From modulization perspective, it's not suitable to put pcpu and vm
related request operations in schedule. So move them to pcpu and vm
module respectively. Also change need_offline return value to bool.
Tracked-On: #3663
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Signed-off-by: Yu Wang <yu1.wang@intel.com>
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
pcpu_active_bitmap was read continuously in wait_pcpus_offline(),
acrn_vcpu->running was read continuously in pause_vcpu(),
add volatile keyword to ensure that such accesses are not
optimised away by the complier.
Tracked-On: #1842
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Currently, the clos id of the cpu cores in vmx root mode is the same as non-root mode.
For RTVM, if hypervisor share the same clos id with non-root mode, the cacheline may
be polluted due to the hypervisor code execution when vmexit.
The patch adds hv_clos in vm_configurations.c
Hypervisor initializes clos setting according to hv_clos during physical cpu cores initialization.
For RTVM, MSR auto load/store areas are used to switch different settings for VMX root/non-root
mode for RTVM.
Tracked-On: #2462
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
-- move 'RFLAGS_AC' to cpu.h
-- move 'VMX_SUPPORT_UNRESTRICTED_GUEST' to msr.h
and rename it to 'MSR_IA32_MISC_UNRESTRICTED_GUEST'
-- move 'get_vcpu_mode' to vcpu.h
-- remove deadcode 'vmx_eoi_exit()'
Tracked-On: #1842
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
move some data structures and APIs related host reset
from vm_reset.c to pm.c, these are not related with guest.
Tracked-On: #1842
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Now, we use native gdt saved in boot context for guest and assume
it could be put to same address of guest. But it may not be true
after the pre-launched VM is introduced. The gdt for guest could
be overwritten by guest images.
This patch make 32bit protect mode boot not use saved boot context.
Insteadly, we use predefined vcpu_regs value for protect guest to
initialize the guest bsp registers and copy pre-defined gdt table
to a safe place of guest memory to avoid gdt table overwritten by
guest images.
Tracked-On: #3532
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
fix violations touched below:
1.Cast operation on a constant value
2.signed/unsigned implicity conversion
3.return value unused.
V1->V2:
1.bitmap api will return boolean type, not need to check "!= 0", deleted.
2.The behaves ~(uint32_t)X and (uint32_t)~X are not defined in ACRN hypervisor Coding Guidelines,
removed the change of it.
Tracked-On: #861
Signed-off-by: Huihuang Shi <huihuang.shi@intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
This patch moves vmx_rdmsr_pat/vmx_wrmsr_pat from vmcs.c to vmsr.c,
so that these two functions would become internal functions inside
vmsr.c.
This approach improves the modularity.
v1 -> v2:
* remove 'vmx_rdmsr_pat'
* rename 'vmx_wrmsr_pat' with 'write_pat_msr'
Tracked-On: #1842
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
In some case, guest need to get more information under virtual environment,
like guest capabilities. Basically this could be done by hypercalls, but
hypercalls are designed for trusted VM/SOS VM, We need a machenism to report
these information for normal VMs. In this patch, vCPUID leaf 0x40000001 will
be used to satisfy this needs that report some extended information for guest
by CPUID.
Tracked-On: #3498
Signed-off-by: Victor Sun <victor.sun@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
After "commit f0e1c5e init vcpu host stack when reset vcpu", SOS resume form S3
wants to schedule to vcpu_thread not the point where SOS enter S3. So we should
schedule to idel first then reschedule to execute vcpu_thread.
Tracked-On: #3387
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
This commit adds ops to vlapic structure, and add an *ops parameter to vlapic_reset().
At vlapic reset, the ops is set to the global apicv_ops, and may be assigned
to other ops later.
Tracked-On: #3227
Signed-off-by: Yan, Like <like.yan@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
vCPU schedule state change is under schedule lock protection. So there's no need
to be atomic.
Tracked-On: #1842
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
ACRN Coding guidelines requires two different types pointer can't
convert to each other, except void *.
