI in the
kata-containers repo. Those two changes fix the regression on clh CI
here. Please check details in the issue below.
Fixes: #781
Fixes: https://github.com/kata-containers/tests/issues/2858
Signed-off-by: Bo Chen <chen.bo@intel.com>
Use the relative path of kata-deploy to replace the 1.x packaging url in
the kata-deploy/README.md file. Fixed the path issue, producted by
creating new branch.
Fixes: #777
Signed-off-by: Ychau Wang <wangyongchao.bj@inspur.com>
Fix the kata-pkgsync tool's docs, change the download path of the
packaging tool in 2.0 release.
Fixes: #773
Signed-off-by: Ychau Wang <wangyongchao.bj@inspur.com>
We should just download the official static build binary instead of
trying to build on our own.
Fixes: #760
Signed-off-by: Peng Tao <bergwolf@hyper.sh>
The community has discussed and took the decision in favour of promoting
kata-deploy as the way of distributing and using kata for distros that
officially don't maintain the project.
Fixes: #623
Fixes: https://github.com/kata-containers/packaging/issues/1120
Signed-off-by: Fabiano Fidêncio <fidencio@redhat.com>
In order to use a build systemd like launchpad, the snapcraft.yaml file
must be in the root directory of the project or under the `snap`
directory, that way launchpad detects that this project can be build
using the `snapcraft` command
Signed-off-by: Julio Montes <julio.montes@intel.com>
These patches are causing compilation issues while building on x86.
Remove these while we fix the issue.
Signed-off-by: Archana Shinde <archana.m.shinde@intel.com>
Disable the following IPMI configs, since they are not needed
for kata containers and fixes the snap job in launchpad
CONFIG_PCI_IPMI_KCS
CONFIG_PCI_IPMI_BT
CONFIG_IPMI_SSIF
fixes#581
Signed-off-by: Julio Montes <julio.montes@intel.com>
Reimplement the loop that waits for OBS. Look for the packages
that are still building, not for the repos.
Signed-off-by: Julio Montes <julio.montes@intel.com>
Add the following packages as build dependencies to build QEMU
5 in OBS and launchpad (snap)
* libselinux1
* libffi
* libmount
* libblkid
* python3
fixes#1075
Signed-off-by: Julio Montes <julio.montes@intel.com>
Since we always build musl kata-agent, there is no need to build
it inside a musl container. We can just build on the host and then
copy the binary to the target rootfs.
There are still a lot to clean up and it should be made so for ALL
target distros instead of just alpine. But this is at least working
for alpine first.
Signed-off-by: Peng Tao <bergwolf@hyper.sh>
We do not need to clone packaging repository, nor apply
virtio_vsock as virtio-fs-dev has already included that fix.
Signed-off-by: Peng Tao <bergwolf@hyper.sh>
Anyone can collaborate in the Kata Containers project, so instead of
adding her/his name and email to the Cargo.toml files, use
`The Kata Containers community` as name and
`kata-dev@lists.katacontainers.io` as email.
fixes#643
Signed-off-by: Julio Montes <julio.montes@intel.com>
Rather than specifying the VSOCK address as two CLI options
(`--vsock-cid` and `--vsock-port`), allow the agent's ttRPC server
address to be specified to the `agent-ctl` tool using a single URI
`--server-address` CLI option. Since the ttrpc crate supports VSOCK and
UNIX schemes, this allows the tool to be run inside the VM by specifying
a UNIX address.
Fixes: #549.
Signed-off-by: James O. D. Hunt <james.o.hunt@intel.com>
Don't format the error string before passing to the `anyhow!()` macro
since it can format strings itself.
Signed-off-by: James O. D. Hunt <james.o.hunt@intel.com>
Add an ACRN runtime ('kata-acrn') to the Docker configuration
('/etc/docker/daemon.json').
Fixes: #579
Signed-off-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
In case of containerd, not all annotations are passed down to the OCI
layer. We need to configure "pod_annotations" field for a runtime class.
This field is a list of annotations that can be passed by Kata as OCI
annotations. Add this as default configuration with kata-deploy.
