With SMAP enabled, hypervisor can't access pages that
owned by guest(either SOS or UOS), and an override is
is provided: stac()/clac() to enable/disable access to
guest's memory pages.
Pre-conditon:
Mark hypervisor owned pages as supervisor mode (U/S = 0),
and set all othter memory pages as user mode (U/S = 1).
Tracked-On: #2056
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
hypervisor initilization component triggered by boot component,
and it calls different components initilization functions from
the highest layer.
this patch added init.c and move reorged cpu init functions into
it, keep hardware management functions in cpu.c but move other
components' init function into init.c.
the hypervisor initilization components will call:
- init_cpu_pre
- init_cpu_post
- init_bsp
- init_debug_pre
- init_debug_post
- init_guest
- init_passthru
- enter_guest_mode
the hypervisor initilization component include files:
arch/x86/init.c
include/arch/x86/init.h
this component is higest layer, so there is no reverse dependencies for it.
v2:
- separate into 2 patches, 1 for reorg, 1 for pure move.
Tracked-On: #1842
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Xu, Anthony <anthony.xu@intel.com>
On platforms, that do not support APICv register virtualization, all the
x2APIC MSRs need to intercepted by ACRN for emulation.
Tracked-On: #1973
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
replace CPU_PAGE_MASK with PAGE_MASK
These two MACROs are duplicated and PAGE_MASK is a more reasonable name.
Tracked-On: #861
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
- replace CPU_PAGE_SHIFT with PAGE_SHIFT
These two MACROs are duplicated and PAGE_SHIFT is a more
reasonable name.
- remove unused MACROs related to page shift in cpu.h
Tracked-On: #861
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
replace CPU_PAGE_SIZE with PAGE_SIZE
These two MACROs are duplicated and PAGE_SIZE is a more reasonable name.
Tracked-On: #861
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
1. CPU_SEG_WRITE->CPU_SEG_READ: it's actually seg read
2. 0x%hu -> 0x%x: it need print hex format
Tracked-On: #1833
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Misra C reqires assembly code should comply with
the rules list below:
The assembly code's functionality should match the function's
name.If not,pls encapsulate the assembly code and give a suitable
name for describing the functionality.
V1->V2:
1.remove the dead code
2.update detail comment
V2->V3:
1.replace the macro name with upper case.
2.remove the typedef and rename the struct name
"_descriptor_table_" to "descriptor_table".
Tracked-On: #861
Signed-off-by: Huihuang Shi <huihuang.shi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
- flush L1 cache before VM entry only on platform
affected by L1TF
- flush operation is configurable by below MACRO:
--CONFIG_L1D_FLUSH_VMENTRY_ENABLED
Tracked-On: #1672
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
--Removed MAX_PCPU_NUM in cpu.h
--Changed the default value from 128 to 8 for
MAX_PCPU_NUM
Tracked-On: #861
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Li, Fei1 <fei1.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
MISRA-C required the suffix(U/UL), such as:
(1) ---> (1U)
(1) ---> (1UL)
(1U << 0) ---> (1U << 0U)
This patch will add the suffix(U/UL) to come up MISRA-C into
hypervisor/include directory.
Tracked-On: #1468
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
to enable APICv Posted interrupt supported, following the
specifications defined in Intel SDM Section #29.6, Volume3.
Posted-interrupt processing is a feature by which a processor
processes the virtual interrupts by recording them as pending
on the virtual-APIC page.
Injecting interrupts to VCPU from remote CPU without causing
VM exit on the destination, following steps in SDM Section 29.6,volume3:
Tracked-On: #1447
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Now we have name reuse definitions in hypervisor as following:
"enum cpu_state cpu_state" in per_cpu.h,
"struct shell_cmd *shell_cmd" in shell_priv.h.
MISRAC requires that tag names shall not be reused anywhere
with in a program.So these definitions violate MISRAC rules
"identifier resue".This patch is used to fix it.
1. modify the definitions to "enum pcpu_boot_state boot_state"
and "struct shell_cmd *cmds".
2. modifty the relevant usage.
v1->v2
update commit message to be more explicit.
v2->v3
update the enum definition.
