Conceptually, the devices unregistration sequence of the shutdown process should be
opposite to create.
Tracked-On: #4550
Signed-off-by: Li Fei1 <fei1.li@intel.com>
We could use container_of to get vm structure pointer from vpci. So vm
structure pointer is no need in vpci structure.
Tracked-On: #4550
Signed-off-by: Li Fei1 <fei1.li@intel.com>
There're some PCI devices need special handler for vendor-specical feature or
capability CFG access. The Intel GPU is one of them. In order to keep the ACRN-HV
clean, we want to throw the qurik part of PCI CFG asccess to DM to handle.
To achieve this, we implement per-device policy base on whether it needs quirk handler
for a VM: each device could configure as "quirk pass through device" or not. For a
"quirk pass through device", we will handle the general part in HV and the quirk part
in DM. For a non "quirk pass through device", we will handle all the part in HV.
Tracked-On: #4371
Signed-off-by: Li Fei1 <fei1.li@intel.com>
There're some cases the SOS (higher severity guest) needs to access the
post-launched VM (lower severity guest) PCI CFG space:
1. The SR-IOV PF needs to reset the VF
2. Some pass through device still need DM to handle some quirk.
In the case a device is assigned to a UOS and is not in a zombie state, the SOS
is able to access, if and only if the SOS has higher severity than the UOS.
Tracked-On: #4371
Signed-off-by: Li Fei1 <fei1.li@intel.com>
To avoid information leakage, we need to ensure that the device is
inaccessble when it does not exist.
For SR-IOV disabled VF device, we have the following operations.
1. The configuration space accessing will get 0xFFFFFFFF as a
return value after set the device state to zombie.
2. The BAR MMIO EPT mapping are removed, the accesssing causes
EPT violation.
3. The device will be detached from IOMMU.
4. The IRQ pin and vector are released.
Tracked-On: #4433
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
change vmsi_read_cfg to read_vmsi_cfg, same applies to writing
change vmsix_read_cfg to read_vmsix_cfg, same applies to writing
Tracked-On: #4433
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
In order to add GVT-D support, we need pass through stolen memory and opregion memroy
to the post-launched VM. To implement this, we first reserve the GPA for stolen memory
and opregion memory through post-launched VM e820 table. Then we would build EPT mapping
between the GPA and the stolen memory and opregion memory real HPA. The last, we need to
return the GPA to post-launched VM if it wants to read the stolen memory and opregion
memory address and prevent post-launched VM to write the stolen memory and opregion memory
address register for now.
We do the GPA reserve and GPA to HPA EPT mapping in ACRN-DM and the stolen memory and
opregion memory CFG space register access emulation in ACRN-HV.
Tracked-On: #4371
Signed-off-by: Li Fei1 <fei1.li@intel.com>
VM needs to check if it owns this device before deiniting it.
Tracked-On: #4433
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
We didn't support SR-IOV capability of PF in UOS for now, we should
hide the SR-IOV capability if we pass through the PF to a UOS.
For now, we don't support assignment of PF to a UOS.
Tracked-On: #4433
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@Intel.com>
Emulate Device ID, Vendor ID and MSE(Memory Space Enable) bit in
configuration space for an assigned VF, initialize assgined VF Bars.
The Device ID comes from PF's SRIOV capability
The Vendor ID comes from PF's Vendor ID
The PCI MSE bit always be set when VM reads from an assigned VF.
Tracked-On: #4433
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Change name find_vdev to find_available_vdev and add comments
Tracked-On: #4433
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Add _v prefix for some function name to indicate this function wants to operate
on virtual CFG space or virtual BAR register.
Tracked-On: #4371
Signed-off-by: Li Fei1 <fei1.li@intel.com>
Removed the pci_vdev_write_cfg_u8/u16/u32 APIs and only used
pci_vdev_write_cfg as the API for writing vdev's cfgdata
Tracked-On: #4433
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Add cfg_header_read_cfg and cfg_header_write_cfg to handle the 1st 64B
CFG Space header PCI configuration space.
Only Command and Status Registers are pass through;
Only Command and Status Registers and Base Address Registers are writable.
