The command module provides interfaces to find a command
intance, register handler for specified command, dispatch
command and invoke related handler.
find_command: find a command instance by name.
register_command_handler: register the handler for one
command instance.
dispatch_command_handlers: dispatch the command and invoke
registered handler.
v1-->v2:
Only support single handler for one command instance.
v2-->v3:
Remove command id.
Add error check to avoid regiter handler to command
instance which has handler.
Update the second parameter type of register_command_handler
to avoid unnecessary type conversion.
Tracked-On: #5921
Signed-off-by: Xiangyang Wu <xiangyang.wu@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
The socket module is to provide interfaces below, the unix domain
socket can be created by command monitor for the communication
between DM instance and libvirt daemon or kata container:
init_socket: allocate a new socket instance according to socket path
deinit_socket: free a socket instance
open_socket: open one unix domain socket server, initialize a
socket, create one thread to listen to client, another thread to
poll message from client.
close_socket: close one unix domain socket server
find_socket_client: find socket client instance according to fd
write_socket_char: send message through unix domain socket server
v1--v2:
Update some log message format and copyright format.
v2-->v3:
Update SOCKET_MAX_CLIENT to 1H since the socket instance of
command monitor only have one client (libvirt or kata container).
Tracked-On: #5921
Signed-off-by: Xiangyang Wu <xiangyang.wu@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
Enable `lapic_pt` automatically for rtvm for better performance.
Reserve `--lapic_pt` for future use. If VM is not in realtime mode,
`--lapic_pt` will cause a warning.
Tracked-On: #6690
Signed-off-by: Yuanyuan Zhao <yuanyuan.zhao@linux.intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
This API depends on GET_PLATFORM_INFO ioctl command,
which will not be supported from ACRN HSM anymore.
This patch removes the definition of it and
also cleans related data structure.
Tracked-On: #6690
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
Cpu affinty was set by pcpu id which can't be obtained
explictly by user. Use lapic id instead which can be easily
read from `/proc/cpuinfo` as `apicid`.
Tracked-On: #6690
Signed-off-by: Yuanyuan Zhao <yuanyuan.zhao@linux.intel.com>
Acked-by: Wang Yu1 <yu1.wang@intel.com>
The GET_PLATFORM_INFO will be removed from hypervisor. The acrn-dm can
only refer to Service VM's resources from now, all the resources out of
Service VM are not awared by acrn-dm. The original info got from
GET_PLATFORM_INFO needs to changed to Service VM's perspective like lapic id.
The pcpu_id is the index of lapic instance in MADT table. This patch
parses the Service VM's MADT table to convert the pcpu_id to lapic_id instead
of GET_PLATFORM_INFO.
Tracked-On: #6690
Signed-off-by: Yuanyuan Zhao <yuanyuan.zhao@linux.intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
fix bug: if PTM-CAP device, like TSN in multi-hostbridge could cause
acrn-dm crash.
original PTM PCI code has not handled multi-hostbridge case, and just
handled hostbridge (00:00.0) case.
this patch calls PCI access API to handle PTM-CAP device/bridge
(root port) structure, to avoid scan PCI hierarchical.
Tracked-On: #7045
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
Reviewed-by: Fei Li <fei1.li@intel.com>
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
As a parameter of acrn-dm,the mac_seed is only used for virtio-net.
So this patch change it to the sub-parameter of virtio-net.
Tracked-On: #6690
Acked-by: Yu1 Wang <yu1.wang@intel.com>
Signed-off-by: Chenli Wei <chenli.wei@linux.intel.com>
Rename '--virtio_msix' to '--virtio_msi' for this param
means 'force virtio to use singel-vector MSI'.
`-W` is the short version of `--virtio_msi`. But it's
confusing that `-W` and `--virtio_msi` are irrelevant literally.
So remove the short version `W` to prompt user friendliness.
Tracked-On: #6690
Signed-off-by: Yuanyuan Zhao <yuanyuan.zhao@linux.intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
Dynamic parameter '-A' means to generate acpi table in dm.
Few scenario use dm without '-A'. So remove it, and always
generate apci table automatically.
Tracked-On: #6690
Signed-off-by: Yuanyuan Zhao <yuanyuan.zhao@linux.intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
Hook ssram init && de-init functions to vdev
devices lifecycle management:
1) initialize ssram when vdev devices
are initialized.