Tracked-On: #861
Signed-off-by: Huihuang Shi <huihuang.shi@intel.com>
In almost case, vLAPIC will only be accessed by the related vCPU. There's no
synchronization issue in this case. However, other vCPUs could deliver interrupts
to the current vCPU, in this case, the IRR (for APICv base situation) or PIR
(for APICv advanced situation) and TMR for both cases could be accessed by more
than one vCPUS simultaneously. So operations on IRR or PIR should be atomical
and visible to other vCPUs immediately. In another case, vLAPIC could be accessed
by another vCPU when create vCPU or reset vCPU which could be supposed to be
consequently.
Tracked-On: #1842
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
cancel_event_injection is not need any more if we do 'scheudle' prior to
acrn_handle_pending_request. Commit "921288a6672: hv: fix interrupt
lost when do acrn_handle_pending_request twice" bring 'schedule'
forward, so remove cancel_event_injection related stuff.
Tracked-On: #3374
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
ACRN Coding guidelines requires no dead code.
Tracked-On: #861
Signed-off-by: Huihuang Shi <huihuang.shi@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
Reviewed-by: Li, Fei1 <fei1.li@intel.com>
The current implement will trigger shutdown vm request on the BSP VCPU on the VM,
not the VCPU will trap out because triple fault. However, if the BSP VCPU on the VM
is handling another IO emulation, it may overwrite the triple fault IO request on
the vhm_request_buffer in function acrn_insert_request. The atomic operation of
get_vhm_req_state can't guarantee the vhm_request_buffer will not access by another
IO request if it is not running on the corresponding VCPU. So it should trigger
triple fault shutdown VM IO request on the VCPU which trap out because of triple
fault exception.
Besides, rt_vm_pm1a_io_write will do the right thing which we shouldn't do it in
triple_fault_shutdown_vm.
Tracked-On: #1842
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
vcpu is never scan because of scan tool will be crashed!
After modulization, the vcpu can be scaned by the scan tool.
Clean up the violations in vcpu.c.
Fix the violations:
1.No brackets to then/else.
2.Function return value not checked.
3.Signed/unsigned coversion without cast.
V1->V2:
change the type of "vcpu->arch.irq_window_enabled" to bool.
V2->V3:
add "void *" prefix on the 1st parameter of memset.
Tracked-On: #861
Signed-off-by: Huihuang Shi <huihuang.shi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The current implement will cache each ISR vector in ISR vector stack and do
ISR vector stack check when updating PPR. However, there is no need to do this
because:
1) We will not touch vlapic->isrvec_stk[0] except doing vlapic_reset:
So we don't need to do vlapic->isrvec_stk[0] check.
2) We only deliver higher priority interrupt from IRR to ISR:
So we don't need to check whether vlapic->isrvec_stk interrupts is always increasing.
3) There're only 15 different priority interrupt, It will not happened that more that
15 interrupts could been delivered to ISR:
So we don't need to check whether vlapic->isrvec_stk_top will larger than
ISRVEC_STK_SIZE which is 16.
This patch try to remove ISR vector stack and use isrv to cache the vector number for
the highest priority bit that is set in the ISR.
Tracked-On: #1842
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
The has_rt_vm walk through all VMs to check RT VM flag and if
there is no any RT VM, then return false otherwise return true.
Signed-off-by: Jack Ren <jack.ren@intel.com>
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Reviewed-by: Li, Fei1 <fei1.li@intel.com>
The ept_flush_leaf_page API is used to flush address space
from a ept page entry, user can use it to match walk_ept_mr to
flush VM address space.
Signed-off-by: Jack Ren <jack.ren@intel.com>
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Reviewed-by: Li, Fei1 <fei1.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The walk_ept_table API is used to walk through EPT table for getting
all of present pages, user can get each page entry and its size
from the walk_ept_table callback.
The get_ept_entry is used to getting EPT pointer of the vm, if current
context of mv is secure world, return secure world EPT pointer, otherwise
return normal world EPT pointer.
Signed-off-by: Jack Ren <jack.ren@intel.com>
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Reviewed-by: Li, Fei1 <fei1.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The current implement doesn't clear which access type we support for
APIC-Access VM Exit:
1) linear access for an instruction fetch
-- APIC-access page is mapped as UC which doesn't support fetch
2) linear access (read or write) during event delivery
-- Which is not happened in normal case except the guest went wrong, such as,
set the IDT table in APIC-access page. In this case, we don't need to support.
