The bit mask for an out instruction is only applied to hv inout
handlers.
Apply the bit mask to dm inout handlers as well.
Tracked-On: #2075
Signed-off-by: Peter Fang <peter.fang@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
By switching AP wakeup from broadcast to one by one, we could
set correct stack for each AP and drop the temp stack used during
AP boot.
Tracked-On: #2034
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
there is no need to clear CR4.TSD as there is no user mode
in ACRN hypervisor.
Tracked-On: #1842
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
now UP2 board use ttyS1 as debug uart in HV, and vuart ttyS0 in
SOS kernel (acrn.conf default configure), its default IRQ is 4,
but SOS kernel will also assign IRQ4 to its ttyS1, they're sharing
one IRQ, and it can cause SOS boot hung issue, for HV not support
sharing IRQ now.
some boards use ttyS0 as debug uart, it has not this issue; for that
board, SOS will assign IRQ5 to its ttyS1, no sharing IRQ.
change it to IRQ6 to avoid the issue.
Tracked-On: #2030
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
106D No prototype for non-static function.
2 functions missing prototyle declarations in header file.
120S Use of bit operator on signed type.
123S Use of underlying enum representation value.
enum values are treated like unsigned integer in vmsr.c
Tracked-On: #861
Signed-off-by: Zide Chen <zide.chen@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
With SMAP enabled, hypervisor can't access pages that
owned by guest(either SOS or UOS), and an override is
is provided: stac()/clac() to enable/disable access to
guest's memory pages.
Pre-conditon:
Mark hypervisor owned pages as supervisor mode (U/S = 0),
and set all othter memory pages as user mode (U/S = 1).
Tracked-On: #2056
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
MTRR emulation belongs to virtual CPU component.
- rename mtrr.c to vmtrr.c and move it to arch/x86/guest
- rename mtrr.h to vmtrr.h and move it to include/arch/x86/guest
Tracked-On: #1842
Signed-off-by: Zide Chen <zide.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Intercept IA32_TSC_ADJUST MSR so that writing IA32_TSC_ADJUST from the
guests won't impact the TSC in root mode or potentially other vCPUs in
the same pCPU.
- MSR TSC_ADJUST needs to be isolated between normal and secure world,
so it's included in NUM_WORLD_MSRS.
- Upon writing to either IA32_TSC_ADJUST or IA32_TSC from the guests,
don't write to physical MSRS so it won't impact the host side, but
update the TSC offset VM-execution control.
- don't need to intercept rdmsr for IA32_TIME_STAMP_COUNTER.
- add the missing statement in save_world_ctx() to save the tsc_offset
during world switch.
Tracked-On: #1867
Signed-off-by: Zide Chen <zide.chen@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
hypervisor initilization component triggered by boot component,
and it calls different components initilization functions from
the highest layer.
this patch added init.c and move reorged cpu init functions into
it, keep hardware management functions in cpu.c but move other
components' init function into init.c.
the hypervisor initilization components will call:
- init_cpu_pre
- init_cpu_post
- init_bsp
- init_debug_pre
- init_debug_post
- init_guest
- init_passthru
- enter_guest_mode
the hypervisor initilization component include files:
arch/x86/init.c
include/arch/x86/init.h
this component is higest layer, so there is no reverse dependencies for it.
v2:
- separate into 2 patches, 1 for reorg, 1 for pure move.
Tracked-On: #1842
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Xu, Anthony <anthony.xu@intel.com>
reorg both init functions, separate the initilization of different
components.
v2:
- separate into 2 patches, 1 for reorg, 1 for pure move.
Tracked-On: #1842
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Xu, Anthony <anthony.xu@intel.com>
functions like set_vcpuid_entries & guest_cpuid should only
server for virtual cpuid, so move such kind of functions
to guest/vcpuid.c.
and all native cpuid APIs will keep in cpuid.h
Tracked-On: #1842
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Combination of BOARD and FIRMWARE is a more precious definition.
And we decide PLATFORM_XXX based on FIRMWARE, remove relative one in
board config.
We reserve PLATFORM for backward compatibility.
Tracked-On: #1995
Signed-off-by: Tw <wei.tan@intel.com>
Reviewed-by: Yin Fengwei < fengwei.yin@intel.com>
Reviewed-by: Binbin Wu <binbin.wu@intel.com>
- enable NX feature in hypervisor:
1. Set 'XD' bit for all pages, including pages for guests
when initialize MMU tables in hypervisor.
2. remove 'XD' bit for pages that contain hypervisor instructions.
3. enable MSR EFER.NXE,which will enable page access restriction by
preventing instruction fetches form pages with XD bit set.
- remove "-Wl -z noexecstack" GCC flag option in hypervisor
Makefile as it would not affect stack attribute in hyervisor,
which setup stack itself, instead of by loader.
