According to SDM Vol3 11.12.10, in x2APIC mode, Logical Destination has
two parts:
- Cluster ID (LDR[31:16])
- Logical ID (LDR[15:0])
Cluster ID is a numerical address, while Logical ID is a 16bit mask. We
can only use Logical ID to address multi destinations within a Cluster.
So we can't just 'or' all the Logical Destination in LDR registers to
get one mask for all target pCPUs. This would get a wrong destination
mask if the target Destinations are from different Clusters.
For example in ADL/RPL x2APIC LDRs for core 2-5 are 0x10001 0x10100
0x20001 0x20100. If we 'or' them together, we would get a Logical
Destination of 0x30101, which points to core 6 and another core.
If core 6 is running a RTVM, then the irq is unable to get to
core 2-5, causing the guest on core 2-5 driver fail.
Guests working in xAPIC mode may use 'Flat Model' to select an
arbitrary list of CPUs as its irq destination. HV may not be able to
include them all when transfering to physical destinations, because
the HW is working in x2APIC mode and can only use 'Cluster Model'.
There would be no perfect fix for this issue. This patch is a simple
fix, by just keep the first Cluster of all target Logical Destinations.
Tracked-On: #8435
Signed-off-by: Wu Zhou <wu.zhou@intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
Modified the copyright year range in code, and corrected "int32_tel"
into "Intel" in two "hypervisor/include/debug/profiling.h" and
"hypervisor/include/debug/profiling_internal.h".
Tracked-On: #7559
Signed-off-by: Ziheng Li <ziheng.li@intel.com>
Many of the license and Intel copyright headers include the "All rights
reserved" string. It is not relevant in the context of the BSD-3-Clause
license that the code is released under. This patch removes those strings
throughout the code (hypervisor, devicemodel and misc).
Tracked-On: #7254
Signed-off-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
Secure interrupt (interrupt belongs to TEE) comes
when TEE vcpu is running, the interrupt will be
injected to TEE directly. But when REE vcpu is running
at that time, we need to switch to TEE for handling.
Non-Secure interrupt (interrupt belongs to REE) comes
when REE vcpu is running, the interrupt will be injected
to REE directly. But when TEE vcpu is running at that time,
we need to inject a predefined vector to TEE for notification
and continue to switch back to TEE for running.
To sum up, when secure interrupt comes, switch to TEE
immediately regardless of whether REE is running or not;
when non-Secure interrupt comes and TEE is running,
just notify the TEE and keep it running, TEE will switch
to REE on its own initiative after completing its work.
Tracked-On: projectacrn#6571
Signed-off-by: Jie Deng <jie.deng@intel.com>
Reviewed-by: Wang, Yu1 <yu1.wang@intel.com>
Acked-by: Eddie Dong <eddie.dong@Intel.com>
The coding guideline rules C-TY-27 and C-TY-28, combined, requires that
assignment and arithmetic operations shall be applied only on operands of the
same kind. This patch either adds explicit type casts or adjust types of
variables to align the types of operands.
The only semantic change introduced by this patch is the promotion of the
second argument of set_vmcs_bit() and clear_vmcs_bit() to
uint64_t (formerly uint32_t). This avoids clear_vmcs_bit() to accidentally
clears the upper 32 bits of the requested VMCS field.
Other than that, this patch has no semantic change. Specifically this patch
is not meant to fix buggy narrowing operations, only to make these
operations explicit.
Tracked-On: #6776
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Rename gpa_uos to gpa_user_vm
rename base_gpa_in_uos to base_gpa_in_user_vm
rename UOS_VIRT_PCI_MMCFG_BASE to USER_VM_VIRT_PCI_MMCFG_BASE
rename UOS_VIRT_PCI_MMCFG_START_BUS to USER_VM_VIRT_PCI_MMCFG_START_BUS
rename UOS_VIRT_PCI_MMCFG_END_BUS to USER_VM_VIRT_PCI_MMCFG_END_BUS
rename UOS_VIRT_PCI_MEMBASE32 to USER_VM_VIRT_PCI_MEMBASE32
rename UOS_VIRT_PCI_MEMLIMIT32 to USER_VM_VIRT_PCI_MEMLIMIT32
rename UOS_VIRT_PCI_MEMBASE64 to USER_VM_VIRT_PCI_MEMBASE64
rename UOS_VIRT_PCI_MEMLIMIT64 to USER_VM_VIRT_PCI_MEMLIMIT64
rename UOS in comments message to User VM.
