Since it aligns with the create_container_timeout definition in
runtime-go, we need to set the value in configuration.toml in seconds,
not milliseconds. We must also convert it to milliseconds when the
configuration is loaded for request_timeout_ms.
Signed-off-by: Alex Lyn <alex.lyn@antgroup.com>
ef642fe890 added a special case to avoid
moving cgroups that are on the "default" slice in case of deletion.
However, this special check should be done in the Parent() method
instead, which ensures that the default resource controller ID is
returned, instead of ".".
Fixes: #11599
Signed-off-by: Fabiano Fidêncio <fidencio@northflank.com>
- Set guest Storage.options for block rootfs to empty (do not propagate host mount options).
- Align behavior with Go runtime: only add xfs nouuid when needed.
Signed-off-by: Caspian443 <scrisis843@gmail.com>
We moved to `.zst`, but users still use the upstream kata-manager to
download older versions of the project, thus we need to support both
suffixes.
Fixes: #11714
Signed-off-by: Fabiano Fidêncio <fidencio@northflank.com>
Similar to what we've done for Cloud Hypervisor in the commit
9f76467cb7, we're backporting a runtime-rs
feature that would be benificial to have as part of the go runtime.
This allows users to use virito-balloon for the hypervisor to reclaim
memory freed by the guest.
Signed-off-by: Fabiano Fidêncio <fidencio@northflank.com>
The default suggestion for top-level permissions was
`contents: read`, but scorecard notes anything other than empty,
so try updating it and see if there are any issues. I think it's
only needed if we run workflows from other repos.
Signed-off-by: stevenhorsman <steven@uk.ibm.com>
Since the previous tightening a few workflow updates have
gone in and the zizmor job isn't flagging them as issues,
so address this to remove potential attack vectors
Signed-off-by: stevenhorsman <steven@uk.ibm.com>
This reverts commit cb5f143b1b, as the
cached packages have been regenerated after the switch to using zstd.
Signed-off-by: Fabiano Fidêncio <fidencio@northflank.com>
As part of the go 1.24.6 bump there are errors about the incorrect
use of a errorf, so switch to the non-formatting version, or add
the format string as appropriate
Signed-off-by: stevenhorsman <steven@uk.ibm.com>
golang 1.25 has been released, so 1.23 is EoL,
so we should update to ensure we don't end up with security issues
Signed-off-by: stevenhorsman <steven@uk.ibm.com>
Update the two workflows that used setup-go to
instead call `install_go.sh` script, which handles
installing the correct version of golang
Signed-off-by: stevenhorsman <steven@uk.ibm.com>
`${kernel_name,,}` is bash 4.0 and not posix compliant, so doesn't
work on macos, so switch to `tr` which is more widely
supported
Signed-off-by: stevenhorsman <steven@uk.ibm.com>
In #11693 the cc_init_data annotation was changes to be hypervisor
scoped, so each hypervisor needs to explicitly allow it in order to
use it now, so add this to both the go and rust runtime's remote
configurations
Signed-off-by: stevenhorsman <steven@uk.ibm.com>
We need to get the root_hash.txt file from the image build, otherwise
there's no way to build the shim using those values for the
configuration files.
Signed-off-by: Fabiano Fidêncio <fidencio@northflank.com>
Although the compress ratio is not as optimal as using xz, it's way
faster to compress / uncompress, and it's "good enough".
This change is not small, but it's still self-contained, and has to get
in at once, in order to help bisects in the future.
Signed-off-by: Fabiano Fidêncio <fabiano@fidencio.org>
As 3.18 is already EOL.
We need to add `--break-system-packages` to enforce the install of the
installation of the yq version that we rely on. The tests have shown
that no breakage actually happens, fortunately.
Signed-off-by: Fabiano Fidêncio <fabiano@fidencio.org>
Currently, we change vm_rootfs_driver as the initdata device driver
with block_device_driver.
Fixes#11697
Signed-off-by: Alex Lyn <alex.lyn@antgroup.com>
we also need support initdat within nonprotection even though the
platform is detected as NonProtection or usually is called nontee
host. Within these cases, there's no need to validate the item of
`confidential_guest=true`, we believe the result of the method
`available_guest_protection()?`.
Fixes#11697
Signed-off-by: Alex Lyn <alex.lyn@antgroup.com>
The default `reconnect_timeout` (3 seconds) was found to be insufficient for
IBM SEL when using VSOCK. This commit updates the timeouts as follows:
- `dial_timeout_ms`: Set to 90ms to match the value used in go-runtime for IBM SEL
- `reconnect_timeout_ms`: Increased to 5000ms based on empirical testing
Signed-off-by: Hyounggyu Choi <Hyounggyu.Choi@ibm.com>
Add support for the `InitData` resource config on IBM SEL,
so that a corresponding block device is created and the
initdata is passed to the guest through this device.
Note that we skip passing the initdata hash via QEMU’s
object, since the hypervisor does not yet support this
mechanism for IBM SEL. It will be introduced separately
once QEMU adds the feature.
Signed-off-by: Hyounggyu Choi <Hyounggyu.Choi@ibm.com>
Linux v6.16 brings some useful features for the confidential guests.
Most importantly, it adds an ABI to extend runtime measurement registers
(RTMR) for the TEE platforms supporting it. This is currently enabled
on Intel TDX only.
The kernel version bump from v6.12.x to v6.16 forces some CONFIG_*
changes too:
MEMORY_HOTPLUG_DEFAULT_ONLINE was dropped in favor of more config
choices. The equivalent option is MHP_DEFAULT_ONLINE_TYPE_ONLINE_AUTO.
X86_5LEVEL was made unconditional. Since this was only a TDX
configuration, dropping it completely as part of v6.16 is fine.
CRYPTO_NULL2 was merged with CRYPTO_NULL. This was only added in
confidential guest fragments (cryptsetup) so we can drop it in this update.
CRYPTO_FIPS now depends on CRYPTO_SELFTESTS which further depends on
EXPERT which we don't have. Enable both in a separate config fragment
for confidential guests. This can be moved to a common setting once
other targets bump to post v6.16.
CRYPTO_SHA256_SSE3 arch optimizations were reworked and are now enabled
by default. Instead of adding it to whitelist.conf, just drop it completely
since it was only enabled as part of "measured boot" feature for
confidential guests. CONFIG_CRYPTO_CRC32_S390 was reworked the same way.
In this case, whitelist.conf is needed.
Signed-off-by: Mikko Ylinen <mikko.ylinen@intel.com>
This reverts commit ede773db17.
`cc_init_data` should be under a hypervisor category because
it is a hypervisor-specific feature. The annotation including
`runtime` also breaks a logic for `is_annotation_enabled()`.
Signed-off-by: Hyounggyu Choi <Hyounggyu.Choi@ibm.com>
We need to include `cc_init_data` in the enable_annotations
array to pass the data. Since initdata is a CoCo-specific
feature, this commit introduces a new array,
`DEFENABLEANNOTATIONS_COCO`, which contains the required
string and applies it to the relevant CoCo configuration.
Signed-off-by: Hyounggyu Choi <Hyounggyu.Choi@ibm.com>
Currently, there are 2 issues for the empty initdata annotation
test:
- Empty string handling
- "\[CDH\] \[ERROR\]: Get Resource failed" not appearing
`add_hypervisor_initdata_overrides()` does not handle
an empty string, which might lead to panic like:
```
called `Result::unwrap()` on an `Err` value: gz decoder failed
Caused by:
failed to fill whole buffer
```
This commit makes the function return an empty string
for a given empty input and updates the assertion string
to one that appears in both go-runtime and runtime-rs.
