With pins being uint8_t, implicit narrowing conversions arises since unsigned
integer constants, irq IDs and general registers have type ''unsigned
int''. Make such conversions explicit.
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
PIC pin IDs should be logically unsigned, while we currently use ''int'' to
represent them.
Following the convention we use unsigned IDs, this patch converts the
representation of pins to uint8_t. A special value VPIC_INVALID_PIN is
introduced to represent the case when a valid target pin cannot be
found (previously -1 is used for this case). The branch conditions are updated
accordingly, following the convention below.
(for ''pin''s representing a per-PIC pin)
if (pin != -1) -> if (pin < NR_VPIC_PINS_PER_CHIP)
if (pin == -1) -> if (pin >= NR_VPIC_PINS_PER_CHIP)
if (pin >= 0 && pin < 8) -> if (pin < NR_VPIC_PINS_PER_CHIP)
if (pin >= 0 && pin <= 7) -> if (pin < NR_VPIC_PINS_PER_CHIP)
if (pin >= 0) -> if (pin < NR_VPIC_PINS_PER_CHIP)
(for ''pin''s representing a pin in the vPIC with 2 cascading PICs)
if (pin >= 0 && pin <= 15) -> if (pin < NR_VPIC_PINS_TOTAL)
if (pin > 15) -> if (pin >= NR_VPIC_PINS_TOTAL)
Related local variables are also changed accordingly.
v1 -> v2:
* Rename the number of pins per PIC to NR_VPIC_PINS_PER_CHIP, and the number
of pins of 2 cascading PICs to NR_VPIC_PINS_TOTAL.
* Using "%hhu" instead of "%d" in format string when a pin is expected.
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
According intel mannual and ACPI mannual,lapic_id length is 1 byte.
V1->V2:
Add U suffix to the numeric when do arithmetic operation on lapic.
Signed-off-by: Huihuang Shi <huihuang.shi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This patch drops the duplicated definitions to ''true'' and ''false'' and
initializes boolean variables with boolean values instead of integers.
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Port I/O handlers are expected to accept unsigned port address and width which
have type uint16_t and size_t accordingly. The internal handlers in vpic, on the
other hand, declares signed addresses and width in their prototypes. This patch
enforces unsignedness of addresses and widths in these handlers.
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The number of initialization command word (ICW) and register contents are
logically unsigned and they have already been used in such way. This patch
changes the declaration of them so that the declarations, definitions and uses
are all aligned.
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
ACRN needs to trap the pm1a/pm1b written/read from VM0. So we
could know when should we put the system to S3.
We will have two path back to VM0:
- S3 enter/exit sucess. Will reset VM0 and jump to VM0 wakeup vec
with real mode
- S3 enter/exit failed. Will return to the next instruction of
pm1a/pm1b register writing. VM0 will read the pm1a/pm1b evt
register to check whether it's waked up or not.
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
S3 resume path for VM0 is put bsp of VM0 to real mode and jump
to the wakeup vec of VM0. So we need to extend the init_guest_state
to support start from real mode.
We apply different CS:IP setting for BSP:
- if entry_addr of BSP is larger than 0x100000, it's not wakeup
from S3. We assume it's guest start and set CS:IP by hardcode.
- if entry_addr of BSP is smaller than 0x100000, it's wakeup
from S3. We setup CS:IP according to ACPI spec.
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Emulate VM0 resume from S3 state:
- reset BSP of VM0
- set the BSP entry to saved VM0 wakeup vec and set BSP to real mode
- start BSP
To match trampoline_spinlock release on ACRN Sx resume path, acquire
trampoline_spinlock if ACRN Sx enter fails.
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
enter_s3 is main function for ACRN to enter S3 state with following
process:
- pause vm0
- save the wakeup vec of vm0 and set wakeup vec of ACRN. So
resume from S3 will jump to ACRN wakeup
- offline APs
- update the main entry of trampoline to resume entry. After BSP
is resume from S3, it will jump to resume entry instead of AP
startup routine
- turn off vmx
- suspend devices
- enter S3.
exit S3 with following process:
- release trampoline_spinlock which is hold in trampoline code
- resume devices
- enable vmx
- update the main entry of trampoline to AP startup routine.
- online APs.
The following operations will be resume vm0 which will be added
in next patch.
Signed-off-by: Zheng Gen <gen.zheng@intel.com>
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Couple of small changes merged in this change:
- export main_entry, trampoline_spinlock and stop_cpus.
