Statically define the per vm RSDP/XSDT/MADT ACPI template tables in vacpi.c,
RSDP/XSDT tables are copied to guest physical memory after checksum is
calculated. For MADT table, first fix up process id/lapic id in its lapic
subtable, then the MADT table's checksum is calculated before it is copies to
guest physical memory.
Add 8-bit checksum function in util.h
Tracked-On: #3601
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
EPT tables are shared by MMU and IOMMU.
Some IOMMUs don't support page-walk coherency, the cpu cache of EPT entires
should be flushed to memory after modifications, so that the modifications
are visible to the IOMMUs.
This patch adds a new interface to flush the cache of modified EPT entires.
There are different implementations for EPT/PPT entries:
- For PPT, there is no need to flush the cpu cache after update.
- For EPT, need to call iommu_flush_cache to make the modifications visible
to IOMMUs.
Tracked-On: #3607
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Reviewed-by: Anthony Xu <anthony.xu@intel.com>
-- move 'RFLAGS_AC' to cpu.h
-- move 'VMX_SUPPORT_UNRESTRICTED_GUEST' to msr.h
and rename it to 'MSR_IA32_MISC_UNRESTRICTED_GUEST'
-- move 'get_vcpu_mode' to vcpu.h
-- remove deadcode 'vmx_eoi_exit()'
Tracked-On: #1842
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
move some data structures and APIs related host reset
from vm_reset.c to pm.c, these are not related with guest.
Tracked-On: #1842
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Now, we use native gdt saved in boot context for guest and assume
it could be put to same address of guest. But it may not be true
after the pre-launched VM is introduced. The gdt for guest could
be overwritten by guest images.
This patch make 32bit protect mode boot not use saved boot context.
Insteadly, we use predefined vcpu_regs value for protect guest to
initialize the guest bsp registers and copy pre-defined gdt table
to a safe place of guest memory to avoid gdt table overwritten by
guest images.
Tracked-On: #3532
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Currently, 'flags' is defined and set but never be used
in the flow of handling i/o request after then.
Tracked-On: #861
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
In the definition of port i/o handler, struct acrn_vm * pointer
is redundant as input, as context of acrn_vm is aleady linked
in struct acrn_vcpu * by vcpu->vm, 'vm' is not required as input.
this patch removes argument '*vm' from 'io_read_fn_t' &
'io_write_fn_t', use '*vcpu' for them instead.
Tracked-On: #861
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Check whether the address area pointed by the guest
cr3 is valid or not before loading pdptrs. Inject #GP(0)
to guest if there are any invalid cases.
Tracked-On: #3572
Signed-off-by: Jie Deng <jie.deng@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
fix violations touched below:
1.Cast operation on a constant value
2.signed/unsigned implicity conversion
3.return value unused.
V1->V2:
1.bitmap api will return boolean type, not need to check "!= 0", deleted.
2.The behaves ~(uint32_t)X and (uint32_t)~X are not defined in ACRN hypervisor Coding Guidelines,
removed the change of it.
Tracked-On: #861
Signed-off-by: Huihuang Shi <huihuang.shi@intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
This patch moves vmx_rdmsr_pat/vmx_wrmsr_pat from vmcs.c to vmsr.c,
so that these two functions would become internal functions inside
vmsr.c.
This approach improves the modularity.
v1 -> v2:
* remove 'vmx_rdmsr_pat'
* rename 'vmx_wrmsr_pat' with 'write_pat_msr'
Tracked-On: #1842
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Add emulated PCI device configure for SOS to prepare for add support for customizing
special pci operations for each emulated PCI device.
Tracked-On: #3475
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Create an iommu domain for all guest in vpci_init no matter if there's a PTDev
in it.
Tracked-On: #3475
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
Reviewed-by: Dongsheng Zhang <dongsheng.x.zhang@intel.com>
Align SOS pci device configure with pre-launched VM and filter pre-launched VM's
PCI PT device from SOS pci device configure.
Tracked-On: #3475
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
For non-trusty hypercalls, HV should inject #GP(0) to vCPU if they are
from non-ring0 or inject #UD if they are from ring0 of non-SOS. Also
we should not modify RAX of vCPU for these invalid vmcalls.
Tracked-On: #3497
Signed-off-by: Victor Sun <victor.sun@intel.com>
In some case, guest need to get more information under virtual environment,
like guest capabilities. Basically this could be done by hypercalls, but
hypercalls are designed for trusted VM/SOS VM, We need a machenism to report
these information for normal VMs. In this patch, vCPUID leaf 0x40000001 will
be used to satisfy this needs that report some extended information for guest
by CPUID.