Signed-off-by: Alex Lyn <alex.lyn@antgroup.com>
Signed-off-by: Hyounggyu Choi <Hyounggyu.Choi@ibm.com>
Currently, runtime-rs related code within the libs directory lacks
sufficient CI protection. We frequently observe the following issues:
- Inconsistent Code Formatting: Code that has not been properly
formatted
is merged.
- Failing Tests: Code with failing unit or integration tests is merged.
To address these issues, we need introduce stricter CI checks for the
libs directory. This may specifically include:
- Code Formatting Checks
- Mandatory Test Runs
Fixes#11512
Signed-off-by: alex.lyn <alex.lyn@antgroup.com>
To make it aligned with the setting of runtime-go, we should keep
it as empty when users doesn't enable and set its specified path.
Signed-off-by: Alex Lyn <alex.lyn@antgroup.com>
We need to make sure that we use the latest kernel
and rebuild the initrd and image for the nvidia-gpu
use-cases otherwise the tests will fail since
the modules are not build against the new kernel and
they simply fail to load.
Signed-off-by: Zvonko Kaiser <zkaiser@nvidia.com>
OSV-Scanner highlights go.mod references to go stdlib 1.23.0 contrary to intention in versions.yaml, so synchronize them.
Make a converse comment for versions.yaml.
Fixes: #11700
Signed-off-by: Alex Tibbles <alex@bleg.org>
Let's rename the runtime-rs initdata annotation from
`io.katacontainers.config.runtime.cc_init_data` to
`io.katacontainers.config.hypervisor.cc_init_data`.
Rationale:
- initdata itself is a hypervisor-specific feature
- the new name aligns with the annotation handling logic:
c92bb1aa88/src/libs/kata-types/src/annotations/mod.rs (L514-L968)
This commit updates the annotation for go-runtime and tests accordingly.
Signed-off-by: Hyounggyu Choi <Hyounggyu.Choi@ibm.com>
Enable testing of initdata on the qemu-coco-dev and qemu-se
runtime classes, so we can validate the function on s390x
Signed-off-by: stevenhorsman <steven@uk.ibm.com>
This commit support the seccomp_sandbox option from the configuration.toml file
and add the logic for appending command-line arguments based on this new configuration parameter.
Fixes: #11524
Signed-off-by: wangxinge <wangxinge@bupt.edu.cn>
Previouly it is reusing the ovmf, which will enter some
issue for path checking, so move to aavmf as it should
be.
Signed-off-by: Kevin Zhao <kevin.zhao@linaro.org>
Read only the sealed secret prefix instead of the whole file.
Improves performance and reduces memory usage in I/O-heavy environments.
Fixes: #11643
Signed-off-by: Park.Jiyeon <jiyeonnn2@icloud.com>
Dependening on the platform configuration, users might want to
set a more secure policy than the QEMU default.
Signed-off-by: Paul Meyer <katexochen0@gmail.com>
This change introduces a new command line option `--vm`
to boot up a pod VM for testing. The tool connects with
kata agent running inside the VM to send the test commands.
The tool uses `hypervisor` crates from runtime-rs for VM
lifecycle management. Current implementation supports
Qemu & Cloud Hypervisor as VMMs.
In summary:
- tool parses the VMM specific runtime-rs kata config file in
/opt/kata/share/defaults/kata-containers/runtime-rs/*
- prepares and starts a VM using runtime-rs::hypervisor vm APIs
- retrieves agent's server address to setup connection
- tests the requested commands & shutdown the VM
Fixes#11566
Signed-off-by: Sumedh Alok Sharma <sumsharma@microsoft.com>
The seccomp feature for Cloud Hypervisor and Firecracker is enabled by default.
This commit introduces an option to disable seccomp for both and updates the built-in configuration.toml file accordingly.
Fixes: #11535
Signed-off-by: wangxinge <wangxinge@bupt.edu.cn>
Route kata-shim logs directly to systemd-journald under 'kata' identifier.
This refactoring enables `kata-shim` logs to be properly attributed to
'kata' in systemd-journald, instead of inheriting the 'containerd'
identifier.
Previously, `kata-shim` logs were challenging to filter and debug as
they
appeared under the `containerd.service` unit.
This commit resolves this by:
1. Introducing a `LogDestination` enum to explicitly define logging
targets (File or Journal).
2. Modifying logger creation to set `SYSLOG_IDENTIFIER=kata` when
logging
to Journald.
3. Ensuring type safety and correct ownership handling for different
logging backends.
This significantly enhances the observability and debuggability of Kata
Containers, making it easier to monitor and troubleshoot Kata-specific
events.
Fixes: #11590
Signed-off-by: Hyounggyu Choi <Hyounggyu.Choi@ibm.com>
Signed-off-by: Alex Lyn <alex.lyn@antgroup.com>
After moving Arm64 CI nodes to new one, we do faced an interesting
issue for timeout when it executes the command with crictl runp,
the error is usally: code = DeadlineExceeded
Fixes: #11662
Signed-off-by: Kevin Zhao <kevin.zhao@linaro.org>
This series should make runtime-rs's vcpu allocation behaviour match the
behaviour of runtime-go so we can now enable pertinent tests which were
skipped so far due the difference between both shims.
Signed-off-by: Pavel Mores <pmores@redhat.com>
Configuration information is adjusted after loading from file but so
far, there has been no similar check for configuration coming from
annotations. This commit introduces re-adjusting config after
annotations have been processed.
A small refactor was necessary as a prerequisite which introduces
function TomlConfig::adjust_config() to make it easier to invoke
the adjustment for a whole TomlConfig instance. This function is
analogous to the existing validate() function.
The immediate motivation for this change is to make sure that 0
in "default_vcpus" annotation will be properly adjusted to 1 as
is the case if 0 is loaded from a config file. This is required
to match the golang runtime behaviour.
Signed-off-by: Pavel Mores <pmores@redhat.com>
Also included (as commented out) is a test that does not pass although
it should. See source code comment for explanation why fixing this seems
beyond the scope of this PR.
Signed-off-by: Pavel Mores <pmores@redhat.com>
This commit focuses purely on the formal change of type. If any subsequent
changes in semantics are needed they are purposely avoided here so that the
commit can be reviewed as a 100% formal and 0% semantic change.
Signed-off-by: Pavel Mores <pmores@redhat.com>
This commit addresses a part of the same problem as PR #7623 did for the
golang runtime. So far we've been rounding up individual containers'
vCPU requests and then summing them up which can lead to allocation of
excess vCPUs as described in the mentioned PR's cover letter. We address
this by reversing the order of operations, we sum the (possibly fractional)
container requests and only then round up the total.
We also align runtime-rs's behaviour with runtime-go in that we now
include the default vcpu request from the config file ('default_vcpu')
in the total.
We diverge from PR #7623 in that `default_vcpu` is still treated as an
integer (this will be a topic of a separate commit), and that this
implementation avoids relying on 32-bit floating point arithmetic as there
are some potential problems with using f32. For instance, some numbers
commonly used in decimal, notably all of single-decimal-digit numbers
0.1, 0.2 .. 0.9 except 0.5, are periodic in binary and thus fundamentally
not representable exactly. Arithmetics performed on such numbers can lead
to surprising results, e.g. adding 0.1 ten times gives 1.0000001, not 1,
and taking a ceil() results in 2, clearly a wrong answer in vcpu
allocation.
So instead, we take advantage of the fact that container requests happen
to be expressed as a quota/period fraction so we can sum up quotas,
fundamentally integral numbers (possibly fractional only due to the need
to rewrite them with a common denominator) with much less danger of
precision loss.
