We have trapped the #DB for split-lock emulation.
Only fault exception need RIP being retained.
Tracked-On: #5605
Signed-off-by: Jie Deng <jie.deng@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
xchg may also cause the #AC for split-lock check.
This patch adds this emulation.
1. Kick other vcpus of the guest to stop execution
if the guest has more than one vcpu.
2. Emulate the xchg instruction.
3. Notify other vcpus (if any) to restart execution.
Tracked-On: #5605
Signed-off-by: Jie Deng <jie.deng@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This patch adds the split-lock emulation.
If a #AC is caused by instruction with LOCK prefix then
emulate it, otherwise, inject it back as it used to be.
1. Kick other vcpus of the guest to stop execution
and set the TF flag to have #DB if the guest has more
than one vcpu.
2. Skip over the LOCK prefix and resume the current
vcpu back to guest for execution.
3. Notify other vcpus to restart exception at the end
of handling the #DB since we have completed
the LOCK prefix instruction emulation.
Tracked-On: #5605
Signed-off-by: Jie Deng <jie.deng@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Check hardware support for all features in CR4,
and hide bits from guest by vcpuid if they're not supported
for guests OS.
Tracked-On: #5586
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
- The current code to virtualize CR0/CR4 is not
well designed, and hard to read.
This patch reshuffle the logic to make it clear
and classify those bits into PASSTHRU,
TRAP_AND_PASSTHRU, TRAP_AND_EMULATE & reserved bits.
Tracked-On: #5586
Signed-off-by: Eddie Dong <eddie.dong@intel.com>
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
While following two styles are both correct, the 2nd one is simpler.
bool is_level_triggered;
1. if (is_level_triggered == true) {...}
2. if (is_level_triggered) {...}
This patch cleans up the style in hypervisor.
Tracked-On: #861
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
From SDM Vol.2C - XSETBV instruction description,
If CR4.OSXSAVE[bit 18] = 0,
execute "XSETBV" instruction will generate #UD exception.
From SDM Vol.3C 25.1.1,#UD exception has priority over VM exits,
So if vCPU execute "XSETBV" instruction when CR4.OSXSAVE[bit 18] = 0,
VM exits won't happen.
While hv inject #GP if vCPU execute "XSETBV" instruction
when CR4.OSXSAVE[bit 18] = 0.
It's a wrong behavior, this patch will fix the bug.
Tracked-On: #4020
Signed-off-by: Junming Liu <junming.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
It is possible for more than one vCPUs to trigger shutdown on an RTVM.
We need to avoid entering VM_READY_TO_POWEROFF state again after the
RTVM has been paused or shut down.
Also, make sure an RTVM enters VM_READY_TO_POWEROFF state before it can
be paused.
v1 -> v2:
- rename to poweroff_if_rt_vm for better clarity
Tracked-On: #5411
Signed-off-by: Peter Fang <peter.fang@intel.com>
Currently, ACRN only support shutdown when triple fault happens, because ACRN
doesn't present/emulate a virtual HW, i.e. port IO, to support shutdown. This
patch emulate a virtual shutdown component, and the vACPI method for guest OS
to use.
Pre-launched VM uses ACPI reduced HW mode, intercept the virtual sleep control/status
registers for pre-launched VMs shutdown
Tracked-On: #5411
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Like post-launched VMs, for pre-launched VMs, the ACPI reset register
is also fixed at 0xcf9 and the reset value is 0xE, so pre-launched VMs
now also use ACPI reset register for rebooting.
Tracked-On: #5411
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
More than one VM may request shutdown on the same pCPU before
shutdown_vm_from_idle() is called in the idle thread when pCPUs are
shared among VMs.
Use a per-pCPU bitmap to store all the VMIDs requesting shutdown.
v1 -> v2:
- use vm_lock to avoid a race on shutdown
Tracked-On: #5411
Signed-off-by: Peter Fang <peter.fang@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Add two Kconfig pSRAM config:
one for whether to enable the pSRAM on the platfrom or not;
another for if the pSRAM is enabled on the platform whether to enable
the pSRAM in the pre-launched RTVM.
If we enable the pSRAM on the platform, we should remove the pSRAM EPT
mapping from the SOS to prevent it could flush the pSRAM cache.
Tracked-On: #5330
Signed-off-by: Qian Wang <qian1.wang@intel.com>
1.Modified the virtual e820 table for pre-launched VM. We added a
segment for pSRAM, and thus lowmem RAM is split into two parts.