3) guest-physical access during event delivery;
guest-physical access for an instruction fetch or during instruction execution
-- Do we plan to support enable APIC in real mode ? I don't think so.
Tracked-On: #1842
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
This patch introduces check_vm_vlapic_state API instead of is_lapic_pt_enabled
to check if all the vCPUs of a VM are using x2APIC mode and LAPIC
pass-through is enabled on all of them.
When the VM is in VM_VLAPIC_TRANSITION or VM_VLAPIC_DISABLED state,
following conditions apply.
1) For pass-thru MSI interrupts, interrupt source is not programmed.
2) For DM emulated device MSI interrupts, interrupt is not delivered.
3) For IPIs, it will work only if the sender and destination are both in x2APIC mode.
Tracked-On: #3253
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This patch introduces vLAPIC state for a VM. The VM vLAPIC state can
be one of the following
* VM_VLAPIC_X2APIC - All the vCPUs/vLAPICs (Except for those in Disabled mode) of this
VM use x2APIC mode
* VM_VLAPIC_XAPIC - All the vCPUs/vLAPICs (Except for those in Disabled mode) of this
VM use xAPIC mode
* VM_VLAPIC_DISABLED - All the vCPUs/vLAPICs of this VM are in Disabled mode
* VM_VLAPIC_TRANSITION - Some of the vCPUs/vLAPICs of this VM (Except for those in Disabled mode)
are in xAPIC and the others in x2APIC
Upon a vCPU updating the IA32_APIC_BASE MSR to switch LAPIC mode, this
API is called to sync the vLAPIC state of the VM. Upon VM creation and reset,
vLAPIC state is set to VM_VLAPIC_XAPIC, as ACRN starts the vCPUs vLAPIC in
XAPIC mode.
Tracked-On: #3253
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
is_xapic_enabled API returns true if vLAPIC is in xAPIC mode. In
all other cases, it returns false.
Tracked-On: #3253
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Remove static and inline attributes to the API is_x2apic_enabled
and declare a prototype in vlapic.h. Also fix the check performed on guest
APICBASE_MSR value to query vLAPIC mode.
Tracked-On: #3253
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
On SDC scenario, SOS VM id is fixed to 0 so some hypercalls from guest
are using hardcoded "0" to represent SOS VM, this would bring issues
for HYBRID scenario which SOS VM id is non-zero.
Now introducing a new VM id concept for DM/VHM hypercall APIs, that
return a relative VM id which is from SOS view when create VM for post-
launched VMs. DM/VHM could always treat their own vm id is "0". When they
make hypercalls, hypervisor will convert the VM id to the absolute id
when dispatch the hypercalls.
Tracked-On: #3214
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@Intel.com>
The VM IDs which is high or equal then CONFIG_MAX_VM_NUM are all
invalid VM IDs, the MACRO has never been referenced in code, so
remove it;
Tracked-On: #3214
Signed-off-by: Victor Sun <victor.sun@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Different kernel has different load method, it should be configurable
in vm configurations;
Tracked-On: #3214
Signed-off-by: Victor Sun <victor.sun@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
The guest OS of ACRN will not be limited to Linux, so refine the struct
of sw_linux to more generic sw_module_info. Currently bootargs and ramdisk
are only supported modules but we can include more modules in future;
Tracked-On: #3214
Signed-off-by: Victor Sun <victor.sun@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Present SGX related MSRs to guest if SGX is supported.
- MSR_IA32_SGXLEPUBKEYHASH0 ~ MSR_IA32_SGXLEPUBKEYHASH3:
SGX Launch Control is not supported, so these MSRs are read only.
- MSR_IA32_SGX_SVN_STATUS:
read only
- MSR_IA32_FEATURE_CONTROL:
If SGX is support in VM, opt-in SGX in this MSR.
- MSR_SGXOWNEREPOCH0 ~ MSR_SGXOWNEREPOCH1:
The two MSRs' scope is package level, not allow guest to change them.
Still leave them in unsupported_msrs array.
Tracked-On: #3179
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
At the time the guest is switching to X2APIC mode, different VCPUs in the
same VM could expect the setting of the per VM msr_bitmap differently,
which could cause problems.
