This commit cleans up fiels of struct irq_desc:
- remove name, irq_desc_state, irq_cnt and irq_lost_cnt which are not used.
- remove irq_ prefix of irq_lock field of struct irq_desc;
- change enum irq_state to enum irq_use_state;
Signed-off-by: Yan, Like <like.yan@intel.com>
Reviewed-by: Li, Fei <fei1.li@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
removed some unnecessary variables and functions.
v1-->v2:
Replace div-by-zero with an inline ASM code
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
1)Fix to take into account the size of proc entries in MPtable.
2)Change APIC ids to virtual APIC IDs
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
V1:
In order to better comply with MISRA C,
add const qualifiers whereeven required.
In the patch, these are being added to pointers
which are normally used in "get" functions.
V2: Corrected the issues in the patch
pointed by Junjie in his review comments.
Moved the const qualifiers to the correct
places. Removed some changes which are not
needed.
V3: Updated patch comment.
This modifies a subset of all the functions
which might need constant qualifiers
for the their parameters.
This is not and exhaustive patch. This only
targets obvious places where we can use
the const qualifier. More changes will be
submitted in future patches, if required.
Signed-off-by: Arindam Roy <arindam.roy@intel.com>
vlapic_vmx_vapic_set_tmr is nobody use now, remove it first to avoid
build warning.
Signed-off-by: Yu Wang <yu1.wang@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
ACRN currently do not support SMM and SMI. Print one explicit warning
for it.
Signed-off-by: Yu Wang <yu1.wang@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
From SDM Vol3 Table 10-1 Local APIC Register Address Map. The 0x3F0 is
reserved.
Signed-off-by: Yu Wang <yu1.wang@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Currently, ACRN hasn't expose x2apic capability through cpuid.
And x2apic related code in vlapic.c has no real functionality. This
patch clear related code.
Signed-off-by: Yu Wang <yu1.wang@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
In interrupt-window exiting handler, disable it directly even there has
pending interrupts. The later acrn_handle_pending_request will
re-evaluation and re-enable it if needed.
Signed-off-by: Yu Wang <yu1.wang@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
This patch adds code to support read-only RTC support for guests
run by partition mode ACRN. It supports RW for CMOS address port 0x70
and RO for CMOS data port 0x71. Reads to CMOS RAM offsets are fetched
by reading CMOS h/w directly and writes to CMOS offsets are discarded.
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
-- Change these APIs to void type, add pre-conditions,
and move parameter-check to upper-layer functions.
handle_vpic_irqline
vpic_set_irqstate
vpic_assert_irq
vpic_deassert_irq
vpic_pulse_irq
vpic_get_irq_trigger
handle_vioapic_irqline
vioapic_assert_irq
vioapic_deassert_irq
vioapic_pulse_irq
-- Remove dead code
vpic_set_irq_trigger
v1-->v2:
add cleanup vpic
change some APIs to void type, add pre-conditions,
and move the parameter-check to upper-layer functions.
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
after updated cpu context get/set method, the vcpu_dumreg cmd is not
correct anymore as the registers may read from VMCS but meantime hv
shell may not be running on target vcpu.
this patch take use of smp_call_function for vcpu dumpreg and make the
dump always come from correct vcpu.
v2:
- use str pointer to get vcpu_dumpreg context instead of print out directly
in notify handler.
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
take use of VCPU_NOTIFY vector, add smp_call_function support.
added a per_cpu field smp_call_info, and make each smp_call_function
is not re-entered, and the caller CPU is returned when all the target
CPUs complete the call.
v4:
- remove global lock
- take use of wait_sync_change function to do the sequence sync
v3:
- remove per_cpu lock in smp_call_info
- use a global lock to ensure smp_call_function sequence
- use pcpu_sync_sleep to wait IPI complete
v2:
- after new smp function come, if old one exist, changed from overwirte
with the new one to ignore the new one.
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
pcpu_sync_sleep monitor "uint64_t sync" change to "1UL << mask_bit",
which is not very clear to take use of it.
change it to wait_sync_change, means monitor "uint64_t sync" change to
"wake_sync", make the function clear to use.
And expose it for the usage of the following patches.
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Now the DM has adopted the new VHM request state transitions and
REQ_STATE_FAILED is obsolete since neither VHM nor kernel mediators will set the
state to FAILED.
This patch drops the definition to REQ_STATE_FAILED in the hypervisor, makes
''processed'' unsigned to make the compiler happy about typing and simplifies
error handling in the following ways.
* (dm_)emulate_(pio|mmio)_post no longer returns an error code, by introducing a
constraint that these functions must be called after an I/O request
completes (which is the case in the current design) and assuming
handlers/VHM/DM will always give a value for reads (typically all 1's if the
requested address is invalid).
* emulate_io() now returns a positive value IOREQ_PENDING to indicate that the
request is sent to VHM. This mitigates a potential race between
dm_emulate_pio() and pio_instr_vmexit_handler() which can cause
emulate_pio_post() being called twice for the same request.
* Remove the ''processed'' member in io_request. Previously this mirrors the
state of the VHM request which terminates at either COMPLETE or FAILED. After
the FAILED state is removed, the terminal state will always be constantly
COMPLETE. Thus the mirrored ''processed'' member is no longer useful.
Note that emulate_instruction() will always succeed after a reshuffle, and this
patch takes that assumption in advance. This does not hurt as that returned
value is not currently handled.
This patch makes it explicit that I/O emulation is not expected to fail. One
issue remains, though, which occurs when a non-aligned cross-boundary access
happens. Currently the hypervisor, VHM and DM adopts different policy:
* Hypervisor: inject #GP if it detects that the access crossed boundary
* VHM: deliver to DM if the access does not complete falls in the range of a
client
* DM: a handler covering part of the to-be-accessed region is picked and
assertion failure can be triggered.
