The coding guideline rule C-FN-16 requires that 'Mixed-use of
C code and assembly code in a single function shall not be allowed',
this patch wraps inline assembly to inline functions.
Tracked-On: #6776
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
v1-->v2:
use inline functions for read/write XMM registers
This patch adds an option CONFIG_KEEP_IRQ_DISABLED to hv (default n) and
config-tool so that when this option is 'y', all interrupts in hv root
mode will be permanently disabled.
With this option to be 'y', all interrupts received in root mode will be
handled in external interrupt vmexit after next VM entry. The postpone
latency is negligible. This new configuration is a requirement from x86
TEE's secure/non-secure interrupt flow support. Many race conditions can be
avoided when keeping IRQ off.
v5:
Rename CONFIG_ACRN_KEEP_IRQ_DISABLED to CONFIG_KEEP_IRQ_DISABLED
v4:
Change CPU_IRQ_ENABLE/DISABLE to
CPU_IRQ_ENABLE_ON_CONFIG/DISABLE_ON_CONFIG and guard them using
CONFIG_ACRN_KEEP_IRQ_DISABLED
v3:
CONFIG_ACRN_DISABLE_INTERRUPT -> CONFIG_ACRN_KEEP_IRQ_DISABLED
Add more comment in commit message
Tracked-On: #6571
Signed-off-by: Yifan Liu <yifan1.liu@intel.com>
Reviewed-by: Wang, Yu1 <yu1.wang@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
"idle=halt " should be avoided in REE since we have to
keep the interrupt always masked in root mode.
Tracked-On: #6571
Signed-off-by: Jie Deng <jie.deng@intel.com>
Reviewed-by: Wang, Yu1 <yu1.wang@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
The TEE_NOTIFICATION_VECTOR can sometimes be confused with TEE's PI
notification vector. So rename it to TEE_FIXED_NONSECURE_VECTOR for
better readability.
No logic change.
v3:
Add more comments in commit message.
Tracked-On: #6571
Signed-off-by: Yifan Liu <yifan1.liu@intel.com>
Reviewed-by: Wang, Yu1 <yu1.wang@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Sometimes HV would like to know if there are specific interrupt
pending in vIRR, and clears them if necessary (such as in x86_tee case).
This patch adds two APIs: get_next_pending_intr and clear_pending_intr.
This patch also moves the inline api prio() from
vlapic.c to vlapic.h
v3:
Remove apicv_get_next_pending_intr and apicv_clear_pending_intr
and use vlapic_get_next_pending_intr and vlapic_clear_pending_intr
directly.
v2:
get_pending_intr -> get_next_pending_intr
apicv_basic/advanced_clear_pending_intr -> apicv_clear_pending_intr
apicv_basic/advanced_get_pending_intr -> apicv_get_next_pending_intr
has_pending_intr kept
Tracked-On: #6571
Signed-off-by: Yifan Liu <yifan1.liu@intel.com>
Reviewed-by: Wang, Yu1 <yu1.wang@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
This patch wraps the check of GUEST_FLAG_TEE/REE into functions
is_tee_vm/is_ree_vm for readability. No logic changes.
Tracked-On: #6571
Signed-off-by: Yifan Liu <yifan1.liu@intel.com>
Reviewed-by: Wang, Yu1 <yu1.wang@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
This patch introduces stateful VM which represents a VM that has its own
internal state such as a file cache, and adds a check before system
shutdown to make sure that stateless VM does not block system shutdown.
Tracked-On: #6571
Signed-off-by: Wang Yu <yu1.wang@intel.com>
Signed-off-by: Yifan Liu <yifan1.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Currently the MACRO(DM_OWNED_GUEST_FLAG_MASK) is generated
by config-tool. It's unnecessary to generate by tool since
it is fixed, the config-tool will remove this MACRO and
move it to vm_config.h
Tracked-On: #6366
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
Variable should not have a prefix of '_' per MISRA C standard. The patch
removes the prefix for _ld_ram_start and _ld_ram_end.
Tracked-On: #6885
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
In previous commit df7ffab441
the CONFIG_HV_RAM_SIZE was removed and the hv_ram_size was calculated in
link script by following formula:
ld_ram_size = _ld_ram_end - _ld_ram_start ;
but _ld_ram_start is a relative address in boot section whereas _ld_ram_end
is a absolute address in global, the mix operation cause hv_ram_size is
incorrect when HV binary is relocated.
The patch fix this issue by getting _ld_ram_start and _ld_ram_end respectively
and calculated at runtime.
Tracked-On: #6885
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Secure interrupt (interrupt belongs to TEE) comes
when TEE vcpu is running, the interrupt will be
injected to TEE directly. But when REE vcpu is running
at that time, we need to switch to TEE for handling.
Non-Secure interrupt (interrupt belongs to REE) comes
when REE vcpu is running, the interrupt will be injected
to REE directly. But when TEE vcpu is running at that time,
we need to inject a predefined vector to TEE for notification
and continue to switch back to TEE for running.
To sum up, when secure interrupt comes, switch to TEE
immediately regardless of whether REE is running or not;
when non-Secure interrupt comes and TEE is running,
just notify the TEE and keep it running, TEE will switch
to REE on its own initiative after completing its work.
Tracked-On: projectacrn#6571
Signed-off-by: Jie Deng <jie.deng@intel.com>
Reviewed-by: Wang, Yu1 <yu1.wang@intel.com>
Acked-by: Eddie Dong <eddie.dong@Intel.com>
This patch implements the following x86_tee hypercalls,
- HC_TEE_VCPU_BOOT_DONE
- HC_SWITCH_EE
Tracked-On: #6571
Signed-off-by: Jie Deng <jie.deng@intel.com>
Reviewed-by: Wang, Yu1 <yu1.wang@intel.com>
Acked-by: Eddie Dong <eddie.dong@Intel.com>
This patch adds the x86_tee hypercall interfaces.
- HC_TEE_VCPU_BOOT_DONE
This hypercall is used to notify the hypervisor that the TEE VCPU Boot
is done, so that we can sleep the corresponding TEE VCPU. REE will be
started at the last time this hypercall is called by TEE.
- HC_SWITCH_EE
For REE VM, it uses this hypercall to request TEE service.
For TEE VM, it uses this hypercall to switch back to REE
when it completes the REE service.
