This patch introduces vLAPIC state for a VM. The VM vLAPIC state can
be one of the following
* VM_VLAPIC_X2APIC - All the vCPUs/vLAPICs (Except for those in Disabled mode) of this
VM use x2APIC mode
* VM_VLAPIC_XAPIC - All the vCPUs/vLAPICs (Except for those in Disabled mode) of this
VM use xAPIC mode
* VM_VLAPIC_DISABLED - All the vCPUs/vLAPICs of this VM are in Disabled mode
* VM_VLAPIC_TRANSITION - Some of the vCPUs/vLAPICs of this VM (Except for those in Disabled mode)
are in xAPIC and the others in x2APIC
Upon a vCPU updating the IA32_APIC_BASE MSR to switch LAPIC mode, this
API is called to sync the vLAPIC state of the VM. Upon VM creation and reset,
vLAPIC state is set to VM_VLAPIC_XAPIC, as ACRN starts the vCPUs vLAPIC in
XAPIC mode.
Tracked-On: #3253
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This commit extract pm io handler registration code to register_pm_io_handler()
to reduce the cyclomatic complexity of create_vm() in order to be complied with
MISRA-C rules.
Tracked-On: #3227
Signed-off-by: Yan, Like <like.yan@intel.com>
When the lapic is passthru, vpic and vioapic cannot be used anymore. In
current code, user can still inject vpic interrupt to Guest OS, this is
not allowed.
This patch remove the vpic and vioapic initiate functions during
creating VM with lapic passthru. But the APIs in vpic and vioapic are
called in many places, for these APIs, follow the below principles:
1. For the APIs which will access uninitiated variables, and may case
hypervisor hang, add @pre to make sure user should call them after vpic or
vioapic is initiated.
2. For the APIs which only return some static value, do noting with them.
3. For the APIs which user will called to inject interrupt, such as
vioapic_set_irqline_lock or vpic_set_irqline, add condition in these
APIs to make sure it only inject interrupt when vpic or vioapic is
initiated. This change is to make sure the vuart or hypercall need not
to care whether lapic is passthru or the vpic and vioapic is initiated
or not.
Tracked-On: #3227
Signed-off-by: Conghui Chen <conghui.chen@intel.com>
The vcpu num could be calculated based on pcpu_bitmap when prepare_vcpu()
is done, so remove this redundant configuration item;
Tracked-On: #3214
Signed-off-by: Victor Sun <victor.sun@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Previously multiboot mods[0] is designed for kernel module for all
pre-launched VMs including SOS VM, and mods[0].mm_string is used
to store kernel cmdline. This design could not satisfy the requirement
of hybrid mode scenarios that each VM might use their own kernel image
also ramdisk image. To resolve this problem, we will use a tag in
mods mm_string field to specify the module type. If the tag could
be matched with os_config of VM configurations, the corresponding
module would be loaded;
Tracked-On: #3214
Signed-off-by: Victor Sun <victor.sun@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Add vuart_deinit to vm shutdown so that the vuart resource can be
reset, and when the Guest VM restart, it could have right state.
Tracked-On: #2987
Signed-off-by: Conghui Chen <conghui.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Build EPT entries for SGX EPC resource for VMs.
- SOS: EPC resrouce will be removed from EPT of SOS, don't support SGX virtualization for SOS.
- Non-SOS: build ept mapping for EPC resource for guest.
Guest base address and size is specified in vm configuration.
Tracked-On: #3179
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
When we call reset_vm() function to reset vm, the vm state
should be reset to VM_CREATED as well.
Tracked-On: #3182
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
In current code, vpci do the pci enumartion and add pci devices to the
context table of iommu.
Need to enable iommu DMA address translation later than vpci init.
Otherwise, in UEFI platform, there will be a shot time that address translation
is enabled, but the context table is not setup.
For the devices active in UEFI environment will have problem on address translation.
Tracked-On: #3160
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
filter out prelaunched vm memory from e820 table
and unmap prelaunched vm memory from ept table
before boot service OS
Tracked-On: #3148
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
- add the GUEST_FLAG_HIGHEST_SEVERITY flag to indicate that the guest has
privilege to reboot the host system.
- this flag is statically assigned to guest(s) in vm_configurations.c in
different scenarios.
- implement reset_host() function to reset the host. First try the ACPI
reset register if available, then try the 0xcf9 PIO.
Tracked-On: #3145
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Signed-off-by: Zide Chen <zide.chen@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
ACRN supports LAPIC emulation for guests using x86 APICv. When guest OS/BIOS
switches from xAPIC to x2APIC mode of operation, ACRN also supports switching
froom LAPIC emulation to LAPIC passthrough to guest. User/developer needs to
configure GUEST_FLAG_LAPIC_PASSTHROUGH for guest_flags in the corresponding
VM's config for ACRN to enable LAPIC passthrough.
This patch does the following
1)Fixes a bug in the abovementioned feature. For a guest that is
configured with GUEST_FLAG_LAPIC_PASSTHROUGH, during the time period guest is
using xAPIC mode of LAPIC, virtual interrupts are not delivered. This can be
manifested as guest hang when it does not receive virtual timer interrupts.
2)ACRN exposes physical topology via CPUID leaf 0xb to LAPIC PT VMs. This patch
removes that condition and exposes virtual topology via CPUID leaf 0xb.
Tracked-On: #3136
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
now only SOS need decide boot with de-privilege or direct boot mode, while
for other pre-launched VMs, they should use direct boot mode.
this patch merge boot/guest/direct_boot_info.c &
boot/guest/deprivilege_boot_info.c into boot/guest/vboot_info.c,
and change init_direct_vboot_info() function name to init_general_vm_boot_info().
in init_vm_boot_info(), depend on get_sos_boot_mode(), SOS may choose to init
vm boot info by setting the vm_sw_loader to deprivilege specific one; for SOS
using DIRECT_BOOT_MODE and all other VMS, they will use general_sw_loader as
vm_sw_loader and go through init_general_vm_boot_info() for virtual boot vm
info filling.
this patch also move spurious handler initilization for de-privilege mode from
boot/guest/deprivilege_boot.c to boot/guest/vboot_info.c, and just set it in
deprivilege sw_loader before irq enabling.
Changes to be committed:
modified: Makefile
modified: arch/x86/guest/vm.c
modified: boot/guest/deprivilege_boot.c
deleted: boot/guest/deprivilege_boot_info.c
modified: boot/guest/direct_boot.c
renamed: boot/guest/direct_boot_info.c -> boot/guest/vboot_info.c
modified: boot/guest/vboot_wrapper.c
modified: boot/include/guest/deprivilege_boot.h
modified: boot/include/guest/direct_boot.h
modified: boot/include/guest/vboot.h
new file: boot/include/guest/vboot_info.h
modified: common/vm_load.c
modified: include/arch/x86/guest/vm.h
Tracked-On: #1842
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
- post-launched RTVM: intercept both PIO ports so that hypervisor has a
chance to set VM_POWERING_OFF flag.
- all other type of VMs: deny these 2 ports from guest access so that
guests are not able to reset host.
Tracked-On: #2700
Signed-off-by: Zide Chen <zide.chen@intel.com>
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
For prelaunched VM, Service OS and postlaunched RT VM, we only need the vRTC
provides backed-up date, so we could use the simple vRTC which implemented
in hypervisor. For postlaunched VM (which is not a RT VM), we needs the device
module to emulate the vRTC for it.
