Now we only configure "hide MTRR" explicitly to false for SOS. For other VMs,
we don't configure it which means hide_mtrr is false by default.
And remove global config MTRR_ENABLED
Tracked-On: #1842
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
The init page tables installed in either cpu_primary.S or trampoline.S
are 1:1 mapping and won't be changed in the future.
The 'actual' hypervisor page table installed in enable_paging() is 1:1
mapping currently but it could be changed in the future. Both hva2hpa() and
hpa2hva() are implemented based on these page tables and can't be used
when the init page tables take effect.
This patch does the following cleanup:
- remove all hva2hpa()/hpa2hva() before calling enable_paging()
- get_hv_image_base() returns HVA, not HPA. So add hva2hpa() for all cases
that are called afte enable_paging().
Tracked-On: #2700
Signed-off-by: Zide Chen <zide.chen@intel.com>
Acked-by: Eddie Dong <Eddie.dong@intel.com>
This patch mainly unifies init_vm_boot_info's implementation between SBL and
UEFI.
Tracked-On: #2708
Signed-off-by: Tw <wei.tan@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
In partition mode, unassign_iommu_device() is called from vpci_cleanup(),
so when shutdown_vm() is called, unassign_iommu_device() could fail because
of "domain id mismatch" and DMAR is not cleared.
Also move destroy_ept() after the call to destroy_iommu_domain().
Tracked-On: #2700
Signed-off-by: Zide Chen <zide.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Currently for pre-launched VMs, HV intends to do EPT mapping for all GPA
space, which implies that it wastes HPA to back PCI hole and other vE820
entries that are not backed by physical memory.
This patch solves this issue and fixes ve820 entries whose length is not
aligned to 4K, and changes the lowmem entry's start GPA from 1MB to 2MB.
Tracked-On: #2587
Signed-off-by: Zide Chen <zide.chen@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
- Do not refer vm_configs[] directly in vm module;
Tracked-On: #2291
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
- move sanitize_vm_config() from vm.c to vm_config.c;
- move get_vm_config() from vm.h to vm_config.h;
Tracked-On: #2291
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
When CAT is supported, UOS can setup acrn_vm_config.clos, to use CAT
feature. Eg.,
struct acrn_vm_config vm_configs[CONFIG_MAX_VM_NUM] = {
{
.guest_flags |= CLOS_REQUIRED,
.clos = 1,
},
};
sanitize_vm_config() will check if CAT is supported and
vm_configs.clos is valid.
Tracked-On: #2462
Signed-off-by: Tao Yuhong <yuhong.tao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
--move several uart API declarations from console.h to uart16550.h
--move several shell API declarations from console.h to shell.h
--add dbg_cmd.h, move 'handle_dbg_cmd' declaration from console.h
to dbg_cmd.h
--move debug/uart16550.h to include/debug/uart16550.h since some
uart APIs will be called by external files
Tracked-On: #1842
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
modified: arch/x86/guest/vm.c
modified: arch/x86/init.c
modified: bsp/uefi/cmdline.c
modified: debug/console.c
modified: debug/dbg_cmd.c
modified: debug/uart16550.c
modified: debug/vuart.c
modified: hw/pci.c
modified: include/arch/x86/multiboot.h
modified: include/debug/console.h
new file: include/debug/dbg_cmd.h
new file: include/debug/shell.h
renamed: debug/uart16550.h -> include/debug/uart16550.h
There are still some misra-c violations when CONFIG_PARTITION_MODE is defined.
arch/x86/configs:
- remove the unused macro: PRE_LAUNCH_VM_NUM
- pt_dev.c: VMx_CONFIG_PCI_PTDEV_NUM has been defined in partition_config.h,
should not hard code them again in pt_dev.c.
- ve820.c: use "UL" suffix instead of "U" for 64 bits variables.
vmid is uint16_t in ACRN, so vuart_vmid should be uint16_t as well.
Fix another few other miscellaneous misra-c violations.
Tracked-On: #861
Signed-off-by: Zide Chen <zide.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
merge E820_MAX_ENTRIES and NUM_E820_ENTRIES
to E820_MAX_ENTRIES.