Tracked-On: #6744
Signed-off-by: Liu Long <long.liu@linux.intel.com>
Reviewed-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
Rename sos_vm to service_vm.
rename sos_vmid to service_vmid.
rename sos_vm_ptr to service_vm_ptr.
rename get_sos_vm to get_service_vm.
rename sos_vm_gpa to service_vm_gpa.
rename sos_vm_e820 to service_vm_e820.
rename sos_efi_info to service_vm_efi_info.
rename sos_vm_config to service_vm_config.
rename sos_vm_hpa2gpa to service_vm_hpa2gpa.
rename vdev_in_sos to vdev_in_service_vm.
rename create_sos_vm_e820 to create_service_vm_e820.
rename sos_high64_max_ram to service_vm_high64_max_ram.
rename prepare_sos_vm_memmap to prepare_service_vm_memmap.
rename post_uos_sworld_memory to post_user_vm_sworld_memory
rename hcall_sos_offline_cpu to hcall_service_vm_offline_cpu.
rename filter_mem_from_sos_e820 to filter_mem_from_service_vm_e820.
rename create_sos_vm_efi_mmap_desc to create_service_vm_efi_mmap_desc.
rename HC_SOS_OFFLINE_CPU to HC_SERVICE_VM_OFFLINE_CPU.
rename SOS to Service VM in comments message.
Tracked-On: #6744
Signed-off-by: Liu Long <long.liu@linux.intel.com>
Reviewed-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
In local APIC passthrough case, when devices triggered a INTx interrupt, this
interrupt would be delivered to vCPU directly. For this case, need to set the
virtual vector in
the 'Interrupt Vector' field of physical IOxAPIC I/O REDIRECTION TABLE REGISTER
(bits 7:0) and 'Vector' field of vt-d Interrupt Remapping Table Entry (IRTE)
for Remapped Interrupts.
Assumption:
(a) IOAPIC pins won't be shared between LAPIC PT guest and other guests;
(b) The guest would not trigger this IRQ before it switched to x2 APIC mode.
Tracked-On: #5923
Signed-off-by: Zide Chen <zide.chen@intel.com>
Malicious input 'index' may trigger buffer
overflow on array 'irte_alloc_bitmap[]'.
This patch validate that 'index' shall be
less than 'CONFIG_MAX_IR_ENTRIES' and also
remove unnecessary check on 'index' in
'ptirq_free_irte()' function with this fix.
Tracked-On: #6132
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Instead of "#include <x86/foo.h>", use "#include <asm/foo.h>".
In other words, we are adopting the same practice in Linux kernel.
Tracked-On: #5920
Signed-off-by: Liang Yi <yi.liang@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Requires explicit arch path name in the include directive.
The config scripts was also updated to reflect this change.
Tracked-On: #5825
Signed-off-by: Peter Fang <peter.fang@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Each .c file includes the arch specific irq header file (with full
path) by itself if required.
Tracked-On: #5825
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Now, we use hash table to maintain intx irq mapping by using
the key generated from sid. So once the entry is added,we can
not update source ide any more. Otherwise, we can't locate the
entry with the key generated from new source ide.
For source id change, remove_remapping/add_remapping is used
instead of update source id directly if entry was added already.
Tracked-On: #5640
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Add the capability of forwarding specified physical IOAPIC interrupt
lines to pre-launched VMs as virtual IOAPIC interrupts. This is for the
sake of the certain MMIO pass-thru devices on EHL CRB which can support
only INTx interrupts.