Signed-off-by: Pavel Mores <pmores@redhat.com>
When hot-plugging CPUs on QEMU, we send a QMP command with JSON
arguments. QEMU 9.2 recently became more strict[1] enforcing the
JSON schema for QMP parameters. As a result, running Kata Containers
with QEMU 9.2 results in a message complaining that the core-id
parameter is expected to be an integer:
```
qmp hotplug cpu, cpuID=cpu-0 socketID=1, error:
QMP command failed:
Invalid parameter type for 'core-id', expected: integer
```
Fix that by changing the core-id, socket-id and thread-id to be
integer values.
[1]: be93fd5372Fixes: #11633
Signed-off-by: Christophe de Dinechin <dinechin@redhat.com>
As we have changed the initdata annotation definition, Accordingly, we also
need correct its const definition with KATA_ANNO_CFG_RUNTIME_INIT_DATA.
Signed-off-by: Alex Lyn <alex.lyn@antgroup.com>
This adds SECURITY.md to the list of GH-native files that should be excluded by
the reference checker.
Today this is useful for downstreams who already have a SECURITY.md file for
compliance reasons. When Kata onboards that file, this commit will also be
required.
Signed-off-by: Aurélien Bombo <abombo@microsoft.com>
When the network interface provisioned by the CNI has static ARP table entries,
the runtime calls AddARPNeighbor to propagate these to the agent. As of today,
these calls are simply rejected.
In order to allow the calls, we do some sanity checks on the arguments:
We must ensure that we don't unexpectedly route traffic to the host that was
not intended to leave the VM. In a first approximation, this applies to
loopback IPs and devices. However, there may be other sensitive ranges (for
example, VPNs between VMs), so there should be some flexibility for users to
restrict this further. This is why we introduce a setting, similar to
UpdateRoutes, that allows restricting the neighbor IPs further.
The only valid state of an ARP neighbor entry is NUD_PERMANENT, which has a
value of 128 [1]. This is already enforced by the runtime.
According to rtnetlink(7), valid flag values are 8 and 128, respectively [2],
thus we allow any combination of these.
[1]: https://github.com/torvalds/linux/blob/4790580/include/uapi/linux/neighbour.h#L72
[2]: https://github.com/torvalds/linux/blob/4790580/include/uapi/linux/neighbour.h#L49C20-L53Fixes: #11664
Signed-off-by: Markus Rudy <mr@edgeless.systems>
To make it work within CI, we do alignment with kata-runtime's definition
with "io.katacontainers.config.runtime.cc_init_data".
Signed-off-by: Alex Lyn <alex.lyn@antgroup.com>
Print more details about the behavior of "kubectl logs", trying to understand
errors like:
https://github.com/kata-containers/kata-containers/actions/runs/16662887973/job/47164791712
not ok 1 Check the number vcpus are correctly allocated to the sandbox
(in test file k8s-sandbox-vcpus-allocation.bats, line 37)
`[ `kubectl logs ${pods[$i]}` -eq ${expected_vcpus[$i]} ]' failed with status 2
No resources found in kata-containers-k8s-tests namespace.
...
k8s-sandbox-vcpus-allocation.bats: line 37: [: -eq: unary operator expected
Signed-off-by: Dan Mihai <dmihai@microsoft.com>
This auto-detects the repo by default (instead of having to specify
KATA_DEV_MODE=true) so that forked repos can leverage the static-checks.yaml CI
check without modification.
An alternative would have been to pass the repo in static-checks.yaml. However,
because of the matrix, this would've changed the check name, which is a pain to
handle in either the gatekeeper/GH UI.
Example fork failure:
https://github.com/microsoft/kata-containers/actions/runs/16656407213/job/47142421739#step:8:75
I've tested this change to work in a fork.
Signed-off-by: Aurélien Bombo <abombo@microsoft.com>
In order to have a reproducible code generation process, we need to pin
the versions of the tools used. This is accomplished easiest by
generating inside a container.
This commit adds a container image definition with fixed dependencies
for Golang proto/ttrpc code generation, and changes the agent Makefile
to invoke the update-generated-proto.sh script from within that
container.
Signed-off-by: Markus Rudy <mr@edgeless.systems>
The generated Go bindings for the agent are out of date. This commit
was produced by running
src/agent/src/libs/protocols/hack/update-generated-proto.sh with
protobuf compiler versions matching those of the last run, according to
the generated code comments.
Since there are new RPC methods, those needed to be added to the
HybridVSockTTRPCMockImp.
Signed-off-by: Markus Rudy <mr@edgeless.systems>
Updated versions.yaml to use Firecracker v1.12.1.
Replaced firecracker and jailer binaries under /opt/kata/bin.
Tested with kata-fc runtime on Kubernetes:
- Deployed pods using gitpod/openvscode-server
- Verified microVM startup, container access, and Firecracker usage
- Confirmed Firecracker and jailer versions via CLI
Signed-off-by: Kumar Mohit <68772712+itsmohitnarayan@users.noreply.github.com>
- "confidential_emptyDir" becomes "emptyDir" in the settings file.
- "confidential_configMap" becomes "configMap" in settings.
- "mount_source_cpath" becomes "cpath".
- The new "root_path" gets used instead of the old "cpath" to point to
the container root path..
- "confidential_guest" is no longer used. By default it gets replaced
by "enable_configmap_secret_storages"=false, because CoCo is using
CopyFileRequest instead of the Storage data structures for ConfigMap
and/or Secret volume mounts during CreateContainerRequest.
- The value of "guest_pull" becomes true by default.
- "image_layer_verification" is no longer used - just CoCo's guest pull
is supported.
- The Request input files from unit tests are changing to reflect the
new default settings values described above.
- tests/integration/kubernetes/tests_common.sh adjusts the settings for
platforms that are not set-up for CoCo during CI (i.e., platforms
other than SNP, TDX, and CoCo Dev).
Signed-off-by: Dan Mihai <dmihai@microsoft.com>
Skip pulling container image layers when guest-pull=true. The contents
of these layers were ignored due to:
- #11162, and
- tarfs snapshotter support having been removed from genpolicy.
Signed-off-by: Dan Mihai <dmihai@microsoft.com>
AKS Confidential Containers are using the tarfs snapshotter. CoCo
upstream doesn't use this snapshotter, so remove this Policy complexity
from upstream.
Signed-off-by: Dan Mihai <dmihai@microsoft.com>
`mem-agent` here is now a library and do not contain examples, ignore
Cargo.lock to get rid of untracked file noise produced by `cargo run` or
`cargo test`.
Signed-off-by: Ruoqing He <heruoqing@iscas.ac.cn>
Re-generates the client code against Cloud Hypervisor v47.0.
Note: The client code of cloud-hypervisor's OpenAPI is automatically
generated by openapi-generator.
Signed-off-by: Ruoqing He <heruoqing@iscas.ac.cn>
`MmapRegion` is only used while `virtio-fs` is enabled during testing
dragonball, gate the import behind `virtio-fs` feature.
Signed-off-by: Ruoqing He <heruoqing@iscas.ac.cn>
Some variables went unused if certain features are not enabled, use
`#[allow(unused)]` to suppress those warnings at the time being.
Signed-off-by: Ruoqing He <heruoqing@iscas.ac.cn>
`VcpuManagerError` is only needed when `host-device` feature is enabled,
gate the import behind that feature.
Signed-off-by: Ruoqing He <heruoqing@iscas.ac.cn>
Code inside `test_mac_addr_serialization_and_deserialization` test does
not actually require this `with-serde` feature to test, removing the
assertion here to enable this test.
Signed-off-by: Ruoqing He <heruoqing@iscas.ac.cn>
Add full cgroups support on host. Cgroups are managed by `FsManager` and
`SystemdManager`. As the names impies, the `FsManager` manages cgroups
through cgroupfs, while the `SystemdManager` manages cgroups through
systemd. The two manages support cgroup v1 and cgroup v2.
