Includes header file of non-static function, and declare the
in-file use function static.
Signed-off-by: Yang, Yu-chu <yu-chu.yang@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
In non real mode, for segment registers other than CS, the guest segment
base should be zero, otherwise the guest's segmentation results in wrong
effective addresses.
Linux boots with the wrong segment registers (base address in hidden part),
because it happens that it assigns the segment registers before using any
of them, which effectively reloads the segment base addresses from GDT.
The patch fixes the issue when SOS can't boot using HV release version.
In current code, the assembly code for "sgdt" & "sidt" is not right.
The operand is output, not input.
Also, current code use "rdmsr" instruction to read MSR_IA32_SYSENTER_CS,
which doesn't sepcify the clobbered registers it uses.
This patch uses API msr_read to read MSR_IA32_SYSENTER_CS.
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
With field defined as uint64_t, there are some implicit type conversions when
calling exec_vmwrite/read functions which takes a uint32_t for the first parameter.
This patch fixes it by change field to uint32_t.
v1 - > v2:
- Keep the field as it is and change the defination of field to uint32_t.
Signed-off-by: Kaige Fu <kaige.fu@intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
There are some integer type conversions reported by static
analysis tool for vcpu id, number of created vcpus, and
vpid, to reduce these type conversions, redesign vcpu id,
number of created vcpus, and vpid type as uint16_t as per
their usage, related 16-bit atomic operations shall be
added in HV.
MISRA C requires that all unsigned constants should have the suffix 'U'
(e.g. 0xffU), but the assembler may not accept such C-style constants.
Add 16-bit atomic add/dec/store operations;
Update temporary variables type and parameters type of
related caller;
Update vpid type as uint16_t;
Replace Macro with constant value for CPU_PAGE_SIZE.
Note: According to SDM A.10, there are some bits defined
in the IA32_VMX_EPT_VPID_CAP MSR to support the INVVPID
instruction, these bits don't mean actual VPID, so
the vpid field in the data struct vmx_capability doesn't
be updated.
V1--V2:
update comments for assembly code as per coding style;
Signed-off-by: Xiangyang Wu <xiangyang.wu@intel.com>
To follow the Misra C standard, doing one assignment per line to
make code is clearly readable and reduces the confusion of its
intetion or typo.
Signed-off-by: Yang, Yu-chu <yu-chu.yang@intel.com>
According to C99 standard, -1 integer constant with 'U/UL'
suffix has no type.
To explicit the integer constant:
Update -1U or -1UL as ~0U or ~0UL, or invalid number according
to usage case.
V1-->V2:
Update parameter name and type of send_startup_ipi since
the second parameter is used as pcpu_id;
Update related comments for code clearity.
V2-->V3:
Update comments of struct acrn_irqline;
rename cpu_startup_dest as dest_pcpu_id in the second
parameter of send_startup_ipi.
Tracked-on: ccm0001001-247033
Signed-off-by: Xiangyang Wu <xiangyang.wu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
It will print error information inside memcpy_s if
the parameteter is invalid, the caller can not check
the return value for memcpy_s/strcpy_s/strncpy_s
code like this:
int a(void) {
return 0;
}
int b(void){
a();
}
fix as follow:
int a(void) {
return 0;
}
int b(void){
(void)a();
}
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
There are some cases that we write to VMX_HOST_XXX regs but have debug message
like "pr_dbg("VMX_GUEST_XXX ...")".
Signed-off-by: Kaige Fu <kaige.fu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This patch makes use of IA32_PAT MSR to emulate cache disabled behaviour
When the guest is requesting to set CR0.CD:
- Keep guest's CR0.CD and CR0.NW bits unchanged
- Write IA32_PAT MSR with all-UC entries to change the effective memory
type for all GPA to UC for the guest VCPU
- It depends on trapping wrmsr to IA32_PAT to prevent any entry in
IA32_PAT being changed to non UC type by the guest
When the guest is requesting to clear CR0.CD:
- restore the content of guest's IA32_PAT MSR
Signed-off-by: Zide Chen <zide.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Preparing for emulating guest's CR0.CD and CR0.NW bits:
- Intercept both rdmsr and wrmsr for IA32_PAT
- Track guest's IA32_PAT MSR with vcpu.arch_vcpu.contexts.ia32_pat
Signed-off-by: Zide Chen <zide.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
S3 resume path for VM0 is put bsp of VM0 to real mode and jump
to the wakeup vec of VM0. So we need to extend the init_guest_state
to support start from real mode.
We apply different CS:IP setting for BSP:
- if entry_addr of BSP is larger than 0x100000, it's not wakeup
from S3. We assume it's guest start and set CS:IP by hardcode.
