Even in partition mode, we also need to clear vmid in vmid_bitmap to
indicate the VM is not present.
Tracked-On: projectacrn#1821
Signed-off-by: Shuo Liu <shuo.a.liu@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
MISRA-C requires that the function call in which the returned
value is discarded shall be clearly indicated using (void).
This patch fixes the violations related to the following
function calls.
- instr_check_gva
- vlapic_set_local_intr
- prepare_vm
- enter_s3
- emulate_instruction
- ptdev_intx_pin_remap
- register_mmio_emulation_handler
v1 -> v2:
* discard the return value of enter_s3
Tracked-On: #861
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
fix the following integer violations:
1. Signed/unsigned conversion without cast
2. Literal value requires a U suffix
3. Implicit conversion of underlying type
v3 -> v4:
* change the type of npk_loglevel/mem_loglevel/console_loglevel
from uint32_t to uint16_t
v2 -> v3:
* discard the return value of update_ept
* discard changes related to npk loglevel
v1 -> v2:
* remove the unnecessary changes related to the false positive
issues caused by scanning tool
* change the type of the local variable 'vlapic_id' from uint8_t
to uint32_t in function 'vlapic_build_id'
* change the type of the struct member 'flags' in shared_buf from
uint64_t to uint32_t
Tracked-On: #861
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
clean up mmio_read/mmio_write in instr_emul.c
- make these two functions inline
- discard the return value and add the pre condition
- rename these two functions to vie_mmio_read/vie_mmio_write
Tracked-On: #861
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
MISRA-C requires that the function call in which the returned
value is discarded shall be clearly indicated using (void).
This patch fixes the violations related to the following
function calls.
- vlapic_set_intr
- vlapic_intr_edge
Tracked-On: #861
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
to decrease the value of 'create_vcpus' in fail case.
Tracked-On: #861
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
this patch is to avoid posisble inconsisent states for
VMs and vCPUs in configuration that SOS is SMP based
and Device Model may be multi-threads based.
Tracked-On: #861
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
-- Config MAX_EMULATED_MMIO_REGIONS 16 in Kconfig
-- Add emulated mmio array and emulated mmio regions
in vm structure
-- Remove mmio list in vm structure
-- Remove unregister_mmio_emulation_handler and
vioapic_cleanup APIs
Tracked-On: #861
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
-- Add emulated port io index
-- Add emulated pio array in vm structure
-- Remove port list in vm structure
-- Remove free_io_emulation_resource/register_io_handler/
create_io_handler APIs
v2-->v3:
-- not add 'is_emulated', check len == 0U
-- Check if io_read/io_write handler is NULL before calling
-- Replace ENUM with MACRO for emulated pio index to avoid
MISRA-C violations
v1-->v2:
-- Remove EMUL_PIO_NUM in Kconfig, add emulated pio index
for PIC/PCI/UART/RTC/PM
Tracked-On: #861
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
MISRA-C requires that the controlling expression of an if statement or
an iteration-statement shall be Boolean type.
v1 -> v2:
* update the U suffix of constant to let the type of operands
to bit operations (&) is the same.
* update the type of 'i' from uint64_t to uint16_t in
'profiling_set_control' since it is limited by phys_cpu_num,
which is uint16_t.
Tracked-On: #861
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
It is not necessary to use atomic operation to
set the initial value for 'created_vcpu' in vm structure.
Tracked-On: #861
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
- Fix the integer violations related to the following rules:
1. The operands to shift operations (<<, >>) shall be unsigned
integers.
2. The operands to bit operations (&, |, ~) shall be unsigned
integers.
- Replace 12U with CPU_PAGE_SHIFT when it is address shift case.
v1 -> v2:
* use existed MACRO to get bus/slot/func values
* update PCI_SLOT MACRO to make it more straightforward
* remove the incorrect replacement of 12U with CPU_PAGE_SHIFT
dmar_fault_msi_write
Tracked-On: #861
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
For data structure types "struct vm", its name is identical
with variable name in the same scope. This is a MISRA C violation.