Tracked-On: #1122
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
1. change its APIs as more indepentent, and modify the callers' code
2. limit its global variables as static, and return const to the callers
3. remove unused code in "CONFIG_CMA"
Tracked-On: #1842
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
1. e820 is modulized as separated files.
2. move boot_regs into multiboot.h as it's related with
multiboot info header
Tracked-On: #1842
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
based on previous patch, we can move idt.S and idt.h out of boot component
Tracked-On: #1842
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
we will not enable interrupt until interrupt_init, so we can defer idt
fixup and lidt to interrupt_init.
Tracked-On: #1842
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
we are not using ldt, so just init fs & gs with 0x10 which lead to
data segement descriptor in gdt.
Tracked-On: #1842
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Currently there are two fields in ext_context to emulate IA32_PAT MSR:
- ia32_pat: hold the value of the emulated IA32_PAT MSR
- vmx_ia32_pat: used for load/store IA32_PAT MSR during world switch
This patch moves ext_context->ia32_pat to the common placeholder for
emulated MSRs acrn_vcpu_arch->guest_msrs[].
Also it renames ext_context->vmx_ia32_pat to ext_context->ia32_pat to
retain same naming convention in struct ext_context.
Tracked-On: #1867
Signed-off-by: Zide Chen <zide.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
- implement unified APIs to access guest_msrs[] under struct acrn_vcpu.
- use these new APIs to read/write emulated TSC_DEADLINE MSR
- switch world_msrs[] and guest_msrs[] during world switch for MSRs that
need world isolation
- remove the old guest_msrs[] array and it's index macros.
Tracked-On: #1867
Signed-off-by: Zide Chen <zide.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Create two arrays for emulated MSRs:
- guest_msrs[] in struct acrn_vcpu_arch: emulation for all MSRs that are
included in emulated_guest_msrs[].
- world_msrs[] in struct cpu_context: it has separate copies for secure and
normal world for those MSRs that are in the first NUM_WORLD_MSRS entries
in emulated_guest_msrs[].
Split vmsr.c/emulated_msrs[] into 3 smaller arrays:
- emulated_guest_msrs[]: corresponding MSRs are emulated in guest_msrs[]
- mtrr_msrs[]: emulated MTRRs are saved in vMTRR module
- unsupported_msrs[]: GP for any guest accesses
Tracked-On: #1867
Signed-off-by: Zide Chen <zide.chen@intel.com>
Identifier reuse may arise confusion. So should minimize the case of it
as much as possible. This patch is try to do this except the PCI related
module.
Tracked-On: #861
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
MISRAC requires that the array size should be declared explicitly.
Tracked-On: #861
Signed-off-by: Zide Chen <zide.chen@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Implicit conversion may result in loss of information or undefined behaviour.
So make it with explicit conversion.
Tracked-On: #861
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
There may the theoretic infinite loop with some code. But actually it doesn't.
This patch make these code more obvious it's not a potentially infinite loop.
Tracked-On: #861
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
On platforms, that do not support APICv register virtualization, all the
x2APIC MSRs need to intercepted by ACRN for emulation.
Tracked-On: #1973
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
This patch does:
- remove the unused API declaration
- fix use of uninitialized variable in instr_emul.c
Tracked-On: #861
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Since "uint8_t page[CPU_PAGE_SIZE]" wants to ensure the first_page only
took PAGE_SIZE memory space and aligned to PAGE_SIZE. However, it couldn't.
So just make it simpler.
Tracked-On: #861
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Reviewed-by: Qi, Yadong <yadong.qi@intel.com>
This patch adds the necessary space before or after binary operator.
v1 -> v2:
* minor fix related to integer
[i - 1] ====> [i - 1U]
Tracked-On: #861
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
The function not used in extern c file, must add static.
Tracked-On: #861
Signed-off-by: Huihuang Shi <huihuang.shi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The result of evaluate expression,it's type should be boolean.
Tracked-On: #861
Signed-off-by: Huihuang Shi <huihuang.shi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Input parameter of mmio_write64/mmio_write32/mmio_write16/mmio_write8
should be 'void *addr' rather than 'const void *addr' since the object
pointed by 'addr' is modified in these operations.
This patch change the param type of mmio_write** and update its usage
accordingly.
Tracked-On: #861
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Reviewed-by: Li, Fei1 <fei1.li@intel.com>
replace CPU_PAGE_MASK with PAGE_MASK
These two MACROs are duplicated and PAGE_MASK is a more reasonable name.
Tracked-On: #861
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
- replace CPU_PAGE_SHIFT with PAGE_SHIFT
These two MACROs are duplicated and PAGE_SHIFT is a more
reasonable name.