Considering different approaches to address this issue:
1) only guest BSP can update msr_bitmap when switching to X2APIC.
2) carefully re-write the update_msr_bitmap_x2apic_xxx() functions to
make sure any bit in the bitmap won't be toggled by the VCPUs.
3) make msr_bitmap as per VCPU.
We chose option 3) because it's simple and clean, though it takes more
memory than other options.
BTW, need to remove const modifier from update_msr_bitmap_x2apic_xxx()
functions to get it compiled.
Tracked-On: #3166
Signed-off-by: Zide Chen <zide.chen@intel.com>
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
- add the GUEST_FLAG_HIGHEST_SEVERITY flag to indicate that the guest has
privilege to reboot the host system.
- this flag is statically assigned to guest(s) in vm_configurations.c in
different scenarios.
- implement reset_host() function to reset the host. First try the ACPI
reset register if available, then try the 0xcf9 PIO.
Tracked-On: #3145
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Signed-off-by: Zide Chen <zide.chen@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
ACRN supports LAPIC emulation for guests using x86 APICv. When guest OS/BIOS
switches from xAPIC to x2APIC mode of operation, ACRN also supports switching
froom LAPIC emulation to LAPIC passthrough to guest. User/developer needs to
configure GUEST_FLAG_LAPIC_PASSTHROUGH for guest_flags in the corresponding
VM's config for ACRN to enable LAPIC passthrough.
This patch does the following
1)Fixes a bug in the abovementioned feature. For a guest that is
configured with GUEST_FLAG_LAPIC_PASSTHROUGH, during the time period guest is
using xAPIC mode of LAPIC, virtual interrupts are not delivered. This can be
manifested as guest hang when it does not receive virtual timer interrupts.
2)ACRN exposes physical topology via CPUID leaf 0xb to LAPIC PT VMs. This patch
removes that condition and exposes virtual topology via CPUID leaf 0xb.
Tracked-On: #3136
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
This patch removes hard-coded interfaces in .rst files and
refers to the definition via doxygen style comments.
This patch mainly focus on Hypervisor part.
Other parts will be covered in seperate patches.
Tracked-On: #1595
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
the pcpu just write its own vmcs, not need spinlock.
and the arch.lock not used other places, remove it too.
Tracked-On: #3130
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
now only SOS need decide boot with de-privilege or direct boot mode, while
for other pre-launched VMs, they should use direct boot mode.
this patch merge boot/guest/direct_boot_info.c &
boot/guest/deprivilege_boot_info.c into boot/guest/vboot_info.c,
and change init_direct_vboot_info() function name to init_general_vm_boot_info().
in init_vm_boot_info(), depend on get_sos_boot_mode(), SOS may choose to init
vm boot info by setting the vm_sw_loader to deprivilege specific one; for SOS
using DIRECT_BOOT_MODE and all other VMS, they will use general_sw_loader as
vm_sw_loader and go through init_general_vm_boot_info() for virtual boot vm
info filling.
this patch also move spurious handler initilization for de-privilege mode from
boot/guest/deprivilege_boot.c to boot/guest/vboot_info.c, and just set it in
deprivilege sw_loader before irq enabling.
Changes to be committed:
modified: Makefile
modified: arch/x86/guest/vm.c
modified: boot/guest/deprivilege_boot.c
deleted: boot/guest/deprivilege_boot_info.c
modified: boot/guest/direct_boot.c
renamed: boot/guest/direct_boot_info.c -> boot/guest/vboot_info.c
modified: boot/guest/vboot_wrapper.c
modified: boot/include/guest/deprivilege_boot.h
modified: boot/include/guest/direct_boot.h
modified: boot/include/guest/vboot.h
new file: boot/include/guest/vboot_info.h
modified: common/vm_load.c
modified: include/arch/x86/guest/vm.h
Tracked-On: #1842
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Handle the PIO reset register that is defined in host ACPI:
Parse host FADT table to get the host reset register info, and emulate
it for Service OS:
- return all '1' for guest reads because the read behavior is not defined
in ACPI.
