Automatic merge from submit-queue
hack/e2e.go: listen for Interrupt signal and attempt cleanup if run with --down
<!-- Thanks for sending a pull request! Here are some tips for you:
1. If this is your first time, read our contributor guidelines https://github.com/kubernetes/kubernetes/blob/master/CONTRIBUTING.md and developer guide https://github.com/kubernetes/kubernetes/blob/master/docs/devel/development.md
2. If you want *faster* PR reviews, read how: https://github.com/kubernetes/kubernetes/blob/master/docs/devel/faster_reviews.md
3. Follow the instructions for writing a release note: https://github.com/kubernetes/kubernetes/blob/master/docs/devel/pull-requests.md#release-notes
-->
**What this PR does / why we need it**: adds a listener on ^C, so if `hack/e2e.go` is run with `--down` and the user ^C, then it will attempt to cleanup the resources.
**Which issue this PR fixes** *(optional, in `fixes #<issue number>(, #<issue_number>, ...)` format, will close that issue when PR gets merged)*: fixes #
**Special notes for your reviewer**:
**Release note**:
<!-- Steps to write your release note:
1. Use the release-note-* labels to set the release note state (if you have access)
2. Enter your extended release note in the below block; leaving it blank means using the PR title as the release note. If no release note is required, just write `NONE`.
-->
```release-note
NONE
```
Signed-off-by: Jess Frazelle <me@jessfraz.com>
Automatic merge from submit-queue
refactor controller as posthook when configured and enabled
builds on https://github.com/kubernetes/kubernetes/pull/33785 .
Models the bootstrap controller as a PostHook which is added when its API group is available and its configured.
@liggitt Stefan is out for a while.
Automatic merge from submit-queue
Match GroupVersionKind against specific version
Currently when multiple GVK match a specific kind in `KindForGroupVersionKinds` only the first will be matched, which not necessarily will be the correct one. I'm proposing to extend this to pick the best match, instead.
Here's my problematic use-case, of course it involves ScheduledJobs 😉:
I have a `GroupVersions` with `batch/v1` and `batch/v2alpha1` in that order. I'm calling `KindForGroupVersionKinds` with kind `batch/v2alpha1 ScheduledJob` and that currently results this matching first `GroupVersion`, instead of picking more concrete one. There's a [clear description](ee77d4e6ca/pkg/api/unversioned/group_version.go (L183)) why it is on single `GroupVersion`, but `GroupVersions` should pick this more carefully.
@deads2k this is your baby, wdyt?
Automatic merge from submit-queue
[Part 1] Implementation of equivalence pod
Part 1 of #30844
This PR:
- Refactored `predicate.go`, so that `GetResourceRequest` can be used in other places to `GetEquivalencePod`.
- Implement a `equivalence_cache.go` to deal with all information we need to calculate an equivalent pod.
- Define and register a `RegisterGetEquivalencePodFunction `.
Work in next PR:
- The update of `equivalence_cache.go`
- Unit test
- Integration/e2e test
I think we can begin from the `equivalence_cache.go`? Thanks. cc @wojtek-t @davidopp
If I missed any other necessary part, please point it out.
Automatic merge from submit-queue
Update documentation for running e2e tests locally
**What this PR does / why we need it**:
The docs for running e2e tests locally needs to be updated.
check_node_count option has been removed and developers usually
need to perform additional steps do get it going.
Automatic merge from submit-queue
Generate and store federation OpenAPI spec in source tree
A follow up of #33628 to also add federation spec to source tree.
Automatic merge from submit-queue
Add sandbox gc minage
Fixes https://github.com/kubernetes/kubernetes/issues/34272.
Fixes https://github.com/kubernetes/kubernetes/issues/33984.
This PR:
1) Change the `GetPodStatus` to get statuses of all containers in a pod instead of only containers belonging to existing sandboxes. This is because sandbox may be removed by GC or by users, kubelet should be able to deal with this case.
2) Change the CRI comment to clarify the timestamp unit (nanosecond).
2) Add MinAge for sandbox GC Policy.
@yujuhong @feiskyer @yifan-gu
/cc @kubernetes/sig-node
Automatic merge from submit-queue
Juju automated charm testing shouldn't bootstrap
**What this PR does / why we need it**:
**Special notes for your reviewer**: This controls the tooling around our test automation. This is a low impact change to the k8s codebase, that will have a big impact on our CI infrastructure.
**Release note**:
```release-note
release-note-none
```
Juju bootstrapping is an act of cost. This should be an explicit action
by the tooling surrounding bundle-tester when testing a charm. Setting
bootstrap:false will allow us to get faster feedback at lower cost when
running the kubernetes charm under ci.
