This is a WA to fix the invisible cursor issue. The TT_PASSTHROUGH
mode will not use iommu to do the address translation.
Tracked-On: #4509
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
To avoid information leakage, we need to ensure that the device is
inaccessble when it does not exist.
For SR-IOV disabled VF device, we have the following operations.
1. The configuration space accessing will get 0xFFFFFFFF as a
return value after set the device state to zombie.
2. The BAR MMIO EPT mapping are removed, the accesssing causes
EPT violation.
3. The device will be detached from IOMMU.
4. The IRQ pin and vector are released.
Tracked-On: #4433
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
As pci_devices.h is included by <page.h>, need to prepare pci_devices.h
for nuc6cayh and apl-up2 board.
Also the #error info in generic/pci_devices.h should be removed, otherwise
the build will be failed in sdc/sdc2/industry scenarios.
Tracked-On: #4458
Signed-off-by: Victor Sun <victor.sun@intel.com>
For a pre-launched VM, a region from PTDEV_HI_MMIO_START is used to store
64bit vBARs of PT devices which address is high than 4G. The region should
be located after all user memory space and be coverd by guest EPT address.
Tracked-On: #4458
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
ve820.c is a common file in arch/x86/guest/ now, so move function of
create_sos_vm_e820() to this file to make code structure clear;
Tracked-On: #4458
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Remove useless per board ve820.c as arch/x86/guest/ve820.c is common for
all boards now;
Tracked-On: #4458
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
hypervisor/arch/x86/configs/$(BOARD)/ve820.c is used to store pre-launched
VM specific e820 entries according to memory configuration of customer.
It should be a scenario based configurations but we had to put it in per
board foler because of different board memory settings. This brings concerns
to customer on configuration orgnization.
Currently the file provides same e820 layout for all pre-launched VMs, but
they should have different e820 when their memory are configured differently.
Although we have acrn-config tool to generate ve802.c automatically, it
is not friendly to modify hardcoded ve820 layout manually, so the patch
changes the entries initialization method by calculating each entry item
in C code.
Tracked-On: #4458
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Currently ept_pages_info[] is initialized with first element only that force
VM of id 0 using SOS EPT pages. This is incorrect for logical partition and
hybrid scenario. Considering SOS_RAM_SIZE and UOS_RAM_SIZE are configured
separately, we should use different ept pages accordingly.
So, the PRE_VM_NUM/SOS_VM_NUM and MAX_POST_VM_NUM macros are introduced to
resolve this issue. The macros would be generated by acrn-config tool when
user configure ACRN for their specific scenario.
One more thing, that when UOS_RAM_SIZE is less then 2GB, the EPT address
range should be (4G + PLATFORM_HI_MMIO_SIZE).
Tracked-On: #4458
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
change vmsi_read_cfg to read_vmsi_cfg, same applies to writing
change vmsix_read_cfg to read_vmsix_cfg, same applies to writing
Tracked-On: #4433
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Move CFG read/write function for PCI-compatible Configuration Mechanism from
debug/uartuart16550.c to hw/pci.c and rename CFG read/write function for
PCI-compatible Configuration Mechanism to pci_pio_read/write_cfg to align with
CFG read/write function pci_mmcfg_read/write_cfg for PCI Express Enhanced
Configuration Access Mechanism.
Tracked-On: #4371
Signed-off-by: Li Fei1 <fei1.li@intel.com>
In order to add GVT-D support, we need pass through stolen memory and opregion memroy
to the post-launched VM. To implement this, we first reserve the GPA for stolen memory
and opregion memory through post-launched VM e820 table. Then we would build EPT mapping
between the GPA and the stolen memory and opregion memory real HPA. The last, we need to
return the GPA to post-launched VM if it wants to read the stolen memory and opregion
memory address and prevent post-launched VM to write the stolen memory and opregion memory
address register for now.
We do the GPA reserve and GPA to HPA EPT mapping in ACRN-DM and the stolen memory and
opregion memory CFG space register access emulation in ACRN-HV.