- ignore guest writes with the reset value to stop it from resetting host;
if guest writes other values, passthru it to hardware in case the reset
register supports other functionalities.
Tracked-On: #2700
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Signed-off-by: Zide Chen <zide.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This patch implements triple fault vmexit handler and base on VM types:
- post-launched VMs: shutdown_target_vm() injects S5 PIO write to request
DM to shut down the target VM.
- pre-launched VMs: shut down the guest.
- SOS: similarly, but shut down all the non real-time post-launched VMs that
depend to SOS before shutting down SOS.
Tracked-On: #2700
Signed-off-by: Zide Chen <zide.chen@intel.com>
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
- post-launched RTVM: intercept both PIO ports so that hypervisor has a
chance to set VM_POWERING_OFF flag.
- all other type of VMs: deny these 2 ports from guest access so that
guests are not able to reset host.
Tracked-On: #2700
Signed-off-by: Zide Chen <zide.chen@intel.com>
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
For pre-launched VMs and SOS, VM shutdown should not be executed in the
current VM context.
- implement NEED_SHUTDOWN_VM request so that the BSP of the target VM can shut
down the guest in idle thread.
- implement shutdown_vm_from_idle() to shut down target VM.
Tracked-On: #2700
Signed-off-by: Zide Chen <zide.chen@intel.com>
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Add MSR_IA32_MISC_ENABLE to emulated_guest_msrs to enable the emulation.
Init MSR_IA32_MISC_ENABLE for guest.
Tracked-On: #2834
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Replace the vm state VM_STATE_INVALID to VM_POWERED_OFF.
Also replace is_valid_vm() with is_poweroff_vm().
Add API is_created_vm() to identify VM created state.
Tracked-On: #3082
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
vm_config.h has included types.h/acrn_common.h/vm_configurations.h,
acrn_common.h has included types.h, so remove the redundant includes;
Tracked-On: #2291
Signed-off-by: Victor Sun <victor.sun@intel.com>
Rename 'type' in struct io_request to 'io_type' to be more readable.
Tracked-On: #3061
Signed-off-by: Conghui Chen <conghui.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The name NORMAL_VM does not clearly reflect the attribute that these VMs
are launched "later". POST_LAUNCHED_VM is closer to the fact
that these VMs are launched "later" by one of the VMs launched by ACRN.
Tracked-On: #3034
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
In previous code, only for pre-launched VM, hypervisor would create
vuart console for each VM. But for post-launched VM, no vuart is
created.
In this patch, create vuart according to configuration in structure
acrn_vm_config. As the new configuration is set for pre-launched VM and
post-launched VM, and the vuart initialize process is common for each
VM, so, remove CONFIG_PARTITION_MODE from vuart related code.
Tracked-On: #2987
Signed-off-by: Conghui Chen <conghui.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
According to SDM 10.6.1, if dest fields is 0xffU for register
ICR operation, that means the IPI is for broadcast.
According to SDM 10.12.9, 0xffffffffU of dest fields for x2APIC
means IPI is for broadcast.
We add new parameter to vlapic_calc_dest() to show whether the
dest is for broadcast. For IPI, we will set it according to
dest fields. For ioapic and MSI, we hardcode it to false because
no broadcast for ioapic and MSI.
Tracked-On: #3003
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
When in fully APICv mode, we enable VID. All pending delivery interrupts
will inject to VM before VM entry. So there is no pending delivery interrupt.
However, if VID is not enabled, we can only inject pending delivery interrupt
one by one. So we always need to do this check.
Tracked-On: #1842
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
apicv_advanced_inject_intr is used if APICv fully features are supported,
it uses PIR to inject interrupt. otherwise, apicv_basic_inject_intr is used.
it will use VMCS INTR INFO field to inject irq.
Tracked-On: #1842
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
The APICv ops is decided once the APICv feature on the physical platform is detected.
We will use apicv_advanced_ops if the physical platform support fully APICv feature;
otherwise, we will use apicv_basic_ops.
This patch only wrap the accept interrupt API for them.
Tracked-On: #1842
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
- The target vm in most of hypercalls should be a NORMAL_VM, in some
exceptions it might be a SOS_VM, we should validate them.