Fixes: #594
Signed-off-by: Archana Shinde <archana.m.shinde@intel.com>
For privieleged containers, all host devices are passed to
container. We have done work in crio and containerd to define a
scope of privileged in Kata to prevent this from happening.
Add this as the default as this falls under a best practice to follow
with Kata.
Note that if this flag has been already defined, then this change
does not override it.
Fixes#582
Signed-off-by: Archana Shinde <archana.m.shinde@intel.com>
Disable reflink when using DAX. Reflink is a xfs feature that cannot be
used together with DAX.
fixes kata-containers/osbuilder#456
fixes#577
Signed-off-by: Julio Montes <julio.montes@intel.com>
Add vfio-ap.conf to the s390 kernel config fragments, which includes
the necessary flags for passing an IBM Adjunct Processor (AP) device
over VFIO.
Fixes: #567
Signed-off-by: Jakob-Naucke <jakob.naucke@ibm.com>
Reviewed-by: alicefr <afrosi@redhat.com>
Moved CONFIG_GENERIC_MSI_IRQ_DOMAIN in arch base.conf.
The config is not selected for s390x
Signed-off-by: Alice Frosi <afrosi@de.ibm.com>
Signed-off-by: Jakob-Naucke <jakob.naucke@ibm.com>
Some kernel configs need additional dependencies:
- CONFIG_NO_HZ depends on
CONFIG_GENERIC_CLOCKEVENTS
- CONFIG_CGROUP_PERF depends on
CONFIG_PERF_EVENTS
CONFIG_HAVE_PERF_EVENTS
- CONFIG_BLK_DEV_LOOP depends on
CONFIG_BLK_DEV
CONFIG_BLOCK
Signed-off-by: Alice Frosi <afrosi@de.ibm.com>
Signed-off-by: Jakob-Naucke <jakob.naucke@ibm.com>
Moved CONFIG_ PARAVIRT to each arch base.conf.
CONFIG_ PARAVIRT only defined in x86, arm64, arm in arch/$arch/Kconfig.
Signed-off-by: Alice Frosi <afrosi@de.ibm.com>
Signed-off-by: Jakob-Naucke <jakob.naucke@ibm.com>
Moved CONFIG_NO_HZ_FULL config to each arch base.conf.
The config CONFIG_NO_HZ_FULL depends on CONFIG_HAVE_CONTEXT_TRACKING.
See https://github.com/torvalds/linux/blob/
a811c1fa0a02c062555b54651065899437bacdbe/kernel/time/Kconfig#L96
The context tracking is not supported on s390x yet.
See https://github.com/torvalds/linux/blob/
a811c1fa0a02c062555b54651065899437bacdbe/Documentation/features/time/
context-tracking/arch-support.txt#L27
Signed-off-by: Alice Frosi <afrosi@de.ibm.com>
Signed-off-by: Jakob-Naucke <jakob.naucke@ibm.com>
Moved:
---
CONFIG_HOTPLUG_PCI_ACPI=y
CONFIG_PNPACPI=y
---
from hotplug to acpi.
In this way, it is possible to skip these config if the acpi feature is
not supported.
Signed-off-by: Alice Frosi <afrosi@de.ibm.com>
Signed-off-by: Jakob-Naucke <jakob.naucke@ibm.com>
For certain kernel version CONFIG_PCI_MSI_IRQ_DOMAIN is only supported
on x86 and arm64.
See https://github.com/torvalds/linux/blob/
219d54332a09e8d8741c1e1982f5eae56099de85/drivers/pci/Kconfig#L55
Signed-off-by: Alice Frosi <afrosi@de.ibm.com>
Signed-off-by: Jakob-Naucke <jakob.naucke@ibm.com>
The option CONFIG_VIRTIO_PMEM is not supported on s390x.
It requires nvdimm support.
Signed-off-by: Alice Frosi <afrosi@de.ibm.com>
Signed-off-by: Jakob-Naucke <jakob.naucke@ibm.com>
The kernel config CONFIG_HAVE_NET_DSA is not supported on s390x.
