For each vm_array[] item, its config is located in corresponding
index of vm_configs[], so vm_config pointer is not needed any more.
Tracked-On: #2291
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Under sharing mode, VM0 is identical with SOS VM. But the coupling of
SOS VM and VM 0 is not friendly for partition mode.
This patch is a pure term change of vm0 to sos VM, it does not change
any code logic or senmantic.
Tracked-On: #2291
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This patch is a pure term change of vm_description to vm_config,
the struct name of vm_description is changed to acrn_vm_config.
The patch does not change any code logic or senmantic.
Tracked-On: #2291
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Because ACRN_REQUEST_TMR_UPDATE is not needed anymore, this commit remove
the MACRO definition and its related logic, including following functions:
- apicv_batch_set_tmr()
- vlapic_apicv_batch_set_tmr()
- vlapic_set_tmr_one_vec()
- vioapic_update_tmr()
Tracked-On: #2343
Signed-off-by: Yan, Like <like.yan@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Current ACRN implementation update TMR bits one time only when related RTE fields changed,
which is not acting like actual hardware.
From SDM vol3 10.8.4:
"Upon acceptance of an interrupt into the IRR, the corresponding TMR bit is cleared for
edge-triggered interrupts and set for leveltriggered interrupts."
This commit change the ACRN implementation to set/clear corresponding TMR bit when inject
intr to vlapic.
Tracked-On: #2343
Signed-off-by: Yan, Like <like.yan@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
remove few calls to return statement in routines.
Tracked-On: #861
Signed-off-by: Chaohong guo <chaohong.guo@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
To meet MISRA, remove multiple return in the func.
Tracked-On: #861
Signed-off-by: Chaohong guo <chaohong.guo@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
MISRA compaint that the vlapic_icrlo_write_handler 's cyclomatic
complexity is greater than 20. Try to remove multiple returns/exits.
Tracked-On: #861
Signed-off-by: Chaohong guo <chaohong.guo@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
To meet MISRA, remove few return in routines of vlapic.
Tracked-On: #861
Signed-off-by: Chaohong guo <chaohong.guo@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
add @pre for routines and bracks for condition checking in vlapic.c
Tracked-On: #861
Signed-off-by: Chaohong guo <chaohong.guo@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
If a argment is not changed in function, MISRA recommends to add const
qualifier for that argement.
Tracked-On: #861
Signed-off-by: Chaohong guo <chaohong.guo@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The static global variable apicv_apic_access_addr is used only by
vlapic_apicv_get_apic_access_addr(), to remove the warning by MISRA,
move it into function scope.
Tracked-On: #861
Signed-off-by: Chaohong guo <chaohong.guo@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
- implement unified APIs to access guest_msrs[] under struct acrn_vcpu.
- use these new APIs to read/write emulated TSC_DEADLINE MSR
- switch world_msrs[] and guest_msrs[] during world switch for MSRs that
need world isolation
- remove the old guest_msrs[] array and it's index macros.
Tracked-On: #1867
Signed-off-by: Zide Chen <zide.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This patch adds the necessary space before or after binary operator.
v1 -> v2:
* minor fix related to integer
[i - 1] ====> [i - 1U]
Tracked-On: #861
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
replace CPU_PAGE_SIZE with PAGE_SIZE
These two MACROs are duplicated and PAGE_SIZE is a more reasonable name.
Tracked-On: #861
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This patch fixes the following violations:
1. Implicit conversion: actual to formal param
2. Value is not of appropriate type
3. No cast for widening complex int expression
4. Widening cast on complex integer expression
5. Narrower int conversion without cast.
Tracked-On: #861
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
`@return` is dedicated for brief description of return values, not for comments
stating actual return values. In addition, sphinx + breathe does not join
multiple adjacent `@return`. This results in multiple `Return` sections in the
generated document, which is confusing.