- Please be aware that some hypercall might have limitation on specific
target vm like RT or SAFETY VMs, this leaves "TODO" in future;
- Unify the coding style:
int32_t hcall_foo(vm, target_vm_id, ...)
{
int32_t ret = -1;
...
if ((is_valid_vm(target_vm) && is_normal_vm(target_vm)) {
ret = ....
}
return ret;
}
Tracked-On: #2978
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Add TPR below threshold implement for "Virtual-interrupt delivery" not support.
Windows will use it to delay interrupt handle.
Complete all the interrupts in IRR as long as they are higher priority than
current TPR. Once current IRR priority is less than current TPR enable TPR
threshold to IRR, so that if guest reduces the TPR threshold, it would be good
to take below TPR threshold exit and let interrupts to go thru.
Tracked-On: #1842
Signed-off-by: Zheng, Gen <gen.zheng@intel.com>
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Enable vMCE feature to boot windows guest.
vMCE is set in EDX from Microsoft TLFS spec, to support windows guest
vMCA and vMCE should be supported by guest CPUID.
Support MSR_IA32_MCG_CAP and MSR_IA32_MCG_STATUS reading when vMCE is enabled,
but they are not emulated yet, so return 0 directly.
Tracked-On: #1867
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Reviewed-by: Yu Wang <yu1.wang@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
ACRN builds mptable for pre-launched VMs. It uses CONFIG_PARTITION_MODE
to compile mptable source code and related support. This patch removes
the macro and checks if the type of VM is pre-launched to build mptable.
Tracked-On: #2941
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Currently VM id of NORMAL_VM is allocated dymatically, we need to make
VM id statically for FuSa compliance.
This patch will pre-configure UUID for all VMs, then NORMAL_VM could
get its VM id/configuration from vm_configs array by indexing the UUID.
If UUID collisions is found in vm configs array, HV will refuse to
load the VM;
Tracked-On: #2291
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The code mixed the usage on term of UUID and GUID, now use UUID to make
code more consistent, also will use lowercase (i.e. uuid) in variable name
definition.
Tracked-On: #2291
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
We could call vlapic API directly, remove vlapic_rdmsr/wrmsr to make things easier.
Tracked-On: #1842
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Now the io_emul.c is relates with arch,io_req.c is common,
move some APIs from io_emul.c to io_req.c as common like these APIs:
register_pio/mmio_emulation_handler
dm_emulate_pio/mmio_complete
pio_default_read/write
mmio_default_access_handler
hv_emulate_pio/mmio etc
Tracked-On: #1842
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Move ‘emul_pio[]/default_io_read/default_io_write’
from struct vm_arch to struct acrn_vm
Tracked-On: #1842
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
-- this api is related with arch_x86, then move to x86 folder
-- rename 'set_vhm_vector' to 'set_vhm_notification_vector'
-- rename 'acrn_vhm_vector' to 'acrn_vhm_notification_vector'
-- add an API 'get_vhm_notification_vector'
Tracked-On: #1842
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Add, update '@return' and '@retval' statements to the API descriptions related
to vCPU operations.
Tracked-On: #1844
Signed-off-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
As vector re-mapping is enabled for pre-launched/partition mode VMs,
there is no more need for separate interrupt routine i.e.
partition_mode_dispatch_interrupt.
Tracked-On: #2879
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
For pre-launched VMs MSI/MSI-x configuration writes are not intercepted by ACRN.
It is pass-thru and interrupts land in ACRN and the guest vector is injected into
the VM's vLAPIC. With this patch, ACRN intercepts MSI/MSI-x config writes and take
the code path to remap interrupt vector/APIC ID as it does for SOS/UOS.
Tracked-On: #2879
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
This patch mainly does the following:
- Replace prefix RT_VM_ with VIRTUAL_.
- Remove the check of "addr != RT_VM_PM1A_CNT_ADDR" as the handler is specific for this addr.
- Add comments about the meaning of return value.
Tracked-On: #2865
Signed-off-by: Kaige Fu <kaige.fu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
After using get_vm_from_vmid(), vm pointer is always not NULL. But there are still many NULL pointer checks.
This commit replaced the NULL vm pointer check with a validation check which checks the vm status.