Tracked-On: #1842
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Reviewed-by: Yu Wang <yu1.wang@intel.com>
The interface struct & API changes like below:
struct uefi_context->struct depri_boot_context
init_firmware_operations()->init_vboot_operations()
init_firmware()->init_vboot()
firmware_init_irq()->init_vboot_irq()
firmware_get_rsdp()->get_rsdp_ptr()
firmware_get_ap_trampoline()->get_ap_trampoline_buf()
firmware_init_vm_boot_info()->init_vm_boot_info()
Tracked-On: #1842
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
currently, ACRN hypervisor can either boot from sbl/abl or uefi, that's
why we have different firmware method under bsp & boot dirs.
but the fact is that we actually have two different operations based on
different guest boot mode:
1. de-privilege-boot: ACRN hypervisor will boot VM0 in the same context as
native(before entering hypervisor) - it means hypervisor will co-work with
ACRN UEFI bootloader, restore the context env and de-privilege this env
to VM0 guest.
2. direct-boot: ACRN hypervisor will directly boot different pre-launched
VM(including SOS), it will setup guest env by pre-defined configuration,
and prepare guest kernel image, ramdisk which fetch from multiboot modules.
this patch is trying to:
- rename files related with firmware, change them to guest vboot related
- restruct all guest boot stuff in boot & bsp dirs into a new boot/guest dir
- use de-privilege & direct boot to distinguish two different boot operations
this patch is pure file movement, the rename of functions based on old assumption will
be in the following patch.
Changes to be committed:
modified: ../efi-stub/Makefile
modified: ../efi-stub/boot.c
modified: Makefile
modified: arch/x86/cpu.c
modified: arch/x86/guest/vm.c
modified: arch/x86/init.c
modified: arch/x86/irq.c
modified: arch/x86/trampoline.c
modified: boot/acpi.c
renamed: bsp/cmdline.c -> boot/cmdline.c
renamed: bsp/firmware_uefi.c -> boot/guest/deprivilege_boot.c
renamed: boot/uefi/uefi_boot.c -> boot/guest/deprivilege_boot_info.c
renamed: bsp/firmware_sbl.c -> boot/guest/direct_boot.c
renamed: boot/sbl/multiboot.c -> boot/guest/direct_boot_info.c
renamed: bsp/firmware_wrapper.c -> boot/guest/vboot_wrapper.c
modified: boot/include/acpi.h
renamed: bsp/include/firmware_uefi.h -> boot/include/guest/deprivilege_boot.h
renamed: bsp/include/firmware_sbl.h -> boot/include/guest/direct_boot.h
renamed: bsp/include/firmware.h -> boot/include/guest/vboot.h
modified: include/arch/x86/multiboot.h
Tracked-On: #1842
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Replace the vm state VM_STATE_INVALID to VM_POWERED_OFF.
Also replace is_valid_vm() with is_poweroff_vm().
Add API is_created_vm() to identify VM created state.
Tracked-On: #3082
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
IRTE is freed if ptirq entry is released from remove_msix_remapping() or
remove_intx_remapping(). But if it's called from ptdev_release_all_entries(),
e.g. SOS shutdown/reboot, IRTE is not freed.
This patch adds a release_cb() callback function to do any architectural
specific cleanup. In x86, it's used to release IRTE.
On VM shutdown, vpci_cleanup() needs to remove MSI/MSI-X remapping on
ptirq entries, thus it should be called before ptdev_release_all_entries().
Tracked-On: #2700
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Signed-off-by: Zide Chen <zide.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Rename structure acrn_vm_type to acrn_vm_load_order as it is used to
indicate the load order instead of the VM type.
Tracked-On: #2291
Signed-off-by: Conghui Chen <conghui.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The name NORMAL_VM does not clearly reflect the attribute that these VMs
are launched "later". POST_LAUNCHED_VM is closer to the fact
that these VMs are launched "later" by one of the VMs launched by ACRN.
Tracked-On: #3034
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
If the vmcall param passed from guest is representing a vmid, we should
make sure it is a valid one because it is a pre-condition of following
get_vm_from_vmid(). And then we don't need to do NULL VM pointer check
in is_valid_vm() because get_vm_from_vmid() would never return NULL.
Tracked-On: #2978
Signed-off-by: Victor Sun <victor.sun@intel.com>
Reviewed-by: Yonghua Huang <yonghua.huang@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
There are 2 reasons why SOS ve820 has to be separated from host e820:
- in hybrid mode, SOS may not own all the host memory.
- when SOS is being re-launched, it needs an untainted version of host
e820 to create SOS ve820.
This patch creates sos_e820 table for SOS and keeps host e820 intact
during SOS creation.
Tracked-On: #2700
Signed-off-by: Zide Chen <zide.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
In previous code, only for pre-launched VM, hypervisor would create
vuart console for each VM. But for post-launched VM, no vuart is
created.
In this patch, create vuart according to configuration in structure
acrn_vm_config. As the new configuration is set for pre-launched VM and
post-launched VM, and the vuart initialize process is common for each
VM, so, remove CONFIG_PARTITION_MODE from vuart related code.
Tracked-On: #2987
Signed-off-by: Conghui Chen <conghui.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The guest flags of GUEST_FLAG_IO_COMPLETION_POLLING work for NORMAL_VM only;
Tracked-On: #2291
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This patch adds prefix 'p' before 'cpu' to physical cpu related functions.
And there is no code logic change.
Tracked-On: #2991
Signed-off-by: Kaige Fu <kaige.fu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The physical core of lapic_pt vm should be reset for security and
correctness when shutdown the vm.
Tracked-On: #2991
Signed-off-by: Kaige Fu <kaige.fu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Currently, the previous configurations about guest_flags set by DM will
not be cleared when shutdown the vm. Then it might bring issue for the
next dm-launched vm.
For example, if we create one vm with LAPIC_PASSTHROUGH flag and shutdown it.
Then the next dm-launched vm will has the LAPIC_PASSTHROUGH flag set no matter
whether we set it in DM.
This patch clears all the DM set flags when shtudown vm.
Tracked-On: #2991
Signed-off-by: Kaige Fu <kaige.fu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
- The target vm in most of hypercalls should be a NORMAL_VM, in some
exceptions it might be a SOS_VM, we should validate them.
- Please be aware that some hypercall might have limitation on specific
target vm like RT or SAFETY VMs, this leaves "TODO" in future;
- Unify the coding style:
int32_t hcall_foo(vm, target_vm_id, ...)
{
int32_t ret = -1;
...
if ((is_valid_vm(target_vm) && is_normal_vm(target_vm)) {
ret = ....
}
return ret;
}
Tracked-On: #2978
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
If launch two UOS with same UUID by acrn-dm, current code path will
return same VM instance to the acrn-dm, this will crash the two UOS.
Check VM state and make sure it's in VM_STATE_INVALID state before
creating a VM.
Tracked-On: #2984
Signed-off-by: Cai Yulong <yulongc@hwtc.com.cn>
In the presence of SOS, ACRN uses fallback_iommu_domain which is the same
used by SOS, to assign domain to devices during ACRN init. Also it uses
fallback_iommu_domain when DM requests ACRN to remove device from UOS domain.
This patch changes the design of assign/remove_iommu_device to avoid the
concept of fallback_iommu_domain and its setup. This way ACRN can commonly
treat pre-launched VMs bringup w.r.t. IOMMU domain creation.
