This patch emulates the VMPTRLD instruction. L0 hypervisor (ACRN) caches
the VMCS12 that is passed down from the VMPTRLD instruction, and merges it
with VMCS01 to create VMCS02 to run the nested VM.
- Currently ACRN can't cache multiple VMCS12 on one vCPU, so it needs to
flushes active but not current VMCS12s to L1 guest.
- ACRN creates VMCS02 to run nested VM based on VMCS12:
1) copy VMCS12 from guest memory to the per vCPU cache VMCS12
2) initialize VMCS02 revision ID and host-state area
3) load shadow fields from cache VMCS12 to VMCS02
4) enable VMCS shadowing before L1 Vm entry
Tracked-On: #5923
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Signed-off-by: Zide Chen <zide.chen@intel.com>
This patch implements the VMXOFF instruction. By issuing VMXOFF,
L1 guest Leaves VMX Operation.
- cleanup VCPU nested virtualization context states in VMXOFF handler.
- implement check_vmx_permission() to check permission for VMX operation
for VMXOFF and other VMX instructions.
Tracked-On: #5923
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Signed-off-by: Zide Chen <zide.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@Intel.com>
According to VMXON Instruction Reference, do the following checks in the
virtual hardware environment: vCPU CPL, guest CR0, CR4, revision ID
in VMXON region, etc.
Currently ACRN doesn't support 32-bit L1 hypervisor, and injects an #UD
exception if L1 hypervisor is not running in 64-bit mode.
Tracked-On: #5923
Signed-off-by: Zide Chen <zide.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@Intel.com>
This patch emulates VMXON instruction. Basically checks some
prerequisites to enable VMX operation on L1 guest (next patch), and
prepares some virtual hardware environment in L0.
Tracked-On: #5923
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Signed-off-by: Zide Chen <zide.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@Intel.com>
Create virtual root port through add_vdev hypercall. add_vdev
identifies the virtual device to add by its vendor id and device id, then
call the corresponding function to create virtual device.
-create_vrp(): Find the right virtual root port to create
by its secondary bus number, then initialize the virtual root port.
And finally initialize PTM related configurations.
-destroy_vrp(): nothing to destroy
Tracked-On: #5915
Signed-off-by: Rong Liu <rong.l.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Acked-by: Jason Chen <jason.cj.chen@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Add virtual root port that supports the most basic pci-e bridge and root port operations.
- init_vroot_port(): init vroot_port's basic registers.
- deinit_vroot_port(): reset vroot_port
- read_vroot_port_cfg(): read from vroot_port's virtual config space.
- write_vroot_port_cfg(): write to vroot_port's virtual config space.
Tracked-On: #5915
Signed-off-by: Rong Liu <rong.l.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Acked-by: Jason Chen <jason.cj.chen@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
x86/timer.[ch] was moved to the common directory largely unchanged.
x86 specific code now resides in x86/tsc_deadline_timer.c and its
interface was defined in hw/hw_timer.h. The interface defines two
functions: init_hw_timer() and set_hw_timeout() that provides HW
specific initialization and timer interrupt source.
Other than these two functions, the timer module is largely arch
agnostic.
Tracked-On: #5920
Signed-off-by: Rong Liu <rong2.liu@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Modules that use udelay() should include "delay.h" explicitly.
Tracked-On: #5920
Signed-off-by: Rong Liu <rong2.liu@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Generalize and split basic cpu cycle/tick routines from x86/timer:
- Instead of rdstc(), use cpu_ticks() in generic code.
- Instead of get_tsc_khz(), use cpu_tickrate() in generic code.
- Include "common/ticks.h" instead of "x86/timer.h" in generic code.
- CYCLES_PER_MS is renamed to TICKS_PER_MS.
The x86 specific API rdstc() and get_tsc_khz(), as well as TSC_PER_MS
are still available in arch/x86/tsc.h but only for x86 specific usage.
Tracked-On: #5920
Signed-off-by: Rong Liu <rong2.liu@intel.com>
Signed-off-by: Yi Liang <yi.liang@intel.com>
RTCT has been updated to version 2,
this patch updates hypervisor RTCT parser to support
both version 1 and version 2 of RTCT.
Tracked-On: #6020
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Reviewed-by: Jason CJ Chen <jason.cj.chen@intel.com>
Define LIST_OF_VMX_MSRS which includes a list of MSRs that are visible to
L1 guests if nested virtualization is enabled.
- If CONFIG_NVMX_ENABLED is set, these MSRs are included in
emulated_guest_msrs[].
- otherwise, they are included in unsupported_msrs[].
In this way we can take advantage of the existing infrastructure to
emulate these MSRs.
Tracked-On: #5923
Spick igned-off-by: Zide Chen <zide.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
For simplification purpose, use 'ssram' instead of
'software sram' for local names inside rtcm module.
Tracked-On: #6015
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Move Cache/TLB arch specific parts into cpu.h
After this change, we should not expose arch specific parts out from mmu.h
Tracked-On: #5830
Signed-off-by: Li Fei1 <fei1.li@intel.com>
Allow guest set CR4_VMXE if CONFIG_NVMX_ENABLED is set:
- move CR4_VMXE from CR4_EMULATED_RESERVE_BITS to CR4_TRAP_AND_EMULATE_BITS
so that CR4_VMXE is removed from cr4_reserved_bits_mask.
- force CR4_VMXE to be removed from cr4_rsv_bits_guest_value so that CR4_VMXE
is able to be set.
Expose VMX feature (CPUID01.01H:ECX[5]) to L1 guests whose GUEST_FLAG_NVMX_ENABLED
is set.
Assuming guest hypervisor (L1) is KVM, and KVM uses EPT for L2 guests.
Constraints on ACRN VM.
- LAPIC passthrough should be enabled.
- use SCHED_NOOP scheduler.
Tracked-On: #5923
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Signed-off-by: Zide Chen <zide.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
moving invvpid and invept helper code from mmu.c to mmu.h, so that they
can be accessed by the nested virtualization code.
No logical changes.
Tracked-On: #5923
Signed-off-by: Zide Chen <zide.chen@intel.com>
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
TPAUSE, UMONITOR or UMWAIT instructions execution in guest VM cause
a #UD if "enable user wait and pause" (bit 26) of VMX_PROCBASED_CTLS2
is not set. To fix this issue, set the bit 26 of VMX_PROCBASED_CTLS2.
Besides, these WAITPKG instructions uses MSR_IA32_UMWAIT_CONTROL. So
load corresponding vMSR value during context switch in of a vCPU.
Please note, the TPAUSE or UMWAIT instruction causes a VM exit if the
"RDTSC exiting" and "enable user wait and pause" are both 1. In ACRN
hypervisor, "RDTSC exiting" is always 0. So TPAUSE or UMWAIT doesn't
cause a VM exit.
Performance impact:
MSR_IA32_UMWAIT_CONTROL read costs ~19 cycles;
MSR_IA32_UMWAIT_CONTROL write costs ~63 cycles.
Tracked-On: #6006
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
Instead of "#include <x86/foo.h>", use "#include <asm/foo.h>".
In other words, we are adopting the same practice in Linux kernel.
Tracked-On: #5920
Signed-off-by: Liang Yi <yi.liang@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