A high-level design covering all these components (in addition to instruction
emulation) is needed for this. Thus this patch does not yet cover the issue.
Tracked-On: #875
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
MISARC has requirements about Marco redefinition, usage of ++ or -- and
assignment operator in boolean expression. This patch is used to solve
these violations.
The modifications are summarized as following:
1.The HC_VM_SET_MEMORY_REGION, HC_VM_GPA2HPA, HC_VM_SET_MEMORY_REGIONS are
redefined twice in acrn_hv_des.h, so delete them to solve the macro
redefinition violations.
2.The macro BUS_LOCK are redefined in bits.h and atomic.h, then delete
the declaration in both two files, add a new declaration in cpu.h and
include the header file.
3.modify the code to solve the improper usage of -- operators in string.c.
4.modify the while loop to for loop to avoid assignment operator in
boolean expression in vlapic.c.
v1 -> v2:
*Modify the format of commit logs and signed-off name.
*Modify the code format from 'd = d-1;' to 'd--;' to be better.
Signed-off-by: Junjun Shan <junjun.shan@intel.com>
Thare some debug specific code which don't run on release version, such as vmexit_time,
vmexit_cnt, sbuf related codes, etc...
This patch encloses the codes with #ifdef HV_DEBUG.
Signed-off-by: Kaige Fu <kaige.fu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This commit cleans up the irq APIs which are a bit confusing.
- pri_register_handler(), normal_register_handler() and
common_register_handler() into request_irq(), and removed
the unnecessary struct irq_request_info;
- rename the unregister_common_handler() to free_irq();
After the revision, the common irq APIs becomes:
- int32_t request_irq(uint32_t irq,
irq_action_t action_fn,
void *action_data,
const char *name)
- void free_irq(uint32_t irq)
Signed-off-by: Yan, Like <like.yan@intel.com>
Reviewed-by: Li, Fei1 <fei1.li@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Since vector is x86 specific concept, we'd like to hide it from common irq APIs.
This commit
- adds static irq:vector mappings for special interrupt such as timer
and cpu notification;
- reserves the irq and vector at initialization;
- removed the vector argument in pri_register_handler(), get reserved vector
from irq_desc in common_register_handler().
Signed-off-by: Yan, Like <like.yan@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Since we don't support shared irq, dev_handler_node which works as action node,
is not needed anymore.
This commit removes the dev_handler_node struct and does some relevant changes,
including:
- moves necessary fields to struct irq_desc: action, priv_data, name; and
removes unused handler_data;
- changes return type of pri_/normal_register_handler() from dev_handler_node*
to int32_t, which is irq num (>= 0) on success, and errno (> 0) on failure.
- changes unregister_irq_handler() to take argument unint32_t instead of
dev_handler_node*;
- changes are made to the places where these APIs are called.
Signed-off-by: Yan, Like <like.yan@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
Because multiple physical devices sharing a single physical pin would be
assigned to a same VM, so UOS could handle the irq sharing. So that we could
remove the physical irq sharing support in HV.
This commit removes the irq sharing support, changes including:
- removed the dev_list field in irq_desc, and clean up codes for the list
operation;
- replace IRQ_ASSIGNED_SHARED and IRQ_ASSIGNED_NOSHARE with IRQ_ASSIGNED;
- remove argument indicating irq is shared;
- revise irq request flow for pt devices to remove dependency on irq sharing:
register irq on adding remapping entery and unregister irq on removal an
entry, and do not register/unregister at remapping an entry.
Signed-off-by: Yan, Like <like.yan@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
MISRA-C requires that shift operation cannot exceed the word length.
What this patch does:
- Add the pre condition for 'init_lapic' regarding to 'pcpu_id'
Currently, max 8 physical cpus are supported.
Re-design will be required if we would like to support more physical
cpus.
So, add the pre condition here to avoid the unintentional shift
operation mistakes.
- Replace the id type with uint8_t in 'vlapic_build_id'
- For VM0, it uses 'lapic_id' as its id, which is uint8_t.
- For non VM0, it uses 'vcpu_id' as its id, which is uint16_t.
Cast this id to uint8_t to make sure there is no loss of data after
left shifting 24U.
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Add two files to do compile time assert.
One is arch specific, and put in hypervisor/arch/x86/.
The other one is common, and put in hypervisor/common/.
If the statement is not true, there will be error during compile time.
The file will not increase the size of HV binary.
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Move the definitions of offset of fields in boot_ctx to the same header
file that the struct boot_ctx is in, to reduce the possibility that some
modification would make the offset inconsistant with the fields within
the structure.
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Sometimes the CPUID(0x15) still returns the zero tsc frequency. In such case
the base frequency of cpuid(0x16) is used as tsc frequency.
Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The CPUID with 0x16 leaf can report the CPU hz and it is faster. And this
mechanism is widely used in Linux kernel.(native_calibrate_cpu).
As this is not supported on APL, currently sos adds the cpu_khz callback
in pv_cpu_ops to read the cpu frequency. This is quite hack.
(In fact HV leverages the cpuid with 0x40000010 leaf).
If it is emulated, the sos and guest os can use the cpuid to obtain the
corresponding cpu_khz. Then the cpu_khz in pv_cpu_ops can be removed.
V2: Simple the logic of adding unsupported cpuid level entry after the
CPUID 0x16 is emulated. Initialize the vcpuid_entry explicitly with zero
for the unsupported cpuid.
Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
In order to add the emulation of CPUID 0x16, it is expected that it is
handled when the CPUID 0x15 is supported. Otherwise we will have to emulate
other CPUID leaf, which makes it complex.