- remove unused MACROs related to page shift in cpu.h
Tracked-On: #861
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
replace CPU_PAGE_SIZE with PAGE_SIZE
These two MACROs are duplicated and PAGE_SIZE is a more reasonable name.
Tracked-On: #861
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
replace serial PCI MMIO base address configure with its BDF configure.
Tracked-On: #1923
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
IEC 61508,ISO 26262 standards highly recommend single-exit rule.
Reduce the count of the "return entries".
Fix the violations which is comply with the cases list below:
1.Function has 2 return entries.
2.The first return entry is used to return the error code of
checking variable whether is valid.
Fix the violations in "if else" format.
Tracked-On: #861
Signed-off-by: Huihuang Shi <huihuang.shi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
IEC 61508,ISO 26262 standards highly recommend single-exit rule.
Reduce the count of the "return entries".
Fix the violations which is comply with the cases list below:
1.Function has 2 return entries.
2.The first return entry is used to return the error code of
checking variable whether is valid.
Fix the violations in "if else" format.
Tracked-On: #861
Signed-off-by: Huihuang Shi <huihuang.shi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
IEC 61508,ISO 26262 standards highly recommend single-exit rule.
Reduce the count of the "return entries".
Fix the violations which is comply with the cases list below:
1.Function has 2 return entries.
2.The first return entry is used to return the error code of
checking variable whether is valid.
Fix the violations in "if else" format.
Tracked-On: #861
Signed-off-by: Huihuang Shi <huihuang.shi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
IEC 61508,ISO 26262 standards highly recommend single-exit rule.
Reduce the count of the "return entries".
Fix the violations which is comply with the cases list below:
1.Function has 2 return entries.
2.The first return entry is used to return the error code of
checking variable whether is valid.
Fix the violations in "if else" format.
Tracked-On: #861
Signed-off-by: Huihuang Shi <huihuang.shi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Boot component prepares the very basic platform boot env. It finally call
into platform initilization entries:
- bsp_boot_init & cpu_secondary_init for start up
- or restore_s3_context for wakeup
this patch is the final one, it did some code clean up and move some definition
from vm0_boot.h to boot_context.h.
after this patch, the boot component include files:
arch/x86/boot/cpu_primary.S
arch/x86/boot/trampoline.S
arch/x86/boot/cpu_save_boot_ctx.S
arch/x86/boot/idt.S
boot/reloc.c
boot/include/reloc.h
include/arch/x86/boot/idt.h
include/arch/x86/boot/boot_context.h
Tracked-On: #1842
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Boot component prepares the very basic platform boot env. It finally call
into platform initilization entries:
- bsp_boot_init & cpu_secondary_init for start up
- or restore_s3_context for wakeup
this patch moves set_idt from header file to irq.c
Tracked-On: #1842
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Boot component prepares the very basic platform boot env. It finally call
into platform initilization entries:
- bsp_boot_init & cpu_secondary_init for start up
- or restore_s3_context for wakeup
this patch move functions for AP trampoline into trampoline.c from reloc.c
Tracked-On: #1842
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
The PLATFORM configuration option is not used in any unique way. With simple
changes, we can directly use CONFIG_PLATFORM_UEFI and CONFIG_PLATFORM_SBL to
compile the ACRN hypervisor. This patch removes this config option and adjusts
the hypervisor Makefile accordingly.
The "old" way of specifying the platform from the command-line is not affected
by these changes, e.g.: "make PLATFORM=sbl"
Tracked-On: #1588
Signed-off-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
* Add more Kconfig options documentation for the hypervisor
* Reword some existing one to improve readibility
* Break some help text to not go beyond 80 characters
Tracked-On: #1588
Signed-off-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
Co-Authored-By: David B. Kinder <david.b.kinder@intel.com>
This patch fixes the following violations:
1. Implicit conversion: actual to formal param
2. Value is not of appropriate type
3. No cast for widening complex int expression
4. Widening cast on complex integer expression
5. Narrower int conversion without cast.
Tracked-On: #861
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Now it's using the memory reserve by hypervisor. So there's not
necessaty to map or ummap this region from SOS.
Tracked-On: #1942
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
The previous would reserve memory for trusty in SOS kernel. Howerer,
there would no available 16 MB continue memory any more after a long time.
This result in allocating memory for trusty failed. This patch will reserve
memory for trusty in ACRN hypervisor in which case the memory allocation
for trusty will never fail.
Tracked-On: #1942
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
This patch places all unsupported MSRs in the intercepted_msrs[], but
don't implement any handlers in the switch clauses. Hence any
accesses from guests result in GP exceptions.
Tracked-On: #1867
Signed-off-by: Zide Chen <zide.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
- Put most of the emulated MSR number in emulated_msrs[], and remove
the individual calls to enable_msr_interception().
