According to SDM 4.6 Access Rights definition, if SMAP/SMEP
is enabled, more conditions are used to decide the access rights
like SMAP/SMEP, EFLAGS.AC, R/W bit in every paging-structure entry
for page walking.
This patch add the check to guest page walking function and inject
page fault accordingly.
Tracked-On: #1207
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
The current movs emulation has issues:
1. it use gva to get/put data.
2. it only support src and dst operand are memory which does not
apply to our case (one of them should be mmio and triggers
EPT voilation).
This patch fix the issue by:
1. convert the address from gva to hva before access it.
2. handle mmio emulation.
Also fix the issue introduced by previous instruction reshuffle
patchset:
1. the desc validation should be only applied to none-64bit mode.
2. gva2gpa should be given correct guest virtual address.
Specailly for movs, we cache the dst gpa if the check during
movs decoding success. And use it directly during movs
emulation.
Tracked-On: #1207
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Tested-by: Qi Yadong <yadog.qi@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
- replace the usage of mdelay with udelay
- remove lib/mdelay.c
- rename udelay.c to misc.c
future other small APIs could put in misc.c
Tracked-On: #861
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
-- update 'vlapic' in 'struct vcpu_arch' from pointer
to instance
-- add inline function(vcpu_vlapic) in vcpu.h
Tracked-On: #861
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
move structure vlapic_pir_desc/vlapic_timer/
acrn_vlapic from vlapic_priv.h to vlapic.h
Tracked-On: #861
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Replace pointer with static memory for apicv_apic_access_addr
Tracked-On: #861
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Replace pointer with static memory for msr_bitmap
inside structure vm_arch.
Tracked-On: #861
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Anthony Xu <anthony.xu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Replace vmcs pointer with static memory for vmcs region
inside structure vcpu_arch.
Tracked-On: #861
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Anthony Xu <anthony.xu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
In function start_cpus, we allocated memory under 1M when
preparing AP trampoline code.
With S3 feature enabled, start_cpus is called every time after
ACRN resume from S3 which leaks the allocated memory for AP
trampoline code.
To avoid memory leak, move the AP trampoline preparing function
out of start_cpus to make sure the memory for AP trampoline is
only allocated one time when system boot.
Tracked-On: #1156
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Reviewed-by: Zide Chen <zide.chen@intel.com>
- convert function like macros to inline functions based on MISRA-C
requirement
- remove some unused and duplicated macros
Tracked-On: #861
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
as SOS mapped all memory at the beginning, so trap vlapic need unmap its
memory; for UOS, there is no need as UOS never mapped it.
Tracked-On: #1124
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
error message for "read" or "write" was incorrect.
for developers, we just need print out direction & type value.
Tracked-On: #875
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
for each pass-thru device and its entry owned by one VM, so
change the pass-thru device's softirq lock & entry list into
per VM, so one VM's PT device interrupt process will not
interfere with other VMs; especially in case one user OS
"interrupt storm" happens, it will have little effect on
service OS.
Tracked-On: #866
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The arch_vcpu->irq_window_enabled is almost useless in original code.
This patch use it to avoid unnecessary "interrupt-window exiting"
conditions check if "interrupt-window exiting" is aleady enabled.
Tracked-On: #1190
Signed-off-by: Yu Wang <yu1.wang@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
The external interrupt events only can be inject if RFLAGS.IF = 1 and no
blocking by both STI and MOV SS. If met this scenario, we need to enable
"interrupt-window exiting" for injection in next VMEXIT.
Tracked-On: #1189
Signed-off-by: Yu Wang <yu1.wang@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
If the "virtual-interrupt delivery" is enabled for vmx apicv, then need
avoid to enable interrupt-window exiting. From SDM Vol3, 29.2.1, the
evaluation of pending virtual interrupts only be trigger if
"interrupt-window exiting" is 0.
The original code will enable interrupt-window vmexit if any pending
vlapic interrupts even the "virtual-interrupt delivery" is enabled. It
will cause the pending interrupts can't be evaluate immediately until
guest triggered interrupt-window vmexit.
For "virtual-interrupt delivery" enabled case, just need sync the
pending interrupts to irr and update rvi if needed. And CPU will
evaluate and automatic injecct virtual interrupt at appropriate time. It
doesn't rely on interrupt-window vmexit.
For "virtual-interrupt delivery" disabled case, need to check if satisfy
the virtual interrupt injection conditions before doing the interrupt
injection. If not, then need to enable interrupt-window vmexit and
re-check the conditions in the next time vmexit.