This patch replaces `@return` with `@retval` for the lists of return
values. Adjacent `@retval` can be joined into one list by breathe.
v1 -> v2:
* Replace return value descriptions like `negative` and `positive` with
expressions like `<0` and `>0` in `@retval`.
* Keep the list of `@retval` comprehensive, even when there is a `@return` to
generally describe what the return value means.
* Drop duplicated `@return` when it does not give more information than the
`@retval` list.
Tracked-On: #1595
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
It is preferred to state the absence of a return value explicitly in the
doxygen-stile comments. Currently there are different styles of doing this,
including:
@return None
@return NULL
@return void
@return N/A
This patch unifies the above with `@return None`.
Tracked-On: #1595
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
MISRA-C requires that if the return value of a function call is
assigned to a local variable, this value shall be used in all paths.
This patch moves the variable assignment right before the moment that
the variable is used.
Tracked-On: #861
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
IEC 61508,ISO 26262 standards highly recommend single-exit rule.
Reduce the count of the "return entries".
Fix the violations which is comply with the cases list below:
1.Function has 2 return entries.
2.The first return entry is used to return the error code of
checking variable whether is valid.
Fix the violations in "if else" format.
Tracked-On: #861
Signed-off-by: Huihuang Shi <huihuang.shi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
fix the following integer violations:
1. Signed/unsigned conversion without cast
2. Literal value requires a U suffix
3. Implicit conversion of underlying type
v3 -> v4:
* change the type of npk_loglevel/mem_loglevel/console_loglevel
from uint32_t to uint16_t
v2 -> v3:
* discard the return value of update_ept
* discard changes related to npk loglevel
v1 -> v2:
* remove the unnecessary changes related to the false positive
issues caused by scanning tool
* change the type of the local variable 'vlapic_id' from uint8_t
to uint32_t in function 'vlapic_build_id'
* change the type of the struct member 'flags' in shared_buf from
uint64_t to uint32_t
Tracked-On: #861
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
MISRA-C requires that the function call in which the returned
value is discarded shall be clearly indicated using (void).
This patch fixes the violations related to the following
function calls.
- vlapic_set_intr
- vlapic_intr_edge
Tracked-On: #861
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
MISRA-C requires that the controlling expression of an if statement or
an iteration-statement shall be Boolean type.
v1 -> v2:
* update the U suffix of constant to let the type of operands
to bit operations (&) is the same.
* update the type of 'i' from uint64_t to uint16_t in
'profiling_set_control' since it is limited by phys_cpu_num,
which is uint16_t.
Tracked-On: #861
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
For data structure types "struct vm", its name is identical
with variable name in the same scope. This is a MISRA C violation.
Naming convention rule:If the data structure type is used by multi
modules, its corresponding logic resource is exposed to external
components (such as SOS, UOS), and its name meaning is simplistic
(such as vcpu, vm), its name needs prefix "acrn_".
The following udpates are made:
struct vm *vm-->struct acrn_vm *vm
Tracked-On: #861
Signed-off-by: Xiangyang Wu <xiangyang.wu@linux.intel.com>
For data structure types "struct vcpu_arch", its name
shall follow Naming convention.
Naming convention rule:If the data structure type is
used by multi modules, its corresponding logic resource
is exposed to external components (such as SOS, UOS),
and its name meaning is simplistic (such as vcpu, vm),
its name needs prefix "acrn_". Variable name can be
shortened from its data structure type name.
The following udpates are made:
struct vcpu_arch arch_vcpu-->struct acrn_vcpu_arch arch
Tracked-On: #861
Signed-off-by: Xiangyang Wu <xiangyang.wu@linux.intel.com>
For data structure types "struct vcpu", its name is identical
with variable name in the same scope. This is a MISRA C violation.
Naming convention rule:If the data structure type is used by multi
modules, its corresponding logic resource is exposed to external
components (such as SOS, UOS), and its name meaning is simplistic
(such as vcpu, vm), its name needs prefix "acrn_".
