As vector re-mapping is enabled for pre-launched/partition mode VMs,
there is no more need for separate interrupt routine i.e.
partition_mode_dispatch_interrupt.
Tracked-On: #2879
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
This patch unifies the bsp interface between UEFI and SBL.
Tracked-On: #2708
Signed-off-by: Tw <wei.tan@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
1. in UEFI bsp code, not need UEFI macro; it is controlled in makefile.
2. in vm/acpi/interrupt code, unify the API name for SBL & UEFI.
3. remove unnecessary header including and unused code.
Tracked-On: #1842
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
This adds few functions to access the daata structures
defined inside ioapic.c. Removes the same data structures
from ioapic.h
Also this modifies some of the names of existing APIs to
conform to the ioapic module name.
Modified gsi_table identifier to gs_table_data, to avoid
a MISRA C Violation.
Tracked-On: #1842
Signed-off-by: Arindam Roy <arindam.roy@intel.com>
This commit fixed following violations:
- Procedure has more than one exit point: free_irq_vector/request_irq/dispatch_interrupt
- goto detected: dispatch_interrupt
- Pointer param should be declared pointer to const: fixup_idt
- basic type declaration used: fixup_idt
Tracked-On: #861
Signed-off-by: Yan, Like <like.yan@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
we will not enable interrupt until interrupt_init, so we can defer idt
fixup and lidt to interrupt_init.
Tracked-On: #1842
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The function not used in extern c file, must add static.
Tracked-On: #861
Signed-off-by: Huihuang Shi <huihuang.shi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Boot component prepares the very basic platform boot env. It finally call
into platform initilization entries:
- bsp_boot_init & cpu_secondary_init for start up
- or restore_s3_context for wakeup
this patch moves set_idt from header file to irq.c
Tracked-On: #1842
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
IEC 61508,ISO 26262 standards highly recommend single-exit rule.
Reduce the count of the "return entries".
Fix the violations which is comply with the cases list below:
1.Function has 2 return entries.
2.The first return entry is used to return the error code of
checking variable whether is valid.
Fix the violations in "if else" format.
Tracked-On: #861
Signed-off-by: Huihuang Shi <huihuang.shi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
fix the following integer violations:
1. Signed/unsigned conversion without cast
2. Literal value requires a U suffix
3. Implicit conversion of underlying type
v3 -> v4:
* change the type of npk_loglevel/mem_loglevel/console_loglevel
from uint32_t to uint16_t
v2 -> v3:
* discard the return value of update_ept
* discard changes related to npk loglevel
v1 -> v2:
* remove the unnecessary changes related to the false positive
issues caused by scanning tool
* change the type of the local variable 'vlapic_id' from uint8_t
to uint32_t in function 'vlapic_build_id'
* change the type of the struct member 'flags' in shared_buf from
uint64_t to uint32_t
Tracked-On: #861
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
For data structure types "struct vcpu", its name is identical
with variable name in the same scope. This is a MISRA C violation.
Naming convention rule:If the data structure type is used by multi
modules, its corresponding logic resource is exposed to external
components (such as SOS, UOS), and its name meaning is simplistic
(such as vcpu, vm), its name needs prefix "acrn_".
The following udpates are made:
struct vcpu *vcpu-->struct acrn_vcpu *vcpu
Tracked-On: #861
Signed-off-by: Xiangyang Wu <xiangyang.wu@linux.intel.com>
add size check for other hypervisor console command;
they could be overflow for shell log buffer output.
Tracked-On: #1587
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
irq.c/.h:
Added new variables(ctx_rflags, ctx_rip, ctx_cs) in irq_desc
On each interrupt this information is populated
Added api's to access the irq_desc members
profiling.c:
profiling_pmi_handler:On each PMI generates gets the context and other information that caused it
Tracked-On: projectacrn#1409
Acked-by: Eddie Dong <eddie.dong@intel.com>
Signed-off-by: Chinthapally, Manisha <manisha.chinthapally@intel.com>
This patch adds support to sep/socwatch profiling
Adds 2 new files include/arch/x86/profiling.h and arch/x86/profiling.c
which contains most of the implementation for profiling,most of the functions
in profiling.c have dummy implementation and will be implemented in next patches
a. cpu.c, Initial profiling setup is done as part of bsp_boot_post
and cpu_secondary_post flow
b. vmcall.c, New ioctl is added for performing profiling related
operations in vmcall_vmexit_handler
ioctl - HC_PROFILING_OPS
function - hcall_profiling_ops()
c. common/hypercall.c, hcall_profiling_ops() implementation.
d. hv_main.c, In vcpu_thread calling profiling related functions
to save vm context
e. acrn_hv_defs.h, list all the profiling command types
Tracked-On: projectacrn#1409
Acked-by: Eddie Dong <eddie.dong@intel.com>
Signed-off-by: Chinthapally, Manisha <manisha.chinthapally@intel.com>
Fix violations for function whose parameter can be read-only.
Tracked-On: #861
Signed-off-by: Huihuang Shi <huihuang.shi@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
All the platforms supported by ACRN supports x2APIC. So enabled
x2APIC for ACRN hv. Removed any code that is needed for xAPIC mode
of operation.