2) de-initialize ssram when vdev devices
are reset or destroyed.
notes:
ssram configuration data can be released only when
user VM shutdown, hence it can't be done in deinit_vssram().
- VM reboot:
do deinit_vssram() only.
- VM shutdown:
do both deinit_vssram() and clean_vssram_config().
Tracked-On: #7010
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Acked-by: Wang Yu1 <yu1.wang@intel.com>
1) With this patch, '--ssram' option is updated to enable
vSSRAM feature support for ACRN user VMs.
'--ssram' argument of Device Model shall follow below format:
--ssram {Ln,vcpu=vcpu_set,size=nK|M;}
example:
--ssram L2,vcpu=0,1,size=4K;L2,vcpu=2,3,size=1M;L3,vcpu=all,size=2M
2) define data structure and variable
to store the configuration data for later processing.
3) add new API to cleanup configuration data when VM shutdown.
Tracked-On: #7010
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Acked-by: Wang Yu1 <yu1.wang@intel.com>
virtual RTCT will be created on TCC driver interface, instead of
pass-through native RTCT to ACRN user VMs.
this patch removes dependency on native RTCT table:
- rename build_vrtct() function to init_ssram()
and minor changes inside.
- drop function create_and_inject_vrtct()
- add one API to get virtual RTCT table.
- rename variable 'pt_rtct' to 'ssram'
Tracked-On: #7010
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Acked-by: Wang Yu1 <yu1.wang@intel.com>
Rename them to unify the coding style or for simplification
purpose, also remove redundant function declearations
in pci_core.h header file.
v4 update:
SSRAM* -> VSSRAM*
ssram* -> vssram*
Tracked-On: #7010
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Acked-by: Wang Yu1 <yu1.wang@intel.com>
guest ssram will be virtualized based on tcc driver interface,
instead of pass-thru native rtct, rename its source files to
avoid confusing:
- rename:
rtct.c -> vssram.c
rtct.h -> vssram.h
- move rtct.c from platform/acpci/ to platform/
- new directory 'vssram' to hold vssram source files.
Tracked-On: #7010
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Acked-by: Wang Yu1 <yu1.wang@intel.com>
The following parameters have not used by new design:
1. --vsbl <vsbl_file_path>
2. --part_info <part_info_name>
3. -G, --gvtargs <GVT_args>
4. -s <slot>,pci-gvt
5. -Y, --mptgen
6. -s <slot>,virtio-hdcp
7. -s <slot>,npk
8. -s <slot>,virtio-coreu
9. -i, --ioc_node <ioc_mediator_parameters>
10. --pm_by_vuart [pty|tty],<node_path>
11. --pm_notify_channel <channel>
This patch remove these parameters from usage and comment in code to
explain they are all obsoleted now.
Tracked-On: #6690
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
Signed-off-by: Chenli Wei <chenli.wei@linux.intel.com>
fix memory leakage issue in function 'acrn_parse_cpu_affinity()',
memory pointed by 'cp' is not released before function return.
Tracked-On: #6919
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
If a file descriptor being monitored by epoll_wait is closed
in another thread, the result is unspecified. So add all mevents
removed in other threads to delete list. And drain the list in
the dispatch mevent thread.
Tracked-On: #6877
Signed-off-by: Yuanyuan Zhao <yuanyuan.zhao@linux.intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
The UUID has several usages before:
1, For HV to identify the static VM configuration of post-launched VM.
2, Seed virtualization.
3, Slightly prevent launching malicous VM from SOS as lack of secure
boot.
The UUID is confused to user, user don't understand what it is. And user
don't know where to get/apply the UUID. The worst experience is user
can't launch any VMs w/o re-compile the hv. Everything needs to be
static decided in building phase.
Now we decide to remove UUID and split each usage. For 1st usage, use
vmname as the identifier of static VM configuration. For 2nd one, we
will use --vseed as the new parameter. For 3rd one, will pretect by
SOS's dm-verity.
This patch will remove the UUID parameter and support 1st&3rd usages
from DM part. For 2nd usage, another patch will be submitted later.
Tracked-On: #6685
Signed-off-by: Yuanyuan Zhao <yuanyuan.zhao@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
Rename uos_rpmb_size to user_vm_rpmb_size.
rename get_uos_count to get_user_vm_count.
rename get_uos_id to get_user_vmid.
rename uos_id to user_vmid.