Tracked-On: #6571
Signed-off-by: Jie Deng <jie.deng@intel.com>
Reviewed-by: Wang, Yu1 <yu1.wang@intel.com>
Acked-by: Eddie Dong <eddie.dong@Intel.com>
TEE is a secure VM which has its own partitioned resources while
REE is a normal VM which owns the rest of platform resources.
The TEE, as a secure world, it can see the memory of the REE
VM, also known as normal world, but not the other way around.
But please note, TEE and REE can only see their own devices.
So this patch does the following things:
1. go through physical e820 table, to ept add all system memory entries.
2. remove hv owned memory.
Tracked-On: #6571
Signed-off-by: Jie Deng <jie.deng@intel.com>
Reviewed-by: Wang, Yu1 <yu1.wang@intel.com>
Acked-by: Eddie Dong <eddie.dong@Intel.com>
Given an e820, this API creates an identical memmap for specified
e820 memory type, EPT memory cache type and access right.
Tracked-On: #6571
Signed-off-by: Jie Deng <jie.deng@intel.com>
Reviewed-by: Wang, Yu1 <yu1.wang@intel.com>
Acked-by: Eddie Dong <eddie.dong@Intel.com>
Add a configuration to support companion VM.
Tracked-On: #6571
Signed-off-by: Jie Deng <jie.deng@intel.com>
Reviewed-by: Wang, Yu1 <yu1.wang@intel.com>
Since the UUID is not a *must* set parameter for the standard post-launched
VM which doesn't depend on any static VM configuration. We can remove
the KATA related code from hypervisor as it belongs to such VM type.
v2-->v3:
separate the struce acrn_platform_info change of devicemodel
v1-->v2:
update the subject and commit msg
Tracked-On:#6685
Signed-off-by: Chenli Wei <chenli.wei@intel.com>
Reviewed-by: Wang, Yu1 <yu1.wang@intel.com>
With current arch design the UUID is used to identify ACRN VMs,
all VM configurations must be deployed with given UUIDs at build time.
For post-launched VMs, end user must use UUID as acrn-dm parameter
to launch specified user VM. This is not friendly for end users
that they have to look up the pre-configured UUID before launching VM,
and then can only launch the VM which its UUID in the pre-configured UUID
list,otherwise the launch will fail.Another side, VM name is much straight
forward for end user to identify VMs, whereas the VM name defined
in launch script has not been passed to hypervisor VM configuration
so it is not consistent with the VM name when user list VM
in hypervisor shell, this would confuse user a lot.
This patch will resolve these issues by removing UUID as VM identifier
and use VM name instead:
1. Hypervisor will check the VM name duplication during VM creation time
to make sure the VM name is unique.
2. If the VM name passed from acrn-dm matches one of pre-configured
VM configurations, the corresponding VM will be launched,
we call it static configured VM.
If there is no matching found, hypervisor will try to allocate one
unused VM configuration slot for this VM with given VM name and get it
run if VM number does not reach CONFIG_MAX_VM_NUM,
we will call it dynamic configured VM.
3. For dynamic configured VMs, we need a guest flag to identify them
because the VM configuration need to be destroyed
when it is shutdown or creation failed.
v7->v8:
-- rename is_static_vm_configured to is_static_configured_vm
-- only set DM owned guest_flags in hcall_create_vm
-- add check dynamic flag in get_unused_vmid
v6->v7:
-- refine get_vmid_by_name, return the first matching vm_id
-- the GUEST_FLAG_STATIC_VM is added to identify the static or
dynamic VM, the offline tool will set this flag for
all the pre-defined VMs.
-- only clear name field for dynamic VM instead of clear entire
vm_config
Tracked-On: #6685
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Reviewed-by: Victor Sun<victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The CONFIG_MAX_IR_ENTRIES and CONFIG_MAX_PT_IRQ_ENTRIES are separate
configuration items, and they can be configured through configuration tool
When the number of PT irq entries are more than IR entries, then some
passthrough devices' irqs may failed to be protected by interrupt
remapping or automatically injected by post-interrupt mechanism.
And it waste memory if the CONFIG_MAX_IR_ENTRIES is larger.
This patch replace the CONFIG_MAX_IR_ENTRIES to MAX_IR_ENTRIES and
enforce it align to CONFIG_PT_IRQ_ENTRIES and round up to > 2^n as the
IRTA_REG spec.This way can enforce all PT irqs works with IR or PI
mechanism.
Tracked-On: #6745
Signed-off-by: Chenli Wei <chenli.wei@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Reviewed-by: Wang, Yu1 <yu1.wang@intel.com>
Commit cbf3825 "hv: Pass-through IA32_TSC_AUX MSR to L1 guest"
lets guest own the physical MSR IA32_TSC_AUX and does not handle this MSR
in the hypervisor.
If multiple vCPUs share the same pCPU, when one vCPU reads MSR IA32_TSC_AUX,
it may get the value set by other vCPUs.
To fix this issue, this patch does:
- initialize the MSR content to 0 for the given vCPU, which is consistent with
the value specified in SDM Vol3 "Table 9-1. IA-32 and Intel 64 Processor
States Following Power-up, Reset, or INIT"
- save/restore the MSR content for the given vCPU during context switch
v1 -> v2:
* According to Table 9-1, the content of IA32_TSC_AUX MSR is unchanged
following INIT, v2 updates the initialization logic so that the content for
vCPU is consistent with SDM.
Tracked-On: #6799
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Reviewed-by: Zide Chen <zide.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This patch moves the ssram area in ve820 tab, and reunites the
hpa1_low_part1/2 areas. The ve820 building code is refined.
before:
|<---low_1M--->|
|<---hpa1_low_part1--->|
|<---SSRAM--->|
|<---hpa1_low_part2--->|
|<---GPU_OpRegion--->|
|<---ACPI DATA--->|
|<---ACPI NVS--->|
---2G---
after:
|<---low_1M--->|
|<---hpa_low--->|
|<---SSRAM--->|
|<---GPU_OpRegion--->|
|<---ACPI DATA--->|
|<---ACPI NVS--->|
---2G---
The SSRAM area's address is described in the ACPI's RTCT/PTCT
table. To simplify the SSRAM implementation, SSRAM area was
identical mapped to GPA, and resulted in the divition of hpa_low.
Then the ve820 building logic became too complicated.
Now we managed to edit the guest's RTCT/PTCT table by offline
tools in the former patch, so we can move the guest's SSRAM
area, and reunite the hpa_low areas again.
After doing this, this patch rewrites the ve820 building code
in a much simpler way.