Naming convention rule:If the data structure type is used by multi
modules, its corresponding logic resource is exposed to external
components (such as SOS, UOS), and its name meaning is simplistic
(such as vcpu, vm), its name needs prefix "acrn_".
The following udpates are made:
struct vm *vm-->struct acrn_vm *vm
Tracked-On: #861
Signed-off-by: Xiangyang Wu <xiangyang.wu@linux.intel.com>
For data structure types "struct vcpu_arch", its name
shall follow Naming convention.
Naming convention rule:If the data structure type is
used by multi modules, its corresponding logic resource
is exposed to external components (such as SOS, UOS),
and its name meaning is simplistic (such as vcpu, vm),
its name needs prefix "acrn_". Variable name can be
shortened from its data structure type name.
The following udpates are made:
struct vcpu_arch arch_vcpu-->struct acrn_vcpu_arch arch
Tracked-On: #861
Signed-off-by: Xiangyang Wu <xiangyang.wu@linux.intel.com>
For data structure types "struct vcpu", its name is identical
with variable name in the same scope. This is a MISRA C violation.
Naming convention rule:If the data structure type is used by multi
modules, its corresponding logic resource is exposed to external
components (such as SOS, UOS), and its name meaning is simplistic
(such as vcpu, vm), its name needs prefix "acrn_".
The following udpates are made:
struct vcpu *vcpu-->struct acrn_vcpu *vcpu
Tracked-On: #861
Signed-off-by: Xiangyang Wu <xiangyang.wu@linux.intel.com>
ACRN, in partition mode, supports LAPIC pass-thru to guests. Guest needs
to use x2APIC mode of LAPIC for pass-thru to be enabled.
ACRN also needs the user to configure lapic_pt to true in vm_desc
for the VM.
Interrupt Command Register (ICR) is the only APIC register that is
intercepted. Reference code in partition/vm_description.c enables
LAPIC pass-thru for vm2.
Tracked-On: #1626
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Reviewed-by: Xu Anthony <anthony.xu@intel.com>
This patch adds support for self-IPI virtualization when guest
uses vLAPIC in x2APIC mode.
Tracked-On: #1626
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Reviewed-by: Xu Anthony <anthony.xu@intel.com>
When guest switches from xAPIC mode to x2APIC mode of vLAPIC operation,
MSRs are used to access vLAPIC. This patch adds APICv support for
MSR accesses to vLAPIC. Switching from xAPIC to x2APIC is supported via
APIC BASE MSR. Other modifications like disabling and switching back to
xAPIC are not supported.
Tracked-On: #1626
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Reviewed-by: Xu Anthony <anthony.xu@intel.com>
This patch adds support to return APIC ID if guest uses vLAPIC
in x2APIC mode.
Tracked-On: #1626
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Reviewed-by: Xu Anthony <anthony.xu@intel.com>
This patch converts x2APIC MSR accesses to corresponding LAPIC MMIO offset to
utitlize vlapic_write/read APIs to virtualize LAPIC. Also adds support to inject
GP fault when read-only registers are attempted to be written to or vice versa.
Tracked-On: #1626
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Reviewed-by: Xu Anthony <anthony.xu@intel.com>
When guest uses vLAPIC in x2APIC mode, ICR write is a single MSR write.
Also, the destination field for device interrupts and IPIs should not be
handled in the same way as xAPIC mode. This patch adds support for x2APIC
mode operation of guest vLAPIC.
Tracked-On: #1626
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Reviewed-by: Xu Anthony <anthony.xu@intel.com>
x2APIC ID and LDR are in different format compared to xAPIC mode of operation.
This patch adds code to build ID and LDR when guest uses vLAPIC in x2APIC mode.