Automatic merge from submit-queue
Check for rsync and give friendlier message
Fixes#34300.
Not sure if #34309 is the same issue. Hopefully it is the same issue.
Automatic merge from submit-queue
controller: save older revisions for Deployment's replica sets
@jwforres the only usable way I could find for multiple old revisions for a single replica set is to stuff them as comma-separated values.
@kubernetes/deployment this retains old revisions served by a replica set inside an annotation.
Fixes https://github.com/kubernetes/kubernetes/issues/33844
Automatic merge from submit-queue
Fix confusing log messages
While debugging https://github.com/kubernetes/kubernetes/issues/33876 , I noticed following confusing message:
```
The status of Pod kibana-logging-v1-j99la is Running, waiting for it to be either Running or Failed
```
Automatic merge from submit-queue
annotate some addtional errors in e2e tests
<!-- Thanks for sending a pull request! Here are some tips for you:
1. If this is your first time, read our contributor guidelines https://github.com/kubernetes/kubernetes/blob/master/CONTRIBUTING.md and developer guide https://github.com/kubernetes/kubernetes/blob/master/docs/devel/development.md
2. If you want *faster* PR reviews, read how: https://github.com/kubernetes/kubernetes/blob/master/docs/devel/faster_reviews.md
3. Follow the instructions for writing a release note: https://github.com/kubernetes/kubernetes/blob/master/docs/devel/pull-requests.md#release-notes
-->
**What this PR does / why we need it**:
Adds some additional context to e2e test failures.
**Which issue this PR fixes** *(optional, in `fixes #<issue number>(, #<issue_number>, ...)` format, will close that issue when PR gets merged)*: some work toward #34059
**Special notes for your reviewer**: I didn't want to go through all of the offending cases so I picked off a few files and addressed those.
**Release note**:
<!-- Steps to write your release note:
1. Use the release-note-* labels to set the release note state (if you have access)
2. Enter your extended release note in the below block; leaving it blank means using the PR title as the release note. If no release note is required, just write `NONE`.
-->
```release-note
NONE
```
Automatic merge from submit-queue
user-parameter support for API_BIND_ADDRESS in local-up-cluster.sh
**What this PR does / why we need it**:
Fixes#34262.
user-parameter for the secure api bind address when running a local dev cluster.
Default bind-address is `0.0.0.0` if not specified by the user. I'm guessing this was the intended behaviour of the original code.
Allow to reach the secure API on different interfaces/IPs when running a dev local-up-cluster.
Automatic merge from submit-queue
Make kubectl label and annotate more consistent
**What this PR does / why we need it**:
This makes the label and annotate cmd files more consistent which should help with code maintenance.
Some of the main changes:
- add dryrun to annotate (can push this in a different PR if requested)
- use Complete(), Validate() and RunX()
- don't place dynamic variables in the options (only user options and args)
- call the NewBuilder() in the Run function.
**Which issue this PR fixes**
fixes#34151
**Special notes for your reviewer**:
Note: you *can* now diff the two files and the changes make sense.
**Release note**:
```release-note
kubectl annotate now supports --dry-run
```
Automatic merge from submit-queue
kubeadm: mark etcd flags as deprecated
Lets mark flags that we don't plan on exposing through the command line permanently as deprecated from now on.
@kubernetes/sig-cluster-lifecycle
Automatic merge from submit-queue
kubectl: Add external ip information to node when '-o wide' is used
<!-- Thanks for sending a pull request! Here are some tips for you:
1. If this is your first time, read our contributor guidelines https://github.com/kubernetes/kubernetes/blob/master/CONTRIBUTING.md and developer guide https://github.com/kubernetes/kubernetes/blob/master/docs/devel/development.md
2. If you want *faster* PR reviews, read how: https://github.com/kubernetes/kubernetes/blob/master/docs/devel/faster_reviews.md
3. Follow the instructions for writing a release note: https://github.com/kubernetes/kubernetes/blob/master/docs/devel/pull-requests.md#release-notes
-->
**Which issue this PR fixes**: fixes#33457
**Special notes for your reviewer**:
1. Is it possible to expose multiple external ips on the node?
2. Should this be supported or first one be taken like now?
3. Should more node address types be shown?
I'll add tests if solution is approved.
**Release note**:
<!-- Steps to write your release note:
1. Use the release-note-* labels to set the release note state (if you have access)
2. Enter your extended release note in the below block; leaving it blank means using the PR title as the release note. If no release note is required, just write `NONE`.