- if entry_addr of BSP is smaller than 0x100000, it's wakeup
from S3. We setup CS:IP according to ACPI spec.
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
MISRA C required function return type should be consistented.
Signed-off-by: Huihuang Shi <huihuang.shi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
In the hypervisor, physical cpu id is defined as "int" or "uint32_t"
type in the hypervisor. So there are some sign conversion issues
about physical cpu id (pcpu_id) reported by static analysis tool.
Sign conversion violates the rules of MISRA C:2012.
In this patch, define physical cpu id as "uint16_t" type for all
modules in the hypervisor and change related codes. The valid
range of pcpu_id is 0~65534, INVALID_PCPU_ID is defined to the
invalid pcpu_id for error detection, BROADCAST_PCPU_ID is
broadcast pcpu_id used to notify all valid pcpu.
The type of pcpu_id in the struct vcpu and vcpu_id is "int" type,
this will be fixed in another patch.
V1-->V2:
* Change the type of pcpu_id from uint32_t to uint16_t;
* Define INVALID_PCPU_ID for error detection;
* Define BROADCAST_PCPU_ID to notify all valid pcpu.
V2-->V3:
* Update comments for INVALID_PCPU_ID and BROADCAST_PCPU_ID;
* Update addtional pcpu_id;
* Convert hexadecimals to unsigned to meet the type of pcpu_id;
* Clean up for MIN_PCPU_ID and MAX_PCPU_ID, they will be
defined by configuration.
Note: fix bug in the init_lapic(), the pcpu_id shall be less than 8,
this is constraint by implement in the init_lapic().
Signed-off-by: Xiangyang Wu <xiangyang.wu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
MISRA C explicit required expression should be boolean when
in branch statements (if,while...).
Signed-off-by: Huihuang Shi <huihuang.shi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This reverts commit 3a3aeac09f.
MTRR has been emulated in hypervisor, then don't need this workaround
patch.
Signed-off-by: Fei Jiang <fei.jiang@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
In current code, on uefi platform, vmcs will be overwritten according to
uefi context, using the exec_vmwrite directly.
This patch use vmx_write_cr<#> interface to init control registers.
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
- Ajust the order of control registers just for more clear in logic.
Will not change the guest init state after the ajustment.
- Add a comment to point out the CR4 should be inited before CR0.
The value of CR4 will be used during CR0 set.
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
To handle cpu down/up dynamically, arcn needs to support vmx off/on
dynamically. Following changes is introduced:
vmx_off will be used when down AP. It does:
- vmclear the mapped vcpu
- off vmx.
exec_vmxon_instr is updated to handle start and up AP both. It does
- if vmx was on on AP, load the vmxon_region saved. Otherwise,
allocate vmxon_region.
- if there is mapped vcpu, vmptrld mapped vcpu.
Signed-off-by: Zheng Gen <gen.zheng@intel.com>
Signed-off-by: Yin Fegnwei <fengwei.yin@intel.com>
Acked-by: Eddie Dong <Eddie.dong@intel.com>
Enable VMX vpid ctrl and assign an unique vpid to each vcpu
so that VMX transitions are not required to invalidate any
linear mappings or combined mappings.
SDM Vol 3 - 28.3.3.3
If EPT is in use, the logical processor associates all mappings
it creates with the value of bits 51:12 of current EPTP.
If a VMM uses different EPTP values for different guests, it may
use the same VPID for those guests. Doing so cannot result in one
guest using translations that pertain to the other.
In our UOS, the trusty world and normal world are using different
EPTP. So we can use the same VPID for it.
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
In current code, sos/uos bsp can only start from 64bit mode.
For sbl platform:
This patch start sos bsp from protected mode by default.
CONFIG_START_VM0_BSP_64BIT is defined to allow start sos bsp
from 64bit mode. If a config CONFIG_START_VM0_BSP_64BIT
defined in config file, then sos bsp will start from 64bit mode.
This patch start uos bsp from real mode, which needs the integration
of virtual bootloader (vsbl).
For uefi platform:
This patch sets sos bsp vcpu mode according to the uefi context.
This patch starts uos bsp from protected mode, because vsbl is not ready
to publish for uefi platform yet. After vsbl is ready, can change to
start uos bsp from real mode.
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Acked-by: Xu, Anthony <anthony.xu@intel.com>
In current implementation, a vcpu can only start from real mode
or 64bit mode.
This patch adds support to start a vcpu from protected mode.
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Acked-by: Xu, Anthony <anthony.xu@intel.com>
In current implemenation, cr0/cr4 host mask value are set
according to the value from fixed0/fixed1 values of cr0/cr4.