- vcpu_thread() injects General Purpose exception to the guest if any
VMEXIT handler doesn't return 0. This patch removes vcpu_inject_gp()
from all MSR VMEXIT handlers to keep the code clean.
- remove dead code.
Tracked-On: #1867
Signed-off-by: Zide Chen <zide.chen@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Regarding SGX, guests could access CPUID.07H.EBX[2] before query CPUID
leaf 12H.
Intel SDM 36.7.2: "If CPUID.(EAX=07H, ECX=0H):EBX.SGX = 1, the processor
also supports querying CPUID with EAX=12H on Intel SGX resource capability
and configuration."
Clear CPUID.07H.ECX[30] SGX_LC to make the guest view consistent.
Tracked-On: #1867
Signed-off-by: Zide Chen <zide.chen@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This patch allows to disable the serial port directly from Kconfig. This used
to only be possible from the command-line (by passing "uart=disabled"). To
disable the serial port via Kconfig, simply unselect the "Serial IO type"
option.
The default options do not seem to have any effect anymore (and were confusing
anyway) so they are removed and the serial port is enabled for various platforms
in their corresponding *.config file.
Tracked-On: #1481
Signed-off-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
`@return` is dedicated for brief description of return values, not for comments
stating actual return values. In addition, sphinx + breathe does not join
multiple adjacent `@return`. This results in multiple `Return` sections in the
generated document, which is confusing.
This patch replaces `@return` with `@retval` for the lists of return
values. Adjacent `@retval` can be joined into one list by breathe.
v1 -> v2:
* Replace return value descriptions like `negative` and `positive` with
expressions like `<0` and `>0` in `@retval`.
* Keep the list of `@retval` comprehensive, even when there is a `@return` to
generally describe what the return value means.
* Drop duplicated `@return` when it does not give more information than the
`@retval` list.
Tracked-On: #1595
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
It is preferred to state the absence of a return value explicitly in the
doxygen-stile comments. Currently there are different styles of doing this,
including:
@return None
@return NULL
@return void
@return N/A
This patch unifies the above with `@return None`.
Tracked-On: #1595
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
As SOS has already adapted to the new state transition of VHM requests for a
month, the old `valid` field can now be safely obsoleted.
This patch changes the `valid` field as reserved and drops all the code that
reads or modifies this field for backward compatibility. The embedded comments
are updated accordingly, following the doxygen style.
Tracked-On: #875
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
MISRA-C requires that if the return value of a function call is
assigned to a local variable, this value shall be used in all paths.
This patch moves the variable assignment right before the moment that
the variable is used.
Tracked-On: #861
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Boot component prepares the very basic platform boot env. It finally call
into platform initilization entries:
- bsp_boot_init & cpu_secondary_init for start up
- or restore_s3_context for wakeup
This patch just move files into reorg dir.
Tracked-On: #1842
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
IEC 61508,ISO 26262 standards highly recommend single-exit rule.
Reduce the count of the "return entries".
Fix the violations which is comply with the cases list below:
1.Function has 2 return entries.
2.The first return entry is used to return the error code of
checking variable whether is valid.
Fix the violations in "if else" format.
Tracked-On: #861
Signed-off-by: Huihuang Shi <huihuang.shi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
IEC 61508,ISO 26262 standards highly recommend single-exit rule.
Reduce the count of the "return entries".
Fix the violations which is comply with the cases list below:
1.Function has 2 return entries.
2.The first return entry is used to return the error code of
checking variable whether is valid.
Fix the violations in "if else" format.
Tracked-On: #861
Signed-off-by: Huihuang Shi <huihuang.shi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
v1-v2:
Bypass this case:
When binary arithmetic operators of different precedence (e.g. '+'
and '*') are mixed in an expression, parentheses are added to the
sub-expressions using the operator with a higher precedence.
v1:
The operator precedence rules are complicated and it is easy to make a mistake.
So add brackets to make operator expression more readable.
Tracked-On: #861
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
MISRA-C required every switch statement shall have a default label.
Tracked-On: #861
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
IEC 61508,ISO 26262 standards highly recommend single-exit rule.
Reduce the count of the "return entries".
Fix the violations which is comply with the cases list below:
1.Function has 2 return entries.
2.The first return entry is used to return the error code of
checking variable whether is valid.
Fix the violations in "if else" format.
Tracked-On: #861
Signed-off-by: Huihuang Shi <huihuang.shi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
replace HV_DEBUG with CONFIG_COM_IRQ which is more reasonable
Tracked-On: #861
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Reviewed-by: Li, Fei1 <fei1.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
now the size of sanitized_page is 32KB,
revise it to 4KB.