Tracked-On: #6744
Signed-off-by: Liu Long <long.liu@linux.intel.com>
Reviewed-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
Rename SOS_VM_NUM to SERVICE_VM_NUM.
rename SOS_SOCKET_PORT to SERVICE_VM_SOCKET_PORT.
rename PROCESS_RUN_IN_SOS to PROCESS_RUN_IN_SERVICE_VM.
rename PCI_DEV_TYPE_SOSEMUL to PCI_DEV_TYPE_SERVICE_VM_EMUL.
rename SHUTDOWN_REQ_FROM_SOS to SHUTDOWN_REQ_FROM_SERVICE_VM.
rename PROCESS_RUN_IN_SOS to PROCESS_RUN_IN_SERVICE_VM.
rename SHUTDOWN_REQ_FROM_UOS to SHUTDOWN_REQ_FROM_USER_VM.
rename UOS_SOCKET_PORT to USER_VM_SOCKET_PORT.
rename SOS_CONSOLE to SERVICE_VM_OS_CONSOLE.
rename SOS_LCS_SOCK to SERVICE_VM_LCS_SOCK.
rename SOS_VM_BOOTARGS to SERVICE_VM_OS_BOOTARGS.
rename SOS_ROOTFS to SERVICE_VM_ROOTFS.
rename SOS_IDLE to SERVICE_VM_IDLE.
rename SEVERITY_SOS to SEVERITY_SERVICE_VM.
rename SOS_VM_UUID to SERVICE_VM_UUID.
rename SOS_REQ to SERVICE_VM_REQ.
rename RTCT_NATIVE_FILE_PATH_IN_SOS to RTCT_NATIVE_FILE_PATH_IN_SERVICE_VM.
rename CBC_REQ_T_UOS_ACTIVE to CBC_REQ_T_USER_VM_ACTIVE.
rename CBC_REQ_T_UOS_INACTIVE to CBC_REQ_T_USER_VM_INACTIV.
rename uos_active to user_vm_active.
Tracked-On: #6744
Signed-off-by: Liu Long <long.liu@linux.intel.com>
Reviewed-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
This patch refines the ACPI device passthrough framework by defining a
generic framework. Note that when user gives an HID by "--acpidev_pt
<HID>", the pt logic will go through all registered ops to see if
there's a match.
v4 -> v5:
parse_pt_acpidev/parse_pt_mmiodev -> create_pt_acpidev/create_pt_mmiodev
(there were already "init_xxx" function present, so rename to
create_xxx)
"super user" -> "superuser"
multiple API renames
Tracked-On: #6686
Signed-off-by: Yifan Liu <yifan1.liu@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
When a platform reboots or shuts down, the contents of RAM are not immediately
lost but begins to decay. During this period, there is a short timeframe during
which an attacker can turn the platform back on to boot into a program that
dumps the contents of memory (e.g., cold boot attacks). Encryption keys and
other secrets can be easily compromised through this method.
We already erasing the guest memory data when the guest is shut down normally.
However, if the guest is shut down abnormally, the contents of RAM may still
there. This patch mitigate this kind reset attack for a DM launched VM by
erasing the guest memory data by the guest has been created.
Tracked-On: #6061
Signed-off-by: Li Fei1 <fei1.li@intel.com>
vm_config size can be calced by platform_info.sw.max_vms *
platform_info.sw.vm_config_size.
Change vm_get_config() to call IOCTL ACRN_IOCTL_GET_PLATFORM_INFO
twice, first to get platform_info, second to get the vm_configs
content.
Tracked-On: #6282
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
IC_ADD_HV_VDEV -> ACRN_IOCTL_CREATE_VDEV
IC_REMOVE_HV_VDEV -> ACRN_IOCTL_DESTROY_VDEV
struct acrn_emul_dev -> struct acrn_vdev
Also, move struct acrn_vdev to acrn_common.h as this structure is used
by both DM and HV.
Tracked-On: #6282
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
IC_ASSIGN_MMIODEV -> ACRN_IOCTL_ASSIGN_MMIODEV
IC_DEASSIGN_MMIODEV -> ACRN_IOCTL_DEASSIGN_MMIODEV
struct acrn_mmiodev has slight change. Move struct acrn_mmiodev into
acrn_common.h because it is used by both DM and HV.