In fact, host mask can be set to the bits, which need to be trapped.
This patch, add code to support exiting long mode in CR0 write handling.
Add some check when modify CR0/CR4.
- CR0_PG, CR0_PE, CR0_WP, CR0_NE are trapped for CR0.
PG, PE are trapped to track vcpu mode switch.
WP is trapped for info of protection when paing walk.
NE is always on bit.
- CR4_PSE, CR4_PAE, CR4_VMXE are trapped for CR4.
PSE, PAE are trapped to track paging mode.
VMXE is always on bit.
- Reserved bits and always off bits are not allow to be set by guest.
If guest try to set these bits when vmexit, a #GP will be injected.
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Xu, Anthony <anthony.xu@intel.com>
Guest CR3 read/write operations are not trapped.
Remove CR3 handling in cr_access_vmexit_handler.
Also remove unused API vmx_read_cr3.
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Move from vmexit.c to vmx.c
Declare the functions in vmx.h
Rename the functions' name with prefix vmx_.
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Don't panic system when execute vmxon instruction failed.
And let's follow that only print error info when error return
from library function.
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
According to the comments in hypervisor:
" This file includes config header file "bsp_cfg.h" and other
hypervisor used header files.
It should be included in all the source files."
this patch includes all common header files in hypervisor.h
then removes other redundant inclusions
Signed-off-by: Zide Chen <zide.chen@intel.com>
Now one uint64_t type is used to obtain the corresponding descriptor_table
for GDT/IDT. This will cause the stack protect corruption under -O2.
So the descriptor_table struct is added to configure the GDT/IDT of VMCS.
V1->V2: Move the descriptor_table into vmx.h header file
And its type is renamed from dt_addr_t to descriptor_table.
Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Signed-off-by: Zheng Gen <gen.zheng@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The RFLAGS will be touched in some inline assembly.(exec_vmxon/
RFLAGS_RESTORE). The "cc" constraint should be added. Otherwise
it won't be handled under -O2 option.
And "%%XXX" register should also be added into constraints.
Otherwise it will be optimized incorrectly.
Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Signed-off-by: Zheng Gen <gen.zheng@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
before just AP can run "rdtscp" intruction, if run it on BSP,
it will cause "illegal instruction"; now align BSP & AP.
also remove duplicated code.
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Update X86_FEATURE_OSXSAVE when enabled and replace is_xsave_supported
with cpu_has_cap(X86_FEATURE_OSXSAVE).
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This is workaround patch to resolve Disti performance issue.
In kernel 4.14, PAT is skipped to initialize if MTRR is not enabled,
while graphics driver need set WC to GGTT memory to accelerate memcpy,
if PAT is not initialized, default PAT register will treat UC- as
uncacheable, which will impact gfx performance. Change PAT default
register value to treat UC- as WC to workaroud this problem.
Revert me when PAT/MTRR strong correlation is removed in kernel.
Signed-off-by: Fei Jiang <fei.jiang@intel.com>
Switch all the referenced virtual address to physical address
include ept mapping, vmcs field, vmxon, vmclear, and vmptrld.
Signed-off-by: Zheng, Gen <gen.zheng@intel.com>
Reviewed-by: Chen, Jason Cl <jason.cj.chen@intel.com>
Reviewed-by: Yakui, Zhao <yakui.zhao@intel.com>
Signed-off-by: Zheng, Gen <gen.zheng@intel.com>
Before this patch, guest temporary page tables were generated by hardcode
at compile time, HV will copy this page tables to guest before guest
launch.
This patch creates temporary page tables at runtime for the range of 0~4G,
and create page tables to cover new range(511G~511G+16M) with trusty
requirement.
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
eptp should be record as PA.
this patch changed nworld_eptp, sworld_eptp and m2p eptp to PA type,
necessary HPA2HVA/HVA2HPA transition is used for them after the change.
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
enable TSC offset in VMX, so if TSC MSR is changed by guest OS,
write a caculated value into TSC-offset, then host TSC will not be changed.
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Reviewed-by: He, Min <min.he@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
enable Xsave feature and pass-through it to guests
update based on v2:
- enable host xsave before expose it to guests.
- add validation for the value to be set to 'xcr0' before call xsetbv
when handling xsetbv vmexit.
- tested in SOS guest, created two threads to do different
FP calculations,test code runs in user land of sos.
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Add a global boot_cpu_data to cache common cpu capbility/feature
for detect cpu capbility/feature.
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Acked-by: Xu, Anthony <anthony.xu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
this patch is to detect and enable only APICv features which
are actually supported by the processor, instead fo tuning on
all features by default.
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