Tracked-On: #1455
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
Reviewed by: Yonghua Huang <yonghua.huang@intel.com>
Return value should be checked,fix it by add
"void" when the function return value is not used.
V1->V2:
replace printf with pr_warn.
V2->V3:
change the commit to make read easily.
Tracked-On:#861
Signed-off-by: Huihuang Shi <huihuang.shi@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
to enable APICv Posted interrupt supported, following the
specifications defined in Intel SDM Section #29.6, Volume3.
Posted-interrupt processing is a feature by which a processor
processes the virtual interrupts by recording them as pending
on the virtual-APIC page.
Injecting interrupts to VCPU from remote CPU without causing
VM exit on the destination, following steps in SDM Section 29.6,volume3:
Tracked-On: #1447
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The patch is replace irq_static_mappings type from 2 dimension array
into structure and one dimension array.
Tracked-On: #1375
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Reviewed-by: Jason Chen <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The printf related functions have been called by other various
functions, e.g. get_ptdev_info(), get_ioapic_info, etc. The patch
is used to clear up the usage.
Tracked-On: #861
Signed-off-by: Junjun Shan <junjun.shan@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Current free_irq sequence will release vector first, then use the
released vector to free irq number.It will cause irq leak for MSI IRQ.
At present, there is no one to free the irqs which in irq_static_mappings,
So this patch will only make sure free non-gsi irqs.
Tracked-On: #1359
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Convert GSI_MASK_IRQ and GSI_UNMASK_IRQ to inline functions.
v1 -> v2:
After changing GSI_MASK_IRQ and GSI_UNMASK_IRQ from MACROs to functions,
'gsi_(mask|unmask)_irq' are the exposed APIs and 'irq_gsi_mask_unmask'
becomes internal.
In order to reflect this change,
- change 'irq_gsi_mask_unmask' as internal function in ioapic.c
- declare 'gsi_(mask|unmask)_irq' in ioapic.h
- define 'gsi_(mask|unmask)_irq' in ioapic.c
Tracked-On: #861
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
Logically, out-of-range access won't happen at these places. However, it
depends on the behaviour of other codes.
This commit makes changes to explicitly eliminate the possibility in these
functions.
Tracked-On: #1235
Signed-off-by: Yan, Like <like.yan@intel.com>
MISRAC has requirement about implict conversion: actual to formal
param. This patch is used to fix part of these violations.
1.Add a new structure seg_desc_vmcs to hold the VMCS field address of
segment selector to clean up seg_desc structure.
2.Add the definition of maximum MSI entry and the relevant judgement.
3.The violations in shell.c, logmsg.c will be fixed in other series of
patches with modification of function snprintf(), vsnprintf() and other
related usages.
v1->v2:
*Move the definition of struct seg_desc_vmcs from instr_emul.h to
instr_emul.c.
*Modify the formal parameter type in function definition from uint8_t
to char instead of using cast.
*Drop the const declaration for char data in formal parameter.
v2->v3:
*update the data missing conversion.
*change type of internal parameter len to avoid casting in npklog.c.
*change the conversion from signed char to unsigned int in
uart16550_getc() to solve sign-extension.
Tracked-On: #861
Signed-off-by: Junjun Shan <junjun.shan@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This commit replaces the "used" field of irq_desc with a bitmap to maintain
the irq use status to save memory and LOC, and improve the efficiency as well.
Signed-off-by: Yan, Like <like.yan@intel.com>
Reviewed-by: Li, Fei1 <fei1.li@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Fix the parameter type mismatch between API declaration and definition.
Tracked-On: #861
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
This commit changes the order of functions in arch/x86/irq.c, and internal
function names to make it looks cleaner, with no change within any function.
Signed-off-by: Yan, Like <like.yan@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
There are several similar irq handlers with confusing function names and it's
not friendly to call update_irq_handler() to update a proper handler after
request_irq().
With this commit, a single generic irq handler is being used, in which, no lock
need to be acquired because our design could guarantee there is no concurrent
irq handling and irq handler request/free.
A flags field is added to irq_desc struct to select the proper processing flow
for an irq. Irqflags is defined as follows:
IRQF_NONE (0U)
IRQF_LEVEL (1U << 1U) /* 1: level trigger; 0: edge trigger */
IRQF_PT (1U << 2U) /* 1: for passthrough dev */
Because we have only one irq handler, update_irq_handler() should be replace by
set_irq_trigger_mode(), whichs set trigger mode flag of a certian irq.
Accordingly, the code where called update_irq_handler() need to be updated.
Signed-off-by: Yan, Like <like.yan@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
This commit refactors vector allocation/free codes, two functions are
defined to help alloc/free vectors for an irq:
- uint32_t alloc_irq_vector(uint32_t irq)
- alloc a free vector (0x20 ~ 0xDF), and bind it to irq, for legacy irqs
and static mapped irqs, vector has been allocated and bind, so just
check the mapping correctness;
- return: valid vector on success, VECTOR_INVALID on failure.
