Emulate Device ID, Vendor ID and MSE(Memory Space Enable) bit in
configuration space for an assigned VF, initialize assgined VF Bars.
The Device ID comes from PF's SRIOV capability
The Vendor ID comes from PF's Vendor ID
The PCI MSE bit always be set when VM reads from an assigned VF.
Tracked-On: #4433
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
If a VF instance is disabled, we didn’t remove the vdev instance,
only set the vdev as a zombie vdev instance, indicating that it
cannot be accessed anymore.
Tracked-On: #4433
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Change name find_vdev to find_available_vdev and add comments
Tracked-On: #4433
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The VF BARs are initialized by its PF SRIOV capability
Tracked-On: #4433
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Refine coding style to wrap msix map/unmap operations, clean up repeated
assignments for msix mmio_hpa and mmio_size.
Tracked-On: #4433
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Add _v prefix for some function name to indicate this function wants to operate
on virtual CFG space or virtual BAR register.
Tracked-On: #4371
Signed-off-by: Li Fei1 <fei1.li@intel.com>
Since there is no RTVM requirement for sdc2 scenario, replace uuid
495ae2e5-2603-4d64-af76-d4bc5a8ec0e5 which is dedicated to RTVM with
615db82a-e189-4b4f-8dbb-d321343e4ab3
Tracked-On: #4472
Signed-off-by: fuzhongl <fuzhong.liu@intel.com>
Reviewed-by: Sun Victor <victor.sun@intel.com>
Removed the pci_vdev_write_cfg_u8/u16/u32 APIs and only used
pci_vdev_write_cfg as the API for writing vdev's cfgdata
Tracked-On: #4433
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
In Commit 127c73c3, we remove the strict check for adding page table mapping. However,
we just replace the ASSERT of pr_fatal in add_pte. This is not enough. We still add
the virtual address by 4K if the page table mapping is exist and check the virtual
address is over the virtual address region for this mapping. Otherwise, The complain
will continue for 512 times at most.
Tracked-On: #3475
Signed-off-by: Li Fei1 <fei1.li@intel.com>
Add cfg_header_read_cfg and cfg_header_write_cfg to handle the 1st 64B
CFG Space header PCI configuration space.
Only Command and Status Registers are pass through;
Only Command and Status Registers and Base Address Registers are writable.
In order to implement this, we add two type bit mask for per 4B register:
pass through mask and read-only mask. When pass through bit mask is set, this
means this bit of this 4B register is pass through, otherwise, it is virtualized;
When read-only mask is set, this means this bit of this 4B register is read-only,
otherwise, it's writable. We should write it to physical CFG space or virtual
CFG space base on whether the pass through bit mask is set or not.
Tracked-On: #4371
Signed-off-by: Li Fei1 <fei1.li@intel.com>
1. Renames DEFINE_IOAPIC_SID with DEFINE_INTX_SID as the virtual source can
be IOAPIC or PIC
2. Rename the src member of source_id.intx_id to ctlr to indicate interrupt
controller
2. Changes the type of src member of source_id.intx_id from uint32_t to
enum with INTX_CTLR_IOAPIC and INTX_CTLR_PIC
Tracked-On: #4447
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
for vpci_bridge it is better just write the virtual configure space,
so move out the PCI bridge phyiscal cfg write to pci.c
also add some rules in config pci bridge.
Tracked-On: #3381
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
For SRIOV needs ARI support, so enable it in HV if
the PCI bridge support it.
TODO:
need check all the PCI devices under this bridge can support ARI,
if not, it is better not enable it as PCIe spec. That check will be
done when scanning PCI devices.
Tracked-On: #3381
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
- remove limit of CONFIG_HV_RAM_SIZE which is for scenario of 2 VMs only,
the default size from Kconfig could build scenario which up to 5 VMs;
- rename whl-ipc-i5_acpi_info.h to platform_acpi_info.h, since the former
one should be generated by acrn-config tool;
- add SOS related macros in misc.h, otherwise build scenarios which has
SOS VM would be failed;
Tracked-On: #4463
Signed-off-by: Victor Sun <victor.sun@intel.com>
- remove .data and .text directives. We want to place all the boot data and
text in the .entry section since the boot code is different from others
in terms of relocation fixup. With this change, the page tables are in
entry section now and it's aligned at 4KB.
