- since now we don't need to print error messages if copy_to/from_gpa()
fails, then in many cases we can simplify the function return handling.
In the following example, my fix could change the 'ret' value from
the original '-1' to the actual errno returned from copy_to_gpa(). But
this is valid. Ideally we may replace all '-1' with the actual errno.
- if (copy_to_gpa() < 0) {
- pr_err("error messages");
- ret = -1;
- } else {
- ret = 0;
- }
+ ret = copy_to_gpa();
- in most cases, 'ret' is declared with a default value 0 or -1, then the
redundant assignment statements can be removed.
- replace white spaces with tabs.
Tracked-On: #3854
Signed-off-by: Zide Chen <zide.chen@intel.com>
The cupid() can be replaced with cupid_subleaf, which is more clear.
Having both APIs makes reading difficult.
Tracked-On: #4526
Signed-off-by: Li Fei1 <fei1.li@intel.com>
To support server platforms with more than 8 IO-APICs
Tracked-On: #4151
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Acked-by: Eddie Dong <eddie.dong@Intel.com>
For SOS VM, when the target platform has multiple IO-APICs, there
should be equal number of virtual IO-APICs.
This patch adds support for emulating multiple vIOAPICs per VM.
Tracked-On: #4151
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Acked-by: Eddie Dong <eddie.dong@Intel.com>
MADT is used to specify the GSI base for each IO-APIC and the number of
interrupt pins per IO-APIC is programmed into Max. Redir. Entry register of
that IO-APIC.
On platforms with multiple IO-APICs, there can be holes in the GSI space.
For example, on a platform with 2 IO-APICs, the following configuration has
a hole (from 24 to 31) in the GSI space.
IO-APIC 1: GSI base - 0, number of pins - 24
IO-APIC 2: GSI base - 32, number of pins - 8
This patch also adjusts the size for variables used to represent the total
number of IO-APICs on the system from uint16_t to uint8_t as the ACPI MADT
uses only 8-bits to indicate the unique IO-APIC IDs.
Tracked-On: #4151
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Acked-by: Eddie Dong <eddie.dong@Intel.com>
As ACRN prepares to support platforms with multiple IO-APICs,
GSI is a better way to represent physical and virtual INTx interrupt
source.
1) This patch replaces usage of "pin" with "gsi" whereever applicable
across the modules.
2) PIC pin to gsi is trickier and needs to consider the usage of
"Interrupt Source Override" structure in ACPI for the corresponding VM.
Tracked-On: #4151
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Acked-by: Eddie Dong <eddie.dong@Intel.com>
Changes the mmio handler data from that of the acrn_vm struct to
the acrn_vioapic.
Add nr_pins and base_addr to the acrn_vioapic data structure.
Tracked-On: #4151
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Acked-by: Eddie Dong <eddie.dong@Intel.com>
Reverts 538ba08c: hv:Add vpin to ptdev entry mapping for vpic/vioapic
ACRN uses an array of size per VM to store ptirq entries against the vIOAPIC pin
and an array of size per VM to store ptirq entries against the vPIC pin.
This is done to speed up "ptirq entry" lookup at runtime for Level triggered
interrupts in API ptirq_intx_ack used on EOI.
This patch switches the lookup API for INTx interrupts to the API,
ptirq_lookup_entry_by_sid
This could add delay to processing EOI for Level triggered interrupts.
Trade-off here is space saved for array/s of size CONFIG_MAX_IOAPIC_LINES with 8 bytes
per data. On a server platform, ACRN needs to emulate multiple vIOAPICs for
SOS VM, same as the number of physical IO-APICs. Thereby ACRN would need around
10 such arrays per VM.
Removes the need of "pic_pin" except for the APIs facing the hypercalls
hcall_set_ptdev_intr_info, hcall_reset_ptdev_intr_info
Tracked-On: #4151
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Acked-by: Eddie Dong <eddie.dong@Intel.com>
- need to specify the load_addr in the multiboot2 address tag. GRUB needs
it to correctly calculate the ACRN binary's load size if load_end_addr is
a non-zero value.
- multiboot2 can be enabled if hypervisor relocation is disabled.
- print the name of the boot loader. This might be helpful if the boot
loader, e.g. GRUB, inludes its version in the name string.