Tracked-On: #861
Signed-off-by: Junjun Shan <junjun.shan@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
There are chances that names with leading underscore declared by
developers are conflict with the ones reserved for the compiler.
What this patch does:
- rename these functions/variables/macros starting with
underscore to avoid such unintentational mistakes.
- remove gpr.h without any contents
Tracked-On: #861
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
We will define the hypercall to set acrn vcpu registers and
move this struct to acrn_commmon.h for reference from hypercall
parameter definition.
Tracked-On: #1231
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
MISRA-C requires that there should be no unused parameters in
functions.
In some cases, we will keep the unused parameters.
vmexit handler is one example. It is used as function pointer.
Some of the vmexit handlers use the input parameter 'vcpu', some of
them don't. We still need to keep the unused parameters 'vcpu' for
those handlers don't use 'vcpu'.
This patch removes the unused parameters that is not being used
unconditionally.
v1 -> v2:
* remove the non-implemented API 'vlapic_id_write_handler'
Tracked-On: #861
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
- convert function like macros to inline functions based on MISRA-C
requirement
- remove some unused and duplicated macros
Tracked-On: #861
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
Add the brackets for Macro parameter to avoid the unintentional
mistakes.
A simple example that may cause mistakes:
#define minus(x) -x
When the following call is made,
z = minus(a-b)
it becomes:
z = -a-b;
where "-a - b" is equivalent to "(-a) - b" rather than "- (a - b)", as
expected.
v2 -> v3:
* convert DMAR_WAIT_COMPLETION to inline function
* remove the macro PIC_PIN_FOREACH and implement the well-formed
for loop in each case
* replace __CPP_STRING with STRINGIFY and remove the unused CPP_STRING
v1 -> v2:
* Remove some changes to function like macro since MISRA-C requires to
use inline functions if it is possible.
These MACRO brackets violations will be fixed together when fixing
other issues related to function like macro.
Tracked-On: #861
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
MISRA-C requires that each parameter in the MACRO shall be in brackets.
In some cases, adding brackets for all of the parameters may not be a
perfect solution.
For example, it may affect the code readability when there are many
parameters used in the MACRO.
And duplicated brackets will appear when one MACRO called another MACRO
which is using same parameters.
This patch convert some MACROs to inline functions to avoid such cases.
v1 -> v2:
* Remove the unnecessary changes in hypervisor/bsp/uefi/efi/boot.h
Tracked-On: #861
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
Since vmexit handling in ACRN partition mode is not complex (since no SOS and
all devices passthru), interrupts can stay disabled in root mode during
vmexit handling.
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
- by default, ACRN will not support platform without
below APICv features:
-- Use TPR shadow
-- APIC-register virtualization
- remove mmio emualtion of local APIC for guest
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Use func(void) rather than func() for the function declaration and
definition based on MISRAC requirement.
Tracked-On: #861
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
pcpu_sync_sleep monitor "uint64_t sync" change to "1UL << mask_bit",
which is not very clear to take use of it.
change it to wait_sync_change, means monitor "uint64_t sync" change to
"wake_sync", make the function clear to use.
And expose it for the usage of the following patches.
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
MISARC has requirements about Marco redefinition, usage of ++ or -- and
assignment operator in boolean expression. This patch is used to solve
these violations.
The modifications are summarized as following:
1.The HC_VM_SET_MEMORY_REGION, HC_VM_GPA2HPA, HC_VM_SET_MEMORY_REGIONS are
redefined twice in acrn_hv_des.h, so delete them to solve the macro
redefinition violations.
2.The macro BUS_LOCK are redefined in bits.h and atomic.h, then delete
the declaration in both two files, add a new declaration in cpu.h and
include the header file.
3.modify the code to solve the improper usage of -- operators in string.c.
4.modify the while loop to for loop to avoid assignment operator in
boolean expression in vlapic.c.
v1 -> v2:
*Modify the format of commit logs and signed-off name.
*Modify the code format from 'd = d-1;' to 'd--;' to be better.