At the same time as Acrn HV has the requirements on the CPUs, it is restricted
that the CPUID should support the leaf >=0x15.
Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
- clear run context when reset vcpu;
- destroy trusty without erase trusty memory when reset vm;
changelog:
v1 -> v2: fix misra violation on calling memset();
Signed-off-by: Sun Victor <victor.sun@intel.com>
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Reviewed-by: Chi Mingqiang <mingqiang.chi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
- 'reboot.c' defines 'warm_reboot()' only, and this
function is deprecated.
- remove the eXecution attribute of 'mttr.h'
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The bracket is required when the level of precedence of
the operators is less than 13. Add the bracket to logical
conjunctions. The commit applys the rule to the files under
Signed-off-by: Yang, Yu-chu <yu-chu.yang@intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
The bracket is required when the level of precedence of
the operators is less than 13. Add the bracket to logical
conjunctions. The commit applys the rule to the files under
hypervisor/arch/x86/guest/*
Signed-off-by: Yang, Yu-chu <yu-chu.yang@intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
to avoid send IPI to self, also improve the related code:
1. get_cpu_id is uint16_t now
2. MISRA-C requirement. like add {}
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Current EPT check runs after EPT enabling in init_exec_ctrl. This
patch fixes wrong order.
Signed-off-by: Edwin Zhai <edwin.zhai@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
ACRN in partition mode emulates UART for the VMs directly launced
from HV. This patch adds an option to enable/disable vUART for a
VM.
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
For Partition mode ACRN, kernel load address and Boot args load address
are hardcoded. Boot args are currently passed from vm description for
each VM. Renamed init_vm0_boot_info to init_vm_boot_info.
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Use func(void) rather than func() for the function declaration and
definition based on MISRAC requirement.
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
MISRAC requires that a switch statement shall contain a default clause.
This patch add the default clause and some comments for the ones
violated the rule.
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
There is no SOS and device model in strict partition mode. ACRN emulates IO for
virtual devices. Any access to IO not backed by HV should return all FFs on read
and writes should be discarded.
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
ACRN boots multiple OS in partitioning mode. This patch adds code to assign
vm_id in the vm data structure to be same as the one assigned at compile time.
This makes the vm id deterministic for each VM booted from HV directly.
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
ACRN in partition mode does not have vector and APIC ID remapping for
device interrupts. Only MSIs are supported. No IOAPIC and legacy interrupts
for the VMs in ACRN partition mode.
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
This patch is an extension to the commit 6643adff8b.
It uses the mptable API to build mptable for each VM booted by ACRN in partition mode.
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Adding code to map memory for UOS in partitioning mode ACRN.
HPA starting above 4GB is used for UOS memory. Supports only contiguous memory
from host for UOS. Current implementation supports only 2 GB for UOS memory.
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
It's not necessary to specify priority for dynamic allocated vector, because
nested irq is not supported on HV, and irq of any priority would cause VM exit.
This commit makes the following changes:
- remove the argument indicating priority in struct irq_request_info and
following functions:
ptdev_activate_entry()
find_available_vector()
irq_desc_alloc_vector()
normal_register_handler()
- change the macro of vector ranges:
VECTOR_DYNAMIC_START/END for dynamically allocable vectors;
VECTOR_FIXED_START/END for fixed allocated vectors, such as vector for
timer etc.
Signed-off-by: Yan, Like <like.yan@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
-- add clear trusty memory flag
In some cases such as UOS power off or UOS full reset,
need to clear trusty memory,no need to clear memory such as
UOS S3 or UOS system reset,then add a flag to distinguish it
when destroy secure world.
-- Restore trusty memory to guest normal world.
-- Moved free trusty EPT inside destroy_secure_world
In some cases such as UOS S3 or UOS system reset,
only need to free trusty EPT, this patch move free
trusty EPT inside destroy_secure_world.
Because PD/PT are shared in both secure world's EPT
and normal world's EPT,before freeing trusty EPT,
it will memset all PDPTEs except trusty memory,
then call 'free_ept_mem', it can only free trusty EPT,
and does't affect shared normal world EPT.
v2-->v3:
-- Used new mmu api ept_mr_add when restore trusty memory
to SOS and normal world
-- Dropped this patch "Removed reverted page tables for trusty memory"
because map_mem will be removed in future
It will have a patch, need to update this api(ept_mr_add),
it will not create inverted page tables for trusty memory.
v1-->v2:
-- free trusty ept
still use free_ept_mem, not add a new api,but need to
memset pdptes except trusty memory
-- Removed reverted page tables for trusty memory.
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
MISRAC does not allow the use of an inline function with external
linkage.
What this patch does:
- Add the static keyword for the function that is only used in the
definition file.
- Remove the inline keyword for the function that is used in multiple
files.
v1 -> v2:
* Move some functions to headers as static inline function if it is
possible
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
Declare a variable with the static qualifier if it is of file scope and
not used in another file.
v1 -> v2:
* remove the unnecessary change to the following variables, which is
due to the report issue
struct multiboot_info *mbi = (struct multiboot_info *)
(HPA2HVA((uint64_t)boot_regs[1]));
struct multiboot_mmap *mmap =
(struct multiboot_mmap *)
HPA2HVA((uint64_t)mbi->mi_mmap_addr);
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
V4:
- Clear address cache info after a full cf8/cfc access
- Add NULL pointer checking when calling init/deinit ops
V3:
- Do not use ASSERT
- Loop through the vdev list defined in vm_desctiption table to call the vdev init/unit functions
- Make the cached vbdf info struct per vm instead of per pcpu
V2:
- Fixed MISRA violations
Reviewed-by: Anthony Xu <anthony.xu@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
If SOS start from 64bit mode, it will use the page table
created by bootloader or BIOS. HV doesn't need to create
page table for it.