Two types of cgroups path are supported:
1. For colon paths, for example "foo.slice:bar:baz", the runtime manages
cgroups by `SystemdManager`;
2. For relative/absolute paths, the runtime manages cgroups by
`FsManager`.
vCPU threads are added into the sandbox cgroups in cgroup v1 + cgroupfs,
others, cgroup v1 + systemd, cgroup v2 + cgroupfs, cgroup v2 + systemd, VMM
process is added into the cgroups.
The systemd doesn't provide a way to add thread to a unit. `add_thread()`
in `SystemdManager` is equivalent to `add_process()`.
Cgroup v2 supports threaded mode. However, we should enable threaded mode
from leaf node to the root node (`/`) iteratively [1]. This means the
runtime needs to modify the cgroups created by container runtime (e.g.
containerd). Considering cgroupfs + cgroup v2 is not a common combination,
its behavior is aligned with systemd + cgroup v2, which is not allowed to
manage process at the thread level.
1: https://www.kernel.org/doc/html/v4.18/admin-guide/cgroup-v2.html#threadsFixes: #11356
Signed-off-by: Xuewei Niu <niuxuewei.nxw@antgroup.com>
As some reasons, it first should make it align with runtime-go, this
commit will do this work.
Fixes#11543
Signed-off-by: alex.lyn <alex.lyn@antgroup.com>
The actual memory usage on the host is equal to the hypervisor memory usage
plus the user memory usage. An OOM killer might kill the shim when the
memory limit on host is same with that of container and the container
consumes all available memory. In this case, the containerd will never
receive OOM event, but get "task exit" event. That makes the `k8s-oom.bats`
test fail.
The fix is to add a new container to increase the sandbox memory limit.
When the container "oom-test" is killed by OOM killer, there is still
available memory for the shim, so it will not be killed.
Signed-off-by: Xuewei Niu <niuxuewei.nxw@antgroup.com>
When enabling systemd cgroup driver and sandbox cgroup only, the shim is
under a systemd unit. When the unit is stopping, systemd sends SIGTERM to
the shim. The shim can't exit immediately, as there are some cleanups to
do. Therefore, ignoring SIGTERM is required here. The shim should complete
the work within a period (Kata sets it to 300s by default). Once a timeout
occurs, systemd will send SIGKILL.
Signed-off-by: Xuewei Niu <niuxuewei.nxw@antgroup.com>
Our CI keeps on getting
```
jq: error (at <stdin>:1): Cannot index string with string "tag_name"
```
during the install dependencies phase, which I suspect
might be due to github rate limits being reduced, so try
to pass through the `GH_TOKEN` env and use it in the auth header.
Signed-off-by: stevenhorsman <steven@uk.ibm.com>
It is important that we continue to support VirtIO-SCSI. While
VirtIO-BLK is a common choice, virtio-scsi offers significant
performance advantages in specific scenarios, particularly when
utilizing iothreads and with NVMe Fabrics.
Maintaining Flexibility and Choice by supporting both virtio-blk and
virtio-scsi, we provide greater flexibility for users to choose the
optimal storage（virtio-blk, virtio-scsi) interface based on their
specific workload requirements and hardware configurations.
As virtio-scsi controller has been created when qemu vm starts with
block device driver is set to `virtio-scsi`. This commit is for blockdev_add
the backend block device and device_add frondend virtio-scsi device via qmp.
Fixes#11516
Signed-off-by: alex.lyn <alex.lyn@antgroup.com>
As block device index is an very important unique id of a block device
and can indicate a block device which is equivalent to device_id.
In case of index is required in calculating scsi LUN and reduce
useless arguments within reusing `hotplug_block_device`, we'd better
change the device_id with block device index.
Signed-off-by: alex.lyn <alex.lyn@antgroup.com>
In this commit, block device aio are introduced within hotplug_block_device
within qemu via qmp and the "iouring" is set the default.
Signed-off-by: alex.lyn <alex.lyn@antgroup.com>
It should be correctly handled within the device manager when do
create_block_device if the driver_option is virtio-scsi.
Signed-off-by: alex.lyn <alex.lyn@antgroup.com>
It supports handling scsi device when block device driver is `scsi`.
And it will ensure a correct storage source with LUN.
Fixes#11516
Signed-off-by: alex.lyn <alex.lyn@antgroup.com>
It's used to help discover scsi devices inside guest and also add a
new const value `KATA_SCSI_DEV_TYPE` to help pass information.
Signed-off-by: alex.lyn <alex.lyn@antgroup.com>
AIO is the I/O mechanism used by qemu with options:
- threads
Pthread based disk I/O.
- native
Native Linux I/O.
- io_uring (default mode)
Linux io_uring API. This provides the fastest I/O operations on
Signed-off-by: alex.lyn <alex.lyn@antgroup.com>
Although Previous implementation of hotplugging block device via QMP
can successfully hot-plug the regular file based block device, but it
fails when the backend is /dev/xxx(e.g. /dev/loop0). With analysis about
it, we can know that it lacks the ablility to hotplug host block devices.
This commit will fill the gap, and make it work well for host block
devices.
Signed-off-by: alex.lyn <alex.lyn@antgroup.com>
As there were a few moderate security vulnerability fixes missed as part
of the 3.19.0 release.
Signed-off-by: Fabiano Fidêncio <fidencio@northflank.com>
For the release itself, let's simply copy the VERSION file to the
tarball.
To do so, we had to change the logic that merges the build, as at that
point the tag is not yet pushed to the repo.
Signed-off-by: Fabiano Fidêncio <fidencio@northflank.com>
On commit 90bc749a19, we've changed the
QEMUTDXPATH in order to get it to work with GPUs, but the change broke
the non-GPU TDX use-case, which depends on the distro binary.
Signed-off-by: Fabiano Fidêncio <fidencio@northflank.com>
- Add nodeSelector configuration to values.yaml with empty default
- Update DaemonSet template to conditionally include nodeSelector
- Add documentation and examples for nodeSelector usage in README
- Allows users to restrict kata-containers deployment to specific nodes by labeling them
Signed-off-by: Gus Minto-Cowcher <gus@basecamp-research.com>
According to the issue [1], Tokio will panic when we are giving a blocking
socket to Tokio's `from_std()` method, the information is as follows:
```
A panic occurred at crates/agent/src/sock/vsock.rs:59: Registering a
blocking socket with the tokio runtime is unsupported. If you wish to do
anyways, please add `--cfg tokio_allow_from_blocking_fd` to your RUSTFLAGS.
```
A workaround is to set the socket to non-blocking.
1: https://github.com/tokio-rs/tokio/issues/7172
Signed-off-by: Xuewei Niu <niuxuewei.nxw@antgroup.com>
The KERNEL_DEBUG_ENABLED was missing in the outer shell script
so overrides via make were not possible.
Signed-off-by: Zvonko Kaiser <zkaiser@nvidia.com>
Bump these crates to remove the unmaintained dependency
proc-macro-error and remediate RUSTSEC-2024-0370
Signed-off-by: stevenhorsman <steven@uk.ibm.com>
Bump these crates across various components to remove the
dependency on unmaintained instant crate and remediate
RUSTSEC-2024-0384
Signed-off-by: stevenhorsman <steven@uk.ibm.com>
- The github generated template had an old version which
isn't valid for the pr-scan, so update to the latest
- The action needs also `actions: read` and `contents:read` to run in kata-containers
Signed-off-by: stevenhorsman <steven@uk.ibm.com>
Some of the nix apis we are using are now enabled by features,
so add these to resolve the compilation issues
Signed-off-by: stevenhorsman <steven@uk.ibm.com>
This new version of gc fixes s390x attestation, also introduces registry
configuration setting directly via initdata.
