foreach_vcpu will go through all vcpu_array and only call the following
code when vcpu != NULL
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
In current code, general-purpose register layout in run_context is not align with the
general-purpose register index when vmexit. So hv needs to map the index used during
vmexit to the index of the general-purpose register in run_context.
This patch align the layout, so that no mapping needed.
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Most of the time, we use the virtual address of EPT PMl4 table,
not physical address.
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
- Remove those APIs without definition
- Minor changes to make sure the line length is less than 80
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
There are many type conversions in the atomic
operations invoking reported by static analysis tool. These
type conversions voilate MISRA C.
To keep uniform naming convention, rename atomic operation
function names:
atomic_set_int/long --> atomic_set32/64;
atomic_clear_int/long --> atomic_clear32/64;
atomic_load --> atomic_load32;
atomic_store --> atomic_store32;
atomic_swap --> atomic_swap32;
atomic_readandclear --> atomic_readandclear32;
atomic_inc --> atomic_inc32;
atomic_dec --> atomic_dec32;
atomic_cmpxchg --> atomic_cmpxchg32;
atomic_xadd --> atomic_xadd32.
Update the type of atomic_load32/64, atomic_store32/64,
atomic_swap32/64, atomic_cmpxchg32/6.
Update related variables and callers.
Note: the type of return value and parameters of atomic_xadd32/64
still keep signed int/long since caller pass
negative variable to atomic_xadd32/64;
V1-->V2:
Add comments for atomic_set/clear to differ from
bitmap_set/clear.
Signed-off-by: Xiangyang Wu <xiangyang.wu@intel.com>
Reviewed-by: Junjie.Mao <junjie.mao@intel.com>
Current code has a mistake associating destination with
redirectionhint. So just use the destination mode to work out
destination mode.
When injecting the msi interrupt to vcpu in hypervisor layer,
current code ingnores the redirection hint(RH) bit of msi address
message from guest, and just use the destination mode and
destination ID. So correctly before injecting, check the RH bit,
if set, choose the vcpu that has lowest priority to inject msi.
Signed-off-by: Zheng, Gen <gen.zheng@intel.com>
Reviewed-by: Zhao, Yakui <yakui.zhao@intel.com>
Reviewed-by: Yin, Fengwei <fengwei.yin@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
In the hypervisor, VMCS fields include 16-bit fields,
32-bit fields, 64-bit fields and natural-width fields.
In the current implement, no exec_vmread32/exec_vmwrite32
is for accessing 32-bit fields. So there are many type
casting for the return value and parameters vmread/vmwrite
operations.
Create exec_vmread32 and exec_vmwrite32 functions to
access 32-bit fields in VMCS;
Update related variables type for vmread/vmwrite operations;
Update related caller according to VMCS fields size.
V1--V2:
This is new part of this patch serial to only
update 32 bit vmread/vmread opertions and related
caller.
V2-->V3:
Update related variables type in data structure
for exec_vmread32/exec_vmwrite32.
Rename temp variable 'low' into 'value' for
exec_vmread32;
V3-->V4:
Remove useless type conversion.
Signed-off-by: Xiangyang Wu <xiangyang.wu@intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
fix integer type violations,keep some violations which
related to hypcall and msix_entry_index.
V1->V2:1.modified API_MAJOR_VERSION from Makefile
2.sync acrn_common.h changed to device model
Signed-off-by: Huihuang Shi <huihuang.shi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This patch cleans up the integral-type-related violations after the access
pattern to RTEs is unified. Major changes include:
1. vioapic_mmio_read(), vioapic_mmio_write() and vioapic_mmio_rw() assumes
the size of the register to be accessed is always 4, which is checked in
vioapic_mmio_access_handler(). Thus they no longer takes the unused
''size'' parameter.
2. Typical integral-type-related violation fixes including 'U' suffixes,
type of local variables, conversion specification in format strings, etc.
v1 -> v2:
* Drop duplicated definitions to IOAPIC register offsets.
* Drop the ''size'' parameter of vioapic_mmio_[read|write] and
vioapic_mmio_rw since vioapic_mmio_access_handler() ensures that size is
always 4.
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
There are two different ways the current implementation adopts to access ioapic
RTEs:
1. As two 32-bit registers (typically named ''low'' and ''high''), or
2. As one 64-bit register (typically named ''rte'').
Two issues arise due to the mixed use of these two patterns.
