Some passthrough devices require multiple MSI vectors, but don't
support MSI-X. In meanwhile, Linux kernel doesn't support continuous
vector allocation.
On native platform, this issue can be mitigated by IOMMU via interrupt
remapping. However, on ACRN, there is no vIOMMU.
vMSI-X on MSI emulation is one solution to mitigate this problem on ACRN.
This patch adds MSI-X emulation on MSI capability.
For the device needs to do MSI-X emulation, HV will hide MSI capability
and present MSI-X capability to guest.
The guest driver may need to modify to reqeust MSI-X vector.
For example:
ret = pci_alloc_irq_vectors(pdev, 1, STMMAC_MSI_VEC_MAX,
- PCI_IRQ_MSI);
+ PCI_IRQ_MSI | PCI_IRQ_MSIX);
To enable MSI-X emulation, the device should:
- 1. The device should be in vmsix_on_msi_devs array.
- 2. Support MSI, but don't support MSI-X.
- 3. MSI capability should support per-vector mask.
- 4. The device should have an unused BAR.
- 5. The device driver should not rely on PBA for functionality.
Tracked-On: #4831
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
For a ptirq_remapping_info entry, when build IRTE:
- If the caller provides a valid IRTE, use the IRET
- If the caller doesn't provide a valid IRTE, allocate a IRET when the
entry doesn't have a valid IRTE, in this case, the IRET will be freed
when free the entry.
Tracked-On:#4831
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Now Host Bridge and PCI Bridge could only be added to SOS's acrn_vm_pci_dev_config.
So For UOS, we always emualte Host Bridge and PCI Bridge for it and assign PCI device
to it; for SOS, if it's the highest severity VM, we will assign Host Bridge and PCI
Bridge to it directly, otherwise, we will emulate them same as UOS.
Tracked-On: #4550
Signed-off-by: Li Fei1 <fei1.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
According PCI Code and ID Assignment Specification Revision 1.11, a PCI device
whose Base Class is 06h and Sub-Class is 00h is a Host bridge.
Tracked-On: #4550
Signed-off-by: Li Fei1 <fei1.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Guest may write a MSI-X capability register with only RW bits setting on. This works
well on native since the hardware will make sure RO register bits could not over-write.
However, the software needs more efforts to achieve this. This patch does this by
defining a RW permission mapping base on bits. When a guest tries to write a MSI-X
Capability register, only modify the RW bits on vCFG space.
Tracked-On: #4550
Signed-off-by: Li Fei1 <fei1.li@intel.com>
Guest may write a MSI capability register with only RW bits setting on. This works
well on native since the hardware will make sure RO register bits could not over-write.
However, the software needs more efforts to achieve this. This patch does this by
defining a RW permission mapping base on bits. When a guest tries to write a MSI
Capability register, only modify the RW bits on vCFG space.
Tracked-On: #4550
Signed-off-by: Li Fei1 <fei1.li@intel.com>
There's no need to look up MSI ptirq entry by virtual SID any more since the MSI
ptirq entry would be removed before the device is assigned to a VM.
Now the logic of MSI interrupt remap could simplify as:
1. Add the MSI interrupt remap first;
2. If step is already done, just do the remap part.
Tracked-On: #4550
Signed-off-by: Li Fei1 <fei1.li@intel.com>
Acked-by: Eddie Dong<eddie.dong@Intel.com>
Reviewed-by: Grandhi, Sainath <sainath.grandhi@intel.com>
In commit 0a7770cb, we remove vm pointer in vpci structrue. So there's no need
for such pre-condition since vpci is embedded in vm structure. The vm can't be
NULL Once the vpci is not NULL.
Tracked-On: #4550
Signed-off-by: Li Fei1 <fei1.li@intel.com>
Acked-by: Eddie Dong<eddie.dong@Intel.com>
The existing code do separately for each VM when we deinit vpci of a VM. This is
not necessary. This patch use the common handling for all VMs: we first deassign
it from the (current) user, then give it back to its parent user.
When we deassign the vdev from the (current) user, we would de-initialize the
vMSI/VMSI-X remapping, so does the vMSI/vMSI-X data structure.
Tracked-On: #4550
Signed-off-by: Li Fei1 <fei1.li@intel.com>
Acked-by: Eddie Dong<eddie.dong@Intel.com>
Now we could know a device status by 'user' filed, like
---------------------------------------------------------------------------
| NULL | == vdev | != NULL && != vdev
vdev->user | device is de-init | used by itself VM | assigned to another VM
---------------------------------------------------------------------------
So we don't need to modify 'vpci' field accordingly.