The following udpates are made:
struct vcpu *vcpu-->struct acrn_vcpu *vcpu
Tracked-On: #861
Signed-off-by: Xiangyang Wu <xiangyang.wu@linux.intel.com>
ACRN, in partition mode, supports LAPIC pass-thru to guests. Guest needs
to use x2APIC mode of LAPIC for pass-thru to be enabled.
ACRN also needs the user to configure lapic_pt to true in vm_desc
for the VM.
Interrupt Command Register (ICR) is the only APIC register that is
intercepted. Reference code in partition/vm_description.c enables
LAPIC pass-thru for vm2.
Tracked-On: #1626
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Reviewed-by: Xu Anthony <anthony.xu@intel.com>
This patch adds support for self-IPI virtualization when guest
uses vLAPIC in x2APIC mode.
Tracked-On: #1626
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Reviewed-by: Xu Anthony <anthony.xu@intel.com>
When guest switches from xAPIC mode to x2APIC mode of vLAPIC operation,
MSRs are used to access vLAPIC. This patch adds APICv support for
MSR accesses to vLAPIC. Switching from xAPIC to x2APIC is supported via
APIC BASE MSR. Other modifications like disabling and switching back to
xAPIC are not supported.
Tracked-On: #1626
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Reviewed-by: Xu Anthony <anthony.xu@intel.com>
This patch adds support to return APIC ID if guest uses vLAPIC
in x2APIC mode.
Tracked-On: #1626
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Reviewed-by: Xu Anthony <anthony.xu@intel.com>
This patch converts x2APIC MSR accesses to corresponding LAPIC MMIO offset to
utitlize vlapic_write/read APIs to virtualize LAPIC. Also adds support to inject
GP fault when read-only registers are attempted to be written to or vice versa.
Tracked-On: #1626
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Reviewed-by: Xu Anthony <anthony.xu@intel.com>
When guest uses vLAPIC in x2APIC mode, ICR write is a single MSR write.
Also, the destination field for device interrupts and IPIs should not be
handled in the same way as xAPIC mode. This patch adds support for x2APIC
mode operation of guest vLAPIC.
Tracked-On: #1626
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Reviewed-by: Xu Anthony <anthony.xu@intel.com>
x2APIC ID and LDR are in different format compared to xAPIC mode of operation.
This patch adds code to build ID and LDR when guest uses vLAPIC in x2APIC mode.
Tracked-On: #1626
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Reviewed-by: Xu Anthony <anthony.xu@intel.com>
Accessing x2APIC MSRs in xAPIC mode should result in GP exception according
to SDM section 10.12.2. Adding support to ACRN to inject GP into guests for
the same reason.
Tracked-On: #1626
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Reviewed-by: Xu Anthony <anthony.xu@intel.com>
The operands to shift operations (<<, >>) shall be unsigned integers.
v1 -> v2:
* replace 12U with CPU_PAGE_SHIFT when it is address shift case.
* replace 6UL with 0x6UL
Tracked-On: #861
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Guest OS can use vLAPIC in x2APIC mode. Upon vlapic_reset, vLAPIC should
be set to xAPIC mode.
Tracked-On: #1626
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Functions shall not call themselves, either directly or indirectly.
V1->V2:
add pre-assumption.
V2->V3:
when vector < 16,call vlapic_set_error
Tracked-On: #861
Signed-off-by: Huihuang Shi <huihuang.shi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Currently we compare vcpu_id with phys_cpu_num,
vcpu_id is not related with phys_cpu_num,
this patch cleanup them.
Tracked-On: #861
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Li, Fei1 <fei1.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Fix violations for function whose parameter can be read-only.
Tracked-On: #861
Signed-off-by: Huihuang Shi <huihuang.shi@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Pointer param should be declared pointer to const if
the parameter is keeped read-only.
This patch changes pointer param whose name is vm.
Tracked-On:#861
Signed-off-by: Huihuang Shi <huihuang.shi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
-- Not return NULL for vcpu_from_vid
We have replaced dynamic memory with static memory for vcpu,
then if vcpu_id is valid, this API should not return NULL.