Tracked-On: #1842
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Currently guest IA32_TSC_AUX MSR is loaded manually right before VM
entry, and saved right after VM exit.
This patch enables VM-Entry Control and VM-Exit Control to switch
MSR IA32_TSC_AUX between host and guest automatically. This helps to
keep vcpu_thread() function and struct acrn_vcpu cleaner.
Also it removes the dead code of intercepting IA32_TSC_AUX.
Tracked-On: #1867
Signed-off-by: Zide Chen <zide.chen@intel.com>
Reviewed-by: Li, Fei1 <fei1.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
remove the usage of HV_DEBUG related to shell command in assign.c
Tracked-On: #861
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
remove the usage of HV_DEBUG in ioapic.c
Tracked-On: #861
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
In theory, there would have 256 pending interrupts on lapic ISR.
Add this check to avoid theoretic infinite loop for clearing
lapic isr. Leave the potentially hardware issue to machine check.
Tracked-On: #861
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Although the lapic base MSR have the same value in per-cpu except that the BSP bit.
However, we would enter s3 on the BSP cpu. After the resume from s3, the BSP bit was
clear on the BSP cpu. This patch fix this bug.
Tracked-On: #861
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Now if the vmexit reason is virtulized EOI for level triggered
interrupts, HV will loop all the ptdev entries, it is time-consuming,
this patch add vpin to ptdev entry mapping for vpic and vioapic
when add intx entry for a vm,it can use the ptdev entry directly
according to the mapping for vpin and ptdev entry when EOI vmexit.
v3-->v4:
-- add check vpin in remove_intx_remapping
-- move check vpin from ptdev_add_intx_remapping to add_intx_remapping
Tracked-On: #861
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Reviewed-by: Binbin Wu <binbin.wu@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
Move ptdev lock out from add_intx_remapping/add_msix_remapping
/remove_intx_remapping/remove_msix_remapping and make it protect
the whole add entry/remove entry process
v3-->v4:
--move ptdev lock out
v2-->v3:
-- still use ptdev lock for add/remove ptdev entry
Tracked-On: #861
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Reviewed-by: Binbin Wu <binbin.wu@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
-- Config MAX_PT_IRQ_ENTRIES 64 in Kconfig
-- Remove ptdev list
-- Add alloc_ptdev_entry_id api
v3-->v4:
-- move is_entry_active from assign.c to ptdev.h
-- Add clear active flag in release_entry
v2-->v3:
-- Remove redundancy active check for ptdev entry
in release_all_entries and get_ptdev_info
v1-->v2:
-- split to small patches
Tracked-On: #861
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Reviewed-by: Binbin Wu <binbin.wu@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
This patch introduce a new mode of IO request completion, polling mode.
Now, the sketch of ioreq process can be,
A. UOS vcpu0 generate PIO/MMIO ->
B. pcpu1(vcpu0 of UOS) trap into HV ->
C. pcpu1 build ioreq, send IPI and enter idle ->
D.1 pcpu0(vcpu0 of SOS) response IPI,
D.2 pcpu0 handle the ioreq in HV, kernel, DM,
D.3 pcpu0 mark ioreq as complete,
D.4 pcpu0 hypercall to enter HV ->
E.1 pcpu0 send IPI to wake pcpu1 up
E.2 UOS vcpu0 continue running
With this change, it skips D.4, E.1 steps. In step C, pcpu1 will enter a
polling ioreq state idle after send out the IPI.
It can save about ~5000 cpu cycles.
In polling mode, we do the polling in idle instead of pause cpu all the
time. It will consume more power. A better way is to use monitor/mwait
instructions which can put cpu into a sleep state with monitoring a
memory address. Unfortunately, APL has bug with monitor. We can gather
all ioreqs state into one monitorable memory and take advantage of
monitor/mwait for future platform.
The way polling or notification is per VM. We can config VMs in
different mode. By default, IO request completion will use notification
mode for all VMs. We can switch it by Kconfig.
Tracked-On: #1821
Signed-off-by: Shuo Liu <shuo.a.liu@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
This patch adds more comments to describe the structures and functions of vtd
that are public to the other components in the hypervisor. The comments are in
doxygen-style for document generation.
Tracked-On: #1595
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Reviewed-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
1. use error code defined in errno.h instead of 1.
2. panic if error occured while adding devices to VM0 domain.
3. panic if failed to reqeust irq for iommu.
The two panic added would only occurs before any VM starts running.
Tracked-On: #1855
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
In current code, DMA remapping is enabled at very early stage, when there is no
device added.
Devices are added to VT-d context table when creating VMs.
There is potential risk that there may be device DMA transactions when DMA remapping is
enabled, but the device is not added to the VT-d context table. (Eg. this could happen in UEFI
enviroment when USB keyboard use in efi intenal shell.)