Tracked-On: #4550
Signed-off-by: Li Fei1 <fei1.li@intel.com>
Acked-by: Eddie Dong<eddie.dong@Intel.com>
Add a new field 'parent_user' to record the parent user of the vdev. And refine
'new_owner' to 'user' to record who is the current user of the vdev. Like
-----------------------------------------------------------------------------------------------
vdev in | HV | pre-VM | SOS | post-VM
| | |vdev used by SOS|vdev used by post-VM|
-----------------------------------------------------------------------------------------------
parent_user| NULL(HV) | NULL(HV) | NULL(HV) | NULL(HV) | vdev in SOS
-----------------------------------------------------------------------------------------------
user | vdev in HV | vdev in pre-VM | vdev in SOS | vdev in post-VM | vdev in post-VM
-----------------------------------------------------------------------------------------------
Tracked-On: #4550
Signed-off-by: Li Fei1 <fei1.li@intel.com>
Acked-by: Eddie Dong<eddie.dong@Intel.com>
The virtual MSI information could be included in ptirq_remapping_info structrue,
there's no need to pass another input paramater for this puepose. So we could
remove the ptirq_msi_info input.
Tracked-On: #4550
Signed-off-by: Li Fei1 <fei1.li@intel.com>
Most code in the if ... else is duplicated. We could put it out of the
conditional statement.
Tracked-On: #4550
Signed-off-by: Li Fei1 <fei1.li@intel.com>
Conceptually, the devices unregistration sequence of the shutdown process should be
opposite to create.
Tracked-On: #4550
Signed-off-by: Li Fei1 <fei1.li@intel.com>
We could use container_of to get vm structure pointer from vpic. So vm
structure pointer is no need in vpic structure.
Tracked-On: #4550
Signed-off-by: Li Fei1 <fei1.li@intel.com>
We could use container_of to get vm structure pointer from vpci. So vm
structure pointer is no need in vpci structure.
Tracked-On: #4550
Signed-off-by: Li Fei1 <fei1.li@intel.com>
For SOS VM, when the target platform has multiple IO-APICs, there
should be equal number of virtual IO-APICs.
This patch adds support for emulating multiple vIOAPICs per VM.
Tracked-On: #4151
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Acked-by: Eddie Dong <eddie.dong@Intel.com>
As ACRN prepares to support platforms with multiple IO-APICs,
GSI is a better way to represent physical and virtual INTx interrupt
source.
1) This patch replaces usage of "pin" with "gsi" whereever applicable
across the modules.
2) PIC pin to gsi is trickier and needs to consider the usage of
"Interrupt Source Override" structure in ACPI for the corresponding VM.
Tracked-On: #4151
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Acked-by: Eddie Dong <eddie.dong@Intel.com>
Changes the mmio handler data from that of the acrn_vm struct to
the acrn_vioapic.
Add nr_pins and base_addr to the acrn_vioapic data structure.
Tracked-On: #4151
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Acked-by: Eddie Dong <eddie.dong@Intel.com>
Reverts 538ba08c: hv:Add vpin to ptdev entry mapping for vpic/vioapic
ACRN uses an array of size per VM to store ptirq entries against the vIOAPIC pin
and an array of size per VM to store ptirq entries against the vPIC pin.
This is done to speed up "ptirq entry" lookup at runtime for Level triggered
interrupts in API ptirq_intx_ack used on EOI.
This patch switches the lookup API for INTx interrupts to the API,
ptirq_lookup_entry_by_sid
This could add delay to processing EOI for Level triggered interrupts.
Trade-off here is space saved for array/s of size CONFIG_MAX_IOAPIC_LINES with 8 bytes
per data. On a server platform, ACRN needs to emulate multiple vIOAPICs for
SOS VM, same as the number of physical IO-APICs. Thereby ACRN would need around
10 such arrays per VM.
Removes the need of "pic_pin" except for the APIs facing the hypercalls
hcall_set_ptdev_intr_info, hcall_reset_ptdev_intr_info
Tracked-On: #4151
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Acked-by: Eddie Dong <eddie.dong@Intel.com>
There're some PCI devices need special handler for vendor-specical feature or
capability CFG access. The Intel GPU is one of them. In order to keep the ACRN-HV
clean, we want to throw the qurik part of PCI CFG asccess to DM to handle.