Tracked-On: #1842
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
Removed the remaining reference of acrn vm from
inside of vtd.c.
Removed usage of snoopy_mem, and added code to achieve
the same using iommu_snoop.
Initialize iommu_snoop to true in create deault iommu.
Tracked-On: #2496
Signed-off-by: Arindam Roy <arindam.roy@intel.com>
This patch is a modified one. It removes the usage
of acrn_vm struct from inside vtd.c.
It also puts struct iommu_domain inside vtd.h,
from vtd.c.
It modifies the signature of init_iommu_domain
in order to remove dependency on acrn_vm from
inside vtd.c.
Incorporated comments from Jason and Eddie.
Changed the name of sos_vm_domain to
fallback_iommu_domain
Removed any reference of sos_vm from vtd.[c|h]
files, including comments.
Tracked-On: #2496
Signed-off-by: Arindam Roy <arindam.roy@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
-- now hypervisor.h is the universal set of header file,
this patch doesn't include hypervisor.h, only include
some necessary header files for vm.c and vm.h
-- move 'struct vcpuid_entry' from vm.h to vcpuid.h
-- remove dead code 'enum vm_privilege_level'
-- move 'enum vpic_wire_mode' from vm.h to vpic.h
Tracked-On: #1842
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Remove redundancy code since they are not used now.
-- remove 'max_ram_blk_base' & 'max_ram_blk_size' in
struct e820_mem_params
-- remove 'gpa_lowtop' in struct vm_hw_info
-- remove MACRO 'UOS_DEFAULT_START_ADDR'
Tracked-On: #1842
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
- add e820 info in struct acrn_vm;
- rename rebuild_sos_vm_e820() to create_sos_vm_e820();
- add create_prelaunched_vm_e820() for partition mode;
- rename create_e820_table() to create_zeropage_e820() and merge for
both sharing mode and partition mode;
- move create_xxx_vm_e820() to vm.c;
- move create_zeropage_e820() to vm_load.c;
Tracked-On: #2291
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
- move `vcpumask2pcpumask` from `guest.c` to `vcpu.c`
- move `prepare_sos_vm_memmap` from `guest.c` to `vm.c`
- rename `guest.c` to `guest_memory.c`
Tracked-On: #2484
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
1. in UEFI bsp code, not need UEFI macro; it is controlled in makefile.
2. in vm/acpi/interrupt code, unify the API name for SBL & UEFI.
3. remove unnecessary header including and unused code.
Tracked-On: #1842
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
-- move vm_pic() from vm.h to vpic.c since it is
only used in vpic.c
-- move vm_ioapic() from vm.h to vioapic.c
change vioapic_reset(struct acrn_vioapic *vioapic) -->
vioapic_reset(struct acrn_vm *vm)
then vm_vioapic() is only used in vioapic.c
-- move vm_vuart() from vm.h to vuart.c,
now this api is used in vuart.c and shell.c
Tracked-On: #1842
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
Add a API to sanitize vm_configs[] array, in this API, we will do sanity
check for VM configurations and refill some fields in vm_configs[]. If
sanity check is failed, the HV would reject to boot.
About pcpu_bitmap of SOS_VM:
We should not hard code pcpu_bitmap for SOS_VM, this is not convenient for
unconfigured boards. The pcpu_bitmap follows a very simple rule:
All physical CPUs except ocuppied by Pre-launched VMs are all belong to
SOS_VM. In this way, the pcpu_bitmap of a SOS_VM is decided by pcpu_bitmap
status in PRE_LAUNCHED_VMs.
To get the correct pcpu_bitmap of SOS_VM, We need to setup another rule, that
the vm_configs[] array should follow the order of PRE_LAUNCHED_VM - SOS_VM
strictly.
With this patch enabled, the pcpu_bitmap field of sos vm config is not needed
to configure;
Tracked-On: #2291
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Previously I/O emulation completion mode mode was configured in Kconfig:
config IOREQ_NOTIFICATION
bool "Notification mode"
help
When I/O request is completed, SOS will mark the completion status and
notify hypervisor via hypercall. Hypervisor will finish the post work
when notification is received.
config IOREQ_POLLING
bool "Polling mode"
help
When I/O request is completed, SOS will only mark completion status
without notifying hypervisor. Hypervisor will poll the completion
status and finish the post work.