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
In current code, VM0 BSP start mode is hardcoded, in this patch VM0 BSP
start mode is decided by the boot context prepared by bootloader/BIOS.
In current code, VM0 BSP VMCS is override only on UEFI platform.
In this patch, VM0 BSP VMCS is override on both SBL & UEFI platforms.
Also restructure the code of guest init code.
In this patch, a vcpu run_context is initilaized first according to vcpu mode.
Then write the value to vmcs according to run_context value.
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
save_segment/load_segment is common code and can be used outside of trusty,
move to a header file.
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The structures defined in acrn_efi.h is x86 related, move it
to acrh/x86/guest/.
Also, the headfile will be used on both SBL & UEFI platforms,
rename it to vm0_boot.h
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Add code to save boot context, which is prepare by the bootloader or
BIOS, the context can be used to init sos vmcs, such as GDT, IDT,
segment selectors, control registers, ia32_efer. In this way, HV can
leverage the data structures built by bootloader or BIOS, without
creating them in HV.
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
New field in VM's structure:
sworld_snapshot: save cpu_context of secure world.
New hypercall: HC_SAVE_RESTORE_SWORLD_CTX
In UOS S3 suspend path: trusty kernel driver will call this hypercall
to require Hypervisor save context of secure world.
In UOS S3 resume path: virtual firmware will call this hypercall to
require Hypervisor restore context of secure world.
New bit in secure_world_control.flag:
ctx_saved: indicate whether cpu_context of secure world is saved.
Signed-off-by: Qi Yadong <yadong.qi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Define Bitmap flag to indicate secure world's state:
supported: 0(not supported), 1(supported)
active: 0(inactive), 1(active)
Refine secure_world_memory:
base_gpa_in_sos: base_gpa from SOS's view
base_gpa_in_uos: base_gpa from UOS's view, this is the original base_gpa
allocated by bootloader.
Recording above GPA is for usage of trusty EPT destroy and re-create.
There is an assumption: the secure world's memory address is contiguous
in both SOS and physical side.
Signed-off-by: Qi Yadong <yadong.qi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
ACRN in partitioning mode boots multiple OS. Adding code to parse
VM description structure and a reference description structure for
booting 2 OSes.
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
It's not reasonable to use push/pop against mmio. So we remove
the push/pop emulation.
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
We inject invalid opcode if instruction decode fails.
We don't support many instruction. If new type guest hit
the invalid opcode and it's necessary to emulate that
instruction, we could add new instruction then.
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
TO inject the
- Invalid Opcode exception
- Stack Fault exception
- Alignment Check exception
to guest.
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
The DPL from SS access right field is always correct according
to SDM. We use it instead of using CS selector.
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
When doing copy_to/from_gva, it's possible the guest no page
happens on none-first page. In this case, we need get correct
fault address from gva2gpa.
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Acked-by: Eddie Dong <Eddie.dong@intel.com>
This patch add some comments after the default and before the break
in the switch statement based on MISRA-C requirement.
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
Added prepare_vm function as a wrapper function on top of prepare_vm0.
This makes adding support for partition mode ACRN to boot multiple
VMs from HV cleaner.
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
add wrap function cpu_do_idle in default_idle to handle arch cpu specific
idle operation.
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
vm_update_register calls vm_get/set_register to update register and vm_update_rflags
calls vm_update_register to update RFLAGS.
We have make vm_get/set_register as non-failed function in previous patch.
So, this patch make the vm_update_register/rflags as void.
Signed-off-by: Kaige Fu <kaige.fu@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
vie_read/write_bytereg call vm_get/set_register to get/set byteregs.
We have make vm_get/set_register as non-failed function in previous patch.
So, this patch make the vie_read/write_bytereg as non-failed function too.
Signed-off-by: Kaige Fu <kaige.fu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Originally, vm_set/get_register return -EINVAL when "vcpu == NULL" or reg is invalid.
But, we don't check the return value actually and there is no chance we get an
null-vcpu and invalid reg in current implementation.
This patch add pre-assumptions about valid parameters before the function and make
them as non-failed functions.
- static uint64_t vm_get_register(struct vcpu *vcpu, enum cpu_reg_name reg)
- static void vm_set_register(struct vcpu *vcpu, enum cpu_reg_name reg, uint64_t val)
Signed-off-by: Kaige Fu <kaige.fu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Originally, vm_get_seg_desc return -EINVAL when "vcpu == NULL" or seg is invalid.
But, we don't check the return value actually and there is no chance we get an
null-vcpu and invalid seg in current implementation.
This patch adds pre-assumptions and makes the function as void.
Signed-off-by: Kaige Fu <kaige.fu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This patch just removes some dead codes related to Instruction Emulation.
Signed-off-by: Kaige Fu <kaige.fu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Originally, there is cross-references between instr_emul.h and instr_emul_wrapper.h.
User must include both of them when calling instruction emulation functions. This
will raise up some confusion and inconvenience.
So we rearrange the logic of instruction emulation code as following:
- External API -- defined in instr_emul.h
* decode_instruction(struct vcpu *vcpu)
* emulate_instruction(struct vcpu *vcpu)
- Make all other functions as static in instr_emul.c
- Remove instr_emul_wrapper.c/h
No functional change.
Signed-off-by: Kaige Fu <kaige.fu@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
ASSERT is too strict for HV when error happens during emulating instruction.
This patch remove all ASSERT and return a negative error code when failing to
emulate instruction.
Originally, getcc will return -EINVAL when opsize are not one of (1, 2, 4, 8).
But theoretically, opsize in current implementation can only be one of (1, 2, 4, 8).
So, we will always get valid "cc".