Tracked-On: #3498
Signed-off-by: Victor Sun <victor.sun@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The policy of vART is that software in native can run in
VM too. And in native side, the relationship between the
ART hardware and TSC is:
pTSC = (pART * M) / N + pAdjust
The vART solution is:
- Present the ART capability to guest through CPUID leaf
15H for M/N which identical to the physical values.
- PT devices see the pART (vART = pART).
- Guest expect: vTSC = vART * M / N + vAdjust.
- VMCS.OFFSET = vTSC - pTSC = vAdjust - pAdjust.
So to support vART, we should do the following:
1. if vAdjust and vTSC are changed by guest, we should change
VMCS.OFFSET accordingly.
2. Make the assumption that the pAjust is never touched by ACRN.
For #1, commit "a958fea hv: emulate IA32_TSC_ADJUST MSR" has implementation
it. And for #2, acrn never touch pAdjust.
--
v2 -> v3:
- Add comment when handle guest TSC_ADJUST and TSC accessing.
- Initialize the VMCS.OFFSET = vAdjust - pAdjust.
v1 -> v2
Refine commit message to describe the whole vART solution.
Tracked-On: #3501
Signed-off-by: Kaige Fu <kaige.fu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
After "commit f0e1c5e init vcpu host stack when reset vcpu", SOS resume form S3
wants to schedule to vcpu_thread not the point where SOS enter S3. So we should
schedule to idel first then reschedule to execute vcpu_thread.
Tracked-On: #3387
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
PMC is hidden from guest and hypervisor should
inject UD to guest when 'rdpmc' vmexit.
Tracked-On: #3453
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Per SDM, writing 0 to MSR_IA32_MCG_STATUS is allowed, HV should not
return -EACCES on this case;
Tracked-On: #3454
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
'invept' is not expected in guest and hypervisor should
inject UD when 'invept' VM exit happens.
Tracked-On: #3444
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Otherwise, the previous local variables in host stack is not reset.
Tracked-On: #3387
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
softirq shouldn't be bounded to vcpu thread. One issue for this
is shell (based on timer) can't work if we don't start any guest.
This change also is trying best to make softirq handler running
with irq enabled.
Also update the irq disable/enabel in vmexit handler to align
with the usage in vcpu_thread.
Tracked-On: #3387
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Because we depend on guest OS to switch x2apic mode to enable lapic pass-thru, vlapic is working at the early stage of booting, eg: in virtual boot loader.
After lapic pass-thru enabled, no interrupt should be injected via vlapic any more.
This commit resets the vlapic to clear the pending status and adds ptapic_ops to enforce that no more interrupt accepted/injected via vlapic.
Tracked-On: #3227
Signed-off-by: Yan, Like <like.yan@intel.com>
This commit adds ops to vlapic structure, and add an *ops parameter to vlapic_reset().
At vlapic reset, the ops is set to the global apicv_ops, and may be assigned
to other ops later.
Tracked-On: #3227
Signed-off-by: Yan, Like <like.yan@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
vCPU schedule state change is under schedule lock protection. So there's no need
to be atomic.
Tracked-On: #1842
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
For pre-launched VMs and SOS, vCPUs are created on BSP one by one; For post-launched VMs,
vCPUs are created under vmm_hypercall_lock protection. So vcpu_create is called sequentially.
Operation in vcpu_create don't need to be atomic.
Tracked-On: #1842
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
For per-vCPU, EOI exit bitmap is a global parameter which should set or clear
atomically since there's no lock to protect this critical variable.
Tracked-On: #1842
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
Now sched_object and sched_context are protected by scheduler_lock. There's no
chance to use runqueue_lock to protect schedule runqueue if we have no plan to
support schedule migration.
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
'pcpu_id' should be less than CONFIG_MAX_PCPU_NUM,
else 'per_cpu_data' will overflow. This commit fixes
this potential overflow issue.
Tracked-On: #3397
Signed-off-by: Tianhua Sun <tianhuax.s.sun@intel.com>
Reviewed-by: Yonghua Huang <yonghua.huang@intel.com>
ACRN Coding guidelines requires two different types pointer can't
convert to each other, except void *.
Tracked-On: #861
Signed-off-by: Huihuang Shi <huihuang.shi@intel.com>
ACRN Coding guidelines requires type conversion shall be explicity.
