For pass-thru dev PIO bar,ensure it's identical mapping
(guest PIO bar start address equals to host PIO bar start address).
Then in HV side, set the corresponding VMCS io bitmap
to pass-thru these io ports for performance.
Tracked-On: #6508
Signed-off-by: Fei Li <fei1.li@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
1. refine the name of some functions and struct
2. add the support for PIO bar reservation
Tracked-On: #6508
Signed-off-by: Liu,Junming <junming.liu@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
When destroy the usb device release the resource allocate for transfer
in case cause the memory leak issue. Add the release and cancel
transfer request call back for the emulation device, use the emulation
device call back in xHCI controller emulation.
Tracked-On: #6533
Signed-off-by: Liu Long <long.liu@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
The address of OpRegion is not 4KB aligned,
if the OpRegion + extended VBT size is 16KB,
then it will take up to 5 physical pages in host.
So update the OpRegion size to 20KB
to expose the whole OpRegion to guest.
Tracked-On: #6270
Signed-off-by: Liu,Junming <junming.liu@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
IC_ADD_HV_VDEV -> ACRN_IOCTL_CREATE_VDEV
IC_REMOVE_HV_VDEV -> ACRN_IOCTL_DESTROY_VDEV
struct acrn_emul_dev -> struct acrn_vdev
Also, move struct acrn_vdev to acrn_common.h as this structure is used
by both DM and HV.
Tracked-On: #6282
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
IC_ASSIGN_MMIODEV -> ACRN_IOCTL_ASSIGN_MMIODEV
IC_DEASSIGN_MMIODEV -> ACRN_IOCTL_DEASSIGN_MMIODEV
struct acrn_mmiodev has slight change. Move struct acrn_mmiodev into
acrn_common.h because it is used by both DM and HV.
Tracked-On: #6282
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
IC_ASSIGN_PCIDEV -> ACRN_IOCTL_ASSIGN_PCIDEV
IC_DEASSIGN_PCIDEV -> ACRN_IOCTL_DEASSIGN_PCIDEV
QUIRK_PTDEV -> ACRN_PTDEV_QUIRK_ASSIGN
struct acrn_assign_pcidev -> struct acrn_pcidev
Move struct acrn_pcidev into acrn_common.h because it is used by both
DM and HV.
Tracked-On: #6282
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
vmm.h has some unused definitions.
Keep the useful definitions and delete vmm.h
Tracked-On: #6282
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
The hypervisor creates vCPUs for a User VM in VM creation interface. The
vm_create_vcpu() interface is not needed anymore.
Remove vm_create_vcpu() from acrn-dm.
Tracked-On: #6282
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
Interface version is not recommended in Linux kernel community. Please
check Documentation/driver-api/ioctl.rst for reasons.
Remove the unused API version check from acrn-dm.
Tracked-On: #6282
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
The latest version of RTCT specification is version 2.
This patch is to add RTCT v2 support for virtual RTCT
of guest.
Tracked-On: #6020
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Emulation of guest lapic ID has been enhanced to
indicate the topology of vCPU hierarchy.
This patch refine logic to build virtual RCTC_v1 table
of guest to adapt above lapic ID changes.
Tracked-On: #6020
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Two utility functions are copied and adapted from hyerpervisor:
ffs64
bitmap_clear_nolock
Two public functions are provided for future use (such as for RTCTv2)
pcpuid_from_vcpuid
lapicid_from_pcpuid
Tracked-On: #6020
Reviewed-by: Wang, Yu1 <yu1.wang@intel.com>
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
This allows users to retrieve and use the requested platform_info information from hypervisor
Tracked-On: #6020
Reviewed-by: Wang, Yu1 <yu1.wang@intel.com>
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
A user can use "--pm_notify_channel uart,allow_trigger_s5" to indicate
the User VM is allowed to trigger system S5.
"--pm_notify_channel uart" means a vuart channel will be created in the
User VM to allow communication with the VM's life_mngr. The Service VM
can then initiate S5 in the guest via its dm's monitor interface. The
additional option, "allow_trigger_s5", will create a socket connection
with the Service VM's life_mngr, allowing this VM to initiate system S5.
v1 -> v2:
- rename pm_notify_channel type to PWR_EVENT_NOTIFY_UART_TRIG_PLAT_S5
Tracked-On: #6034
Signed-off-by: Peter Fang <peter.fang@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
Add one more sanity check: If the root port has more than
one child, we won't enable PTM on the guest.
This is not necessarily an error. We flag it as
error just because we don't have this type of hw
configuration at development time thus this configuration
is not tested.
Tracked-On: #5915
Signed-off-by: Rong Liu <rong.l.liu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
If PTM can be enabled on passthru device, a virtual root port
is added to vm to act as ptm root. And the passthru device is
connected to the virtual root port instead of the virtual host bridge.
Tracked-On: #5915
Signed-off-by: Rong Liu <rong.l.liu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
This patch probes whether hw supports ptm. It is used to check whether ptm
can be enabled on the passthru pci device. It checks whether passthru
device support PTM requestor capability, then check whether its upstream
root port support PTM root role. Errors are reported to user if sanity
check fails.