To achieve this, we implement per-device policy base on whether it needs quirk handler
for a VM: each device could configure as "quirk pass through device" or not. For a
"quirk pass through device", we will handle the general part in HV and the quirk part
in DM. For a non "quirk pass through device", we will handle all the part in HV.
Tracked-On: #4371
Signed-off-by: Li Fei1 <fei1.li@intel.com>
There're some cases the SOS (higher severity guest) needs to access the
post-launched VM (lower severity guest) PCI CFG space:
1. The SR-IOV PF needs to reset the VF
2. Some pass through device still need DM to handle some quirk.
In the case a device is assigned to a UOS and is not in a zombie state, the SOS
is able to access, if and only if the SOS has higher severity than the UOS.
Tracked-On: #4371
Signed-off-by: Li Fei1 <fei1.li@intel.com>
To avoid information leakage, we need to ensure that the device is
inaccessble when it does not exist.
For SR-IOV disabled VF device, we have the following operations.
1. The configuration space accessing will get 0xFFFFFFFF as a
return value after set the device state to zombie.
2. The BAR MMIO EPT mapping are removed, the accesssing causes
EPT violation.
3. The device will be detached from IOMMU.
4. The IRQ pin and vector are released.
Tracked-On: #4433
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
change vmsi_read_cfg to read_vmsi_cfg, same applies to writing
change vmsix_read_cfg to read_vmsix_cfg, same applies to writing
Tracked-On: #4433
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
In order to add GVT-D support, we need pass through stolen memory and opregion memroy
to the post-launched VM. To implement this, we first reserve the GPA for stolen memory
and opregion memory through post-launched VM e820 table. Then we would build EPT mapping
between the GPA and the stolen memory and opregion memory real HPA. The last, we need to
return the GPA to post-launched VM if it wants to read the stolen memory and opregion
memory address and prevent post-launched VM to write the stolen memory and opregion memory
address register for now.
We do the GPA reserve and GPA to HPA EPT mapping in ACRN-DM and the stolen memory and
opregion memory CFG space register access emulation in ACRN-HV.
Tracked-On: #4371
Signed-off-by: Li Fei1 <fei1.li@intel.com>
VM needs to check if it owns this device before deiniting it.
Tracked-On: #4433
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Change enable_vf/disable_vf to create_vfs/disable_vfs
Change base member of pci_vbar to base_gpa
Tracked-On: #4433
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The vf_bdf is not initialized when invoking pci_pdev_read_cfg function.
Tracked-On: #4433
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
We didn't support SR-IOV capability of PF in UOS for now, we should
hide the SR-IOV capability if we pass through the PF to a UOS.
For now, we don't support assignment of PF to a UOS.
Tracked-On: #4433
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@Intel.com>
Emulate Device ID, Vendor ID and MSE(Memory Space Enable) bit in
configuration space for an assigned VF, initialize assgined VF Bars.
The Device ID comes from PF's SRIOV capability
The Vendor ID comes from PF's Vendor ID
The PCI MSE bit always be set when VM reads from an assigned VF.
Tracked-On: #4433
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
If a VF instance is disabled, we didn’t remove the vdev instance,
only set the vdev as a zombie vdev instance, indicating that it
cannot be accessed anymore.
Tracked-On: #4433
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Change name find_vdev to find_available_vdev and add comments
Tracked-On: #4433
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The VF BARs are initialized by its PF SRIOV capability
Tracked-On: #4433
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Refine coding style to wrap msix map/unmap operations, clean up repeated
assignments for msix mmio_hpa and mmio_size.
Tracked-On: #4433
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Add _v prefix for some function name to indicate this function wants to operate
on virtual CFG space or virtual BAR register.
Tracked-On: #4371
Signed-off-by: Li Fei1 <fei1.li@intel.com>
Removed the pci_vdev_write_cfg_u8/u16/u32 APIs and only used
pci_vdev_write_cfg as the API for writing vdev's cfgdata
Tracked-On: #4433
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Add cfg_header_read_cfg and cfg_header_write_cfg to handle the 1st 64B
CFG Space header PCI configuration space.
Only Command and Status Registers are pass through;
Only Command and Status Registers and Base Address Registers are writable.