-- Simplify the for-loop when walk through the vcpu
Tracked-On: #861
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Li, Fei1 <fei1.li@intel.com>
Reviewed-by: Anthony Xu <anthony.xu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Return value should be checked,fix it by add
"void" when the function return value is not used.
V1->V2:
replace printf with pr_warn.
V2->V3:
change the commit to make read easily.
Tracked-On:#861
Signed-off-by: Huihuang Shi <huihuang.shi@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
MISRA-C required the suffix(U/UL), such as:
(1) ---> (1U)
(1) ---> (1UL)
(1U << 0) ---> (1U << 0U)
This patch will add the suffix(U/UL) to come up MISRA-C into
hypervisor/include directory.
Tracked-On: #1468
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
to enable APICv Posted interrupt supported, following the
specifications defined in Intel SDM Section #29.6, Volume3.
Posted-interrupt processing is a feature by which a processor
processes the virtual interrupts by recording them as pending
on the virtual-APIC page.
Injecting interrupts to VCPU from remote CPU without causing
VM exit on the destination, following steps in SDM Section 29.6,volume3:
Tracked-On: #1447
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Move vcpu mode set to function vcpu_set_regs.
Tracked-On: #1231
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
With reset_vcpu_regs as pre-condition, we only need to set
cs_selector and cs_base for AP.
We call set_ap_entry in two places:
1. When emulation AP SIPI
2. When sos BSP resume from S3. The BSP is resumed to real
mode with entry set to wakeup_vec. We call set_ap_entry
API here with entry twisted from wakeup_vec.
Tracked-On: #1231
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
- add missing brackets for 'if/else' statements based on MISRA-C
requirements
v1 -> v2:
* add brackets for each conditions in 'if' statements to improve
the readability
* modify 'ptdev_init' to make the logic clearer
Tracked-On: #861
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
1.Function return type inconsistent
2.cast on a constant value
V1->V2 add () to return type
V2->V3 keep the sbuf_get and sbuf_put return code
Tracked-On: #861
Signed-off-by: Huihuang Shi <huihuang.shi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
MISRA-C requires that there should be no unused parameters in
functions.
In some cases, we will keep the unused parameters.
vmexit handler is one example. It is used as function pointer.
Some of the vmexit handlers use the input parameter 'vcpu', some of
them don't. We still need to keep the unused parameters 'vcpu' for
those handlers don't use 'vcpu'.
This patch removes the unused parameters that is not being used
unconditionally.
v1 -> v2:
* remove the non-implemented API 'vlapic_id_write_handler'
Tracked-On: #861
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
MISRA-C requires that every switch case shall be terminated with break
to avoid the unintentional fall through.
The code will become redundant if we enforce this rule.
So, we will keep the current implementation for the following two cases.
1. The fall through is intentional.
2. The function is returned in the switch case.
If we decide to eliminate the mutiple returns in one function later,
this case would be handled properly at that time.
What this patch does:
- add the mssing break for the default case
- add the pre condition for some functions and remove the corresponding
panic which will never happen since the function caller could guarantee
the pre condition based on the code implementation
v1 -> v2:
* remove the redundant cases above default in 'vlapic_get_lvtptr'
* add the similar pre condition for 'lvt_off_to_idx' as
'vlapic_get_lvtptr' since all the function callers could guarantee it
* remove the assertion in 'lvt_off_to_idx' since the pre condition
could guarantee that the assertion will never happen
* add the similar pre condition for 'vpic_set_irqstate' as
'vioapic_set_irqstate' since all the function callers could guarantee it
* remove the assertion in 'vpic_set_irqstate' since the pre condition
could guarantee that the assertion will never happen
Tracked-On: #861
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
- use sizeof(struct lapic_regs),instead of arbitrary size
to lear 'apic_page' memory region in vlapic.c
- fix potential buffer overflow issues in vpic.c & ioapic.c
Tracked-On: #1252
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
-- update 'vlapic' in 'struct vcpu_arch' from pointer
to instance
-- add inline function(vcpu_vlapic) in vcpu.h
Tracked-On: #861
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Replace pointer with static memory for apicv_apic_access_addr
Tracked-On: #861
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
- convert function like macros to inline functions based on MISRA-C
requirement
- remove some unused and duplicated macros
Tracked-On: #861
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
as SOS mapped all memory at the beginning, so trap vlapic need unmap its
memory; for UOS, there is no need as UOS never mapped it.
