Emulate Device ID, Vendor ID and MSE(Memory Space Enable) bit in
configuration space for an assigned VF, initialize assgined VF Bars.
The Device ID comes from PF's SRIOV capability
The Vendor ID comes from PF's Vendor ID
The PCI MSE bit always be set when VM reads from an assigned VF.
Tracked-On: #4433
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
If a VF instance is disabled, we didn’t remove the vdev instance,
only set the vdev as a zombie vdev instance, indicating that it
cannot be accessed anymore.
Tracked-On: #4433
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Change name find_vdev to find_available_vdev and add comments
Tracked-On: #4433
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The VF BARs are initialized by its PF SRIOV capability
Tracked-On: #4433
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Refine coding style to wrap msix map/unmap operations, clean up repeated
assignments for msix mmio_hpa and mmio_size.
Tracked-On: #4433
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Add _v prefix for some function name to indicate this function wants to operate
on virtual CFG space or virtual BAR register.
Tracked-On: #4371
Signed-off-by: Li Fei1 <fei1.li@intel.com>
Since there is no RTVM requirement for sdc2 scenario, replace uuid
495ae2e5-2603-4d64-af76-d4bc5a8ec0e5 which is dedicated to RTVM with
615db82a-e189-4b4f-8dbb-d321343e4ab3
Tracked-On: #4472
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Since there is no RTVM requirement for sdc2 scenario, replace uuid
495ae2e5-2603-4d64-af76-d4bc5a8ec0e5 which is dedicated to RTVM with
615db82a-e189-4b4f-8dbb-d321343e4ab3
Tracked-On: #4472
Signed-off-by: fuzhongl <fuzhong.liu@intel.com>
Reviewed-by: Sun Victor <victor.sun@intel.com>
Removed the pci_vdev_write_cfg_u8/u16/u32 APIs and only used
pci_vdev_write_cfg as the API for writing vdev's cfgdata
Tracked-On: #4433
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The SOS_BOOTARGS_DIFF which defined in config xml has included most diff
bootargs, so the prints in vm_configuraton_h.py is redundant and would
cause wrong boot param for SOS VM.
Tracked-On: #4470
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
In Commit 127c73c3, we remove the strict check for adding page table mapping. However,
we just replace the ASSERT of pr_fatal in add_pte. This is not enough. We still add
the virtual address by 4K if the page table mapping is exist and check the virtual
address is over the virtual address region for this mapping. Otherwise, The complain
will continue for 512 times at most.
Tracked-On: #3475
Signed-off-by: Li Fei1 <fei1.li@intel.com>
Add cfg_header_read_cfg and cfg_header_write_cfg to handle the 1st 64B
CFG Space header PCI configuration space.
Only Command and Status Registers are pass through;
Only Command and Status Registers and Base Address Registers are writable.
In order to implement this, we add two type bit mask for per 4B register:
pass through mask and read-only mask. When pass through bit mask is set, this
means this bit of this 4B register is pass through, otherwise, it is virtualized;
When read-only mask is set, this means this bit of this 4B register is read-only,
otherwise, it's writable. We should write it to physical CFG space or virtual
CFG space base on whether the pass through bit mask is set or not.
Tracked-On: #4371
Signed-off-by: Li Fei1 <fei1.li@intel.com>
1. Renames DEFINE_IOAPIC_SID with DEFINE_INTX_SID as the virtual source can
be IOAPIC or PIC
2. Rename the src member of source_id.intx_id to ctlr to indicate interrupt
controller
2. Changes the type of src member of source_id.intx_id from uint32_t to
enum with INTX_CTLR_IOAPIC and INTX_CTLR_PIC
Tracked-On: #4447
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
This patch adds support for,
1. Storing MBA resource and its max supported clos value
in the target xml file under clos subsection.
2. Generating board.c file with MBA RDT resource.
Tracked-On: #3725
Signed-off-by: Vijay Dhanraj <vijay.dhanraj@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
for vpci_bridge it is better just write the virtual configure space,
so move out the PCI bridge phyiscal cfg write to pci.c
also add some rules in config pci bridge.