In order to implement this, we add two type bit mask for per 4B register:
pass through mask and read-only mask. When pass through bit mask is set, this
means this bit of this 4B register is pass through, otherwise, it is virtualized;
When read-only mask is set, this means this bit of this 4B register is read-only,
otherwise, it's writable. We should write it to physical CFG space or virtual
CFG space base on whether the pass through bit mask is set or not.
Tracked-On: #4371
Signed-off-by: Li Fei1 <fei1.li@intel.com>
1. Renames DEFINE_IOAPIC_SID with DEFINE_INTX_SID as the virtual source can
be IOAPIC or PIC
2. Rename the src member of source_id.intx_id to ctlr to indicate interrupt
controller
2. Changes the type of src member of source_id.intx_id from uint32_t to
enum with INTX_CTLR_IOAPIC and INTX_CTLR_PIC
Tracked-On: #4447
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
for vpci_bridge it is better just write the virtual configure space,
so move out the PCI bridge phyiscal cfg write to pci.c
also add some rules in config pci bridge.
Tracked-On: #3381
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
reduce the use of similar APIs (particularly the name confusion) for
CFG space read/write.
Tracked-On: #4433
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Make the name of the functions more accurate
Tracked-On: #4433
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
create new pdev and vdev structures for a SRIOV VF device initialization
Tracked-On: #4433
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Add a new parameter pf_vdev for function vpci_init_vdev to support SRIOV
VF vdev initializaiton.
Tracked-On: #4433
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
All SRIOV VF physical devices don't have bars in configuration space,
they are from the VF associated PF's VF_BAR registers of SRIOV capability.
Adding a vbars data structure in pci_cap_sriov data structure to store
SRIOV VF_BAR information, so that each VF bars can be initialized directly
through the vbars instead multiple accessing of the PF VF_BAR registers.
Tracked-On: #4433
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
To support SRIOV capability initialization, add a new parameter
is_sriov_pf_vdev for init_vdev_pt function.
If parameter is_sriov_pf_vdev of function init_vdev_pt is true,
then function init_vdev_pt initializes the vdev's SRIOV capability.
Tracked-On: #4433
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
VF_ENABLE is one field of SRIOV capability that is used to create
or remove VF physical devices. If VF_ENABLE is set, hv can detect
if the VF physical devices are ready after waiting 100 ms.
v2: Add sanity check for writing NumVFs register, add precondition
and application constraints when VF_ENABLE is set and refine
code style.
Tracked-On: #4433
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Introduce SRIOV capability field for pci_vdev and add SRIOV capability
interception entries.
Tracked-On: #4433
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
add vpci bridge operations in hypervisor, to avoid SOS mis-operations
to affect other VM's PCI devices.
assumption: before hypervisor bootup, the physical pci-bridge shall be
configured correctly by BIOS or other bootloader; for ACS (Access
Control Service) capability, it is configured by BIOS to support the
devices under it to be isolated and allocated to different VMs.
to simplify the emulations of vpci bridge, set limitations as following:
1. expose all configure space registers, but readonly
2. BIST not support; by default is 0
3. not support interrupt, including INTx and MSI.
TODO:
1. configure tool can select whether a PCI bridge is emulated or pass
through.
Open:
1. SOS how to reset PCI device under the PCI bridge?
Tracked-On: #3381
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Acked-by: Eddie Dong <eddie.dong@Intel.com>
1. Rename BOOT_CPU_ID to BSP_CPU_ID
2. Repace hardcoded value with BSP_CPU_ID when
ID of BSP is referenced.
Tracked-On: #4420
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Now only PCI MSI-X BAR access need dynamic register/unregister. Others don't need
unregister once it's registered. So we don't need to lock the vm level emul_mmio_lock
when we handle the MMIO access. Instead, we could use finer granularity lock in the
handler to ptotest the shared resource.
This patch fixed the dead lock issue when OVMF try to size the BAR size:
Becasue OVMF use ECAM to access the PCI configuration space, it will first hold vm
emul_mmio_lock, then calls vpci_handle_mmconfig_access. While this tries to size a
BAR which is also a MSI-X Table BAR, it will call register_mmio_emulation_handler to
register the MSI-X Table BAR MMIO access handler. This will causes the emul_mmio_lock
dead lock.
Tracked-On: #3475
Signed-off-by: Li Fei1 <fei1.li@intel.com>
Now we split passthrough PCI device from DM to HV, we could remove all the passthrough
PCI device unused code.