Tracked-On: #4371
Signed-off-by: Li Fei1 <fei1.li@intel.com>
Hypervisor uses 2MB large page, and if either CONFIG_HV_RAM_START or
CONFIG_HV_RAM_SIZE is not aligned to 2MB, ACRN won't boot. Add static check
to avoid unexpected boot failures.
If CONFIG_RELOC is enabled, CONFIG_HV_RAM_START is not directly referred
by the code, but it causes problems because ld_text_end could be relocated
to an address that is not 2MB aligned which fails mmu_modify_or_del().
Tracked-On: #4441
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
Signed-off-by: Zide Chen <zide.chen@intel.com>
VM needs to check if it owns this device before deiniting it.
Tracked-On: #4433
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Change enable_vf/disable_vf to create_vfs/disable_vfs
Change base member of pci_vbar to base_gpa
Tracked-On: #4433
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The vf_bdf is not initialized when invoking pci_pdev_read_cfg function.
Tracked-On: #4433
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
We didn't support SR-IOV capability of PF in UOS for now, we should
hide the SR-IOV capability if we pass through the PF to a UOS.
For now, we don't support assignment of PF to a UOS.
Tracked-On: #4433
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@Intel.com>
Emulate Device ID, Vendor ID and MSE(Memory Space Enable) bit in
configuration space for an assigned VF, initialize assgined VF Bars.
The Device ID comes from PF's SRIOV capability
The Vendor ID comes from PF's Vendor ID
The PCI MSE bit always be set when VM reads from an assigned VF.
Tracked-On: #4433
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
If a VF instance is disabled, we didn’t remove the vdev instance,
only set the vdev as a zombie vdev instance, indicating that it
cannot be accessed anymore.
Tracked-On: #4433
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Change name find_vdev to find_available_vdev and add comments
Tracked-On: #4433
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The VF BARs are initialized by its PF SRIOV capability
Tracked-On: #4433
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Refine coding style to wrap msix map/unmap operations, clean up repeated
assignments for msix mmio_hpa and mmio_size.
Tracked-On: #4433
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Add _v prefix for some function name to indicate this function wants to operate
on virtual CFG space or virtual BAR register.
Tracked-On: #4371
Signed-off-by: Li Fei1 <fei1.li@intel.com>
Since there is no RTVM requirement for sdc2 scenario, replace uuid
495ae2e5-2603-4d64-af76-d4bc5a8ec0e5 which is dedicated to RTVM with
615db82a-e189-4b4f-8dbb-d321343e4ab3
Tracked-On: #4472
Signed-off-by: fuzhongl <fuzhong.liu@intel.com>
Reviewed-by: Sun Victor <victor.sun@intel.com>
Removed the pci_vdev_write_cfg_u8/u16/u32 APIs and only used
pci_vdev_write_cfg as the API for writing vdev's cfgdata
Tracked-On: #4433
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
In Commit 127c73c3, we remove the strict check for adding page table mapping. However,
we just replace the ASSERT of pr_fatal in add_pte. This is not enough. We still add
the virtual address by 4K if the page table mapping is exist and check the virtual
address is over the virtual address region for this mapping. Otherwise, The complain
will continue for 512 times at most.
Tracked-On: #3475
Signed-off-by: Li Fei1 <fei1.li@intel.com>
Add cfg_header_read_cfg and cfg_header_write_cfg to handle the 1st 64B
CFG Space header PCI configuration space.
Only Command and Status Registers are pass through;
Only Command and Status Registers and Base Address Registers are writable.
In order to implement this, we add two type bit mask for per 4B register:
pass through mask and read-only mask. When pass through bit mask is set, this
means this bit of this 4B register is pass through, otherwise, it is virtualized;
When read-only mask is set, this means this bit of this 4B register is read-only,
otherwise, it's writable. We should write it to physical CFG space or virtual
CFG space base on whether the pass through bit mask is set or not.
Tracked-On: #4371
Signed-off-by: Li Fei1 <fei1.li@intel.com>
1. Renames DEFINE_IOAPIC_SID with DEFINE_INTX_SID as the virtual source can
be IOAPIC or PIC
2. Rename the src member of source_id.intx_id to ctlr to indicate interrupt
controller
2. Changes the type of src member of source_id.intx_id from uint32_t to
enum with INTX_CTLR_IOAPIC and INTX_CTLR_PIC
Tracked-On: #4447
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
for vpci_bridge it is better just write the virtual configure space,
so move out the PCI bridge phyiscal cfg write to pci.c
also add some rules in config pci bridge.