Tracked-On: #6674
Signed-off-by: Zhou, Wu <wu.zhou@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
Reviewed-by: Wang, Yu1 <yu1.wang@intel.com>
The coding guideline rules C-TY-27 and C-TY-28, combined, requires that
assignment and arithmetic operations shall be applied only on operands of the
same kind. This patch either adds explicit type casts or adjust types of
variables to align the types of operands.
The only semantic change introduced by this patch is the promotion of the
second argument of set_vmcs_bit() and clear_vmcs_bit() to
uint64_t (formerly uint32_t). This avoids clear_vmcs_bit() to accidentally
clears the upper 32 bits of the requested VMCS field.
Other than that, this patch has no semantic change. Specifically this patch
is not meant to fix buggy narrowing operations, only to make these
operations explicit.
Tracked-On: #6776
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The coding guideline rule C-TY-12 requires that 'all type conversions shall
be explicit'. Especially implicit cases on the signedness of variables
shall be avoided.
This patch either adds explicit type casts or adjust local variable types
to make sure that Booleans, signed and unsigned integers are not used
mixedly.
This patch has no semantic changes.
Tracked-On: #6776
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The coding guideline rule C-PP-04 requires that 'parentheses shall be used
when referencing a MACRO parameter'. This patch adds parentheses to macro
parameters or expressions that are not yet wrapped properly.
This patch has no sematic impact.
Tracked-On: #6776
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The coding guideline gule C-FN-09 requires that 'the formal parameter name
of a function shall be consistent'. This patch fixes two places where the
formal parameters are named differently in declarations and
definitions. More specifically, the names in declarations are replaced with
those in definitions.
This patch has no semantic impact.
Tracked-On: #6776
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
In lock instruction emulation, we use vcpu_make_request and
signal_event pairs to shoot down/release other vcpus.
However, vcpu_make_request is async and does not guarantee an execution
of wait_event on target vcpu, and we want wait_event to be consistent
with signal_event.
Consider following scenarios:
1, When target vcpu's state has not yet turned to VCPU_RUNNING,
vcpu_make_request on ACRN_REQUEST_SPLIT_LOCK does not make sense, and will
not result in wait_event.
2, When target vcpu is already requested on ACRN_REQUEST_SPLIT_LOCK (i.e., the
corresponding bit in pending_req is set) but not yet handled,
the vcpu_make_request call does not result in wait_event as 1 bit is not
enough to cache multiple requests.
This patch tries to add checks in vcpu_kick_lock_instr_emulation and
vcpu_complete_lock_instr_emulation to resolve these issues.
Tracked-On: #6502
Signed-off-by: Yifan Liu <yifan1.liu@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Rename SOS_VM type to SERVICE_VM
rename UOS to User VM in XML description
rename uos_thread_pid to user_vm_thread_pid
rename devname_uos to devname_user_vm
rename uosid to user_vmid
rename UOS_ACK to USER_VM_ACK
rename SOS_VM_CONFIG_CPU_AFFINITY to SERVICE_VM_CONFIG_CPU_AFFINITY
rename SOS_COM to SERVICE_VM_COM
rename SOS_UART1_VALID_NUM" to SERVICE_VM_UART1_VALID_NUM
rename SOS_BOOTARGS_DIFF to SERVICE_VM_BOOTARGS_DIFF
rename uos to user_vm in launch script and xml
Tracked-On: #6744
Signed-off-by: Liu Long <long.liu@linux.intel.com>
Reviewed-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
Rename SOS_VM_NUM to SERVICE_VM_NUM.
rename SOS_SOCKET_PORT to SERVICE_VM_SOCKET_PORT.
rename PROCESS_RUN_IN_SOS to PROCESS_RUN_IN_SERVICE_VM.
rename PCI_DEV_TYPE_SOSEMUL to PCI_DEV_TYPE_SERVICE_VM_EMUL.
rename SHUTDOWN_REQ_FROM_SOS to SHUTDOWN_REQ_FROM_SERVICE_VM.
rename PROCESS_RUN_IN_SOS to PROCESS_RUN_IN_SERVICE_VM.
rename SHUTDOWN_REQ_FROM_UOS to SHUTDOWN_REQ_FROM_USER_VM.
rename UOS_SOCKET_PORT to USER_VM_SOCKET_PORT.
rename SOS_CONSOLE to SERVICE_VM_OS_CONSOLE.
rename SOS_LCS_SOCK to SERVICE_VM_LCS_SOCK.
rename SOS_VM_BOOTARGS to SERVICE_VM_OS_BOOTARGS.
rename SOS_ROOTFS to SERVICE_VM_ROOTFS.
rename SOS_IDLE to SERVICE_VM_IDLE.
rename SEVERITY_SOS to SEVERITY_SERVICE_VM.
rename SOS_VM_UUID to SERVICE_VM_UUID.
rename SOS_REQ to SERVICE_VM_REQ.
rename RTCT_NATIVE_FILE_PATH_IN_SOS to RTCT_NATIVE_FILE_PATH_IN_SERVICE_VM.
rename CBC_REQ_T_UOS_ACTIVE to CBC_REQ_T_USER_VM_ACTIVE.
rename CBC_REQ_T_UOS_INACTIVE to CBC_REQ_T_USER_VM_INACTIV.
rename uos_active to user_vm_active.
Tracked-On: #6744
Signed-off-by: Liu Long <long.liu@linux.intel.com>
Reviewed-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
Rename gpa_uos to gpa_user_vm
rename base_gpa_in_uos to base_gpa_in_user_vm
rename UOS_VIRT_PCI_MMCFG_BASE to USER_VM_VIRT_PCI_MMCFG_BASE
rename UOS_VIRT_PCI_MMCFG_START_BUS to USER_VM_VIRT_PCI_MMCFG_START_BUS
rename UOS_VIRT_PCI_MMCFG_END_BUS to USER_VM_VIRT_PCI_MMCFG_END_BUS
rename UOS_VIRT_PCI_MEMBASE32 to USER_VM_VIRT_PCI_MEMBASE32
rename UOS_VIRT_PCI_MEMLIMIT32 to USER_VM_VIRT_PCI_MEMLIMIT32
rename UOS_VIRT_PCI_MEMBASE64 to USER_VM_VIRT_PCI_MEMBASE64
rename UOS_VIRT_PCI_MEMLIMIT64 to USER_VM_VIRT_PCI_MEMLIMIT64
rename UOS in comments message to User VM.