Tracked-On: #1124
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
MISRA-C requires that the controlling expression of an if statement or
an iteration-statement shall be Boolean type.
Tracked-On: #861
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
VMs in partition mode uses a kernel patch to switch to physical mode xAPIC.
The kernel patch together with this patch makes sure device MSIs use
physical mode as DM and physical APIC IDs in Destination field.
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
- by default, ACRN will not support platform without
below APICv features:
-- Use TPR shadow
-- APIC-register virtualization
- remove mmio emualtion of local APIC for guest
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
- call these functions directly, no need to register
callbacks.
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
The apicv is one hardware acceleration feature of vlapic. All vlapic
APIs should keep vlapic_ as the prefix.
Signed-off-by: Yu Wang <yu1.wang@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
From SDM Vol3 10.4.6:
Some processors permit software to modify the APIC ID. However, the
ability of software to modify the APIC ID is processor model specific.
Because of this, operating system software should avoid writing to the
local APIC ID register.
So to permit change APIC ID is not one *must* feature. Keep it simple,
we are also reject to modify it.
This patch does code cleaning up for LAPIC ID related emulation.
Signed-off-by: Yu Wang <yu1.wang@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
- Clean up some code regarding to % and / operations since bit
operations are faster.
x % 64U ---> x & 0x3fU
x % 32U ---> x & 0x1fU
x % 16U ---> x & 0xfU
x % 8U ---> x & 0x7U
x % 4U ---> x & 0x3U
x % 2U ---> x & 0x1U
x / 64U ---> x >> 6U
x / 32U ---> x >> 5U
x / 16U ---> x >> 4U
x / 8U ---> x >> 3U
x / 4U ---> x >> 2U
x / 2U ---> x >> 1U
- Minor changes regarding to coding styles
Tracked-On: #861
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
- update 'apic_page' field in 'struct acrn_vlapic',
from pointer type to 'struct lapic_regs' type.
- delete 'pir' and update 'pir_desc' to 'vlapic_pir_desc'
type.
- fix potential memory leak in 'vlapic_create()'
should free allocated memory in case of registering
mmio handler failure.
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Fix the parameter type mismatch between API declaration and definition.
Tracked-On: #861
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
-- change two timer callbacks to void type
-- ignore the return value for add_timer
-- add (void) before several functions(memset/memcpy/
vcpu_get_xxx)
v1-->v2:
ignore the return value for add_timer
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
vlapic_vmx_vapic_set_tmr is nobody use now, remove it first to avoid
build warning.
Signed-off-by: Yu Wang <yu1.wang@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
ACRN currently do not support SMM and SMI. Print one explicit warning
for it.
Signed-off-by: Yu Wang <yu1.wang@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
From SDM Vol3 Table 10-1 Local APIC Register Address Map. The 0x3F0 is
reserved.
Signed-off-by: Yu Wang <yu1.wang@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Currently, ACRN hasn't expose x2apic capability through cpuid.
And x2apic related code in vlapic.c has no real functionality. This
patch clear related code.
Signed-off-by: Yu Wang <yu1.wang@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Now the DM has adopted the new VHM request state transitions and
REQ_STATE_FAILED is obsolete since neither VHM nor kernel mediators will set the
state to FAILED.
This patch drops the definition to REQ_STATE_FAILED in the hypervisor, makes
''processed'' unsigned to make the compiler happy about typing and simplifies
error handling in the following ways.