- regardless CONFIG_MULTIBOOT2 is set or not, the 64-bit entry offset is
fixed at 0x1200:
0x00 -- 0x10: Multiboot1 header
0x10 -- 0x88: Multiboot2 header if CONFIG_MULTIBOOT2 is set
0x1000: start of entry section: cpu_primary_start_32
0x1200: cpu_primary_start_64 (thanks to the '.org 0x200' directive)
GDT tables
initial page tables
etc.
Tracked-On: #4441
Reviewed-by: Fengwei Yin <fengwei.yin@intel.com>
Signed-off-by: Zide Chen <zide.chen@intel.com>
This is to enable relocation for code32.
- RIP relative addressing is available in x86-64 only so we manually add
relocation delta to the target symbols to fixup code32.
- both code32 and code64 need to load GDT hence both need to fixup GDT
pointer. This patch declares separate GDT pointer cpu_primary64_gdt_ptr
for code64 to avoid double fixup.
- manually fixup cpu_primary64_gdt_ptr in code64, but not rely on relocate()
to do that. Otherwise it's very confusing that symbols from same file could
be fixed up externally by relocate() or self-relocated.
- to make it clear, define a new symbol ld_entry_end representing the end of
the boot code that needs manually fixup, and use this symbol in relocate()
to filter out all symbols belong to the entry sections.
Tracked-On: #4441
Reviewed-by: Fengwei Yin <fengwei.yin@intel.com>
Signed-off-by: Zide Chen <zide.chen@intel.com>
GRUB multiboot2 doesn't support relocation for ELF, which means it can't
load acrn.32.out to other address other than the one specified in ELF
header. Thus we need to use the raw binary file acrn.bin, and add
address/entry address/relocatable tags to instruct multiboot2 loader
how to load the raw binary.
Tracked-On: #4441
Reviewed-by: Fengwei Yin <fengwei.yin@intel.com>
Signed-off-by: Zide Chen <zide.chen@intel.com>
In direct boot mode, boot_context[] which is saved from cpu_primary_save_32()
is no longer used since commit 6beb34c3cb ("vm_load: update init gdt
preparation"). Thus, the call to it and the function itself can be removed.
Tracked-On: #4441
Reviewed-by: Fengwei Yin <fengwei.yin@intel.com>
Signed-off-by: Zide Chen <zide.chen@intel.com>
reduce the use of similar APIs (particularly the name confusion) for
CFG space read/write.
Tracked-On: #4433
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Make the name of the functions more accurate
Tracked-On: #4433
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Add some pre-assumption and safety check for PCIe ECAM:
1) ACRN only support platforms with PCIe ECAM to access PCIe device CFG space;
2) Must not use ECAM to access PCIe device CFG space before
pci_switch_to_mmio_cfg_ops was called. (In release version, ACRN didn't support
IO port Mechanism. ECAM is the only way to access the PCIe device CFG space).
Tracked-On: #4371
Signed-off-by: Li Fei1 <fei1.li@intel.com>
One argument is missing for the function ptirq_alloc_entry.
This patch fixes the doc generation error.
Tracked-On: #3882
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
- change variable name from hpa to hva because in this function we are
dealing with hva, not hpa.
- can get the address of ld_text_end by directly referring to this symbol,
because relative addressing yields the correct hva, not the hva before
relocation.
Tracked-On: #4441
Signed-off-by: Zide Chen <zide.chen@intel.com>
The pci_read_cap and pci_read_ext_cap are used to enumerate PCI
legacy capability and extended capability.
Change the name pci_read_cap to pci_enumerate_cap
Change the name pci_read_ext_cap to pci_enumerate_ext_cap
Tracked-On: #4433
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Fixed misspellings and rst formatting issues.
Added ptdev.h to the list of include file for doxygen
Tracked-On: #3882
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Add doxygen style comments to ptdev public APIs.
