--remove unnecessary includes
--remove unnecssary forward-declaration for 'struct vhm_request'
Tracked-On: #861
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
In "commit 6ebc22" the vPCI device initialize sequence is wrong changed. This patch
tries to revert it.
Tracked-On: #3475
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
PCI BAR physical base address will never changed. Cache it to avoid calculating
it every time when we access it.
Tracked-On: #3475
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@Intel.com>
Currently, 'flags' is defined and set but never be used
in the flow of handling i/o request after then.
Tracked-On: #861
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
In the definition of port i/o handler, struct acrn_vm * pointer
is redundant as input, as context of acrn_vm is aleady linked
in struct acrn_vcpu * by vcpu->vm, 'vm' is not required as input.
this patch removes argument '*vm' from 'io_read_fn_t' &
'io_write_fn_t', use '*vcpu' for them instead.
Tracked-On: #861
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
When assgined a PCI PTDev to post-launched VM from SOS, using a pointer to point to
the real struct pci_vdev. When post-launched VM access its PTDev configure space in
SOS address space, using this real struct pci_vdev.
Tracked-On: #3475
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Add a field (vdev_ops) in struct acrn_vm_pci_dev_config to configure a PCI CFG
operation for an emulated PCI device. Use pci_pt_dev_ops for PCI_DEV_TYPE_PTDEV
by default if there's no such configure.
Tracked-On: #3475
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Create an iommu domain for all guest in vpci_init no matter if there's a PTDev
in it.
Tracked-On: #3475
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
Reviewed-by: Dongsheng Zhang <dongsheng.x.zhang@intel.com>
Now almost the vPCI device information could be obtain from PCI device configure
in VM configure. init_vdevs could make things more easier.
And rename init_vdevs to vpci_init_vdevs, init_vdev to vpci_init_vdevs to avoid
MISRA-C violations.
Tracked-On: #3475
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
Reviewed-by: Dongsheng Zhang <dongsheng.x.zhang@intel.com>
pci_dev_config in VM configure stores all the PCI devices for a VM. Besides PT
devices, there're other type devices, like virtual host bridge. So rename ptdev
to pci_dev for these configure.
Tracked-On: #3475
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The functions always return 0 so it makes sense to make them void functions
Tracked-On: #3475
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The caller function has already done the checking to make sure the req is targeted
for the called functions, so there is no need to do the same checking in called
functions.
Remove calling of is_bar_offset() in vdev_pt_read_cfg/vdev_pt_write_cfg:
In vpci.c's vpci_read_pt_dev_cfg and vpci_write_dev_cfg, vbar_access is called
first to make sure the req is targed for vdev pt (vbar emulation) before
dispatching the request to vdev_pt_read_cfg/vdev_pt_write_cfg, so there is no
need to call is_bar_offset() again to do the same checking in vdev_pt_read_cfg/vdev_pt_write_cfg.
The same goes for msicap_access/msixcap_access
vbar_access should only check if the req is for bar access, it should not care
about whether the bar access is 4 bytes or 4 bytes aligned. The called function
vdev_pt_write_vbar will check and ignore the write access if it is not 4 bytes or 4 bytes
aligned, although this is counted as a bar access.
vdev_pt_read_vbar will check if the read access is 4 bytes or 4 bytes
aligned, although this is counted as a bar access, set read value (*val) to
-1 if the access is not 4 bytes (or aligned).
Tracked-On: #3475
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This is a followup patch to fix the coding style issue introduced
in by commit "c2d25aafb889ade954af8795df2405a94024d860":
The unmodified pointer should be defined as const
Also addressed one comments from Fei to use reversed function call
in vpci_init_pt_dev and vpci_deinit_pt_dev.
Tracked-On: #3241
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
And use vhostbridge for both SOS and pre-launched VM.
Tracked-On: #3241
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
And use the ops based operations instead of direct access vdev
specific API.
Tracked-On: #3241
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Rename vbdf to bdf for the following reasons:
Use the same coding style as struct pci_pdev, as pci_pdev uses bdf instead of pbdf
pci_vdev implies the its bdf is virtual, no need to prefix bdf with the v
prefix (redundant)
Tracked-On: #3241
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
For sos, its vbar base address is set to pbar base address (vbar gpa = pbar
hpa)
For pre-launched VMs, vbar base address is pre-assigned in vm_config
Rename vdev_pt_remap_msix_table_bar to vdev_pt_remap_msix_table_vbar and make it
a static function
Remove unused function prototye vdev_pt_remap_msix_table_bar() in vpci_priv.h
Tracked-On: #3241
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
When the SOS kernel/pre-launched OS access the 0xCF8/0xCFC, it will cause
the vm-exit and then the hypervisor tries to emulate the PCI_cfg access.
0xCF8 write: The bdf/reg is captured. cache_reg = value & (0xFF);
0xCFC-0xCFF read/write: offset = address - 0xCFC. Then cached_reg + offset is
used as the offset to access the pci_cfg.