1. Additional conversions are introduced. As an example, ioapic_get_rte()
merges two RTE fragments into a uint64_t, while some callers break it
back to ''low'' and ''high'' again.
2. It is tricky to choose the proper width of IOAPIC_RTE_xxx constants. SOS
boot failure is seen when they are 32-bit due to the following code:
/* reg is uint64_t */
vioapic->rtbl[pin].reg &= ~IOAPIC_RTE_REM_IRR;
while making them 64-bit leads to implicit narrowing when the RTEs are accessed
in the low & high pattern.
This patch defines a union ''ioapic_rte'' and unifies the access pattern
to IOAPIC and vIOAPIC RTEs.
v1 -> v2:
* Instead of two 32-bit ''low'' and ''high'', define a union that allows
either 32-bit or 64-bit accesses to RTEs.
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The main focus on: constant suffix U/UL; parameters cast like
uint32 to a uint16 variable; unify some APIs interface,
consist with the callers.
also modify some places to unify code style
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Signed/unsigned conversion should add cast explicitily
or change the type of them to the same.
V1->V2:Fixed the 0U to 0UL because of the mistakes.
V2->V3:remove unsed macro
Signed-off-by: HuiHuang Shi <huihuang.shi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
vmid's type prefered to be uint16_t.
V1->V2:vmid from uint32_t transfer to uint16_t
V2->V3:add range check to hcall's vmid parameter
V3->V4:seperate the declaration and actual code.
V4->V5:remove range check from hcall's vmid parameter
Signed-off-by: Huihuang Shi <huihuang.shi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
rename vm_hw_logical_core_ids to vm_pcpu_ids
and changed the type to uint16_t.
V1->V2:rename the vm_hw_logical_core_ids
Signed-off-by: Huihuang Shi <huihuang.shi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
To minimize explicit casts, this patch adjusts the types of function parameters
and structure fields related to vlapic and update the types in the internal
implementation accordingly.
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
Acked-by: Dong Eddie <eddie.dong@intel.com>
like: constant of unsigned int need add U/UL as surfix.
enum value can't use to give or compare with int directlly.
unsigned and signed mis-matched
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
There are some integer type conversions reported by static
analysis tool for vcpu id, number of created vcpus, and
vpid, to reduce these type conversions, redesign vcpu id,
number of created vcpus, and vpid type as uint16_t as per
their usage, related 16-bit atomic operations shall be
added in HV.
MISRA C requires that all unsigned constants should have the suffix 'U'
(e.g. 0xffU), but the assembler may not accept such C-style constants.
Add 16-bit atomic add/dec/store operations;
Update temporary variables type and parameters type of
related caller;
Update vpid type as uint16_t;
Replace Macro with constant value for CPU_PAGE_SIZE.
Note: According to SDM A.10, there are some bits defined
in the IA32_VMX_EPT_VPID_CAP MSR to support the INVVPID
instruction, these bits don't mean actual VPID, so
the vpid field in the data struct vmx_capability doesn't
be updated.
V1--V2:
update comments for assembly code as per coding style;
Signed-off-by: Xiangyang Wu <xiangyang.wu@intel.com>
transfer num_vcpus,exp_num_vcpus to uint16_t.
transfer vm_hw_num_cores to uint16_t.
Signed-off-by: Huihuang Shi <huihuang.shi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
To follow the Misra-c standard, the assignment operation inside
function-like macro should be avoided. Replaced the violations
macro using inline function instead.
Signed-off-by: Yang, Yu-chu <yu-chu.yang@intel.com>
According to MISRA C:2012, suffix 'U/UL' shall be for
unsigned const value, the member of enum variable should
not be used to compare with integer variable.
Add 'U/UL' for unsigned const value in the CPU module;
Use Macro insteading of enum feature_word since the member
of feature_word is used to compare with integer variable;
Use hex number insteading of Macro in the assembly code.
V1-->V2:
Update the suffix of some constant value as 'UL'
according to its'storage variable;
Split MACRO updates used in the assembly code
in other patch.
Signed-off-by: Xiangyang Wu <xiangyang.wu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
MISRA C requires that all unsigned constants should have
the suffix 'U/UL'(e.g. 0xffU), but the assembler may not
accept such C-style constants.
To work this around, all unsigned constants must be
explicitly spells out in assembly with a comment tracking
the original expression from which the magic number is
calculated.