This patch defers DMA remapping enabling until vm creation.
Tracked-On: #1855
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Current code doesn't init interrupt config when resume from S3.
The related register contect will be lost during S3.
This patch re-init these regiters.
Tracked-On: #1855
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Add an internal API to do action according to action function provided,
which can simplify the code.
Tracked-On: #1855
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
Move move public API to the bottom part of the file.
Tracked-On: #1855
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Becuase the number of character of a line is 120.
Merge lines for a statement if needed.
Tracked-On: #1855
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
dmar_uint -> dmar_unit
remove i in line 756 added by accident.
Tracked-On: #1855
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
remove the usage of HV_DEBUG in hypercall.c and vmcall.c
TO-DO:
Enhance Makefile to compile debug/release into 2 libraries
Tracked-On: #861
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
CSE FW uses an AEK (Attestation keybox Encryption Key) to encrypt the keybox
with AES-256-GCM algorithm before sending it to Android/Trusty. This key is
derived from the latest platform Seed by CSE FW with KDF (key derivation function)
HMAC-SHA256. After Trusty retrieves this encrypted keybox over HECI/MEI driver,
Trusty needs the same AEKkey to decrypt it. Hence, before Trusty launches,
Hypervisor derives the same AEK key from Platform Seed with the same algorithm
and the same derivation parameters, then sends this AEK along with Trusty vSeed
to Trusty world memory.
Since Platform Seed is only visible to Hypervisor and it must not be
sent to any guest VM, only Hypervisor can derive this AEK from this
Platform Seed, just like previous per-Trusty virtual Seed derivation.
Please note that Android Attestation Keybox is shared in a single hardware
platform, so all the Trusty instance/world can get the same AEK for
decryption even if there are multiple Android User OS/VMs running
on top of Hypervisor.
v1 --> v2:
Add detailed description why we need the patch to derive an extra key
v2 --> v3:
Convert API descriptions to Doxygen
Tracked-On: #1812
Reviewed-by: Bing Zhu <bing.zhu@intel.com>
Reviewed-by: Kai Wang <kai.z.wang@intel.com>
Signed-off-by: Chen Gang G <gang.g.chen@intel.com>
Acked-by: Bing Zhu <bing.zhu@intel.com>
An I/O handler is not linked to the I/O access size, so in searching for
the registered I/O handler, don't need to check the I/O request's access
size.
In struct vm_io_handler_desc, change fields addr and len to port_start and
port_end respectively to adapt to this change.
Tracked-On: #1815
Signed-off-by: Zide Chen <zide.chen@intel.com>
Reviewed-by: Li, Fei1 <fei1.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
1. CPU_SEG_WRITE->CPU_SEG_READ: it's actually seg read
2. 0x%hu -> 0x%x: it need print hex format
Tracked-On: #1833
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Adding Kconfig option to define the vuart port base address/IRQ.
By default, use 0x3F8/IRQ4. For MRB, use 0x3E8/IRQ6.
We are experiencing problems on NUC after changing from 0x3F8/IRQ4
to 0x3E8/IRQ6.
Tracked-On: #1817
Change-Id: Ie407e51a7bc25ac0bb4c61453c969f1466fa33ca
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Due to the side-effect to cache of "wbinvd" instruction, just apply it
in case of noncoherent DMA.
Tracked-On: #1824
Signed-off-by: Zheng, Gen <gen.zheng@intel.com>
Reviewed-by: Binbin Wu <binbin.wu@intel.com>
ioreqs acrossing VM reset is meaningless. So we reset their status when
VM reset.
Please note, device model and service os need to handle various ioreqs
pending status in emergency reset condition carefully. Otherwises, the
post processing of such ioreqs might overwrite this reset.
Tracked-On: projectacrn#1821
Signed-off-by: Shuo Liu <shuo.a.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Even in partition mode, we also need to clear vmid in vmid_bitmap to
indicate the VM is not present.
Tracked-On: projectacrn#1821
Signed-off-by: Shuo Liu <shuo.a.liu@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
MISRA-C requires that the function call in which the returned
value is discarded shall be clearly indicated using (void).
This patch fixes the violations related to the following
function calls.
