when DM exit, it is better to call deinit_loggers
to do some cleanup work.
Tracked-On: #3012
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
Old implementation does nothing when Stop Endpoint cmd is received,
it is not right. The new implementation will cancel all the libusb
requests in processing.
Tracked-On: #3054
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
The names for the two variables are too long, change to shorter
name. This patch doesn't change any logic, just clean up.
Tracked-On: #3054
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
The chained field could help to describe the relationship of USB
data blocks.
Tracked-On: #3054
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Save the MaxPacketSize value for every endpoint of virtual
USB device.
Tracked-On: #3054
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
If you run two acrn-dm processes at the same time,
hugetblfs will be mounted twice, which will cause a memory leak.
The specific solution is :different virtual machines mount hugetblfs
into different directories.
Tracked-On:#2854
Signed-off-by: bing.li <bingx.li@intel.com>
Reviewed-by: Minggui Cao<minggui.cao@intel.com>
Acked-by: Yin Fengwei<fengwei.yin@intel.com>
PCI spec says that the procedure of sizing a BAR is as follows:
1) disable the decode via command register
2) save the original value of BAR register
3) write all-1 to the BAR register
4) read BAR register back, calculate the size
5) restore the original value to BAR register
6) re-enable the decode via command register
Some driver does not disable the decode of BAR register via the
command register before sizing a BAR. This will lead to a overlay
of the BAR addresses when trying to register the intermediate
BAR address via register_bar. A stateful variable sizing is used
to keep track of such kind of BAR address changes and workaroud
this violation.
Currently this issue is only found when audio device is passed
through to Windows 10 guest. When it is fixed in the Windows
audio driver, this patch should be reverted.
v1 -> v2:
- change the commit message to add the procedure of BAR sizing from
PCI spec
Tracked-On: #2962
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Reviewed-by: Binbin Wu <binbin.wu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Removed the entire vmcfg feature, these changes are made:
1.Deleted devicemodel/vmcfg/
2.Deleted devicemodel/include/vmcfg.h
3.Cleanup vmcfg in devicemodel/Makefile
Tracked-On: #3192
Acked-by: Anthony Xu <anthony.xu@intel.com>
Signed-off-by: Tao Yuhong <yuhong.tao@intel.com>
Reserved 128MB memory range for EPC resource in E820 table, starting
from 0x80000000.
Need to align the base address b/t DM and HV.
For hypervisor, the base address will be specified in epc field in
vm_configurations.c
Tracked-On: #3179
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
VM Name length is restricted to 32 characters. kata creates
a VM name with GUID added as a part of VM name making it around
80 characters. So increasing this size to 128.
v1->v2:
It turns out that MAX_VM_OS_NAME_LEN usage in DM and HV are for
different use cases. So removing the macro from acrn_common.h.
Definied macro MAX_VMNAME_LEN for DM purposes in dm.h. Retaining
original macron name MAX_VM_OS_NAME_LEN for HV purposes but defined
in vm_config.h.
Tracked-On: #3138
Signed-off-by: Vijay Dhanraj <vijay.dhanraj@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Currently, we use STR_LEN for all checking the size of all the
acrn-dm parameters. But some parameters like kernel boot args
can grow based on different needs. For example, when kata launches
guest VM using acrn, the kernel boot args increases by 256 bytes
(i.e 1024 +256).
Just increasing STR_LEN will unnecessarily increase allocations
for other acrn-dm parameters. So decoupling only boot_args
length and increasing it to 2048.
PS: If other parameters like ramdisk path, kernel path,
elf_path etc. don't need 1024 bytes, we can reduce STR_LEN
to 256 or 512 bytes.
Tracked-On: #3138
Signed-off-by: Vijay Dhanraj <vijay.dhanraj@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
There are many quirks in Intel xHCI implementation and it is very hard
to debug under Microsoft Windows OS, hence use ACRN xHCI extented
capabilities as the default setting.
Tracked-On: #3163
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
This patch adds support to trigger rescan of virtio-blk device by the
guest VM. This is an alternate to hot-plugging virtio-blk device.
This feature stems from the kata requirement, which hot-plugs container
rootfs after the VM is launched.
As part of virtio-blk rescan,
1. Update the backing file for the virtio-blk device with valid file.
Basically update the empty file (with dummy bctxt) that was passed
during VM launch.
2. Update virtio-blk device configurations for udpated backing file.
3. Update size associated with valid backing file in the config space.
4. Notify guest OS, of the new config change.
5. On this notification, guest will do the following.
(i). Update virtio-blk capacity.