Tracked-On: #1187
Signed-off-by: Yu Wang <yu1.wang@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
-- Change vmx_off/exec_vmxon/exec_vmclear/exec_vmptrld/
exec_vmxon_instr/init_vmcs to void type
-- for vmxon/vmclear/vmptrld, add pre-conditions to
guarantee sucessful execution.
Tracked-On: #861
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Check if the VMX capability is locked with incorrect value,
at the time when HV do the hardware capability detect.
Tracked-On: #861
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Remove vmxon_region_pa from structure per_cpu_region,
and define vmxon_region inside per_cpu_region.
Tracked-On: #861
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Add the brackets for Macro parameter to avoid the unintentional
mistakes.
A simple example that may cause mistakes:
#define minus(x) -x
When the following call is made,
z = minus(a-b)
it becomes:
z = -a-b;
where "-a - b" is equivalent to "(-a) - b" rather than "- (a - b)", as
expected.
v2 -> v3:
* convert DMAR_WAIT_COMPLETION to inline function
* remove the macro PIC_PIN_FOREACH and implement the well-formed
for loop in each case
* replace __CPP_STRING with STRINGIFY and remove the unused CPP_STRING
v1 -> v2:
* Remove some changes to function like macro since MISRA-C requires to
use inline functions if it is possible.
These MACRO brackets violations will be fixed together when fixing
other issues related to function like macro.
Tracked-On: #861
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
If hardware_detect_support() failed,as it return to
bsp_boot_init with a different stack and thus returning
from bsp_boot_init becomes an undefined behavior.
Tracked-On: #861
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
MISRA-C requires that each function defined and declared shall be called
or referenced in code analyzed.
In some cases, we would like to keep the non-called functions for code
completeness, such as
vcpu_inject_extint/vcpu_inject_nmi/vcpu_inject_gp/vcpu_inject_pf
/vcpu_inject_ud/vcpu_inject_ac/vcpu_inject_ss.
This pacth removes some functions that are independent and are not
called in our code base.
Tracked-On: #861
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
MISRA-C requires that each parameter in the MACRO shall be in brackets.
In some cases, adding brackets for all of the parameters may not be a
perfect solution.
For example, it may affect the code readability when there are many
parameters used in the MACRO.
And duplicated brackets will appear when one MACRO called another MACRO
which is using same parameters.
This patch convert some MACROs to inline functions to avoid such cases.
v1 -> v2:
* Remove the unnecessary changes in hypervisor/bsp/uefi/efi/boot.h
Tracked-On: #861
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
MISRA-C requires that the controlling expression of an if statement or
an iteration-statement shall be Boolean type.
Tracked-On: #861
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
We have two same log message in decode_instruction. It's a little bit confusing.
So, this patch refine the log message to make it more explicit.
BTW, we refine one message in create_vcpu.
Tracked-On: #1136
Signed-off-by: Kaige Fu <kaige.fu@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
This patch fixes the following issues:
- No newline after semi colon.
- No space after semi colon in for expression.
- No space between if, while, for and expresn.
v1 -> v2:
* Fix the typo for the for loop change.
Tracked-On: #861
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
We don't need find_next_table to walk to the next EPT page table.
Tracked-On: #1124
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Add 1GB large page support limit on our platform.
Tracked-On: #1124
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
VMs in partition mode uses a kernel patch to switch to physical mode xAPIC.
The kernel patch together with this patch makes sure device MSIs use
physical mode as DM and physical APIC IDs in Destination field.
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
To be sure hypervisor and DM are position independent
and executable.
Tracked-On: #1122
Signed-off-by: wenshelx <wenshengx.wang@intel.com>
Acked-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
This patch fixes the following issues:
- Assignment operation in expression.
- For loop incrementation is not simple.
- No brackets to loop body.
- Use of comma operator.
v1 -> v2:
* Replace &x->y with &(x->y) based on our new coding rule
Tracked-On: #861
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
Since vmexit handling in ACRN partition mode is not complex (since no SOS and
all devices passthru), interrupts can stay disabled in root mode during
vmexit handling.
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
There is no requirement to hpa2gpa for trusty memory,
now we use the same inverted eptp for normal world and secure world,
that is it can get some trusty memory information by the inverted
page tables in normal world,then this patch removed the inverted
page tables for trusty memory.
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Change guest_msrs in vcpu data structure from pointer to array, which
could avoid the dynamic memory allocation.
v1 -> v2:
* Remove the unnecessary initialization for guest_msrs[] since vcpu is
allocated by calloc.
Tracked-On: #861
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
We should specify gpa for uos or sos when restore memory, otherwise
it would cause resume failure issue.