Signed-off-by: Xiangyang Wu <xiangyang.wu@intel.com>
IOAPIC pins always fit in 8-bit and we already use uint8_t for virt_pins. This
patch converts pins in vioapic to uint8_t.
This is based on Arindam's previous patch ("was: hv: Cleanup and optimise
vioapic.c"), with SOS boot failure resolved, format string updated, complex
arithmetic expression with implicit type conversion decoupled. Also make some
local variables representing interrupt vectors uint32_t.
Signed-off-by: Arindam Roy <arindam.roy@intel.com>
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
There are extra type conversion in the HV since cpu_id
type is uint32_t and the return value type of get_cpu_id
is uint16_t. BTW, the name of cpu_id is not clear enough
to express its usage.
So the following updates are made in this patch:
Update cpu_id type as unit_16 to reduce type casting;
Update related temporary variables type;
Update related print argument;
Change the input parameter name of interrupt_init as
cpu_id to keep align with function implement;
Rename cpu_id as pcpu_id as needed.
Signed-off-by: Xiangyang Wu <xiangyang.wu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
In the hypervisor, virtual cpu id is defined as "int" or "uint32_t"
type in the hypervisor. So there are some sign conversion issues
about virtual cpu id (vcpu_id) reported by static analysis tool.
Sign conversion violates the rules of MISRA C:2012.
BTW, virtual cpu id has different names (vcpu_id, cpu_id, logical_id)
for different modules of HV, its type is defined as "int" or "uint32_t"
in the HV. cpu_id type and logical_id type clean up will be done in
other patchs.
V1-->V2:
More clean up the type of vcpu id;
"%hu" is for vcpu id in the print function.
Signed-off-by: Xiangyang Wu <xiangyang.wu@intel.com>
Misra C required signed/unsigned conversion with cast.
V1->V2:
a.split patch to patch series
V2->V3:
a.change the uint64_t type numeric constant's suffix from U to UL
Signed-off-by: Huihuang Shi <huihuang.shi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
ioapic reset function will be called when doing guest reset.
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
To reduce type conversion in HV:
Update return type of function ffs64 and ffz64 as uint16;
For ffs64, when the input is zero, INVALID_BIT_INDEX is returned;
Update temporary variable type and return value check of caller
when it call ffs64 or ffz64;
Note: In the allocate_mem, there is no return value checking for
calling ffz64, this will be updated latter.
V1-->V2:
INVALID_BIT_INDEX instead of INVALID_NUMBER
Coding style fixing;
INVALID_CPU_ID instead of INVALID_PCPU_ID or INVALID_VCPU_ID;
"%hu" is used to print vcpu id (uint16_t);
Add "U/UL" for constant value as needed.
V2-->V3:
ffs64 return INVALID_BIT_INDEX directly when
the input value is zero;
Remove excess "%hu" updates.
V3-->V4:
Clean up the comments of ffs64;
Add "U" for constant value as needed.
Signed-off-by: Xiangyang Wu <xiangyang.wu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
There are multiple helpers for collecting info to be printed on the ACRN uart
console. They are unreachable code in release builds in which the uart console
is removed.
To define a precise boundary for safety-related activities, this patch wraps the
declarations and definitions to these helpers with "#ifdef HV_DEBUG" so that
these unreachable APIs will be dropped in release builds.
v1 -> v2:
* Fix coding style: no empty lines between #ifdef and the wrapped code.
* Also drop get_rte_info() in ioapic.c, which is solely used by
get_ioapic_info().
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Similar to cr0/4:
- use context->vmx_ia32_pat to save/restore VMX_GUEST_IA32_PAT field
- use context->ia32_pat to keep track the guest' view of IA32_PAT MSR
Signed-off-by: Zide Chen <zide.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Preparing for emulating guest's CR0.CD and CR0.NW bits:
- Intercept both rdmsr and wrmsr for IA32_PAT
- Track guest's IA32_PAT MSR with vcpu.arch_vcpu.contexts.ia32_pat
Signed-off-by: Zide Chen <zide.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
We define attr.name in struct vm and named as ("vm_%d", attr.id). attr.name only
be used in debug tool vm_list. It does't deserve to do so in OS created flow
(aka function create_vm). It's better to handle this in vm_list tool.
Signed-off-by: Kaige Fu <kaige.fu@intel.com>
Acked-by: Eddie Dong <eddie.dong@inte.com>
operations
For reducing sign conversion in hypervisor:
Update parameters of bitmap operations as unsigned type;
Update the input of related caller as unsigned type when the
caller's input parameter is const variable or the variable is
only used by bitmap operations.
