Add 2 UUIDs for post-launched Standard VM.
Tracked-On: #4641
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Acked-by: Terry Zou <terry.zou@intel.com>
SCENARIO XML file has included RELEASE or DEBUG info already, so if RELEASE
is not specified in make command, Makefile should not override RELEASE info
in SCENARIO XML. If RELEASE is specified in make command, then RELEASE info
in SCENARIO XML could be overridden by make command.
The patch also fixed a issue that get correct board defconfig when build
hypervisor from TARGET_DIR;
Tracked-On: #4688
Signed-off-by: Victor Sun <victor.sun@intel.com>
Add SOS_IDLE for SOS cmdline so that "idle=halt" paramter will be needed
only when CPU sharing is enabled;
Tracked-On: #4329
Signed-off-by: Victor Sun <victor.sun@intel.com>
The parameter of "idle=halt" for SOS cmdline is only needed when cpu sharing
is enabled, otherwise it will impact SOS power.
Tracked-On: #4329
Signed-off-by: Victor Sun <victor.sun@intel.com>
Enhance and fix some typos in the text that gets printed out from the
board_parser.py script.
Tracked-On: #4630
Signed-off-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
Remove sdc2 scenario since the VM launch requirement under this scenario
will be satisfied by industry scenario.
Tracked-On: #4641
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Leave HV_RAM_SIZE/HV_RAM_START default to blank, and config tool would
generate for them, otherwise, they would be set by the UI.
Tracked-On: #4641
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Leave HV_RAM_SIZE/HV_RAM_START default to blank, and config tool would
generate for them, otherwise, they would be set by the UI.
Tracked-On: #4641
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
1. Set default value for HV template.
2. Refine vuartx in template vm setting xmls.
Tracked-On: #4641
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
1. modify epc_section to configurable="0".
2. add 'idle=halt' for sos bootargs to impove performance.
Tracked-On: #4641
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
UI got syntax warning while loading new logical partitons xml, add
missed '</clos>' for it.
Tracked-On: #4641
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Currently, '--out' is relative scripts run dir if it gets relative path,
Refine '--out' to source root tree if it gets relative path.
Tracked-On: #4641
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Terry Zou <terry.zou@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Add FADT table support to support guest S5 setting.
According to ACPI 6.3 Spec, OSPM must ignored the DSDT and FACS fields if them're zero.
However, Linux kernel seems not to abide by the protocol, it will check DSDT still.
So add an empty DSDT to meet it.
Tracked-On: #4623
Signed-off-by: Li Fei1 <fei1.li@intel.com>
1. add wall time info into disk log file, to make it easier to
sync with other log
2. improve the log path creating operation, call system to make
dir to avoid the first and second level path not existed.
Tracked-On: #4633
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
The sphinx-tabs extension let's us create a document that can
dynamically display alternate material based on clicking a tab, as used
in the Zephyr getting started guide:
https://docs.zephyrproject.org/latest/getting_started/index.html
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Pre-Launched VMs need the vbar_base values pre-populated
for pass-thru PCI devices.
This patch moves the pci parser logic from board_cfg_gen to library
so that scenario_cfg_gen scripts can use pci parser routines while
generating pci_dev file logical partition scenario.
Tracked-On: #4666
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Remove sdc2 scenario since the VM launch requirement under this scenario
could be satisfied by industry scenario now;
Tracked-On: #4661
Signed-off-by: Victor Sun <victor.sun@intel.com>
In industry scenario, hypervisor will support 1 post-launched RT VM
and 1 post-launched kata VM and up to 5 post-launched standard VMs;
Tracked-On: #4661
Signed-off-by: Victor Sun <victor.sun@intel.com>
The patch enables CPU sharing feature by default, the default scheduler is
set to SCHED_BVT;
Tracked-On: #4661
Signed-off-by: Victor Sun <victor.sun@intel.com>
gcc in latest clearlinux enabled the pointer-sign warning as
default. This breaks the acrn-crashlog build.
Make acrn-crashlog build issue fixed by convert to correct
pointer type.
Tracked-On: #4636
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
The current logic puts hpa2 above GPA 4G always, which is incorrect. Need
to set gpa start of hpa2 right after hpa1 when hpa1 size is less then 2G;
Tracked-On: #4458
Signed-off-by: Victor Sun <victor.sun@intel.com>
On most board the MCFG base is set to 0xe0000000, so modify this value in
platform_acpi_info.h for generic boards;
The description of ACPI_PARSE_ENABLED is modified also to match its usage.
Tracked-On: #4157
Signed-off-by: Victor Sun <victor.sun@intel.com>
The template xmls are used to be the dafault VM settings for dynamically
adding VMs.