Tracked-On: #1626
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Reviewed-by: Xu Anthony <anthony.xu@intel.com>
Extending enable_msr_interception to accept mode as input. Mode specifies
if the API user wants ACRN to intercept on read-only or write-only or both
read and write or disable MSR interception altogether.
Tracked-On: #1626
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Reviewed-by: Xu Anthony <anthony.xu@intel.com>
Accessing x2APIC MSRs in xAPIC mode should result in GP exception according
to SDM section 10.12.2. Adding support to ACRN to inject GP into guests for
the same reason.
Tracked-On: #1626
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Reviewed-by: Xu Anthony <anthony.xu@intel.com>
Replace dynamic memory allocation in memory management with static memory allocation.
Since the static memory allocation can guarantee the allocation never failed, so
split_large_page and construct_pgentry don't need to return a errno any more.
Besides, the destroy_ept don't need to free page any more. Instead, it would memset
the eptp to 0 to make sure we can't walk this paging table again.
Tracked-On: #861
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Add static paging table allocation API for hypervisor.
Note: must configure PLATFORM_RAM_SIZE and PLATFORM_MMIO_SIZE exactly as the platform.
Rename RAM_START/RAM_SIZE to HV_RAM_START/HV_RAM_SIZE for HV.
Tracked-On: #861
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
add size check for other hypervisor console command;
they could be overflow for shell log buffer output.
Tracked-On: #1587
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
After enabling vPCI in hypervisor for vm0, UOS may not able be launched
successfully. Consider this scenario (take MSI-X for example):
- DM makes hypercall to hypervisor to do MSI-X remapping on behalf of
UOS guests.
- After the hypercall, VHM module in SOS kernel updates the physical
MSI-X table with the physical Message Data/Addr.
- These MMIO write requests are intercepted by hypervisor, which will
call ptdev_msix_remap() to do MSI-S remapping.
It may fail due to 2 possible reasons:
1) wrong target VM because:
hypervisor thinks it's a VM0 MSI-X device but they have been registered
as UOS guests through HC_SET_PTDEV_INTR_INFO hypercall.
2) wrong ptdev_msi_info->vmsi_data because:
The virtual MSI-X table is supposed to hold virtual Message data/addr
but the SOS VHM writes the physical ones to it.
This patch resolves these problems by ignoring the HC_VM_PCI_MSIX_REMAP
hypercall, so virtual and physical Message Data are the same from SOS'
perspective and it won't mess up the virtual PCI device in HV.
Also in HC_SET_PTDEV_INTR_INFO handler, vpci updates the target VM
when the PCI devices are assigned to different VMs.
The UOS' MSI/MSI-X remapping is triggered by hypervisor when SOS (either
DM or VHM) updates the Message Data/Addr.
Tracked-On: #1568
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Signed-off-by: Zide Chen <zide.chen@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
For SOS BSP, we reuse native saved cs.limit
For UOS BSP, we set cs.limit in DM
For AP, we use initialized data from realmode_init_regs.
Tracked-On: #1231
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Eddie Dong <Eddie.dong@intel.com>
- flush L1 cache before VM entry only on platform
affected by L1TF
- flush operation is configurable by below MACRO:
--CONFIG_L1D_FLUSH_VMENTRY_ENABLED
Tracked-On: #1672
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
The operands to shift operations (<<, >>) shall be unsigned integers.
v1 -> v2:
* replace 12U with CPU_PAGE_SHIFT when it is address shift case.
* replace 6UL with 0x6UL
Tracked-On: #861
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Guest OS can use vLAPIC in x2APIC mode. Upon vlapic_reset, vLAPIC should
be set to xAPIC mode.
Tracked-On: #1626
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Functions shall not call themselves, either directly or indirectly.
V1->V2:
add pre-assumption.
V2->V3:
when vector < 16,call vlapic_set_error
Tracked-On: #861
Signed-off-by: Huihuang Shi <huihuang.shi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Currently we compare vcpu_id with phys_cpu_num,
vcpu_id is not related with phys_cpu_num,
this patch cleanup them.