Signed-off-by: Victor Sun <victor.sun@intel.com>
Reviewed-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Li, Fei1 <fei1.li@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
-- rename struct vioapic --> struct acrn_vioapic
-- update 'vioapic' field in 'struct arch_vm' from pointer
to instance
-- change vm_ioapic(vm) to inline, and move it to vm.h
-- change vioapic_init to void type
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Anthony Xu <anthony.xu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
-- update 'vuart' field in 'struct vm' from pointer
to instance
-- replace MACRO with inline function for vm_vuart,
and move it to vm.h
-- change vuart_init to void type
-- rename struct vuart -->struct acrn_vuart
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Anthony Xu <anthony.xu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
-- update 'vpic' field in 'struct vm' from pointer
to instance, and move it from 'struct vm' to 'struct arch_vm'
-- replace MACRO with inline function for vm_pic, and move it
to vm.h
-- changed vpic_init to void type
-- removed vpic_cleanup
-- move struct acrn_vpic/i8259_reg_state from vpic.c to vpic.h
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Anthony Xu <anthony.xu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
In the gdt.h, it defines unions and parameters which is not used
in hypervisor. Removed them to keep the gdt definition simple.
Signed-off-by: Yang, Yu-chu <yu-chu.yang@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
- by default, ACRN will not support platform without
below APICv features:
-- Use TPR shadow
-- APIC-register virtualization
- remove mmio emualtion of local APIC for guest
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
In current code, the address translation type for passthrough devices
in SOS is passthrough type, which means the device in SOS can access
the whole physcial memory.
This patch uses SOS EPT to translate address for passthrough
devices. So that the memory of VMM or trusty can be protected from
SOS PTDev.
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Reviewed-by: Li, Fei1 <fei1.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
For the instructions other than MOVS, one operand is register
and another one is memory which trigger EPT voilation. In this
case, there is one possibility that EPT voilation happens before
guest fault:
the fault is triggered by related guest PTE access bit
voilation (like write to a gva with R/W bit cleared in PTE).
So we do this kind of check and inject exception to guest
accordingly during instruction decoding phase.
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Unlike the other instructions we emulated, MOVS has two operands
both are memory.
So we need to check whether the operand is valid GVA. With VMX
enabled, the src operand is always checked first by VMX. Which
means if src operand is not valid GVA, it will trigger fault
in guest before trigger EPT. So we don't need to check src
operand. Only need to check dst operand here.
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Drop the get_gla function and add
- get_gva_di_si_nocheck
get gva from ES:DI and DS(other segment):SI without
check faulure case
- get_gva_di_si_check
get gva from ES:DI and DS(other segment):SI with failure
case checked
TODO:
- Save dst_gpa and src_gpa for instruction emulation phase
use.
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
We will do check only during instruction decode phase.
vie_calculate_gla will be called both in instruction emulation
phase, we move the check out of vie_calculate_gla.
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
According to SDM vol3 25.1.1
With VMX enabled, following exception will be handled by guest
without trigger VM exit:
- faults based on privilege level
- general protection due to relevent segment being unusable
- general protection due to offset beyond limit of relevent segment
- alignment check exception
ACRN always assume VMX is enabled. So we don't need to these check
in instruction emulation. But we need to do page fault related check.
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
If rm show there is no SIB following rm field, we should get
base_register info from rm.
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
- call these functions directly, no need to register
callbacks.
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
The virt_vector/phys_vector are only used for debugging.
Rename msix to is_msix.
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Then we don't need to check whether phys_pin is valid in others.
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Then use the source id to lookup the ptdev remapping entry.
For msi interrupt ptdev: use bdf and vector_index to identify the id;
For intx interrupt ptdev: use pin and pin source to identify the id.
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
The npk_log is a log destination for the hypervisor, similar to the
console_log and the mem_log. It can be enabled/disabled/configured
by the SOS kernel via the hypercall HC_SETUP_HV_NPK_LOG.
The configuration includes:
1. Set the MMIO base address of the reserved NPK master.
2. Set the log level of the hypervisor NPK log.
After that, the npk_log can be enabled to write the hypervisor logs to
the MMIO address of the reserved NPK master with a simple header.
Signed-off-by: Zhi Jin <zhi.jin@intel.com>
Signed-off-by: Liu, Xiaojing <xiaojing.liu@intel.com>
Reviewed-by: CHEN Gang <gang.c.chen@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
The hypercall HC_SETUP_HV_NPK_LOG is added to enable/disable/configure
the hypervisor NPK log.