Tracked-On: #3381
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
For SRIOV needs ARI support, so enable it in HV if
the PCI bridge support it.
TODO:
need check all the PCI devices under this bridge can support ARI,
if not, it is better not enable it as PCIe spec. That check will be
done when scanning PCI devices.
Tracked-On: #3381
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
- remove limit of CONFIG_HV_RAM_SIZE which is for scenario of 2 VMs only,
the default size from Kconfig could build scenario which up to 5 VMs;
- rename whl-ipc-i5_acpi_info.h to platform_acpi_info.h, since the former
one should be generated by acrn-config tool;
- add SOS related macros in misc.h, otherwise build scenarios which has
SOS VM would be failed;
Tracked-On: #4463
Signed-off-by: Victor Sun <victor.sun@intel.com>
Let the ACRN HV to do this in shutdown sequence. In this case, the RTVM could be
still alive if something wrong happened to cause the DM died.
Tracked-On: #4428
Signed-off-by: Li Fei1 <fei1.li@intel.com>
- remove .data and .text directives. We want to place all the boot data and
text in the .entry section since the boot code is different from others
in terms of relocation fixup. With this change, the page tables are in
entry section now and it's aligned at 4KB.
- regardless CONFIG_MULTIBOOT2 is set or not, the 64-bit entry offset is
fixed at 0x1200:
0x00 -- 0x10: Multiboot1 header
0x10 -- 0x88: Multiboot2 header if CONFIG_MULTIBOOT2 is set
0x1000: start of entry section: cpu_primary_start_32
0x1200: cpu_primary_start_64 (thanks to the '.org 0x200' directive)
GDT tables
initial page tables
etc.
Tracked-On: #4441
Reviewed-by: Fengwei Yin <fengwei.yin@intel.com>
Signed-off-by: Zide Chen <zide.chen@intel.com>
This is to enable relocation for code32.
- RIP relative addressing is available in x86-64 only so we manually add
relocation delta to the target symbols to fixup code32.
- both code32 and code64 need to load GDT hence both need to fixup GDT
pointer. This patch declares separate GDT pointer cpu_primary64_gdt_ptr
for code64 to avoid double fixup.
- manually fixup cpu_primary64_gdt_ptr in code64, but not rely on relocate()
to do that. Otherwise it's very confusing that symbols from same file could
be fixed up externally by relocate() or self-relocated.
- to make it clear, define a new symbol ld_entry_end representing the end of
the boot code that needs manually fixup, and use this symbol in relocate()
to filter out all symbols belong to the entry sections.
Tracked-On: #4441
Reviewed-by: Fengwei Yin <fengwei.yin@intel.com>
Signed-off-by: Zide Chen <zide.chen@intel.com>
GRUB multiboot2 doesn't support relocation for ELF, which means it can't
load acrn.32.out to other address other than the one specified in ELF
header. Thus we need to use the raw binary file acrn.bin, and add
address/entry address/relocatable tags to instruct multiboot2 loader
how to load the raw binary.
Tracked-On: #4441
Reviewed-by: Fengwei Yin <fengwei.yin@intel.com>
Signed-off-by: Zide Chen <zide.chen@intel.com>
In direct boot mode, boot_context[] which is saved from cpu_primary_save_32()
is no longer used since commit 6beb34c3cb ("vm_load: update init gdt
preparation"). Thus, the call to it and the function itself can be removed.
Tracked-On: #4441
Reviewed-by: Fengwei Yin <fengwei.yin@intel.com>
Signed-off-by: Zide Chen <zide.chen@intel.com>
reduce the use of similar APIs (particularly the name confusion) for
CFG space read/write.
Tracked-On: #4433
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Make the name of the functions more accurate
Tracked-On: #4433
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Add some pre-assumption and safety check for PCIe ECAM:
1) ACRN only support platforms with PCIe ECAM to access PCIe device CFG space;
2) Must not use ECAM to access PCIe device CFG space before
pci_switch_to_mmio_cfg_ops was called. (In release version, ACRN didn't support
IO port Mechanism. ECAM is the only way to access the PCIe device CFG space).