- instr_check_gva
- vlapic_set_local_intr
- prepare_vm
- enter_s3
- emulate_instruction
- ptdev_intx_pin_remap
- register_mmio_emulation_handler
v1 -> v2:
* discard the return value of enter_s3
Tracked-On: #861
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
fix the following integer violations:
1. Signed/unsigned conversion without cast
2. Literal value requires a U suffix
3. Implicit conversion of underlying type
v3 -> v4:
* change the type of npk_loglevel/mem_loglevel/console_loglevel
from uint32_t to uint16_t
v2 -> v3:
* discard the return value of update_ept
* discard changes related to npk loglevel
v1 -> v2:
* remove the unnecessary changes related to the false positive
issues caused by scanning tool
* change the type of the local variable 'vlapic_id' from uint8_t
to uint32_t in function 'vlapic_build_id'
* change the type of the struct member 'flags' in shared_buf from
uint64_t to uint32_t
Tracked-On: #861
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
clean up mmio_read/mmio_write in instr_emul.c
- make these two functions inline
- discard the return value and add the pre condition
- rename these two functions to vie_mmio_read/vie_mmio_write
Tracked-On: #861
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
In current code, there is an out of range access to the array buses defined in struct struct context_table.
This patch defines CONFIG_IOMMU_BUS_NUM to replace CONFIG_IOMMU_INIT_BUS_LIMIT, which is clearer.
CONFIG_IOMMU_BUS_NUM equals to (CONFIG_IOMMU_INIT_BUS_LIMIT + 1).
Tracked-On: #1807
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
MISRA-C requires that the function call in which the returned
value is discarded shall be clearly indicated using (void).
This patch fixes the violations related to the following
function calls.
- vlapic_set_intr
- vlapic_intr_edge
Tracked-On: #861
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
to decrease the value of 'create_vcpus' in fail case.
Tracked-On: #861
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Misra C reqires assembly code should comply with
the rules list below:
The assembly code's functionality should match the function's
name.If not,pls encapsulate the assembly code and give a suitable
name for describing the functionality.
V1->V2:
1.remove the dead code
2.update detail comment
V2->V3:
1.replace the macro name with upper case.
2.remove the typedef and rename the struct name
"_descriptor_table_" to "descriptor_table".
Tracked-On: #861
Signed-off-by: Huihuang Shi <huihuang.shi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
this patch is to avoid posisble inconsisent states for
VMs and vCPUs in configuration that SOS is SMP based
and Device Model may be multi-threads based.
Tracked-On: #861
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
-- Config MAX_EMULATED_MMIO_REGIONS 16 in Kconfig
-- Add emulated mmio array and emulated mmio regions
in vm structure
-- Remove mmio list in vm structure
-- Remove unregister_mmio_emulation_handler and
vioapic_cleanup APIs
Tracked-On: #861
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Branch addressing using registers or memory operands must be prefixed by
a '*' in AT&T ASM language.
This change is to fix these warnings:
arch/x86/cpu.c:409: Warning: indirect call without `*'
arch/x86/cpu.c:553: Warning: indirect call without `*'
arch/x86/trampoline.S:168: Warning: indirect jmp without `*'
Ref: https://csiflabs.cs.ucdavis.edu/~ssdavis/50/att-syntax.htm
Tracked-On: #1764
Signed-off-by: Xinyun Liu <xinyun.liu@intel.com>
Reviewed-By: Yin Fengwei <fengwei.yin@intel.com>
The cpu model name of "Intel(R) Celeron(R) CPU N3350 @ 1.10GHz" is used in
APL UP2 board, which is in Acrn official support list.
Tracked-On: #1767
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
-- Add emulated port io index
-- Add emulated pio array in vm structure
-- Remove port list in vm structure
-- Remove free_io_emulation_resource/register_io_handler/
create_io_handler APIs
v2-->v3:
-- not add 'is_emulated', check len == 0U
-- Check if io_read/io_write handler is NULL before calling
-- Replace ENUM with MACRO for emulated pio index to avoid
MISRA-C violations
v1-->v2:
-- Remove EMUL_PIO_NUM in Kconfig, add emulated pio index
for PIC/PCI/UART/RTC/PM
Tracked-On: #861
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Current, SNP control bit is only set in ept_mr_add for cacheable memory.
However, memory type for VM0 is added as uncacheable type.
So SNP control is not set for VM0.
Add code to set SNP control bit for cacheable memory when ept modification.
Tracked-On: #1762
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Reviewed-by: Li, Fei1 <fei1.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
MISRA-C requires that the controlling expression of an if statement or
an iteration-statement shall be Boolean type.
v1 -> v2:
* update the U suffix of constant to let the type of operands
to bit operations (&) is the same.
* update the type of 'i' from uint64_t to uint16_t in
'profiling_set_control' since it is limited by phys_cpu_num,
which is uint16_t.
Tracked-On: #861
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
When a macro is expanded, the two tokens on either side of each ‘##’ operator
are combined into a single token, which then replaces the ‘##’ and the two
original tokens in the macro expansion. So we need use CAT__ to expand the
__LINE__ MACRO and use CAT_ to combine the expaneded MACRO.
Tracked-on: #1750
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Use pre-defined inline function for pci bus/slot/function calculation.
