Now Host Bridge and PCI Bridge could only be added to SOS's acrn_vm_pci_dev_config.
So For UOS, we always emualte Host Bridge and PCI Bridge for it and assign PCI device
to it; for SOS, if it's the highest severity VM, we will assign Host Bridge and PCI
Bridge to it directly, otherwise, we will emulate them same as UOS.
Tracked-On: #4550
Signed-off-by: Li Fei1 <fei1.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
in shutdown_vm, it uses guest flags when handling the phyiscal
CPUs whose LAPIC is pass-through. So if it is cleared first,
the related vCPUs and pCPUs can not be switched to correct state.
so move the clear action after the flags used.
Tracked-On: #4848
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
Invalidate cache by scanning and flushing the whole guest memory is
inefficient which might cause long execution time for WBINVD emulation.
A long execution in hypervisor might cause a vCPU stuck phenomenon what
impact Windows Guest booting.
This patch introduce a workaround method that pausing all other vCPUs in
the same VM when do wbinvd emulation.
Tracked-On: #4703
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Refine find_ptirq_entry by hashing instead of walk each of the PTIRQ entries one by one.
Tracked-On: #4550
Signed-off-by: Li Fei1 <fei1.li@intel.com>
Acked-by: Eddie Dong<eddie.dong@Intel.com>
RTVM (with lapic PT) boots hang when maxcpus is
assigned a value less than the CPU number configured
in hypervisor.
In this case, vlapic_state(per VM) is left in TRANSITION
state after BSP boot, which blocks interupts to be injected
to this UOS.
Tracked-On: #4803
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Reviewed-by: Li, Fei <fei1.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
There's no need to look up MSI ptirq entry by virtual SID any more since the MSI
ptirq entry would be removed before the device is assigned to a VM.
Now the logic of MSI interrupt remap could simplify as:
1. Add the MSI interrupt remap first;
2. If step is already done, just do the remap part.
Tracked-On: #4550
Signed-off-by: Li Fei1 <fei1.li@intel.com>
Acked-by: Eddie Dong<eddie.dong@Intel.com>
Reviewed-by: Grandhi, Sainath <sainath.grandhi@intel.com>
For post-launched VMs, the configured CPU affinity could be different
from the actual running CPU affinity. This new field acrn_vm->cpu_affinity
recognizes this difference so that it's possible that CREATE_VM
hypercall won't overwrite the configured CPU afifnity.
Change name cpu_affinity_bitmap in acrn_vm_config to cpu_affinity.
This is read-only in run time, never overwritten by acrn-dm.
Remove vm_config->vcpu_num, which means the number of vCPUs of the
configured CPU affinity. This is not to be confused with the actual
running vCPU number: vm->hw.created_vcpus.
Changed get_vm_bsp_pcpu_id() to get_configured_bsp_pcpu_id() for less
confusion.
Tracked-On: #4616
Signed-off-by: Zide Chen <zide.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
ACRN syncs PIR to vIRR in the software in cases the Posted
Interrupt notification happens while the pCPU is in root mode.
Sync can be achieved by processor hardware by sending a
posted interrupt notiification vector.
This patch sends a self-IPI, if there are interrupts pending in PIR,
which is serviced by the logical processor at the next
VMEnter
Tracked-On: #4777
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
The virtual MSI information could be included in ptirq_remapping_info structrue,
there's no need to pass another input paramater for this puepose. So we could
remove the ptirq_msi_info input.
Tracked-On: #4550
Signed-off-by: Li Fei1 <fei1.li@intel.com>
We look up PTIRQ entru only by SID. So _by_sid could removed.
And refine function name to verb-obj style.
Tracked-On: #4550
Signed-off-by: Li Fei1 <fei1.li@intel.com>
For return value of local_gpa2hpa, either INVALID_HPA or NULL
means the EPT walking failure. Current code only take care of
NULL return and leave INVALID_HPA as correct case.
In some cases (if guest page table is filled with invalid memory
address), it could crash ACRN from guest.
Add INVALID_HPA return check as well.
Also add @pre assumptions for some gpa2hpa usages.
Tracked-On: #4730
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Currently the vcpu_affinity[] array fixes the vCPU to pCPU mapping.
While the new cpu_affinity_bitmap doesn't explicitly sepcify this
mapping, instead, it implicitly assumes that vCPU0 maps to the pCPU
with lowest pCPU ID, vCPU1 maps to the second lowest pCPU ID, and
so on.
This makes it possible for post-launched VM to run vCPUs on a subset of
these pCPUs only, and not all of them.
acrn-dm may launch post-launched VMs with the current approach: indicate
VM UUID and hypervisor launches all VCPUs from the PCPUs that are masked
in cpu_affinity_bitmap.