Tracked-On: #861
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Li, Fei1 <fei1.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This patch adds support to sep/socwatch profiling
Adds 2 new files include/arch/x86/profiling.h and arch/x86/profiling.c
which contains most of the implementation for profiling,most of the functions
in profiling.c have dummy implementation and will be implemented in next patches
a. cpu.c, Initial profiling setup is done as part of bsp_boot_post
and cpu_secondary_post flow
b. vmcall.c, New ioctl is added for performing profiling related
operations in vmcall_vmexit_handler
ioctl - HC_PROFILING_OPS
function - hcall_profiling_ops()
c. common/hypercall.c, hcall_profiling_ops() implementation.
d. hv_main.c, In vcpu_thread calling profiling related functions
to save vm context
e. acrn_hv_defs.h, list all the profiling command types
Tracked-On: projectacrn#1409
Acked-by: Eddie Dong <eddie.dong@intel.com>
Signed-off-by: Chinthapally, Manisha <manisha.chinthapally@intel.com>
Fix violations whose parameter can be read-only.
This patch only fix the parameter whose name is vcpu.
Tracked-On: #861
Signed-off-by: Huihuang Shi <huihuang.shi@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Fix violations for function whose parameter can be read-only.
Tracked-On: #861
Signed-off-by: Huihuang Shi <huihuang.shi@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
guest software loading is per VM instead of vcpu. So we move it
from prepare_vcpu to prepare_vm. And make sure it's called for
all VMs for partition mode.
Tracked-On: #1565
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
All the platforms supported by ACRN supports x2APIC. So enabled
x2APIC for ACRN hv. Removed any code that is needed for xAPIC mode
of operation.
Tracked-On: #1455
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
Reviewed by: Yonghua Huang <yonghua.huang@intel.com>
There's no need to walk these paging tables to transfer HPA to GPA
for a VM, so remove it.
Tracked-On: #1124
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Pointer param should be declared pointer to const if
the parameter is keeped read-only.
This patch changes pointer param whose name is vm.
Tracked-On:#861
Signed-off-by: Huihuang Shi <huihuang.shi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
-- Not return NULL for vcpu_from_vid
We have replaced dynamic memory with static memory for vcpu,
then if vcpu_id is valid, this API should not return NULL.
-- Simplify the for-loop when walk through the vcpu
Tracked-On: #861
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Li, Fei1 <fei1.li@intel.com>
Reviewed-by: Anthony Xu <anthony.xu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Replace platform_acpi_info.c with platform_acpi_info.h and define needed
host ACPI info in MACROs. Then the struct host_acpi_info is not needed
any more.
This header file should be generated by offline tool automatically;
Tracked-On: #1500
Signed-off-by: Victor Sun <victor.sun@intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
All the platforms supported by ACRN supports x2APIC. So enabled
x2APIC for ACRN hv. Removed any code that is needed for xAPIC mode
of operation.
Tracked-On: #1455
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
Reviewed by: Yonghua Huang <yonghua.huang@intel.com>
Return value should be checked,fix it by add
"void" when the function return value is not used.
V1->V2:
replace printf with pr_warn.
V2->V3:
change the commit to make read easily.
Tracked-On:#861
Signed-off-by: Huihuang Shi <huihuang.shi@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
MISRA-C required the suffix(U/UL), such as:
(1) ---> (1U)
(1) ---> (1UL)
(1U << 0) ---> (1U << 0U)
This patch will add the suffix(U/UL) to come up MISRA-C into
hypervisor/include directory.
Tracked-On: #1468
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
to enable APICv Posted interrupt supported, following the
specifications defined in Intel SDM Section #29.6, Volume3.
Posted-interrupt processing is a feature by which a processor
processes the virtual interrupts by recording them as pending
on the virtual-APIC page.