Tracked-on: #1747
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
It is not necessary to use atomic operation to
set the initial value for 'created_vcpu' in vm structure.
Tracked-On: #861
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
- Fix the integer violations related to the following rules:
1. The operands to shift operations (<<, >>) shall be unsigned
integers.
2. The operands to bit operations (&, |, ~) shall be unsigned
integers.
- Replace 12U with CPU_PAGE_SHIFT when it is address shift case.
v1 -> v2:
* use existed MACRO to get bus/slot/func values
* update PCI_SLOT MACRO to make it more straightforward
* remove the incorrect replacement of 12U with CPU_PAGE_SHIFT
dmar_fault_msi_write
Tracked-On: #861
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
For data structure types "struct vm", its name is identical
with variable name in the same scope. This is a MISRA C violation.
Naming convention rule:If the data structure type is used by multi
modules, its corresponding logic resource is exposed to external
components (such as SOS, UOS), and its name meaning is simplistic
(such as vcpu, vm), its name needs prefix "acrn_".
The following udpates are made:
struct vm *vm-->struct acrn_vm *vm
Tracked-On: #861
Signed-off-by: Xiangyang Wu <xiangyang.wu@linux.intel.com>
For data structure types "struct vcpu_arch", its name
shall follow Naming convention.
Naming convention rule:If the data structure type is
used by multi modules, its corresponding logic resource
is exposed to external components (such as SOS, UOS),
and its name meaning is simplistic (such as vcpu, vm),
its name needs prefix "acrn_". Variable name can be
shortened from its data structure type name.
The following udpates are made:
struct vcpu_arch arch_vcpu-->struct acrn_vcpu_arch arch
Tracked-On: #861
Signed-off-by: Xiangyang Wu <xiangyang.wu@linux.intel.com>
For data structure types "struct vcpu", its name is identical
with variable name in the same scope. This is a MISRA C violation.
Naming convention rule:If the data structure type is used by multi
modules, its corresponding logic resource is exposed to external
components (such as SOS, UOS), and its name meaning is simplistic
(such as vcpu, vm), its name needs prefix "acrn_".
The following udpates are made:
struct vcpu *vcpu-->struct acrn_vcpu *vcpu
Tracked-On: #861
Signed-off-by: Xiangyang Wu <xiangyang.wu@linux.intel.com>
This patch adds more comments to describe the structures and functions that are
public to the other components in the hypervisor. The comments are in
doxygen-style for document generation.
v2 -> v3:
* Reformat the flow in the doc for vhm_io_request.
v1 -> v2:
* Fix typos and inconsistencies in the comments.
* Wrap the text-based diagram in the doc for vhm_request in @verbatim
Tracked-On: #1595
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
Unmap the trusty EPT mapping when destroy_secure_world. The reason is
now the normal world and trusty will share the PD and PT page. Before
we add the mapping for each world, we should unmap it from another world.
Besides, fix a minor bug for condition priority.
Tracked-On: #861
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
ACRN, in partition mode, supports LAPIC pass-thru to guests. Guest needs
to use x2APIC mode of LAPIC for pass-thru to be enabled.
ACRN also needs the user to configure lapic_pt to true in vm_desc
for the VM.
Interrupt Command Register (ICR) is the only APIC register that is
intercepted. Reference code in partition/vm_description.c enables
LAPIC pass-thru for vm2.
Tracked-On: #1626
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Reviewed-by: Xu Anthony <anthony.xu@intel.com>
ACRN does not support platforms that do not have x2APIC mode of LAPIC
in hardware. With this patch, x2APIC is exposed to guests by default.
Extended Topology Leaf 0xb in cpuid returns x2APIC ID and topology
information to OS. This patch adds support to return guest topology
and guest x2APIC ID. Number of SMT siblings is returned as 0.
Tracked-On: #1626
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Reviewed-by: Xu Anthony <anthony.xu@intel.com>
This patch adds support for self-IPI virtualization when guest
uses vLAPIC in x2APIC mode.
Tracked-On: #1626
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Reviewed-by: Xu Anthony <anthony.xu@intel.com>
When guest switches from xAPIC mode to x2APIC mode of vLAPIC operation,
MSRs are used to access vLAPIC. This patch adds APICv support for
MSR accesses to vLAPIC. Switching from xAPIC to x2APIC is supported via
APIC BASE MSR. Other modifications like disabling and switching back to
xAPIC are not supported.
Tracked-On: #1626
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Reviewed-by: Xu Anthony <anthony.xu@intel.com>
This patch adds support to return APIC ID if guest uses vLAPIC
in x2APIC mode.
Tracked-On: #1626
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Reviewed-by: Xu Anthony <anthony.xu@intel.com>