Tracked-On: #3381
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
For SRIOV needs ARI support, so enable it in HV if
the PCI bridge support it.
TODO:
need check all the PCI devices under this bridge can support ARI,
if not, it is better not enable it as PCIe spec. That check will be
done when scanning PCI devices.
Tracked-On: #3381
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
- remove limit of CONFIG_HV_RAM_SIZE which is for scenario of 2 VMs only,
the default size from Kconfig could build scenario which up to 5 VMs;
- rename whl-ipc-i5_acpi_info.h to platform_acpi_info.h, since the former
one should be generated by acrn-config tool;
- add SOS related macros in misc.h, otherwise build scenarios which has
SOS VM would be failed;
Tracked-On: #4463
Signed-off-by: Victor Sun <victor.sun@intel.com>
- remove .data and .text directives. We want to place all the boot data and
text in the .entry section since the boot code is different from others
in terms of relocation fixup. With this change, the page tables are in
entry section now and it's aligned at 4KB.
- regardless CONFIG_MULTIBOOT2 is set or not, the 64-bit entry offset is
fixed at 0x1200:
0x00 -- 0x10: Multiboot1 header
0x10 -- 0x88: Multiboot2 header if CONFIG_MULTIBOOT2 is set
0x1000: start of entry section: cpu_primary_start_32
0x1200: cpu_primary_start_64 (thanks to the '.org 0x200' directive)
GDT tables
initial page tables
etc.
Tracked-On: #4441
Reviewed-by: Fengwei Yin <fengwei.yin@intel.com>
Signed-off-by: Zide Chen <zide.chen@intel.com>
This is to enable relocation for code32.
- RIP relative addressing is available in x86-64 only so we manually add
relocation delta to the target symbols to fixup code32.
- both code32 and code64 need to load GDT hence both need to fixup GDT
pointer. This patch declares separate GDT pointer cpu_primary64_gdt_ptr
for code64 to avoid double fixup.
- manually fixup cpu_primary64_gdt_ptr in code64, but not rely on relocate()
to do that. Otherwise it's very confusing that symbols from same file could
be fixed up externally by relocate() or self-relocated.
- to make it clear, define a new symbol ld_entry_end representing the end of
the boot code that needs manually fixup, and use this symbol in relocate()
to filter out all symbols belong to the entry sections.
Tracked-On: #4441
Reviewed-by: Fengwei Yin <fengwei.yin@intel.com>
Signed-off-by: Zide Chen <zide.chen@intel.com>
GRUB multiboot2 doesn't support relocation for ELF, which means it can't
load acrn.32.out to other address other than the one specified in ELF
header. Thus we need to use the raw binary file acrn.bin, and add
address/entry address/relocatable tags to instruct multiboot2 loader
how to load the raw binary.
Tracked-On: #4441
Reviewed-by: Fengwei Yin <fengwei.yin@intel.com>
Signed-off-by: Zide Chen <zide.chen@intel.com>
In direct boot mode, boot_context[] which is saved from cpu_primary_save_32()
is no longer used since commit 6beb34c3cb ("vm_load: update init gdt
preparation"). Thus, the call to it and the function itself can be removed.
Tracked-On: #4441
Reviewed-by: Fengwei Yin <fengwei.yin@intel.com>
Signed-off-by: Zide Chen <zide.chen@intel.com>
reduce the use of similar APIs (particularly the name confusion) for
CFG space read/write.
Tracked-On: #4433
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Make the name of the functions more accurate
Tracked-On: #4433
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Add some pre-assumption and safety check for PCIe ECAM:
1) ACRN only support platforms with PCIe ECAM to access PCIe device CFG space;
2) Must not use ECAM to access PCIe device CFG space before
pci_switch_to_mmio_cfg_ops was called. (In release version, ACRN didn't support
IO port Mechanism. ECAM is the only way to access the PCIe device CFG space).