Tracked-On: #861
Signed-off-by: Huihuang Shi <huihuang.shi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
In almost case, vLAPIC will only be accessed by the related vCPU. There's no
synchronization issue in this case. However, other vCPUs could deliver interrupts
to the current vCPU, in this case, the IRR (for APICv base situation) or PIR
(for APICv advanced situation) and TMR for both cases could be accessed by more
than one vCPUS simultaneously. So operations on IRR or PIR should be atomical
and visible to other vCPUs immediately. In another case, vLAPIC could be accessed
by another vCPU when create vCPU or reset vCPU which could be supposed to be
consequently.
Tracked-On: #1842
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
cancel_event_injection is not need any more if we do 'scheudle' prior to
acrn_handle_pending_request. Commit "921288a6672: hv: fix interrupt
lost when do acrn_handle_pending_request twice" bring 'schedule'
forward, so remove cancel_event_injection related stuff.
Tracked-On: #3374
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
ACRN Coding guidelines requires no dead code.
Tracked-On: #861
Signed-off-by: Huihuang Shi <huihuang.shi@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
Reviewed-by: Li, Fei1 <fei1.li@intel.com>
Microarchitectural Data Sampling (MDS) is a hardware vulnerability
which allows unprivileged speculative access to data which is available
in various CPU internal buffers.
1. Mitigation on ACRN:
1) Microcode update is required.
2) Clear CPU internal buffers (store buffer, load buffer and
load port) if current CPU is affected by MDS, when VM entry
to avoid any information leakage to guest thru above buffers.
3) Mitigation is not needed if ARCH_CAP_MDS_NO bit (bit5)
is set in IA32_ARCH_CAPABILITIES MSR (10AH), in this case,
current processor is no affected by MDS vulnerability, in other
cases mitigation for MDS is required.
2. Methods to clear CPU buffers (microcode update is required):
1) L1D cache flush
2) VERW instruction
Either of above operations will trigger clearing all
CPU internal buffers if this CPU is affected by MDS.
Above mechnism is enumerated by:
CPUID.(EAX=7H, ECX=0):EDX[MD_CLEAR=10].
3. Mitigation details on ACRN:
if (processor is affected by MDS)
if (processor is not affected by L1TF OR
L1D flush is not launched on VM Entry)
execute VERW instruction when VM entry.
endif
endif
4. Referrence:
Deep Dive: Intel Analysis of Microarchitectural Data Sampling
https://software.intel.com/security-software-guidance/insights/
deep-dive-intel-analysis-microarchitectural-data-sampling
Deep Dive: CPUID Enumeration and Architectural MSRs
https://software.intel.com/security-software-guidance/insights/
deep-dive-cpuid-enumeration-and-architectural-msrs
Tracked-On: #3317
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Reviewed-by: Anthony Xu <anthony.xu@intel.com>
Reviewed-by: Jason CJ Chen <jason.cj.chen@intel.com>
1. reset polarity of ptirq_remapping_info to zero.
this help to set correct initial pin state, and fix the interrupt lost issue
when assign a ptirq to uos.
2. since vioapic_generate_intr relys on rte, we should build rte before
generating an interrput, this fix the redundant interrupt.
Tracked-On: #3362
Signed-off-by: Cai Yulong <yulongc@hwtc.com.cn>
According to SDM, xsetbv writes the contents of registers EDX:EAX into the 64-bit
extended control register (XCR) specified in the ECX register. (On processors
that support the Intel 64 architecture, the high-order 32 bits of RCX are ignored.)
In current code, RCX is checked, should ingore the high-order 32bits.
Tracked-On: #3360
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Reviewed-by: Yonghua Huang <yonghua.huang@intel.com>
The current implement will trigger shutdown vm request on the BSP VCPU on the VM,
not the VCPU will trap out because triple fault. However, if the BSP VCPU on the VM
is handling another IO emulation, it may overwrite the triple fault IO request on
the vhm_request_buffer in function acrn_insert_request. The atomic operation of
get_vhm_req_state can't guarantee the vhm_request_buffer will not access by another
IO request if it is not running on the corresponding VCPU. So it should trigger
triple fault shutdown VM IO request on the VCPU which trap out because of triple
fault exception.
Besides, rt_vm_pm1a_io_write will do the right thing which we shouldn't do it in
triple_fault_shutdown_vm.
Tracked-On: #1842
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
According to SDM, bit N (physical address width) to bit 63 should be masked when calculate
host page frame number.
Currently, hypervisor doesn't set any of these bits, so gpa2hpa can work as expectd.
However, any of these bit set, gpa2hpa return wrong value.
Hypervisor never sets bit N to bit 51 (reserved bits), for simplicity, just mask bit 52 to bit 63.
Tracked-On: #3352
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
ACRN coding guideline requires function shall have only one return entry.
Fix it.
Tracked-On: #861
Signed-off-by: Huihuang Shi <huihuang.shi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
vcpu is never scan because of scan tool will be crashed!