V1-->V2:
(1) Explicit casting for the first parameter
of all bitmap operations;
(2) Remove mask operation for explicit casting
of all bitmap operations, since masking is
useless. Otherwise, this trucation is dangerous.
V2-->V3:
(1) Explicit casting for all bitmap operations parameter;
(2) Masking bit offset with 6-bit;
(3) Add few comments about bit offset.
V3-->V4:
add '\' for some statement of bitmap macro
Signed-off-by: Xiangyang Wu <xiangyang.wu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The struct member types should be transfer to non-basic types,
chaned it to length-prefix(uint32_t,int32_t ...) type.
Signed-off-by: Huihuang Shi <huihuang.shi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The local variable type should be transfer to non-basic type,
chaned it to length-prefix(uint32_t,int32_t ...) type.
Char *type or char array type which used to pointer a string
will be keeped.
V1->V2 add extra comments.
Signed-off-by: Huihuang Shi <huihuang.shi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
ACRN needs to trap the pm1a/pm1b written/read from VM0. So we
could know when should we put the system to S3.
We will have two path back to VM0:
- S3 enter/exit sucess. Will reset VM0 and jump to VM0 wakeup vec
with real mode
- S3 enter/exit failed. Will return to the next instruction of
pm1a/pm1b register writing. VM0 will read the pm1a/pm1b evt
register to check whether it's waked up or not.
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Emulate VM0 resume from S3 state:
- reset BSP of VM0
- set the BSP entry to saved VM0 wakeup vec and set BSP to real mode
- start BSP
To match trampoline_spinlock release on ACRN Sx resume path, acquire
trampoline_spinlock if ACRN Sx enter fails.
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Couple of small changes merged in this change:
- export main_entry, trampoline_spinlock and stop_cpus.
- change vm_resume() name to resume_vm()
- change resume_console_enable() name to resume_console()
- extend reset_vcpu to reset more fields of vcpu
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
We will add host_pm.h for ACRN power manager header file.
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The for loop statement should work in both & and &&, but it seems
make more sense to have && when executing a condtion.
Signed-off-by: Yang, Yu-chu <yu-chu.yang@intel.com>
It could be also used by host as well. So we remove GUEST from
MACRO name
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Eddie Dong <Eddie.dong@intel.com>
Update the structure definition to define the address type
(HVA vs HPA vs GPA) explicitly.
Convert address to HVA before access the GPA/HPA type of address.
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
In the hypervisor, physical cpu id is defined as "int" or "uint32_t"
type in the hypervisor. So there are some sign conversion issues
about physical cpu id (pcpu_id) reported by static analysis tool.
Sign conversion violates the rules of MISRA C:2012.
In this patch, define physical cpu id as "uint16_t" type for all
modules in the hypervisor and change related codes. The valid
range of pcpu_id is 0~65534, INVALID_PCPU_ID is defined to the
invalid pcpu_id for error detection, BROADCAST_PCPU_ID is
broadcast pcpu_id used to notify all valid pcpu.
The type of pcpu_id in the struct vcpu and vcpu_id is "int" type,
this will be fixed in another patch.
V1-->V2:
* Change the type of pcpu_id from uint32_t to uint16_t;
* Define INVALID_PCPU_ID for error detection;
* Define BROADCAST_PCPU_ID to notify all valid pcpu.
V2-->V3:
* Update comments for INVALID_PCPU_ID and BROADCAST_PCPU_ID;
* Update addtional pcpu_id;
* Convert hexadecimals to unsigned to meet the type of pcpu_id;
* Clean up for MIN_PCPU_ID and MAX_PCPU_ID, they will be
defined by configuration.
Note: fix bug in the init_lapic(), the pcpu_id shall be less than 8,
this is constraint by implement in the init_lapic().
Signed-off-by: Xiangyang Wu <xiangyang.wu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
- when init, cr0 & cr4 should read from VMCS
- when world switch, cr0/cr4 read shadow should also be save/restore
v2:
- use context->vmx_cr0/cr4 to save/restore VMX_GUEST_CR0/CR4
- use context->cr0/cr4 to save/restore VMX_CR0/CR4_READ_SHADOW
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
MISRA C required that return value should be used, missing for it should
add "(void)" prefix before the function call.
Some function can be declared without return value to avoid this problem.