Tracked-On: #4371
Signed-off-by: Li Fei1 <fei1.li@intel.com>
One argument is missing for the function ptirq_alloc_entry.
This patch fixes the doc generation error.
Tracked-On: #3882
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
- change variable name from hpa to hva because in this function we are
dealing with hva, not hpa.
- can get the address of ld_text_end by directly referring to this symbol,
because relative addressing yields the correct hva, not the hva before
relocation.
Tracked-On: #4441
Signed-off-by: Zide Chen <zide.chen@intel.com>
The pci_read_cap and pci_read_ext_cap are used to enumerate PCI
legacy capability and extended capability.
Change the name pci_read_cap to pci_enumerate_cap
Change the name pci_read_ext_cap to pci_enumerate_ext_cap
Tracked-On: #4433
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Fixed misspellings and rst formatting issues.
Added ptdev.h to the list of include file for doxygen
Tracked-On: #3882
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Add doxygen style comments to ptdev public APIs.
Add these API descriptions to group acrn_passthrough.
Tracked-On: #3882
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
This patch updates board.c files for RDT MBA on existing
platforms. Also, fixes setting RDT flag in WHL config file.
Tracked-On: #3725
Signed-off-by: Vijay Dhanraj <vijay.dhanraj@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This patch adds RDT MBA support to detect, configure and
and setup MBA throttle registers based on VM configuration.
Tracked-On: #3725
Signed-off-by: Vijay Dhanraj <vijay.dhanraj@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
create new pdev and vdev structures for a SRIOV VF device initialization
Tracked-On: #4433
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Add a new parameter pf_vdev for function vpci_init_vdev to support SRIOV
VF vdev initializaiton.
Tracked-On: #4433
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The init_one_dev_config is used to initialize a acrn_vm_pci_dev_config
SRIOV needs a explicit acrn_vm_pci_dev_config to create a VF vdev,so
refine it to return acrn_vm_pci_dev_config.
Tracked-On: #4433
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Due to SRIOV VF physical device needs to be initialized when
VF_ENABLE is set and a SRIOV VF physical device initialization
is same with standard PCIe physical device, so expose the
init_pdev for SRIOV VF physical device initialization.
Tracked-On: #4433
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
All SRIOV VF physical devices don't have bars in configuration space,
they are from the VF associated PF's VF_BAR registers of SRIOV capability.
Adding a vbars data structure in pci_cap_sriov data structure to store
SRIOV VF_BAR information, so that each VF bars can be initialized directly
through the vbars instead multiple accessing of the PF VF_BAR registers.
Tracked-On: #4433
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
To support SRIOV capability initialization, add a new parameter
is_sriov_pf_vdev for init_vdev_pt function.
If parameter is_sriov_pf_vdev of function init_vdev_pt is true,
then function init_vdev_pt initializes the vdev's SRIOV capability.
Tracked-On: #4433
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Current code avoid the rule 88 S in MISRA-C, so move xsaves and xrstors
assembler to individual functions.
Tracked-On: #4436
Signed-off-by: Conghui Chen <conghui.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
VF_ENABLE is one field of SRIOV capability that is used to create
or remove VF physical devices. If VF_ENABLE is set, hv can detect
if the VF physical devices are ready after waiting 100 ms.
v2: Add sanity check for writing NumVFs register, add precondition
and application constraints when VF_ENABLE is set and refine
code style.
Tracked-On: #4433
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Introduce SRIOV capability field for pci_vdev and add SRIOV capability
interception entries.
Tracked-On: #4433
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Make the SRIOV-Capable device invisible from SOS if there is
no room for its all virtual functions.
v2: fix a issue that if a PF has been dropped, the subsequent PF
will be dropped too even there is room for its VFs.
Tracked-On: #4433
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
if the device has PCIe capability, walks all PCIe extended
capabilities for SRIOV discovery.
v2: avoid type casting and refine naming.
Tracked-On: #4433
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
It puts the new line in the wrong place, and the logs are confusing.
