Let's make sure we'll also be testing k8s using CRI-O.
For now, we'll only be running the CRI-O test with QEMU. Once it
becomes stable we can expand this to other Hypervisors as well.
Fixes: #8005
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
(cherry picked from commit 03b82e8484)
This is based on official CRI-O documentations[0] and right now we're
making this specific to Ubuntu as that's what we have as runners.
We may want to expand this in the future, but we're good for now.
[0]:
https://github.com/cri-o/cri-o/blob/main/install.md#apt-based-operating-systems
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
(cherry picked from commit d7105cf7a4)
We'll need this in order to setup k0s with a different container engine.
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
(cherry picked from commit 54c0a471b1)
It should be garm-ubuntu-2004-smaller instead of garm-ubuntu-2004-small.
Fixes: #7890
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
(cherry picked from commit 3a2c83d69b)
Let's ensure we test kata-deploy on RKE2 and k0s as well.
Fixes: #7890
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
(cherry picked from commit f7fa7f602a)
This will be very useful in the near future, when we start testing
kata-deploy with rke2 as well.
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
(cherry picked from commit 2c908b598c)
This will be very useful in the near future, when we start testing
kata-deploy with k0s as well.
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
(cherry picked from commit eaf6164916)
We'll be using exactly the same code used for the k8s tests, which are
already deploying k3s on GARM.
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
(cherry picked from commit 0015257636)
We just need to make sure the correct overlay is applied, following what
we already have been doing for k3s.
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
(cherry picked from commit bf2cb02283)
We'll be testing kata-deploy with different kubernetes flavours as part
of our GARM tests, and this is a place-holder for this.
Once enabled, we'll do nothing, just `return 0`, so we can then properly
add the tests after this commit gets merged.
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
(cherry picked from commit b12b9e1886)
So we have a better control on which flavour of kubernetes kata-deploy
is expected to be targetting.
This was also done as part of fa62a4c01b,
for the k8s tests.
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
(cherry picked from commit 9e1fb8a966)
This will allow us to re-use the function in the kata-deploy tests,
which will come soon.
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
(cherry picked from commit 09cc0ed438)
Otherwise only the first test will be executed
Signed-off-by: Aurélien Bombo <abombo@microsoft.com>
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
(cherry picked from commit 486fe14c99)
Ideally we'd add the instance_type or the full K8S_TEST_HOST_TYPE but
that exceeds the maximum amount of characteres allowed for the cluster
name. With this in mind, let's use the first letter of
K8S_TEST_HOST_TYPE instead.
Signed-off-by: Aurélien Bombo <abombo@microsoft.com>
(cherry picked from commit d9ef1352af)
This makes it so that each AKS cluster is created in its own individual
resource group, rather than using the "kataCI" resource group for all
test clusters.
This is to accommodate a tool that we recently introduced in our Azure
subscription which automatically deletes resource groups after a set
amount of time, in order to keep spending under control.
The tool will automatically delete any resource group, unless it has a
tag SkipAutoDeleteTill = YYYY-MM-DD. When this tag is present, the
resource group will be retained until the specified date.
Note that I tagged all current resource groups in our subscription with
SkipAutoDeleteTill = 2043-01-01 so that we don't lose any existing
resources.
Fixes: #7982
Signed-off-by: Aurélien Bombo <abombo@microsoft.com>
(cherry picked from commit 68267a3996)
This PR adds the parallel bandwidth limit for qemu for kata metrics.
Signed-off-by: Gabriela Cervantes <gabriela.cervantes.tellez@intel.com>
(cherry picked from commit 9aa8d1c917)
This PR enables the parallel bandwidth iperf limit for kata metrics.
Fixes#7989
Signed-off-by: Gabriela Cervantes <gabriela.cervantes.tellez@intel.com>
(cherry picked from commit af59d4bf4a)
We're hitting a specific issue after updating, which will require some
work on dragonball before it can be re-added here.
The issue:
```
...
3: failed to do rafs mount\\n
4: fail to attach rafs \\\"/var/lib/containerd-nydus/snapshots/2/fs/image/image.boot\\\"\\n
5: add share fs mount\\n
6: Mount rafs at
/rafs/197ef3db03c86b91bf3045ff59183ce8b5750941ad1d3484f4a8301a70f5109f/rootfs_lower
error: Failed to Mount backend
...
Caused by:
vmm action error: FsDevice(AttachBackendFailed(\\\"attach/detach a
backend filesystem failed:: missing field `version` at line 1 column
489\\\"))\"): unknown"
```
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
(cherry picked from commit aba36ab188)
This will ensure we're testing with the correct runtime, instead of
using the `default` one.
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
(cherry picked from commit b8a8dfcd15)
Fix the arch error when downloading the nydus tarball.
Signed-off-by: ChengyuZhu6 <chengyu.zhu@intel.com>
Signed-off-by: Steven Horsman <steven@uk.ibm.com>
(cherry picked from commit f6df3d6efb)
To support the v0.12.0 nydus-snapshotter, we need to update the config
files and the commandline to start nydus-snapshotter.
Signed-off-by: ChengyuZhu6 <chengyu.zhu@intel.com>
(cherry picked from commit 2f9c9e2e63)
And with this we finally enable the nydus tests to run as part of our
GHA CI.
Fixes: #6543
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
(cherry picked from commit b73bde320d)
Let's have all the dependencies needed for running the nydus tests
installed.