- change vm_resume() name to resume_vm()
- change resume_console_enable() name to resume_console()
- extend reset_vcpu to reset more fields of vcpu
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The S3 enter lowlevel routine saves the cpu context to memory
and enter S3 state
The S3 wakeup lowlevel routine restore cpu context and return.
Signed-off-by: Zheng Gen <gen.zheng@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
- add a commont head file include/common/irq.h, to include the common data
structure and APIs;
- move the common data struct and APIs from arch/x86/irq.h to the common header.
Signed-off-by: Yan, Like <like.yan@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
To make the file structure clearer, change the file names:
- rename arch/x86/interrupt.c to virq.c, for the virtual irq relavant code,
such as irq injection etc;
- merge arch/x86/intr_main.c into arch/x86/irq.c;
- rename arch/x86/intr_lapic.c to lapic.c
Signed-off-by: Yan, Like <like.yan@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
MISRA C required function return type should be consistented.
Signed-off-by: Huihuang Shi <huihuang.shi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
It is already assumed that ''long'' has 8-bytes, and thus there is no need to
use ULL to indicate a 8-byte unsigned constant.
This patch changes all ULL suffixes found in the hypervisor to UL.
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
- to avoid reading operations on MTRR registers if
no MTRR feature support on current platform in "init_mtrr()".
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Snoop control is not supported in the graphics VT-d engine and so should
be disabled in the PTEs. Also enabled iommu for graphics in the
dmar_drhd array.
v2: removed disable iommu in handle_one_drhd and combined if cond.
v3: minor code review changes
v4: moved the snoop control change to ept.c to accomodate upstream changes
Signed-off-by: Anitha Chrisanthus <anitha.chrisanthus@intel.com>
Reviewed-by: Gong Zhipeng <zhipeng.gong@intel.com>
Fix the type for vector in ioapic setup, which is a potential problem:
- return VECTOR_INVALID instead of false in irq_desc_alloc_vector()
when irq is out of range;
- change variable type from int to uint32_t for vector, and correct
the returned value check.
Signed-off-by: Yan, Like <like.yan@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
It could be also used by host as well. So we remove GUEST from
MACRO name
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Eddie Dong <Eddie.dong@intel.com>
for bsp_boot_init/cpu_secondary_init, they are on temp stack.
for bsp_boot_post/cpu_secondary_post, they are on runtime stack.
define SWITCH_TO MACRO to switch runtime stack then jump to post functions.
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
MISRA C requires that unsigned constants should have the 'U' suffix, while this
C syntax is not accepted by binutils assembler per binutil manual.
This patch explicitly spells out the unsigned constants used in the assembly
files while tracking the original expressions in comments. This fixes build
failure when using binutils <= 2.26.
v2 -> v3:
* Explicitly spell out the unsigned constants in assembly, instead of
duplicating the macros in headers which break the integrity of the
definitions.
v1 -> v2:
* Define different macros instead of wrapping all unsigned constants.
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
phys_cpu_num is more popular than phy_cpu_num, update them
through command.
Signed-off-by: Xiangyang Wu <xiangyang.wu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Update the structure definition to define the address type
(HVA vs HPA vs GPA) explicitly.
Convert address to HVA before access the GPA/HPA type of address.
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Before we set the page table, we should know the attribute. So
move configure the page table attribute outside of modify_paging.
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
MISRA C doesn't allowed negative shift, changed any potential signed value
to unsigned value.
Signed-off-by: Huihuang Shi <huihuang.shi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The member of width in struct e820_entries,can be declared to
uint32_t(the range of the member is bigger than 0) to avoid
negative shift.
Signed-off-by: Huihuang Shi <huihuang.shi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
MISRA C doesn't allowed negative shift, changed any potential signed value
to unsigned value.
Signed-off-by: Huihuang Shi <huihuang.shi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
In the hypervisor, physical cpu id is defined as "int" or "uint32_t"
type in the hypervisor. So there are some sign conversion issues
about physical cpu id (pcpu_id) reported by static analysis tool.
Sign conversion violates the rules of MISRA C:2012.
In this patch, define physical cpu id as "uint16_t" type for all
modules in the hypervisor and change related codes. The valid
range of pcpu_id is 0~65534, INVALID_PCPU_ID is defined to the
invalid pcpu_id for error detection, BROADCAST_PCPU_ID is
broadcast pcpu_id used to notify all valid pcpu.