(ii). Revalidate the disk.
(iii). Identify the newly plugged block device.
v5 -> v6:
- Removed use of dummy file and added a new parameter "nodisk"
to virtio-blk which indicates user wants to create a virtio-blk
device with dummy backend.
- Moved vm_monitor_rescan from pci core to virtio-blk as it currently
applies to only virtio-blk.
v4 -> v5:
- Reverted back logic, so that blkrescan is only supported when
VM is launched with empty backend file.
v3 -> v4:
- Close block context before allocating a new one
- Allow backend filepath with additional options to be more generic
- Remove blank lines introduced as part of previous patches.
v2 -> v3:
- Renamed vdev ops vdev_blk rescan to vdev_rescan
- Renamed montior ops virtio_blkrescan_ops to virtio_rescan_ops
- Consolidated virtio-blk configuration specific part into
a separate function
- Removed size requirement in acrnctl command.
v1 -> v2:
- Added more comments in the code.
- Renamed APIs from displug to blkrescan, inline with acrnctl cmd.
- Split the patch into two. This corresponds to changes in acrn-dm.
Tracked-On: #3051
Signed-off-by: Vijay Dhanraj <vijay.dhanraj@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
the logger setting can be input as acrn-dm params;
so need parse it to init logger system.
Tracked-On: #3012
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Acked-by: Yin Fengwei <fengwei.yin@intel.com>
ACRN interepts vm_set/reset_ptdev_intx_info hypercalls to set
the SOS vdev properties to indicate it is assigned to UOS. Today,
upon vm_reset_ptdev_intx_info hypercall ACRN does not revert the SOS
vdev properties back to that of SOS, as vbdf and pbdf were not
part of the API. This would leave ACRN data structures in an incorrect
state
Tracked-On: #2700
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Signed-off-by: Zide Chen <zide.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Add interface to get hardware information and
configurations for current platform.
Tracked-On: #2538
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Per debugging requirement, map the watchdog reset to warm reset.
So the ramconsole could be used to capture the kernel log of UOS
before watchdog is hit.
Tracked-On: #2471
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
ACPI PM timer is disabled in FADT since there is no pm timer emulation
in device model now.
Tracked-On: #2962
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Acked-by: Yin Fengwei <fengwei.yin@intel.com>
It is found that windows will issue blkio operation with amount of
sectors in one request. This patch extends the max iov number of
virtio block to 256.
Tracked-On: #2962
Signed-off-by: Yu Wang <yu1.wang@intel.com>
Acked-by: Yin Fengwei <fengwei.yin@intel.com>
The current xHCI mediator doesn't well support disable endpoint command.
This patch is one workaround for disable endpoint command to avoid
xHCI mediator to continue handle already dropped data.
Tracked-On: #2927
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
GPIO set/get value can be operated by accessing PIO space and the PIO
register definition for GPIO is in gpio_dm.h, frontend driver or ACPI
control methods can operate GPIO based on it.
GPIO mediator also defines ACPI control methods to support GPIO
operations, GPIO consumers can invoke PIO_GPIO_SET_VALUE/PIO_GPIO_GET_VALUE
in their own DSDT to set/get one GPIO value via ACPI control method.
v2: 1) Fix code style.
2) Use virtio configuration space callbacks to implement GPIO PIO operations
that replace pci_gpio_read/pci_gpio_write with virtio_cfgread/virtio_cfgwrite.
3) Return 0xFFFFFFFF as invalid result of PIO reading instead 0.
Tracked-On: #2512
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
1. free memory during pci_xhci_dev_destroy.
2. add libusb_free_device_list to free the list of devices previously
discovered using libusb_get_device_list().
3. fix possible memory corruption.
Tracked-On: #2892
Signed-off-by: Conghui Chen <conghui.chen@intel.com>
Reviewed-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
To keep consistency between HV and DM about PM1A_CNT_ADDR,
it is better to replace the PM1A_CNT related MACROs used in DM
with VIRTUAL_PM1A_CNT related MACROs in acrn_common.h.
Tracked-On: #2865
Signed-off-by: Kaige Fu <kaige.fu@intel.com>
Acked-by: Eddie Dong <Eddie.dong@intel.com>
This patch add one new parameter --rtvm to indicate if the guest is a RTVM or not.
For RTVM, it may be not interference by SOS.
Tracked-On: #2865
Signed-off-by: Kaige Fu <kaige.fu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