Tracked-On: #2965
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
ACRN builds mptable for pre-launched VMs. It uses CONFIG_PARTITION_MODE
to compile mptable source code and related support. This patch removes
the macro and checks if the type of VM is pre-launched to build mptable.
Tracked-On: #2941
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Currently VM id of NORMAL_VM is allocated dymatically, we need to make
VM id statically for FuSa compliance.
This patch will pre-configure UUID for all VMs, then NORMAL_VM could
get its VM id/configuration from vm_configs array by indexing the UUID.
If UUID collisions is found in vm configs array, HV will refuse to
load the VM;
Tracked-On: #2291
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The code mixed the usage on term of UUID and GUID, now use UUID to make
code more consistent, also will use lowercase (i.e. uuid) in variable name
definition.
Tracked-On: #2291
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
For pre-launched VMs MSI/MSI-x configuration writes are not intercepted by ACRN.
It is pass-thru and interrupts land in ACRN and the guest vector is injected into
the VM's vLAPIC. With this patch, ACRN intercepts MSI/MSI-x config writes and take
the code path to remap interrupt vector/APIC ID as it does for SOS/UOS.
Tracked-On: #2879
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
After using get_vm_from_vmid(), vm pointer is always not NULL. But there are still many NULL pointer checks.
This commit replaced the NULL vm pointer check with a validation check which checks the vm status.
In addition, NULL check for pointer returned by get_sos_vm() and get_vm_config() is removed.
Tracked-On: #2520
Signed-off-by: Yan, Like <like.yan@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Add the default handlers for PIO and MMIO access which returns all
FFs on read and discards write. These default handlers are registered
when SOS VM or pre-launched VM is created.
v3 -> v4:
- use single layer if in hv_emulate_pio
- change the implementation of pio_default_read
v2 -> v3:
- use runtime vm type instead of CONFIG_PARTITION_MODE
- revise the pio/mmio emulation functions
- revise the pio/mmio default read functions according to MISRA C
- revise the commit message
v1 -> v2:
- add default handlers members in struct acrn_vm and add interfaces
to register default handlers for PIO and MMIO.
Tracked-On: #2860
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
When RTVM is trying to poweroff by itself, we use INIT to
kick vCPUs off the non-root mode.
For RTVM, only if vm state equal VM_POWERING_OFF, we take action to pause
the vCPUs with INIT signal. Otherwise, we will reject the pause request.
Tracked-On: #2865
Signed-off-by: Kaige Fu <kaige.fu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The virtual pm port of RTVM is intercepted by HV. But the HV needs to inform the DM as well.
So we will forward the virtual S5 request to DM too
The handler in HV just set the pm state flag (VM_POWERING_OFF) which indicate that the RTVM is powering
off by itself. Meanwhile, there are data resources in VHM and DM should be released once we handle the PM
of RTVM in HV. So, return to DM to go through the entire VM destroy cycles to release the resources.
During the cycles, the DM will try to pause vm through hypercall. In the hypercall handler in HV, we will
check the pm state flag. If it is set, pause all the vCPUs of the vm. Otherwise, reject the request.
In this way, we can make sure that RTVM can only trigger its s5 by itself. All
other S5 request from external will be rejected.
Here is sequence chart of RTVM s5.
poweroff
+-----------+ +----------+ +-----------+ +----------+
| vBSP | | vAPs | | HV | | DM |
+-----+-----+ +----------+ +-----+-----+ +-----+----+
| | | |
| Stop all other cpus | | |
+----------------------------+ | |
| | |Disable LAPIC | |
| +<-+ | |
| | | |
| +--+ | |
| | |HLT in | |
| All other cpus stopped | |non-root mode | |
+----------------------------+ | |
| Call ACPI method to enter s5 | |
+-------------------------+---------------------> | |
| | Set s5 flag | |
| | <---------------------+ |
| | APs paused | Re-inject IOREQ TO DM
| | +-------------------> +-------------------> +
| | | Pause VM |
| | Check S5 flag: | <-------------------+
| | - If set, pause vm | VM paused |
| | - If no, reject | +-----------------> +--+
| | | Destroy VM | |Deinit works
| | | <--------------------<-+
| | | VM destroyed |
| | | +-----------------> |
+ + + +
Tracked-On: #2865
Signed-off-by: Kaige Fu <kaige.fu@intel.com>
This patch checks if the GUEST_FLAG_RT is set when GUEST_FLAG_LAPIC_PASSTHROUGH is set.
If GUEST_FLAG_RT is not set while GUEST_FLAG_LAPIC_PASSTHROUGH is set, we will refuse
to boot the VM.
Meanwhile, this patch introduces a new API is_rt_vm.
Tracked-On: #2865
Signed-off-by: Kaige Fu <kaige.fu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
In hypervisor fuzzing test, hypervisor will hang
if issuing HV_VM_SET_MEMORY_REGIONS hypercall after
target VM is destroyed.
this patch is to fix above vulnerability.
Tracked-On: #2849
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Preparing for hybrid mode:
- create vE820 for pre-launched VMs and do other init code when the
vm_config->type is PRE_LAUNCHED_VM.
- create ve820.c for each board because without wrapping by
CONFIG_PARTITION_MODE, ve820_entry[] needs to be visible even when
compiling target boards that haven't enabled pre-launched VMs.
- remove create_prelaunched_vm_e820() from vm.c and implement board
specific function for each $(CONFIG_BOARD)/ve820.c. The reasons being:
- don't need to define ve820_entry[32] for those boards that don't
support pre-launched VMs.
- more importantly, this makes it much easier to create different per-VM
vE820 when it's needed.
Tracked-On: #2291
Signed-off-by: Zide Chen <zide.chen@intel.com>
Previously vrtc is for partition mode only, now enable it for sharing mode;
Tracked-On: #2291
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Remove vdev ops for sharing mode, directly call the corresponding functions
instead of calling the ops callbacks (indirectly)
Remove alloc_pci_vdev() and merge its code into init_vdev_for_pdev() to simplify code
Remove @pre for local variables
Change the return value from int32_t to void to comply with misra c and
add ASSERT in the functions (if necessary) to verify the assumptions for debug build:
vmsi_init
vmsix_init
vmsi_deinit
vmsix_deinit
Add @pre for vmsix_init_helper and make it a void function, use ASSERT to verify
the assumption for debug build.
Add ASSERT in get_sos_vm
Tracked-On: #2534
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Now we only configure "hide MTRR" explicitly to false for SOS. For other VMs,
we don't configure it which means hide_mtrr is false by default.
And remove global config MTRR_ENABLED
Tracked-On: #1842
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
The init page tables installed in either cpu_primary.S or trampoline.S
are 1:1 mapping and won't be changed in the future.
The 'actual' hypervisor page table installed in enable_paging() is 1:1
mapping currently but it could be changed in the future. Both hva2hpa() and
hpa2hva() are implemented based on these page tables and can't be used
when the init page tables take effect.
This patch does the following cleanup:
- remove all hva2hpa()/hpa2hva() before calling enable_paging()
- get_hv_image_base() returns HVA, not HPA. So add hva2hpa() for all cases
that are called afte enable_paging().
Tracked-On: #2700
Signed-off-by: Zide Chen <zide.chen@intel.com>
Acked-by: Eddie Dong <Eddie.dong@intel.com>
This patch mainly unifies init_vm_boot_info's implementation between SBL and
UEFI.