The type of pcpu_id in the struct vcpu and vcpu_id is "int" type,
this will be fixed in another patch.
V1-->V2:
* Change the type of pcpu_id from uint32_t to uint16_t;
* Define INVALID_PCPU_ID for error detection;
* Define BROADCAST_PCPU_ID to notify all valid pcpu.
V2-->V3:
* Update comments for INVALID_PCPU_ID and BROADCAST_PCPU_ID;
* Update addtional pcpu_id;
* Convert hexadecimals to unsigned to meet the type of pcpu_id;
* Clean up for MIN_PCPU_ID and MAX_PCPU_ID, they will be
defined by configuration.
Note: fix bug in the init_lapic(), the pcpu_id shall be less than 8,
this is constraint by implement in the init_lapic().
Signed-off-by: Xiangyang Wu <xiangyang.wu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Per MISRA C, operands to bit-wise operations should have unsigned
types. However, C99 prioritizes to use signed integers for hexadecimal constants
without the 'U' suffixes, leading to tons of bit operations on signed integers.
This patch series add the 'U' suffixes to the constants which are used in bit
operations, and add the intended width of these integers when applicable
(i.e. the target value is at least 32-bit wide) to avoid functional differences
due to signed vs. unsigned extensions. The rule of thumb is:
'0' for signed char/short/int
'0U' for unsigned char/short/int
'0L' for signed long (should be 64-bit)
'0UL' for unsigned long (should be 64-bit)
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
MISRA C explicit required expression should be boolean when
in branch statements (if,while...).
Signed-off-by: Huihuang Shi <huihuang.shi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
MISRA C explicit required expression should be boolean when
in branch statements (if,while...).
Signed-off-by: Huihuang Shi <huihuang.shi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
MISRA C explicit required expression should be boolean when
in branch statements (if,while...).
Signed-off-by: Huihuang Shi <huihuang.shi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
MISRA C explicit required expression should be boolean when
in branch statements (if,while...).
Signed-off-by: Huihuang Shi <huihuang.shi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
1. remove duplicated definitions of mem_loglevel/console_loglevel;
2. Set default loglevels to display important messages:
- CONSOLE_LOGLEVEL_DEFALUT is changed from 2 to 3;
- MEM_LOGLEVEL_DEFAULT is changed from 4 to 5.
Acked-by: Eddie Dong <eddie.dong@intel.com>
Signed-off-by: Yan, Like <like.yan@intel.com>
We will get following warnings when build acrn as release version. This patch
fix those warnings.
No functional change.
...
arch/x86/cpu.c: In function ‘stop_cpus’:
arch/x86/cpu.c:727:20: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
if (get_cpu_id() == i) /* avoid offline itself */
^~
arch/x86/vtd.c: In function ‘dmar_enable_translation’:
arch/x86/vtd.c:84:12: warning: unused variable ‘start’ [-Wunused-variable]
uint64_t start = rdtsc(); \
...
arch/x86/guest/instr_emul.c: In function ‘get_gla’:
arch/x86/guest/instr_emul.c:615:6: warning: variable ‘error’ set but not used [-Wunused-but-set-variable]
int error;
...
Signed-off-by: Kaige Fu <kaige.fu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
- when init, cr0 & cr4 should read from VMCS
- when world switch, cr0/cr4 read shadow should also be save/restore
v2:
- use context->vmx_cr0/cr4 to save/restore VMX_GUEST_CR0/CR4
- use context->cr0/cr4 to save/restore VMX_CR0/CR4_READ_SHADOW
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
set trusty eptp to 0 after destroy, and only invalidate trusty eptp when it
exist.
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Acked-by: Xu, Anthony <anthony.xu@intel.com>
We should use list_del_init here. Otherwise it would misorder the
timer list if we would delete timer more than once if there're more
than one timer on it.
Change-Id: I2d18248173ced1ea1b723352327d2c3d0efc4900
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
MISRA C required that return value should be used, missing for it should
add "(void)" prefix before the function call.
Some function can be declared without return value to avoid this problem.
Signed-off-by: Huihuang Shi <huihuang.shi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
remove_intx_remapping is not global function, make static.
Unlike global functions in C, access to static functions is restricted to the file where they are declared. Another reason for making functions static can be reuse of the same function name in other files
Signed-off-by: Chris Ye <chris.ye@intel.com>