Tracked-On: #5245
Signed-off-by: Toshiki Nishioka <toshiki.nishioka@intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
For a ptirq_remapping_info entry, when build IRTE:
- If the caller provides a valid IRTE, use the IRET
- If the caller doesn't provide a valid IRTE, allocate a IRET when the
entry doesn't have a valid IRTE, in this case, the IRET will be freed
when free the entry.
Tracked-On:#4831
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
idx_in:
- If the caller of dmar_assign_irte passes a valid IRTE index, it will
be resued;
- If the caller of dmar_assign_irte passes INVALID_IRTE_ID as IRTE index,
the function will allocate a new IRTE.
idx_out:
This paramter return the actual index of IRTE used. The caller need to
check whether the return value is valid or not.
Also this patch adds an internal function alloc_irte.
The function takes count as input paramter to allocate continuous IRTEs.
The count can only be 1, 2, 4, 8, 16 or 32.
This is prepared for multiple MSI vector support.
Tracked-On: #4831
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Refine find_ptirq_entry by hashing instead of walk each of the PTIRQ entries one by one.
Tracked-On: #4550
Signed-off-by: Li Fei1 <fei1.li@intel.com>
Acked-by: Eddie Dong<eddie.dong@Intel.com>
There's no need to look up MSI ptirq entry by virtual SID any more since the MSI
ptirq entry would be removed before the device is assigned to a VM.
Now the logic of MSI interrupt remap could simplify as:
1. Add the MSI interrupt remap first;
2. If step is already done, just do the remap part.
Tracked-On: #4550
Signed-off-by: Li Fei1 <fei1.li@intel.com>
Acked-by: Eddie Dong<eddie.dong@Intel.com>
Reviewed-by: Grandhi, Sainath <sainath.grandhi@intel.com>
The virtual MSI information could be included in ptirq_remapping_info structrue,
there's no need to pass another input paramater for this puepose. So we could
remove the ptirq_msi_info input.
Tracked-On: #4550
Signed-off-by: Li Fei1 <fei1.li@intel.com>
We look up PTIRQ entru only by SID. So _by_sid could removed.
And refine function name to verb-obj style.
Tracked-On: #4550
Signed-off-by: Li Fei1 <fei1.li@intel.com>
Given the vcpumask, check if the IRQ is single destination
and return the destination vCPU if so, the address of associated PI
descriptor for this vCPU can then be passed to dmar_assign_irte() to
set up the posted interrupt IRTE for this device.
For fixed mode interrupt delivery, all vCPUs listed in vcpumask should
service the interrupt requested. But VT-d PI cannot support multicast/broadcast
IRQs, it only supports single CPU destination. So the number of vCPUs
shall be 1 in order to handle IRQ in posted mode for this device.
Add pid_paddr to struct intr_source. If platform_caps.pi is true and
the IRQ is single-destination, pass the physical address of the destination
vCPU's PID to ptirq_build_physical_msi and dmar_assign_irte
Tracked-On: #4506
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@Intel.com>
Exend union dmar_ir_entry to support VT-d posted interrupts.
Rename some fields of union dmar_ir_entry:
entry --> value
sw_bits --> avail
Tracked-On: #4506
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@Intel.com>
Pass intr_src and dmar_ir_entry irte as pointers to dmar_assign_irte(),
which fixes the "Attempt to change parameter passed by value" MISRA C violation.
A few coding style fixes
Tracked-On: #4506
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@Intel.com>
As ACRN prepares to support platforms with multiple IO-APICs,
GSI is a better way to represent physical and virtual INTx interrupt
source.
1) This patch replaces usage of "pin" with "gsi" whereever applicable
across the modules.
2) PIC pin to gsi is trickier and needs to consider the usage of
"Interrupt Source Override" structure in ACPI for the corresponding VM.