For example, for these entries:
mmap[0] - type: 1, base: 0x00000, length: 0x9800
mmap[1] - type: 2, base: 0x98000, length: 0x8000
mmap[2] - type: 3, base: 0xc0000, length: 0x4000
Currently it prints them in this way:
mmap table: 0 type: 0x1
Base: 0x0000000000000000 length: 0x0000000000098000
mmap table: 1 type: 0x2
Base: 0x0000000000098000 length: 0x0000000000008000
mmap table: 2 type: 0x3
Base: 0x00000000000c0000 length: 0x0000000000040000
With this fix, it looks like the following, and now it's of same style
with how prepare_sos_vm_memmap() logs ve820 tables.
mmap table: 0 type: 0x1
Base: 0x0000000000000000 length: 0x0000000000098000
mmap table: 1 type: 0x2
Base: 0x0000000000098000 length: 0x0000000000008000
mmap table: 2 type: 0x3
Base: 0x00000000000c0000 length: 0x0000000000040000
Tracked-On: #1842
Signed-off-by: Zide Chen <zide.chen@intel.com>
add vpci bridge operations in hypervisor, to avoid SOS mis-operations
to affect other VM's PCI devices.
assumption: before hypervisor bootup, the physical pci-bridge shall be
configured correctly by BIOS or other bootloader; for ACS (Access
Control Service) capability, it is configured by BIOS to support the
devices under it to be isolated and allocated to different VMs.
to simplify the emulations of vpci bridge, set limitations as following:
1. expose all configure space registers, but readonly
2. BIST not support; by default is 0
3. not support interrupt, including INTx and MSI.
TODO:
1. configure tool can select whether a PCI bridge is emulated or pass
through.
Open:
1. SOS how to reset PCI device under the PCI bridge?
Tracked-On: #3381
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Acked-by: Eddie Dong <eddie.dong@Intel.com>
The init value for XCR0 and XSS should be the same with spec:
In SDM Vol1 13.3:
XCR0[0] is associated with x87 state (see Section 13.5.1). XCR0[0] is
always 1. The other bits in XCR0 are all 0 coming out of RESET.
The IA32_XSS MSR (with MSR index DA0H) is zero coming out of RESET.
The previous code try to fix the xsave area leak to other VMs during init
phase, but bring the error to linux. Besides, it cannot avoid the
possible leak in running phase. Need find a better solution.
Tracked-On: #4430
Signed-off-by: Conghui Chen <conghui.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The dedicated DMAR unit for Intel integrated GPU
shall be available on the physical platform.
So remove the assert and add application constraint
in handle_one_drhd func.
Tracked-On: #4405
Signed-off-by: Junming Liu <junming.liu@intel.com>
Reviewed-by: Wu Binbin <binbin.wu@intel.com>
Reviewed-by: Wu Xiangyang <xiangyang.wu@linux.intel.com>
is not set
This patch does the following,
1. Removes RDT code if CONFIG_RDT_ENABLED flag is
not set.
2. Set the CONFIG_RDT_ENABLED flag only on platforms
that support RDT so that build scripts will automatically
reflect the config.
Tracked-On: #3715
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Signed-off-by: Vijay Dhanraj <vijay.dhanraj@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
cache configuration.
This patch creates a generic infrastructure for
RDT resources instead of just L2 or L3 cache. This
patch also fixes L3 CAT config overwrite by L2 in
cases where both L2 and L3 CAT are supported.
Tracked-On: #3715
Signed-off-by: Vijay Dhanraj <vijay.dhanraj@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
There can be times when user unknowinlgy enables
CONFIG_CAT_ENBALED SW flag, but the hardware might
not support L3 or L2 CAT. In such case software can
end up writing to the CAT MSRs which can cause
undefined results. The patch fixes the issue by
enabling CAT only when both HW as well software
via the CONFIG_CAT_ENABLED supports CAT.
The patch also address typo with "clos2prq_msr"
function name. It should be "clos2pqr_msr" instead.
PQR stands for platform qos register.
Tracked-On: #3715
Signed-off-by: Vijay Dhanraj <vijay.dhanraj@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Upcoming intel platforms can support both L2 and L3
but our current code only supports either L2 or L3 CAT.
So split the MSRs so that we can support allocation
for both L2 and L3.
This patch does the following,
1. splits programming of L2 and L3 cache resource
based on the resource ID.