Signed-off-by: Xynnn007 <xynnn@linux.alibaba.com>
The peer pods project is using the agent-ctl tool in some
tests, so tagging our cache will let them more easily identify
development versions of kata for testing between releases.
Signed-off-by: stevenhorsman <steven@uk.ibm.com>
Sometimes, containers or execs do not use stdin, so there is no chance
to add parent stdin to the process's writer hashmap, resulting in the
parent stdin's fd not being closed when the process is cleaned up later.
Therefore, when creating a process, first explicitly add parent stdin to
the wirter hashmap. Make sure that the parent stdin's fd can be closed
when the process is cleaned up later.
Signed-off-by: Fupan Li <fupan.lfp@antgroup.com>
We want to be able to build a debug version of the kernel for various
use-cases like debugging, tracing and others.
Signed-off-by: Zvonko Kaiser <zkaiser@nvidia.com>
The convention for rootfs-* names is:
* rootfs-${image_type}-${special_build}
If this is not followed, cache will never work as expected, leading to
building the initrd / image on every single build, which is specially
constly when building the nvidia specific targets.
Signed-off-by: Fabiano Fidêncio <fidencio@northflank.com>
The init data could not be read properly within kata-agent because the
data length field was omitted, a consequence of a mismatch in the data
write format.
Fixes#11556
Signed-off-by: alex.lyn <alex.lyn@antgroup.com>
Now AA supports to receive initdata toml plaintext and deliver it in the
attestation. This patch creates a file under
'/run/confidential-containers/initdata'
to store the initdata toml and give it to AA process.
When we have a separate component to handle initdata, we will move the
logic to that component.
Signed-off-by: Xynnn007 <xynnn@linux.alibaba.com>
Update to https://github.com/teawater/mem-agent/tree/kata-20250627.
The commit list:
3854b3a Update nix version from 0.23.2 to 0.30.1
d9a4ced Update tokio version from 1.33 to 1.45.1
9115c4d run_eviction_single_config: Simplify check evicted pages after
eviction
68b48d2 get_swappiness: Use a rounding method to obtain the swappiness
value
14c4508 run_eviction_single_config: Add max_seq and min_seq check with
each info
8a3a642 run_eviction_single_config: Move infov update to main loop
b6d30cf memcg.rs: run_aging_single_config: Fix error of last_inc_time
check
54fce7e memcg.rs: Update anon eviction code
41c31bf cgroup.rs: Fix build issue with musl
0d6aa77 Remove lazy_static from dependencies
a66711d memcg.rs: update_and_add: Fix memcg not work after set memcg
issue
cb932b1 Add logs and change some level of some logs
93c7ad8 Add per-cgroup and per-numa config support
092a75b Remove all Cargo.lock to support different versions of rust
540bf04 Update mem-agent-srv, mem-agent-ctl and mem-agent-lib to
v0.2.0
81f39b2 compact.rs: Change default value of compact_sec_max to 300
c455d47 compact.rs: Fix psi_path error with cgroup v2 issue
6016e86 misc.rs: Fix log error
ded90e9 Set mem-agent-srv and mem-agent-ctl as bin
Fixes: #11478
Signed-off-by: teawater <zhuhui@kylinos.cn>
As the following job has passed 10 days in a row for the nightly test:
```
kata-containers-ci-on-push / run-k8s-tests-on-zvsi / run-k8s-tests (nydus, qemu-coco-dev, kubeadm)
```
this commit makes the job required again.
Signed-off-by: Hyounggyu Choi <Hyounggyu.Choi@ibm.com>
The teardown_common will print the description of the running pods, kill
them all and print the system's syslogs afterwards.
Signed-off-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Set the node in the spec template of a Job manifest, allowing to use
set_node() on tests like k8s-parallel.bats
Signed-off-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
The teardown_common will print the description of the running pods, kill
them all and print the system's syslogs afterwards.
Signed-off-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
The teardown_common will print the description of the running pods, kill
them all and print the system's syslogs afterwards.
Signed-off-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
The previous description for the `block_device_driver` was inaccurate or
outdated. This commit updates the documentation to provide a more
precise explanation of its function.
Fixes#11488
Signed-off-by: alex.lyn <alex.lyn@antgroup.com>
When we run a kata pod with runtime-rs/qemu and with a default
configuration toml, it will fail with error "unsupported driver type
virtio-scsi".
As virtio-scsi within runtime-rs is not so popular, we set default block
device driver with `virtio-blk-*`.
Fixes#11488
Signed-off-by: alex.lyn <alex.lyn@antgroup.com>
This patch changes the container process HashMap to use exec_id as the primary
key instead of PID, preventing exec_id collisions that could be exploited in
Confidential Computing scenarios where the host is less trusted than the guest.
Key changes:
- Changed `processes: HashMap<pid_t, Process>` to `HashMap<String, Process>`
- Added exec_id collision detection in `start()` method
- Updated process lookup operations to use exec_id directly
- Simplified `get_process()` with direct HashMap access
This prevents multiple exec operations from reusing the same exec_id, which
could be problematic in CoCo use cases where process isolation and unique
identification are critical for security.
Signed-off-by: Ankita Pareek <ankitapareek@microsoft.com>
The `/opt/kata/VERSION` file, which is created using `git describe
--tags`, requires the newly released tag to be updated in order to be
accurate.
To do so, let's add a `fetch-tags: true` to the checkout action used
during the `create-kata-tarball` job.
Signed-off-by: Fabiano Fidêncio <fidencio@northflank.com>
The CoCo non-TEE job (run-k8s-tests-coco-nontee) used to be required but
we had to withdraw it to fix a problem (#11156). Now the job is back
running and stable, so time to make it required again.
Signed-off-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
tempdir hasn't been updated for seven years and pulls in
remove_dir_all@0.5.3 which has security advisory
GHSA-mc8h-8q98-g5hr, so replace this with using tempfile,
which the crate got merged into and we use elsewhere in the
project
Signed-off-by: stevenhorsman <steven@uk.ibm.com>
Ignore Cargo.lock in `libs` to prevent developers from accidentally
track lock files in `libs` workspace.
Signed-off-by: Ruoqing He <heruoqing@iscas.ac.cn>
This PR adds support for adding a network device before starting the
cloud-hypervisor VM.
This commit will get the host devices from NamedHypervisorConfig and
assign it to VmConfig's devices which is for vfio devices when clh
starts launching.
And with this, it successfully finish the vfio devices conversion from
a generic Hypervisor config to a clh specific VmConfig.
Signed-off-by: alex.lyn <alex.lyn@antgroup.com>
Signed-off-by: Fupan Li <fupan.lfp@antgroup.com>
This commit introduce `host_devices` to help convert vfio devices from
a generic hypervisor config to a cloud-hypervisor specific VmConfig.
Signed-off-by: alex.lyn <alex.lyn@antgroup.com>
Signed-off-by: Fupan Li <fupan.lfp@antgroup.com>
This PR adds support for adding a vfio device before starting the
cloud-hypervisor VM (or cold-plug vfio device).
This commit changes "pending_devices" for clh implementation via adding
DeviceType::Vfio() into pending_devices. And it will get shared host devices
after correctly handling vfio devices (Specially for primary device).
Signed-off-by: alex.lyn <alex.lyn@antgroup.com>
Signed-off-by: Fupan Li <fupan.lfp@antgroup.com>
crates in `libs` workspace do not ship binaries, they are just libraries
for other workspace to reference, the `Cargo.lock` file hence would not
take effect. Removing Cargo.lock for `libs` workspace.