Tracked-On: #2708
Signed-off-by: Tw <wei.tan@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
In partition mode, unassign_iommu_device() is called from vpci_cleanup(),
so when shutdown_vm() is called, unassign_iommu_device() could fail because
of "domain id mismatch" and DMAR is not cleared.
Also move destroy_ept() after the call to destroy_iommu_domain().
Tracked-On: #2700
Signed-off-by: Zide Chen <zide.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Currently for pre-launched VMs, HV intends to do EPT mapping for all GPA
space, which implies that it wastes HPA to back PCI hole and other vE820
entries that are not backed by physical memory.
This patch solves this issue and fixes ve820 entries whose length is not
aligned to 4K, and changes the lowmem entry's start GPA from 1MB to 2MB.
Tracked-On: #2587
Signed-off-by: Zide Chen <zide.chen@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
- Do not refer vm_configs[] directly in vm module;
Tracked-On: #2291
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
- move sanitize_vm_config() from vm.c to vm_config.c;
- move get_vm_config() from vm.h to vm_config.h;
Tracked-On: #2291
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
When CAT is supported, UOS can setup acrn_vm_config.clos, to use CAT
feature. Eg.,
struct acrn_vm_config vm_configs[CONFIG_MAX_VM_NUM] = {
{
.guest_flags |= CLOS_REQUIRED,
.clos = 1,
},
};
sanitize_vm_config() will check if CAT is supported and
vm_configs.clos is valid.
Tracked-On: #2462
Signed-off-by: Tao Yuhong <yuhong.tao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
--move several uart API declarations from console.h to uart16550.h
--move several shell API declarations from console.h to shell.h
--add dbg_cmd.h, move 'handle_dbg_cmd' declaration from console.h
to dbg_cmd.h
--move debug/uart16550.h to include/debug/uart16550.h since some
uart APIs will be called by external files
Tracked-On: #1842
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
modified: arch/x86/guest/vm.c
modified: arch/x86/init.c
modified: bsp/uefi/cmdline.c
modified: debug/console.c
modified: debug/dbg_cmd.c
modified: debug/uart16550.c
modified: debug/vuart.c
modified: hw/pci.c
modified: include/arch/x86/multiboot.h
modified: include/debug/console.h
new file: include/debug/dbg_cmd.h
new file: include/debug/shell.h
renamed: debug/uart16550.h -> include/debug/uart16550.h
There are still some misra-c violations when CONFIG_PARTITION_MODE is defined.
arch/x86/configs:
- remove the unused macro: PRE_LAUNCH_VM_NUM
- pt_dev.c: VMx_CONFIG_PCI_PTDEV_NUM has been defined in partition_config.h,
should not hard code them again in pt_dev.c.
- ve820.c: use "UL" suffix instead of "U" for 64 bits variables.
vmid is uint16_t in ACRN, so vuart_vmid should be uint16_t as well.
Fix another few other miscellaneous misra-c violations.
Tracked-On: #861
Signed-off-by: Zide Chen <zide.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
merge E820_MAX_ENTRIES and NUM_E820_ENTRIES
to E820_MAX_ENTRIES.
Tracked-On: #1842
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
Removed the remaining reference of acrn vm from
inside of vtd.c.
Removed usage of snoopy_mem, and added code to achieve
the same using iommu_snoop.
Initialize iommu_snoop to true in create deault iommu.
Tracked-On: #2496
Signed-off-by: Arindam Roy <arindam.roy@intel.com>
This patch is a modified one. It removes the usage
of acrn_vm struct from inside vtd.c.
It also puts struct iommu_domain inside vtd.h,
from vtd.c.
It modifies the signature of init_iommu_domain
in order to remove dependency on acrn_vm from
inside vtd.c.
Incorporated comments from Jason and Eddie.
Changed the name of sos_vm_domain to
fallback_iommu_domain
Removed any reference of sos_vm from vtd.[c|h]
files, including comments.
Tracked-On: #2496
Signed-off-by: Arindam Roy <arindam.roy@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
-- now hypervisor.h is the universal set of header file,
this patch doesn't include hypervisor.h, only include
some necessary header files for vm.c and vm.h
-- move 'struct vcpuid_entry' from vm.h to vcpuid.h
-- remove dead code 'enum vm_privilege_level'
-- move 'enum vpic_wire_mode' from vm.h to vpic.h
Tracked-On: #1842
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Remove redundancy code since they are not used now.
-- remove 'max_ram_blk_base' & 'max_ram_blk_size' in
struct e820_mem_params
-- remove 'gpa_lowtop' in struct vm_hw_info
-- remove MACRO 'UOS_DEFAULT_START_ADDR'
Tracked-On: #1842
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
- add e820 info in struct acrn_vm;
- rename rebuild_sos_vm_e820() to create_sos_vm_e820();
- add create_prelaunched_vm_e820() for partition mode;
- rename create_e820_table() to create_zeropage_e820() and merge for
both sharing mode and partition mode;
- move create_xxx_vm_e820() to vm.c;
- move create_zeropage_e820() to vm_load.c;
Tracked-On: #2291
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
- move `vcpumask2pcpumask` from `guest.c` to `vcpu.c`
- move `prepare_sos_vm_memmap` from `guest.c` to `vm.c`
- rename `guest.c` to `guest_memory.c`
Tracked-On: #2484
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
1. in UEFI bsp code, not need UEFI macro; it is controlled in makefile.
2. in vm/acpi/interrupt code, unify the API name for SBL & UEFI.
3. remove unnecessary header including and unused code.
Tracked-On: #1842
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
-- move vm_pic() from vm.h to vpic.c since it is
only used in vpic.c
-- move vm_ioapic() from vm.h to vioapic.c
change vioapic_reset(struct acrn_vioapic *vioapic) -->
vioapic_reset(struct acrn_vm *vm)
then vm_vioapic() is only used in vioapic.c
-- move vm_vuart() from vm.h to vuart.c,
now this api is used in vuart.c and shell.c
Tracked-On: #1842
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
Add a API to sanitize vm_configs[] array, in this API, we will do sanity
check for VM configurations and refill some fields in vm_configs[]. If
sanity check is failed, the HV would reject to boot.
About pcpu_bitmap of SOS_VM:
We should not hard code pcpu_bitmap for SOS_VM, this is not convenient for
unconfigured boards. The pcpu_bitmap follows a very simple rule:
All physical CPUs except ocuppied by Pre-launched VMs are all belong to
SOS_VM. In this way, the pcpu_bitmap of a SOS_VM is decided by pcpu_bitmap
status in PRE_LAUNCHED_VMs.
To get the correct pcpu_bitmap of SOS_VM, We need to setup another rule, that
the vm_configs[] array should follow the order of PRE_LAUNCHED_VM - SOS_VM
strictly.
With this patch enabled, the pcpu_bitmap field of sos vm config is not needed
to configure;
Tracked-On: #2291
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Previously I/O emulation completion mode mode was configured in Kconfig:
config IOREQ_NOTIFICATION
bool "Notification mode"
help
When I/O request is completed, SOS will mark the completion status and
notify hypervisor via hypercall. Hypervisor will finish the post work
when notification is received.
config IOREQ_POLLING
bool "Polling mode"
help
When I/O request is completed, SOS will only mark completion status
without notifying hypervisor. Hypervisor will poll the completion
status and finish the post work.