Logics are added to deal with the split.
2.Added EPT mapping of pSRAM segment for pre-launched RTVM if it
uses pSRAM.
Tracked-On: #5330
Signed-off-by: Qian Wang <qian1.wang@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
pSRAM memory should be cachable. However, it's not a RAM or a normal MMIO,
so we can't use the an exist API to do the EPT mapping and set the EPT cache
attribute to WB for it. Now we assume that SOS must assign the PSRAM area as
a whole and as a separate memory region whose base address is PSRAM_BASE_HPA.
If the hpa of the EPT mapping region is equal to PSRAM_BASE_HPA, we think this
EPT mapping is for pSRAM, we change the EPT mapping cache attribute to WB.
And fix a minor bug when SOS trap out to emulate wbinvd when pSRAM is enabled.
Tracked-On: #5330
Signed-off-by: Qian Wang <qian1.wang@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Use ept_flush_leaf_page to emulate guest WBINVD when PTCM is enabled and skip
the pSRAM in ept_flush_leaf_page.
TODO: do we need to emulate WBINVD in HV side.
Tracked-On: #5330
Signed-off-by: Qian Wang <qian1.wang@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Rename hv_access_memory_region_update to ppt_clear_user_bit to
verb + object style.
Tracked-On: #5330
Signed-off-by: Li Fei1 <fei1.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Temporarily remove NX bit of PTCM binary in pagetable during pSRAM
initialization:
1.added a function ppt_set_nx_bit to temporarily remove/restore the NX bit of
a given area in pagetable.
2.Temporarily remove NX bit of PTCM binary during pSRAM initialization to make
PTCM codes executable.
3. TODO: We may use SMP call to flush TLB and do pSRAM initilization on APs.
Tracked-On: #5330
Signed-off-by: Qian Wang <qian1.wang@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The added parse_ptct function will parse native ACPI PTCT table to
acquire information like pSRAM location/size/level and PTCM location,
and save them.
Tracked-On: #5330
Signed-off-by: Qian Wang <qian1.wang@intel.com>
1.We added a function init_psram to initialize pSRAM as well as some definitions.
Both AP and BSP shall call init_psram to make sure pSRAM is initialized, which is
required by PTCM.
BSP:
To parse PTCT and find the entry of PTCM command function, then call PTCM ABI.
AP:
Wait until BSP has done the parsing work, then call the PTCM ABI.
Synchronization of AP and BSP is ensured, both inside and outside PTCM.
2. Added calls of init_psram in init_pcpu_post to initialize pSRAM in HV booting phase
Tracked-On: #5330
Signed-off-by: Qian Wang <qian1.wang@intel.com>
According 11.5.1 Cache Control Registers and Bits, Intel SDM Vol 3,
change CR0.CD will not flush cache to insure memory coherency. So
it's not needed to call wbinvd to flush cache in ACRN Hypervisor.
That's what the guest should do.
Tracked-On: #5330
Signed-off-by: Qian Wang <qian1.wang@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Add cteate method for vmcs9900 vdev in hypercalls.
The destroy method of ivshmem is also suitable for other emulated vdev,
move it into hcall_destroy_vdev() for all emulated vdevs
Tracked-On: #5394
Signed-off-by: Tao Yuhong <yuhong.tao@intel.com>
Reviewed-by: Wang, Yu1 <yu1.wang@intel.com>
support pci-vuart type, and refine:
1.Rename init_vuart() to init_legacy_vuarts(), only init PIO type.
2.Rename deinit_vuart() to deinit_legacy_vuarts(), only deinit PIO type.
3.Move io handler code out of setup_vuart(), into init_legacy_vuarts()
4.add init_pci_vuart(), deinit_pci_vuart, for one pci vuart vdev.
and some change from requirement:
1.Increase MAX_VUART_NUM_PER_VM to 8.
Tracked-On: #5394
Signed-off-by: Tao Yuhong <yuhong.tao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Reviewed-by: Wang, Yu1 <yu1.wang@intel.com>
- Refactor pci_dev_c.py to insert devices information per VMs
- Add function to get unused vbdf form bus:dev.func 00:00.0 to 00:1F.7
Add pci devices variables to vm_configurations.c
- To pass the pci vuart information form tool, add pci_dev_num and
pci_devs initialization by tool
- Change CONFIG_SOS_VM in hypervisor/include/arch/x86/vm_config.h to
compromise vm_configurations.c
Tracked-On: #5426
Signed-off-by: Yang, Yu-chu <yu-chu.yang@intel.com>
- Since de-privilege boot is removed, we no longer need to save boot
context in boot time.