Tracked-On: #6282
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
IC_ASSIGN_PCIDEV -> ACRN_IOCTL_ASSIGN_PCIDEV
IC_DEASSIGN_PCIDEV -> ACRN_IOCTL_DEASSIGN_PCIDEV
QUIRK_PTDEV -> ACRN_PTDEV_QUIRK_ASSIGN
struct acrn_assign_pcidev -> struct acrn_pcidev
Move struct acrn_pcidev into acrn_common.h because it is used by both
DM and HV.
Tracked-On: #6282
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
Negative return value of vm_create_ioreq_client is invalid. 0 is valid.
Tracked-On: #6282
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
vmm.h has some unused definitions.
Keep the useful definitions and delete vmm.h
Tracked-On: #6282
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
The hypervisor creates vCPUs for a User VM in VM creation interface. The
vm_create_vcpu() interface is not needed anymore.
Remove vm_create_vcpu() from acrn-dm.
Tracked-On: #6282
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
Interface version is not recommended in Linux kernel community. Please
check Documentation/driver-api/ioctl.rst for reasons.
Remove the unused API version check from acrn-dm.
Tracked-On: #6282
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
return value 'err' of mmio_rb_lookup() being 0 ensures
'entry' is not NULL, hence checking it before 'free(entry)'
is unnecessary.
Tracked-On: #6157
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Two utility functions are copied and adapted from hyerpervisor:
ffs64
bitmap_clear_nolock
Two public functions are provided for future use (such as for RTCTv2)
pcpuid_from_vcpuid
lapicid_from_pcpuid
Tracked-On: #6020
Reviewed-by: Wang, Yu1 <yu1.wang@intel.com>
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
This allows users to retrieve and use the requested platform_info information from hypervisor
Tracked-On: #6020
Reviewed-by: Wang, Yu1 <yu1.wang@intel.com>
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Only free rb_entry when we remove this entry from the rb tree, otherwise, a
page fault would trigger when next rb itreation would access the freed rb_entry.
Tracked-On: #6056
Signed-off-by: Li Fei1 <fei1.li@intel.com>
A user can use "--pm_notify_channel uart,allow_trigger_s5" to indicate
the User VM is allowed to trigger system S5.
"--pm_notify_channel uart" means a vuart channel will be created in the
User VM to allow communication with the VM's life_mngr. The Service VM
can then initiate S5 in the guest via its dm's monitor interface. The
additional option, "allow_trigger_s5", will create a socket connection
with the Service VM's life_mngr, allowing this VM to initiate system S5.
v1 -> v2:
- rename pm_notify_channel type to PWR_EVENT_NOTIFY_UART_TRIG_PLAT_S5
Tracked-On: #6034
Signed-off-by: Peter Fang <peter.fang@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
Add one more sanity check: If the root port has more than
one child, we won't enable PTM on the guest.
This is not necessarily an error. We flag it as
error just because we don't have this type of hw
configuration at development time thus this configuration
is not tested.
Tracked-On: #5915
Signed-off-by: Rong Liu <rong.l.liu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Unify two functions definitions/declarifications:
Update the parameters from char array to char pointer.
to fix the build issue:
probeutils.c:61:29: error: argument 1 of type 'char *' declared
as a pointer [-Werror=array-parameter=]
Initialize local variable "c" to fix build issue:
core/mevent.c:122:21: error: 'c' may be used uninitialized
[-Werror=maybe-uninitialized]
Tracked-On: #5993
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
The TPM information in ACPI table is for both VPTM and passthough TPM,
so only one TPM device is allowed.
Tracked-On: #5913
Signed-off-by: Tao Yuhong <yuhong.tao@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
ACRN didn't support dynamic memory allocation. SO it would reserve
a big page pool and use the GPA as index to get a page to do EPT
mapping. In order to save memory, we put high MMIO windows to [4G, 5G].
AFter we support dynamic page allocation for EPT mapping, we move
high MMIO windows to where it used to ([256G, 512G]) for 39 bits physical
address), we could move high memory to where is used to too ([4G, 4G +
size]).