Now move this configuration to guest_flags of acrn_vm_config struct.
if ((vm_config->guest_flags & IO_COMPLETION_POLLING) != 0U) {
I/O with polling;
} else {
I/O with notification;
}
Tracked-On: #2291
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The member of mem_size and start_hpa in acrn_vm_config struct will
be replaced with the acrn_vm_mem_config struct;
Tracked-On: #2291
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
For each vm_array[] item, its config is located in corresponding
index of vm_configs[], so vm_config pointer is not needed any more.
Tracked-On: #2291
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
All the legacy cpu configration in vm_description.c are all cleaned up;
Tracked-On: #2291
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
We will use guest_flags of SECURE_WORLD_ENABLED to check wthether
sworld is supported.
Tracked-On: #2291
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This patch creates a new get_sos_vm() api to replace get_vm_from_vmid(0U)
because VM 0 might not be SOS VM now;
Tracked-On: #2291
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The patch will show correct VM name per its configuration. As we do not
validate vm id when call get_vm_from_vmid() any more, we only show VM's
states which their VM type are defined;
If VM name is not configured in config file, then the name is specified
with vm id, i.e. "ACRN VM_(vm id)"
Tracked-On: #2291
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
When pcpu enter guest mode, it will call launch_vms() function to launch
VMs in global vm_configs array.
In launch_vms() function, current pcpu will go through vm_config array list
and check whether it is a bsp of configured VM, if yes then it will prepare
corresponding VM and start it. The index of vm_config array will be specified
to VM id.
The first least significant bit in pcpu_bitmap means the bsp of the VM.
Tracked-On: #2291
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Under sharing mode, VM0 is identical with SOS VM. But the coupling of
SOS VM and VM 0 is not friendly for partition mode.
This patch is a pure term change of vm0 to sos VM, it does not change
any code logic or senmantic.
Tracked-On: #2291
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
move this api from io_emul.c to vm.c to avoid reverse
dependency
Tracked-On: #1842
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
This patch is a pure term change of vm_description to vm_config,
the struct name of vm_description is changed to acrn_vm_config.
The patch does not change any code logic or senmantic.
Tracked-On: #2291
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
1. add static for local functions and variables.
2. move vm_sw_loader from vcpu to vm
3. refine uefi.c to follow the code rules.
4. separate uefi.c for vm0 boot and bsp two parts. bsp layer just
access native HW related, can't access vm/vcpu, vm0 boot part can
access vm / vcpu data structure.
Tracked-On: #1842
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
vuart it used for SOS to output log to HV console,
so if dbg uart is disabled, it need be disabled too:
just unregister its PIO.
Tracked-On: 2170
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
-- fix "more than one exit point" and "goto detected" violations
-- change prepare_vm0_memmap to void type
-- Add free_vm_id when create vm failed
Tracked-On: #861
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
-- fix MISRA-C violation "procedure has more than one exit point"
for this api
-- change start_vm to void type since it is always return 0
Tracked-On: #861
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Fix violation "procedure has more than one exit point"
for this api.
Tracked-On: #861
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
For security, this patch add one flag per vm and disable snoop control
for sos and enable snoop control for uos by default.
v2: add one flag in vm, not in iommu domain.
v3: add vm null check
Tracked-On: #2086
Signed-off-by: Zhipeng Gong <zhipeng.gong@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
1. change its APIs as more indepentent, and modify the callers' code
2. limit its global variables as static, and return const to the callers
3. remove unused code in "CONFIG_CMA"
Tracked-On: #1842
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
1. e820 is modulized as separated files.
2. move boot_regs into multiboot.h as it's related with
multiboot info header
Tracked-On: #1842
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
The function not used in extern c file, must add static.
Tracked-On: #861
Signed-off-by: Huihuang Shi <huihuang.shi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
replace CPU_PAGE_SIZE with PAGE_SIZE
These two MACROs are duplicated and PAGE_SIZE is a more reasonable name.
Tracked-On: #861
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The previous would reserve memory for trusty in SOS kernel. Howerer,
there would no available 16 MB continue memory any more after a long time.
This result in allocating memory for trusty failed. This patch will reserve
memory for trusty in ACRN hypervisor in which case the memory allocation
for trusty will never fail.
Tracked-On: #1942
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
IEC 61508,ISO 26262 standards highly recommend single-exit rule.
Reduce the count of the "return entries".
Fix the violations which is comply with the cases list below:
1.Function has 2 return entries.
2.The first return entry is used to return the error code of
checking variable whether is valid.
Fix the violations in "if else" format.
Tracked-On: #861
Signed-off-by: Huihuang Shi <huihuang.shi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This patch introduce a new mode of IO request completion, polling mode.
Now, the sketch of ioreq process can be,
A. UOS vcpu0 generate PIO/MMIO ->
B. pcpu1(vcpu0 of UOS) trap into HV ->
C. pcpu1 build ioreq, send IPI and enter idle ->
D.1 pcpu0(vcpu0 of SOS) response IPI,
D.2 pcpu0 handle the ioreq in HV, kernel, DM,
D.3 pcpu0 mark ioreq as complete,
D.4 pcpu0 hypercall to enter HV ->
E.1 pcpu0 send IPI to wake pcpu1 up
E.2 UOS vcpu0 continue running
With this change, it skips D.4, E.1 steps. In step C, pcpu1 will enter a
polling ioreq state idle after send out the IPI.
It can save about ~5000 cpu cycles.
In polling mode, we do the polling in idle instead of pause cpu all the
time. It will consume more power. A better way is to use monitor/mwait
instructions which can put cpu into a sleep state with monitoring a
memory address. Unfortunately, APL has bug with monitor. We can gather
all ioreqs state into one monitorable memory and take advantage of
monitor/mwait for future platform.
The way polling or notification is per VM. We can config VMs in
different mode. By default, IO request completion will use notification
mode for all VMs. We can switch it by Kconfig.
Tracked-On: #1821
Signed-off-by: Shuo Liu <shuo.a.liu@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
In current code, DMA remapping is enabled at very early stage, when there is no
device added.
Devices are added to VT-d context table when creating VMs.
There is potential risk that there may be device DMA transactions when DMA remapping is
enabled, but the device is not added to the VT-d context table. (Eg. this could happen in UEFI
enviroment when USB keyboard use in efi intenal shell.)
This patch defers DMA remapping enabling until vm creation.
Tracked-On: #1855
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
ioreqs acrossing VM reset is meaningless. So we reset their status when
VM reset.
Please note, device model and service os need to handle various ioreqs
pending status in emergency reset condition carefully. Otherwises, the
post processing of such ioreqs might overwrite this reset.
Tracked-On: projectacrn#1821
Signed-off-by: Shuo Liu <shuo.a.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Even in partition mode, we also need to clear vmid in vmid_bitmap to
indicate the VM is not present.