Tracked-On: #4151
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Acked-by: Eddie Dong <eddie.dong@Intel.com>
Reverts 538ba08c: hv:Add vpin to ptdev entry mapping for vpic/vioapic
ACRN uses an array of size per VM to store ptirq entries against the vIOAPIC pin
and an array of size per VM to store ptirq entries against the vPIC pin.
This is done to speed up "ptirq entry" lookup at runtime for Level triggered
interrupts in API ptirq_intx_ack used on EOI.
This patch switches the lookup API for INTx interrupts to the API,
ptirq_lookup_entry_by_sid
This could add delay to processing EOI for Level triggered interrupts.
Trade-off here is space saved for array/s of size CONFIG_MAX_IOAPIC_LINES with 8 bytes
per data. On a server platform, ACRN needs to emulate multiple vIOAPICs for
SOS VM, same as the number of physical IO-APICs. Thereby ACRN would need around
10 such arrays per VM.
Removes the need of "pic_pin" except for the APIs facing the hypercalls
hcall_set_ptdev_intr_info, hcall_reset_ptdev_intr_info
Tracked-On: #4151
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Acked-by: Eddie Dong <eddie.dong@Intel.com>
1. Renames DEFINE_IOAPIC_SID with DEFINE_INTX_SID as the virtual source can
be IOAPIC or PIC
2. Rename the src member of source_id.intx_id to ctlr to indicate interrupt
controller
2. Changes the type of src member of source_id.intx_id from uint32_t to
enum with INTX_CTLR_IOAPIC and INTX_CTLR_PIC
Tracked-On: #4447
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Now we split passthrough PCI device from DM to HV, we could remove all the passthrough
PCI device unused code.
Tracked-On: #4371
Signed-off-by: Li Fei1 <fei1.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
In this case, we could handle all the passthrough PCI devices in ACRN hypervisor.
But we still need DM to initialize BAR resources and Intx for passthrough PCI
device for post-launched VM since these informations should been filled into
ACPI tables. So
1. we add a HC vm_assign_pcidev to pass the extra informations to replace the old
vm_assign_ptdev.
2. we saso remove HC vm_set_ptdev_msix_info since it could been setted by the post-launched
VM now same as SOS.
3. remove vm_map_ptdev_mmio call for PTDev in DM since ACRN hypervisor will handle these
BAR access.
4. the most important thing is to trap PCI configure space access for PTDev in HV for
post-launched VM and bypass the virtual PCI device configure space access to DM.
This patch doesn't do the clean work. Will do it in the next patch.
Tracked-On: #4371
Signed-off-by: Li Fei1 <fei1.li@intel.com>
rename the macro since MAX_PCPU_NUM could be parsed from board file and
it is not a configurable item anymore.
Tracked-On: #4230
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
ptirq_prepare_msix_remap was called no matter whether MSI/MSI-X was enabled or not
and it passed zero to input parameter virtual MSI/MSI-X data field to indicate
MSI/MSI-X was disabled. However, it barely did nothing on this case.
Now ptirq_prepare_msix_remap is called only when MSI/MSI-X is enabled. It doesn't
need to check whether MSI/MSI-X is enabled or not by checking virtual MSI/MSI-X
data field.
Tracked-On: #3475
Signed-off-by: Li Fei1 <fei1.li@intel.com>
ptirq_msix_remap doesn't do the real remap, that's the vmsi_remap and vmsix_remap_entry
does. ptirq_msix_remap only did the preparation.
Tracked-On: #3475
Signed-off-by: Li Fei1 <fei1.li@intel.com>
Now the structures(union source & struct intr_source) are defined
in ptdev.h,they are used in vtd.c and assign.c,
vtd is the hardware layer and ptdev is the upper-layer module
from the modularization perspective, this patch move down
these structures to avoid reversed dependency.
Tracked-On: #1842
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Using per_cpu list to record ptdev interrupts is more reasonable than
recording them per-vm. It makes dispatching such interrupts more easier
as we now do it in softirq which happens following interrupt context of
each pcpu.
Tracked-On: #3663
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
fix violations touched below:
1.Cast operation on a constant value
2.signed/unsigned implicity conversion
3.return value unused.