Signed-off-by: Zhi Jin <zhi.jin@intel.com>
Signed-off-by: Zhonghua Sun <zhonghua.sun@intel.com>
Reviewed-by: CHEN Gang <gang.c.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Since this interrupt pin is passed through to the guest, we could set
it as we like. There's no need a flag to emulate the masked status.
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
The apicv is one hardware acceleration feature of vlapic. All vlapic
APIs should keep vlapic_ as the prefix.
Signed-off-by: Yu Wang <yu1.wang@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
From SDM Vol3 10.4.6:
Some processors permit software to modify the APIC ID. However, the
ability of software to modify the APIC ID is processor model specific.
Because of this, operating system software should avoid writing to the
local APIC ID register.
So to permit change APIC ID is not one *must* feature. Keep it simple,
we are also reject to modify it.
This patch does code cleaning up for LAPIC ID related emulation.
Signed-off-by: Yu Wang <yu1.wang@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Since these APIs always return 0,
change them to void type,
vcpu_set_cr0()
vmx_write_cr0()
vcpu_set_cr4()
vmx_write_cr4()
kick_notification()
tsc_deadline_handler()
dmar_fault_handler()
ptdev_interrupt_handler()
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
We didn't emualte them well, so just disable them.
Here are PMU CPUID.0A, Intel RDT CPUID.0F and CPUID.10, Intel SGX CPUID.12,
Intel Processor Trace CPUID.14
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
- Clean up some code regarding to % and / operations since bit
operations are faster.
x % 64U ---> x & 0x3fU
x % 32U ---> x & 0x1fU
x % 16U ---> x & 0xfU
x % 8U ---> x & 0x7U
x % 4U ---> x & 0x3U
x % 2U ---> x & 0x1U
x / 64U ---> x >> 6U
x / 32U ---> x >> 5U
x / 16U ---> x >> 4U
x / 8U ---> x >> 3U
x / 4U ---> x >> 2U
x / 2U ---> x >> 1U
- Minor changes regarding to coding styles
Tracked-On: #861
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This commit replaces the "used" field of irq_desc with a bitmap to maintain
the irq use status to save memory and LOC, and improve the efficiency as well.
Signed-off-by: Yan, Like <like.yan@intel.com>
Reviewed-by: Li, Fei1 <fei1.li@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
- update 'apic_page' field in 'struct acrn_vlapic',
from pointer type to 'struct lapic_regs' type.
- delete 'pir' and update 'pir_desc' to 'vlapic_pir_desc'
type.
- fix potential memory leak in 'vlapic_create()'
should free allocated memory in case of registering
mmio handler failure.
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
MISRAC requires that the array size should be declared explicitly.
This patch fixes the issues caused by vm0_boot_context.
Fix pattern is like below:
extern char start_of_ROM, end_of_ROM, start_of_FLASH;
memcpy (& start_of_FLASH, & start_of_ROM, & end_of_ROM - &
start_of_ROM);
Tracked-On: #861
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Fix the parameter type mismatch between API declaration and definition.
Tracked-On: #861
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
-- change send_start_ipi/do_copy_earlylog to void type
-- drop the return value for vcpu_queue_execption
when inject GP/PF/UD/AC/SS
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
-- change two timer callbacks to void type
-- ignore the return value for add_timer
-- add (void) before several functions(memset/memcpy/
vcpu_get_xxx)
v1-->v2:
ignore the return value for add_timer
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
for secure and normal world has different EPTP, in secure world,
it could trap to hypervisor and call gpa2hpa function. So it need
check if it is in normal or secure world for EPTP selection.
Detailed explanation from Yadong Qi <yadong.qi@intel.com>:
Currently, trusty OS does not handle interrupt, so when an interrupt
is delivering in trusty, trusty will set it to LAPIC IRR register by
inject self_ipi() and then call world_switch to switch to Android,
So android will receive/handle the interrupt properly.Since the
vLAPIC is enabled in ACRN, so when trusty try to inject self_ipi(),
APIC-ACCESS vmexit will happen. Then ACRN will do instruction
decode/emulation, so the GPA2HPA will fail since page walk is using
nworld_eptp. It is probability an issue.
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This commit changes the order of functions in arch/x86/irq.c, and internal
function names to make it looks cleaner, with no change within any function.
Signed-off-by: Yan, Like <like.yan@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
There are several similar irq handlers with confusing function names and it's
not friendly to call update_irq_handler() to update a proper handler after
request_irq().
With this commit, a single generic irq handler is being used, in which, no lock
need to be acquired because our design could guarantee there is no concurrent
irq handling and irq handler request/free.