Tracked-On: projectacrn#1821
Signed-off-by: Shuo Liu <shuo.a.liu@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
fix the following integer violations:
1. Signed/unsigned conversion without cast
2. Literal value requires a U suffix
3. Implicit conversion of underlying type
v3 -> v4:
* change the type of npk_loglevel/mem_loglevel/console_loglevel
from uint32_t to uint16_t
v2 -> v3:
* discard the return value of update_ept
* discard changes related to npk loglevel
v1 -> v2:
* remove the unnecessary changes related to the false positive
issues caused by scanning tool
* change the type of the local variable 'vlapic_id' from uint8_t
to uint32_t in function 'vlapic_build_id'
* change the type of the struct member 'flags' in shared_buf from
uint64_t to uint32_t
Tracked-On: #861
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
-- Config MAX_EMULATED_MMIO_REGIONS 16 in Kconfig
-- Add emulated mmio array and emulated mmio regions
in vm structure
-- Remove mmio list in vm structure
-- Remove unregister_mmio_emulation_handler and
vioapic_cleanup APIs
Tracked-On: #861
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
-- Add emulated port io index
-- Add emulated pio array in vm structure
-- Remove port list in vm structure
-- Remove free_io_emulation_resource/register_io_handler/
create_io_handler APIs
v2-->v3:
-- not add 'is_emulated', check len == 0U
-- Check if io_read/io_write handler is NULL before calling
-- Replace ENUM with MACRO for emulated pio index to avoid
MISRA-C violations
v1-->v2:
-- Remove EMUL_PIO_NUM in Kconfig, add emulated pio index
for PIC/PCI/UART/RTC/PM
Tracked-On: #861
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
MISRA-C requires that the controlling expression of an if statement or
an iteration-statement shall be Boolean type.
v1 -> v2:
* update the U suffix of constant to let the type of operands
to bit operations (&) is the same.
* update the type of 'i' from uint64_t to uint16_t in
'profiling_set_control' since it is limited by phys_cpu_num,
which is uint16_t.
Tracked-On: #861
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
It is not necessary to use atomic operation to
set the initial value for 'created_vcpu' in vm structure.
Tracked-On: #861
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
For data structure types "struct vm", its name is identical
with variable name in the same scope. This is a MISRA C violation.
Naming convention rule:If the data structure type is used by multi
modules, its corresponding logic resource is exposed to external
components (such as SOS, UOS), and its name meaning is simplistic
(such as vcpu, vm), its name needs prefix "acrn_".
The following udpates are made:
struct vm *vm-->struct acrn_vm *vm
Tracked-On: #861
Signed-off-by: Xiangyang Wu <xiangyang.wu@linux.intel.com>
For data structure types "struct vcpu", its name is identical
with variable name in the same scope. This is a MISRA C violation.
Naming convention rule:If the data structure type is used by multi
modules, its corresponding logic resource is exposed to external
components (such as SOS, UOS), and its name meaning is simplistic
(such as vcpu, vm), its name needs prefix "acrn_".
The following udpates are made:
struct vcpu *vcpu-->struct acrn_vcpu *vcpu
Tracked-On: #861
Signed-off-by: Xiangyang Wu <xiangyang.wu@linux.intel.com>
Replace dynamic memory allocation in memory management with static memory allocation.
Since the static memory allocation can guarantee the allocation never failed, so
split_large_page and construct_pgentry don't need to return a errno any more.
Besides, the destroy_ept don't need to free page any more. Instead, it would memset
the eptp to 0 to make sure we can't walk this paging table again.
Tracked-On: #861
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Currently we compare vcpu_id with phys_cpu_num,
vcpu_id is not related with phys_cpu_num,
this patch cleanup them.
Tracked-On: #861
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Li, Fei1 <fei1.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
guest software loading is per VM instead of vcpu. So we move it
from prepare_vcpu to prepare_vm. And make sure it's called for
all VMs for partition mode.
Tracked-On: #1565
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
There's no need to walk these paging tables to transfer HPA to GPA
for a VM, so remove it.
Tracked-On: #1124
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Pointer param should be declared pointer to const if
the parameter is keeped read-only.
This patch changes pointer param whose name is vm.
Tracked-On:#861
Signed-off-by: Huihuang Shi <huihuang.shi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Move vcpu mode set to function vcpu_set_regs.
Tracked-On: #1231
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
For UOS, there is no BSP init state saved in hv. We always need
DM to set BSP init state by using hypercall. So we can't auto
start vm during vm reset.
Tracked-On: #1231
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Now, we make UOS to set BSP init state by using hypercall. We
could drop the old UOS loader in HV and make vm loader in HV
only for SOS.
Tracked-On: #1231
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
NOTE: this patch is only workaround patch for UOS BSP state init.
Eventually, the DM will call hypercall to init UOS BSP state.
We use this workaround patch here to simplify the init_guest_state.
Will make the caller of init_guest_state calls init_guest_vmx
directly.
Tracked-On: #1231
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
With reset_vcpu_regs as pre-condition, we only need to set
cs_selector and cs_base for AP.
We call set_ap_entry in two places:
1. When emulation AP SIPI
2. When sos BSP resume from S3. The BSP is resumed to real
mode with entry set to wakeup_vec. We call set_ap_entry
API here with entry twisted from wakeup_vec.
Tracked-On: #1231
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
If defined CONFIG_VM0_DESC, HV will use predefined vm0_desc
to config VM0,now it is unneccessary, then remove these code.
Tracked-On: #861
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Li, Fei1 <fei1.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
- add missing brackets for 'if/else' statements based on MISRA-C
requirements
v1 -> v2:
* add brackets for each conditions in 'if' statements to improve
the readability
* modify 'ptdev_init' to make the logic clearer
Tracked-On: #861
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Loop the global vm_array[] instead of the vm_list.
Tracked-On: #861
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
-- Replace dynamic memory allocation with static memory
-- Remove the parameter check if the vm is NULL
Tracked-On: #861
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This patch is to enhance the feature of "interrupt storm
mitigation"; when interrupt storm happens on one UOS
it should keep as smaller effect to SOS as possible.
Add variables in PTdev entry & VM, used to record one
UOS's pass-thru devices' interrupt data; add a function
to collect the data.
Also add a timer used to delay UOS pass-thru devices'
interrupt injection if an "interrupt storm" detected
by SOS.
Tracked-On: #866
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Reviewed-by: Li Fei1 <fei1.li@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Replace pointer with static memory for msr_bitmap
inside structure vm_arch.
Tracked-On: #861
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Anthony Xu <anthony.xu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
for each pass-thru device and its entry owned by one VM, so
change the pass-thru device's softirq lock & entry list into
per VM, so one VM's PT device interrupt process will not
interfere with other VMs; especially in case one user OS
"interrupt storm" happens, it will have little effect on
service OS.
Tracked-On: #866
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
MISRA-C requires that the controlling expression of an if statement or
an iteration-statement shall be Boolean type.
Tracked-On: #861
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
-- rename struct vioapic --> struct acrn_vioapic
-- update 'vioapic' field in 'struct arch_vm' from pointer
to instance
-- change vm_ioapic(vm) to inline, and move it to vm.h
-- change vioapic_init to void type
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Anthony Xu <anthony.xu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
-- update 'vuart' field in 'struct vm' from pointer
to instance
-- replace MACRO with inline function for vm_vuart,
and move it to vm.h
-- change vuart_init to void type
-- rename struct vuart -->struct acrn_vuart
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Anthony Xu <anthony.xu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
-- update 'vpic' field in 'struct vm' from pointer
to instance, and move it from 'struct vm' to 'struct arch_vm'
-- replace MACRO with inline function for vm_pic, and move it
to vm.h
-- changed vpic_init to void type
-- removed vpic_cleanup
-- move struct acrn_vpic/i8259_reg_state from vpic.c to vpic.h
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Anthony Xu <anthony.xu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
In current code, the address translation type for passthrough devices
in SOS is passthrough type, which means the device in SOS can access
the whole physcial memory.