- void free_irq_vector(uint32_t irq)
- free vector allocated via alloc_irq_vector(), for legacy irqs and static
mapped irqs, nothing need to do.
Signed-off-by: Yan, Like <like.yan@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
This commit refactors the alloc/free irq num, two functions are defined:
- uint32_t alloc_irq_num(uint32_t irq)
- if irq is valid, mark the irq_desc as used; if it's IRQ_INVALID,
alloc a free irq, or else do nothing;
- return: irq num on success, or IRQ_INVALID on failure.
- void free_irq_num(uint32_t irq)
- free the irq num allocated via alloc_irq_num();
And a global spinlock to protect it from concurrent allocation/free.
Signed-off-by: Yan, Like <like.yan@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
This commit cleans up fiels of struct irq_desc:
- remove name, irq_desc_state, irq_cnt and irq_lost_cnt which are not used.
- remove irq_ prefix of irq_lock field of struct irq_desc;
- change enum irq_state to enum irq_use_state;
Signed-off-by: Yan, Like <like.yan@intel.com>
Reviewed-by: Li, Fei <fei1.li@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
This commit cleans up the irq APIs which are a bit confusing.
- pri_register_handler(), normal_register_handler() and
common_register_handler() into request_irq(), and removed
the unnecessary struct irq_request_info;
- rename the unregister_common_handler() to free_irq();
After the revision, the common irq APIs becomes:
- int32_t request_irq(uint32_t irq,
irq_action_t action_fn,
void *action_data,
const char *name)
- void free_irq(uint32_t irq)
Signed-off-by: Yan, Like <like.yan@intel.com>
Reviewed-by: Li, Fei1 <fei1.li@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Since vector is x86 specific concept, we'd like to hide it from common irq APIs.
This commit
- adds static irq:vector mappings for special interrupt such as timer
and cpu notification;
- reserves the irq and vector at initialization;
- removed the vector argument in pri_register_handler(), get reserved vector
from irq_desc in common_register_handler().
Signed-off-by: Yan, Like <like.yan@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Since we don't support shared irq, dev_handler_node which works as action node,
is not needed anymore.
This commit removes the dev_handler_node struct and does some relevant changes,
including:
- moves necessary fields to struct irq_desc: action, priv_data, name; and
removes unused handler_data;
- changes return type of pri_/normal_register_handler() from dev_handler_node*
to int32_t, which is irq num (>= 0) on success, and errno (> 0) on failure.
- changes unregister_irq_handler() to take argument unint32_t instead of
dev_handler_node*;
- changes are made to the places where these APIs are called.
Signed-off-by: Yan, Like <like.yan@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
Because multiple physical devices sharing a single physical pin would be
assigned to a same VM, so UOS could handle the irq sharing. So that we could
remove the physical irq sharing support in HV.
This commit removes the irq sharing support, changes including:
- removed the dev_list field in irq_desc, and clean up codes for the list
operation;
- replace IRQ_ASSIGNED_SHARED and IRQ_ASSIGNED_NOSHARE with IRQ_ASSIGNED;
- remove argument indicating irq is shared;
- revise irq request flow for pt devices to remove dependency on irq sharing:
register irq on adding remapping entery and unregister irq on removal an
entry, and do not register/unregister at remapping an entry.
Signed-off-by: Yan, Like <like.yan@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
The bracket is required when the level of precedence of
the operators is less than 13. Add the bracket to logical
conjunctions. The commit applys the rule to the files under
Signed-off-by: Yang, Yu-chu <yu-chu.yang@intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
ACRN in partition mode does not have vector and APIC ID remapping for
device interrupts. Only MSIs are supported. No IOAPIC and legacy interrupts
for the VMs in ACRN partition mode.
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
It's not necessary to specify priority for dynamic allocated vector, because
nested irq is not supported on HV, and irq of any priority would cause VM exit.
This commit makes the following changes:
- remove the argument indicating priority in struct irq_request_info and
following functions:
ptdev_activate_entry()
find_available_vector()
irq_desc_alloc_vector()
normal_register_handler()
- change the macro of vector ranges:
VECTOR_DYNAMIC_START/END for dynamically allocable vectors;
VECTOR_FIXED_START/END for fixed allocated vectors, such as vector for
timer etc.
Signed-off-by: Yan, Like <like.yan@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
In order to comply with MISRA C rules, renamed vairables
and function names starting with "_".
The major changes invloves mostly static function
names, as they are being called inside the same file
by a wrapper function.
Signed-off-by: Arindam Roy <arindam.roy@intel.com>
1. add register_softirq to register a softirq handler
2. rename exec_softirq to do_softirq; raise_softirq to fire_softirq.
3. in do_softirq call registered softirq handler not call
the device softirq handle function directly
4. enable irq after vm exit and disable irq after the first
call do_softirq before vm enter.
5. call do_softirq again when irq disabled to handle the risk
unhandled softirq.
6. rename SOFTIRQ_DEV_ASSIGN to SOFTIRQ_PTDEV
7. remove SOFTIRQ_ATOMIC
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