Now move this configuration to guest_flags of acrn_vm_config struct.
if ((vm_config->guest_flags & IO_COMPLETION_POLLING) != 0U) {
I/O with polling;
} else {
I/O with notification;
}
Tracked-On: #2291
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The member of mem_size and start_hpa in acrn_vm_config struct will
be replaced with the acrn_vm_mem_config struct;
Tracked-On: #2291
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
For each vm_array[] item, its config is located in corresponding
index of vm_configs[], so vm_config pointer is not needed any more.
Tracked-On: #2291
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
All the legacy cpu configration in vm_description.c are all cleaned up;
Tracked-On: #2291
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
We will use guest_flags of SECURE_WORLD_ENABLED to check wthether
sworld is supported.
Tracked-On: #2291
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This patch creates a new get_sos_vm() api to replace get_vm_from_vmid(0U)
because VM 0 might not be SOS VM now;
Tracked-On: #2291
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The patch will show correct VM name per its configuration. As we do not
validate vm id when call get_vm_from_vmid() any more, we only show VM's
states which their VM type are defined;
If VM name is not configured in config file, then the name is specified
with vm id, i.e. "ACRN VM_(vm id)"
Tracked-On: #2291
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
When pcpu enter guest mode, it will call launch_vms() function to launch
VMs in global vm_configs array.
In launch_vms() function, current pcpu will go through vm_config array list
and check whether it is a bsp of configured VM, if yes then it will prepare
corresponding VM and start it. The index of vm_config array will be specified
to VM id.
The first least significant bit in pcpu_bitmap means the bsp of the VM.
Tracked-On: #2291
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Under sharing mode, VM0 is identical with SOS VM. But the coupling of
SOS VM and VM 0 is not friendly for partition mode.
This patch is a pure term change of vm0 to sos VM, it does not change
any code logic or senmantic.
Tracked-On: #2291
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
move this api from io_emul.c to vm.c to avoid reverse
dependency
Tracked-On: #1842
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
This patch is a pure term change of vm_description to vm_config,
the struct name of vm_description is changed to acrn_vm_config.
The patch does not change any code logic or senmantic.
Tracked-On: #2291
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
1. add static for local functions and variables.
2. move vm_sw_loader from vcpu to vm
3. refine uefi.c to follow the code rules.
4. separate uefi.c for vm0 boot and bsp two parts. bsp layer just
access native HW related, can't access vm/vcpu, vm0 boot part can
access vm / vcpu data structure.
Tracked-On: #1842
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
vuart it used for SOS to output log to HV console,
so if dbg uart is disabled, it need be disabled too:
just unregister its PIO.
Tracked-On: 2170
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
-- fix "more than one exit point" and "goto detected" violations
-- change prepare_vm0_memmap to void type
-- Add free_vm_id when create vm failed
Tracked-On: #861
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
-- fix MISRA-C violation "procedure has more than one exit point"
for this api
-- change start_vm to void type since it is always return 0
Tracked-On: #861
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Fix violation "procedure has more than one exit point"
for this api.
Tracked-On: #861
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
For security, this patch add one flag per vm and disable snoop control
for sos and enable snoop control for uos by default.
v2: add one flag in vm, not in iommu domain.
v3: add vm null check
Tracked-On: #2086
Signed-off-by: Zhipeng Gong <zhipeng.gong@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
1. change its APIs as more indepentent, and modify the callers' code
2. limit its global variables as static, and return const to the callers
3. remove unused code in "CONFIG_CMA"
Tracked-On: #1842
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
1. e820 is modulized as separated files.
2. move boot_regs into multiboot.h as it's related with
multiboot info header
Tracked-On: #1842
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
The function not used in extern c file, must add static.
Tracked-On: #861
Signed-off-by: Huihuang Shi <huihuang.shi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
replace CPU_PAGE_SIZE with PAGE_SIZE
These two MACROs are duplicated and PAGE_SIZE is a more reasonable name.