After modulization, the vcpu can be scaned by the scan tool.
Clean up the violations in vcpu.c.
Fix the violations:
1.No brackets to then/else.
2.Function return value not checked.
3.Signed/unsigned coversion without cast.
V1->V2:
change the type of "vcpu->arch.irq_window_enabled" to bool.
V2->V3:
add "void *" prefix on the 1st parameter of memset.
Tracked-On: #861
Signed-off-by: Huihuang Shi <huihuang.shi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The sbuf is allocated for each pcpu by hypercall from SOS. Before launch
Guest OS, the script will offline cpus, which will trigger vcpu reset and
then reset sbuf pointer. But sbuf only initiate once by SOS, so these
cpus for Guest OS has no sbuf to use. Thus, when run 'acrntrace' on SOS,
there is no trace data for Guest OS.
To fix the issue, only reset the sbuf for SOS.
Tracked-On: #3335
Signed-off-by: Conghui Chen <conghui.chen@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
Reviewed-by: Yan, Like <like.yan@intel.com>
The current implement will cache each ISR vector in ISR vector stack and do
ISR vector stack check when updating PPR. However, there is no need to do this
because:
1) We will not touch vlapic->isrvec_stk[0] except doing vlapic_reset:
So we don't need to do vlapic->isrvec_stk[0] check.
2) We only deliver higher priority interrupt from IRR to ISR:
So we don't need to check whether vlapic->isrvec_stk interrupts is always increasing.
3) There're only 15 different priority interrupt, It will not happened that more that
15 interrupts could been delivered to ISR:
So we don't need to check whether vlapic->isrvec_stk_top will larger than
ISRVEC_STK_SIZE which is 16.
This patch try to remove ISR vector stack and use isrv to cache the vector number for
the highest priority bit that is set in the ISR.
Tracked-On: #1842
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Fix the violations not touched the logical.
1.Function return value not checked.
2.Logical conjuctions need brackets.
3.No brackets to then/else.
4.Type conversion without cast.
Tracked-On: #861
Signed-off-by: Huihuang Shi <huihuang.shi@intel.com>
MISRA-C requires inline functions should be declared static,
these APIs are external interfaces,remove inline
Tracked-On: #861
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
modified: arch/x86/guest/vcpu.c
MISRA-C standard requires the type of result of expression in if/while pattern shall be boolean.
Tracked-On: #861
Signed-off-by: Huihuang Shi <huihuang.shi@intel.com>
There are a lot of works to do between create_vm (HV will mark vm's state
as VM_CREATED at this stage) and vm_run (HV will mark vm's state as VM_STARTED),
like building mptable/acpi table, initializing mevent and vdevs. If there is
something goes wrong between create_vm and vm_run, the devicemodel will jumps
to the deinit process and will try to destroy the vm. For example, if the
vm_init_vdevs failed, the devicemodel will jumps to dev_fail and then destroy
the vm.
For normal vm in above situation, it is fine to destroy vm. And we can create and
start it next time. But for RTVM, we can't destroy the vm as the vm's state is
VM_CREATED. And we can only destroy vm when its state is VM_POWERING_OFF. So, the
vm will stay at VM_CREATED state and we will never have chance to destroy it.
Consequently, we can't create and start the vm next time.
This patch fixes it by allowing to pause and then destroy RTVM when its state is VM_CREATED.
Tracked-On: #3069
Acked-by: Eddie Dong <eddie.dong@intel.com>
Signed-off-by: Kaige Fu <kaige.fu@intel.com>
wbinvd is used to write back all modified cache lines in the processor's
internal cache to main memory and invalidates(flushes) the internal caches.
Using clflushopt instructions to emulate wbinvd to flush each
guest vm memory, if CLFLUSHOPT is not supported, boot will fail.
Signed-off-by: Jack Ren <jack.ren@intel.com>
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Reviewed-by: Li, Fei1 <fei1.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The has_rt_vm walk through all VMs to check RT VM flag and if
there is no any RT VM, then return false otherwise return true.
Signed-off-by: Jack Ren <jack.ren@intel.com>
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Reviewed-by: Li, Fei1 <fei1.li@intel.com>
The ept_flush_leaf_page API is used to flush address space
from a ept page entry, user can use it to match walk_ept_mr to
flush VM address space.
Signed-off-by: Jack Ren <jack.ren@intel.com>
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Reviewed-by: Li, Fei1 <fei1.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The walk_ept_table API is used to walk through EPT table for getting
all of present pages, user can get each page entry and its size
from the walk_ept_table callback.