In addition, NULL check for pointer returned by get_sos_vm() and get_vm_config() is removed.
Tracked-On: #2520
Signed-off-by: Yan, Like <like.yan@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Add the default handlers for PIO and MMIO access which returns all
FFs on read and discards write. These default handlers are registered
when SOS VM or pre-launched VM is created.
v3 -> v4:
- use single layer if in hv_emulate_pio
- change the implementation of pio_default_read
v2 -> v3:
- use runtime vm type instead of CONFIG_PARTITION_MODE
- revise the pio/mmio emulation functions
- revise the pio/mmio default read functions according to MISRA C
- revise the commit message
v1 -> v2:
- add default handlers members in struct acrn_vm and add interfaces
to register default handlers for PIO and MMIO.
Tracked-On: #2860
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
We set the vm state as VM_POWERING_OFF when RTVM is trying to poweroff by itself.
We will check it when trying to pause vCPUs of RTVM. Only if vm state equal to
VM_POWERING_OFF, we take action to pause the vCPUs of RTVM. Otherwise, we will
reject the pause request.
Tracked-On: #2865
Signed-off-by: Kaige Fu <kaige.fu@intel.com>
The virtual pm port of RTVM is intercepted by HV. But the HV needs to inform the DM as well.
So we will forward the virtual S5 request to DM too
The handler in HV just set the pm state flag (VM_POWERING_OFF) which indicate that the RTVM is powering
off by itself. Meanwhile, there are data resources in VHM and DM should be released once we handle the PM
of RTVM in HV. So, return to DM to go through the entire VM destroy cycles to release the resources.
During the cycles, the DM will try to pause vm through hypercall. In the hypercall handler in HV, we will
check the pm state flag. If it is set, pause all the vCPUs of the vm. Otherwise, reject the request.
In this way, we can make sure that RTVM can only trigger its s5 by itself. All
other S5 request from external will be rejected.
Here is sequence chart of RTVM s5.
poweroff
+-----------+ +----------+ +-----------+ +----------+
| vBSP | | vAPs | | HV | | DM |
+-----+-----+ +----------+ +-----+-----+ +-----+----+
| | | |
| Stop all other cpus | | |
+----------------------------+ | |
| | |Disable LAPIC | |
| +<-+ | |
| | | |
| +--+ | |
| | |HLT in | |
| All other cpus stopped | |non-root mode | |
+----------------------------+ | |
| Call ACPI method to enter s5 | |
+-------------------------+---------------------> | |
| | Set s5 flag | |
| | <---------------------+ |
| | APs paused | Re-inject IOREQ TO DM
| | +-------------------> +-------------------> +
| | | Pause VM |
| | Check S5 flag: | <-------------------+
| | - If set, pause vm | VM paused |
| | - If no, reject | +-----------------> +--+
| | | Destroy VM | |Deinit works
| | | <--------------------<-+
| | | VM destroyed |
| | | +-----------------> |
+ + + +
Tracked-On: #2865
Signed-off-by: Kaige Fu <kaige.fu@intel.com>
This patch checks if the GUEST_FLAG_RT is set when GUEST_FLAG_LAPIC_PASSTHROUGH is set.
If GUEST_FLAG_RT is not set while GUEST_FLAG_LAPIC_PASSTHROUGH is set, we will refuse
to boot the VM.
Meanwhile, this patch introduces a new API is_rt_vm.
Tracked-On: #2865
Signed-off-by: Kaige Fu <kaige.fu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
In hypervisor fuzzing test, hypervisor will hang
if issuing HV_VM_SET_MEMORY_REGIONS hypercall after
target VM is destroyed.
this patch is to fix above vulnerability.
Tracked-On: #2849
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Since we always enable "Use TPR shadow", so operate on TPR will not
trigger VM exit. So remove these APIs.
Tracked-On: #1842
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Currently MSR IA32_MISC_ENABLE is passthrough to guest.
However, guest may change the value of this MSR, which will cause issue in hypervisor.
This patch uses VMX MSR store area to isolate the MSR IA32_MISC_ENABLE between guest and host.
TODO:
Some bits of the MSR IA32_MISC_ENABLE is not just per core, but per package.