- cpu_primary_start_64 is not an entry for ACRN hypervisor any more,
and can be removed.
Tracked-On: #5197
Signed-off-by: Zide Chen <zide.chen@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
This function can be used by other modules instead of hypercall
handling only, hence move it to vlapic.c
Tracked-On: #5407
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Reviewed-by: Li, Fei <fei1.li@intel.com>
Reviewed-by: Wang, Yu1 <yu1.wang@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Now ACRN supports direct boot mode, which could be SBL/ABL, or GRUB boot.
Thus the vboot wrapper layer can be removed and the direct boot functions
don't need to be wrapped in direct_boot.c:
- remove call to init_vboot(), and call e820_alloc_memory() directly at the
time when the trampoline buffer is actually needed.
- Similarly, call CPU_IRQ_ENABLE() instead of the wrapper init_vboot_irq().
- remove get_ap_trampoline_buf(), since the existing function
get_trampoline_start16_paddr() returns the exact same value.
- merge init_general_vm_boot_info() into init_vm_boot_info().
- remove vm_sw_loader pointer, and call direct_boot_sw_loader() directly.
- move get_rsdp_ptr() from vboot_wrapper.c to multiboot.c, and remove the
wrapper over two boot modes.
Tracked-On: #5197
Signed-off-by: Zide Chen <zide.chen@intel.com>
update the help message of config SCENARIO to set 2 standard
post-launched VMs for default hybrid_rt scenario in Kconfig.
Tracked-On: #5390
Signed-off-by: Shuang Zheng <shuang.zheng@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
The commit of da81a0041d
"HV: add e820 ACPI entry for pre-launched VM" introduced a issue that the
base_hpa and remaining_hpa_size are also calculated on the entry of 32bit
PCI hole which from 0x80000000 to 0xffffffff, which is incorrect;
Tracked-On: #5266
Signed-off-by: Victor Sun <victor.sun@intel.com>
Per PCI Firmware Specification Revision 3.0, 4.1.2. MCFG Table Description:
Memory Mapped Enhanced Configuration Space Base Address Allocation Structure
assign the Start Bus Number and the End Bus Number which could decoded by the
Host Bridge. We should not access the PCI device which bus number outside of
the range of [Start Bus Number, End Bus Number).
For ACRN, we should:
1. Don't detect PCI device which bus number outside the range of
[Start Bus Number, End Bus Number) of MCFG ACPI Table.
2. Only trap the ECAM MMIO size: [MMCFG_BASE_ADDRESS, MMCFG_BASE_ADDRESS +
(End Bus Number - Start Bus Number + 1) * 0x100000) for SOS.
Tracked-On: #5233
Signed-off-by: Li Fei1 <fei1.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The old method of build pre-launched VM vacpi by HV source code is deprecated,
so remove related source code;
Tracked-On: #5266
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Previously we use a pre-defined structure as vACPI table for pre-launched
VM, the structure is initialized by HV code. Now change the method to use a
pre-loaded multiboot module instead. The module file will be generated by
acrn-config tool and loaded to GPA 0x7ff00000, a hardcoded RSDP table at
GPA 0x000f2400 will point to the XSDT table which at GPA 0x7ff00080;
Tracked-On: #5266
Signed-off-by: Victor Sun <victor.sun@intel.com>
Signed-off-by: Shuang Zheng <shuang.zheng@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Previously the ACPI table was stored in F segment which might not be big
enough for a customized ACPI table, hence reserve 1MB space in pre-launched
VM e820 table to store the ACPI related data:
0x7ff00000 ~ 0x7ffeffff : ACPI Reclaim memory
0x7fff0000 ~ 0x7fffffff : ACPI NVS memory
Tracked-On: #5266
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Previously the min load_addr for HV image is hard coded to 0x10000000 when
CONFIG_RELOC is enabled, now use CONFIG_HV_RAM_START as its prefer minimum
address like setting of CONFIG_PHYSICAL_START do in Linux kernel.
With this patch, we can offload the CONFIG_HV_RAM_START algorithm to
acrn-config or manually set it in scenario XML on some special boards.