Signed-off-by: Huihuang Shi <huihuang.shi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This change is to fix a guest vm hang issue at vm reset, especially easy to
be seen when it's a watchdog timeout reset.
vlapic_init create and init vlapic.vlapic_timer without deleting the
timer from cpu_times list, which breaks the list, results in a timer remains
with callback points to an invalid location.
Acked-by: Eddie Dong <eddie.dong@intel.com>
Signed-off-by: Yan, Like <like.yan@intel.com>
The pm S state data is from host ACPI info and needed for S3/S5
implementation.
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Currently irq and vector numbers are used inconsistently.
* Sometimes vector or irq ids is used in bit operations, indicating
that they should be unsigned (which is required by MISRA C).
* At the same time we use -1 to indicate an unknown irq (in
common_register_handler()) or unavailable irq (in
alloc_irq()). Also (irq < 0) or (vector < 0) are used for error
checking. These indicate that irq or vector ids should be signed.
This patch converts irq and vector numbers to unsigned 32-bit integers, and
replace the previous -1 with IRQ_INVALID or VECTOR_INVALID. The branch
conditions are updated accordingly.
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
emalloc_for_low_mem() is used if CONFIG_EFI_STUB is defined.
e820_alloc_low_memory() is used for other cases
In either case, the allocated memory will be marked with E820_TYPE_RESERVED
Signed-off-by: Zheng, Gen <gen.zheng@intel.com>
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Signed-off-by: Zide Chen <zide.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Acked-by: Xu, Anthony <anthony.xu@intel.com>
- vm_gva2gpa is same as gva2gpa, so replace it with gva2gpa directly.
- remove dead usage of vm_gva2gpa in emulate_movs.
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
there are data transfer between guest virtual space(GVA) & hv(HVA), for
example, guest rip fetching during instruction decoding.
GVA is address continuous, but its GPA could be only 4K page address
continuous, this patch adds copy_from_gva & copy_to_gva functions by
doing page walking of GVA to avoid address breaking during accessing GVA.
v2:
- modify API interface based on new gva2gpa function, err_code added
- combine similar code with inline function _copy_gpa
- change API name from vcopy_from/to_vm to copy_from/to_gva
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Linux commit edfe63ec97ed ("x86/mtrr: Fix Xorg crashes in Qemu sessions")
disables PAT feature if MTRR is not enabled. This patch does partial
emulation of MTRR to prevent this from happening: enable fixed-range
MTRRs and disable virable range MTRRs
By default IA32_PAT MSR (SDM Vol3 11.12.4, Table 11-12) doesn't include
'WC' type. If MTRR is disabled from the guests, Linux doesn't allow
writing IA32_PAT MSR so WC type can't be enabled. This creates some
performance issues for certian applications that rely on WC memory type.
Implementation summary:
- Enable MTRR feature: MTRRdefType.E=1
- Enable fixed range MTRRs: MTRRCAP.fix=1, MTRRdefType.FE=1
- For simplicity, disable variable range MTRRs: MTRRCAP.vcnt=0.
It's expected that this bit is honored by the guests and they won't
change the guest memory type through variable MTRRs.
Signed-off-by: bliu11 <baohong.liu@intel.com>
Signed-off-by: Zide Chen <zide.chen@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Per performance consideration, we don't flush vcpu context when doing
vcpu swithing (because it's only swithing between vcpu and idle).
But when enter S3, we need to call vmclear against all vcpus attached
to APs. We need to know which vcpu is attached with which pcpu.
This patch introduced API to get vcpu mapped to specific pcpu.
Signed-off-by: Yin Fegnwei <fengwei.yin@intel.com>
Acked-by: Eddie Dong <Eddie.dong@intel.com>
current_vcpu is not correct when there are multi vcpus in one VM,
using it is in-correct, so remove it.
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Enable VMX vpid ctrl and assign an unique vpid to each vcpu
so that VMX transitions are not required to invalidate any
linear mappings or combined mappings.
SDM Vol 3 - 28.3.3.3
If EPT is in use, the logical processor associates all mappings
it creates with the value of bits 51:12 of current EPTP.
If a VMM uses different EPTP values for different guests, it may
use the same VPID for those guests. Doing so cannot result in one
guest using translations that pertain to the other.
In our UOS, the trusty world and normal world are using different
EPTP. So we can use the same VPID for it.
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
We need know which tlb to flush: ept or vpid.
1. error handle for invept.
it's the same with invvpid error handle.
change its name to compatible with vpid.