Also acrn-dm can choose to launch the VM on a subset of PCPUs that is
defined in cpu_affinity_bitmap. In this way, acrn-dm must specify the
subset of PCPUs in the CREATE_VM hypercall.
Additionally, with this change, a guest's vcpu_num can be easily calculated
from cpu_affinity_bitmap, so don't assign vcpu_num in vm_configuration.c.
Tracked-On: #4616
Signed-off-by: Zide Chen <zide.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The current logic puts hpa2 above GPA 4G always, which is incorrect. Need
to set gpa start of hpa2 right after hpa1 when hpa1 size is less then 2G;
Tracked-On: #4458
Signed-off-by: Victor Sun <victor.sun@intel.com>
If CPU has MSR_TEST_CTL, show an emulaued one to VCPU
Tracked-On: #4496
Signed-off-by: Tao Yuhong <yuhong.tao@intel.com>
Reviewed-by: Yan, Like <like.yan@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
remove unnecessary state check and
add pre-condition for vcpu APIs.
Tracked-On: #4320
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
check the vm state in hypercall api,
add pre-condition for vm api.
Tracked-On: #4320
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
now it will call pause_vm in shutdown_vm,
move it out from shutdown_vm to reduce coupling.
Tracked-On: #4320
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
ACRN disables Snoop Control in VT-d DMAR engines for simplifing the
implementation. Also, since the snoop behavior of PCIE transactions
can be controlled by guest drivers, some devices may take the advantage
of the NO_SNOOP_ATTRIBUTE of PCIE transactions for better performance
when snoop is not needed. No matter ACRN enables or disables Snoop
Control, the DMA operations of passthrough devices behave correctly
from guests' point of view.
This patch is used to clean all the snoop related code.
Tracked-On: #4509
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Reviewed-by: Binbin Wu <binbin.wu@intel.com>
Acked-by: Eddie Dong <eddie.dong@Intel.com>
Due to the fact that i915 iommu doesn't support snoop, hence it can't
access memory when the SNOOP bit of Secondary Level page PTE (SL-PTE)
is set, this will cause many undefined issues such as invisible cursor
in WaaG etc.
Current hv design uses EPT as Scondary Leval Page for iommu, and this
patch removes the codes of setting SNOOP bit in both EPT-PTE and SL-PTE
to avoid errors.
And according to SDM 28.2.2, the SNOOP bit (11th bit) will be ignored
by EPT, so it will not affect the CPU address translation.
Tracked-On: #4509
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Reviewed-by: Binbin Wu <binbin.wu@intel.com>
Acked-by: Eddie Dong <eddie.dong@Intel.com>
Waag will send NMIs to all its cores during reboot. But currently,
NMI cannot be injected to vcpu which is in HLT state.
To fix the problem, need to wakeup target vcpu, and inject NMI through
interrupt-window.
Tracked-On: #4620
Signed-off-by: Conghui Chen <conghui.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Align the implementation to SDM Vol.3 4.1.1.
Also this patch fixed a bug that doesn't check paging status first
in some cpu mode.
Tracked-On: #4628
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Currently vlapic_build_id() uses vcpu_id to retrieve the lapic_id
per_cpu variable:
vlapic_id = per_cpu(lapic_id, vcpu->vcpu_id);
SOS vcpu_id may not equal to pcpu_id, and in that case it runs into
problems. For example, if any pre-launched VMs are launched on PCPUs
whose IDs are smaller than any PCPU IDs that are used by SOS.
This patch fixes the issue and simplify the code to create or get
vapic_id by:
- assign vapic_id in create_vlapic(), which now takes pcpu_id as input
argument, and save it in the new field: vlapic->vapic_id, which will
never be changed.
- simplify vlapic_get_apicid() by returning te saved vapid_id directly.
- remove vlapic_build_id().
- vlapic_init() is only called once, merge it into vlapic_create().
Tracked-On: #4268
Signed-off-by: Zide Chen <zide.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Maintain a per-pCPU array of vCPUs (struct acrn_vcpu *vcpu_array[CONFIG_MAX_VM_NUM]),
one VM cannot have multiple vCPUs share one pcpu, so we can utilize this property
and use the containing VM's vm_id as the index to the vCPU array:
In create_vcpu(), we simply do:
per_cpu(vcpu_array, pcpu_id)[vm->vm_id] = vcpu;
In offline_vcpu():
per_cpu(vcpu_array, pcpuid_from_vcpu(vcpu))[vcpu->vm->vm_id] = NULL;
so basically we use the containing VM's vm_id as the index to the vCPU array,
as well as the index of posted interrupt IRQ/vector pair that are assigned
to this vCPU:
0: first vCPU and first posted interrupt IRQs/vector pair
(POSTED_INTR_IRQ/POSTED_INTR_VECTOR)
...