Tracked-On: #6744
Signed-off-by: Liu Long <long.liu@linux.intel.com>
Reviewed-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
Rename sos_vm to service_vm.
rename sos_vmid to service_vmid.
rename sos_vm_ptr to service_vm_ptr.
rename get_sos_vm to get_service_vm.
rename sos_vm_gpa to service_vm_gpa.
rename sos_vm_e820 to service_vm_e820.
rename sos_efi_info to service_vm_efi_info.
rename sos_vm_config to service_vm_config.
rename sos_vm_hpa2gpa to service_vm_hpa2gpa.
rename vdev_in_sos to vdev_in_service_vm.
rename create_sos_vm_e820 to create_service_vm_e820.
rename sos_high64_max_ram to service_vm_high64_max_ram.
rename prepare_sos_vm_memmap to prepare_service_vm_memmap.
rename post_uos_sworld_memory to post_user_vm_sworld_memory
rename hcall_sos_offline_cpu to hcall_service_vm_offline_cpu.
rename filter_mem_from_sos_e820 to filter_mem_from_service_vm_e820.
rename create_sos_vm_efi_mmap_desc to create_service_vm_efi_mmap_desc.
rename HC_SOS_OFFLINE_CPU to HC_SERVICE_VM_OFFLINE_CPU.
rename SOS to Service VM in comments message.
Tracked-On: #6744
Signed-off-by: Liu Long <long.liu@linux.intel.com>
Reviewed-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
Implement the write_vcbm() function to handle the
MSR_IA32_type_MASK_n vCBM MSRs write request
Call write_vclosid() to handle MSR_IA32_PQR_ASSOC MSR write request
Several vCAT P2V (physical to virtual) and V2P (virtual to physical)
mappings exist:
struct acrn_vm_config *vm_config = get_vm_config(vm_id)
max_pcbm = vm_config->max_type_pcbm (type: l2 or l3)
mask_shift = ffs64(max_pcbm)
vclosid = vmsr - MSR_IA32_type_MASK_0
pclosid = vm_config->pclosids[vclosid]
pmsr = MSR_IA32_type_MASK_0 + pclosid
pcbm = vcbm << mask_shift
vcbm = pcbm >> mask_shift
Where
MSR_IA32_type_MASK_n: L2 or L3 mask msr address for CLOSIDn, from
0C90H through 0D8FH (inclusive).
max_pcbm: a bitmask that selects all the physical cache ways assigned to the VM
vclosid: virtual CLOSID, always starts from 0
pclosid: corresponding physical CLOSID for a given vclosid
vmsr: virtual msr address, passed to vCAT handlers by the
caller functions rdmsr_vmexit_handler()/wrmsr_vmexit_handler()
pmsr: physical msr address
vcbm: virtual CBM, passed to vCAT handlers by the
caller functions rdmsr_vmexit_handler()/wrmsr_vmexit_handler()
pcbm: physical CBM
Tracked-On: #5917
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Acked-by: Eddie Dong <eddie.dong@Intel.com>
Implement the read_vcbm() and read_vclosid() functions to handle the MSR_IA32_PQR_ASSOC
and MSR_IA32_type_MASK_n vCAT MSRs read request.
Tracked-On: #5917
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Acked-by: Eddie Dong <eddie.dong@Intel.com>
Expose CAT feature to vCAT VM by reporting the number of
cache ways/CLOSIDs via the 04H/10H cpuid instructions, so that the
VM can take advantage of CAT to prioritize and partition cache
resource for its own tasks.
Add the vcat_pcbm_to_vcbm() function to map pcbm to vcbm
Tracked-On: #5917
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Acked-by: Eddie Dong <eddie.dong@Intel.com>
Initialize vCBM MSRs
Initialize vCLOSID MSR
Add some vCAT functions:
Retrieve max_vcbm and max_pcbm
Check if vCAT is configured or not for the VM
Map vclosid to pclosid
write_vclosid: vCLOSID MSR write handler
write_vcbm: vCBM MSR write handler
Tracked-On: #5917
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Acked-by: Eddie Dong <eddie.dong@Intel.com>
Initialize the emulated_guest_msrs[] array at runtime for
MSR_IA32_type_MASK_n and MSR_IA32_PQR_ASSOC msrs, there is no good
way to do this initialization statically at build time
Tracked-On: #5917
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
For vCAT, it may need to store more than MAX_VCPUS_PER_VM of closids,
change clos in vm_config.h to a pointer to accommodate this situation
Rename clos to pclosids
pclosids now is a pointer to an array of physical CLOSIDs that is defined
in vm_configurations.c by vmconfig. The number of elements in the array
must be equal to the value given by num_pclosids
Add max_type_pcbm (type: l2 or l3) to struct acrn_vm_config, which stores a bitmask
that selects/covers all the physical cache ways assigned to the VM
Change vmsr.c to accommodate this amended data structure
Change the config-tools to generate vm_configurations.c, and fill in the num_closids
and clos pointers based on the information from the scenario file.
Now vm_configurations.c.xsl generates all the clos related code so remove the same
code from misc_cfg.h.xsl.
Examples:
Scenario file:
<RDT>
<RDT_ENABLED>y</RDT_ENABLED>
<CDP_ENABLED>n</CDP_ENABLED>
<VCAT_ENABLED>y</VCAT_ENABLED>
<CLOS_MASK>0x7ff</CLOS_MASK>
<CLOS_MASK>0x7ff</CLOS_MASK>
<CLOS_MASK>0x7ff</CLOS_MASK>
<CLOS_MASK>0xff800</CLOS_MASK>
<CLOS_MASK>0xff800</CLOS_MASK>
<CLOS_MASK>0xff800</CLOS_MASK>
<CLOS_MASK>0xff800</CLOS_MASK>
<CLOS_MASK>0xff800</CLOS_MASK>
/RDT>
<vm id="0">
<guest_flags>
<guest_flag>GUEST_FLAG_VCAT_ENABLED</guest_flag>
</guest_flags>
<clos>
<vcpu_clos>3</vcpu_clos>
<vcpu_clos>4</vcpu_clos>
<vcpu_clos>5</vcpu_clos>
<vcpu_clos>6</vcpu_clos>
<vcpu_clos>7</vcpu_clos>
</clos>
</vm>
<vm id="1">
<clos>
<vcpu_clos>1</vcpu_clos>
<vcpu_clos>2</vcpu_clos>
</clos>
</vm>
vm_configurations.c (generated by config-tools) with the above vCAT config:
static uint16_t vm0_vcpu_clos[5U] = {3U, 4U, 5U, 6U, 7U};
static uint16_t vm1_vcpu_clos[2U] = {1U, 2U};
struct acrn_vm_config vm_configs[CONFIG_MAX_VM_NUM] = {
{
.guest_flags = (GUEST_FLAG_VCAT_ENABLED),
.pclosids = vm0_vcpu_clos,
.num_pclosids = 5U,
.max_l3_pcbm = 0xff800U,
},
{
.pclosids = vm1_vcpu_clos,
.num_pclosids = 2U,
},
};
Tracked-On: #5917
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
PR #6283 updated code and docs to the new kernel HSM driver. Fix
some references to VHM missed in the doxygen comments. Also fixed some
misspellings while in these files.