Tracked-On: #4371
Signed-off-by: Li Fei1 <fei1.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
In this case, we could handle all the passthrough PCI devices in ACRN hypervisor.
But we still need DM to initialize BAR resources and Intx for passthrough PCI
device for post-launched VM since these informations should been filled into
ACPI tables. So
1. we add a HC vm_assign_pcidev to pass the extra informations to replace the old
vm_assign_ptdev.
2. we saso remove HC vm_set_ptdev_msix_info since it could been setted by the post-launched
VM now same as SOS.
3. remove vm_map_ptdev_mmio call for PTDev in DM since ACRN hypervisor will handle these
BAR access.
4. the most important thing is to trap PCI configure space access for PTDev in HV for
post-launched VM and bypass the virtual PCI device configure space access to DM.
This patch doesn't do the clean work. Will do it in the next patch.
Tracked-On: #4371
Signed-off-by: Li Fei1 <fei1.li@intel.com>
Add assign/deassign PCI device hypercall APIs to assign a PCI device from SOS to
post-launched VM or deassign a PCI device from post-launched VM to SOS. This patch
is prepared for spliting passthrough PCI device from DM to HV.
The old assign/deassign ptdev APIs will be discarded.
Tracked-On: #4371
Signed-off-by: Li Fei1 <fei1.li@intel.com>
1. Align the coding style for these MACROs
2. Align the values of fixed VECTORs
Tracked-On: #4348
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
is_polling_ioreq is more straightforward. Rename it.
Tracked-On: #4329
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This patch checks the validity of 'vdev->pdev' to
ensure physical device is linked to 'vdev'.
this check is to avoid some potential hypervisor
crash when destroying VM with crafted input.
Tracked-On: #4336
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Reviewed-by: Fei Li <fei1.li@intel.com>
SOS will use PCIe ECAM access PCIe external configuration space. HV should trap this
access for security(Now pre-launched VM doesn't want to support PCI ECAM; post-launched
VM trap PCIe ECAM access in DM).
Besides, update PCIe MMCONFIG region to be owned by hypervisor and expose and pass through
platform hide PCI devices by BIOS to SOS.
Tracked-On: #3475
Signed-off-by: Li Fei1 <fei1.li@intel.com>
Introduce two kinds of events for each vcpu,
VCPU_EVENT_IOREQ: for vcpu waiting for IO request completion
VCPU_EVENT_VIRTUAL_INTERRUPT: for vcpu waiting for virtual interrupts events
vcpu can wait for such events, and resume to run when the
event get signalled.
This patch also change IO request waiting/notifying to this way.
Tracked-On: #4329
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Before we assign a PT device to post-launched VM, we should reset the PCI device
first. However, ACRN hypervisor doesn't plan to support PCIe hot-plug and doesn't
support PCIe bridge Secondary Bus Reset. So the PT device must support FLR or PM
reset. This patch do this check when assigning a PT device to post-launched VM.
Tracked-On: #3465
Signed-off-by: Li Fei1 <fei1.li@intel.com>
Since we restore BAR values when writing Command Register if necessary. We don't
need to trap FLR and do the BAR restore then.
Tracked-On: #3475
Signed-off-by: Li Fei1 <fei1.li@intel.com>
When PCIe does Conventinal Reset or FLR, almost PCIe configurations and states will
lost. So we should save the configurations and states before do the reset and restore
them after the reset. This was done well by BIOS or Guest now. However, ACRN will trap
these access and handle them properly for security. Almost of these configurations and
states will be written to physical configuration space at last except for BAR values
for now. So we should do the restore for BAR values. One way is to do restore after
one type reset is detected. This will be too complex. Another way is to do the restore
when BIOS or guest tries to write the Command Register. This could work because:
1. The I/O Space Enable bit and Memory Space Enable bits in Command Register will reset
to zero.
2. Before BIOS or guest wants to enable these bits, the BAR couldn't be accessed.
3. So we could restore the BAR values before enable these bits if reset is detected.
Tracked-On: #3475
Signed-off-by: Li Fei1 <fei1.li@intel.com>
- target vm_id of vuart can't be un-defined VM, nor the VM itself.
- fix potential NULL pointer dereference in find_active_target_vuart()
Tracked-On: #3854
Signed-off-by: Zide Chen <zide.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Structure pci_vbar is used to define the virtual BAR rather than physical BAR.
It's better to name as pci_vbar.