Tracked-On: #5913
Signed-off-by: Tao Yuhong <yuhong.tao@intel.com>
Windows graphic driver obtains DSM address from in-BAR mmio register
which has passthroughed. Not like the other platforms obtained from
pci configure space register which has virtualized. GPU GuC must use
WOPCM in DSM, besides, Windows OS wants to manage DSM also. These two
reason force acrn has to keep identical mapping to avoid trap mmio
BAR to do the emulation.
Tracked-On: #5880
Signed-off-by: Peng Sun <peng.p.sun@intel.com>
Update the 'acrn-dm' usage information. It is displayed when using
'-h' or when an argument parsing error occured but was not up-to-date
with the actual implementation.
Tracked-On: #5781
Signed-off-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
- Exit main() if pm_by_vuart_init() fails
- Use SIGHUP to gracefully power off a VM if pm_monitor_loop()
encounters a failure
- Identify a closed socket as a failure in pm_monitor_loop()
Tracked-On: #5736
Signed-off-by: Peter Fang <peter.fang@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
resize vm_config buffer from 16KB to 32KB, as 16KB
is not enough on EHL platform, which will result in
crash when accessing this memory.
Tracked-On: #5649
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
GPA base of SW SRAM can't be hardcoded as physical address
of SW SRAM(HPA), as this HPA may vary on different platform.
This patch reserves a dedicated memory slot[GPA: 2G - 8M, 2G)
as SW SRAM region.
Tracked-On: #5649
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Reviewed-by: Fei Li <fei1.li@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
This patch prepares vRTCT for post-RTVM instead of
pass-thru native RTCT:
- Configurations are based on Service VM native RTCT.
- Remap vLAPIC IDs in vRTCT.
- Remap base address of SW SRAM memory regions
from HPA to GPA.
- HPA base of Software SRAM shall be parsed from PTCT
instead of hardcoding.
Tracked-On: #5649
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Reviewed-by: Fei Li <fei1.li@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
This patch add function 'vm_get_config()' to get
configuration information for current VM from hypervisor.
Tracked-On: #5649
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Reviewed-by: Fei Li <fei1.li@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
paddr_guest2host may return NULL, this patch checks the return value
to avoid null pointer dereference.
Tracked-On: #5514
Signed-off-by: Liu Long <long.liu@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
Update and light clean-up of the buit-in list of arguments from 'acrn-dm'
* Added options in the top part (list with no explanation)
* Remove a couple of arguments that are no longer valid ('vmcfg' and 'dump')
Tracked-On: #5445
Signed-off-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
In addition to a single OVMF image (OVMF.fd), split images
(OVMF_CODE.fd, OVMF_VARS.fd) can be used to facilitate VM management.
From the OVMF Whitepaper:
The variable store and the firmware executable are also available in
the build output as separate files entitled: "OVMF_VARS.fd" and
"OVMF_CODE.fd". This enables central management and updates of the
firmware executable, while each virtual machine can retain its own
variable store.
An example to launch acrn-dm with the split images:
--ovmf code=/usr/share/acrn/bios/OVMF_CODE.fd, \
vars=/usr/share/acrn/bios/OVMF_VARS.fd
v1 -> v2:
- use memory-mapped file I/O for writeback
- use fcntl to lock OVMF image files
Tracked-On: #5487
Signed-off-by: Peter Fang <peter.fang@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
Windows graphic driver obtains DSM address from in-BAR mmio register
which has passthroughed. Not like the other platforms obtained from
pci configure space register which has virtualized. So TGL has to
keep identical mapping to avoid trap mmio BAR to do the emulation.
To keep simple, this patch hardcode the TGL DSM region in vE820
table, this will cause memory waste here. In the near future, we
need refine the entire vE820 logic as it is hard to maintained
due to many reserved regions have introduced in recently.
Signed-off-by: Sun Peng <peng.p.sun@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
Tracked-On: #5461
dm: pSRAM: added a command line parameter "--psram" to enable pSRAM
support for post-launched RTVM
Added "--psram" in DM command line to enable pSRAM support for
post-launched RTVM
Tracked-On: #5330
Signed-off-by: Qian Wang <qian1.wang@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
dm: modify vE820 to adapt to pSRAM for post-launched RTVM
When pSRAM is enabled for post-launched RTVM, we add a segment in vE820 for
pSRAM, and therefore the lowmem RAM will be split into part1 and part2.