Signed-off-by: Junjun Shan <junjun.shan@intel.com>
Current EPT check runs after EPT enabling in init_exec_ctrl. This
patch fixes wrong order.
Signed-off-by: Edwin Zhai <edwin.zhai@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Use func(void) rather than func() for the function declaration and
definition based on MISRAC requirement.
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
add wrap function cpu_do_idle in default_idle to handle arch cpu specific
idle operation.
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
there will be 3 types of vcpu runtime contexts:
- runtime contexts always saved/restored during VM exit/entry, which
include general registers rax/rcx/rdx/rbx/rbp/rsi/rdi/r8~r15, cr2 and
msr for spectre control (ia32_spec_ctrl)
- runtime contexts on-demand cached/updated during VM exit/entry, which
include frequently used registers rsp, rip, efer, rflags, cr0 and cr4
- runtime contexts always read/write from/to VMCS, which include left
registers not in above
this patch add get/set register APIs for vcpu runtime contexts, and unified
the save/restore method for them according to above description.
v3:
- update vcpu_get/set_cr0/4 as unified interface to get/set guest cr0/cr4,
use on-demand cache for reading, but always write to VMCS for writing.
v2:
- use reg_cached/reg_updated for on-demand runtime contexts
- always read/write cr3 from/to VMCS
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
'hv_main()' wraps several logic which has no dependencies
each other(enable VMX, prepare to create service os VM..),
in this case, split this function to make code logic clear.
remove 'is_vm0_bsp()' & 'hv_main()'
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
MISRAC requires that the array size should be declared explicitly.
This patch fixes the issues caused by the arrays that are defined in
link_ram.ld.in or assembly file.
v1 -> v2:
* Update the solution based on the info from the following link.
https://sourceware.org/binutils/docs/ld/Source-Code-Reference.html
Fix pattern is like below:
extern char start_of_ROM, end_of_ROM, start_of_FLASH;
memcpy (& start_of_FLASH, & start_of_ROM, & end_of_ROM - &
start_of_ROM);
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
According to SDM:
writing a nonzero value to 63:32 bits of CR0 and CR4 results #GP(0).
writing a nonzero value to reserved bit of CR4 results #GP(0).
We merge the check with always off mask of CR0 and CR4.
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
There are some integer type conversions in the VMX, timer
and MTTR module detected by static analysis tool.
Update related integer type in VMX, timer and MTTR
module.
Add related constant value with 'U/UL' suffix.
V1-->V2:
Resolve few rebase conflicts.
V2-->V3:
Add 'h' for uint16_t argument in log function;
Update the type of temp variable 'type' as uint8_t
in MTTR module to reduce type conversion.
Signed-off-by: Xiangyang Wu <xiangyang.wu@intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
Includes header file of non-static function, and declare the
in-file use function static.
Signed-off-by: Yang, Yu-chu <yu-chu.yang@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Use the array for lapic_id directly to avoid the unnecessary pointer
arithmetic.
With current implementation,
lapic_id_base is always a byte array with CPU_PAGE_SIZE elements
What this patch does:
- replace 'uint8_t *lapic_id_base' with 'uint8_t
lapic_id_array[CPU_PAGE_SIZE]' to make the boundary explicit
- add a range check to ensure that there is no overflow
v2 -> v3:
* update the array size of lapic_id_array per discussion with Fengwei
v1 -> v2:
* remove the unnecessary range check in parse_madt in cpu.c
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
- move all relocatoin code from cpu.c and cpu.h to reloc.c and reloc.h
- no any logic changes
Signed-off-by: Zide Chen <zide.chen@intel.com>
Reviewed-by: Yin fengwei <fengwei.yin@intel.com>
In the current memory module, there are many constatn value
without U/UL suffix, it is reported as MISRA C violations by
static analysis tool.
Add 'U/UL' suffix for unsigned contant value in memory module
as needed.
Note:In the most case, CPU_PAGE_SIZE(0x1000) is used as
unsigned integer contant value, so CPU_PAGE_SIZE is defined
as unsigned integer contant value, and it is safety converted
into unsigned long type according to MISRA C standard.