So need to check if need to prevent guest from setting or clearing these bits that may affect other cores.
Tracked-On: #2834
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Rename the field msr_num to msr_index, which is more accurate,
in struct msr_store_entry.
Tracked-On: #2834
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
Previously vrtc is for partition mode only, now enable it for sharing mode;
Tracked-On: #2291
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Now we only configure "hide MTRR" explicitly to false for SOS. For other VMs,
we don't configure it which means hide_mtrr is false by default.
And remove global config MTRR_ENABLED
Tracked-On: #1842
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
1. move seed_info structure from trusty.h to seed.h
2. replace "#include <hypervisor.h>" with necessary including headers
in seed.c/seed_abl.c/seed_sbl.c
Tracked-On: #2777
Signed-off-by: Qi Yadong <yadong.qi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Remove vmx_cr0/vmx_cr4 from ext_context structure, they are duplicated
with cr0/cr4 fields in run_context.
Switch cr0/cr4 of run_context structure on demand when do world switch.
Remove vmx_cr0_read_shadow/vmx_cr4_read_shadow from ext_context structure.
These fields should be same for both normal world and secure world.
Tracked-On: #2773
Signed-off-by: Qi Yadong <yadong.qi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
In order to remove the usage of hypervisor.h,
modularize the boot folder.
Current changes include modifications to remove
usage of acrn_vm structure pointer, from some of
the call, and remove calls to hypervisor.h,
as and when deemed fit.
Removed hva2gpa, as this was not used anywhere else
after the changes.
Tracked-On: #2694
Signed-off-by: Arindam Roy <arindam.roy@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
move instr_emul_ctxt instance from struct per_cpu_region
to struct vcpu, and rename it from g_inst_ctxt to inst_ctxt
Tracked-On: #1842
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
now the 'cpu_mode' is unused in struct vm_guest_paging,
and there is the same variable in struct acrn_vcpu_arch
Tracked-On: #1842
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This patch mainly unifies init_vm_boot_info's implementation between SBL and
UEFI.
Tracked-On: #2708
Signed-off-by: Tw <wei.tan@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This patch unifies the bsp interface between UEFI and SBL.
Tracked-On: #2708
Signed-off-by: Tw <wei.tan@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This patch simplifies `get_primary_vcpu` and `vcpu_from_vid`.
The target_vcpu could be get from the index directly.
Tracked-On: #1842
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Correct wrong use of vector where lvt_index should be used.
Tracked-On: #1842
Signed-off-by: Min He <min.he@intel.com>
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
pci_vdevs is vpci stuff so it would be better to make it managed by vpci rather than by vm.h,
both sharing mode and partition mode can use pci_vdevs[] to maintain its own
per vm vdev list.
Tracked-On: #2534
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
- Do not refer vm_configs[] directly in vm module;
Tracked-On: #2291
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
- move sanitize_vm_config() from vm.c to vm_config.c;
- move get_vm_config() from vm.h to vm_config.h;
Tracked-On: #2291
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
When CAT is supported, UOS can setup acrn_vm_config.clos, to use CAT
feature. Eg.,
struct acrn_vm_config vm_configs[CONFIG_MAX_VM_NUM] = {
{
.guest_flags |= CLOS_REQUIRED,
.clos = 1,
},
};
sanitize_vm_config() will check if CAT is supported and
vm_configs.clos is valid.
Tracked-On: #2462
Signed-off-by: Tao Yuhong <yuhong.tao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
1) The previous implementaion will recalculate the whole EOI-exit bitmap for
each RTE once the destination, trigger mode, delivery mode or vector of a RTE
has changed and update the EOI-exit bitmap for each vcpu of the VM.
In this patch, only set the corresponding bit of EOI-exit bitmap for
a vcpu when a level triggered interrupt has accepted in IRR or clear the
corresponding bit of EOI-exit bitmap for a vcpu when a dege triggered interrupt
has accepted in IRR which means only update a bit of EOI-exit bitmap in a vcpu
when updating TMR.
2) Rename set eoi_exit related API to set eoi_exit_bitmap.
Tracked-On: #1842
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
remove vpci_vdev_array in vm_config struct as it is not used any more;
Tracked-On: #2291
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