Tracked-On: #861
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The previous would reserve memory for trusty in SOS kernel. Howerer,
there would no available 16 MB continue memory any more after a long time.
This result in allocating memory for trusty failed. This patch will reserve
memory for trusty in ACRN hypervisor in which case the memory allocation
for trusty will never fail.
Tracked-On: #1942
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
IEC 61508,ISO 26262 standards highly recommend single-exit rule.
Reduce the count of the "return entries".
Fix the violations which is comply with the cases list below:
1.Function has 2 return entries.
2.The first return entry is used to return the error code of
checking variable whether is valid.
Fix the violations in "if else" format.
Tracked-On: #861
Signed-off-by: Huihuang Shi <huihuang.shi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This patch introduce a new mode of IO request completion, polling mode.
Now, the sketch of ioreq process can be,
A. UOS vcpu0 generate PIO/MMIO ->
B. pcpu1(vcpu0 of UOS) trap into HV ->
C. pcpu1 build ioreq, send IPI and enter idle ->
D.1 pcpu0(vcpu0 of SOS) response IPI,
D.2 pcpu0 handle the ioreq in HV, kernel, DM,
D.3 pcpu0 mark ioreq as complete,
D.4 pcpu0 hypercall to enter HV ->
E.1 pcpu0 send IPI to wake pcpu1 up
E.2 UOS vcpu0 continue running
With this change, it skips D.4, E.1 steps. In step C, pcpu1 will enter a
polling ioreq state idle after send out the IPI.
It can save about ~5000 cpu cycles.
In polling mode, we do the polling in idle instead of pause cpu all the
time. It will consume more power. A better way is to use monitor/mwait
instructions which can put cpu into a sleep state with monitoring a
memory address. Unfortunately, APL has bug with monitor. We can gather
all ioreqs state into one monitorable memory and take advantage of
monitor/mwait for future platform.
The way polling or notification is per VM. We can config VMs in
different mode. By default, IO request completion will use notification
mode for all VMs. We can switch it by Kconfig.
Tracked-On: #1821
Signed-off-by: Shuo Liu <shuo.a.liu@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
In current code, DMA remapping is enabled at very early stage, when there is no
device added.
Devices are added to VT-d context table when creating VMs.
There is potential risk that there may be device DMA transactions when DMA remapping is
enabled, but the device is not added to the VT-d context table. (Eg. this could happen in UEFI
enviroment when USB keyboard use in efi intenal shell.)
This patch defers DMA remapping enabling until vm creation.
Tracked-On: #1855
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
ioreqs acrossing VM reset is meaningless. So we reset their status when
VM reset.
Please note, device model and service os need to handle various ioreqs
pending status in emergency reset condition carefully. Otherwises, the
post processing of such ioreqs might overwrite this reset.
Tracked-On: projectacrn#1821
Signed-off-by: Shuo Liu <shuo.a.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Even in partition mode, we also need to clear vmid in vmid_bitmap to
indicate the VM is not present.
Tracked-On: projectacrn#1821
Signed-off-by: Shuo Liu <shuo.a.liu@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
fix the following integer violations:
1. Signed/unsigned conversion without cast
2. Literal value requires a U suffix
3. Implicit conversion of underlying type
v3 -> v4:
* change the type of npk_loglevel/mem_loglevel/console_loglevel
from uint32_t to uint16_t
v2 -> v3:
* discard the return value of update_ept
* discard changes related to npk loglevel
v1 -> v2:
* remove the unnecessary changes related to the false positive
issues caused by scanning tool
* change the type of the local variable 'vlapic_id' from uint8_t
to uint32_t in function 'vlapic_build_id'
* change the type of the struct member 'flags' in shared_buf from
uint64_t to uint32_t
Tracked-On: #861
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
-- Config MAX_EMULATED_MMIO_REGIONS 16 in Kconfig
-- Add emulated mmio array and emulated mmio regions
in vm structure
-- Remove mmio list in vm structure
-- Remove unregister_mmio_emulation_handler and
vioapic_cleanup APIs
Tracked-On: #861
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
-- Add emulated port io index
-- Add emulated pio array in vm structure
-- Remove port list in vm structure
-- Remove free_io_emulation_resource/register_io_handler/
create_io_handler APIs
v2-->v3:
-- not add 'is_emulated', check len == 0U
-- Check if io_read/io_write handler is NULL before calling
-- Replace ENUM with MACRO for emulated pio index to avoid
MISRA-C violations
v1-->v2:
-- Remove EMUL_PIO_NUM in Kconfig, add emulated pio index
for PIC/PCI/UART/RTC/PM
Tracked-On: #861
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
MISRA-C requires that the controlling expression of an if statement or
an iteration-statement shall be Boolean type.