If the aligned reg is passed in 0xCF8 register, it can work well. But when
the unaligned reg is passed in 0xCF8 register, the cached_reg + offset will cause
that the incorrect pci_cfg offset is accessed. For example:
The cached_reg = 0x02(Device_ID offset) based on the value passed from 0xCF8
offset = 2 based on 0xCFC-0xCFF address.
Then cached_reg + offset is used as the offset(PCI_CMD_REG)
In fact the unaligned reg can work well on the real HW.
So the cached_reg should be aligned to handle the unaligned reg passed in
0xCF8 reg.
Tracked-On: #3249
Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
And make other related changes accordingly:
Remove pci_pdev_enumeration_cb define
Create init_vdevs() to iterate through the pdev list and create vdev for each pdev
Export num_pci_pdev and pci_pdev_array as globals in header file
Minor cosmetic fix:
Remove trailing whitespace
Tracked-On: #3022
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
For pre-launched VMs, currently we set all vbars to 0s initially in
bar emulation code, guest OS will reprogram the bars when it sees the bars are uninited (0s).
We consider this is not the right solution, change to populate the
vbars (to non zero valid pci hole address) based on the vbar base
addresses predefined in vm_config.
Store a pointer to acrn_vm_pci_ptdev_config in struct pci_vdev
Tracked-On: #3022
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Rename vdev_pt_cfgwrite_bar to vdev_pt_write_vbar
Misra-c violation fix:
Add missing else for find_vdev()
Fix more than one exit (return) in function
vdev_pt_cfgwrite_bar/vdev_pt_write_vbar
Tracked-On: #3022
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Add @pre for some functions, and fix outdated @pre statements
Tracked-On: #3056
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Put the cfgwrite code in write_cfg() for both sos and pre-launched VMs, and
remove sharing_mode_cfgwrite() and partition_mode_cfgwrite().
Rename functions used by write_cfg():
vhostbridge_cfgwrite --> vhostbridge_write_cfg
vdev_pt_cfgwrite --> vdev_pt_write_cfg
vmsi_cfgwrite --> vmsi_write_cfg
vmsix_cfgwrite --> vmsix_write_cfg
Fix @pre for functions
Tracked-On: #3056
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
Put the cfgread code in read_cfg() for both sos and pre-launched VMs, and
remove sharing_mode_cfgread() and partition_mode_cfgread().
Rename functions used by read_cfg():
vhostbridge_cfgread --> vhostbridge_read_cfg
vdev_pt_cfgread --> vdev_pt_read_cfg
vmsi_cfgread --> vmsi_read_cfg
vmsix_cfgread --> vmsix_read_cfg
Tracked-On: #3056
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
Put the deinit code in deinit_prelaunched_vm_vpci() for both sos and pre-launched VMs, and
remove sharing_mode_vpci_deinit() and partition_mode_vpci_deinit().
Rename functions used by deinit():
vhostbridge_deinit --> deinit_vhostbridge
vmsi_deinit --> deinit_vmsi
vmsix_deinit --> deinit_vmsix
post_launched_vm_vpci_deinit --> deinit_post_launched_vm
Tracked-On: #3056
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
Put the init code in init_vdev_for_pdev for both sos and pre-launched VMs, and
remove sharing_mode_vpci_init() and partition_mode_vpci_init().
Rename functions used by init_vdev_for_pdev:
vhostbridge_init --> init_vhostbridge
vmsi_init --> init_vmsi
vmsix_init --> init_vmsix
Tracked-On: #3056
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
Currently host bridge emulation and bar emulation are only for pre-launched vms,
use is_prelaunched_vm to check if it is for pre-launched vms when calling
init/deinit/cfgread/cfgwrite, also use is_hostbridge() to check if the access if
for host bridge, so that these functions can be unified for sos and pre-launched
vm in subsequent commits.
Move is_hostbridge function to vpci_priv.h so that it can be used by multiple
files.
vhostbridge_cfgread/vhostbridge_cfgwrite: return -ENODEV if the pci cfg access is not
targeted for vhostbridge so that cfgread/cfgwrite functions can be unified for sos and
pre-launched vm in subsequent commits
Fix @pre for functions
Tracked-On: #3056
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
Rename the function to find_vdev_for_sos for the following reasons:
1. meet the <verb>_<nouns> function name guidelines
2. remove sharing_mode from the function name
Tracked-On: #3056
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
Create the init_vdev_pt() function to host bar emulation initialization code
Add design philosophy for bar emulation
Move common functions to pci.h as they are generic and can be used by other
files.
Rename is_valid_bar to is_bar_supported and keep it as a private local function
in pci_pt.c
Tracked-On: #3056
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
This is to get rid of partition mode strings in comments
Tracked-On: #3056
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Rename structure acrn_vm_type to acrn_vm_load_order as it is used to
indicate the load order instead of the VM type.
