to enable APICv Posted interrupt supported, following the
specifications defined in Intel SDM Section #29.6, Volume3.
Posted-interrupt processing is a feature by which a processor
processes the virtual interrupts by recording them as pending
on the virtual-APIC page.
Injecting interrupts to VCPU from remote CPU without causing
VM exit on the destination, following steps in SDM Section 29.6,volume3:
Tracked-On: #1447
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The vcpu state is initialized outside of init_guest_state:
- SOS BSP state is initialized in SOS loader
- UOS BSP state is initialized in UOS loader
- AP state is initialized during SIPI signal emulation
We could make init_guest_state only update the vcpu state
to VMCS structure.
Tracked-On: #1231
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
NOTE: this patch is only workaround patch for UOS BSP state init.
Eventually, the DM will call hypercall to init UOS BSP state.
We use this workaround patch here to simplify the init_guest_state.
Will make the caller of init_guest_state calls init_guest_vmx
directly.
Tracked-On: #1231
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
We move the SOS BSP state init to vm loader and drop
function init_guest_context_vm0_bsp.
Update the definition of vm0_boot_context to fix code
violations.
Tracked-On: #1231
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
TR selector initianlization using pre-defined HOST_GDT_RING0_CPU_TSS_SEL
rather than loading from register. Instead calculating real base address
of TSS based on TR selector and gdt, getting it from per cpu data.
Tracked-On: #1394
Signed-off-by: Yang, Yu-chu <yu-chu.yang@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
- add missing brackets for 'if/else' statements based on MISRA-C
requirements
v1 -> v2:
* add brackets for each conditions in 'if' statements to improve
the readability
* modify 'ptdev_init' to make the logic clearer
Tracked-On: #861
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Sometimes we need to invalidate cached translation information for guest
when change some bits in CR0/CR4 which related to paging. Here're two cases:
1. If there change some bits to enable/disable paging (mode) or access rights.
For CR0: PG/WP/CD/NW; For CR4: PGE/PSE/PAE/SMEP/SMAP/PKE
2. When guest using PAE paging, we should reload the PDPTE registers sometimes,
detail in SDM Vol 3 Chap 4.4.1 and Chap 4.11.1
Tracked-On: #1379
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
add is_long_mode to check whether the processor is operating in IA-32e mode
add is_paging_enabled to check whether paging is enabled
add is_pae to check whether physical address extension is enabled.
Tracked-On: #1379
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
For SBL platform, struct acrn_vcpu_regs are used as boot context.
Now the boot_ctx is only for UEFI platform. Rename struct boot_ctx
to efi_context.
Tracked-On: #1231
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Add struct acrn_vcpu_regs and make struct boot_ctx based on
struct acrn_vcpu_regs.
vm0_boot_context is also changed from struct boot_ctx to struct
acrn_vcpu_regs.
Tracked-On: #1231
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
MISRA-C requires that there should be no unused parameters in
functions.
In some cases, we will keep the unused parameters.
vmexit handler is one example. It is used as function pointer.
Some of the vmexit handlers use the input parameter 'vcpu', some of
them don't. We still need to keep the unused parameters 'vcpu' for
those handlers don't use 'vcpu'.
This patch removes the unused parameters that is not being used
unconditionally.
v1 -> v2:
* remove the non-implemented API 'vlapic_id_write_handler'
Tracked-On: #861
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
MISRAC has requirements about literal value requires a U suffix and
signed/unsigned conversion with cast. This patch is used to solve
these violations.
v1->v2
*Drop the cast of sz from uint32_t to int32_t, the signed/unsigned
violation of nchars will be solved by other patch together with
printf/sprintf/console/vuart/uart code.
*Delete the unnecessary L suffix of shifting operand.
Tracked-On: #861
Signed-off-by: Junjun Shan <junjun.shan@intel.com>
Reviewed by: Junjie Mao <junjie.mao@intel.com>
-- update 'vlapic' in 'struct vcpu_arch' from pointer
to instance
-- add inline function(vcpu_vlapic) in vcpu.h
Tracked-On: #861
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
- convert function like macros to inline functions based on MISRA-C
requirement
- remove some unused and duplicated macros
Tracked-On: #861
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
-- Change vmx_off/exec_vmxon/exec_vmclear/exec_vmptrld/
exec_vmxon_instr/init_vmcs to void type
-- for vmxon/vmclear/vmptrld, add pre-conditions to
guarantee sucessful execution.
Tracked-On: #861
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Check if the VMX capability is locked with incorrect value,
at the time when HV do the hardware capability detect.
Tracked-On: #861
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Remove vmxon_region_pa from structure per_cpu_region,
and define vmxon_region inside per_cpu_region.
Tracked-On: #861
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
MISRA-C requires that the controlling expression of an if statement or
an iteration-statement shall be Boolean type.
Tracked-On: #861
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
This patch fixes the following issues:
- Assignment operation in expression.
- For loop incrementation is not simple.
- No brackets to loop body.