Also, code of post vE820 initialization is refined
Tracked-On: #5330
Signed-off-by: Qian Wang <qian1.wang@intel.com>
dm: vptct: add vPTCT for post-launched RTVM
We added vPTCT support for post-launched RTVM:
1. Added a function create_and_inject_vptct. Currently, we
pass-through the whole pSRAM to one RTVM, so we will also pass-
through the PTCT to the very same RTVM. This function will
read the native PTCT from SOS and inject it into post-
launched VM's vACPI.
2. Added some definitions for vPTCT.
Tracked-On: #5330
Signed-off-by: Qian Wang <qian1.wang@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
We don't reserve PCI MMIO in e820 Table, it's included in DSDT ACPI Table.
About 0xA0000 - 0x100000 entry, we don't have any ACPI Table touch this region.
So we could remove it too.
After this change, we could only pass the reserved e820 table which we must
reserve to OVMF. In this case, the OVMF could trust ACRN-DM and pass the
reserved e820 table to guest instead of dropping it.
This patch needs the corresponding modify in OVMF. Otherwise, the guest could
not boot.
Tracked-On: #4550
Signed-off-by: Li Fei1 <fei1.li@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
pm_vuart stops listening and relays the message right away if it
encounters EAGAIN during read(). This causes the messages relayed to be
fragmented.
Only relay the message when it encounters a null character or a newline
character, or when the buffer is full.
Tracked-On: #5429
Signed-off-by: Peter Fang <peter.fang@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
Fix typo error "--apicdev_pt HID" to pass through a TPM device. Fix it to
"--acpidev_pt HID"
Tracked-On: #5401
Signed-off-by: Li Fei1 <fei1.li@intel.com>
Add Null pointer check in init vq ring and add vq ring descriptor
check in case cause Nullpointer exception.
Tracked-On: #5355
Signed-off-by: Liu Long <long.liu@intel.com>
Reviewed-by: Wang, Yu1 <yu1.wang@intel.com>
Unifies the logs to pr_* interfaces instead of printf for better log management.
Tracked-On: #5267
Signed-off-by: Sun Peng <peng.p.sun@intel.com>
Reviewed-by: Chi Mingqiang <mingqiang.chi@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
Add IC_CREATE_DEVICE and IC_DESTROY_DEVICE ioctls to create and
destroy an emulated device in hypervisor
v3: change IC_CREATE_DEVICE and IC_DESTROY_DEVICE to IC_CREATE_HV_VDEV
and IC_DESTROY_HV_VDEV
Tracked-On: #4853
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
We could add MMIO device pass through by two ways:
a) If the MMIO device only has MMIO regions and no ACPI Table touched, using
"--mmiodev_pt MMIO_regions",
b) If the MMIO device touches ACPI Table, using "--acpidev_pt HID"
Now only support TPM2 MSFT0101 MMIO device pass through through launch script
using "--acpidev_pt MSFT0101". When we want to pass through the TPM2 deivce,
we would not allow to emulate the vTPM2 at the same time. This is becuase
the ACRN-DM emulate the TPM2 as MSFT0101 too. Otherwise, the VM can't boot.
Besides, we could only support one TPM2 device PT and one MMIO device PT.
For TPM2 device PT, the MMIO resources are hard-coded. For the MMIO device PT,
we could pass through the MMIO resources on the cmdline.
ToDo:
1. We may use HID to discover the MMIO regions and ACPI Table instaed of
hard-coded.
2. To identify a MMIO device only by MMIO regions.
3. To allocate virtual MMIO regions in a reserved guest MMIO regions.
Tracked-On: #5053
Signed-off-by: Li Fei1 <fei1.li@intel.com>
Add two hypercalls to support MMIO device pass through.
Tracked-On: #5053
Signed-off-by: Li Fei1 <fei1.li@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
hugetlb_lv_max will get wrong value if the HUGETLB_LV2 mount failed.
Once hugetlb_lv_max is wrong, the following code logic messes up.
Tracked-On: #4937
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
- re-arange the code to make static code analysis tool happy.