Tracked-On: #4441
Signed-off-by: Victor Sun <victor.sun@intel.com>
Signed-off-by: Zide Chen <zide.chen@intel.com>
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
There're some PCI devices need special handler for vendor-specical feature or
capability CFG access. The Intel GPU is one of them. In order to keep the ACRN-HV
clean, we want to throw the qurik part of PCI CFG asccess to DM to handle.
To achieve this, we implement per-device policy base on whether it needs quirk handler
for a VM: each device could configure as "quirk pass through device" or not. For a
"quirk pass through device", we will handle the general part in HV and the quirk part
in DM. For a non "quirk pass through device", we will handle all the part in HV.
Tracked-On: #4371
Signed-off-by: Li Fei1 <fei1.li@intel.com>
There're some cases the SOS (higher severity guest) needs to access the
post-launched VM (lower severity guest) PCI CFG space:
1. The SR-IOV PF needs to reset the VF
2. Some pass through device still need DM to handle some quirk.
In the case a device is assigned to a UOS and is not in a zombie state, the SOS
is able to access, if and only if the SOS has higher severity than the UOS.
Tracked-On: #4371
Signed-off-by: Li Fei1 <fei1.li@intel.com>
To avoid information leakage, we need to ensure that the device is
inaccessble when it does not exist.
For SR-IOV disabled VF device, we have the following operations.
1. The configuration space accessing will get 0xFFFFFFFF as a
return value after set the device state to zombie.
2. The BAR MMIO EPT mapping are removed, the accesssing causes
EPT violation.
3. The device will be detached from IOMMU.
4. The IRQ pin and vector are released.
Tracked-On: #4433
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
As pci_devices.h is included by <page.h>, need to prepare pci_devices.h
for nuc6cayh and apl-up2 board.
Also the #error info in generic/pci_devices.h should be removed, otherwise
the build will be failed in sdc/sdc2/industry scenarios.
Tracked-On: #4458
Signed-off-by: Victor Sun <victor.sun@intel.com>
For a pre-launched VM, a region from PTDEV_HI_MMIO_START is used to store
64bit vBARs of PT devices which address is high than 4G. The region should
be located after all user memory space and be coverd by guest EPT address.
Tracked-On: #4458
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
ve820.c is a common file in arch/x86/guest/ now, so move function of
create_sos_vm_e820() to this file to make code structure clear;
Tracked-On: #4458
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Remove useless per board ve820.c as arch/x86/guest/ve820.c is common for
all boards now;
Tracked-On: #4458
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
hypervisor/arch/x86/configs/$(BOARD)/ve820.c is used to store pre-launched
VM specific e820 entries according to memory configuration of customer.
It should be a scenario based configurations but we had to put it in per
board foler because of different board memory settings. This brings concerns
to customer on configuration orgnization.
Currently the file provides same e820 layout for all pre-launched VMs, but
they should have different e820 when their memory are configured differently.
Although we have acrn-config tool to generate ve802.c automatically, it
is not friendly to modify hardcoded ve820 layout manually, so the patch
changes the entries initialization method by calculating each entry item
in C code.
Tracked-On: #4458
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Currently ept_pages_info[] is initialized with first element only that force
VM of id 0 using SOS EPT pages. This is incorrect for logical partition and
hybrid scenario. Considering SOS_RAM_SIZE and UOS_RAM_SIZE are configured
separately, we should use different ept pages accordingly.
So, the PRE_VM_NUM/SOS_VM_NUM and MAX_POST_VM_NUM macros are introduced to
resolve this issue. The macros would be generated by acrn-config tool when
user configure ACRN for their specific scenario.
One more thing, that when UOS_RAM_SIZE is less then 2GB, the EPT address
range should be (4G + PLATFORM_HI_MMIO_SIZE).
Tracked-On: #4458
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
change vmsi_read_cfg to read_vmsi_cfg, same applies to writing
change vmsix_read_cfg to read_vmsix_cfg, same applies to writing
Tracked-On: #4433
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Move CFG read/write function for PCI-compatible Configuration Mechanism from
debug/uartuart16550.c to hw/pci.c and rename CFG read/write function for
PCI-compatible Configuration Mechanism to pci_pio_read/write_cfg to align with
CFG read/write function pci_mmcfg_read/write_cfg for PCI Express Enhanced
Configuration Access Mechanism.