This patch add a pre-assumption and make sure that getcc always return valid value.
For the current code, #GP will be injected to guest if something goes wrong with
instruction emulation.
Signed-off-by: Kaige Fu <kaige.fu@intel.com>
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
There are so many __unused prefix spaning the emulate_xxx functions. This patch
unify the parameters of emulate_xxx to avoid it.
- All emulate_xxx functions are defined as emulate_xxx(struct vcpu *vcpu, instr_emul_vie *vie)
or emulate_xxx(struct vcpu *vcpu, instr_emul_vie *vie, struct vm_guest_paging *paging).
- Move mmio_read/write to instr_emul.c and call them directly.
Signed-off-by: Kaige Fu <kaige.fu@intel.com>
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
The formal solution has merged,revert this patch.
This reverts commit a9d04cc5ce.
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
move most of fields from run_context into ext_context for world switch.
these fields do not need doing runtime save/restore during vm exit/entry.
v3:
- update cr0/cr4 registers switch method
v2:
- use struct name ext_context instead of saved_context
- updated according to previous v2 patch
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
there will be 3 types of vcpu runtime contexts:
- runtime contexts always saved/restored during VM exit/entry, which
include general registers rax/rcx/rdx/rbx/rbp/rsi/rdi/r8~r15, cr2 and
msr for spectre control (ia32_spec_ctrl)
- runtime contexts on-demand cached/updated during VM exit/entry, which
include frequently used registers rsp, rip, efer, rflags, cr0 and cr4
- runtime contexts always read/write from/to VMCS, which include left
registers not in above
this patch add get/set register APIs for vcpu runtime contexts, and unified
the save/restore method for them according to above description.
v3:
- update vcpu_get/set_cr0/4 as unified interface to get/set guest cr0/cr4,
use on-demand cache for reading, but always write to VMCS for writing.
v2:
- use reg_cached/reg_updated for on-demand runtime contexts
- always read/write cr3 from/to VMCS
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
There are potential value outside range of underlying type
in some assignment expressions. This violates Rule 10.3 or
Rule 10.4 of MISRA C:2012.
BTW, all operations shall be conducted in exactly the same
arithmetic (underlying) type, otherwise, there is a
value outside range violation.
Update related assignment expressions.
V1-->V2:
* Fix potential overflow in "pit_calibrate_tsc";
* Move PTDEV_INVALID_PIN definition before
get_entry_info since this MACRO is only used by
debug function.
Signed-off-by: Xiangyang Wu <xiangyang.wu@linux.intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
Since global vector table is being used on all pcpus, it's not necessary to request timer irq
at each cpu init. With this change, per_cpu timer nodes are removed, and only BSP registers
and unregisters timer irq.
Signed-off-by: Yan, Like <like.yan@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Fix the parameter name mismatch between API declaration and definition.
v2 -> v3:
* Fix two more violations which are missed in previous report.
shell_puts and console_write
v1 -> v2:
* Replace 'ret_desc' with 'desc'
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
Two improvements:
Firstly, disable EOI VMEXIT for all vectors by default. Only the level
sensitive irq need to set it due to need emulate send EOI to vioapic to
clear Remote IRR bit.
Secondly, to clear RVI(Requesting virtual interrupt) and SVI(Servicing
virtual interrupt) bits.
Signed-off-by: Yu Wang <yu1.wang@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
In some special scenarios, the LAPIC somehow hasn't send EOI to IOAPIC
which cause the Remote IRR bit can't be clear. To clear it, some OSes
will use EOI Register to clear it for 0x20 version IOAPIC, otherwise
use switch Trigger Mode to Edge Sensitive to clear it.
This patch emulate this IOAPIC behavior to satisfy this requirement.
Signed-off-by: Yu Wang <yu1.wang@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
The IOAPIC specification defined EOI register for 0x20 version. The
original vioapic code implemented this register but the version was
still export as 0x11.
Tried to set 0x20, the Linux kernel has't access this EOI register,
still rely on lapic to send eoi.
From Linux ioapic driver comments, it says that only send EOI via EOI
register when met IOAPIC hardware bug.
This patch removes all 0x20 IOAPIC code to reduce the code size.
Signed-off-by: Yu Wang <yu1.wang@intel.com>
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
To make vioapic simpler, avoid lots of code to convert variable type
between uint8_t and uint32_t.
This patch changes all variable type of pin related variables to
uint32_t instead of original uint_8.
Signed-off-by: Yu Wang <yu1.wang@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
During ioapic reset, some registers need to be set to the default value
which defined in ioapic spec.
So far, the vioapic function only be called by ioapic itself in
ioapic_init. And just invoked after calloc the vioapic object, so all
the content are already set to zero. But this vioapic_reset function be
exported as one API which maybe invoked by other scenarios in future.
So this patch resolves this potential issue.
Signed-off-by: Yu Wang <yu1.wang@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
The APIC ID field should be bit 24:27 in IOAPIC Identification register.
The bits 28:31 are reserved bits which need to be avoid touched.
Signed-off-by: Yu Wang <yu1.wang@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
For level sensitive trigger mode, the vioapic should not deliver extra
interrupt to vlapic if the previous one hasn't received EOI.
Signed-off-by: Yu Wang <yu1.wang@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Merge multiple if to switch-case. And set 0xFFFFFFFFU as the default
value of undefined address.
And the IOREGSEL register only bits 7:0 are defined, so mask the other
bits for read operation.
Signed-off-by: Yu Wang <yu1.wang@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
1, Remove vioapic_mmio_read/vioapic_mmio_write, and combine them to
vioapic_mmio_rw.
2, The vioapic_read/write are used for emulate the ioapic indirect
access logic. So change their name with vioapic_indirect as the prefix.