v1 -> v2:
* update the U suffix of constant to let the type of operands
to bit operations (&) is the same.
* update the type of 'i' from uint64_t to uint16_t in
'profiling_set_control' since it is limited by phys_cpu_num,
which is uint16_t.
Tracked-On: #861
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
It is not necessary to use atomic operation to
set the initial value for 'created_vcpu' in vm structure.
Tracked-On: #861
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
For data structure types "struct vm", its name is identical
with variable name in the same scope. This is a MISRA C violation.
Naming convention rule:If the data structure type is used by multi
modules, its corresponding logic resource is exposed to external
components (such as SOS, UOS), and its name meaning is simplistic
(such as vcpu, vm), its name needs prefix "acrn_".
The following udpates are made:
struct vm *vm-->struct acrn_vm *vm
Tracked-On: #861
Signed-off-by: Xiangyang Wu <xiangyang.wu@linux.intel.com>
For data structure types "struct vcpu", its name is identical
with variable name in the same scope. This is a MISRA C violation.
Naming convention rule:If the data structure type is used by multi
modules, its corresponding logic resource is exposed to external
components (such as SOS, UOS), and its name meaning is simplistic
(such as vcpu, vm), its name needs prefix "acrn_".
The following udpates are made:
struct vcpu *vcpu-->struct acrn_vcpu *vcpu
Tracked-On: #861
Signed-off-by: Xiangyang Wu <xiangyang.wu@linux.intel.com>
Replace dynamic memory allocation in memory management with static memory allocation.
Since the static memory allocation can guarantee the allocation never failed, so
split_large_page and construct_pgentry don't need to return a errno any more.
Besides, the destroy_ept don't need to free page any more. Instead, it would memset
the eptp to 0 to make sure we can't walk this paging table again.
Tracked-On: #861
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Currently we compare vcpu_id with phys_cpu_num,
vcpu_id is not related with phys_cpu_num,
this patch cleanup them.
Tracked-On: #861
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Li, Fei1 <fei1.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
guest software loading is per VM instead of vcpu. So we move it
from prepare_vcpu to prepare_vm. And make sure it's called for
all VMs for partition mode.
Tracked-On: #1565
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
There's no need to walk these paging tables to transfer HPA to GPA
for a VM, so remove it.
Tracked-On: #1124
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Pointer param should be declared pointer to const if
the parameter is keeped read-only.
This patch changes pointer param whose name is vm.
Tracked-On:#861
Signed-off-by: Huihuang Shi <huihuang.shi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Move vcpu mode set to function vcpu_set_regs.
Tracked-On: #1231
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
For UOS, there is no BSP init state saved in hv. We always need
DM to set BSP init state by using hypercall. So we can't auto
start vm during vm reset.
Tracked-On: #1231
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Now, we make UOS to set BSP init state by using hypercall. We
could drop the old UOS loader in HV and make vm loader in HV
only for SOS.
Tracked-On: #1231
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
NOTE: this patch is only workaround patch for UOS BSP state init.
Eventually, the DM will call hypercall to init UOS BSP state.
We use this workaround patch here to simplify the init_guest_state.
Will make the caller of init_guest_state calls init_guest_vmx
directly.
Tracked-On: #1231
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
With reset_vcpu_regs as pre-condition, we only need to set
cs_selector and cs_base for AP.