Injecting interrupts to VCPU from remote CPU without causing
VM exit on the destination, following steps in SDM Section 29.6,volume3:
Tracked-On: #1447
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Now, UOS will use hypercall to init BSP state, we could remove
set_bsp_real_mode_entry() and set_bsp_protect_mode_regs().
For SOS, GDT will inherit from SBL or UEFI. For UOS, DM will
prepare GDT. We don't need hypervisor to prepare GDT for guest.
The entry_addr of vcpu struct could be removed. The guest entry
is set through BSP rip register.
GUEST_CFG_OFFSET is not needed any more after this patchset.
Tracked-On: #1231
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Move vcpu mode set to function vcpu_set_regs.
Tracked-On: #1231
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
For UOS, there is no BSP init state saved in hv. We always need
DM to set BSP init state by using hypercall. So we can't auto
start vm during vm reset.
Tracked-On: #1231
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Now, we make UOS to set BSP init state by using hypercall. We
could drop the old UOS loader in HV and make vm loader in HV
only for SOS.
Tracked-On: #1231
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
DM will use this hypercall to initialize the UOS BSP state.
Tracked-On: #1231
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The vcpu state is initialized outside of init_guest_state:
- SOS BSP state is initialized in SOS loader
- UOS BSP state is initialized in UOS loader
- AP state is initialized during SIPI signal emulation
We could make init_guest_state only update the vcpu state
to VMCS structure.
Tracked-On: #1231
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
NOTE: this patch is only workaround patch for UOS BSP state init.
Eventually, the DM will call hypercall to init UOS BSP state.
We use this workaround patch here to simplify the init_guest_state.
Will make the caller of init_guest_state calls init_guest_vmx
directly.
Tracked-On: #1231
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
With reset_vcpu_regs as pre-condition, we only need to set
cs_selector and cs_base for AP.
We call set_ap_entry in two places:
1. When emulation AP SIPI
2. When sos BSP resume from S3. The BSP is resumed to real
mode with entry set to wakeup_vec. We call set_ap_entry
API here with entry twisted from wakeup_vec.
Tracked-On: #1231
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This reset_vcpu_regs function will reset the vcpu registers to
default value: realmode with entry 0xFFFFFFF0
Make call to reset_vcpu_regs during create_vcpu and reset_vcpu
Tracked-On: #1231
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
If defined CONFIG_VM0_DESC, HV will use predefined vm0_desc
to config VM0,now it is unneccessary, then remove these code.
Tracked-On: #861
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Li, Fei1 <fei1.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
- add missing brackets for 'if/else' statements based on MISRA-C
requirements
v1 -> v2:
* add brackets for each conditions in 'if' statements to improve
the readability
* modify 'ptdev_init' to make the logic clearer
Tracked-On: #861
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
In the current hypervisor design, when HPA is not
found for the specified gpa by calling gpa2hpa or
local_gpa2hpa, 0 will be returned as a error code,
but 0 may be a valid HPA for vm0; error checking
is missed when invoking gpa2hpa or local_gpa2hpa;
when invoking lookup_address, the caller guarantees
that parameter pointer pml4_page and pointer pg_size
is not NULL.
If local_gpa2hpa/gpa2hpa returns a invalid HPA,
it means that this function fails to find the
HPA of the specified gpa of vm. If local_gpa2hpa/gpa2hpa
return value is a valid HPA, it means that this
function have found the HPA of the specified gpa of vm.
Each valid vm's EPTP is initialized during vm creating,
vm's EPTP is valid until this vm is destroyed. So the caller
can guarantee parameter pointer pml4_page is not NULL.
The caller uses a temporary variable to store page size.
So the caller can guarantee parameter pointer pg_size
is not NULL.
In this patch, define a invalid HPA for gpa2hpa and
local_gpa2hpa;add some error checking when invoking
local_gpa2hpa/gpa2hpa;add precondition for lookup_address
function and remove redundant error checking.