This patch uses SOS EPT to translate address for passthrough
devices. So that the memory of VMM or trusty can be protected from
SOS PTDev.
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Reviewed-by: Li, Fei1 <fei1.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This patch adds code to support read-only RTC support for guests
run by partition mode ACRN. It supports RW for CMOS address port 0x70
and RO for CMOS data port 0x71. Reads to CMOS RAM offsets are fetched
by reading CMOS h/w directly and writes to CMOS offsets are discarded.
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
- clear run context when reset vcpu;
- destroy trusty without erase trusty memory when reset vm;
changelog:
v1 -> v2: fix misra violation on calling memset();
Signed-off-by: Sun Victor <victor.sun@intel.com>
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Reviewed-by: Chi Mingqiang <mingqiang.chi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
ACRN in partition mode emulates UART for the VMs directly launced
from HV. This patch adds an option to enable/disable vUART for a
VM.
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
For Partition mode ACRN, kernel load address and Boot args load address
are hardcoded. Boot args are currently passed from vm description for
each VM. Renamed init_vm0_boot_info to init_vm_boot_info.
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
ACRN boots multiple OS in partitioning mode. This patch adds code to assign
vm_id in the vm data structure to be same as the one assigned at compile time.
This makes the vm id deterministic for each VM booted from HV directly.
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
This patch is an extension to the commit 6643adff8b.
It uses the mptable API to build mptable for each VM booted by ACRN in partition mode.
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Adding code to map memory for UOS in partitioning mode ACRN.
HPA starting above 4GB is used for UOS memory. Supports only contiguous memory
from host for UOS. Current implementation supports only 2 GB for UOS memory.
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
-- add clear trusty memory flag
In some cases such as UOS power off or UOS full reset,
need to clear trusty memory,no need to clear memory such as
UOS S3 or UOS system reset,then add a flag to distinguish it
when destroy secure world.
-- Restore trusty memory to guest normal world.
-- Moved free trusty EPT inside destroy_secure_world
In some cases such as UOS S3 or UOS system reset,
only need to free trusty EPT, this patch move free
trusty EPT inside destroy_secure_world.
Because PD/PT are shared in both secure world's EPT
and normal world's EPT,before freeing trusty EPT,
it will memset all PDPTEs except trusty memory,
then call 'free_ept_mem', it can only free trusty EPT,
and does't affect shared normal world EPT.
v2-->v3:
-- Used new mmu api ept_mr_add when restore trusty memory
to SOS and normal world
-- Dropped this patch "Removed reverted page tables for trusty memory"
because map_mem will be removed in future
It will have a patch, need to update this api(ept_mr_add),
it will not create inverted page tables for trusty memory.
v1-->v2:
-- free trusty ept
still use free_ept_mem, not add a new api,but need to
memset pdptes except trusty memory
-- Removed reverted page tables for trusty memory.
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
V4:
- Clear address cache info after a full cf8/cfc access
- Add NULL pointer checking when calling init/deinit ops
V3:
- Do not use ASSERT
- Loop through the vdev list defined in vm_desctiption table to call the vdev init/unit functions
- Make the cached vbdf info struct per vm instead of per pcpu
V2:
- Fixed MISRA violations
Reviewed-by: Anthony Xu <anthony.xu@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Define Bitmap flag to indicate secure world's state:
supported: 0(not supported), 1(supported)
active: 0(inactive), 1(active)
Refine secure_world_memory:
base_gpa_in_sos: base_gpa from SOS's view
base_gpa_in_uos: base_gpa from UOS's view, this is the original base_gpa
allocated by bootloader.
Recording above GPA is for usage of trusty EPT destroy and re-create.
There is an assumption: the secure world's memory address is contiguous
in both SOS and physical side.
Signed-off-by: Qi Yadong <yadong.qi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
ACRN in partitioning mode boots multiple OS. Adding code to parse
VM description structure and a reference description structure for
booting 2 OSes.
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Added prepare_vm function as a wrapper function on top of prepare_vm0.
This makes adding support for partition mode ACRN to boot multiple
VMs from HV cleaner.
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Remove structure vm_attr
Wrap two APIs alloc_vm_id and free_vm_id
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
And export the API to DM. DM will do system reboot/S3 resume based
on this API.
Also add the pre-assumption description for some vm APIs.
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
For data structure types "enum vpic_wire_mode, struct stack_canary",
its name is identical with variable name in the same scope.
This MISRA C violation is detected by static analysis tool.
For variables "segment_override, pde_index", its name is identical
with function name. This MISRA C violation is detected.
Naming convention rule:Variable name can be shortened from
its data structure type name.
The following udpates are made:
enum vpic_wire_mode vpic_wire_mode-->enum vpic_wire_mode wire_mode
struct stack_canary stack_canary-->struct stack_canary stk_canary
uint8_t segment_override:1 --> uint8_t seg_override:1
uint32_t pde_index--> uint32_t pde_idx
V1-->V2:
Remove update "enum cpu_state cpu_state-->enum cpu_state state"
and "enum irqstate irqstate-->enum irq_ops_mode ops_mode", other
patch will cover it.
V2-->V3:
Update "uint32_t pde_index--> uint32_t pde_idx".
Signed-off-by: Xiangyang Wu <xiangyang.wu@linux.intel.com>
For data structure types "struct pic and struct iommu_domain",
its name is identical with variable name in the same scope.
This MISRA C violation is detected.
Naming convention rule:If the data structure type is used by only one
module and its name meaning is simplistic, its name needs prefix
shorten module name.
Naming convention rule:Variable name can be shortened from its
data structure type name.
The following udpates are made:
struct pic pic-->struct i8259_reg_state i8259
struct iommu_domain iommu_domain-->struct iommu_domain iommu
V1-->V2:
Update "struct iommu_domain iommu_domain-->struct iommu_domain iommu"
Signed-off-by: Xiangyang Wu <xiangyang.wu@linux.intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
V1:
In order to remove MISRA C violations for rule
219S, rename functions, macros whose name
starts with "_".
Also removed some __mmio functions because they are
duplicates and are not used anywhere.
Renamed functions like __assert, to asm_assert,
because they were only wrappers around asm calls.
V2:
Over and above the changes on V1, modified bitmap
functions names to lock (corresponding to unlock)
introduced in V1
Signed-off-by: Arindam Roy <arindam.roy@intel.com>
hypervisor will crash if user try to call hypercall
HC_CREATE_VM in infinite style.
actually, the number of VMs hypervisor can support
depends on the bit width of 'vmid_bitmap'.should
return error in case of overflow.
other cleanup for this function to avoid memory leak
in case of failure.
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
if defined CONFIG_VM0_DESC, HV will use predefined vm0_desc to config
VM0, otherwise, HV will run VM0 with all physical cpus.
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Clean up most reported integral-type-related violations still existing under
arch/x86/guest/. The remaining reports that are not trivial to suppress will be
explained in separate documents.
Also move acpi_info outside acrn_common.h as the structure is no longer shared
with DM.
v1 -> v2:
* Move struct acpi_info to bsp_extern.h
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The main focus on: constant suffix U/UL; parameters cast like
uint32 to a uint16 variable; unify some APIs interface,
consist with the callers.
also modify some places to unify code style
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
vmid's type prefered to be uint16_t.
V1->V2:vmid from uint32_t transfer to uint16_t
V2->V3:add range check to hcall's vmid parameter
V3->V4:seperate the declaration and actual code.