Signed-off-by: Ruoqing He <heruoqing@iscas.ac.cn>
In line with configuration for other TEEs, shared_fs should
be set to none for IBM SEL. This commit updates the value for
runtime/runtime-rs.
Signed-off-by: Hyounggyu Choi <Hyounggyu.Choi@ibm.com>
As we're using a `kubectl wait --timeout ...` to check whether the
kata-deploy pod's been deleted or not, let's remove the `--wait` from
the `helm uninstall ...` call as k0s tests were failing because the
`kubectl wait --timeout...` was starting after the pod was deleted,
making the test fail.
Signed-off-by: Fabiano Fidêncio <fidencio@northflank.com>
We've been pinning a specific version of k0s for CRI-O tests, which may
make sense for CRI-O, but doesn't make sense at all when it comes to
testing that we can install kata-deploy on latest k0s (and currently our
test for that is broken).
Let's bump to the latest, and from this point we start debugging,
instead of debugging on an ancient version of the project.
Signed-off-by: Fabiano Fidêncio <fidencio@northflank.com>
Bump url, reqwests and idna crates in order to move away from
idna <1.0.3 and remediate CVE-2024-12224.
Signed-off-by: stevenhorsman <steven@uk.ibm.com>
Previously, the rootlessDir variable in `src/runtime/virtcontainers/pkg/rootless.go` was initialized at
package load time using `os.Getenv("XDG_RUNTIME_DIR")`. However, in rootless
VMM mode, the correct value of $XDG_RUNTIME_DIR is set later during runtime
using os.Setenv(), so rootlessDir remained empty.
This patch defers the initialization of rootlessDir until the first call
to `GetRootlessDir()`, ensuring it always reflects the current environment
value of $XDG_RUNTIME_DIR.
Fixes: #11526
Signed-off-by: stevenfryto <sunzitai_1832@bupt.edu.cn>
There are workflows that rely on `az aks install-cli` to get kubectl
installed. There is a well-known problem on install-cli, related with
API usage rate limit, that has recently caused the command to fail
quite often.
This is replacing install-cli with the azure/setup-kubectl github
action which has no such as rate limit problem.
While here, removed the install_cli() function from gha-run-k8s-common.sh
so avoid developers using it by mistake in the future.
Fixes#11463
Signed-off-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Removing kernel config files realting
to SEV as part of the SEV deprecation
efforts.
Co-authored-by: Adithya Krishnan Kannan <AdithyaKrishnan.Kannan@amd.com>
Signed-off-by: Arvind Kumar <arvinkum@amd.com>
Removing runtime SEV functionality,
such as the kbs, ovmf, VMSA handling,
and SEV configs as part of deprecating
SEV from kata.
Co-authored-by: Adithya Krishnan Kannan <AdithyaKrishnan.Kannan@amd.com>
Signed-off-by: Arvind Kumar <arvinkum@amd.com>
Removing files related to SEV, responsible for
installing and configuring Kata containers.
Co-authored-by: Adithya Krishnan Kannan <AdithyaKrishnan.Kannan@amd.com>
Signed-off-by: Arvind Kumar <arvinkum@amd.com>
Add init data annotation within preparing remote hypervisor annotations
when prepare vm, so that it can be passed within CreateVMRequest.
Signed-off-by: alex.lyn <alex.lyn@antgroup.com>
679cc9d47c was merged and bumped the
podoverhead for the gpu related runtimeclasses. However, the bump on the
`kata-runtimeClasses.yaml` as overlooked, making our tests fail due to
that discrepancy.
Let's just adjust the values here and move on.
Signed-off-by: Fabiano Fidêncio <fidencio@northflank.com>
We cannot only rely only on default_cpu and default_memory in the
config, default is 1 and 2Gi but we need some overhead for QEMU and
the other related binaries running as the pod overhead. Especially
when QEMU is hot-plugging GPUs, CPUs, and memory it can consume more
memory.
Signed-off-by: Zvonko Kaiser <zkaiser@nvidia.com>
atty is unmaintained, with the last release almost 3 years
ago, so we don't need to check for updates, but instead will
remove it from out dependency tree.
Signed-off-by: stevenhorsman <steven@uk.ibm.com>
structopt features were integrated into clap v3 and so is not
actively updated and pulls in the atty crate which has a security
advisory, so update clap, remove structopts, update the code that
used it to remove the outdated dependencies.
Signed-off-by: stevenhorsman <steven@uk.ibm.com>
slog-term 2.9.0 included atty, which is unmaintained
as has a security advisory GHSA-g98v-hv3f-hcfr,
so bump the version across our components to remove
this dependency.
Signed-off-by: stevenhorsman <steven@uk.ibm.com>
We had the proper config.toml configuration for static builds
but were building the glibc target and not the musl target.
Signed-off-by: Zvonko Kaiser <zkaiser@nvidia.com>
The way GH works, we can only require Zizmor results on ALL PR runs, or
none, so remove the path filter.
Signed-off-by: Aurélien Bombo <abombo@microsoft.com>
Previously, the source field was subject to mandatory checks. However,
in guest-pull mode, this field doesn't consistently provide useful
information. Our practical experience has shown that relying on this
field for critical data isn't always necessary.
In other aspect, not all cases need mandatory check for KataVirtualVolume.
based on this fact, we'd better to make from_base64 do only one thing and
remove the validate(). Of course, We also keep the previous capability to
make it easy for possible cases which use such method and we rename it
clearly with from_base64_and_validate.
This commit relaxes the mandatory checks on the KataVirtualVolume specifically
for guest-pull mode, acknowledging its diminished utility in this context.
Signed-off-by: alex.lyn <alex.lyn@antgroup.com>
When hot plugging vcpu in dragonball hypervisor, use the synchronization
interface and wait until the hot plug cpu is executed in the guest
before returning. This ensures that the subsequent device hot plug will
not conflict with the previous call.
Signed-off-by: Fupan Li <fupan.lfp@antgroup.com>
Let dragonball's resize_vcpu api support synchronization, and only
return after the hot-plug of the CPU is successfully executed in the
guest kernel. This ensures that the subsequent device hot-plug operation
can also proceed smoothly.
Signed-off-by: Fupan Li <fupan.lfp@antgroup.com>
Got follow warning with make test of kata-agent:
Compiling rustjail v0.1.0 (/data/teawater/kata-containers/src/agent/rustjail)
Compiling kata-agent v0.1.0 (/data/teawater/kata-containers/src/agent)
warning: unused import: `std::os::unix::fs`
--> rustjail/src/mount.rs:1147:9
|
1147 | use std::os::unix::fs;
| ^^^^^^^^^^^^^^^^^
|
= note: `#[warn(unused_imports)]` on by default
This commit fixes it.
Fixes: #11508
Signed-off-by: teawater <zhuhui@kylinos.cn>
Introduce a const value `KATA_VIRTUAL_VOLUME_PREFIX` defined in the libs/kata-types,
and it'll be better import such const value from there.
Signed-off-by: alex.lyn <alex.lyn@antgroup.com>
This was originally implemented as a Jenkins skip and is only used in a few
workflows. Nowadays this would be better implemented via the gatekeeper.
Signed-off-by: Aurélien Bombo <abombo@microsoft.com>
This patch fixes the rules.rego file to ensure that the
policy is correctly parsed and applied by opa.
Signed-off-by: Archana Choudhary <archana1@microsoft.com>
This commit updates the `tests_common.sh` script
to enable the `confidential_guest`
setting for the coco tests in the Kubernetes
integration tests.
Signed-off-by: Archana Choudhary <archana1@microsoft.com>
This patch removes storages from the testcases.json file for execprocess.