The get_ept_entry is used to getting EPT pointer of the vm, if current
context of mv is secure world, return secure world EPT pointer, otherwise
return normal world EPT pointer.
Signed-off-by: Jack Ren <jack.ren@intel.com>
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Reviewed-by: Li, Fei1 <fei1.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The current implement doesn't clear which access type we support for
APIC-Access VM Exit:
1) linear access for an instruction fetch
-- APIC-access page is mapped as UC which doesn't support fetch
2) linear access (read or write) during event delivery
-- Which is not happened in normal case except the guest went wrong, such as,
set the IDT table in APIC-access page. In this case, we don't need to support.
3) guest-physical access during event delivery;
guest-physical access for an instruction fetch or during instruction execution
-- Do we plan to support enable APIC in real mode ? I don't think so.
Tracked-On: #1842
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
This patch introduces check_vm_vlapic_state API instead of is_lapic_pt_enabled
to check if all the vCPUs of a VM are using x2APIC mode and LAPIC
pass-through is enabled on all of them.
When the VM is in VM_VLAPIC_TRANSITION or VM_VLAPIC_DISABLED state,
following conditions apply.
1) For pass-thru MSI interrupts, interrupt source is not programmed.
2) For DM emulated device MSI interrupts, interrupt is not delivered.
3) For IPIs, it will work only if the sender and destination are both in x2APIC mode.
Tracked-On: #3253
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This patch introduces vLAPIC state for a VM. The VM vLAPIC state can
be one of the following
* VM_VLAPIC_X2APIC - All the vCPUs/vLAPICs (Except for those in Disabled mode) of this
VM use x2APIC mode
* VM_VLAPIC_XAPIC - All the vCPUs/vLAPICs (Except for those in Disabled mode) of this
VM use xAPIC mode
* VM_VLAPIC_DISABLED - All the vCPUs/vLAPICs of this VM are in Disabled mode
* VM_VLAPIC_TRANSITION - Some of the vCPUs/vLAPICs of this VM (Except for those in Disabled mode)
are in xAPIC and the others in x2APIC
Upon a vCPU updating the IA32_APIC_BASE MSR to switch LAPIC mode, this
API is called to sync the vLAPIC state of the VM. Upon VM creation and reset,
vLAPIC state is set to VM_VLAPIC_XAPIC, as ACRN starts the vCPUs vLAPIC in
XAPIC mode.
Tracked-On: #3253
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
is_xapic_enabled API returns true if vLAPIC is in xAPIC mode. In
all other cases, it returns false.
Tracked-On: #3253
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Remove static and inline attributes to the API is_x2apic_enabled
and declare a prototype in vlapic.h. Also fix the check performed on guest
APICBASE_MSR value to query vLAPIC mode.
Tracked-On: #3253
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This patch changes the code in vlapic_set_apicbase for the following reasons
1) Better readability as it first checks if the new value programmed into
MSR is any different from the existing value cached in guest structures
2) Check if both bits 11:10 are set before enabling x2APIC mode for guest.
Current code does not check if Bit 11 is set.
3) Add TODO in the comments, to detail about the current gaps in
IA32_APIC_BASE MSR emulation.
Tracked-On: #3253
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
V1:Initial Patch
Modularize vpic. The current patch reduces the usage
of acrn_vm inside the vpic.c file.
Due to the global natire of register_pio_handler, where
acrn_vm is being passed, some usage remains.
These needs to be a separate "interface" file.
That will come in smaller newer patch provided
this patch is accepted.
V2:
Incorporated comments from Jason.
V3:
Fixed some MISRA-C Violations.
Tracked-On: #1842
Signed-off-by: Arindam Roy <arindam.roy@intel.com>
Reviewed-by: Xu, Anthony <anthony.xu@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
This commit extract pm io handler registration code to register_pm_io_handler()
to reduce the cyclomatic complexity of create_vm() in order to be complied with
MISRA-C rules.
Tracked-On: #3227
Signed-off-by: Yan, Like <like.yan@intel.com>
When the lapic is passthru, vpic and vioapic cannot be used anymore. In
current code, user can still inject vpic interrupt to Guest OS, this is
not allowed.
This patch remove the vpic and vioapic initiate functions during
creating VM with lapic passthru. But the APIs in vpic and vioapic are
called in many places, for these APIs, follow the below principles:
1. For the APIs which will access uninitiated variables, and may case
hypervisor hang, add @pre to make sure user should call them after vpic or
vioapic is initiated.