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
(cherry picked from commit b3904a1a30)
We've been simply doing nothing whenever `install-kata` was called, and
that was the intent when we added the placeholder calls.
Now, let's install kata, as expected. :-)
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
(cherry picked from commit d2b3b67f5d)
As we've added install_nydus() and install_nydus_snapshotter(), which do
conform with the pattern we're following on GHA, let's rely on them
rather than relying on the bits coming from nydus_test.sh.
Later on we'll have install_nydus() and install_nydus_snapshotter() as
part of the dependencies install in our `gha-run.sh`.
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
(cherry picked from commit 0ec00ad42e)
Similarly to what's been done for the cri-containerd tests, as part of
84dd02e0f9, we need to add the timeout
here for the crictl calls.
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
(cherry picked from commit 568439c77b)
Otherwise we may face errors like:
```
getting sandbox status of pod "d3af2db414ce8": metadata.Name,
metadata.Namespace or metadata.Uid is not in metadata
"&PodSandboxMetadata{Name:nydus-sandbox,Uid:,Namespace:default,Attempt:1,}"
getting sandbox status of pod "-A": rpc error: code = NotFound desc = an
error occurred when try to find sandbox: not found
```
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
(cherry picked from commit 5ac3b76eb1)
Otherwise we canoot properly start the nydus snapshotter, nor properly
kill it after it's been started.
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
(cherry picked from commit 376574a16c)
The "source ..." we've been doing was not changed since those tests were
part of the Jenkins tests, and we need to adapt them, either setting the
correct path or entirely removing the ones that are not relevant to us
anymore.
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
(cherry picked from commit 4290fd4b67)
As that's what we've been using as part of the GHA.
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
(cherry picked from commit a84efa3e87)
This function will be used to download and install the
nydus-snapshotter, and it follows the same pattern we already have
introduced for downloading and installing another dependencies from
GitHub.
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
(cherry picked from commit 56a14b3950)
This function will be used to download and install nydus, and it follows
the same pattern we already have introduced for downloading and
installing another dependencies from GitHub.
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
(cherry picked from commit b6563783e2)
Now that the static-checks job only takes care of running the
static-checks, let's clean it up, remove all the unneeded steps, make
sure that we're using the actions in their latest version, and have it
running in a cost free runner.
At some point I'd like to see those tests done in parallel, in the same
way that I've organised the build-checks, but that's something for
someone else, at some other time.
Fixes: #7974 -- part 0
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
(cherry picked from commit 8b1e9b0c75)
With this we're removing the dragonball static-checks CI, as the test is
running here now. :-)
Fixes: #7974 -- part 0
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
(cherry picked from commit 2c5ca2eaf8)
We're moving it out of the previous "static-checks" confusing matrix,
and adding it to the matrix that was currently being used for the `make
vendor` and `make check` checks.
This will allow us to have one job per component, and with that we can
easily run those in parallel and on the zero cost runners.
Fixes: #7974 -- part 0
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
(cherry picked from commit 509c309ab2)
We're moving it out of the previous "static-checks" confusing matrix,
and adding it to the matrix that was currently being used for the `make
vendor` and `make check` checks.
This will allow us to have one job per component, and with that we can
easily run those in parallel and on the zero cost runners.
Fixes: #7974 -- part 0
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
(cherry picked from commit 4e963cedf4)
Otherwise `make test` will simply fail with:
```
error[E0583]: file not found for module `config`
```
Fixes: #7974 -- part 0
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
(cherry picked from commit 08f2e5ae0b)
This makes it pssible to run the tests in the cost free runners, which
are not KVM capable.
Fixes: #7974 -- part 0
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
(cherry picked from commit 2bc3a616ae)
Otherwise `make test` will simply fail with:
```
error[E0583]: file not found for module `version`
```
Fixes: #7974 -- part 0
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
(cherry picked from commit 46daddc500)
Otherwise `make test` will fail with:
```
error[E0583]: file not found for module `version`
```
Fixes: #7974 -- part 0
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
(cherry picked from commit ec826f328f)
It makes things way simpler, waaaaay simpler.
Fixes: #7974 -- part 0
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
(cherry picked from commit 1d32410a83)
We're moving it out of the previous "static-checks" confusing matrix,
and adding it to the matrix that was currently being used for the `make
vendor` checks.
This will allow us to have one job per component, and with that we can
easily run those in parallel and on the zero cost runners.
Fixes: #7974 -- part 0
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
(cherry picked from commit bf888b9a5e)
clippy is used as part our tests, so it's useful to have it installed
while we're already installing rust.
In case of developers, they also better be using it. :-)
Fixes: #7974 -- part 0
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
(cherry picked from commit e125775863)
Similarly to the static-check jobs, those jobs can be run on the zero
cost runners.
Fixes: #7974 -- part 0
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
(cherry picked from commit e2c61a152c)
We'll use it as part of the refactoring we're doing in the static check
tests.
I can see a lot of other uses of this, but changing all of them to this
one is out of the scope for this PR.
Fixes: #7974 -- part 0
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
(cherry picked from commit 6794d4c843)
We can rely on the functions that are now part of the common.bash.
Fixes: #7974 -- part 0
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
(cherry picked from commit e64508c308)
We can use this a lot as part of our CI, but right now I'm just moving
those here with the intent to use later on in this series.
Fixes: #7974 -- part 0
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
(cherry picked from commit 11dff731b7)