Tracked-On: #4371
Signed-off-by: Li Fei1 <fei1.li@intel.com>
One argument is missing for the function ptirq_alloc_entry.
This patch fixes the doc generation error.
Tracked-On: #3882
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
- change variable name from hpa to hva because in this function we are
dealing with hva, not hpa.
- can get the address of ld_text_end by directly referring to this symbol,
because relative addressing yields the correct hva, not the hva before
relocation.
Tracked-On: #4441
Signed-off-by: Zide Chen <zide.chen@intel.com>
The pci_read_cap and pci_read_ext_cap are used to enumerate PCI
legacy capability and extended capability.
Change the name pci_read_cap to pci_enumerate_cap
Change the name pci_read_ext_cap to pci_enumerate_ext_cap
Tracked-On: #4433
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Fixed misspellings and rst formatting issues.
Added ptdev.h to the list of include file for doxygen
Tracked-On: #3882
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Add doxygen style comments to ptdev public APIs.
Add these API descriptions to group acrn_passthrough.
Tracked-On: #3882
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
This patch updates board.c files for RDT MBA on existing
platforms. Also, fixes setting RDT flag in WHL config file.
Tracked-On: #3725
Signed-off-by: Vijay Dhanraj <vijay.dhanraj@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This patch adds RDT MBA support to detect, configure and
and setup MBA throttle registers based on VM configuration.
Tracked-On: #3725
Signed-off-by: Vijay Dhanraj <vijay.dhanraj@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Currently config tool generated 'console=/dev/ttySn' in boot cmdline
for logical_partiton scenario, need to strip '/dev/' to avoid kernel
boot issue.
Tracked-On: #4451
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
create new pdev and vdev structures for a SRIOV VF device initialization
Tracked-On: #4433
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Add a new parameter pf_vdev for function vpci_init_vdev to support SRIOV
VF vdev initializaiton.
Tracked-On: #4433
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The init_one_dev_config is used to initialize a acrn_vm_pci_dev_config
SRIOV needs a explicit acrn_vm_pci_dev_config to create a VF vdev,so
refine it to return acrn_vm_pci_dev_config.
Tracked-On: #4433
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Due to SRIOV VF physical device needs to be initialized when
VF_ENABLE is set and a SRIOV VF physical device initialization
is same with standard PCIe physical device, so expose the
init_pdev for SRIOV VF physical device initialization.
Tracked-On: #4433
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
All SRIOV VF physical devices don't have bars in configuration space,
they are from the VF associated PF's VF_BAR registers of SRIOV capability.
Adding a vbars data structure in pci_cap_sriov data structure to store
SRIOV VF_BAR information, so that each VF bars can be initialized directly
through the vbars instead multiple accessing of the PF VF_BAR registers.
Tracked-On: #4433
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
To support SRIOV capability initialization, add a new parameter
is_sriov_pf_vdev for init_vdev_pt function.
If parameter is_sriov_pf_vdev of function init_vdev_pt is true,
then function init_vdev_pt initializes the vdev's SRIOV capability.
Tracked-On: #4433
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Devices that support SR-IOV can expose their capabilities in
lspci -vv command as below. The offline tool, instead of picking
up the bios exposed memory region(bc000000) for the devices ends
picking up the SR-IOV memory region(00000000c0000000) and generates
VBAR address (in pci_devices.h). This is incorrect. This patch
fixes the offline tool to take the right memory region as the
VBAR address.