We call set_ap_entry in two places:
1. When emulation AP SIPI
2. When sos BSP resume from S3. The BSP is resumed to real
mode with entry set to wakeup_vec. We call set_ap_entry
API here with entry twisted from wakeup_vec.
Tracked-On: #1231
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
If defined CONFIG_VM0_DESC, HV will use predefined vm0_desc
to config VM0,now it is unneccessary, then remove these code.
Tracked-On: #861
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Li, Fei1 <fei1.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
- add missing brackets for 'if/else' statements based on MISRA-C
requirements
v1 -> v2:
* add brackets for each conditions in 'if' statements to improve
the readability
* modify 'ptdev_init' to make the logic clearer
Tracked-On: #861
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Loop the global vm_array[] instead of the vm_list.
Tracked-On: #861
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
-- Replace dynamic memory allocation with static memory
-- Remove the parameter check if the vm is NULL
Tracked-On: #861
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This patch is to enhance the feature of "interrupt storm
mitigation"; when interrupt storm happens on one UOS
it should keep as smaller effect to SOS as possible.
Add variables in PTdev entry & VM, used to record one
UOS's pass-thru devices' interrupt data; add a function
to collect the data.
Also add a timer used to delay UOS pass-thru devices'
interrupt injection if an "interrupt storm" detected
by SOS.
Tracked-On: #866
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Reviewed-by: Li Fei1 <fei1.li@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Replace pointer with static memory for msr_bitmap
inside structure vm_arch.
Tracked-On: #861
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Anthony Xu <anthony.xu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
for each pass-thru device and its entry owned by one VM, so
change the pass-thru device's softirq lock & entry list into
per VM, so one VM's PT device interrupt process will not
interfere with other VMs; especially in case one user OS
"interrupt storm" happens, it will have little effect on
service OS.
Tracked-On: #866
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
MISRA-C requires that the controlling expression of an if statement or
an iteration-statement shall be Boolean type.
Tracked-On: #861
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
-- rename struct vioapic --> struct acrn_vioapic
-- update 'vioapic' field in 'struct arch_vm' from pointer
to instance
-- change vm_ioapic(vm) to inline, and move it to vm.h
-- change vioapic_init to void type
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Anthony Xu <anthony.xu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
-- update 'vuart' field in 'struct vm' from pointer
to instance
-- replace MACRO with inline function for vm_vuart,
and move it to vm.h
-- change vuart_init to void type
-- rename struct vuart -->struct acrn_vuart
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Anthony Xu <anthony.xu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
-- update 'vpic' field in 'struct vm' from pointer
to instance, and move it from 'struct vm' to 'struct arch_vm'
-- replace MACRO with inline function for vm_pic, and move it
to vm.h
-- changed vpic_init to void type
-- removed vpic_cleanup
-- move struct acrn_vpic/i8259_reg_state from vpic.c to vpic.h
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Anthony Xu <anthony.xu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
In current code, the address translation type for passthrough devices
in SOS is passthrough type, which means the device in SOS can access
the whole physcial memory.
This patch uses SOS EPT to translate address for passthrough
devices. So that the memory of VMM or trusty can be protected from
SOS PTDev.
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Reviewed-by: Li, Fei1 <fei1.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This patch adds code to support read-only RTC support for guests
run by partition mode ACRN. It supports RW for CMOS address port 0x70
and RO for CMOS data port 0x71. Reads to CMOS RAM offsets are fetched
by reading CMOS h/w directly and writes to CMOS offsets are discarded.
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
- clear run context when reset vcpu;
- destroy trusty without erase trusty memory when reset vm;
changelog:
v1 -> v2: fix misra violation on calling memset();
Signed-off-by: Sun Victor <victor.sun@intel.com>
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Reviewed-by: Chi Mingqiang <mingqiang.chi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
ACRN in partition mode emulates UART for the VMs directly launced
from HV. This patch adds an option to enable/disable vUART for a
VM.
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
For Partition mode ACRN, kernel load address and Boot args load address
are hardcoded. Boot args are currently passed from vm description for
each VM. Renamed init_vm0_boot_info to init_vm_boot_info.
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
ACRN boots multiple OS in partitioning mode. This patch adds code to assign
vm_id in the vm data structure to be same as the one assigned at compile time.