- Use of comma operator.
v1 -> v2:
* Replace &x->y with &(x->y) based on our new coding rule
Tracked-On: #861
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
- by default, ACRN will not support platform without
below APICv features:
-- Use TPR shadow
-- APIC-register virtualization
- remove mmio emualtion of local APIC for guest
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
The apicv is one hardware acceleration feature of vlapic. All vlapic
APIs should keep vlapic_ as the prefix.
Signed-off-by: Yu Wang <yu1.wang@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Since these APIs always return 0,
change them to void type,
vcpu_set_cr0()
vmx_write_cr0()
vcpu_set_cr4()
vmx_write_cr4()
kick_notification()
tsc_deadline_handler()
dmar_fault_handler()
ptdev_interrupt_handler()
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
MISRAC requires that the array size should be declared explicitly.
This patch fixes the issues caused by vm0_boot_context.
Fix pattern is like below:
extern char start_of_ROM, end_of_ROM, start_of_FLASH;
memcpy (& start_of_FLASH, & start_of_ROM, & end_of_ROM - &
start_of_ROM);
Tracked-On: #861
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
removed some unnecessary variables and functions.
v1-->v2:
Replace div-by-zero with an inline ASM code
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
The bracket is required when the level of precedence of
the operators is less than 13. Add the bracket to logical
conjunctions. The commit applys the rule to the files under
Signed-off-by: Yang, Yu-chu <yu-chu.yang@intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Current EPT check runs after EPT enabling in init_exec_ctrl. This
patch fixes wrong order.
Signed-off-by: Edwin Zhai <edwin.zhai@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
In current code, VM0 BSP start mode is hardcoded, in this patch VM0 BSP
start mode is decided by the boot context prepared by bootloader/BIOS.
In current code, VM0 BSP VMCS is override only on UEFI platform.
In this patch, VM0 BSP VMCS is override on both SBL & UEFI platforms.
Also restructure the code of guest init code.
In this patch, a vcpu run_context is initilaized first according to vcpu mode.
Then write the value to vmcs according to run_context value.
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The structures defined in acrn_efi.h is x86 related, move it
to acrh/x86/guest/.
Also, the headfile will be used on both SBL & UEFI platforms,
rename it to vm0_boot.h
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
move most of fields from run_context into ext_context for world switch.
these fields do not need doing runtime save/restore during vm exit/entry.
v3:
- update cr0/cr4 registers switch method
v2:
- use struct name ext_context instead of saved_context
- updated according to previous v2 patch
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
there will be 3 types of vcpu runtime contexts:
- runtime contexts always saved/restored during VM exit/entry, which
include general registers rax/rcx/rdx/rbx/rbp/rsi/rdi/r8~r15, cr2 and
msr for spectre control (ia32_spec_ctrl)
- runtime contexts on-demand cached/updated during VM exit/entry, which
include frequently used registers rsp, rip, efer, rflags, cr0 and cr4
- runtime contexts always read/write from/to VMCS, which include left
registers not in above
this patch add get/set register APIs for vcpu runtime contexts, and unified
the save/restore method for them according to above description.
v3:
- update vcpu_get/set_cr0/4 as unified interface to get/set guest cr0/cr4,
use on-demand cache for reading, but always write to VMCS for writing.
v2:
- use reg_cached/reg_updated for on-demand runtime contexts
- always read/write cr3 from/to VMCS
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
There are potential value outside range of underlying type
in some assignment expressions. This violates Rule 10.3 or
Rule 10.4 of MISRA C:2012.
BTW, all operations shall be conducted in exactly the same
arithmetic (underlying) type, otherwise, there is a
value outside range violation.
Update related assignment expressions.
V1-->V2:
* Fix potential overflow in "pit_calibrate_tsc";
* Move PTDEV_INVALID_PIN definition before
get_entry_info since this MACRO is only used by
debug function.
Signed-off-by: Xiangyang Wu <xiangyang.wu@linux.intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
Two improvements:
Firstly, disable EOI VMEXIT for all vectors by default. Only the level
sensitive irq need to set it due to need emulate send EOI to vioapic to
clear Remote IRR bit.
Secondly, to clear RVI(Requesting virtual interrupt) and SVI(Servicing
virtual interrupt) bits.
Signed-off-by: Yu Wang <yu1.wang@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Reshuffle VMX init code, and check both allowed 0-settings and
1-settings of related MSR to make the final VMCS control value.
Signed-off-by: Edwin Zhai <edwin.zhai@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
1. We could explicitly use specific register to avoid one more
register allocated.
2. If we explicitly assign register, it's not neccessary to
add the register in clobber list according to gcc mannual.
3. For vmptrld, we add memory to clobber list also.
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Reviewed-by: Edwin Zhai <edwin.zhai@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Now, we let guest own most CR4 bit. Which means guest
handles whether the CR4 writting is invalid or not and
GP injection if it's invalid writing.
Two bits are exception here:
we filter VMX and PCID feature to guest (which means
they are supported on native).
So we can't depends on guest to inject GP for these bits.