Tracked-On: #6282
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
In the current hypervisor, only support at most two legacy vuarts
(COM1 and COM2) for a VM, COM1 is usually configured as VM console,
COM2 is configured as communication channel of S5 feature.
Hypervisor can support MAX_VUART_NUM_PER_VM(8) legacy vuart, but only
register handlers for two legacy vuart since the assumption (legacy
vuart is less than 2) is made.
In the current hypervisor configurtion, io port (2F8H) is always
allocated for virtual COM2, it will be not friendly if user wants to
assign this port to physical COM2.
Legacy vuart is common communication channel between service VM and
user VM, it can work in polling mode and its driver exits in each
guest OS. The channel can be used to send shutdown command to user VM
in S5 featuare, so need to config serval vuarts for service VM and one
vuart for each user VM.
The following changes will be made to support at most
MAX_VUART_NUM_PER_VM legacy vuarts:
- Refine legacy vuarts initialization to register PIO handler for
related vuart.
- Update assumption of legacy vuart number.
BTW, config tools updates about legacy vuarts will be made in other
patch.
v1-->v2:
Update commit message to make this patch's purpose clearer;
If vuart index is valid, register handler for it.
Tracked-On: #6652
Signed-off-by: Xiangyang Wu <xiangyang.wu@intel.com>
Acked-by: Eddie Dong <eddie.dong@Intel.com>
It's difficult to configure CONFIG_HV_RAM_SIZE properly at once. This patch
not only remove CONFIG_HV_RAM_SIZE, but also we use ld linker script to
dynamically get the size of HV RAM size.
Tracked-On: #6663
Signed-off-by: Fei Li <fei1.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This patch changes the size of vvmcs[] array from 1 to
PER_VCPU_ACTIVE_VVMCS_NUM, and actually enables multiple active VMCS12
support in ACRN. The basic operations:
- if L1 VMPTRLDs a VMCS12 without previously VMCLEAR the current
VMCS12, ACRN no longer unconditionally flushes the current VMCS12
back to L1. Instead, it tries to keep both the current and the newly
loaded VMCS12 in the nested->vvmcs[] array, unless:
- if there is no more available vvmcs[] entry, ACRN flushes one active
VMCS12 to make room for this new VMCS12.
Tracked-On: #6289
Signed-off-by: Zide Chen <zide.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This patch adds a new priority based scheduler to support
vCPU scheduling based on their pre-configured priorities.
A vCPU can be running only if there is no higher priority
vCPU running on the same pCPU.
Tracked-On: #6571
Signed-off-by: Jie Deng <jie.deng@intel.com>
Rename the clos_max field in struct rdt_info to num_closids
Rename variable valid_clos_num to common_num_closids and make it static
Tracked-On: #5917
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
These dirty flags are supposed to be per VMCS12, so move them from the
per vCPU acrn_nested struct to the newly added acrn_vvmcs struct.
Tracked-On: #6289
Signed-off-by: Zide Chen <zide.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This variable represents the L1 GPA of the current VMCS12. But it's
no longer needed in the multiple active VMCS12 case, which uses the
following variables for this purpose.
- nested->current_vvmcs refers to the vvmcs[] entry which contains the
cached current VMCS12, its associated VMCS02, and other context info.
- nested->current_vvmcs->vmcs12_gpa refers to the L1 GPA of this
current VMCS12.
Tracked-On: #6289
Signed-off-by: Zide Chen <zide.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Add an array of struct acrn_vvmcs to struct acrn_nested, so it is
possible to cache multiple active VMCS12s.
This patch declares the size of this array to 1, meaning that there is
only one active VMCS12. This is to minimize the logical code changes.
Add pointer current_vvmcs to struct acrn_nested, which refers to the
current vvmcs[] entry. In this patch, if any VMCS12 is active, it
always points to vvmcs[0].
Tracked-On: #6289
Signed-off-by: Zide Chen <zide.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
By changing the way to assign L1 VPID from bottom-up to top-down,
the possibilities for VPID conflicts between L1 and L2 guests are
small.
Then we can flush VPID just in case of conflicting.
Tracked-On: #6289
Signed-off-by: Anthony Xu <anthony.xu@intel.com>
Signed-off-by: Zide Chen <zide.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
In run time, it's rare for L1 to write to the intercepted non host-state
VMCS fields, and using multiple dirty flags is not necessary.
This patch uses one single dirty flag to manage all non host-state VMCS
fields. This helps to simplify current code and in the future we may
not need to declare new dirty flags when we intercept more VMCS fields.
Tracked-On: #5923
Signed-off-by: Zide Chen <zide.chen@intel.com>
is_lapic_pt_enabled() is called at least twice in one loop of the vCPU
thread, and it's called in vmexit_handler() frequently if LAPIC is not
pass-through. Thus the efficiency of this function has direct
impact to the system performance.
Since the LAPIC mode is not changed in run time, we don't have to
calculate it on the fly in is_lapic_pt_enabled().
BTW, removed the unused lapic_mask from struct acrn_vcpu_arch.
Tracked-On: #6289
Signed-off-by: Zide Chen <zide.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Use an unused MSR on host to save ACRN pcpu ID and avoid saving and
restoring TSC AUX MSR on VMX transitions.
Tracked-On: #6289
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Signed-off-by: Zide Chen <zide.chen@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
- remove vcpu->arch.nrexits which is useless.
- record full 32 bits of exit_reason to TRACE_2L(). Make the code simpler.
Tracked-On: #6289
Signed-off-by: Zide Chen <zide.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This helps to improve performance:
- Don't need to execute VMREAD in vcpu_get_efer(), which is frequently
called.