2. the macro name for flush ept tlb request.
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
In current implementation, on sbl platform, vm0 bsp
starts from 64bit mode. And hv need to prepare init
page table for it.
In this patch series, on sbl platform, vm0 bsp starts
from non-paging protected mode.
This patch prepares an init gdt for vm0 bsp on sbl
platform.
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Acked-by: Xu, Anthony <anthony.xu@intel.com>
Translate gva2gpa in different paging modes.
Change the definition of gva2gpa.
- return value for error status
- Add a parameter for error code when paging fault.
Change the definition of vm_gva2gpa.
- return value for error status
- Add a parameter for error code when paing fault.
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Xu, Anthony <anthony.xu@intel.com>
Use # of paging level to identify paging mode
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
Acked-by: Xu, Anthony <anthony.xu@intel.com>
vm_attr_name, vm_state_info_privilege & vm_created are not used
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Xu, Anthony <anthony.xu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
vm_state_info in struct vm_arch is not used, remove it
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Xu, Anthony <anthony.xu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
When we create an UOS, we didn't indicate the vmid.
Thus we can't get the vm description for the vm
description array.
Instead we use a temporary vm description to save data to
fill the vm structure when crate an UOS. It's uselesss once
UOS has created. So we don't need to maintain vm description
array here for UOS.
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
use func vcpu_queue_exception for vcpu_inject_gp and exception_vmexit_handler.
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Tian, Kevin <kevin.tian@intel.com>
the pending_intr is not only serving for interrupt but also for different
request including TLB & TMR updating, so change the function & variants
name accordingly.
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
there are data transfer between guest(GPA) & hv(HPA), especially for
hypercall from guest.
guest should make sure these GPAs are address continous, but hv cannot
assure HPAs which mapped to these GPAs are address continous, for example,
after enable hugetlb, a contious GPA range could come from two different
2M pages.
this patch is handling such case by doing gpa page walking during
copy_from_vm & copy_to_vm.
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Changes:
1. Move io request related functions from hypercall.c to io_request.c
since they are not hypercalls;
2. Remove acrn_insert_request_nowait() as it is never used;
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
allocated all pcpus to vm0 to handle possible AP wakeup flow for all cpus,
as we pass org ACPI table to VM0 - that means VM0 can see all CPUs.
SOS(VM0) start expected CPUs through "maxcpus=" kernel cmdline option.
During first hypercall from SOS, calling vm_fixup to free un-expect-enabled
vcpus from VM0.
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Xu, Anthony <anthony.xu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Add vlapic_create_timer/vlapic_reset_timer to setup/reset a timer.
Add vlapic_update_lvtt to disarm timer when mode changes.
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
V2->V3: Fixed the booting issue on MRB board and removed the restriction
of allocate memory from address 0
1) Fix the booting from MRB issue
-#define CONFIG_LOW_RAM_SIZE 0x000CF000
+#define CONFIG_LOW_RAM_SIZE 0x00010000
2) changed e820_alloc_low_memory() to handle corner case of unaligned e820 entries
and enable it to allocate memory at address 0
+ a length = end > start ? (end - start) : 0;
- /* We don't want the first page */
- if ((length == size) && (start == 0))
- continue;
3) changed emalloc_for_low_mem() to enable to allocate memory at address 0
- /* We don't want the first page */
- if (start == 0)
- start = EFI_PAGE_SIZE;
V1->V2: moved e820_alloc_low_memory() to guest.c and added the logic to
handle unaligned E820 entries
emalloc_for_low_mem() is used if CONFIG_EFI_STUB is defined.
e820_alloc_low_memory() is used for other cases
In either case, the allocated memory will be marked with E820_TYPE_RESERVED
Signed-off-by: Zheng, Gen <gen.zheng@intel.com>
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Signed-off-by: Zide Chen <zide.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong>
Acked-by: Xu, Anthony <anthony.xu@intel.com>
- rename it to 'io_shared_page' to keep consistent
with ACRN HDL foils.
- update related code that reference this data structure.
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
The patch add function in vhm hypercall to retrieve physical cx data
to VHM/DM.
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Kevin Tian <kevin.tian@intel.com>
Each VM would have its own Cx data, for now we copy it from boot_cpu_info.
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Kevin Tian <kevin.tian@intel.com>
Split pm.c from cpu_state_tbl.c to put guest power management related
functions, keep cpu_state_tbl.c to store host cpu state table and
related functions.