Signed-off-by: Xiangyang Wu <xiangyang.wu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
In the data struct cpuinfo_x86, some field names have
prefix x86, others don't have prefix.
In order to unify names, update field names of struct
cpuinfo_x86 as per its usage purpose, remove prefix x86.
V1-->V2:
Resolve conflict in cpu.c by rebase command
V2-->V3:
Remove track-on id as per jack's comments
Signed-off-by: Xiangyang Wu <xiangyang.wu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This patch cleans up the integral type violations to MISRA C rules, mostly
related to signed constants that should be unsigned but also spelling out two
integer narrowing and dropping some macros negating unsigned integers.
v1 -> v2:
* Drop INT_ROUNDUPx macros since they are never used.
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
According to MISRA C:2012, suffix 'U/UL' shall be for
unsigned const value, the member of enum variable should
not be used to compare with integer variable.
Add 'U/UL' for unsigned const value in the CPU module;
Use Macro insteading of enum feature_word since the member
of feature_word is used to compare with integer variable;
Use hex number insteading of Macro in the assembly code.
V1-->V2:
Update the suffix of some constant value as 'UL'
according to its'storage variable;
Split MACRO updates used in the assembly code
in other patch.
Signed-off-by: Xiangyang Wu <xiangyang.wu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
- rename 'cpu_set_logical_id()' to 'set_current_cpu_id()'
- rename 'cpu_find_logical_id()' to 'get_cpu_id_from_lapic_id()'
- some clean up in cpu.c & trampolines.s
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
There are extra type conversion in the HV since logical_id
type is uint32_t and the input argument of bitmap operations
is uint16_t. BTW, the name of logical_id is not clear enough
to express its usage.
So the following updates are made in this patch:
Update logical_id type as unit_16 to reduce type casting;
Update related print argument;
Rename related logical_id as pcpu_id as needed.
Note: logical_id in the interrupt_init definition have been
updated in cpu_id cleanup patch.
Signed-off-by: Xiangyang Wu <xiangyang.wu@intel.com>
Misra C required signed/unsigned conversion with cast.
V1->V2:
a.split patch to patch series
V2->V3:
a.change the uint64_t type numeric constant's suffix from U to UL
Signed-off-by: Huihuang Shi <huihuang.shi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
To reduce type conversion in HV:
Update return type of function ffs64 and ffz64 as uint16;
For ffs64, when the input is zero, INVALID_BIT_INDEX is returned;
Update temporary variable type and return value check of caller
when it call ffs64 or ffz64;
Note: In the allocate_mem, there is no return value checking for
calling ffz64, this will be updated latter.
V1-->V2:
INVALID_BIT_INDEX instead of INVALID_NUMBER
Coding style fixing;
INVALID_CPU_ID instead of INVALID_PCPU_ID or INVALID_VCPU_ID;
"%hu" is used to print vcpu id (uint16_t);
Add "U/UL" for constant value as needed.
V2-->V3:
ffs64 return INVALID_BIT_INDEX directly when
the input value is zero;
Remove excess "%hu" updates.
V3-->V4:
Clean up the comments of ffs64;
Add "U" for constant value as needed.
Signed-off-by: Xiangyang Wu <xiangyang.wu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
enum cpu state is better than cpu state macro.
V1->V2:
move enum cpu_state under #ifndef ASSEMBLER MACRO to avoid
assembler compiler scan.
Signed-off-by: Huihuang Shi <huihuang.shi@intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
operations
For reducing sign conversion in hypervisor:
Update parameters of bitmap operations as unsigned type;
Update the input of related caller as unsigned type when the
caller's input parameter is const variable or the variable is
only used by bitmap operations.
V1-->V2:
(1) Explicit casting for the first parameter
of all bitmap operations;
(2) Remove mask operation for explicit casting
of all bitmap operations, since masking is
useless. Otherwise, this trucation is dangerous.
V2-->V3:
(1) Explicit casting for all bitmap operations parameter;
(2) Masking bit offset with 6-bit;
(3) Add few comments about bit offset.
V3-->V4:
add '\' for some statement of bitmap macro
Signed-off-by: Xiangyang Wu <xiangyang.wu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