- VMX_EXIT_CTLS_SAVE_EFER can be removed from VM-Exit Controls.
- If the value of IA32_EFER MSR is identical between the host and guest
(highly likely), adjust the VMX controls not to load IA32_EFER on
VMExit and VMEntry.
It's convenient to continue use the exiting vcpu_s/get_efer() APIs,
other than the common vcpu_s/get_guest_msr().
Tracked-On: #6289
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Signed-off-by: Zide Chen <zide.chen@intel.com>
MAXIMUM_PA_WIDTH will be calculated from board information.
Tracked-On: #6357
Signed-off-by: Liang Yi <yi.liang@intel.com>
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
Remove the acpi loading function from elf_loader, rawimage_loaer and
bzimage_loader, and call it together in vm_sw_loader.
Now the vm_sw_loader's job is not just loading sw, so we rename it to
prepare_os_image.
Tracked-On: #6323
Signed-off-by: Zhou, Wu <wu.zhou@intel.com>
Reviewed-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Rename KERNEL_ZEPHYR to KERNEL_RAWIMAGE. Added new type "KERNEL_ELF".
Add CONFIG_GUEST_KERNEL_RAWIMAGE, CONFIG_GUEST_KERNEL_ELF and/or
CONFIG_GUEST_KERNEL_BZIMAGE to config.h if it's configured.
Tracked-On: #6323
Signed-off-by: Yang,Yu-chu <yu-chu.yang@intel.com>
Reviewed-by: Victor Sun <victor.sun@intel.com>
Previously we only support loading raw format of zephyr image as prelaunched
Zephyr VM, this would cause guest F segment overridden issue because the zephyr
raw image covers memory space from 0x1000 to 0x100000 upper. To fix this issue,
we should support ELF format image loading so that parse and load the multiple
segments from ELF image directly.
Tracked-On: #6323
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
ACRN does not support the variable range vMTRR. The default
memory type of vMTRR is UC. With this vMTRR emulation guest VM
such as Linux refuses to map the MMIO address space as WB. In
order to get better performance SHM BAR of ivshmem is mapped
with PAT ignored and memory type of SHM BAR is fixed to WB.
Tracked-On: #6389
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
ACRN could run without XSAVE Capability. So remove XSAVE dependence to support
more (hardware or virtual) platforms.
Tracked-On: #6287
Signed-off-by: Fei Li <fei1.li@intel.com>
When guest kernel has multiple loading segments like ELF format image, just
define one load address in sw_kernel_info struct is meaningless.
The patch removes kernel_load_addr member in struct sw_kernel_info, the load
address should be parsed in each specified format image processing.
Tracked-On: #6323
Signed-off-by: Victor Sun <victor.sun@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Because the emulation code is for both split-lock and uc-lock,
rename splitlock.c/splitlock.h to lock_instr_emul.c/lock_instr_emul.h
Tracked-On: #6299
Signed-off-by: Tao Yuhong <yuhong.tao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Because the emulation code is for both split-lock and uc-lock, Changed
these API names:
vcpu_kick_splitlock_emulation() -> vcpu_kick_lock_instr_emulation()
vcpu_complete_splitlock_emulation() -> vcpu_complete_lock_instr_emulation()
emulate_splitlock() -> emulate_lock_instr()
Tracked-On: #6299
Signed-off-by: Tao Yuhong <yuhong.tao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Split-lock emulation can be re-used for uc-lock. In emulate_splitlock(),
it only work if this vmexit is for #AC trap and guest do not handle
split-lock and HV enable #AC for splitlock.
Add another condition to let emulate_splitlock() also work for #GP trap
and guest do not handle uc-lock and HV enable #GP for uc-lock.
Tracked-On: #6299
Signed-off-by: Tao Yuhong <yuhong.tao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
When ACRN uses decode_instruction to emulate split-lock/uc-lock
instruction, It is actually a try-decode to see if it is XCHG.
If the instruction is XCHG instruction, ACRN must emulate it
(inject #PF if it is triggered) with peer VCPUs paused, and advance
the guest IP. If the instruction is a LOCK prefixed instruction
with accessing the UC memory, ACRN Halted the peer VCPUs, and
advance the IP to skip the LOCK prefix, and then let the VCPU
Executes one instruction by enabling IRQ Windows vm-exit. For
other cases, ACRN injects the exception back to VCPU without
emulating it.
So change the API to decode_instruction(vcpu, bool full_decode),
when full_decode is true, the API does same thing as before. When
full_decode is false, the different is if decode_instruction() meet unknown
instruction, will keep return = -1 and do not inject #UD. We can use
this to distinguish that an #UD has been skipped, and need inject #AC/#GP back.
Tracked-On: #6299
Signed-off-by: Tao Yuhong <yuhong.tao@intel.com>
MSR_IA32_VMX_EPT_VPID_CAP is 64 bits. Using 32 bits MACROs with it may
cause the bit expression wrong.
Unify the MSR_IA32_VMX_EPT_VPID_CAP operation with 64 bits definition.
Tracked-On: #5923
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
It seems important that passthru device's max payload settings match
the settings on the native device otherwise passthru device may not work.
So we have to set vrp's max payload capacity as native root port
otherwise we may accidentally change passthru device's max payload
since during guest OS's pci device enumeration, pass-thru device will
renegotiate its max payload's setting with vrp.
Tracked-On: #5915
Signed-off-by: Rong Liu <rong.l.liu@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
We should not hardcode the VM ramdisk load address right after kernel
load address because of two reasons:
1. Per Linux kernel boot protocol, the Kernel need a size of
contiguous memory(i.e. init_size field in zeropage) from
its load address to boot, then the address would overlap
with ramdisk;
2. The hardcoded address could not be ensured as a valid address
in guest e820 table, especially with a huge ramdisk;
Also we should not hardcode the VM kernel load address to its pref_address
which work for non-relocatable kernel only. For a relocatable kernel,
it could run from any valid address where bootloader load to.