This is because input storage objects are invalid for two reasons:
1. "io.katacontainers.fs-opt.layer=" is missing option in annotations.
2. by default, we don't have host-tarfs-dm-verity enabled, so the storage
objects are not created in policy.
Signed-off-by: Archana Choudhary <archana1@microsoft.com>
---
This patch introduces some basic checks for the
`image_guest_pull` storage type in the genpolicy tool.
Signed-off-by: Archana Choudhary <archana1@microsoft.com>
This patch improves the test framework for the
genpolicy tool by enabling the use of config maps.
Signed-off-by: Archana Choudhary <archana1@microsoft.com>
Add the definiation of variable DEFCREATECONTAINERTIMEOUT into
Makefile target with default timeout 30s.
Fixes: #485
Signed-off-by: alex.lyn <alex.lyn@antgroup.com>
It's used to indicate timeout value set for image pulling in
guest during creating container.
This allows users to set this timeout with annotation according to the
size of image to be pulled.
Fixes#10692
Signed-off-by: alex.lyn <alex.lyn@antgroup.com>
It allows users to set this create container timeout within
configuration.toml according to the size of image to be pulled
inside guest.
Fixes#10692
Signed-off-by: alex.lyn <alex.lyn@antgroup.com>
To better understand the impact of different timeout values on system
behavior, this section provides a more comprehensive explanation of the
request_timeout_ms:
This timeout value is used to set the maximum duration for the agent to
process a CreateContainerRequest. It's also used to ensure that workloads,
especially those involving large image pulls within the guest, have sufficient
time to complete.
Based on explaination above, it's renamed with `create_container_timeout`,
Specially, exposed in 'configuration.toml'
Fixes#10692
Signed-off-by: alex.lyn <alex.lyn@antgroup.com>
This helps considerably to avoid patching the code, and just adjusting
the build environment to use a smaller alignment than the default one.
Signed-off-by: Fabiano Fidêncio <fidencio@northflank.com>
These tests are not passing, or being maintained,
so as discussed on the AC meeting, we will skip them
from automatically running until they can be reviewed
and re-worked, so avoid wasting CI cycles.
Signed-off-by: stevenhorsman <steven@uk.ibm.com>
This adds Zizmor GHA security scanning as a PR gate.
Note that this does NOT require that Zizmor returns 0 alerts, but rather
that Zizmor's invocation completes successfully (regardless of how many
alerts it raises).
I will set up the former after this commit is merged (through the GH UI).
Signed-off-by: Aurélien Bombo <abombo@microsoft.com>
Enable GPU annotations by adding `default_gpus` and `default_gpu_model`
into the list of valid annotations `enable_annotations`.
Fixes#10484
Signed-off-by: alex.lyn <alex.lyn@antgroup.com>
Add GPU specific annotations used by remote hypervisor for instance
selection during `prepare_vm`.
Fixes#10484
Signed-off-by: alex.lyn <alex.lyn@antgroup.com>
Two annotations: `default_gpus and `default_gpu_model` as GPU annotations
are introduced for Kata VM configurations to improve instance selection on
remote hypervisors. By adding these annotations:
(1) `default_gpus`: Allows users to specify the minimum number of GPUs a VM
requires. This ensures that the remote hypervisor selects an instance
with at least that many GPUs, preventing resource under-provisioning.
(2) `default_gpu_model`: Lets users define the specific GPU model needed for
the VM. This is crucial for workloads that depend on particular GPU archs or
features, ensuring compatibility and optimal performance.
Fixes#10484
Signed-off-by: alex.lyn <alex.lyn@antgroup.com>
To provide the remote hypervisor with the necessary intelligence
to select the most appropriate instance for a given GPU instance,
leading to better resource allocation, two fields `default_gpus`
and `default_gpu_model` are introduced in `RemoteInfo`.
Fixes#10484
Signed-off-by: alex.lyn <alex.lyn@antgroup.com>
To better support containerd 2.1 and later versions, remove the
hardcoded `layer.erofs` and instead parse `/proc/mounts` to obtain the
real mount source (and `/sys/block/loopX/loop/backing_file` if needed).
If the mount source doesn't end with `layer.erofs`, it should be marked
as unsupported, as it may be a filesystem meta file generated by later
containerd versions for the EROFS flattened filesystem feature.
Also check whether the filesystem type is `overlay` or not, since the
containerd mount manager [1] may change it after being introduced.
[1] https://github.com/containerd/containerd/issues/11303
Fixes: f63ec50ba3 ("runtime: Add EROFS snapshotter with block device support")
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Current Dockerfile fails when trying to build from the root of the repo
docker build -t kata-monitor -f tools/packaging/kata-monitor/Dockerfile .
with "invalid go version '1.23.0': must match format 1.23"
Using go 1.23 in the Dockerfile fixes the build error
Signed-off-by: Saul Paredes <saulparedes@microsoft.com>
I notices that agent-ctl is including a 9 month old version of
image-rs and the libs crates haven't been update for potentially
many years, so bump all of these.
Signed-off-by: stevenhorsman <steven@uk.ibm.com>
This commit introduces the ability to run Pods without shared fs
mechanism in Kata.
The default shared fs can lead to unnecessary resource consumption
and security risks for certain use cases. Specifically, scenarios
where files only need to be copied into the VM once at Pod creation
(e.g., non-tee envs) and don't require dynamic updates make the shared
fs redundant and inefficient.
By explicitly disabling shared fs functionality, we reduce resource
overhead and shrink the attack surface. Users will need to employ
alternative methods(e.g. guest-pull) to ensure container images are
shared into the guest VM for these specific scenarios.
Signed-off-by: alex.lyn <alex.lyn@antgroup.com>
In the pre commit:74eccc54e7b31cc4c9abd8b6e4007c3a4c1d4dd4,
it missed return the right rootfs volume.
In the is_block_rootfs fn, if the rootfs is based on a
block device such as devicemapper, it should clear the
volume's source and let the device_manager to use the
dev_id to get the device's host path.
Signed-off-by: Fupan Li <fupan.lfp@antgroup.com>
For containerd's Blockfile Snapshotter, it will pass
a rootfs mounts with a rawfile as a mount source
and mount options with "loop" embeded.
To support this type of rootfs, it is necessary to identify this as a
blockfile rootfs through the "loop" flag, and then use the volume source
of the rootfs as the source of the block device to hot-insert it into
the guest.
Fixes:#11464
Signed-off-by: Fupan Li <fupan.lfp@antgroup.com>
Instead of building it every time, we can store the regorus
binary in OCI registry using oras and download it from there.
This reduces the install time from ~1m40s to ~15s.
Signed-off-by: Paul Meyer <katexochen0@gmail.com>
This commit add support of resize_vcpu for cloud-hypervisor
using the it's vm resize api. It can support bothof vcpu hotplug
and hot unplug.
Signed-off-by: Fupan Li <fupan.lfp@antgroup.com>
For cloud-hypervisor, currently only hot plugging of memory is
supported, but hot unplugging of memory is not supported. In addition,
by default, cloud-hypervisor uses ACPI-based memory hot-plugging instead
of virtio-mem based memory hot-plugging.
Signed-off-by: Fupan Li <fupan.lfp@antgroup.com>
Add API interfaces for get vminfo and resize. get vminfo can obtain the
memory size and number of vCPUs from the cloud hypervisor vmm in real
time. This interface provides information for the subsequent resize
memory and vCPU.
Signed-off-by: Fupan Li <fupan.lfp@antgroup.com>
The system's own Deserialize cannot implement parsing from string to
MacAddr, so we need to implement this trait ourself.