2. Replace generic platform_clos_array struct with resource
specific struct in all the existing board.c files.
Tracked-On: #3715
Signed-off-by: Vijay Dhanraj <vijay.dhanraj@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
As part of rdt cat refactoring, goal is to combine all rdt
specific features such as CAT under one module. So renaming
rdt resouce specific files such as cat.c/.h to generic rdt.c/.h
files.
Tracked-On: #3715
Signed-off-by: Vijay Dhanraj <vijay.dhanraj@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Per Section 4.4 Speculation Barriers, in
"Retpoline: A Branch Target Inject Mitigation" white paper,
"LFENCE instruction limits the speculative execution that
a processor implementation can perform around the LFENCE,
possibly impacting processor performance,but also creating
a tool with which to mitigate speculative-execution
side-channel attacks."
Tracked-On: #4424
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Initialize efi info of acrn mbi when boot from multiboot2 protocol, with
this patch hypervisor could get host efi info and pass it to Linux zeropage,
then make guest Linux possible to boot with efi environment;
Tracked-On: #4419
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Initialize module info and ACPI rsdp info of acrn mbi when boot from
multiboot2 protocol, with this patch SOS VM could be loaded sucessfully
with correct ACPI RSDP;
Tracked-On: #4419
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Initialize mmap info of acrn mbi when boot from multiboot2 protocol,
with this patch acrn hv could boot from multiboot2;
Tracked-On: #4419
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Add multiboot2 header info in HV image so that bootloader could
recognize it.
Tracked-On: #4419
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Initialize and sanitize a acrn specific multiboot info struct with current
supported multiboot1 in very early boot stage, which would bring below
benifits:
- don't need to do hpa2hva convention every time when refering boot_regs;
- panic early if failed to sanitize multiboot info, so that don't need to
check multiboot info pointer/flags and panic in later boot process;
- keep most code unchanged when introduce multiboot2 support in future;
Tracked-On: #4419
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The patch re-arch boot component header files by:
- moving multiboot.h from include/arch/x86/ to boot/include/ and keep
this header for multiboot1 protocol data struct only;
- moving multiboot related MACROs in cpu_primary.S to multiboot.h;
- creating an independent boot.h to store acrn specific boot information
for other files' reference;
Tracked-On: #4419
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
- It is meaningless to enable debug function in parse_hv_cmdline() because
the function run in very eary stage and uart has not been initialized at
that time, so remove this debug level definition;
- Rewrite parse_hv_cmdline() function to make it compliant with MISRA-C;
- Decouple uart16550 stuff from Init.c module and let console.c handle it;
Tracked-On: #4419
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
We hit build issue if the ld version is 2.34:
error: PHDR segment not covered by LOAD segment
One issue was created to binutils bugzilla system:
https://sourceware.org/bugzilla/show_bug.cgi?id=25585
From the ld guys comment, this is not an issue of 2.34. It's an
issue fixing of the old ld. He suggested to add option
--no-dynamic-linker
to ld if we don't depend on dynamically linker to loader our binary.
Tracked-On: #4415
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Count down number will be decreased at each tick, when it comes to zero,
it will trigger reschedule.
Tracked-On: #4410
Signed-off-by: Conghui Chen <conghui.chen@intel.com>
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
pick_next function will update the virtual time parameters, and return
the vcpu thread with earlest evt. Calculate the count down number for
the picked vcpu thread, it means how many mcu a thread can run before
the next reschedule occur.
Tracked-On: #4410
Signed-off-by: Conghui Chen <conghui.chen@intel.com>
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
In the wakeup handler, the vcpu_thread object will be inserted into the
runqueue, and in the sleep handler, it will be removed from the queue.
vcpu_thread object is ordered by EVT (effective virtual time).
Tracked-On: #4410
Signed-off-by: Conghui Chen <conghui.chen@intel.com>
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Add init function for bvt scheduler, creating a runqueue and a period
timer, the timer interval is default as 1ms. The interval is the minimum
charging unit.
Tracked-On: #4410
Signed-off-by: Conghui Chen <conghui.chen@intel.com>
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
BVT (Borrowed virtual time) scheduler is used to schedule vCPUs on pCPU.