V1-->V2:
Define INVALID_HPA as a invalid HPA for gpa2hpa
and local_gpa2hpa;
Updated related error checking when invoking
gpa2hpa or local_gpa2hpa;
V2-->V3:
Add some debug information if specified gpa2hpa
mapping doesn't exit and ept_mr_del is called;
Update INVALID_HPA definition easier to be reviewed.
V3-->V4:
Add vm->id and gpa into pr_error;
Add precondition to ept_mr_del to cover [gpa,gpa+size)
unmapping case.
V4-->V5:
Update comments;
Update pr_error message.
Tracked-On: #1258
Signed-off-by: Xiangyang Wu <xiangyang.wu@linux.intel.com>
Reviewed-by: Li, Fei1 <fei1.li@intel.com>
1.Function return type inconsistent
2.cast on a constant value
V1->V2 add () to return type
V2->V3 keep the sbuf_get and sbuf_put return code
Tracked-On: #861
Signed-off-by: Huihuang Shi <huihuang.shi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Expression should be boolean immediate before 'if','while' key-words.
V1->V2 add () to bool expression
Tracked-On: #861
Signed-off-by: Huihuang Shi <huihuang.shi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
add is_long_mode to check whether the processor is operating in IA-32e mode
add is_paging_enabled to check whether paging is enabled
add is_pae to check whether physical address extension is enabled.
Tracked-On: #1379
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Loop the global vm_array[] instead of the vm_list.
Tracked-On: #861
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
-- Replace dynamic memory allocation with static memory
-- Remove the parameter check if the vm is NULL
Tracked-On: #861
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This patch is ready for next one,we will switch from
pointer to embedded structures such as structure vcpu,
some const qualifiers can be improper and raise compilation errors,
this patch remove const qualifier for struct vm.
Tracked-On: #861
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
There are chances that names with leading underscore declared by
developers are conflict with the ones reserved for the compiler.
What this patch does:
- rename these functions/variables/macros starting with
underscore to avoid such unintentational mistakes.
- remove gpr.h without any contents
Tracked-On: #861
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Add struct acrn_vcpu_regs and make struct boot_ctx based on
struct acrn_vcpu_regs.
vm0_boot_context is also changed from struct boot_ctx to struct
acrn_vcpu_regs.
Tracked-On: #1231
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
struct seg_desc_vmcs is actually for segment descriptor vmcs fields.
Change its name to vmcs_seg_field
Tracked-On: #1231
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The printf related functions have been called by other various
functions, e.g. get_ptdev_info(), get_ioapic_info, etc. The patch
is used to clear up the usage.
Tracked-On: #861
Signed-off-by: Junjun Shan <junjun.shan@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
1. The wrong operand size is assigned in instruction decode phase
if the operand size is 1 byte.
According to the SDM, the bit 0(w bit) of opcode should be checked
first to detect whether the operand size is 1 byte. Then, check
whether there is prefix to overwrite the default operand size.
The original instruction decode doesn't care about the operand
size. But do opsize fixup during instruction emulation phase.
With ACRN we need operand size packed to ioreq and send to DM
after instruction decode.
2. We should always touch the GPA by following opsize to avoid side
effect (especially when GPA is for a MMIO).
Tracked-On: #1337
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
This patch fixes the following issue pointed by Xiangyang and Junjie.
There are some macro arguments acting as formal parameter names.
Drop such arguments since they make no difference to the expanded
implementation and they might confuse some developers.
Here is an example.
'ptr' is dropped in this patch, which is acting as a formal parameter
name and make no difference to the expanded implementation.
-#define build_atomic_load(name, size, type, ptr) \
+#define build_atomic_load(name, size, type) \
static inline type name(const volatile type *ptr) \
{ \
type ret; \
asm volatile("mov" size " %1,%0" \
: "=r" (ret) \
: "m" (*ptr) \
: "cc", "memory"); \
return ret; \
}
Some minor coding style fixes are also included in this patch.