In order to implement this, we add two type bit mask for per 4B register:
pass through mask and read-only mask. When pass through bit mask is set, this
means this bit of this 4B register is pass through, otherwise, it is virtualized;
When read-only mask is set, this means this bit of this 4B register is read-only,
otherwise, it's writable. We should write it to physical CFG space or virtual
CFG space base on whether the pass through bit mask is set or not.
Tracked-On: #4371
Signed-off-by: Li Fei1 <fei1.li@intel.com>
Make the name of the functions more accurate
Tracked-On: #4433
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Add a new parameter pf_vdev for function vpci_init_vdev to support SRIOV
VF vdev initializaiton.
Tracked-On: #4433
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
To support SRIOV capability initialization, add a new parameter
is_sriov_pf_vdev for init_vdev_pt function.
If parameter is_sriov_pf_vdev of function init_vdev_pt is true,
then function init_vdev_pt initializes the vdev's SRIOV capability.
Tracked-On: #4433
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Introduce SRIOV capability field for pci_vdev and add SRIOV capability
interception entries.
Tracked-On: #4433
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
add vpci bridge operations in hypervisor, to avoid SOS mis-operations
to affect other VM's PCI devices.
assumption: before hypervisor bootup, the physical pci-bridge shall be
configured correctly by BIOS or other bootloader; for ACS (Access
Control Service) capability, it is configured by BIOS to support the
devices under it to be isolated and allocated to different VMs.
to simplify the emulations of vpci bridge, set limitations as following:
1. expose all configure space registers, but readonly
2. BIST not support; by default is 0
3. not support interrupt, including INTx and MSI.
TODO:
1. configure tool can select whether a PCI bridge is emulated or pass
through.
Open:
1. SOS how to reset PCI device under the PCI bridge?
Tracked-On: #3381
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Acked-by: Eddie Dong <eddie.dong@Intel.com>
Now only PCI MSI-X BAR access need dynamic register/unregister. Others don't need
unregister once it's registered. So we don't need to lock the vm level emul_mmio_lock
when we handle the MMIO access. Instead, we could use finer granularity lock in the
handler to ptotest the shared resource.
This patch fixed the dead lock issue when OVMF try to size the BAR size:
Becasue OVMF use ECAM to access the PCI configuration space, it will first hold vm
emul_mmio_lock, then calls vpci_handle_mmconfig_access. While this tries to size a
BAR which is also a MSI-X Table BAR, it will call register_mmio_emulation_handler to
register the MSI-X Table BAR MMIO access handler. This will causes the emul_mmio_lock
dead lock.
Tracked-On: #3475
Signed-off-by: Li Fei1 <fei1.li@intel.com>
Now we split passthrough PCI device from DM to HV, we could remove all the passthrough
PCI device unused code.
Tracked-On: #4371
Signed-off-by: Li Fei1 <fei1.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
In this case, we could handle all the passthrough PCI devices in ACRN hypervisor.
But we still need DM to initialize BAR resources and Intx for passthrough PCI
device for post-launched VM since these informations should been filled into
ACPI tables. So
1. we add a HC vm_assign_pcidev to pass the extra informations to replace the old
vm_assign_ptdev.
2. we saso remove HC vm_set_ptdev_msix_info since it could been setted by the post-launched
VM now same as SOS.
3. remove vm_map_ptdev_mmio call for PTDev in DM since ACRN hypervisor will handle these
BAR access.
4. the most important thing is to trap PCI configure space access for PTDev in HV for
post-launched VM and bypass the virtual PCI device configure space access to DM.
This patch doesn't do the clean work. Will do it in the next patch.
Tracked-On: #4371
Signed-off-by: Li Fei1 <fei1.li@intel.com>
Add assign/deassign PCI device hypercall APIs to assign a PCI device from SOS to
post-launched VM or deassign a PCI device from post-launched VM to SOS. This patch
is prepared for spliting passthrough PCI device from DM to HV.
The old assign/deassign ptdev APIs will be discarded.