Add these API descriptions to group acrn_passthrough.
Tracked-On: #3882
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
This patch updates board.c files for RDT MBA on existing
platforms. Also, fixes setting RDT flag in WHL config file.
Tracked-On: #3725
Signed-off-by: Vijay Dhanraj <vijay.dhanraj@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This patch adds RDT MBA support to detect, configure and
and setup MBA throttle registers based on VM configuration.
Tracked-On: #3725
Signed-off-by: Vijay Dhanraj <vijay.dhanraj@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
create new pdev and vdev structures for a SRIOV VF device initialization
Tracked-On: #4433
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Add a new parameter pf_vdev for function vpci_init_vdev to support SRIOV
VF vdev initializaiton.
Tracked-On: #4433
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The init_one_dev_config is used to initialize a acrn_vm_pci_dev_config
SRIOV needs a explicit acrn_vm_pci_dev_config to create a VF vdev,so
refine it to return acrn_vm_pci_dev_config.
Tracked-On: #4433
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Due to SRIOV VF physical device needs to be initialized when
VF_ENABLE is set and a SRIOV VF physical device initialization
is same with standard PCIe physical device, so expose the
init_pdev for SRIOV VF physical device initialization.
Tracked-On: #4433
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
All SRIOV VF physical devices don't have bars in configuration space,
they are from the VF associated PF's VF_BAR registers of SRIOV capability.
Adding a vbars data structure in pci_cap_sriov data structure to store
SRIOV VF_BAR information, so that each VF bars can be initialized directly
through the vbars instead multiple accessing of the PF VF_BAR registers.
Tracked-On: #4433
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
To support SRIOV capability initialization, add a new parameter
is_sriov_pf_vdev for init_vdev_pt function.
If parameter is_sriov_pf_vdev of function init_vdev_pt is true,
then function init_vdev_pt initializes the vdev's SRIOV capability.
Tracked-On: #4433
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Current code avoid the rule 88 S in MISRA-C, so move xsaves and xrstors
assembler to individual functions.
Tracked-On: #4436
Signed-off-by: Conghui Chen <conghui.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
VF_ENABLE is one field of SRIOV capability that is used to create
or remove VF physical devices. If VF_ENABLE is set, hv can detect
if the VF physical devices are ready after waiting 100 ms.
v2: Add sanity check for writing NumVFs register, add precondition
and application constraints when VF_ENABLE is set and refine
code style.
Tracked-On: #4433
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Introduce SRIOV capability field for pci_vdev and add SRIOV capability
interception entries.
Tracked-On: #4433
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Make the SRIOV-Capable device invisible from SOS if there is
no room for its all virtual functions.
v2: fix a issue that if a PF has been dropped, the subsequent PF
will be dropped too even there is room for its VFs.
Tracked-On: #4433
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
if the device has PCIe capability, walks all PCIe extended
capabilities for SRIOV discovery.
v2: avoid type casting and refine naming.
Tracked-On: #4433
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
It puts the new line in the wrong place, and the logs are confusing.
For example, for these entries:
mmap[0] - type: 1, base: 0x00000, length: 0x9800
mmap[1] - type: 2, base: 0x98000, length: 0x8000
mmap[2] - type: 3, base: 0xc0000, length: 0x4000
Currently it prints them in this way:
mmap table: 0 type: 0x1
Base: 0x0000000000000000 length: 0x0000000000098000
mmap table: 1 type: 0x2
Base: 0x0000000000098000 length: 0x0000000000008000
mmap table: 2 type: 0x3
Base: 0x00000000000c0000 length: 0x0000000000040000
With this fix, it looks like the following, and now it's of same style
with how prepare_sos_vm_memmap() logs ve820 tables.
mmap table: 0 type: 0x1
Base: 0x0000000000000000 length: 0x0000000000098000
mmap table: 1 type: 0x2
Base: 0x0000000000098000 length: 0x0000000000008000
mmap table: 2 type: 0x3
Base: 0x00000000000c0000 length: 0x0000000000040000
Tracked-On: #1842
Signed-off-by: Zide Chen <zide.chen@intel.com>
add vpci bridge operations in hypervisor, to avoid SOS mis-operations
to affect other VM's PCI devices.
assumption: before hypervisor bootup, the physical pci-bridge shall be
configured correctly by BIOS or other bootloader; for ACS (Access
Control Service) capability, it is configured by BIOS to support the
devices under it to be isolated and allocated to different VMs.
to simplify the emulations of vpci bridge, set limitations as following:
1. expose all configure space registers, but readonly
2. BIST not support; by default is 0
3. not support interrupt, including INTx and MSI.