- If no valid conversion could be performed, a zero value is returned
(0L) from strtol(), so add a sanity check "isdigit(cp[0])" to ensure
that it won't unexpectedly parse CPU 0 if the string starts or ends
with the valid delimiters ',' or '-', for example:
-- cpu_affinity 1,
-- cpu_affinity ,1
Tracked-On: #4616
Signed-off-by: Zide Chen <zide.chen@intel.com>
To remove the limit of 4MB ramdisk size simply adjust layout
dynamically according to ramdisk size rounded up to a 4K boundary.
This enables ramdisk based virtual machines which tend to have
large ramdisk memory requirements (128MB and above).
Tracked-On: #4840
Signed-off-by: Helmut Buchsbaum <helmut.buchsbaum@opensource.tttech-industrial.com>
add logs for vm state transition to help
analyze some problems.
Tracked-On: #4098
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
The 'pause/continue' acrnctl cmd is never used and their action are not
defined for ACRN VMs. Devicemodel minitor doesn't need to handle these 2
msg, should be removed.
Tracked-On: #4790
Signed-off-by: Tao Yuhong <yuhong.tao@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Reviewed-by: Yan, Like <like.yan@intel.com>
Remove the 'p' argument from the list as it is now obsolete and there is no
implementation for it in the code.
Tracked-On: #4732
Signed-off-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
User has a chance to specify VCPU affinity through acrn-dm command line
argument. Examples of the command line:
3 PCPUs: 1/2/3
--cpu_affinity 1-3
5 PCPUs: 2/3/6/7/8
--cpu_affinity 2,3,6-8
8 PCPUs: 2/3/6/7/9/10/11/12
--cpu_affinity 2,3,6-7,9,10-12
The specified pCPUs must be included in the guest VM's statically
defined vm_config[].cpu_affinity_bitmap.
Tracked-On: #4616
Signed-off-by: Zide Chen <zide.chen@intel.com>
now VM state transition only allows VM_PAUSED to
VM_POWERED_OFF, this patch call vm_pause before vm_destroy
in some vm failure cases.
Tracked-On: #4320
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
1) remove state machine
2) remove retry mechanism
3) pm thread only use to transmit data,not parse detailed message.
v1-->v2:
remove delay in pm_monitor_loop
Tracked-On: #4446
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Shuo A Liu <shuo.a.liu@intel.com>
Reviewed-by: Minggui Cao <minggui.cao@intel.com>
Reviewed-by: Yuhong Tao <yuhong.tao@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
it will send shutdown command to life_mngr on SOS
after the UOS has poweroff itself
Tracked-On: #4446
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Minggui Cao <minggui.cao@intel.com>
Reviewed-by: Shuo A Liu <shuo.a.liu@intel.com>
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
when acrn-dm received shutdown command, it will call this api
to send shutdown command to life_mngr running on SOS via socket.
Tracked-On: #4446
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Minggui Cao <minggui.cao@intel.com>
Reviewed-by: Shuo A Liu <shuo.a.liu@intel.com>
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
it will send "acked" message to UOS if it receives
"shutdown" command from UOS, then wait UOS poweroff itself,
it will send shutdown to life_mngr running on SOS to
shutdown system.
Tracked-On: #4446
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Shuo A Liu <shuo.a.liu@intel.com>
Reviewed-by: Minggui Cao <minggui.cao@intel.com>
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
Change shutdown_uos_thread to pm_monitor thread,
the shutdown_uos_thread can do:
--send shutdown request to UOS
--receive acked message from UOS
the pm_monitor can do:
--send shutdown request to UOS
--receive acked message from UOS
--receive shutdown request from UOS
Tracked-On: #4446
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Minggui Cao <minggui.cao@intel.com>
Reviewed-by: Shuo A Liu <shuo.a.liu@intel.com>
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
set the attributes during pm-vuart initialization
to avoid the pm-vuart in an indefinite state.
Currently we have implemented S5 triggered by SOS,
these patch series both support S5 triggered by SOS and RTVM.
the fully steps for S5 triggered by SOS:
1) S5-Trigger: it initiates the platform shutdown actions;
it calls “acrnctl stop vmX” to do that,
and check the VM's status, power-off SOS itself.
2) acrnctl will send “stop” to “acrn-dm”
3) acrn-dm will send “shutdown” command to VMx by v-UART.