Signed-off-by: Fupan Li <fupan.lfp@antgroup.com>
To make it flexibility and extensibility This change modifies the Kata
Agent's handling of `InitData` to allow for unrecognized key-value pairs.
The `InitData` field now directly utilizes `HashMap<String, String>`,
enabling it to carry arbitrary metadata and information that may be
consumed by other components
Signed-off-by: alex.lyn <alex.lyn@antgroup.com>
During sandbox preparation, initdata should be specified to TdxConfig,
specially mrconfigid, which is used to pass to tdx guest report for
measurement.
Fixes#11180
Signed-off-by: alex.lyn <alex.lyn@antgroup.com>
SEV-SNP guest configuration utilizes a different set of properties
compared to the existing 'sev-guest' object. This change introduces
the `host-data` property within the sev-snp-guest object. This property
allows for configuring an SEV-SNP guest with host-provided data, which
is crucial for data integrity verification during attestation.
The `host-data` property is specifically valid for SEV-SNP guests
running
on a capable platform. It is configured as a base64-encoded string when
using the sev-snp-guest object.
the example cmdline looks like:
```shell
-object sev-snp-guest,id=sev-snp0,host-data=CGNkCHoBC5CcdGXir...
```
Fixes#11180
Signed-off-by: alex.lyn <alex.lyn@antgroup.com>
To facilitate the transfer of initdata generated during
`prepare_initdata_device_config`, a new parameter has been
introduced into the `prepare_protection_device_config` function.
Furthermore, to specifically pass initdata to SEV-SNP Guests, a
`host_data` field has been added to the `SevSnpConfig` structure.
However, this field is exclusively applicable to the SEV-SNP platform.
Signed-off-by: alex.lyn <alex.lyn@antgroup.com>
Retrieve the Initdata string content from the security_info of the
Configuration. Based on the Protection Platform type, calculate the
digest of the Initdata. Write the Initdata content to the block
device. Subsequently, construct the BlockConfig based on this block
device information.
Signed-off-by: alex.lyn <alex.lyn@antgroup.com>
To correctly manage initdata as a block device, a new InitData
Resource type, inherently a block device, has been introduced
within the ResourceManager. As a component of the Sandbox's
resources, this InitData Resource needs to be appropriately
handled by the Device Manager's handler.
Signed-off-by: alex.lyn <alex.lyn@antgroup.com>
This commit implements the retrieval and processing of InitData provided
via a Pod annotation. Specifically, it enables runtime-rs to:
(1) Parse the "io.katacontainers.config.hypervisor.cc_init_data"
annotation from the Pod YAML.
(2) Perform reverse operations on the annotation value: base64 decoding
followed by gzip decompression.
(3) Deserialize the decompressed data into the internal InitData
structure.
(4) Serialize the resulting InitData into a string and store it in the
Configuration.
This allows users to inject configuration data into the TEE Guest by
encoding and compressing it and passing it as an annotation in the Pod
configuration. This mechanism supports scenarios where dynamic config
is required for Confidential Containers.
Signed-off-by: alex.lyn <alex.lyn@antgroup.com>
This commit introduces the Initdata Spec and the logic for
calculating its digest. It includes:
(1) Define a `ProtectedPlatform` enum to represent major TEE platform
types.
(2) Create an `InitData` struct to support building and serializing
initialization data in TOML format.
(3) Implement adaptation for SHA-256, SHA-384, and SHA-512 digest
algorithms.
(4) Provide a platform-specific mechanism for adjusting digest lengths
(zero-padding).
(5) Supporting the decoding and verification of base64+gzip encoded
Initdata.
The core functionality ensures the integrity of data injected by the
host through trusted algorithms, while also accommodating the
measurement requirements of different TEE platforms.
Signed-off-by: alex.lyn <alex.lyn@antgroup.com>
This commit introduces a new `initdata` field of type String to
hypervisor `SecurityInfo`.
In accordance with the Initdata Specification, this field will
facilitate the injection of well-defined data from an untrusted host
into the TEE. To ensure the integrity of this injected data, the TEE
evidence's hostdata capability or the (v)TPM dynamic measurement
capability will be leveraged, as outlined in the specification.
Signed-off-by: alex.lyn <alex.lyn@antgroup.com>
Don't use local launched_pods variable in test_rc_policy(), because
teardown() needs to use this variable to print a description of the
pods, for debugging purposes.
Signed-off-by: Dan Mihai <dmihai@microsoft.com>
The locking mechanism around the layers cache file was insufficient to
prevent corruption of the file. This commit moves the layers cache's
management in-memory, only reading the cache file once at the beginning
of `genpolicy`, and only writing to it once, at the end of `genpolicy`.
In the case that obtaining a lock on the cache file fails,
reading/writing to it is skipped, and the cache is not used/persisted.
Signed-off-by: charludo <git@charlotteharludo.com>
`vmm-sys-util` was duplicated while updating the `ignore` list of
`rust-vmm` crates in #11431, remove duplicated one and sort the list.
Signed-off-by: Ruoqing He <heruoqing@iscas.ac.cn>
When moving from clap v2 to v4 a bunch of
functions have been removed, so update the code
to handle these replacements
Signed-off-by: stevenhorsman <steven@uk.ibm.com>
When moving from clap v2 to v4 a bunch of
functions have been removed, so update the code
to handle these replacements
Signed-off-by: stevenhorsman <steven@uk.ibm.com>
Update dependabot ignore list in cargo ecosystem to ignore upgrades from
rust-vmm crates, since those crates need to be managed carefully and
manually.
Signed-off-by: Ruoqing He <heruoqing@iscas.ac.cn>
Pin Github owned actions to specific hashes as recommended
as tags are mutable see https://pin-gh-actions.kammel.dev/.
This one of the recommendations that scorecard gives us.
Note this was generated with `frizbee actions`
Signed-off-by: stevenhorsman <steven@uk.ibm.com>
Fedora 40 is EoL, and I've seen the registry pull fail
a few times recently, so let's bump to fedora 42 which
has 10 months of support left.
Signed-off-by: stevenhorsman <steven@uk.ibm.com>
Now we are decoupled from the image-rs crate,
we can bump the protobuf version across our project
to resolve the GHSA-2gh3-rmm4-6rq5 advisory
Signed-off-by: stevenhorsman <steven@uk.ibm.com>
This patch updates the container image for the CI test workloads:
- `k8s-layered-sc-deployment.yaml`
- `k8s-pod-sc-deployment.yaml`
- `k8s-pod-sc-nobodyupdate-deployment.yaml`
- `k8s-pod-sc-supplementalgroups-deployment.yaml`
- `k8s-policy-deployment.yaml`
Also updates unit tests:
- `test_create_container_security_context`
- `test_create_container_security_context_supplemental_groups`
This fixes tests failing due to an image pull error as the previous image is no longer available in
the container registry.
Signed-off-by: Archana Choudhary <archana1@microsoft.com>
Signed-off-by: Saul Paredes <saulparedes@microsoft.com>
After commit a3f973db3b merged, protection::GuestProtection::[Snp,Sev]
have changed to tuple variants, and can no longer be used in assert_eq
marco without tuple values, or some errors will raised:
```
assert_eq!(actual.unwrap(), GuestProtection::Snp);
| ^^^^^^^^^^^^^^^^^^^^ expected \
`GuestProtection`, found enum constructor
```
Signed-off-by: Lei Liu <liulei.pt@bytedance.com>
# your codebase is analyzed, see https://docs.github.com/en/code-security/code-scanning/creating-an-advanced-setup-for-code-scanning/codeql-code-scanning-for-compiled-languages
Some files were not shown because too many files have changed in this diff
Show More
Reference in New Issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