Tracked-On: #5275
Signed-off-by: Victor Sun <victor.sun@intel.com>
When HV pass through the P2SB MMIO device to pre-launched VM, vgpio
device model traps MMIO access to the GPIO registers within P2SB so
that it can expose virtual IOAPIC pins to the VM in accordance with
the programmed mappings between gsi and vgsi.
Tracked-On: #5246
Signed-off-by: Toshiki Nishioka <toshiki.nishioka@intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Add the capability of forwarding specified physical IOAPIC interrupt
lines to pre-launched VMs as virtual IOAPIC interrupts. This is for the
sake of the certain MMIO pass-thru devices on EHL CRB which can support
only INTx interrupts.
Tracked-On: #5245
Signed-off-by: Toshiki Nishioka <toshiki.nishioka@intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
BDF string can be parsed by the configuration tool. A 16bit WORD value with
format (B:8, D:5, F:3) can be passed from configuration to the
hypervisor directly to save some BDF string parse code.
Tracked-On: #4937
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
When trying to passthru a DHRD-ignored PCI device,
iommu_attach_device shall report success. Otherwise,
the assign_vdev_pt_iommu_domain will result in HV panic.
Same for iommu_detach_device case.
Tracked-On: #5240
Signed-off-by: Stanley Chang <stanley.chang@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Add HC_CREATE_VDEV and HC_DESTROY_VDEV two hypercalls that are used to
create and destroy an emulated device(PCI device or legacy device) in hypervisor
v3: 1) change HC_CREATE_DEVICE and HC_DESTROY_DEVICE to HC_CREATE_VDEV
and HC_DESTROY_VDEV
2) refine code style
v4: 1) remove unnecessary parameter
2) add VM state check for HC_CREATE_VDEV and HC_DESTROY hypercalls
Tracked-On: #4853
Reviewed-by: Wang, Yu1 <yu1.wang@intel.com>
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
1.Modify clos_mask and mba_delay as a member of the union type.
2.Move HV_SUPPORTED_MAX_CLOS ,MAX_CACHE_CLOS_NUM_ENTRIES and
MAX_MBA_CLOS_NUM_ENTRIES to misc_cfg.h file.
Tracked-On: #5229
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
HV_SUPPORTED_MAX_CLOS:
This value represents the maximum CLOS that is allowed by ACRN hypervisor.
This value is set to be least common Max CLOS (CPUID.(EAX=0x10,ECX=ResID):EDX[15:0])
among all supported RDT resources in the platform. In other words, it is
min(maximum CLOS of L2, L3 and MBA). This is done in order to have consistent
CLOS allocations between all the RDT resources.
Tracked-On: #5229
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
New board, EHL CRB, does not have legacy port IO UART. Even the PCI UART
are not work due to BIOS's bug workaround(the BARs on LPSS PCI are reset
after BIOS hand over control to OS). For ACRN console usage, expose the
debug UART via ACPI PnP device (access by MMIO) and add support in
hypervisor debug code.
Another special thing is that register width of UART of EHL CRB is
1byte. Introduce reg_width for each struct console_uart.
Tracked-On: #4937
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
-- use an array to fast locate the hypercall handler
to replace switch case.
-- uniform hypercall handler as below:
int32_t (*handler)(sos_vm, target_vm, param1, param2)
Tracked-On: #4958
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
Enhance the help text that accompanies the CONFIG_SCENARIO symbol in Kconfig
Tracked-On: #5203
Signed-off-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
The ivshmem memory regions use the memory of the hypervisor and
they are continuous and page aligned.
this patch is used to initialize each memory region hpa.
v2: 1) if CONFIG_IVSHMEM_SHARED_MEMORY_ENABLED is not defined, the
entire code of ivshmem will not be compiled.
2) change ivshmem shared memory unit from byte to page to avoid
misconfiguration.
3) add ivshmem configuration and vm configuration references
v3: 1) change CONFIG_IVSHMEM_SHARED_MEMORY_ENABLED to CONFIG_IVSHMEM_ENABLED
2) remove the ivshmem configuration sample, offline tool provides default
ivshmem configuration.
3) refine code style.
v4: 1) make ivshmem_base 2M aligned.
Tracked-On: #4853
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Fix the bug for "is_apl_platform" func.
"monitor_cap_buggy" is identical to "is_apl_platform", so remove it.
On apl platform:
1) ACRN doesn't use monitor/mwait instructions
2) ACRN disable GPU IOMMU
Tracked-On:#3675
Signed-off-by: Junming Liu <junming.liu@intel.com>