CONFIG_MAX_VM_NUM-1: last vCPU and last posted interrupt IRQs/vector pair
((POSTED_INTR_IRQ + CONFIG_MAX_VM_NUM - 1U)/(POSTED_INTR_VECTOR + CONFIG_MAX_VM_NUM - 1U)
In the posted interrupt handler, it will do the following:
Translate the IRQ into a zero based index of where the vCPU
is located in the vCPU list for current pCPU. Once the
vCPU is found, we wake up the waiting thread and record
this request as ACRN_REQUEST_EVENT
Tracked-On: #4506
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@Intel.com>
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
This is a preparation patch for adding support for VT-d PI
related vCPU scheduling.
ACRN does not support vCPU migration, one vCPU always runs on
the same pCPU, so PI's ndst is never changed after startup.
VCPUs of a VM won’t share same pCPU. So the maximum possible number
of VCPUs that can run on a pCPU is CONFIG_MAX_VM_NUM.
Allocate unique Activation Notification Vectors (ANV) for each vCPU
that belongs to the same pCPU, the ANVs need only be unique within each
pCPU, not across all vCPUs. This reduces # of pre-allocated ANVs for
posted interrupts to CONFIG_MAX_VM_NUM, and enables ACRN to avoid
switching between active and wake-up vector values in the posted
interrupt descriptor on vCPU scheduling state changes.
A total of CONFIG_MAX_VM_NUM consecutive IRQs/vectors are reserved
for posted interrupts use.
The code first initializes vcpu->arch.pid.control.bits.nv dynamically
(will be added in subsequent patch), the other code shall use
vcpu->arch.pid.control.bits.nv instead of the hard-coded notification vectors.
Rename some functions:
apicv_post_intr --> apicv_trigger_pi_anv
posted_intr_notification --> handle_pi_notification
setup_posted_intr_notification --> setup_pi_notification
Tracked-On: #4506
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@Intel.com>
Given the vcpumask, check if the IRQ is single destination
and return the destination vCPU if so, the address of associated PI
descriptor for this vCPU can then be passed to dmar_assign_irte() to
set up the posted interrupt IRTE for this device.
For fixed mode interrupt delivery, all vCPUs listed in vcpumask should
service the interrupt requested. But VT-d PI cannot support multicast/broadcast
IRQs, it only supports single CPU destination. So the number of vCPUs
shall be 1 in order to handle IRQ in posted mode for this device.
Add pid_paddr to struct intr_source. If platform_caps.pi is true and
the IRQ is single-destination, pass the physical address of the destination
vCPU's PID to ptirq_build_physical_msi and dmar_assign_irte
Tracked-On: #4506
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@Intel.com>
Add platform_caps.c to maintain platform related information
Set platform_caps.pi to true if all iommus are posted interrupt capable, false
otherwise
If lapic passthru is not configured and platform_caps.pi is true, the vm
may be able to use posted interrupt for a ptdev, if the ptdev's IRQ is
single-destination
Tracked-On: #4506
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@Intel.com>
EPT table can be changed concurrently by more than one vcpus.
This patch add a lock to protect the add/modify/delete operations
from different vcpus concurrently.
Tracked-On: #4253
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Reviewed-by: Li, Fei1 <fei1.li@intel.com>
The VMCS field is an embedded array for a vCPU. So there's no need to check for
NULL before use.
Tracked-On: #3813
Signed-off-by: Li Fei1 <fei1.li@intel.com>
Conceptually, the devices unregistration sequence of the shutdown process should be
opposite to create.
Tracked-On: #4550
Signed-off-by: Li Fei1 <fei1.li@intel.com>
This commit allows hypervisor to allocate cache to vcpu by assigning different clos
to vcpus of a same VM.
For example, we could allocate different cache to housekeeping core and real-time core
of an RTVM in order to isolate the interference of housekeeping core via cache hierarchy.
Tracked-On: #4566
Signed-off-by: Yan, Like <like.yan@intel.com>
Reviewed-by: Chen, Zide <zide.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
As ACRN prepares to support servers with large amounts of memory
current logic to allocate space for 4K pages of EPT at compile time
will increase the size of .bss section of ACRN binary.
Bootloaders could run into a situation where they cannot
find enough contiguous space to load ACRN binary under 4GB,
which is typically heavily fragmented with E820 types Reserved,
ACPI data, 32-bit PCI hole etc.
This patch does the following
1) Works only for "direct" mode of vboot
2) reserves space for 4K pages of EPT, after boot by parsing
platform E820 table, for all types of VMs.