* (dm_)emulate_(pio|mmio)_post no longer returns an error code, by introducing a
constraint that these functions must be called after an I/O request
completes (which is the case in the current design) and assuming
handlers/VHM/DM will always give a value for reads (typically all 1's if the
requested address is invalid).
* emulate_io() now returns a positive value IOREQ_PENDING to indicate that the
request is sent to VHM. This mitigates a potential race between
dm_emulate_pio() and pio_instr_vmexit_handler() which can cause
emulate_pio_post() being called twice for the same request.
* Remove the ''processed'' member in io_request. Previously this mirrors the
state of the VHM request which terminates at either COMPLETE or FAILED. After
the FAILED state is removed, the terminal state will always be constantly
COMPLETE. Thus the mirrored ''processed'' member is no longer useful.
Note that emulate_instruction() will always succeed after a reshuffle, and this
patch takes that assumption in advance. This does not hurt as that returned
value is not currently handled.
This patch makes it explicit that I/O emulation is not expected to fail. One
issue remains, though, which occurs when a non-aligned cross-boundary access
happens. Currently the hypervisor, VHM and DM adopts different policy:
* Hypervisor: inject #GP if it detects that the access crossed boundary
* VHM: deliver to DM if the access does not complete falls in the range of a
client
* DM: a handler covering part of the to-be-accessed region is picked and
assertion failure can be triggered.
A high-level design covering all these components (in addition to instruction
emulation) is needed for this. Thus this patch does not yet cover the issue.
Tracked-On: #875
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
MISARC has requirements about Marco redefinition, usage of ++ or -- and
assignment operator in boolean expression. This patch is used to solve
these violations.
The modifications are summarized as following:
1.The HC_VM_SET_MEMORY_REGION, HC_VM_GPA2HPA, HC_VM_SET_MEMORY_REGIONS are
redefined twice in acrn_hv_des.h, so delete them to solve the macro
redefinition violations.
2.The macro BUS_LOCK are redefined in bits.h and atomic.h, then delete
the declaration in both two files, add a new declaration in cpu.h and
include the header file.
3.modify the code to solve the improper usage of -- operators in string.c.
4.modify the while loop to for loop to avoid assignment operator in
boolean expression in vlapic.c.
v1 -> v2:
*Modify the format of commit logs and signed-off name.
*Modify the code format from 'd = d-1;' to 'd--;' to be better.
Signed-off-by: Junjun Shan <junjun.shan@intel.com>
MISRA-C requires that shift operation cannot exceed the word length.
What this patch does:
- Add the pre condition for 'init_lapic' regarding to 'pcpu_id'
Currently, max 8 physical cpus are supported.
Re-design will be required if we would like to support more physical
cpus.
So, add the pre condition here to avoid the unintentional shift
operation mistakes.
- Replace the id type with uint8_t in 'vlapic_build_id'
- For VM0, it uses 'lapic_id' as its id, which is uint8_t.
- For non VM0, it uses 'vcpu_id' as its id, which is uint16_t.
Cast this id to uint8_t to make sure there is no loss of data after
left shifting 24U.
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The bracket is required when the level of precedence of
the operators is less than 13. Add the bracket to logical
conjunctions. The commit applys the rule to the files under
hypervisor/arch/x86/guest/*
Signed-off-by: Yang, Yu-chu <yu-chu.yang@intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
MISRAC requires that a switch statement shall contain a default clause.
This patch add the default clause and some comments for the ones
violated the rule.
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This patch add some comments after the default and before the break
in the switch statement based on MISRA-C requirement.
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
Originally, there is cross-references between instr_emul.h and instr_emul_wrapper.h.
User must include both of them when calling instruction emulation functions. This
will raise up some confusion and inconvenience.
So we rearrange the logic of instruction emulation code as following:
- External API -- defined in instr_emul.h
* decode_instruction(struct vcpu *vcpu)
* emulate_instruction(struct vcpu *vcpu)
- Make all other functions as static in instr_emul.c
- Remove instr_emul_wrapper.c/h
No functional change.