Tracked-On: #3475
Signed-off-by: Li Fei1 <fei1.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
ACRN hypervisor should trap guest doing PCI AF FLR. Besides, it should save some status
before doing the FLR and restore them later, only BARs values for now.
This patch will trap guest Conventional PCI Advanced Features Control Register write
operation if the device supports Conventional PCI Advanced Features Capability and
check whether it wants to do device AF FLR. If it does, call pdev_do_flr to do the job.
Tracked-On: #3465
Signed-off-by: Li Fei1 <fei1.li@intel.com>
ACRN hypervisor should trap guest doing PCIe FLR. Besides, it should save some status
before doing the FLR and restore them later, only BARs values for now.
This patch will trap guest Device Capabilities Register write operation if the device
supports PCI Express Capability and check whether it wants to do device FLR. If it does,
call pdev_do_flr to do the job.
Tracked-On: #3465
Signed-off-by: Li Fei1 <fei1.li@intel.com>
Do vMSI-X remap only when Mask Bit in Vector Control Register for MSI-X Table Entry
is unmask.
The previous implementation also has two issues:
1. It only check whether Message Control Register for MSI-X has been modified when
guest writes MSI-X CFG space at Message Control Register offset.
2. It doesn't really disable MSI-X when guest wants to disable MSI-X.
Tracked-On: #3475
Signed-off-by: Li Fei1 <fei1.li@intel.com>
1. disable physical MSI before writing the virtual MSI CFG space
2. do the remap_vmsi if the guest wants to enable MSI or update MSI address or data
3. disable INTx and enable MSI after step 2.
The previous Message Control check depends on the guest write MSI Message Control
Register at the offset of Message Control Register. However, the guest could access
this register at the offset of MSI Capability ID register. This patch remove this
constraint. Also, The previous implementation didn't really disable MSI when guest
wanted to disable MSI.
Tracked-On: #3475
Signed-off-by: Li Fei1 <fei1.li@intel.com>
Now, we support schedule inplace. And with cpu sharing, there might be
multi vcpu running on same pcpu. Reschedule request will happen when
switch the running vcpu. If the current vcpu is polling on the IO
completion, it need to be scheduled back to the polling point.
In the polling path, construct a loop for polling, and do schedule in the
loop if needed.
Tracked-On: #4178
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Name vmsi and vmsix function with verb-object style:
For external APIs, using MODULE_NAME_verb-object style;
For internal APIs, using verb-object style.
Tracked-On: #3475
Signed-off-by: Li Fei1 <fei1.li@intel.com>
ptirq_msix_remap doesn't do the real remap, that's the vmsi_remap and vmsix_remap_entry
does. ptirq_msix_remap only did the preparation.
Tracked-On: #3475
Signed-off-by: Li Fei1 <fei1.li@intel.com>
call vuart_register_io_handler function, when the parameter vuart_idx is greater
than or equal to 2, print the vuart index value which will not register the vuart.
Tracked-On: #4072
Signed-off-by: Jidong Xia <xiajidong@cmss.chinamobile.com>
After reshuffle pci_bar structrue we could write ~0U not BAR size mask to BAR
configuration space directly when do BAR sizing. In this case, we could know whether
the value in BAR configuration space is a valid base address. As a result, we could
do BAR re-programming whenever we want.
Tracked-On: #3475
Signed-off-by: Li Fei1 <fei1.li@intel.com>
The current code declare pci_bar structure following the PCI bar spec. However,
we could not tell whether the value in virtual BAR configuration space is valid
base address base on current pci_bar structure. We need to add more fields which
are duplicated instances of the vBAR information. Basides these fields which will
added, bar_base_mapped is another duplicated instance of the vBAR information.
This patch try to reshuffle the pci_bar structure to declare pci_bar structure
following the software implement benefit not the PCI bar spec.
Tracked-On: #3475
Signed-off-by: Li Fei1 <fei1.li@intel.com>
The current do PCI IO BAR remap in vdev_pt_allow_io_vbar. This patch split this
function into vdev_pt_deny_io_vbar and vdev_pt_allow_io_vbar. vdev_pt_deny_io_vbar
removes the old IO port mapping, vdev_pt_allow_io_vbar add the new IO port mapping.
Tracked-On: #3475
Signed-off-by: Li Fei1 <fei1.li@intel.com>
After adding PCI BAR remap support, mmio_node may unregister when there's others
access it. This patch add a lock to protect mmio_node access.