Tracked-On: #4641
Signed-off-by: Shuang Zheng <shuang.zheng@intel.com>
Reviewed-by: Victor Sun <victor.sun@intel.com>
Acked-by: Terry Zou <terry.zou@intel.com>
config app implements interfaces to dynamically:
create new scenario settings based on tempaltes;
create new launch settings based on templates;
add or delete VMs for scenario settings;
add or delete VMs for launch settings;
load default scenario or launch settings
Tracked-On: #4641
Signed-off-by: Shuang Zheng <shuang.zheng@intel.com
Reviewed-by: Victor Sun <victor.sun@intel.com>
Acked-by: Terry Zou <terry.zou@intel.com>
To keep align hv source code changes, config tool doese below changes:
1. Remove UUID from scenario config files.
2. Remove severity from scenario config files.
3. Use vm type to instead load order type.
4. Use the mapped UUID data base for launch vm script configurations.
5. Unify the ui_entry_api for '--out'
Tracked-On: #4641
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Acked-by: Terry Zou <terry.zou@intel.com>
Use vm_type to instead combination of load_type/uuid/severity in config
xmls.
Tracked-On: #4641
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Acked-by: Terry Zou <terry.zou@intel.com>
As it doesn't depends on the scenario, there are sos/pre launched VMS
in config xmls, emulate vhostbridge for sos vm, specify the pass-thru
PCI device for pre launched vm.
Add support to parse pci_devs for pre launched vm.
Tracked-On: #4641
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Acked-by: Terry Zou <terry.zou@intel.com>
Add pass-thru PCI device for pre launched vm section in config xmls.
Tracked-On: #4641
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Acked-by: Terry Zou <terry.zou@intel.com>
For purpose weaken 'scenario' from config tool, remove 'scenario' dependency
from config tool.
Tracked-On: #4641
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Acked-by: Terry Zou <terry.zou@intel.com>
The SCENARIO xml file already includes all information of KCONFIG file,
use KCONFIG_FILE/SCENARIO_FILE parameter at same time would introduce
conflict so this case should be invalid.
Tracked-On: #4616
Signed-off-by: Victor Sun <victor.sun@intel.com>
CONFIG_MAX_KATA_VM_NUM is a scenario specific configuration, so it is better
to put the MACRO in scenario folder directly, to instead the Kconfig item in
Kconfig file which should work for all scenarios;
Tracked-On: #4616
Signed-off-by: Victor Sun <victor.sun@intel.com>
Basicly ACRN scenario is a configuration name for specific usage. By giving
scenario name ACRN will load corresponding VM configurations to build the
hypervisor. But customer might have their own scenario name, change the
scenario type from choice to string is friendly to them since Kconfig source
file change will not be needed.
With this change, CONFIG_$(SCENARIO) will not exist in kconfig file and will
be instead of CONFIG_SCENARIO, so the Makefile need to be changed accordingly;
Tracked-On: #4616
Signed-off-by: Victor Sun <victor.sun@intel.com>
The pci_dev config settings of SOS are same so move the config interface
from vm_configurations.c to CONFIG_SOS_VM macro;
Tracked-On: #4616
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Currently the vm uuid and severity is initilized separately in
vm_config struct, developer need to take care both items carefuly
otherwise hypervisor would have trouble with the configurations.
Given the vm loader_order/uuid and severity are binded tightly, the
patch merged these tree settings in one macro so that developer will
have a simple interface to configure in vm_config struct.
Tracked-On: #4616
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
If CPU has MSR_TEST_CTL, show an emulaued one to VCPU
Tracked-On: #4496
Signed-off-by: Tao Yuhong <yuhong.tao@intel.com>
Reviewed-by: Yan, Like <like.yan@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
If CPU support rise #AC for Splitlock Access, then enable this
feature at each CPU.
Tracked-On: #4496
Signed-off-by: Tao Yuhong <yuhong.tao@intel.com>
Reviewed-by: Yan, Like <like.yan@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
When the destination of an atomic memory operation located in 2
cache lines, it is called a Splitlock Access. LOCK# bus signal is
asserted for splitlock access which may lead to long latency. #AC
for Splitlock Access is a CPU feature, it allows rise alignment
check exception #AC(0) instead of asserting LOCK#, that is helpful
to detect Splitlock Access.
This feature is enumerated by MSR(0xcf) IA32_CORE_CAPABILITIES[bit5]
Add helper function:
bool has_core_cap(uint32_t bitmask)
Tracked-On: #4496
Signed-off-by: Tao Yuhong <yuhong.tao@intel.com>
Reviewed-by: Yan, Like <like.yan@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Update the doc writing guidelines to include some new capabilities
(multi-column display, numbered instruction steps) and add more
information about writing tables.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
now VM state transition only allows VM_PAUSED to
VM_POWERED_OFF, this patch call vm_pause before vm_destroy
in some vm failure cases.
Tracked-On: #4320
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
1) fix a bug,resend shutdown cmd only send one character
2) move out accept routine from while loop, let this thread
can read data from acrn-dm continuously.
Tracked-On: #4446
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Yuhong Tao <yuhong.tao@intel.com>
Reviewed-by: Minggui Cao <minggui.cao@intel.com>
Reviewed-by: Wang, Yu1 <yu1.wang@intel.com>
1) remove state machine
2) remove retry mechanism
3) pm thread only use to transmit data,not parse detailed message.
v1-->v2:
remove delay in pm_monitor_loop
Tracked-On: #4446
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Shuo A Liu <shuo.a.liu@intel.com>
Reviewed-by: Minggui Cao <minggui.cao@intel.com>
Reviewed-by: Yuhong Tao <yuhong.tao@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