2. For the APIs which only return some static value, do noting with them.
3. For the APIs which user will called to inject interrupt, such as
vioapic_set_irqline_lock or vpic_set_irqline, add condition in these
APIs to make sure it only inject interrupt when vpic or vioapic is
initiated. This change is to make sure the vuart or hypercall need not
to care whether lapic is passthru or the vpic and vioapic is initiated
or not.
Tracked-On: #3227
Signed-off-by: Conghui Chen <conghui.chen@intel.com>
On SDC scenario, SOS VM id is fixed to 0 so some hypercalls from guest
are using hardcoded "0" to represent SOS VM, this would bring issues
for HYBRID scenario which SOS VM id is non-zero.
Now introducing a new VM id concept for DM/VHM hypercall APIs, that
return a relative VM id which is from SOS view when create VM for post-
launched VMs. DM/VHM could always treat their own vm id is "0". When they
make hypercalls, hypervisor will convert the VM id to the absolute id
when dispatch the hypercalls.
Tracked-On: #3214
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@Intel.com>
Changes:
- In current design, the hypercall is only allowed calling from SOS or
trusty VM, so separate the trusty hypercalls from dispatch_hypercall().
The vm parameter which referenced by hcall_xxx() should be SOS VM;
- do not inject #UD for hypercalls from non-SOS, just return -ENODEV;
Tracked-On: #3214
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@Intel.com>
According to SDM vol1 13.3:
Write 1 to reserved bit of XCR0 will trigger GP.
This patch make ACRN behavior align with SDM definition.
Tracked-On: #3239
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This patch fix potential null pointer dereference
1, will access null pointer if 'context' is null.
2, if entry already been added to the VM when add
intx entry for this vm, but parameter virt_pin
is not equal to entry->virt_sid.intx_id.pin. So
will saves this entry address to
vpin_to_pt_entry[entry->virt_sid.intx_id.pin] and
vpin_to_pt_entry[virt_pin]. In this case, this entry
will be freed twice.
Tracked-On: #3217
Signed-off-by: Tianhua Sun <tianhuax.s.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Currently vlapic id of SOS VM is virtualized, it is indexed by vcpuid in
physical APIC id sequence, but CPUID 0BH leaf still report physical
APIC ID. In SDC/INDUSTRY scenario they are identical mapping so no issue
occured. In hybrid mode this would be a problem because vAPIC ID might
be different with pAPIC ID. We need to make the APIC ID which returned from
CPUID consistent with the one returned from LAPIC register.
Tracked-On: #3214
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The vcpu num could be calculated based on pcpu_bitmap when prepare_vcpu()
is done, so remove this redundant configuration item;
Tracked-On: #3214
Signed-off-by: Victor Sun <victor.sun@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
vm_apicid2vcpu_id() might return invalid vcpu id, when this happens
we should return -1 in vlapic_x2apic_pt_icr_access();
Tracked-On: #3214
Signed-off-by: Victor Sun <victor.sun@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
The print message of source and target vcpu id is incorrect, fix it.
Tracked-On: #3214
Signed-off-by: Victor Sun <victor.sun@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Previously multiboot mods[0] is designed for kernel module for all
pre-launched VMs including SOS VM, and mods[0].mm_string is used
to store kernel cmdline. This design could not satisfy the requirement
of hybrid mode scenarios that each VM might use their own kernel image
also ramdisk image. To resolve this problem, we will use a tag in
mods mm_string field to specify the module type. If the tag could
be matched with os_config of VM configurations, the corresponding
module would be loaded;
Tracked-On: #3214
Signed-off-by: Victor Sun <victor.sun@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Add vuart_deinit to vm shutdown so that the vuart resource can be
reset, and when the Guest VM restart, it could have right state.
Tracked-On: #2987
Signed-off-by: Conghui Chen <conghui.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
According to Chap 23.8 RESTRICTIONS ON VMX OPERATION, Vol 3, SDM:
"Any attempt to set one of these bits to an unsupported value while in VMX
operation (including VMX root operation) using any of the CLTS, LMSW, or
MOV CR instructions causes a general-protection exception."
So we don't need to trap them out then inject the GP in hypervisor.
Tracked-On: #2561
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
FuSa requires setting CR4.SMAP/SMEP/PKE will invalidate the TLB. However,
setting CR4.SMAP will invalidate the TLB on native while not in non-root mode.
To make sure this, we will trap CR4.SMAP/SMEP/PKE setting to invalidate the TLB
in root mode.
Tracked-On: #2561
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Since the vapic_id is from VM, need to check for pre-condition before passing
vcpu_id to vcpu_from_vid. This is in the path of LAPIC passthrough ICR
access
Tracked-On: #3170
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Present SGX related MSRs to guest if SGX is supported.