Tracked-On: #3475
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Concurrent access on PCI device may happened if UOS try to access PCI configuration
space on different vCPUs through IO port. This patch just adds a global PCI lock for
each VM to prevent the concurrent access.
Tracked-On: #3475
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Refine PCI CONFIG_ADDRESS Register definition as its physical layout.
In this case, we could read/write PCI CONFIG_ADDRESS Register atomically.
Tracked-On: #3475
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Unmap old mappings in vdev_pt_write_vbar explicitly before set_vbar_base.
Then map new mappings explicitly in vdev_pt_write_vbar.
Tracked-On: #3475
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Since guest could re-program PCI device MSI-X table BAR, we should add mmio
emulation handler unregister.
However, after add unregister_mmio_emulation_handler API, emul_mmio_regions
is no longer accurate. Just replace it with max_emul_mmio_regions which records
the max index of the emul_mmio_node.
Tracked-On: #3475
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
In theory, guest could re-program PCI BAR address to any address. However, ACRN
hypervisor only support [0, top_address_space) EPT memory mapping. So we need to
check whether the PCI BAR re-program address is within this scope.
Tracked-On: #3475
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
- The default behaviors of PIO & MMIO handlers are same
for all VMs, no need to expose dedicated APIs to register
default hanlders for SOS and prelaunched VM.
Tracked-On: #3904
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
'info.pmsi_addr' may be written to physicall device's
PCI configuration field without initialization when
'enable' is false in 'vmsi_remap()'.
this patch is to fix above issues, 'PCIR_MSI_ADDR'
and 'PCIR_MSI_ADDR_HIGH' only be programmed when
'enable' is true.
Tracked-On: #3903
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
With cpu sharing enabled, we will map acrn_vcpu to thread_object
in scheduling. From modulization perspective, we'd better hide the
pcpu_id in acrn_vcpu and move it to thread_object.
Tracked-On: #3813
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Signed-off-by: Yu Wang <yu1.wang@intel.com>
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
--remove unnecessary includes
--remove unnecssary forward-declaration for 'struct vhm_request'
Tracked-On: #861
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
The MSI Message Address and Message Data have no valid data after Power-ON. So
there's no need to initialize them by reading the data from physical PCI configuration
space.
Tracked-On: #3475
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
- update the function argument type to union
Declaring argument as pointer is not necessary since it
only does the comparison.
Tracked-On: #1842
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Initialize vBAR configure space when doing vPCI BAR initialization. At this time,
we access the physical device as we needs, no need to cache physical PCI device
BAR information beforehand.
Tracked-On: #3475
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
The orignal communication port will lose data when tx is too fast, and
the data in FIFO will be overwritten.
Now, when the FIFO is full, stop sending more data. When the FIFO is not
full, notify the vuart to send more data.
Tracked-On: #3681
Signed-off-by: Conghui Chen <conghui.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
For communication vuart, when it send data to target vuart's fifo, it
should meet the conditions:
1. MCR_LOOPBACK is not set
2. LCR_DLAB is not set
3. access reg is UART16550_THR
4. target_vu is not null
But the LCR_DLAB is missed now, and when vuart set it's UART16550_DLL,
it will be send to target by mistake as UART16550_DLL = UART16550_THR.
Add the missed condition.
DLAB in uart16550 spec:
Divisor Latch Access Bit.
1 = Allows access to the Divisor Latch Registers and reading of the FIFO
Control Register.
0 = Allows access to RBR, THR, IER and IIR registers.
Tracked-On: #3681
Signed-off-by: Conghui Chen <conghui.chen@intel.com>
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Eddie Dong <eddie.dong@Intel.com>
In "commit 6ebc22" the vPCI device initialize sequence is wrong changed. This patch
tries to revert it.
Tracked-On: #3475
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
In "commit 90480d" we use a pointer new_owner to point to the actual vPCI device
for post-launched VM when this device is assigned to this post-launched VM from
SOS. However, now DM will use SOS's vmsix_table_mmio_access_handler to trap vMSI-X
table mmio access for post-launched VM. So we should use the post-launched VM's
vPCI device in this case.
Tracked-On: #3475
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
vPCI device should use its virtual configure space to access its BAR after vPCI
device initialized.
This patch also remove corner case "vPCI device will use its 64 bits BAR high idx
to access its BAR base address".
Tracked-On: #3475
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