Signed-off-by: Yu Wang <yu1.wang@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Remove structure vm_attr
Wrap two APIs alloc_vm_id and free_vm_id
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
'hv_main()' wraps several logic which has no dependencies
each other(enable VMX, prepare to create service os VM..),
in this case, split this function to make code logic clear.
remove 'is_vm0_bsp()' & 'hv_main()'
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
one/two_byte_opcodes is indexed by op_byte. So vie_op->op_byte is unnecessary.
This patch remove it and add a new variable opcode to instr_emul_vie.
Signed-off-by: Kaige Fu <kaige.fu@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
There are size2mask array to convert addsize to corresponding mask and function
vie_size2mask doing the same thing except validation check of addrsize.
Theoretically, addrsize can only be one of (1, 2, 4, 8). So, the check of addrsize
is unnecessary.
This patch remove vie_size2mask and use size2maks directly.
Signed-off-by: Kaige Fu <kaige.fu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
We have vm_set/get_register here. There is no need to wrap the function with
vie_read_register.
This patch remove it.
Signed-off-by: Kaige Fu <kaige.fu@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
In order to comply with MISRA C rules, renamed vairables
and function names starting with "_".
The major changes invloves mostly static function
names, as they are being called inside the same file
by a wrapper function.
Signed-off-by: Arindam Roy <arindam.roy@intel.com>
MISRAC requires that the array size should be declared explicitly.
This patch fixes the issues caused by the arrays that are defined in
link_ram.ld.in or assembly file.
v1 -> v2:
* Update the solution based on the info from the following link.
https://sourceware.org/binutils/docs/ld/Source-Code-Reference.html
Fix pattern is like below:
extern char start_of_ROM, end_of_ROM, start_of_FLASH;
memcpy (& start_of_FLASH, & start_of_ROM, & end_of_ROM - &
start_of_ROM);
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Reshuffle VMX init code, and check both allowed 0-settings and
1-settings of related MSR to make the final VMCS control value.
Signed-off-by: Edwin Zhai <edwin.zhai@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Change this API to void type
Add pre-condition, state the input parameters are not NULL.
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
- print error message for command parameter error
when callback/handler is called.
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
And export the API to DM. DM will do system reboot/S3 resume based
on this API.
Also add the pre-assumption description for some vm APIs.
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
1. We could explicitly use specific register to avoid one more
register allocated.
2. If we explicitly assign register, it's not neccessary to
add the register in clobber list according to gcc mannual.
3. For vmptrld, we add memory to clobber list also.
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Reviewed-by: Edwin Zhai <edwin.zhai@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
In the C99 standard, the order of evaluation associated with
multiple #, multiple ## or a mix of # and ## preprocessor
operator is unspecified. For this case, gcc 7.3.0 manual
does not specify related implementation. So it is unsafe
to use multiple # or ## in a macro.
BTW, there are some macros with one or more "##" which are
not used by hypervisor.
Update relate codes to avoid using multiple # or ## in a macro;
Remove unused macros with one or more "##";
Remove "struct __hack;" at the end of GETCC since it is useless.
Note:
'##' operator usage constraints: A ## preprocessing token shall
not occur at the beginning or at the end of a replacement list
for either form of macro definition.
V1--V2:
Update relate codes to avoid using multiple # or ## in a macro.
V2-->V3:
Remove unused macros with one or more "##";
Remove "struct __hack;" at the end of GETCC since it is useless.
Signed-off-by: Xiangyang Wu <xiangyang.wu@linux.intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
Adding Kconfig option to choose and compile partitioning mode for ACRN.
Current implementation does not allow ACRN to support sharing mode
and partitioning mode out of a single binary.
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Fix integer related violations.
V1->V2:
clean all memset/calloc integer violations excpet bsp/boot directory
Signed-off-by: Huihuang Shi <huihuang.shi@intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Fix the parameter type mismatch between API declaration and definition.
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Currently we don't support resume VM in HC API, the real meaning
of the code is to start VM.
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
1. add register_softirq to register a softirq handler
2. rename exec_softirq to do_softirq; raise_softirq to fire_softirq.
3. in do_softirq call registered softirq handler not call
the device softirq handle function directly
4. enable irq after vm exit and disable irq after the first
call do_softirq before vm enter.
5. call do_softirq again when irq disabled to handle the risk
unhandled softirq.
6. rename SOFTIRQ_DEV_ASSIGN to SOFTIRQ_PTDEV
7. remove SOFTIRQ_ATOMIC
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Softirq is not x86 architectural related.
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
According to SDM, inject #GP(0) if guest tries to write reserved
bit of CR8.
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Now, we let guest own most CR4 bit. Which means guest
handles whether the CR4 writting is invalid or not and
GP injection if it's invalid writing.
Two bits are exception here:
we filter VMX and PCID feature to guest (which means
they are supported on native).
So we can't depends on guest to inject GP for these bits.
Instead, we should explicitly trap these CR4 bits update
and inject GP to guest from HV.
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
According to SDM:
writing a nonzero value to 63:32 bits of CR0 and CR4 results #GP(0).
writing a nonzero value to reserved bit of CR4 results #GP(0).
We merge the check with always off mask of CR0 and CR4.
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Move the check to delicated function and do the check as early
as possible.
Add more check and inject GP to guest if check fails according to
SDM.
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Reviewed-by: Anthony Xu <anthony.xu@intel.com>
For data structure types "enum vpic_wire_mode, struct stack_canary",
its name is identical with variable name in the same scope.
This MISRA C violation is detected by static analysis tool.
For variables "segment_override, pde_index", its name is identical
with function name. This MISRA C violation is detected.
Naming convention rule:Variable name can be shortened from
its data structure type name.