Tracked-On: #4371
Signed-off-by: Li Fei1 <fei1.li@intel.com>
In order to add GVT-D support, we need pass through stolen memory and opregion memroy
to the post-launched VM. To implement this, we first reserve the GPA for stolen memory
and opregion memory through post-launched VM e820 table. Then we would build EPT mapping
between the GPA and the stolen memory and opregion memory real HPA. The last, we need to
return the GPA to post-launched VM if it wants to read the stolen memory and opregion
memory address and prevent post-launched VM to write the stolen memory and opregion memory
address register for now.
We do the GPA reserve and GPA to HPA EPT mapping in ACRN-DM and the stolen memory and
opregion memory CFG space register access emulation in ACRN-HV.
Tracked-On: #4371
Signed-off-by: Li Fei1 <fei1.li@intel.com>
Hypervisor uses 2MB large page, and if either CONFIG_HV_RAM_START or
CONFIG_HV_RAM_SIZE is not aligned to 2MB, ACRN won't boot. Add static check
to avoid unexpected boot failures.
If CONFIG_RELOC is enabled, CONFIG_HV_RAM_START is not directly referred
by the code, but it causes problems because ld_text_end could be relocated
to an address that is not 2MB aligned which fails mmu_modify_or_del().
Tracked-On: #4441
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
Signed-off-by: Zide Chen <zide.chen@intel.com>
VM needs to check if it owns this device before deiniting it.
Tracked-On: #4433
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Change enable_vf/disable_vf to create_vfs/disable_vfs
Change base member of pci_vbar to base_gpa
Tracked-On: #4433
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The vf_bdf is not initialized when invoking pci_pdev_read_cfg function.
Tracked-On: #4433
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
We didn't support SR-IOV capability of PF in UOS for now, we should
hide the SR-IOV capability if we pass through the PF to a UOS.
For now, we don't support assignment of PF to a UOS.
Tracked-On: #4433
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@Intel.com>
Emulate Device ID, Vendor ID and MSE(Memory Space Enable) bit in
configuration space for an assigned VF, initialize assgined VF Bars.
The Device ID comes from PF's SRIOV capability
The Vendor ID comes from PF's Vendor ID
The PCI MSE bit always be set when VM reads from an assigned VF.
Tracked-On: #4433
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
If a VF instance is disabled, we didn’t remove the vdev instance,
only set the vdev as a zombie vdev instance, indicating that it
cannot be accessed anymore.
Tracked-On: #4433
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Change name find_vdev to find_available_vdev and add comments
Tracked-On: #4433
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The VF BARs are initialized by its PF SRIOV capability
Tracked-On: #4433
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Refine coding style to wrap msix map/unmap operations, clean up repeated
assignments for msix mmio_hpa and mmio_size.
Tracked-On: #4433
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Add _v prefix for some function name to indicate this function wants to operate
on virtual CFG space or virtual BAR register.
Tracked-On: #4371
Signed-off-by: Li Fei1 <fei1.li@intel.com>
Since there is no RTVM requirement for sdc2 scenario, replace uuid
495ae2e5-2603-4d64-af76-d4bc5a8ec0e5 which is dedicated to RTVM with
615db82a-e189-4b4f-8dbb-d321343e4ab3
Tracked-On: #4472
Signed-off-by: fuzhongl <fuzhong.liu@intel.com>
Reviewed-by: Sun Victor <victor.sun@intel.com>
Removed the pci_vdev_write_cfg_u8/u16/u32 APIs and only used
pci_vdev_write_cfg as the API for writing vdev's cfgdata
Tracked-On: #4433
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
In Commit 127c73c3, we remove the strict check for adding page table mapping. However,
we just replace the ASSERT of pr_fatal in add_pte. This is not enough. We still add
the virtual address by 4K if the page table mapping is exist and check the virtual
address is over the virtual address region for this mapping. Otherwise, The complain
will continue for 512 times at most.
Tracked-On: #3475
Signed-off-by: Li Fei1 <fei1.li@intel.com>
Add cfg_header_read_cfg and cfg_header_write_cfg to handle the 1st 64B
CFG Space header PCI configuration space.
Only Command and Status Registers are pass through;
Only Command and Status Registers and Base Address Registers are writable.
In order to implement this, we add two type bit mask for per 4B register:
pass through mask and read-only mask. When pass through bit mask is set, this
means this bit of this 4B register is pass through, otherwise, it is virtualized;
When read-only mask is set, this means this bit of this 4B register is read-only,
otherwise, it's writable. We should write it to physical CFG space or virtual
CFG space base on whether the pass through bit mask is set or not.