Sample lspic -vv log:
67:00.0 Ethernet controller: Intel Corporation Ethernet Connection
X722 for 10GbE backplane (rev 09)
Subsystem: Intel Corporation Device 0000
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
Latency: 0
Interrupt: pin A routed to IRQ 61
Region 0: Memory at bc000000 (64-bit, prefetchable) [size=16M]
Region 3: Memory at c1000000 (64-bit, prefetchable) [size=32K]
Capabilities: [160 v1] Single Root I/O Virtualization (SR-IOV)
IOVCap: Migration-, Interrupt Message Number: 000
IOVCtl: Enable- Migration- Interrupt- MSE- ARIHierarchy+
IOVSta: Migration-
Initial VFs: 32, Total VFs: 32, Number of VFs: 0, Function Dependency Link: 00
VF offset: 16, stride: 1, Device ID: 37cd
Supported Page Size: 00000553, System Page Size: 00000001
Region 0: Memory at 00000000c0000000 (64-bit, prefetchable)
Region 3: Memory at 00000000c1020000 (64-bit, prefetchable)
VF Migration: offset: 00000000, BIR: 0
Tracked-On: #4443
Signed-off-by: Vijay Dhanraj <vijay.dhanraj@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
This patches removes the unused CLOS_required flag from the
offline guest configuration tool.
Tracked-On: #3715
Signed-off-by: Vijay Dhanraj <vijay.dhanraj@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
This patch updates existing <$BOARD$>.xml for RDT support.
If the platform supports RDT, the resource and MAX CLOS
value is generated, else the CLOS_INFO is set to empty.
Tracked-On: #3715
Signed-off-by: Vijay Dhanraj <vijay.dhanraj@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
This patch checks if RDT feature is supported by platform and
updates the CONFIG_RDT_ENABLED flag in the <$BOARD$>.config
file accordingly.
Tracked-On: #3715
Signed-off-by: Vijay Dhanraj <vijay.dhanraj@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
This patch adds support for as generating board.c file
with multiple RDT resources.
Tracked-On: #3715
Signed-off-by: Vijay Dhanraj <vijay.dhanraj@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
and vm configuration
This patch adds support for,
1. Providing list of max supported CLOS value that is common
between all RDT resource to user when configuring scenario xml.
2. Validate and set the clos value in the vm_configuration file.
Tracked-On: #3715
Signed-off-by: Vijay Dhanraj <vijay.dhanraj@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
value among RDT resources.
This patch identifies the least common supported clos value
from multiple RDT resource. This is done so as to have
consistent capabilities across all resource allocations.
From SDM, "The number of CLOS supported for the MBA feature
may or may not align with other resources such as L3 CAT. In
cases where the RDT features support different numbers of
CLOS the lowest numerical CLOS support the common set of
features, while higher CLOS may support a subset. For instance,
if L3 CAT supports 8 CLOS while MBA supports 4 CLOS, all 8 CLOS
would have L3 CAT masks available for cache control, but the
upper 4 CLOS would not offer MBA support. In this case the upper
4 CLOS would not be subject to any throttling control. Software
can manage supported resources / CLOS in order to either have
1) consistent capabilities across CLOS by using the common subset
or 2) enable more flexibility by selectively applying resource
control where needed based on careful CLOS and thread mapping".
We decided to go with option #1, as it will be more consistent
and less prone to user errorw hen programming the resource mask
MSRs.
Tracked-On: #3715
Signed-off-by: Vijay Dhanraj <vijay.dhanraj@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
xml file
This patch adds support for parsing RDT resources and
its max clos, max supported mask values from the target xml file.
Tracked-On: #3715
Signed-off-by: Vijay Dhanraj <vijay.dhanraj@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
This patch adds support for storing multiple RDT resource
and its max supported clos value in the target xml file under
clos subsection.
Tracked-On: #3715
Signed-off-by: Vijay Dhanraj <vijay.dhanraj@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
If the guest is RTVM, dm process exit doesn't mean RTVM is
shutdown. Only shutdown_vm in hypervisor guarantee RTVM is
shutodwn. So we should avoid touch guest memory content
from DM if the guest is RTVM.
Tracked-On: #4428
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
Since this callback is only useful for pass through PCIe device and now pass through
PCIe device emulation has splited from DM to HV. we could remove this callback now.
Tracked-On: #4371
Signed-off-by: Li Fei1 <fei1.li@intel.com>