Tracked-On: #5915
Signed-off-by: Rong Liu <rong.l.liu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Add functionality to build and cache pci hierarchy, which are mainly
used to retrieve # of children of pci bridge or pci bus.
get_device_count_on_bus(): get # of child devices on a pci bus
get_device_count_on_bridge(): recursively get # of child devices on a pci bridge
scan_pci(): build and cache pci hierarchy
pci_find_root_port(): find root port of a pci device
clean_pci_cache(): free pci cache
scan_pci_test(): test of scan pci hierarchy (disabled)
Tracked-On: #5915
Signed-off-by: Rong Liu <rong.l.liu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Add a few pci utility functions to help easy access of pci
functionalities.
1. pci_find_capability(): find position of specified pci capability register
2. pci_find_ext_cap(): find extend capability register position from cap_id
3. pci_pcie_type(): find pci-e device type
4. is_root_port(): check whether pdev is a pci root port
5. is_bridge(): check whether pdev is a bridge
Tracked-On: #5915
Signed-off-by: Rong Liu <rong.l.liu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
The TPM information in ACPI table is for both VPTM and passthough TPM,
so only one TPM device is allowed.
Tracked-On: #5913
Signed-off-by: Tao Yuhong <yuhong.tao@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
The GPA of TPM device has fixed value TPM_CRB_MMIO_ADDR, remove
TPM_CRB_MMIO_ADDR and allocate GPA base for TPM device
Tracked-On: #5913
Signed-off-by: Tao Yuhong <yuhong.tao@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
The ACPI MMIO devices, like TPM, has a fixed base GPA. Sould support
GPA resource allocating for MMIO devices. GPA region
0xF0000000~0xFE000000 is not used, can allocate GPA from it.
Tracked-On: #5913
Signed-off-by: Tao Yuhong <yuhong.tao@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
There is "void deinit_mmio_devs()" in ./devicemodel/hw/mmio/core.c,
but "int deinit_mmio_devs()" in ./devicemodel/include/mmio_dev.h
Tracked-On: #5913
Signed-off-by: Tao Yuhong <yuhong.tao@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
ACRN didn't support dynamic memory allocation. SO it would reserve
a big page pool and use the GPA as index to get a page to do EPT
mapping. In order to save memory, we put high MMIO windows to [4G, 5G].
AFter we support dynamic page allocation for EPT mapping, we move
high MMIO windows to where it used to ([256G, 512G]) for 39 bits physical
address), we could move high memory to where is used to too ([4G, 4G +
size]).
Tracked-On: #5913
Signed-off-by: Tao Yuhong <yuhong.tao@intel.com>
DM maps 64-bit mmio BARs of vdev into 4G-5G, for post-launched VMs. At native
platform, 64-bit MMIO BARs which have 39-bit address, are always mapped into
256G-512G address space.
Change PCI_EMUL_MEMBASE64 to 256G, change PCI_EMUL_MEMLIMIT64 to 512G. So that
the 64-bit vdev BARs of post-launched VMs have same address space with native
platform.
Tracked-On: #5913
Signed-off-by: Tao Yuhong <yuhong.tao@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
Windows graphic driver obtains DSM address from in-BAR mmio register
which has passthroughed. Not like the other platforms obtained from
pci configure space register which has virtualized. GPU GuC must use
WOPCM in DSM, besides, Windows OS wants to manage DSM also. These two
reason force acrn has to keep identical mapping to avoid trap mmio
BAR to do the emulation.
Tracked-On: #5880
Signed-off-by: Peng Sun <peng.p.sun@intel.com>
- Exit main() if pm_by_vuart_init() fails
- Use SIGHUP to gracefully power off a VM if pm_monitor_loop()
encounters a failure
- Identify a closed socket as a failure in pm_monitor_loop()
Tracked-On: #5736
Signed-off-by: Peter Fang <peter.fang@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
Fix compilation issue when using gcc 10.x due to the "__packed"
attribute in acpi.h. Explicitly changing that to __attribute__((packed))
fixes the compilation error.
Tracked-On: #5671
Signed-off-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
GPA base of SW SRAM can't be hardcoded as physical address
of SW SRAM(HPA), as this HPA may vary on different platform.
This patch reserves a dedicated memory slot[GPA: 2G - 8M, 2G)
as SW SRAM region.
Tracked-On: #5649
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Reviewed-by: Fei Li <fei1.li@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
This patch prepares vRTCT for post-RTVM instead of
pass-thru native RTCT:
- Configurations are based on Service VM native RTCT.
- Remap vLAPIC IDs in vRTCT.
- Remap base address of SW SRAM memory regions
from HPA to GPA.
- HPA base of Software SRAM shall be parsed from PTCT
instead of hardcoding.
Tracked-On: #5649
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Reviewed-by: Fei Li <fei1.li@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
This patch add function 'vm_get_config()' to get
configuration information for current VM from hypervisor.
Tracked-On: #5649
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Reviewed-by: Fei Li <fei1.li@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