A flags field is added to irq_desc struct to select the proper processing flow
for an irq. Irqflags is defined as follows:
IRQF_NONE (0U)
IRQF_LEVEL (1U << 1U) /* 1: level trigger; 0: edge trigger */
IRQF_PT (1U << 2U) /* 1: for passthrough dev */
Because we have only one irq handler, update_irq_handler() should be replace by
set_irq_trigger_mode(), whichs set trigger mode flag of a certian irq.
Accordingly, the code where called update_irq_handler() need to be updated.
Signed-off-by: Yan, Like <like.yan@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
This commit refactors vector allocation/free codes, two functions are
defined to help alloc/free vectors for an irq:
- uint32_t alloc_irq_vector(uint32_t irq)
- alloc a free vector (0x20 ~ 0xDF), and bind it to irq, for legacy irqs
and static mapped irqs, vector has been allocated and bind, so just
check the mapping correctness;
- return: valid vector on success, VECTOR_INVALID on failure.
- void free_irq_vector(uint32_t irq)
- free vector allocated via alloc_irq_vector(), for legacy irqs and static
mapped irqs, nothing need to do.
Signed-off-by: Yan, Like <like.yan@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
This commit refactors the alloc/free irq num, two functions are defined:
- uint32_t alloc_irq_num(uint32_t irq)
- if irq is valid, mark the irq_desc as used; if it's IRQ_INVALID,
alloc a free irq, or else do nothing;
- return: irq num on success, or IRQ_INVALID on failure.
- void free_irq_num(uint32_t irq)
- free the irq num allocated via alloc_irq_num();
And a global spinlock to protect it from concurrent allocation/free.
Signed-off-by: Yan, Like <like.yan@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
This commit cleans up fiels of struct irq_desc:
- remove name, irq_desc_state, irq_cnt and irq_lost_cnt which are not used.
- remove irq_ prefix of irq_lock field of struct irq_desc;
- change enum irq_state to enum irq_use_state;
Signed-off-by: Yan, Like <like.yan@intel.com>
Reviewed-by: Li, Fei <fei1.li@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
removed some unnecessary variables and functions.
v1-->v2:
Replace div-by-zero with an inline ASM code
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
1)Fix to take into account the size of proc entries in MPtable.
2)Change APIC ids to virtual APIC IDs
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
V1:
In order to better comply with MISRA C,
add const qualifiers whereeven required.
In the patch, these are being added to pointers
which are normally used in "get" functions.
V2: Corrected the issues in the patch
pointed by Junjie in his review comments.
Moved the const qualifiers to the correct
places. Removed some changes which are not
needed.
V3: Updated patch comment.
This modifies a subset of all the functions
which might need constant qualifiers
for the their parameters.
This is not and exhaustive patch. This only
targets obvious places where we can use
the const qualifier. More changes will be
submitted in future patches, if required.
Signed-off-by: Arindam Roy <arindam.roy@intel.com>
vlapic_vmx_vapic_set_tmr is nobody use now, remove it first to avoid
build warning.
Signed-off-by: Yu Wang <yu1.wang@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
ACRN currently do not support SMM and SMI. Print one explicit warning
for it.
Signed-off-by: Yu Wang <yu1.wang@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
From SDM Vol3 Table 10-1 Local APIC Register Address Map. The 0x3F0 is
reserved.
Signed-off-by: Yu Wang <yu1.wang@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Currently, ACRN hasn't expose x2apic capability through cpuid.
And x2apic related code in vlapic.c has no real functionality. This
patch clear related code.
Signed-off-by: Yu Wang <yu1.wang@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
In interrupt-window exiting handler, disable it directly even there has
pending interrupts. The later acrn_handle_pending_request will
re-evaluation and re-enable it if needed.
Signed-off-by: Yu Wang <yu1.wang@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
This patch adds code to support read-only RTC support for guests
run by partition mode ACRN. It supports RW for CMOS address port 0x70
and RO for CMOS data port 0x71. Reads to CMOS RAM offsets are fetched
by reading CMOS h/w directly and writes to CMOS offsets are discarded.
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
-- Change these APIs to void type, add pre-conditions,
and move parameter-check to upper-layer functions.
handle_vpic_irqline
vpic_set_irqstate
vpic_assert_irq
vpic_deassert_irq
vpic_pulse_irq
vpic_get_irq_trigger
handle_vioapic_irqline
vioapic_assert_irq
vioapic_deassert_irq
vioapic_pulse_irq
-- Remove dead code
vpic_set_irq_trigger
v1-->v2:
add cleanup vpic
change some APIs to void type, add pre-conditions,
and move the parameter-check to upper-layer functions.
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