TODO:
1. configure tool can select whether a PCI bridge is emulated or pass
through.
Open:
1. SOS how to reset PCI device under the PCI bridge?
Tracked-On: #3381
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Acked-by: Eddie Dong <eddie.dong@Intel.com>
The init value for XCR0 and XSS should be the same with spec:
In SDM Vol1 13.3:
XCR0[0] is associated with x87 state (see Section 13.5.1). XCR0[0] is
always 1. The other bits in XCR0 are all 0 coming out of RESET.
The IA32_XSS MSR (with MSR index DA0H) is zero coming out of RESET.
The previous code try to fix the xsave area leak to other VMs during init
phase, but bring the error to linux. Besides, it cannot avoid the
possible leak in running phase. Need find a better solution.
Tracked-On: #4430
Signed-off-by: Conghui Chen <conghui.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The dedicated DMAR unit for Intel integrated GPU
shall be available on the physical platform.
So remove the assert and add application constraint
in handle_one_drhd func.
Tracked-On: #4405
Signed-off-by: Junming Liu <junming.liu@intel.com>
Reviewed-by: Wu Binbin <binbin.wu@intel.com>
Reviewed-by: Wu Xiangyang <xiangyang.wu@linux.intel.com>
is not set
This patch does the following,
1. Removes RDT code if CONFIG_RDT_ENABLED flag is
not set.
2. Set the CONFIG_RDT_ENABLED flag only on platforms
that support RDT so that build scripts will automatically
reflect the config.
Tracked-On: #3715
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Signed-off-by: Vijay Dhanraj <vijay.dhanraj@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
cache configuration.
This patch creates a generic infrastructure for
RDT resources instead of just L2 or L3 cache. This
patch also fixes L3 CAT config overwrite by L2 in
cases where both L2 and L3 CAT are supported.
Tracked-On: #3715
Signed-off-by: Vijay Dhanraj <vijay.dhanraj@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
There can be times when user unknowinlgy enables
CONFIG_CAT_ENBALED SW flag, but the hardware might
not support L3 or L2 CAT. In such case software can
end up writing to the CAT MSRs which can cause
undefined results. The patch fixes the issue by
enabling CAT only when both HW as well software
via the CONFIG_CAT_ENABLED supports CAT.
The patch also address typo with "clos2prq_msr"
function name. It should be "clos2pqr_msr" instead.
PQR stands for platform qos register.
Tracked-On: #3715
Signed-off-by: Vijay Dhanraj <vijay.dhanraj@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Upcoming intel platforms can support both L2 and L3
but our current code only supports either L2 or L3 CAT.
So split the MSRs so that we can support allocation
for both L2 and L3.
This patch does the following,
1. splits programming of L2 and L3 cache resource
based on the resource ID.
2. Replace generic platform_clos_array struct with resource
specific struct in all the existing board.c files.
Tracked-On: #3715
Signed-off-by: Vijay Dhanraj <vijay.dhanraj@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
As part of rdt cat refactoring, goal is to combine all rdt
specific features such as CAT under one module. So renaming
rdt resouce specific files such as cat.c/.h to generic rdt.c/.h
files.
Tracked-On: #3715
Signed-off-by: Vijay Dhanraj <vijay.dhanraj@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Per Section 4.4 Speculation Barriers, in
"Retpoline: A Branch Target Inject Mitigation" white paper,
"LFENCE instruction limits the speculative execution that
a processor implementation can perform around the LFENCE,
possibly impacting processor performance,but also creating
a tool with which to mitigate speculative-execution
side-channel attacks."
Tracked-On: #4424
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