Size comparison:
w/o patch
Size of DRAM Size of .bss
48 GB 0xe1bbc98 (~226 MB)
128 GB 0x222abc98 (~548 MB)
w/ patch
Size of DRAM Size of .bss
48 GB 0x1991c98 (~26 MB)
128 GB 0x1a81c98 (~28 MB)
Tracked-On: #4563
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
We could use container_of to get vcpu structure pointer from vmtrr. So vcpu
structure pointer is no need in vmtrr structure.
Tracked-On: #4550
Signed-off-by: Li Fei1 <fei1.li@intel.com>
We could use container_of to get vcpu/vm structure pointer from vlapic. So vcpu/vm
structure pointer is no need in vlapic structure.
Tracked-On: #4550
Signed-off-by: Li Fei1 <fei1.li@intel.com>
This function casts a member of a structure out to the containing structure.
So rename to container_of is more readable.
Tracked-On: #4550
Signed-off-by: Li Fei1 <fei1.li@intel.com>
Exend union dmar_ir_entry to support VT-d posted interrupts.
Rename some fields of union dmar_ir_entry:
entry --> value
sw_bits --> avail
Tracked-On: #4506
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@Intel.com>
Pass intr_src and dmar_ir_entry irte as pointers to dmar_assign_irte(),
which fixes the "Attempt to change parameter passed by value" MISRA C violation.
A few coding style fixes
Tracked-On: #4506
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@Intel.com>
For CPU side posted interrupts, it only uses bit 0 (ON) of the PI's 64-bit control
, other bits are don't care. This is not the case for VT-d posted
interrupts, define more bit fields for the PI's 64-bit control.
Use bitmap functions to manipulate the bit fields atomically.
Some MISRA-C violation and coding style fixes
Tracked-On: #4506
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@Intel.com>
The posted interrupt descriptor is more of a vmx/vmcs concept than a vlapic
concept. struct acrn_vcpu_arch stores the vmx/vmcs info, so put struct pi_desc
in struct acrn_vcpu_arch.
Remove the function apicv_get_pir_desc_paddr()
A few coding style/typo fixes
Tracked-On: #4506
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@Intel.com>
Rename struct vlapic_pir_desc to pi_desc
Rename struct member and local variable pir_desc to pid
pir=posted interrupt request, pi=posted interrupt
pid=posted interrupt descriptor
pir is part of pi descriptor, so it is better to use pi instead of pir
struct pi_desc will be moved to vmx.h in subsequent commit.
Tracked-On: #4506
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@Intel.com>
The cupid() can be replaced with cupid_subleaf, which is more clear.
Having both APIs makes reading difficult.
Tracked-On: #4526
Signed-off-by: Li Fei1 <fei1.li@intel.com>
For SOS VM, when the target platform has multiple IO-APICs, there
should be equal number of virtual IO-APICs.
This patch adds support for emulating multiple vIOAPICs per VM.
Tracked-On: #4151
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Acked-by: Eddie Dong <eddie.dong@Intel.com>
As ACRN prepares to support platforms with multiple IO-APICs,
GSI is a better way to represent physical and virtual INTx interrupt
source.
1) This patch replaces usage of "pin" with "gsi" whereever applicable
across the modules.
2) PIC pin to gsi is trickier and needs to consider the usage of
"Interrupt Source Override" structure in ACPI for the corresponding VM.
Tracked-On: #4151
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Acked-by: Eddie Dong <eddie.dong@Intel.com>
Reverts 538ba08c: hv:Add vpin to ptdev entry mapping for vpic/vioapic
ACRN uses an array of size per VM to store ptirq entries against the vIOAPIC pin
and an array of size per VM to store ptirq entries against the vPIC pin.
This is done to speed up "ptirq entry" lookup at runtime for Level triggered
interrupts in API ptirq_intx_ack used on EOI.
This patch switches the lookup API for INTx interrupts to the API,
ptirq_lookup_entry_by_sid
This could add delay to processing EOI for Level triggered interrupts.
Trade-off here is space saved for array/s of size CONFIG_MAX_IOAPIC_LINES with 8 bytes
per data. On a server platform, ACRN needs to emulate multiple vIOAPICs for
SOS VM, same as the number of physical IO-APICs. Thereby ACRN would need around
10 such arrays per VM.
Removes the need of "pic_pin" except for the APIs facing the hypercalls
hcall_set_ptdev_intr_info, hcall_reset_ptdev_intr_info
Tracked-On: #4151
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Acked-by: Eddie Dong <eddie.dong@Intel.com>
There're some cases the SOS (higher severity guest) needs to access the
post-launched VM (lower severity guest) PCI CFG space:
1. The SR-IOV PF needs to reset the VF
2. Some pass through device still need DM to handle some quirk.
In the case a device is assigned to a UOS and is not in a zombie state, the SOS
is able to access, if and only if the SOS has higher severity than the UOS.
Tracked-On: #4371
Signed-off-by: Li Fei1 <fei1.li@intel.com>