See https://github.com/torvalds/linux/blob/master/net/dsa/Kconfig#L4.
Config moved to arch directory.
Signed-off-by: Alice Frosi <afrosi@de.ibm.com>
Signed-off-by: Jakob-Naucke <jakob.naucke@ibm.com>
Add !s390x tag to skip these group of fragments for s390x.
Signed-off-by: Alice Frosi <afrosi@de.ibm.com>
Signed-off-by: Jakob-Naucke <jakob.naucke@ibm.com>
[ Port from packaging commit 4e1b5729f47d5f67902e1344521bc5b121673046 ]
Build clh with Podman, allow build the vmm in the Podman CI
Virtiofs qemu has to be build as this is requried by clh.
Fixes: #461
Signed-off-by: Jose Carlos Venegas Munoz <jose.carlos.venegas.munoz@intel.com>
Signed-off-by: Bo Chen <chen.bo@intel.com>
[ Port from packaging commit cbe53bdb14e303830fa9f2d5a7f3c9161a32f033 ]
Update build scripts for qemu-virtiofs.
- virtiofs-0.3 patches are not needed
- Sync build on how vanilla qemu is built
- Apply patches for virtiofsd if any (none today)
- Apply patches that are used for the qemu vanilla
- Apply patches in order
Fixes: #461
Signed-off-by: Jose Carlos Venegas Munoz <jose.carlos.venegas.munoz@intel.com>
Signed-off-by: Bo Chen <chen.bo@intel.com>
Add usage instructions for -a option in script and README,
currently supported architecture are aarch64/ppc64le/s390x/x86_64.
Fixes: #534
Signed-off-by: zhanghj <zhanghj.lc@inspur.com>
This PR updates the versions for the virtiofs kernel branch and
as there is a tag based in kernel 5.6 move patches to uses the tag name.
This PR is needed to enable CLH CI for kata 2.0. This PR is backporting
kata-containers/runtime#2843 and kata-containers/packaging#1098.
Fixes#532
Signed-off-by: Gabriela Cervantes <gabriela.cervantes.tellez@intel.com>
For building rust agent on ppc64le, the rust toolchain is built using
the LIBC implementation - gnu instead of musl.
Fixes: #481
Signed-off-by: Amulya Meka <amulmek1@in.ibm.com>
Now, cloud-hypervisor is capable to work on arm64. it's time to
enable it in kata for arm64.
as cloud-hypervisor can only use virtio-fs, a new patch should be
applied to kernel for virtiofs and some config should be removed
temporarily.
Fixes: #446
Signed-off-by: Jianyong Wu <jianyong.wu@arm.com>
Don't modify /sbin/init on the build host when using command `AGENT_INIT="yes" ./rootfs.sh centos` to build rootfs.
Fixes: #430
Signed-off-by: liangxianlong <liang.xianlong@zte.com.cn>
Kata 2.0 lives in `github.com/kata-containers/kata-containers`, so all scripts
should point to it.
Currently the branch for Kata 2.0 is 2.0-dev not master, then the branch envar
must be used instead of hardcoding `master` as default branch.
Signed-off-by: Julio Montes <julio.montes@intel.com>
tools/osbuilder/scripts/lib.sh was making references to agent and
runtime repositories to get golang, rust, cmake and musl versions.
Since runtime and agent repos are consolidating, we only need to
make reference to our versions.yaml in this (kata-containers) repo.
Fixes: #234.
Signed-off-by: Salvador Fuentes <salvador.fuentes@intel.com>
- Removes `CODE_OF_CONDUCT.md` and `CONTRIBUTING.md` from osbuilder
directory.
- Fixes a reference from `image-builder/README.md` to
`rootfs-builder/README.md`
- Updates the main `README.md` making a reference to the local
`tools/osbuilder/README.md`
Signed-off-by: Salvador Fuentes <salvador.fuentes@intel.com>
move all osbuilder files into `tools` directory to be able
to merge this into kata-containers repo.
Signed-off-by: Salvador Fuentes <salvador.fuentes@intel.com>