This makes the vm id deterministic for each VM booted from HV directly.
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
This patch is an extension to the commit 6643adff8b.
It uses the mptable API to build mptable for each VM booted by ACRN in partition mode.
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Adding code to map memory for UOS in partitioning mode ACRN.
HPA starting above 4GB is used for UOS memory. Supports only contiguous memory
from host for UOS. Current implementation supports only 2 GB for UOS memory.
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
-- add clear trusty memory flag
In some cases such as UOS power off or UOS full reset,
need to clear trusty memory,no need to clear memory such as
UOS S3 or UOS system reset,then add a flag to distinguish it
when destroy secure world.
-- Restore trusty memory to guest normal world.
-- Moved free trusty EPT inside destroy_secure_world
In some cases such as UOS S3 or UOS system reset,
only need to free trusty EPT, this patch move free
trusty EPT inside destroy_secure_world.
Because PD/PT are shared in both secure world's EPT
and normal world's EPT,before freeing trusty EPT,
it will memset all PDPTEs except trusty memory,
then call 'free_ept_mem', it can only free trusty EPT,
and does't affect shared normal world EPT.
v2-->v3:
-- Used new mmu api ept_mr_add when restore trusty memory
to SOS and normal world
-- Dropped this patch "Removed reverted page tables for trusty memory"
because map_mem will be removed in future
It will have a patch, need to update this api(ept_mr_add),
it will not create inverted page tables for trusty memory.
v1-->v2:
-- free trusty ept
still use free_ept_mem, not add a new api,but need to
memset pdptes except trusty memory
-- Removed reverted page tables for trusty memory.
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
V4:
- Clear address cache info after a full cf8/cfc access
- Add NULL pointer checking when calling init/deinit ops
V3:
- Do not use ASSERT
- Loop through the vdev list defined in vm_desctiption table to call the vdev init/unit functions
- Make the cached vbdf info struct per vm instead of per pcpu
V2:
- Fixed MISRA violations
Reviewed-by: Anthony Xu <anthony.xu@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Define Bitmap flag to indicate secure world's state:
supported: 0(not supported), 1(supported)
active: 0(inactive), 1(active)
Refine secure_world_memory:
base_gpa_in_sos: base_gpa from SOS's view
base_gpa_in_uos: base_gpa from UOS's view, this is the original base_gpa
allocated by bootloader.
Recording above GPA is for usage of trusty EPT destroy and re-create.
There is an assumption: the secure world's memory address is contiguous
in both SOS and physical side.
Signed-off-by: Qi Yadong <yadong.qi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
ACRN in partitioning mode boots multiple OS. Adding code to parse
VM description structure and a reference description structure for
booting 2 OSes.
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Added prepare_vm function as a wrapper function on top of prepare_vm0.
This makes adding support for partition mode ACRN to boot multiple
VMs from HV cleaner.
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Remove structure vm_attr
Wrap two APIs alloc_vm_id and free_vm_id
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
And export the API to DM. DM will do system reboot/S3 resume based
on this API.
Also add the pre-assumption description for some vm APIs.
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
For data structure types "enum vpic_wire_mode, struct stack_canary",
its name is identical with variable name in the same scope.
This MISRA C violation is detected by static analysis tool.
For variables "segment_override, pde_index", its name is identical
with function name. This MISRA C violation is detected.
Naming convention rule:Variable name can be shortened from
its data structure type name.
The following udpates are made:
enum vpic_wire_mode vpic_wire_mode-->enum vpic_wire_mode wire_mode
struct stack_canary stack_canary-->struct stack_canary stk_canary
uint8_t segment_override:1 --> uint8_t seg_override:1
uint32_t pde_index--> uint32_t pde_idx
V1-->V2:
Remove update "enum cpu_state cpu_state-->enum cpu_state state"
and "enum irqstate irqstate-->enum irq_ops_mode ops_mode", other
patch will cover it.
V2-->V3:
Update "uint32_t pde_index--> uint32_t pde_idx".
Signed-off-by: Xiangyang Wu <xiangyang.wu@linux.intel.com>