- MSR_IA32_SGXLEPUBKEYHASH0 ~ MSR_IA32_SGXLEPUBKEYHASH3:
SGX Launch Control is not supported, so these MSRs are read only.
- MSR_IA32_SGX_SVN_STATUS:
read only
- MSR_IA32_FEATURE_CONTROL:
If SGX is support in VM, opt-in SGX in this MSR.
- MSR_SGXOWNEREPOCH0 ~ MSR_SGXOWNEREPOCH1:
The two MSRs' scope is package level, not allow guest to change them.
Still leave them in unsupported_msrs array.
Tracked-On: #3179
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
If sgx is supported in guest, present SGX capabilities to guest.
There will be only one EPC section presented to guest, even if EPC
memory for a guest is from muiltiple physcial EPC sections.
Tracked-On: #3179
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Reviewed-by: Yan, Like <like.yan@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Build EPT entries for SGX EPC resource for VMs.
- SOS: EPC resrouce will be removed from EPT of SOS, don't support SGX virtualization for SOS.
- Non-SOS: build ept mapping for EPC resource for guest.
Guest base address and size is specified in vm configuration.
Tracked-On: #3179
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
When we call reset_vm() function to reset vm, the vm state
should be reset to VM_CREATED as well.
Tracked-On: #3182
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
In current code, vpci do the pci enumartion and add pci devices to the
context table of iommu.
Need to enable iommu DMA address translation later than vpci init.
Otherwise, in UEFI platform, there will be a shot time that address translation
is enabled, but the context table is not setup.
For the devices active in UEFI environment will have problem on address translation.
Tracked-On: #3160
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
At the time the guest is switching to X2APIC mode, different VCPUs in the
same VM could expect the setting of the per VM msr_bitmap differently,
which could cause problems.
Considering different approaches to address this issue:
1) only guest BSP can update msr_bitmap when switching to X2APIC.
2) carefully re-write the update_msr_bitmap_x2apic_xxx() functions to
make sure any bit in the bitmap won't be toggled by the VCPUs.
3) make msr_bitmap as per VCPU.
We chose option 3) because it's simple and clean, though it takes more
memory than other options.
BTW, need to remove const modifier from update_msr_bitmap_x2apic_xxx()
functions to get it compiled.
Tracked-On: #3166
Signed-off-by: Zide Chen <zide.chen@intel.com>
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
The previous function just check the pstate target value in PERF_CTL msr
by indexing px data control value which comes from ACPI table, this would
bring a bug in the case that guest is running intel_pstate_driver:
the turbo pstate target value from intel_pstate driver is in a range
instead of fixed value in ACPI _PSS table, thus the turbo px request would
be rejected. This patch fixed this issue.
Tracked-On: #3158
Signed-off-by: Victor Sun <victor.sun@intel.com>
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
filter out prelaunched vm memory from e820 table
and unmap prelaunched vm memory from ept table
before boot service OS
Tracked-On: #3148
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
- add the GUEST_FLAG_HIGHEST_SEVERITY flag to indicate that the guest has
privilege to reboot the host system.
- this flag is statically assigned to guest(s) in vm_configurations.c in
different scenarios.
- implement reset_host() function to reset the host. First try the ACPI
reset register if available, then try the 0xcf9 PIO.
Tracked-On: #3145
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Signed-off-by: Zide Chen <zide.chen@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
ACRN supports LAPIC emulation for guests using x86 APICv. When guest OS/BIOS
switches from xAPIC to x2APIC mode of operation, ACRN also supports switching
froom LAPIC emulation to LAPIC passthrough to guest. User/developer needs to
configure GUEST_FLAG_LAPIC_PASSTHROUGH for guest_flags in the corresponding
VM's config for ACRN to enable LAPIC passthrough.
This patch does the following
1)Fixes a bug in the abovementioned feature. For a guest that is
configured with GUEST_FLAG_LAPIC_PASSTHROUGH, during the time period guest is
using xAPIC mode of LAPIC, virtual interrupts are not delivered. This can be
manifested as guest hang when it does not receive virtual timer interrupts.
2)ACRN exposes physical topology via CPUID leaf 0xb to LAPIC PT VMs. This patch
removes that condition and exposes virtual topology via CPUID leaf 0xb.
Tracked-On: #3136
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
the pcpu just write its own vmcs, not need spinlock.
and the arch.lock not used other places, remove it too.