The patch will set the VM kernel and ramdisk load address by scanning
guest e820 table with find_space_from_ve820() api:
1. For SOS VM, the ramdisk has been loaded by multiboot bootloader
already so set the load address as module source address,
the relocatable kernel would be relocated to a appropriate address
out space of hypervisor and boot modules to avoid guest memory
copy corruption;
2. For pre-launched VM, the kernel would be loaded to pref_address
first, then ramdisk will be put to a appropriate address out space
of kernel according to guest memory layout and maximum ramdisk
address limit under 4GB;
Tracked-On: #5879
Signed-off-by: Victor Sun <victor.sun@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
The API would search ve820 table and return a valid GPA when the requested
size of memory is available in the specified memory range, or return
INVALID_GPA if the requested memory slot is not available;
Tracked-On: #5626
Signed-off-by: Victor Sun <victor.sun@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Given the structure in multiboot.h could be used for any boot protocol,
use a more generic name "boot.h" instead;
Tracked-On: #5661
Signed-off-by: Victor Sun <victor.sun@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Replace rdstc() and get_tsc_khz() with their architectural agnostic
counterparts cpu_ticks() and cpu_tickrate().
Tracked-On: #5920
Signed-off-by: Yi Liang <yi.liang@intel.com>
e820_alloc_memory() splits one E820 entry into two entries. With vEPT
enabled, e820_alloc_memory() is called one more. On some platforms, the
e820 entries might exceed 32.
Enlarge E820_MAX_ENTRIES to 64. Please note, it must be less than 128
due to constrain of zeropage. Linux kernel defines it as 128.
Tracked-On: #6168
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
get_ept_entry() actually returns the EPTP of a VM. So rename it to
get_eptp() for readability.
Tracked-On: #5923
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
With shadow EPT, the hypervisor walks through guest EPT table:
* If the entry is not present in guest EPT, ACRN injects EPT_VIOLATION
to L1 VM and resumes to L1 VM.
* If the entry is present in guest EPT, do the EPT_MISCONFIG check.
Inject EPT_MISCONFIG to L1 VM if the check failed.
* If the entry is present in guest EPT, do permission check.
Reflect EPT_VIOLATION to L1 VM if the check failed.
* If the entry is present in guest EPT but shadow EPT entry is not
present, create the shadow entry and resumes to L2 VM.
* If the entry is present in guest EPT but the GPA in the entry is
invalid, injects EPT_VIOLATION to L1 VM and resumes L1 VM.
Tracked-On: #5923
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Signed-off-by: Zide Chen <zide.chen@intel.com>
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
'struct nept_desc' is used to associate guest EPTP with a shadow EPTP.
It's created in the first reference and be freed while no reference.
The life cycle seems like,
While guest VMCS VMX_EPT_POINTER_FULL is changed, the 'struct nept_desc'
of the new guest EPTP is referenced; the 'struct nept_desc' of the old
guest EPTP is dereferenced.
While guest VMCS be cleared(by VMCLEAR in L1 VM), the 'struct nept_desc'
of the old guest EPTP is dereferenced.
While a new guest VMCS be loaded(by VMPTRLD in L1 VM), the 'struct
nept_desc' of the new guest EPTP is referenced. The 'struct nept_desc'
of the old guest EPTP is dereferenced.
Tracked-On: #5923
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Signed-off-by: Zide Chen <zide.chen@intel.com>
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
To shadow guest EPT, the hypervisor needs construct a shadow EPT for each
guest EPT. The key to associate a shadow EPT and a guest EPT is the EPTP
(EPT pointer). This patch provides following structure to do the association.
struct nept_desc {
/*
* A shadow EPTP.
* The format is same with 'EPT pointer' in VMCS.
* Its PML4 address field is a HVA of the hypervisor.
*/
uint64_t shadow_eptp;
/*
* An guest EPTP configured by L1 VM.
* The format is same with 'EPT pointer' in VMCS.
* Its PML4 address field is a GPA of the L1 VM.
*/
uint64_t guest_eptp;
uint32_t ref_count;
};
Due to lack of dynamic memory allocation of the hypervisor, a array
nept_bucket of type 'struct nept_desc' is introduced to store those
association information. A guest EPT might be shared between different
L2 vCPUs, so this patch provides several functions to handle the
reference of the structure.
Interface get_shadow_eptp() also is introduced. To find the shadow EPTP
of a specified guest EPTP.
Tracked-On: #5923
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Signed-off-by: Zide Chen <zide.chen@intel.com>
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Shadow EPT uses lots of pages to construct the shadow page table. To
utilize the memory more efficient, a page poll sept_page_pool is
introduced.
For simplicity, total platform RAM size is considered to calculate the
memory needed for shadow page tables. This is not an accurate upper
bound. This can satisfy typical use-cases where there is not a lot
of overcommitment and sharing of memory between L2 VMs.
Memory of the pool is marked as reserved from E820 table in early stage.
Tracked-On: #5923
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Signed-off-by: Zide Chen <zide.chen@intel.com>
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Nested VM exits happen when vCPU is in guest mode (VMCS02 is current).
Initially we reflect all nested VM exits to L1 hypervisor. To prepare
the environment to run L1 guest:
- restore some VMCS fields to the value as what L1 hypervisor programmed.
- VMCLEAR VMCS02, VMPTRLD VMCS01 and enable VMCS shadowing.
- load the non-shadowing host states from VMCS12 to VMCS01 guest states.
- VMRESUME to L1 guest with this modified VMCS01.
Tracked-On: #5923
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Signed-off-by: Zide Chen <zide.chen@intel.com>
Signed-off-by: Alexander Merritt <alex.merritt@intel.com>
invvpid and invept instructions cause VM exits unconditionally.
For initial support, we pass all the instruction operands as is
to the pCPU.
Tracked-On: #5923
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Signed-off-by: Zide Chen <zide.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Implement the VMLAUNCH and VMRESUME instructions, allowing a L1
hypervisor to run nested guests.
- merge VMCS control fields and VMCS guest fields to VMCS02
- clear shadow VMCS indicator on VMCS02 and load VMCS02 as current
- set VMCS12 launch state to "launched" in VMLAUNCH handler
Tracked-On: #5923
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Signed-off-by: Zide Chen <zide.chen@intel.com>
Signed-off-by: Alex Merritt <alex.merritt@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Signature of RTCT ACPI table maybe "PTCT"(v1) or "RTCT"(v2).
and the MAGIC number in CRL header is also changed from "PTCM"
to "RTCM".
This patch refine the code to detect RTCT table for both
v1 and v2.
Tracked-On: #6020
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
This patch implements the VMREAD and VMWRITE instructions.
When L1 guest is running with an active VMCS12, the “VMCS shadowing”
VM-execution control is always set to 1 in VMCS01. Thus the possible
behavior of VMREAD or VMWRITE from L1 could be:
- It causes a VM exit to L0 if the bit corresponds to the target VMCS
field in the VMREAD bitmap or VMWRITE bitmap is set to 1.