- use TAB for the alignment rather than mixing TAB with space
- fix some typo in the comments
Tracked-On: #861
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
merge hv_lib.h and hypervisor.h into one file
Tracked-On: #861
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Fix the compiler warning and turn on the flag to make
compiler warning as compiler error.
Tracked-On: #1343
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Currently the acrn-hypervisor is using the PLATFORM_IPI vector to notify
the sos_kernel. And then sos_kernel will handle the notification from acrn
hypervisor in PLATFORM_IPI ISR. But as the PLATFORM_IPI ISR can be registered
by the other modules, it will have the conflict when trying to register
acrn intr ISR. So the HYPERVISOR_CALLBACK_VECTOR will be used instead.
In order to switch the notification vector from PLATFORM_IPI to
HYPERVISOR_CALLBACK_VECTOR, one API is added so that sos can configure
the up-notifier interrrupt vector.
Tracked-On: https://github.com/projectacrn/acrn-hypervisor/issues/1325
Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
MISRAC checks whether a variable is assigned a value not used in
all branches of a program. Var value which is unused on all paths
can be removed with a consequent improvement in the readability
and efficiency of the code. This patch is used to fix these
violations.
Tracked-On: #861
Signed-off-by: Junjun Shan <junjun.shan@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
MISRA-C requires that there should be no unused parameters in
functions.
In some cases, we will keep the unused parameters.
vmexit handler is one example. It is used as function pointer.
Some of the vmexit handlers use the input parameter 'vcpu', some of
them don't. We still need to keep the unused parameters 'vcpu' for
those handlers don't use 'vcpu'.
This patch removes the unused parameters that is not being used
unconditionally.
v1 -> v2:
* remove the non-implemented API 'vlapic_id_write_handler'
Tracked-On: #861
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
MISRA-C requires that every switch case shall be terminated with break
to avoid the unintentional fall through.
The code will become redundant if we enforce this rule.
So, we will keep the current implementation for the following two cases.
1. The fall through is intentional.
2. The function is returned in the switch case.
If we decide to eliminate the mutiple returns in one function later,
this case would be handled properly at that time.
What this patch does:
- add the mssing break for the default case
- add the pre condition for some functions and remove the corresponding
panic which will never happen since the function caller could guarantee
the pre condition based on the code implementation
v1 -> v2:
* remove the redundant cases above default in 'vlapic_get_lvtptr'
* add the similar pre condition for 'lvt_off_to_idx' as
'vlapic_get_lvtptr' since all the function callers could guarantee it
* remove the assertion in 'lvt_off_to_idx' since the pre condition
could guarantee that the assertion will never happen
* add the similar pre condition for 'vpic_set_irqstate' as
'vioapic_set_irqstate' since all the function callers could guarantee it
* remove the assertion in 'vpic_set_irqstate' since the pre condition
could guarantee that the assertion will never happen
Tracked-On: #861
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
The hypercall can be used by SOS/DM to monitor UOS
pass-thru devices' interrupt data; and if an "interrupt
storm" happens in UOS, it can be used to delay the UOS
PTdev interrupt's injection for sometime.
The two functions are implemented by one hypercall with
two sub-commands, and with the data/params in the buffer.
Tracked-On: #866
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
This patch is to enhance the feature of "interrupt storm
mitigation"; when interrupt storm happens on one UOS
it should keep as smaller effect to SOS as possible.
Add variables in PTdev entry & VM, used to record one
UOS's pass-thru devices' interrupt data; add a function
to collect the data.
Also add a timer used to delay UOS pass-thru devices'
interrupt injection if an "interrupt storm" detected
by SOS.
Tracked-On: #866
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Reviewed-by: Li Fei1 <fei1.li@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
- use sizeof(struct lapic_regs),instead of arbitrary size
to lear 'apic_page' memory region in vlapic.c
- fix potential buffer overflow issues in vpic.c & ioapic.c
Tracked-On: #1252
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
MISRAC has requirement about implict conversion: actual to formal
param. This patch is used to fix part of these violations.