The following udpates are made:
enum vpic_wire_mode vpic_wire_mode-->enum vpic_wire_mode wire_mode
struct stack_canary stack_canary-->struct stack_canary stk_canary
uint8_t segment_override:1 --> uint8_t seg_override:1
uint32_t pde_index--> uint32_t pde_idx
V1-->V2:
Remove update "enum cpu_state cpu_state-->enum cpu_state state"
and "enum irqstate irqstate-->enum irq_ops_mode ops_mode", other
patch will cover it.
V2-->V3:
Update "uint32_t pde_index--> uint32_t pde_idx".
Signed-off-by: Xiangyang Wu <xiangyang.wu@linux.intel.com>
For some function pointer type, its name is identical with
variable name in the same scope. This MISRA C violation is
detected.
Naming convention rule:If the type is function
pointer, its name needs suffix "_fn".
The following udpates are made:
*apicv_set_intr_ready-->*apicv_set_intr_ready_fn
*apicv_pending_intr-->*apicv_pending_intr_fn
*apicv_set_tmr-->*apicv_set_tmr_fn
*apicv_batch_set_tmr-->*apicv_batch_set_tmr_fn
*apicv_intr_accepted-->*apicv_intr_accepted_fn
*apicv_post_intr-->*apicv_post_intr_fn
*enable_x2apic_mode-->*enable_x2apic_mode_fn
V1-->V2:
Update function pointer when it is used as calling
since no need to dereference a function pointer
before calling.
Signed-off-by: Xiangyang Wu <xiangyang.wu@linux.intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
For data structure types "struct pic and struct iommu_domain",
its name is identical with variable name in the same scope.
This MISRA C violation is detected.
Naming convention rule:If the data structure type is used by only one
module and its name meaning is simplistic, its name needs prefix
shorten module name.
Naming convention rule:Variable name can be shortened from its
data structure type name.
The following udpates are made:
struct pic pic-->struct i8259_reg_state i8259
struct iommu_domain iommu_domain-->struct iommu_domain iommu
V1-->V2:
Update "struct iommu_domain iommu_domain-->struct iommu_domain iommu"
Signed-off-by: Xiangyang Wu <xiangyang.wu@linux.intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
Instead of using two members for maintaining the state of a VHM request, this
patch replaces the transitions with a single state. Basically the lifecycle of a
VHM request shall be:
FREE -> PENDING -> PROCESSING -> COMPLETE -> FREE -> ...
The structure header of vhm_request has more details of the transitions access
limitations under different states.
Also drop the set but unused member vcpu.ioreq_pending.
For backward-compatibility, the obsolete 'valid' member is still kept and
maintained before SOS and DM adapts to the new state transitions.
v2 -> v3:
* Use complete_ioreq to mark an I/O request finished in
dm_emulate_(pio|mmio)_post.
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
There are some functions for the post work of I/O emulation. This patch moves
these functions to io.c for clarity. No functional change introduced.
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Currently no post-work is done for I/O requests of type PCICFG or WP. The
impacts include:
1. ''valid'' in VHM request buffers are left as 1 even after the I/O request
completes. This violates the pre-condition of acrn_insert_request_wait()
but does not cause failures since a new I/O request can never happen
before the previous one completes.
2. Values read from PCI configuration spaces are never passed to UOS.
This patch adds the post-work for these two kinds of I/O requests. The post-work
for port I/O is invoked for PCICFG since it is essentially a port I/O and the
request structure is compatible. No post-work is needed for WP as it is only
triggered for EPT violations on writes, while post-work is mainly for reads.
v2 -> v3:
* Consistently use 0/1 (not false/true) for the ''valid'' member.
* Add comments to suggest when the hypervisor can see REQ_PCICFG and why
dm_emulate_pio_post also works in such cases.
* Rename: mark_ioreq_done -> complete_ioreq
* Rename: complete_request -> emulate_io_post
* Rename: hcall_notify_req_finish -> hcall_notify_ioreq_finish
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
This patch solely moves MMIO handler registration APIs from ept.c to io.c as it
is related more to I/O request handling.
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This is the counterpart to the PIO emulation side.
1. ept_violation_vmexit_handler (entry point for handling vmexit on EPT instruction):
Extract mmio address, size, direction and value (for write only), fill in an
I/O request, invoke do_io to handle that and emulate_pio_post for
post-processing.
2. emulate_io
Handle the given I/O request, either completed by registered MMIO handlers
or sent to VHM.
3. emulate_mmio_post:
Update guest registers after the emulation is done.
v2 -> v3:
* Rename: emulate_mmio_by_handler -> hv_emulate_mmio.
* Inline the original hv_emulate_mmio.
* No longer check alignment. The handlers are responsible for handling
unaligned accesses.
v1 -> v2:
* Rename: do_io -> emulate_io.
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This patch refactors how I/O instructions are emulated, in order for a unify the
I/O emulation path. The major control flow includes:
1. pio_instr_vmexit_handler (entry point for handling vmexit on I/O instruction):
Extract port address, register size, direction and value (for write only),
fill in an I/O request (of type io_request), invokes do_io to handle that
and update the guest registers if the request has been successfully handled
when do_io returns.
2. emulate_io:
Handle the given I/O request. The request is handled or sent to VHM if it
returns 0 (the actual status can be found in io_req->processed). On errors a
negative error code is returned.
3. emulate_pio_by_handler:
Look for the PIO handler for the given request and invoke that
handler. Return 0 if a proper handler is found and invoked (the status of
the emulation can be found in io_req->processed), -EIO when the request
spans across devices, and -ENODEV when no handler is found.
4. emulate_pio_post:
Update guest registers after the emulation is done. Currently this can
happen either right after do_io() or after the vcpu is resumed. Status check
on the I/O request and follow-up actions on failure will also go here.