It has the concept of virtual time, vCPU with earliset virtual time is
dispatched first.
Main concepts:
tick timer:
a period tick is used to measure the physcial time in units of MCU
(minimum charing unit).
runqueue:
thread in the runqueue is ordered by virtual time.
weight:
each thread receives a share of the pCPU in proportion to its
weight.
context switch allowance:
the physcial time by which the current thread is allowed to advance
beyond the next runnable thread.
warp:
a thread with warp enabled will have a change to minus a value (Wi)
from virtual time to achieve higher priority.
virtual time:
AVT: actual virtual time, advance in proportional to weight.
EVT: effective virtual time.
EVT <- AVT - ( warp ? Wi : 0 )
SVT: scheduler virtual time, the minimum AVT in the runqueue.
Tracked-On: #4410
Signed-off-by: Conghui Chen <conghui.chen@intel.com>
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
1. Rename BOOT_CPU_ID to BSP_CPU_ID
2. Repace hardcoded value with BSP_CPU_ID when
ID of BSP is referenced.
Tracked-On: #4420
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Now only PCI MSI-X BAR access need dynamic register/unregister. Others don't need
unregister once it's registered. So we don't need to lock the vm level emul_mmio_lock
when we handle the MMIO access. Instead, we could use finer granularity lock in the
handler to ptotest the shared resource.
This patch fixed the dead lock issue when OVMF try to size the BAR size:
Becasue OVMF use ECAM to access the PCI configuration space, it will first hold vm
emul_mmio_lock, then calls vpci_handle_mmconfig_access. While this tries to size a
BAR which is also a MSI-X Table BAR, it will call register_mmio_emulation_handler to
register the MSI-X Table BAR MMIO access handler. This will causes the emul_mmio_lock
dead lock.
Tracked-On: #3475
Signed-off-by: Li Fei1 <fei1.li@intel.com>
Now we split passthrough PCI device from DM to HV, we could remove all the passthrough
PCI device unused code.
Tracked-On: #4371
Signed-off-by: Li Fei1 <fei1.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
In this case, we could handle all the passthrough PCI devices in ACRN hypervisor.
But we still need DM to initialize BAR resources and Intx for passthrough PCI
device for post-launched VM since these informations should been filled into
ACPI tables. So
1. we add a HC vm_assign_pcidev to pass the extra informations to replace the old
vm_assign_ptdev.
2. we saso remove HC vm_set_ptdev_msix_info since it could been setted by the post-launched
VM now same as SOS.
3. remove vm_map_ptdev_mmio call for PTDev in DM since ACRN hypervisor will handle these
BAR access.
4. the most important thing is to trap PCI configure space access for PTDev in HV for
post-launched VM and bypass the virtual PCI device configure space access to DM.
This patch doesn't do the clean work. Will do it in the next patch.
Tracked-On: #4371
Signed-off-by: Li Fei1 <fei1.li@intel.com>
Add assign/deassign PCI device hypercall APIs to assign a PCI device from SOS to
post-launched VM or deassign a PCI device from post-launched VM to SOS. This patch
is prepared for spliting passthrough PCI device from DM to HV.
The old assign/deassign ptdev APIs will be discarded.
Tracked-On: #4371
Signed-off-by: Li Fei1 <fei1.li@intel.com>
The previous fcf-protection fix broke the old gcc (older than
gcc 8 which is common on Ubuntu 18.04 and older distributions).
We only add fcf-protection=none for gcc8 and newer.
Tracked-On: #4358
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
apl-mrb need to access P2SB device, so add 00:0d.0 P2SB device to
whitelist for platform pci hidden device.
Tracked-On: #3475
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Reviewed-by: Binbin Wu <binbin.wu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
To enable gvt-d,need to allow the GPU IOMMU.
While gvt-d hasn't been enabled on APL yet,
so let APL disable GPU IOMMU.
v2 -> v3:
* let APL platforms disable GPU IOMMU.