4) when life-cycle manager in VMx receives the “shutdown” command,
it will give an “acked” to acrn-dm, and then poweroff itself.
the fully steps for S5 triggered by RTVM:
1) S5-Trigger in RTVM: it initiates the platform shutdown actions;
it’ll send shutdown command for platform shutdown to
life-cycle manager
2) when life-cycle manager in RTVM receive the message,
it will send “shutdown” command to acrn-dm in SOS by v-UART.
3) when acrn-dm receives the “shutdown” command from RTVM,
it will give an “acked” to RTVM, RTVM’s life-cycle manager can
power off itself
4) acrn-dm will send “shutdown” command to its own life-cycle manager
by socket.
5) when life-cycle manager in SOS receives the “shutdown” command,
it can call “s5_trigger” script to shutdown platform.
Tracked-On: #4446
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
Reviewed-by: Minggui Cao <minggui.cao@intel.com>
Reviewed-by: Shuo A Liu <shuo.a.liu@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
Let the ACRN HV to do this in shutdown sequence. In this case, the RTVM could be
still alive if something wrong happened to cause the DM died.
Tracked-On: #4428
Signed-off-by: Li Fei1 <fei1.li@intel.com>
If the guest is RTVM, dm process exit doesn't mean RTVM is
shutdown. Only shutdown_vm in hypervisor guarantee RTVM is
shutodwn. So we should avoid touch guest memory content
from DM if the guest is RTVM.
Tracked-On: #4428
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
Now we split passthrough PCI device from DM to HV, we could remove all the passthrough
PCI device unused code.
Tracked-On: #4371
Signed-off-by: Li Fei1 <fei1.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Add assign/deassign PCI device ioctl APIs assign a PCI device from SOS to
post-launched VM or deassign a PCI device from post-launched VM to SOS. This patch
is prepared for spliting passthrough PCI device from DM to HV.
The old assign/deassign ptdev APIs will be discarded.
Tracked-On: #4371
Signed-off-by: Li Fei1 <fei1.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
gop driver and uos IGD driver will use
graphics stolen memory(gsm) when enable GVT-d.
This patch pass-thru gsm to uos gpu.
After set physical GPU gsm size 64MB in host BIOS:
Here is the steps:
(1) set gsm gpa(guest physical addrress) 0xDB000000;
(2) get gsm hpa(host physical addrress);
(3) build EPT mapping for gsm.
v1 -> v2:
* initialize the EPT mapping for passthrough GPU gsm region
in passthru_init instead of reading the BDSM config space
v2 -> v3:
* add EPT unmap when deinit
* change some micro name
Tracked-On: #4360
Signed-off-by: Junming Liu <junming.liu@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Reviewed-by: Liu XinYun <xinyun.liu@intel.com>
Reviewed-by: Shuo A Liu <shuo.a.liu@intel.com>
Reviewed-by: Wu Binbin <binbin.wu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
use acrn-dm logger function instread of perror,
this helps the stability testing log capture.
Tracked-On: #4098
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Do reset for passthrough PCI device by default when assigning it to post-launched
VM:
1. modify opt "reset" to "no_reset" -- could enable no_reset for debug only
2. remove "ptdev_no_reset" opt. It could be replaced by setting "no_reset" for
each passthrough device.
Tracked-On: #3465
Signed-off-by: Li Fei1 <fei1.li@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
This patch refactors the CMD_OPT_LAPIC_PT case branch
to explicity add the dependency of option RTVM at the
same branch, it is decoupled from the next case branch
to comply with strict code standard and improve the
code readability.
Tracked-On: #4283
Signed-off-by: Gary <gordon.king@intel.com>
The current design has the following problem:
gvt uses some pci bar regions,
but ACRN-DM isn't aware of these regions.
So ACRN-DM may allocate these regions for other pci devices,
which will result in other pci devices bar regions
overlap with gvt bar regions.
The new design is the following:
(1) ACRN-DM reads gvt bar regions
which are provided by physical gpu;
(2) ACRN-DM reserves gvt bar regions
v6 -> v7:
* use array to store reserved bar regions
* rename some struct and func
v5 -> v6:
* rename enable_gvt to gvt_enabled
* add a interface to reserve bar regions
* reserve gvt bar regions
Tracked-On: projectacrn#4005
Signed-off-by: Junming Liu <junming.liu@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Reviewed-by: Liu XinYun <xinyun.liu@intel.com>
Reviewed-by: Shuo A Liu <shuo.a.liu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