Note:
Currently do_io can return 0 with io_req->processed being REQ_STATE_PENDING if
the request is sent to VHM for further processing. In this case the current vcpu
will be paused after handling this vm_exit, and dm_emulate_pio_post will be
invoked to do the rest after this vcpu is resumed. When vcpus are scheduled back
to exactly where they are scheduled out later, do_io should be responsible for
the post_work and the processing of do_io results shall be mostly the same.
v2 -> v3:
* Rename: emulate_pio_by_handler -> hv_emulate_pio.
* Properly mask the value passed to port I/O handler.
v1 -> v2:
* Rename: do_io -> emulate_io.
* Rename io_instr_vmexit_handler -> pio_instr_vmexit_handler to reflect the
fact that it handles port I/O only.
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The current hierarchy :
CONSOLE --> SERIAL -->UART DRIVER
This patch remove SERIAL layer, that is console will
call UART driver directly, change it to:
CONSOLE --> UART DRIVER
Remove some related data structures and registration and callback.
Cleanup vuart.c
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
For data structure types "struct key_info, struct pir_desc,
struct map_params", its name is identical with variable name
in the same scope. This MISRA C violation is detected by
static analysis tool.
Naming convention rule:If the data structure type is used by only one
module and its name meaning is simplistic, its name needs prefix
shorten module name.
The following udpates are made:
struct key_info-->struct trusty_key_info
struct pir_desc-->struct vlapic_pir_desc
struct map_params-->struct mem_map_params
Signed-off-by: Xiangyang Wu <xiangyang.wu@linux.intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
For data struct type struct vie, emul_ctxt, its name
is identical with variable name in the same scope.
This MISRA C violation is detected by static analysis
tool.
According to naming convention rule: If the data structure
type is used by only one module and its name meaning is
simplistic, its name needs prefix shorten module name.
Follow the same rule, data structure name "vie_op" needs
to be renamed;
The following updates are made in this patch:
struct vie-->struct instr_emul_vie
struct vie_op-->struct instr_emul_vie_op
struct emul_ctxt-->struct instr_emul_ctxt
Signed-off-by: Xiangyang Wu <xiangyang.wu@linux.intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The variable timer's name is identical with struct
timer s name. This MISRA C violation is detected
by static analysis tool.
According to naming convention rule: If the data
structure type is used by multi modules, its
corresponding logic resource is only used by
hypervisor/host and isn't exposed to external
components (such as SOS, UOS), its name meaning
is simplistic (such as timer), its name needs prefix
"hv_".
Rename struct timer as struct hv_timer.
Replace regular expression:s/struct timer\([ ),;\t\*]\+\)
/struct hv_timer\1
Signed-off-by: Xiangyang Wu <xiangyang.wu@linux.intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
V1:
In order to remove MISRA C violations for rule
219S, rename functions, macros whose name
starts with "_".
Also removed some __mmio functions because they are
duplicates and are not used anywhere.
Renamed functions like __assert, to asm_assert,
because they were only wrappers around asm calls.
V2:
Over and above the changes on V1, modified bitmap
functions names to lock (corresponding to unlock)
introduced in V1
Signed-off-by: Arindam Roy <arindam.roy@intel.com>
Misra c required parameter should not changed in the scope
of function,use local variable to replace it.
Signed-off-by: Huihuang Shi <huihuang.shi@intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
The variable vlapic_timer's name is identical with struct
vlapic_timer's name. This MISRA C violation is detected
by static analysis tool.
Rename variable vlapic_timer as vtimer.
Replace regular expression: s/vlapic_timer\([ ;,.)\-]\+\)/vtimer\1
Signed-off-by: Xiangyang Wu <xiangyang.wu@linux.intel.com>
Parameter's type which is pointer should not be changed in the
scope of function,assign it's value to local variable to fixed
it out.
Signed-off-by: Huihuang Shi <huihuang.shi@intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
There are many naming violations detected by static analysis
tool. Data structure type name is the same as variable name.
According to naming convention rules, If the data structure
type is used by multi modules and its name meaning is
simplistic (such as vcpu, vm), its name needs prefix "acrn_".
Rename struct vpic as struct acrn_vpic.
Replace regular expression:s/struct vpic\([ ),;\t\*]\+\)/struct acrn_vpic\1
Signed-off-by: Xiangyang Wu <xiangyang.wu@linux.intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
There are many naming violations detected by static analysis
tool. Data structure type name is the same as variable name.
According to naming convention rules, If the data structure
type is used by multi modules and its name meaning is
simplistic (such as vcpu, vm), its name needs prefix "acrn_".
Rename struct vlapic as struct acrn_vlapic
Replace regular expression:s/struct vlapic\([ ),;\t\*]\+\)/struct acrn_vlapic\1
Signed-off-by: Xiangyang Wu <xiangyang.wu@linux.intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The current struct vcpu has two members, namely 'struct vhm_request req' and
'struct mem_io mmio', that hold similar info, including the address, direction, size,
value and status of mmio reqeusts.
As a step towards a unified framework for both MMIO/PIO, this patch unifies
these two members by a tailored version of vhm_reqeust, mostly with the reserved
fields dropped. The definitions to request types, directions and process status
are reused.
Handling errors during emulations will be revisited after the I/O emulation
paths are unified. Thus for this patch the mmio.mmio_status in inherited by
io_req.processed which is not yet properly processed.
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
hypervisor will crash if user try to call hypercall
HC_CREATE_VM in infinite style.
actually, the number of VMs hypervisor can support
depends on the bit width of 'vmid_bitmap'.should
return error in case of overflow.
other cleanup for this function to avoid memory leak
in case of failure.
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