V4->V5:remove range check from hcall's vmid parameter
Signed-off-by: Huihuang Shi <huihuang.shi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
rename vm_hw_logical_core_ids to vm_pcpu_ids
and changed the type to uint16_t.
V1->V2:rename the vm_hw_logical_core_ids
Signed-off-by: Huihuang Shi <huihuang.shi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
MISRA-C requires the use of brackets, even when there is only one
statement in the loop body.
Signed-off-by: Ying Liu <ying2.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
There are some integer type conversions reported by static
analysis tool for vcpu id, number of created vcpus, and
vpid, to reduce these type conversions, redesign vcpu id,
number of created vcpus, and vpid type as uint16_t as per
their usage, related 16-bit atomic operations shall be
added in HV.
MISRA C requires that all unsigned constants should have the suffix 'U'
(e.g. 0xffU), but the assembler may not accept such C-style constants.
Add 16-bit atomic add/dec/store operations;
Update temporary variables type and parameters type of
related caller;
Update vpid type as uint16_t;
Replace Macro with constant value for CPU_PAGE_SIZE.
Note: According to SDM A.10, there are some bits defined
in the IA32_VMX_EPT_VPID_CAP MSR to support the INVVPID
instruction, these bits don't mean actual VPID, so
the vpid field in the data struct vmx_capability doesn't
be updated.
V1--V2:
update comments for assembly code as per coding style;
Signed-off-by: Xiangyang Wu <xiangyang.wu@intel.com>
transfer num_vcpus,exp_num_vcpus to uint16_t.
transfer vm_hw_num_cores to uint16_t.
Signed-off-by: Huihuang Shi <huihuang.shi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
To follow the Misra C standard, doing one assignment per line to
make code is clearly readable and reduces the confusion of its
intetion or typo.
Signed-off-by: Yang, Yu-chu <yu-chu.yang@intel.com>
It will print error information inside memcpy_s if
the parameteter is invalid, the caller can not check
the return value for memcpy_s/strcpy_s/strncpy_s
code like this:
int a(void) {
return 0;
}
int b(void){
a();
}
fix as follow:
int a(void) {
return 0;
}
int b(void){
(void)a();
}
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Misra C required signed/unsigned conversion with cast.
V1->V2:
a.split patch to patch series
V2->V3:
a.change the uint64_t type numeric constant's suffix from U to UL
Signed-off-by: Huihuang Shi <huihuang.shi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
We define attr.name in struct vm and named as ("vm_%d", attr.id). attr.name only
be used in debug tool vm_list. It does't deserve to do so in OS created flow
(aka function create_vm). It's better to handle this in vm_list tool.
Signed-off-by: Kaige Fu <kaige.fu@intel.com>
Acked-by: Eddie Dong <eddie.dong@inte.com>
ACRN needs to trap the pm1a/pm1b written/read from VM0. So we
could know when should we put the system to S3.
We will have two path back to VM0:
- S3 enter/exit sucess. Will reset VM0 and jump to VM0 wakeup vec
with real mode
- S3 enter/exit failed. Will return to the next instruction of
pm1a/pm1b register writing. VM0 will read the pm1a/pm1b evt
register to check whether it's waked up or not.
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Emulate VM0 resume from S3 state:
- reset BSP of VM0
- set the BSP entry to saved VM0 wakeup vec and set BSP to real mode
- start BSP
To match trampoline_spinlock release on ACRN Sx resume path, acquire
trampoline_spinlock if ACRN Sx enter fails.
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Couple of small changes merged in this change:
- export main_entry, trampoline_spinlock and stop_cpus.
- change vm_resume() name to resume_vm()
- change resume_console_enable() name to resume_console()
- extend reset_vcpu to reset more fields of vcpu
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
phys_cpu_num is more popular than phy_cpu_num, update them
through command.
Signed-off-by: Xiangyang Wu <xiangyang.wu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
MISRA C explicit required expression should be boolean when
in branch statements (if,while...).
Signed-off-by: Huihuang Shi <huihuang.shi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
MISRA C required that return value should be used, missing for it should
add "(void)" prefix before the function call.
Some function can be declared without return value to avoid this problem.
Signed-off-by: Huihuang Shi <huihuang.shi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The pm S state data is from host ACPI info and needed for S3/S5
implementation.
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The following massages is not fatal error but should be print to serial and
sbuf at the same time. pr_fatal is not a good choice. pr_acrnlog is designed
to deal with the situation. So replace the following misused pr_fatal with
pr_acrnlog.
Signed-off-by: Kaige Fu <kaige.fu@intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
vm_state_info in struct vm_arch is not used, remove it
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Xu, Anthony <anthony.xu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
When we create an UOS, we didn't indicate the vmid.
Thus we can't get the vm description for the vm
description array.
Instead we use a temporary vm description to save data to
fill the vm structure when crate an UOS. It's uselesss once
UOS has created. So we don't need to maintain vm description
array here for UOS.
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
According to the comments in hypervisor:
" This file includes config header file "bsp_cfg.h" and other
hypervisor used header files.
It should be included in all the source files."
this patch includes all common header files in hypervisor.h
then removes other redundant inclusions
Signed-off-by: Zide Chen <zide.chen@intel.com>
allocated all pcpus to vm0 to handle possible AP wakeup flow for all cpus,
as we pass org ACPI table to VM0 - that means VM0 can see all CPUs.
SOS(VM0) start expected CPUs through "maxcpus=" kernel cmdline option.
During first hypercall from SOS, calling vm_fixup to free un-expect-enabled
vcpus from VM0.
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Xu, Anthony <anthony.xu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
- rename it to 'io_shared_page' to keep consistent
with ACRN HDL foils.
- update related code that reference this data structure.
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Split pm.c from cpu_state_tbl.c to put guest power management related
functions, keep cpu_state_tbl.c to store host cpu state table and
related functions.
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Kevin Tian <kevin.tian@intel.com>
This address maybe invalid if a hostile address was set
in hypercall 'HC_SET_IOREQ_BUFFER'.it should be validated
before using.
Update:
-- save HVA to guest OS's request buffer in hyperviosr
-- change type of 'req_buf' from 'uint64_t' to 'void *'
-- remove HPA to HVA translation code when using this addr.
-- use error number instead of -1 when return error cases.
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
The vm px info would be used for guest Pstate control.
Currently it is copied from host boot cpu.
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Kevin Tian <kevin.tian@intel.com>
This patch added API destroy_secure_world, which will do:
-- clear trusty memory space
-- restore memory to SOS ept mapping
It will be called when VM is destroyed, furthermore, ept of
Secure world will be destroyed as well.
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Reviewed-by: Anthony Xu <anthony.xu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
this patch is a preparation for changing ptdev remapping entry from
virtual to physical based, it changes the ptdev_lock from per-vm to
global, as entries based on physical mode are global resource.
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Generate all common virtual cpuid entries for flexible support of
guest VCPUID emulation, by decoupling from PCPUID.
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Acked-by: Xu, Anthony <anthony.xu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Acked-by: Chen, Jason CJ <jason.cj.chen@intel.com>
1. refine multiboot related code, move to /boot.
2. firmware files and ramdisk can be stitched in iasImage;
and they will be loaded as multiboot modules.
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
add key info structure
add sworld_eptp in vm structure, and rename ept->nworld_eptp
add secure world control structure
Change-Id:
Tracked-On:220921
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