Tracked-On: #4371
Signed-off-by: Li Fei1 <fei1.li@intel.com>
This patch checks the validity of 'vdev->pdev' to
ensure physical device is linked to 'vdev'.
this check is to avoid some potential hypervisor
crash when destroying VM with crafted input.
Tracked-On: #4336
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Reviewed-by: Fei Li <fei1.li@intel.com>
SOS will use PCIe ECAM access PCIe external configuration space. HV should trap this
access for security(Now pre-launched VM doesn't want to support PCI ECAM; post-launched
VM trap PCIe ECAM access in DM).
Besides, update PCIe MMCONFIG region to be owned by hypervisor and expose and pass through
platform hide PCI devices by BIOS to SOS.
Tracked-On: #3475
Signed-off-by: Li Fei1 <fei1.li@intel.com>
Since we restore BAR values when writing Command Register if necessary. We don't
need to trap FLR and do the BAR restore then.
Tracked-On: #3475
Signed-off-by: Li Fei1 <fei1.li@intel.com>
When PCIe does Conventinal Reset or FLR, almost PCIe configurations and states will
lost. So we should save the configurations and states before do the reset and restore
them after the reset. This was done well by BIOS or Guest now. However, ACRN will trap
these access and handle them properly for security. Almost of these configurations and
states will be written to physical configuration space at last except for BAR values
for now. So we should do the restore for BAR values. One way is to do restore after
one type reset is detected. This will be too complex. Another way is to do the restore
when BIOS or guest tries to write the Command Register. This could work because:
1. The I/O Space Enable bit and Memory Space Enable bits in Command Register will reset
to zero.
2. Before BIOS or guest wants to enable these bits, the BAR couldn't be accessed.
3. So we could restore the BAR values before enable these bits if reset is detected.
Tracked-On: #3475
Signed-off-by: Li Fei1 <fei1.li@intel.com>
ACRN hypervisor should trap guest doing PCI AF FLR. Besides, it should save some status
before doing the FLR and restore them later, only BARs values for now.
This patch will trap guest Conventional PCI Advanced Features Control Register write
operation if the device supports Conventional PCI Advanced Features Capability and
check whether it wants to do device AF FLR. If it does, call pdev_do_flr to do the job.
Tracked-On: #3465
Signed-off-by: Li Fei1 <fei1.li@intel.com>
ACRN hypervisor should trap guest doing PCIe FLR. Besides, it should save some status
before doing the FLR and restore them later, only BARs values for now.
This patch will trap guest Device Capabilities Register write operation if the device
supports PCI Express Capability and check whether it wants to do device FLR. If it does,
call pdev_do_flr to do the job.
Tracked-On: #3465
Signed-off-by: Li Fei1 <fei1.li@intel.com>
After reshuffle pci_bar structrue we could write ~0U not BAR size mask to BAR
configuration space directly when do BAR sizing. In this case, we could know whether
the value in BAR configuration space is a valid base address. As a result, we could
do BAR re-programming whenever we want.
Tracked-On: #3475
Signed-off-by: Li Fei1 <fei1.li@intel.com>
The current code declare pci_bar structure following the PCI bar spec. However,
we could not tell whether the value in virtual BAR configuration space is valid
base address base on current pci_bar structure. We need to add more fields which
are duplicated instances of the vBAR information. Basides these fields which will
added, bar_base_mapped is another duplicated instance of the vBAR information.
This patch try to reshuffle the pci_bar structure to declare pci_bar structure
following the software implement benefit not the PCI bar spec.
Tracked-On: #3475
Signed-off-by: Li Fei1 <fei1.li@intel.com>
Concurrent access on PCI device may happened if UOS try to access PCI configuration
space on different vCPUs through IO port. This patch just adds a global PCI lock for
each VM to prevent the concurrent access.
Tracked-On: #3475
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Refine PCI CONFIG_ADDRESS Register definition as its physical layout.
In this case, we could read/write PCI CONFIG_ADDRESS Register atomically.
Tracked-On: #3475
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
--remove unnecessary includes
--remove unnecssary forward-declaration for 'struct vhm_request'
Tracked-On: #861
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
In "commit 6ebc22" the vPCI device initialize sequence is wrong changed. This patch
tries to revert it.