Tracked-On: #2291
Signed-off-by: Conghui Chen <conghui.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
ACRN cleans up the IOMMU domain and other data structures that
represents the state of device assigment to POST_LAUNCHED_VM. This is
with the help of hypercalls from SOS DM. Under scenarios where DM
execution can get terminated abruptly or due to bugs in DM, hypercalls
responsible for cleaning up ACRN cannot happen. This leaves ACRN
device representation/resource assignment in an incorrect state.
This patch cleans up the IOMMU resource and other data structures
upon shutdown of POST_LAUNCHED_VM.
Tracked-On: #2700
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Signed-off-by: Zide Chen <zide.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
In the presence of SOS, ACRN uses fallback_iommu_domain which is the same
used by SOS, to assign domain to devices during ACRN init. Also it uses
fallback_iommu_domain when DM requests ACRN to remove device from UOS domain.
This patch changes the design of assign/remove_iommu_device to avoid the
concept of fallback_iommu_domain and its setup. This way ACRN can commonly
treat pre-launched VMs bringup w.r.t. IOMMU domain creation.
Tracked-On: #2965
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
For pre-launched VMs MSI/MSI-x configuration writes are not intercepted by ACRN.
It is pass-thru and interrupts land in ACRN and the guest vector is injected into
the VM's vLAPIC. With this patch, ACRN intercepts MSI/MSI-x config writes and take
the code path to remap interrupt vector/APIC ID as it does for SOS/UOS.
Tracked-On: #2879
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
After using get_vm_from_vmid(), vm pointer is always not NULL. But there are still many NULL pointer checks.
This commit replaced the NULL vm pointer check with a validation check which checks the vm status.
In addition, NULL check for pointer returned by get_sos_vm() and get_vm_config() is removed.
Tracked-On: #2520
Signed-off-by: Yan, Like <like.yan@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This patch makes io_read_fn_t return true or false instead of void.
Returning true means that the handler in HV process the request completely.
Returning false means that we need to re-inject the request to DM after
processing it in HV.
Tracked-On: #2865
Signed-off-by: Kaige Fu <kaige.fu@intel.com>
This patch makes io_write_fn_t return true or false instead of void.
Returning true means that the handler in HV process the request completely.
Returning false means that we need to re-inject the request to DM after
processing it in HV.
Tracked-On: #2865
Signed-off-by: Kaige Fu <kaige.fu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Delete the 2 files and merge their code into vpci.c:
hypervisor/dm/vpci/partition_mode.c
hypervisor/dm/vpci/sharing_mode.c
And change the Makefile accordingly
Change PCI_PRIV_H_ to VPCI_PRIV_H_ in vpci_priv.h
Some misra c fix:
Add @pre for functions
Add const to function parameters
Tracked-On: #2534
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
Instead of using CONFIG_PARTITION_MODE at compile time to compile in and call
the partition mode/sharing mode specific functions, always compile in all sharing
mode and partition code, then calling the corresponding functions dynamically based
on vm type (PRE_LAUNCHED_VM and SOS_VM) at runtime.
Some misra c fix:
Add @pre for functions
Add const to function parameters
Add ASSERT in pci_cfgdata_io_read and pci_cfgdata_io_write
Tracked-On: #2534
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Do the pci cfg read/write sanity checking before the request is dispatched to
submodules, so that the checking is centralized rather than scattered across multiple
files/places
Tracked-On: #2534
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
it removes hypervisor.h and just includes needed header files.
Tracked-On: #1842
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
120D: Pointer param should be declared pointer to const.
Add 'const' qualifier to function parameters whenever it's possible:
alloc_pci_vdev()
enumerate_pci_dev()
pci_scan_bus()
pci_enumeration_cb()
partition_mode_vpci_init()
partition_mode_vpci_deinit()
sharing_mode_vpci_init()
sharing_mode_vpci_deinit()
vpci_cleanup()
45D: Pointer not checked for null before use.
Check pointer vm in vpci_reset_ptdev_intr_info() before using it.
Tracked-On: #861
Signed-off-by: Zide Chen <zide.chen@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
13X: Identifier reuse: tag vs component.
A tag name shall be a unique identifier
Change the following names:
struct msi --> struct pci_msi
struct msix --> struct pci_msix
struct vpci --> struct acrn_vpci
union cfgdata -> union pci_cfgdata
Tracked-On: #861
Signed-off-by: Zide Chen <zide.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Revert the temporary workaround of calling allow_guest_pio_access() to
reset the I/O bitmap for CF9.
For CONFIG_ADDR register, only intercept I/O port CF8 to achieve these:
- In SOS, I/O bitmap for port CF9 is not set.
- In UOS or in partition mode, I/O requests to CF9/CFA/CFB won't be handled
by pci_cfgaddr_io_read/write() any more.
Tracked-On: #1815
Signed-off-by: Zide Chen <zide.chen@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