Tracked-On: #3130
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
now only SOS need decide boot with de-privilege or direct boot mode, while
for other pre-launched VMs, they should use direct boot mode.
this patch merge boot/guest/direct_boot_info.c &
boot/guest/deprivilege_boot_info.c into boot/guest/vboot_info.c,
and change init_direct_vboot_info() function name to init_general_vm_boot_info().
in init_vm_boot_info(), depend on get_sos_boot_mode(), SOS may choose to init
vm boot info by setting the vm_sw_loader to deprivilege specific one; for SOS
using DIRECT_BOOT_MODE and all other VMS, they will use general_sw_loader as
vm_sw_loader and go through init_general_vm_boot_info() for virtual boot vm
info filling.
this patch also move spurious handler initilization for de-privilege mode from
boot/guest/deprivilege_boot.c to boot/guest/vboot_info.c, and just set it in
deprivilege sw_loader before irq enabling.
Changes to be committed:
modified: Makefile
modified: arch/x86/guest/vm.c
modified: boot/guest/deprivilege_boot.c
deleted: boot/guest/deprivilege_boot_info.c
modified: boot/guest/direct_boot.c
renamed: boot/guest/direct_boot_info.c -> boot/guest/vboot_info.c
modified: boot/guest/vboot_wrapper.c
modified: boot/include/guest/deprivilege_boot.h
modified: boot/include/guest/direct_boot.h
modified: boot/include/guest/vboot.h
new file: boot/include/guest/vboot_info.h
modified: common/vm_load.c
modified: include/arch/x86/guest/vm.h
Tracked-On: #1842
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Handle the PIO reset register that is defined in host ACPI:
Parse host FADT table to get the host reset register info, and emulate
it for Service OS:
- return all '1' for guest reads because the read behavior is not defined
in ACPI.
- ignore guest writes with the reset value to stop it from resetting host;
if guest writes other values, passthru it to hardware in case the reset
register supports other functionalities.
Tracked-On: #2700
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Signed-off-by: Zide Chen <zide.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This patch implements triple fault vmexit handler and base on VM types:
- post-launched VMs: shutdown_target_vm() injects S5 PIO write to request
DM to shut down the target VM.
- pre-launched VMs: shut down the guest.
- SOS: similarly, but shut down all the non real-time post-launched VMs that
depend to SOS before shutting down SOS.
Tracked-On: #2700
Signed-off-by: Zide Chen <zide.chen@intel.com>
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
- post-launched RTVM: intercept both PIO ports so that hypervisor has a
chance to set VM_POWERING_OFF flag.
- all other type of VMs: deny these 2 ports from guest access so that
guests are not able to reset host.
Tracked-On: #2700
Signed-off-by: Zide Chen <zide.chen@intel.com>
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
For pre-launched VMs and SOS, VM shutdown should not be executed in the
current VM context.
- implement NEED_SHUTDOWN_VM request so that the BSP of the target VM can shut
down the guest in idle thread.
- implement shutdown_vm_from_idle() to shut down target VM.
Tracked-On: #2700
Signed-off-by: Zide Chen <zide.chen@intel.com>
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
1) According SDM Vol 3, Chap 29.1.2, Any VM exit caused by TPR virtualization
is trap-like: the instruction causing TPR virtualization completes before the VM
exit occurs (for example, the value of CS:RIP saved in the guest-state area of
the VMCS references the next instruction). So we need to retain the RIP.
2) The previous implement only consides the situation the guest will reduce the
TPR. However, the guest will increase it. So we need to update the PPR before we
find a deliverable interrupt. For examples: a) if the guest increase the TPR before
a irq windows vmexit, we need to update the PPR when check whether there has a pending
delivery interrupt or not; b) if the guest increase the TPR, then an external irq raised,
we need to update the PPR when check whether there has a deliverable interrupt to inject
to guest.
Tracked-On: #1842
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Reviewed-by: Yu Wang <yu1.wang@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
For prelaunched VM, Service OS and postlaunched RT VM, we only need the vRTC
provides backed-up date, so we could use the simple vRTC which implemented
in hypervisor. For postlaunched VM (which is not a RT VM), we needs the device
module to emulate the vRTC for it.
Tracked-On: #1842
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Reviewed-by: Yu Wang <yu1.wang@intel.com>
There're some instructions which not support bit 0(w bit) flag but which
memory opcode size is fixed and the memory opcode size is not equal to the
register opcode size. In our code, there is movzx (which opcode is 0F B7)
which memory opcode size is fixed to 16 bits. So add a flag VIE_OP_F_WORD_OP
to indicate a instruction which memory opcode size is fixed to 16 bits.
Tracked-On: #1337
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
Add MSR_IA32_MISC_ENABLE to emulated_guest_msrs to enable the emulation.
Init MSR_IA32_MISC_ENABLE for guest.
Tracked-On: #2834
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