Tracked-On: #3475
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
PCI BAR physical base address will never changed. Cache it to avoid calculating
it every time when we access it.
Tracked-On: #3475
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@Intel.com>
Currently, 'flags' is defined and set but never be used
in the flow of handling i/o request after then.
Tracked-On: #861
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
In the definition of port i/o handler, struct acrn_vm * pointer
is redundant as input, as context of acrn_vm is aleady linked
in struct acrn_vcpu * by vcpu->vm, 'vm' is not required as input.
this patch removes argument '*vm' from 'io_read_fn_t' &
'io_write_fn_t', use '*vcpu' for them instead.
Tracked-On: #861
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
When assgined a PCI PTDev to post-launched VM from SOS, using a pointer to point to
the real struct pci_vdev. When post-launched VM access its PTDev configure space in
SOS address space, using this real struct pci_vdev.
Tracked-On: #3475
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Add a field (vdev_ops) in struct acrn_vm_pci_dev_config to configure a PCI CFG
operation for an emulated PCI device. Use pci_pt_dev_ops for PCI_DEV_TYPE_PTDEV
by default if there's no such configure.
Tracked-On: #3475
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Create an iommu domain for all guest in vpci_init no matter if there's a PTDev
in it.
Tracked-On: #3475
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
Reviewed-by: Dongsheng Zhang <dongsheng.x.zhang@intel.com>
Now almost the vPCI device information could be obtain from PCI device configure
in VM configure. init_vdevs could make things more easier.
And rename init_vdevs to vpci_init_vdevs, init_vdev to vpci_init_vdevs to avoid
MISRA-C violations.
Tracked-On: #3475
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
Reviewed-by: Dongsheng Zhang <dongsheng.x.zhang@intel.com>
pci_dev_config in VM configure stores all the PCI devices for a VM. Besides PT
devices, there're other type devices, like virtual host bridge. So rename ptdev
to pci_dev for these configure.
Tracked-On: #3475
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The functions always return 0 so it makes sense to make them void functions
Tracked-On: #3475
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The caller function has already done the checking to make sure the req is targeted
for the called functions, so there is no need to do the same checking in called
functions.
Remove calling of is_bar_offset() in vdev_pt_read_cfg/vdev_pt_write_cfg:
In vpci.c's vpci_read_pt_dev_cfg and vpci_write_dev_cfg, vbar_access is called
first to make sure the req is targed for vdev pt (vbar emulation) before
dispatching the request to vdev_pt_read_cfg/vdev_pt_write_cfg, so there is no
need to call is_bar_offset() again to do the same checking in vdev_pt_read_cfg/vdev_pt_write_cfg.
The same goes for msicap_access/msixcap_access
vbar_access should only check if the req is for bar access, it should not care
about whether the bar access is 4 bytes or 4 bytes aligned. The called function
vdev_pt_write_vbar will check and ignore the write access if it is not 4 bytes or 4 bytes
aligned, although this is counted as a bar access.
vdev_pt_read_vbar will check if the read access is 4 bytes or 4 bytes
aligned, although this is counted as a bar access, set read value (*val) to
-1 if the access is not 4 bytes (or aligned).
Tracked-On: #3475
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This is a followup patch to fix the coding style issue introduced
in by commit "c2d25aafb889ade954af8795df2405a94024d860":
The unmodified pointer should be defined as const
Also addressed one comments from Fei to use reversed function call
in vpci_init_pt_dev and vpci_deinit_pt_dev.
Tracked-On: #3241
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
And use vhostbridge for both SOS and pre-launched VM.
Tracked-On: #3241
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
And use the ops based operations instead of direct access vdev
specific API.
Tracked-On: #3241
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Rename vbdf to bdf for the following reasons:
Use the same coding style as struct pci_pdev, as pci_pdev uses bdf instead of pbdf
pci_vdev implies the its bdf is virtual, no need to prefix bdf with the v
prefix (redundant)
Tracked-On: #3241
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