Instead, we should explicitly trap these CR4 bits update
and inject GP to guest from HV.
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
According to SDM:
writing a nonzero value to 63:32 bits of CR0 and CR4 results #GP(0).
writing a nonzero value to reserved bit of CR4 results #GP(0).
We merge the check with always off mask of CR0 and CR4.
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Move the check to delicated function and do the check as early
as possible.
Add more check and inject GP to guest if check fails according to
SDM.
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Reviewed-by: Anthony Xu <anthony.xu@intel.com>
Fix x86 directory violations which related to integer problems,
some of problems are skipped because of ldra's false positive.
V1->V2 1.modified the code style
2.fix all macro VM_EXIT_IO_INSTRUCTION related
Signed-off-by: Huihuang Shi <huihuang.shi@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
In the hypervisor, there are many casts from
an void pointer to integer pointer, then from
integer pointer to structure pointer.
These pointer castings are detected by static analysis
tool. All pointer casts are violations, There are
some duplicated pointer cast. This will make deviation
analysis complex.
BTW, there are one useless pointer casting and one
wrong pointer casting in the hypervisor.
Remvoe duplicated pointer casts to make deviation analysis
simple;
Remove one useless pointer casting;
Update one wrong pointer casting.
Note: There are many void type pointer casts, non-void type
pointer is casted to void type pointer, char type pointer casts,
non-char type pointer is casted to char type pointer. These pointer
casting is need by the memory management module, IO moudle etc.
Deviation analysis will be made and recoded in the analysis report.
V1-->V2:
Fix mixing pointer and array voilation.
V2-->V3:
Remvoe pointer casting from integer pointer into
non-void/non-char pointer directly;
Remove redundant type conversion.
Signed-off-by: Xiangyang Wu <xiangyang.wu@intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
Removed comment out unused code in vmexit.c, sprintf.c and vmcall.c
Minor fix in vmx.c to prevent Misra-c consider it as a piece of
code.
Signed-off-by: Yang, Yu-chu <yu-chu.yang@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Most of the time, we use the virtual address of EPT PMl4 table,
not physical address.
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
MISRA C requires that a 'if' statement followed by one or more 'else if'
statement shall be terminated by an 'else' statement which contains either
side-effect or a comment, to ensure that conditions are considered
exhaustively.
Note that a simple 'if' statement is not required to be terminated by 'else'.
This patch fixes such violations by either refactoring the code or add the
'else' statement with either a comment (describing why this case can be skipped)
or logging the event. It may not be satisfactory for the release version where
logging is no-op, but properly handling these non-trivial cases is out of the
scope of this patch.
v1 -> v2:
* Fix unintended semantic changes in add_(msix|intx)_remapping and
io_instr_vmexit_handler.
* Simplify boolean checks in vpic_ocw2.
* Rephrase the comment in strtol_deci.
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
There are some integer type conversions in the VMX, timer
and MTTR module detected by static analysis tool.
Update related integer type in VMX, timer and MTTR
module.
Add related constant value with 'U/UL' suffix.
V1-->V2:
Resolve few rebase conflicts.
V2-->V3:
Add 'h' for uint16_t argument in log function;
Update the type of temp variable 'type' as uint8_t
in MTTR module to reduce type conversion.
Signed-off-by: Xiangyang Wu <xiangyang.wu@intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
In the hypervisor, VMCS fields include 16-bit fields,
32-bit fields, 64-bit fields and natural-width fields.
In the current implement, there are exec_vmread/exec_vmwrite
used for accessing 32-bit fields, 64-bit field and
natural-width fields. This usage will confue developer.
So there are many type casting for the return value and
parameters vmread/vmwrite operations.
Since exec_vmread/exec_vmwrite and exec_vmread64/exec_vmwrite64
are the same, update current exec_vmread/exec_vmwrite
implement into exec_vmread64/exec_vmwrite64 implement
and add MACRO define for exec_vmread/exec_vmwrite in
head file;
To access 64-bit fields in VMCS, callers use
exec_vmread64/exec_vmwrite64;
Update related variables type for vmread/vmwrite operations;
Update related caller according to VMCS fields size.
Note:Natural-width fields have 64 bits on processors
that support Intel 64 architecture.To access natural-width
fields in VMCS, callers still use exec_vmread/exec_vmwrite,
keep the current implementation.
V1--V2:
This is new part of this patch serial to only
update 64-bit vmread/vmread opertions and related
caller, for netural width fields, still use exec_vmread
or exec_vmwrite.
V2-->V3:
Fix few mistake updations for netural fields in VMCS,
just keep exec_vmread/exec_vmwrite to access them;
Fix few mistake updations for 64-bit fields in VMCS.
V3--V4:
Add "016ll" for 64-bit variable in log function;
Few updates for coding style;
Rename lssd32_idx as tr_sel in VMX module.
V4-->V5:
Use CPU_NATURAL_LAST in the vm_get_register and
vm_set_register to make condition statement more
understandable.
Signed-off-by: Xiangyang Wu <xiangyang.wu@intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