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Kevin Tian <kevin.tian@intel.com>
adding "hugepagesz=1G" and "hugepages=X" into SOS cmdline, for X, current
strategy is making it equal
e820_mem.total_mem_size -CONFIG_REMAIN_1G_PAGES
if CONFIG_REMAIN_1G_PAGES is not set, it will use 3 by default.
CONFIG_CMA is added to indicate using cma cmdline option for SOS kernel,
by default system will use hugetlb cmdline option if no CONFIG_CMA defined.
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Xu, Anthony <anthony.xu@intel.com>
1. exception vector and other information
can be extracted from 'VM-Exit Interrupt-Information'
field of VMCS only if bit31 (Valid) is set.
-Intel SDM 24.9.2, Vol3
2. Rename 'exit-interrupt_info' to 'idt_vectoring_info'
in 'struct vcpu_arch', which is consistent with
SDM 24.9.3, Vol3
3. 'IDT-vectoring information' in VMCS is 32bit
-Intel SDM 24.9.3, Vol3
Update the type of 'idt_vectoring_info' in
'struct vcpu_arch'from 'uint32_t' to 'uint64_t'.
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
SDM 24.9.1 Volume3:
- 'Exit reason' field in VMCS is 32 bits.
SDM 24.9.4 in Volume3
- 'VM-exit instruction length' field
in VMCS is 32 bits.
This patch is to redefine the data types of above fields
in 'struct vcpu_arch' and udpate the code using these
two fields.
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
This address maybe invalid if a hostile address was set
in hypercall 'HC_SET_IOREQ_BUFFER'.it should be validated
before using.
Update:
-- save HVA to guest OS's request buffer in hyperviosr
-- change type of 'req_buf' from 'uint64_t' to 'void *'
-- remove HPA to HVA translation code when using this addr.
-- use error number instead of -1 when return error cases.
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Before this patch, guest temporary page tables were generated by hardcode
at compile time, HV will copy this page tables to guest before guest
launch.
This patch creates temporary page tables at runtime for the range of 0~4G,
and create page tables to cover new range(511G~511G+16M) with trusty
requirement.
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
eptp should be record as PA.
this patch changed nworld_eptp, sworld_eptp and m2p eptp to PA type,
necessary HPA2HVA/HVA2HPA transition is used for them after the change.
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The vm px info would be used for guest Pstate control.
Currently it is copied from host boot cpu.
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Kevin Tian <kevin.tian@intel.com>
this patch is a preparation for changing ptdev remapping entry from
virtual to physical based, it changes the ptdev_lock from per-vm to
global, as entries based on physical mode are global resource.
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
this patch is a preparation for changing ptdev remapping entry from
virtual to physical based, it changes the ptdev_list from per-vm to
global, as entries based on physical mode are global resource.
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Generate all common virtual cpuid entries for flexible support of
guest VCPUID emulation, by decoupling from PCPUID.
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Acked-by: Xu, Anthony <anthony.xu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Acked-by: Chen, Jason CJ <jason.cj.chen@intel.com>
microcode update from UOS is disabled.
microcode version checking is available for both SOS and UOS.
There are two TODOs of this patch:
1. This patch only update the uCode on pCPUs SOS owned. For the
pCPUs not owned by SOS, the uCode is not updated. To handle
this gap, we will have SOS own all pCPUs at boot time. So
all pCPUs could have uCode updated. This will be handled
in the patch to enable SOS own all pCPUs at boot time.
2. gva2gpa now doesn't check possible page table walk failure.
Will add the failure check in gva2gpa in different patch.
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Reviewed-by: Anthony Xu (anthony.xu@intel.com)
Acked-by: Eddie Dong <eddie.dong@intel.com>
Acked-by: Tian, Kevin <kevin.tian@intel.com>
this patch is to detect and enable only APICv features which
are actually supported by the processor, instead fo tuning on
all features by default.
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
this patch save native lapic configuration and restore it to vm0's vlapic
before its running, then doing hpet timer interrupt injection through vlapic
interface -- this will not mess up vlapic and we can see hpet
timer interrupt coming continuously.
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
1. refine multiboot related code, move to /boot.
2. firmware files and ramdisk can be stitched in iasImage;
and they will be loaded as multiboot modules.
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
add key info structure
add sworld_eptp in vm structure, and rename ept->nworld_eptp
add secure world control structure
Change-Id:
Tracked-On:220921
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