Tracked-On: #4405
Signed-off-by: Junming Liu <junming.liu@intel.com>
Reviewed-by: Wu Binbin <binbin.wu@intel.com>
If one of the enabled VT-d DMAR units
doesn’t support snoop control,
then bit 11 of leaf PET of EPT is not set,
since the field is treated as reserved(0)
by VT-d hardware implementations
not supporting snoop control.
GUP IOMMU doesn’t support snoop control,
this patch add an option to disable
iommu snoop control for gvt-d.
v2 -> v3:
* refine the MICRO name and description.
Tracked-On: #4405
Signed-off-by: Junming Liu <junming.liu@intel.com>
Reviewed-by: Wu Binbin <binbin.wu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
On UEFI UP2 board, APs might execute HLT before SOS kernel INIT them.
After SOS kernel take over and will re-init the APs directly. The flows
from HV perspective is like:
HLT trap:
wait_event(VCPU_EVENT_VIRTUAL_INTERRUPT) -> sleep_thread
SOS kernel INIT, SIPI APs:
pause_vcpu(ZOMBIE) -> sleep_thread
-> reset_vcpu
-> launch_vcpu -> wake_vcpu
However, the last wake_vcpu will fail because the cpu event
VCPU_EVENT_VIRTUAL_INTERRUPT had not got signaled.
This patch will reset all vcpu events in reset_vcpu. If the thread was
previously waiting for a event, its waiting status will be cleared and
launch_vcpu will wake it to running.
Tracked-On: #4402
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
In platforms that support CAT, when it is enabled by ACRN, i.e.
IA32_resourceType_MASK_n registers are programmed with customized values,
it has impacts to the whole system.
The per guest flag GUEST_FLAG_CLOS_REQUIRED suggests that CAT may be
enabled in some guests, but not in others who don't have this flag,
which is conceptually incorrect.
This patch removes GUEST_FLAG_CLOS_REQUIRED, and adds a new Kconfig
entry CAT_ENABLED for CAT enabling. When it's enabled, platform_clos_array[]
defines a set of system-wide Class of Service (COS, or CLOS), and the
per guest vm_configs[].clos associates the guest with particular CLOS.
Tracked-On: #2462
Signed-off-by: Zide Chen <zide.chen@intel.com>
In some build env (Ubuntu 19.10 as example), gcc enabled the option
-fcf-protection by default. But this option is not compatible with
-mindirect-branch. Which could trigger following build error:
fail to build with gcc-9 [error: ‘-mindirect-branch’ and
‘-fcf-protection’ are not compatible]
-mindirect-branch is mandatory for retpoline mitigation and always
enabled for ACRN build. We disable -fcf-protection here for ACRN
build.
Tracked-On: #4358
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Wu Binbin <binbin.wu@intel.com>
Currently panic() and pr_xxx() statements before init_primary_pcpu_post()
won't be printed, which is inconvenient and misleading for debugging.
This patch makes pr_xxx() APIs working before init_pcpu_pre():
- clear .bss in init.c, which makes sense to clear .bss at the very beginning
of initialization code. Also this makes it possible to call init_logmsg()
before init_pcpu_pre().
- move parse_hv_cmdline() and uart16550_init(true) to init.c.
- refine ticks_to_us() to handle the case that it's called before
calibrate_tsc(). As a side effect, it prints "0us" in early pr_xxx() calls.
- call init_debug_pre() in init_primary_pcpu() and after this point,
both printf() and pr_xxx() APIs are available.
However, this patch doesn't address the issue that pr_xxx() could be called
on PCPUs that set_current_pcpu_id() hasn't been called, which implies that
the PCPU ID shown in early logs may not be accurate.
Tracked-On: #2987
Signed-off-by: Zide Chen <zide.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
it is better to init bdfs_from_drhds.pci_bdf_map_count
before it is passed to other function to do:
bdfs_from_drhds->pci_bdf_map_count++
Tracked-On: #3875
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Reviewed-by: Fei Li <fei1.li@intel.com>
INVALID_BIT_INDEX has 16 bits only, which removes all pcpu_id that
is >= 16 from the destination mask.
Tracked-On: #4354
Signed-off-by: Zide Chen <zide.chen@intel.com>
1. Align the coding style for these MACROs
2. Align the values of fixed VECTORs
Tracked-On: #4348
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