V1->V2:
1.bitmap api will return boolean type, not need to check "!= 0", deleted.
2.The behaves ~(uint32_t)X and (uint32_t)~X are not defined in ACRN hypervisor Coding Guidelines,
removed the change of it.
Tracked-On: #861
Signed-off-by: Huihuang Shi <huihuang.shi@intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
'pcpu_id' should be less than CONFIG_MAX_PCPU_NUM,
else 'per_cpu_data' will overflow. This commit fixes
this potential overflow issue.
Tracked-On: #3397
Signed-off-by: Tianhua Sun <tianhuax.s.sun@intel.com>
Reviewed-by: Yonghua Huang <yonghua.huang@intel.com>
1. reset polarity of ptirq_remapping_info to zero.
this help to set correct initial pin state, and fix the interrupt lost issue
when assign a ptirq to uos.
2. since vioapic_generate_intr relys on rte, we should build rte before
generating an interrput, this fix the redundant interrupt.
Tracked-On: #3362
Signed-off-by: Cai Yulong <yulongc@hwtc.com.cn>
Fix the violations not touched the logical.
1.Function return value not checked.
2.Logical conjuctions need brackets.
3.No brackets to then/else.
4.Type conversion without cast.
Tracked-On: #861
Signed-off-by: Huihuang Shi <huihuang.shi@intel.com>
This patch introduces check_vm_vlapic_state API instead of is_lapic_pt_enabled
to check if all the vCPUs of a VM are using x2APIC mode and LAPIC
pass-through is enabled on all of them.
When the VM is in VM_VLAPIC_TRANSITION or VM_VLAPIC_DISABLED state,
following conditions apply.
1) For pass-thru MSI interrupts, interrupt source is not programmed.
2) For DM emulated device MSI interrupts, interrupt is not delivered.
3) For IPIs, it will work only if the sender and destination are both in x2APIC mode.
Tracked-On: #3253
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
V1:Initial Patch
Modularize vpic. The current patch reduces the usage
of acrn_vm inside the vpic.c file.
Due to the global natire of register_pio_handler, where
acrn_vm is being passed, some usage remains.
These needs to be a separate "interface" file.
That will come in smaller newer patch provided
this patch is accepted.
V2:
Incorporated comments from Jason.
V3:
Fixed some MISRA-C Violations.
Tracked-On: #1842
Signed-off-by: Arindam Roy <arindam.roy@intel.com>
Reviewed-by: Xu, Anthony <anthony.xu@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
This patch fix potential null pointer dereference
1, will access null pointer if 'context' is null.
2, if entry already been added to the VM when add
intx entry for this vm, but parameter virt_pin
is not equal to entry->virt_sid.intx_id.pin. So
will saves this entry address to
vpin_to_pt_entry[entry->virt_sid.intx_id.pin] and
vpin_to_pt_entry[virt_pin]. In this case, this entry
will be freed twice.
Tracked-On: #3217
Signed-off-by: Tianhua Sun <tianhuax.s.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
ACRN supports LAPIC emulation for guests using x86 APICv. When guest OS/BIOS
switches from xAPIC to x2APIC mode of operation, ACRN also supports switching
froom LAPIC emulation to LAPIC passthrough to guest. User/developer needs to
configure GUEST_FLAG_LAPIC_PASSTHROUGH for guest_flags in the corresponding
VM's config for ACRN to enable LAPIC passthrough.
This patch does the following
1)Fixes a bug in the abovementioned feature. For a guest that is
configured with GUEST_FLAG_LAPIC_PASSTHROUGH, during the time period guest is
using xAPIC mode of LAPIC, virtual interrupts are not delivered. This can be
manifested as guest hang when it does not receive virtual timer interrupts.
2)ACRN exposes physical topology via CPUID leaf 0xb to LAPIC PT VMs. This patch
removes that condition and exposes virtual topology via CPUID leaf 0xb.
Tracked-On: #3136
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