- It accesses the VMCS referenced by VMCS01 link pointer (VMCS02 in
our case) if the above mentioned bit is set to 0.
This patch handles the VMREAD and VMWRITE VM exits in this way:
- on VMWRITE, it writes the desired VMCS value to the respective field
in the cached VMCS12. For VMCS fields that need to be synced to VMCS02,
sets the corresponding dirty flag.
- on VMREAD, it reads the desired VMCS value from the cached VMCS12.
Tracked-On: #5923
Signed-off-by: Alex Merritt <alex.merritt@intel.com>
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Signed-off-by: Zide Chen <zide.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@Intel.com>
This patch is to emulate VMCLEAR instruction.
L1 hypervisor issues VMCLEAR on a VMCS12 whose state could be any of
these: active and current, active but not current, not yet VMPTRLDed.
To emulate the VMCLEAR instruction, ACRN sets the VMCS12 launch state to
"clear", and if L0 already cached this VMCS12, need to sync it back to
guest memory:
- sync shadow fields from shadow VMCS VMCS to cache VMCS12
- copy cache VMCS12 to L1 guest memory
Tracked-On: #5923
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Signed-off-by: Zide Chen <zide.chen@intel.com>
Enable VMCS shadowing for most of the VMCS fields, so that execution of
the VMREAD or VMWRITE on these shadow VMCS fields from L1 hypervisor
won't cause VM exits, but read from or write to the shadow VMCS.
Tracked-On: #5923
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Signed-off-by: Alexander Merritt <alex.merritt@intel.com>
Signed-off-by: Zide Chen <zide.chen@intel.com>
Software layout of VMCS12 data is a contract between L1 guest and L0
hypervisor to run a L2 guest.
ACRN hypervisor caches the VMCS12 which is passed down from L1 hypervisor
by the VMPTRLD instructin. At the time of VMCLEAR, ACRN syncs the cached
VMCS12 back to L1 guest memory.
Tracked-On: #5923
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Signed-off-by: Zide Chen <zide.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@Intel.com>
This patch emulates the VMPTRLD instruction. L0 hypervisor (ACRN) caches
the VMCS12 that is passed down from the VMPTRLD instruction, and merges it
with VMCS01 to create VMCS02 to run the nested VM.
- Currently ACRN can't cache multiple VMCS12 on one vCPU, so it needs to
flushes active but not current VMCS12s to L1 guest.
- ACRN creates VMCS02 to run nested VM based on VMCS12:
1) copy VMCS12 from guest memory to the per vCPU cache VMCS12
2) initialize VMCS02 revision ID and host-state area
3) load shadow fields from cache VMCS12 to VMCS02
4) enable VMCS shadowing before L1 Vm entry
Tracked-On: #5923
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Signed-off-by: Zide Chen <zide.chen@intel.com>
This patch implements the VMXOFF instruction. By issuing VMXOFF,
L1 guest Leaves VMX Operation.
- cleanup VCPU nested virtualization context states in VMXOFF handler.
- implement check_vmx_permission() to check permission for VMX operation
for VMXOFF and other VMX instructions.
Tracked-On: #5923
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Signed-off-by: Zide Chen <zide.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@Intel.com>
According to VMXON Instruction Reference, do the following checks in the
virtual hardware environment: vCPU CPL, guest CR0, CR4, revision ID
in VMXON region, etc.
Currently ACRN doesn't support 32-bit L1 hypervisor, and injects an #UD
exception if L1 hypervisor is not running in 64-bit mode.
Tracked-On: #5923
Signed-off-by: Zide Chen <zide.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@Intel.com>
This patch emulates VMXON instruction. Basically checks some
prerequisites to enable VMX operation on L1 guest (next patch), and
prepares some virtual hardware environment in L0.
Tracked-On: #5923
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Signed-off-by: Zide Chen <zide.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@Intel.com>
Create virtual root port through add_vdev hypercall. add_vdev
identifies the virtual device to add by its vendor id and device id, then
call the corresponding function to create virtual device.
-create_vrp(): Find the right virtual root port to create
by its secondary bus number, then initialize the virtual root port.
And finally initialize PTM related configurations.
-destroy_vrp(): nothing to destroy
Tracked-On: #5915
Signed-off-by: Rong Liu <rong.l.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Acked-by: Jason Chen <jason.cj.chen@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Add virtual root port that supports the most basic pci-e bridge and root port operations.
- init_vroot_port(): init vroot_port's basic registers.
- deinit_vroot_port(): reset vroot_port
- read_vroot_port_cfg(): read from vroot_port's virtual config space.
- write_vroot_port_cfg(): write to vroot_port's virtual config space.
Tracked-On: #5915
Signed-off-by: Rong Liu <rong.l.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Acked-by: Jason Chen <jason.cj.chen@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
x86/timer.[ch] was moved to the common directory largely unchanged.
x86 specific code now resides in x86/tsc_deadline_timer.c and its
interface was defined in hw/hw_timer.h. The interface defines two
functions: init_hw_timer() and set_hw_timeout() that provides HW
specific initialization and timer interrupt source.
Other than these two functions, the timer module is largely arch
agnostic.
Tracked-On: #5920
Signed-off-by: Rong Liu <rong2.liu@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Modules that use udelay() should include "delay.h" explicitly.
Tracked-On: #5920
Signed-off-by: Rong Liu <rong2.liu@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Generalize and split basic cpu cycle/tick routines from x86/timer:
- Instead of rdstc(), use cpu_ticks() in generic code.
- Instead of get_tsc_khz(), use cpu_tickrate() in generic code.
- Include "common/ticks.h" instead of "x86/timer.h" in generic code.
- CYCLES_PER_MS is renamed to TICKS_PER_MS.
The x86 specific API rdstc() and get_tsc_khz(), as well as TSC_PER_MS
are still available in arch/x86/tsc.h but only for x86 specific usage.
Tracked-On: #5920
Signed-off-by: Rong Liu <rong2.liu@intel.com>
Signed-off-by: Yi Liang <yi.liang@intel.com>
RTCT has been updated to version 2,
this patch updates hypervisor RTCT parser to support
both version 1 and version 2 of RTCT.
Tracked-On: #6020
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Reviewed-by: Jason CJ Chen <jason.cj.chen@intel.com>