-->
```release-note
kubectl: Add external ip information to node when '-o wide' is used
```
Automatic merge from submit-queue
remove testapi.Default.GroupVersion
I'm going to try to take this as a series of mechanicals. This removes `testapi.Default.GroupVersion()` and replaces it with `registered.GroupOrDie(api.GroupName).GroupVersion`.
@caesarxuchao I'm trying to see how much of `pkg/api/testapi` I can remove.
Automatic merge from submit-queue
OpenStack LBaaSV2: EnsureLoadBalancer now updates instead of recreates existing LBs
<!-- Thanks for sending a pull request! Here are some tips for you:
1. If this is your first time, read our contributor guidelines https://github.com/kubernetes/kubernetes/blob/master/CONTRIBUTING.md and developer guide https://github.com/kubernetes/kubernetes/blob/master/docs/devel/development.md
2. If you want *faster* PR reviews, read how: https://github.com/kubernetes/kubernetes/blob/master/docs/devel/faster_reviews.md
3. Follow the instructions for writing a release note: https://github.com/kubernetes/kubernetes/blob/master/docs/devel/pull-requests.md#release-notes
-->
**What this PR does / why we need it**: Current LBaaSV2 integration recreates existing LBs and causes service downtime and floating ip rotation. New implementation updates LBs without service downtime or any ip rotation.
**Which issue this PR fixes** *(optional, in `fixes #<issue number>(, #<issue_number>, ...)` format, will close that issue when PR gets merged)*: fixes#32794
**Special notes for your reviewer**: I really need this before we can move to production with kubernetes. Getting this to v1.4 would be really great. I have performed plenty of testing; lb and listener creation, port changing and listener update, multiple listeners for multi-port LBs, and deletion. Seems to work flawlessly.
**Release note**:
<!-- Steps to write your release note:
1. Use the release-note-* labels to set the release note state (if you have access)
2. Enter your extended release note in the below block; leaving it blank means using the PR title as the release note. If no release note is required, just write `NONE`.
-->
```release-note
```
Automatic merge from submit-queue
Create a get-kube-binaries script to download client/server tarballs
**What this PR does / why we need it**:
One step towards removing all server and client binary tarballs from the kubernetes.tar.gz release tarball.
If someone uses `cluster/get-kube.sh` (or https://get.k8s.io, which needs to be synced), this will automatically download the necessary client and server tarballs as part of the flow, though as of right now this will largely be a no-op. (When we remove the client/server binaries, it will have more of an effect.)
I've opted to put this script inside the release tarball (rather than in get-kube.sh), since each release probably has a better idea which platforms/architectures/etc it supports.
Further improvements would probably include omitting downloading the server tarball entirely unless needed, but this seems like a reasonable first step.
This also fixes some errors in get-kube.sh, and remove client architectures we don't officially support.
**Which issue this PR fixes** *(optional, in `fixes #<issue number>(, #<issue_number>, ...)` format, will close that issue when PR gets merged)*: fixes #
x-ref #28629 and #28435
**Special notes for your reviewer**
Assigning to Tim semi-arbitrarily for now, but please reassign as you feel appropriate.
**Release note**:
We probably don't need a release note yet. We'll definitely want one when we remove the server and client binaries.
cc @jbeda @luxas @david-mcmahon @zmerlynn @gajju26
Automatic merge from submit-queue
Removing the Storage plugin from the juju cluster master.json manifest file
**What this PR does / why we need it**: The Juju cluster fails to bring up the apiserver. Using the docker logs I see the API server complaining about a fatal error.
```
F0830 17:04:16.922997 1 plugins.go:143] Unknown admission plugin: DefaultStorageClass
```
**Which issue this PR fixes** : fixes#31726
**Special notes for your reviewer**: This is specifically for the Juju cluster provider.
**Release note**:
```
release-note-none
```
Automatic merge from submit-queue
Add cgroup-driver and cgroups-per-qos flags to kubelet
Add the flags needed to support pod-level cgroups to kubelet.
/cc @vishh @dchen1107 @dubstack
Automatic merge from submit-queue
Update GCI_VERSION to gci-dev-55-8866-0-0
Update GCI base image:
Change log:
* Built-in kubernetes updated to v1.4.0
* Enabled VXLAN and IP_SET config options in kernel to support some networking tools
* OpenSSL CVE fixes
```release-note
Update GCI base image:
* Enabled VXLAN and IP_SET config options in kernel to support some networking tools (ebtools)
* OpenSSL CVE fixes
```
cc/ @kubernetes/goog-image cc/ @dchen1107