1.Add a new structure seg_desc_vmcs to hold the VMCS field address of
segment selector to clean up seg_desc structure.
2.Add the definition of maximum MSI entry and the relevant judgement.
3.The violations in shell.c, logmsg.c will be fixed in other series of
patches with modification of function snprintf(), vsnprintf() and other
related usages.
v1->v2:
*Move the definition of struct seg_desc_vmcs from instr_emul.h to
instr_emul.c.
*Modify the formal parameter type in function definition from uint8_t
to char instead of using cast.
*Drop the const declaration for char data in formal parameter.
v2->v3:
*update the data missing conversion.
*change type of internal parameter len to avoid casting in npklog.c.
*change the conversion from signed char to unsigned int in
uart16550_getc() to solve sign-extension.
Tracked-On: #861
Signed-off-by: Junjun Shan <junjun.shan@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
In the current hypervisor hypercall, first all vcpu is
allocated to SOS, vcpu's vm field is initialized to vm0.
When the vcpu is offlined, vcpu will be paused and vcpu's
vm field is set as NULL by DM. When UOS is created, vcpu's
vm field is set as UOS's vm. So when vmcall_vmexit_handler
is invoked, vcpu's vm filed is always non-NULL.
error checking for vm pointer is done in the function
"vmcall_vmexit_handler", vmcall_vmexit_handler will
guarantee that vm is vm0.
So all hypercall functions (these functions is just for handler
hypercall, except vmcall_vmexit_handler) don't need to check
whether invoking vm is NULL and don't need to check whether
invoking vm is vm0 or not.
Remove related invoking vm error checking for hypercall handling.
V1 --> V2:
Add pre-condition for hypercall in the head file.
V2 --> V3:
Add pre-condition for copy_from_gpa and copy_to_gpa.
V3 --> V4:
Add pre-condition both in the head file and source file.
Tracked-On:#1258
Signed-off-by: Xiangyang Wu <xiangyang.wu@linux.intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The vie->opcode should be updated when decode_two_byte_opcode(),
otherwise for two bytes opcode emulate(movzx/movsx) will fail.
Signed-off-by: Qi Yadong <yadong.qi@intel.com>
MISRAC has requirements about literal value requires a U suffix and
signed/unsigned conversion with cast. This patch is used to solve
these violations.
v1->v2
*Drop the cast of sz from uint32_t to int32_t, the signed/unsigned
violation of nchars will be solved by other patch together with
printf/sprintf/console/vuart/uart code.
*Delete the unnecessary L suffix of shifting operand.
Tracked-On: #861
Signed-off-by: Junjun Shan <junjun.shan@intel.com>
Reviewed by: Junjie Mao <junjie.mao@intel.com>
According to SDM 4.6 Access Rights definition, if SMAP/SMEP
is enabled, more conditions are used to decide the access rights
like SMAP/SMEP, EFLAGS.AC, R/W bit in every paging-structure entry
for page walking.
This patch add the check to guest page walking function and inject
page fault accordingly.
Tracked-On: #1207
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
The current movs emulation has issues:
1. it use gva to get/put data.
2. it only support src and dst operand are memory which does not
apply to our case (one of them should be mmio and triggers
EPT voilation).
This patch fix the issue by:
1. convert the address from gva to hva before access it.
2. handle mmio emulation.
Also fix the issue introduced by previous instruction reshuffle
patchset:
1. the desc validation should be only applied to none-64bit mode.
2. gva2gpa should be given correct guest virtual address.
Specailly for movs, we cache the dst gpa if the check during
movs decoding success. And use it directly during movs
emulation.
Tracked-On: #1207
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Tested-by: Qi Yadong <yadog.qi@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
-- update 'vlapic' in 'struct vcpu_arch' from pointer
to instance
-- add inline function(vcpu_vlapic) in vcpu.h
Tracked-On: #861
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