Signed-off-by: Kaige Fu <kaige.fu@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
there will be 3 types of vcpu runtime contexts:
- runtime contexts always saved/restored during VM exit/entry, which
include general registers rax/rcx/rdx/rbx/rbp/rsi/rdi/r8~r15, cr2 and
msr for spectre control (ia32_spec_ctrl)
- runtime contexts on-demand cached/updated during VM exit/entry, which
include frequently used registers rsp, rip, efer, rflags, cr0 and cr4
- runtime contexts always read/write from/to VMCS, which include left
registers not in above
this patch add get/set register APIs for vcpu runtime contexts, and unified
the save/restore method for them according to above description.
v3:
- update vcpu_get/set_cr0/4 as unified interface to get/set guest cr0/cr4,
use on-demand cache for reading, but always write to VMCS for writing.
v2:
- use reg_cached/reg_updated for on-demand runtime contexts
- always read/write cr3 from/to VMCS
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Fix the parameter name mismatch between API declaration and definition.
v2 -> v3:
* Fix two more violations which are missed in previous report.
shell_puts and console_write
v1 -> v2:
* Replace 'ret_desc' with 'desc'
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
Remove structure vm_attr
Wrap two APIs alloc_vm_id and free_vm_id
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Fix the parameter type mismatch between API declaration and definition.
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
For data structure types "enum vpic_wire_mode, struct stack_canary",
its name is identical with variable name in the same scope.
This MISRA C violation is detected by static analysis tool.
For variables "segment_override, pde_index", its name is identical
with function name. This MISRA C violation is detected.
Naming convention rule:Variable name can be shortened from
its data structure type name.
The following udpates are made:
enum vpic_wire_mode vpic_wire_mode-->enum vpic_wire_mode wire_mode
struct stack_canary stack_canary-->struct stack_canary stk_canary
uint8_t segment_override:1 --> uint8_t seg_override:1
uint32_t pde_index--> uint32_t pde_idx
V1-->V2:
Remove update "enum cpu_state cpu_state-->enum cpu_state state"
and "enum irqstate irqstate-->enum irq_ops_mode ops_mode", other
patch will cover it.
V2-->V3:
Update "uint32_t pde_index--> uint32_t pde_idx".
Signed-off-by: Xiangyang Wu <xiangyang.wu@linux.intel.com>
For some function pointer type, its name is identical with
variable name in the same scope. This MISRA C violation is
detected.
Naming convention rule:If the type is function
pointer, its name needs suffix "_fn".
The following udpates are made:
*apicv_set_intr_ready-->*apicv_set_intr_ready_fn
*apicv_pending_intr-->*apicv_pending_intr_fn
*apicv_set_tmr-->*apicv_set_tmr_fn
*apicv_batch_set_tmr-->*apicv_batch_set_tmr_fn
*apicv_intr_accepted-->*apicv_intr_accepted_fn
*apicv_post_intr-->*apicv_post_intr_fn
*enable_x2apic_mode-->*enable_x2apic_mode_fn
V1-->V2:
Update function pointer when it is used as calling
since no need to dereference a function pointer
before calling.
Signed-off-by: Xiangyang Wu <xiangyang.wu@linux.intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
Instead of using two members for maintaining the state of a VHM request, this
patch replaces the transitions with a single state. Basically the lifecycle of a
VHM request shall be:
FREE -> PENDING -> PROCESSING -> COMPLETE -> FREE -> ...
The structure header of vhm_request has more details of the transitions access
limitations under different states.
Also drop the set but unused member vcpu.ioreq_pending.
For backward-compatibility, the obsolete 'valid' member is still kept and
maintained before SOS and DM adapts to the new state transitions.
v2 -> v3:
* Use complete_ioreq to mark an I/O request finished in
dm_emulate_(pio|mmio)_post.
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