Tracked-On: #4371
Signed-off-by: Li Fei1 <fei1.li@intel.com>
1. Renames DEFINE_IOAPIC_SID with DEFINE_INTX_SID as the virtual source can
be IOAPIC or PIC
2. Rename the src member of source_id.intx_id to ctlr to indicate interrupt
controller
2. Changes the type of src member of source_id.intx_id from uint32_t to
enum with INTX_CTLR_IOAPIC and INTX_CTLR_PIC
Tracked-On: #4447
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
for vpci_bridge it is better just write the virtual configure space,
so move out the PCI bridge phyiscal cfg write to pci.c
also add some rules in config pci bridge.
Tracked-On: #3381
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
For SRIOV needs ARI support, so enable it in HV if
the PCI bridge support it.
TODO:
need check all the PCI devices under this bridge can support ARI,
if not, it is better not enable it as PCIe spec. That check will be
done when scanning PCI devices.
Tracked-On: #3381
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
- remove limit of CONFIG_HV_RAM_SIZE which is for scenario of 2 VMs only,
the default size from Kconfig could build scenario which up to 5 VMs;
- rename whl-ipc-i5_acpi_info.h to platform_acpi_info.h, since the former
one should be generated by acrn-config tool;
- add SOS related macros in misc.h, otherwise build scenarios which has
SOS VM would be failed;
Tracked-On: #4463
Signed-off-by: Victor Sun <victor.sun@intel.com>
- remove .data and .text directives. We want to place all the boot data and
text in the .entry section since the boot code is different from others
in terms of relocation fixup. With this change, the page tables are in
entry section now and it's aligned at 4KB.
- regardless CONFIG_MULTIBOOT2 is set or not, the 64-bit entry offset is
fixed at 0x1200:
0x00 -- 0x10: Multiboot1 header
0x10 -- 0x88: Multiboot2 header if CONFIG_MULTIBOOT2 is set
0x1000: start of entry section: cpu_primary_start_32
0x1200: cpu_primary_start_64 (thanks to the '.org 0x200' directive)
GDT tables
initial page tables
etc.
Tracked-On: #4441
Reviewed-by: Fengwei Yin <fengwei.yin@intel.com>
Signed-off-by: Zide Chen <zide.chen@intel.com>
This is to enable relocation for code32.
- RIP relative addressing is available in x86-64 only so we manually add
relocation delta to the target symbols to fixup code32.
- both code32 and code64 need to load GDT hence both need to fixup GDT
pointer. This patch declares separate GDT pointer cpu_primary64_gdt_ptr
for code64 to avoid double fixup.
- manually fixup cpu_primary64_gdt_ptr in code64, but not rely on relocate()
to do that. Otherwise it's very confusing that symbols from same file could
be fixed up externally by relocate() or self-relocated.
- to make it clear, define a new symbol ld_entry_end representing the end of
the boot code that needs manually fixup, and use this symbol in relocate()
to filter out all symbols belong to the entry sections.
Tracked-On: #4441
Reviewed-by: Fengwei Yin <fengwei.yin@intel.com>
Signed-off-by: Zide Chen <zide.chen@intel.com>
GRUB multiboot2 doesn't support relocation for ELF, which means it can't
load acrn.32.out to other address other than the one specified in ELF
header. Thus we need to use the raw binary file acrn.bin, and add
address/entry address/relocatable tags to instruct multiboot2 loader
how to load the raw binary.
Tracked-On: #4441
Reviewed-by: Fengwei Yin <fengwei.yin@intel.com>
Signed-off-by: Zide Chen <zide.chen@intel.com>
In direct boot mode, boot_context[] which is saved from cpu_primary_save_32()
is no longer used since commit 6beb34c3cb ("vm_load: update init gdt
preparation"). Thus, the call to it and the function itself can be removed.
Tracked-On: #4441
Reviewed-by: Fengwei Yin <fengwei.yin@intel.com>
Signed-off-by: Zide Chen <zide.chen@intel.com>
reduce the use of similar APIs (particularly the name confusion) for
CFG space read/write.
Tracked-On: #4433
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Make the name of the functions more accurate
Tracked-On: #4433
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
