remove the usage of HV_DEBUG in vioapic.c
Tracked-On: #861
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Now if the vmexit reason is virtulized EOI for level triggered
interrupts, HV will loop all the ptdev entries, it is time-consuming,
this patch add vpin to ptdev entry mapping for vpic and vioapic
when add intx entry for a vm,it can use the ptdev entry directly
according to the mapping for vpin and ptdev entry when EOI vmexit.
v3-->v4:
-- add check vpin in remove_intx_remapping
-- move check vpin from ptdev_add_intx_remapping to add_intx_remapping
Tracked-On: #861
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Reviewed-by: Binbin Wu <binbin.wu@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
The guest could write the MSI-X Table fields in DWORD or QWORD. For
example the Message Address could be a QWORD write or two DWORD writes,
the Message Data could be a DWORD write or part of a QWORD write that
is combined with the Vector Control. This patch captures all the
possible combinations when the guest is configuring the MSI-X Table.
Tracked-On: #1568
Signed-off-by: Zide Chen <zide.chen@intel.com>
Reviewed-by: Li, Fei1 <fei1.li@intel.com>
Though guests are not supposed to read Message Data/Addr, it's still better
off to initialize them to 0.
vector_control should be initialize to zero besides the mask bit.
Tracked-On: #1568
Signed-off-by: Zide Chen <zide.chen@intel.com>
Reviewed-by: Li, Fei1 <fei1.li@intel.com>
- in vmsix_cfgwrite(), it should write the new value 'val'.
- in vmsix_table_mmio_access_handler(), mmio_gpa is a typo for intercepted_gpa.
Tracked-On: #1568
Signed-off-by: Zide Chen <zide.chen@intel.com>
Reviewed-by: Li, Fei1 <fei1.li@intel.com>
Revert the temporary workaround of calling allow_guest_pio_access() to
reset the I/O bitmap for CF9.
For CONFIG_ADDR register, only intercept I/O port CF8 to achieve these:
- In SOS, I/O bitmap for port CF9 is not set.
- In UOS or in partition mode, I/O requests to CF9/CFA/CFB won't be handled
by pci_cfgaddr_io_read/write() any more.
Tracked-On: #1815
Signed-off-by: Zide Chen <zide.chen@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Register separate I/O emulation handlers for I/O port CF8 and CFC. This
makes the code simpler, and offers some flexibilities to be able to handle
CF8 and CFC ports differently.
Tracked-On: #1815
Signed-off-by: Zide Chen <zide.chen@intel.com>
Reviewed-by: Li, Fei1 <fei1.li@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
MISRA-C requires that the function call in which the returned
value is discarded shall be clearly indicated using (void).
This patch fixes the violations related to the following
function calls.
- instr_check_gva
- vlapic_set_local_intr
- prepare_vm
- enter_s3
- emulate_instruction
- ptdev_intx_pin_remap
- register_mmio_emulation_handler
v1 -> v2:
* discard the return value of enter_s3
Tracked-On: #861
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
This patch addes missing brackets for 'if/else' statements based on
MISRA-C requirements 12 S.
Tracked-On: #861
Signed-off-by: Zide Chen <zide.chen@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Reviewed-by: Huihuang Shi <huihuang.shi@intel.com>
576S: Function pointer is of wrong type. C90 requires the elements of an
designated initializer to appear in a fixed order, the same as the order of
declaration. C99 relaxes this rule but seems MISRA-C sticks to C90 in this
regard.
Tracked-On: #861
Signed-off-by: Zide Chen <zide.chen@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Reviewed-by: Huihuang Shi <huihuang.shi@intel.com>
- 331S: Literal value requires a U suffix.
- 612S: inline function should be declared static.
- 93S: Value is not of appropriate type. MISRA-C imposes strict type
checking: no comparison between signed and unsigned, etc.
Tracked-On: #861
Signed-off-by: Zide Chen <zide.chen@intel.com>
Reviewed-by: Huihuang Shi <huihuang.shi@intel.com>
458S: Implicit conversion: actual to formal param (MR): "The value of an
actual parameter shall not be implicitly converted to the type of a formal
parameter, if that conversion might result in the loss of information".
Tracked-On: #861
Signed-off-by: Zide Chen <zide.chen@intel.com>
Reviewed-by: Huihuang Shi <huihuang.shi@intel.com>
Functions shall not call themselves, either directly or indirectly.
vpic_set_pinstate will cal vpic_notify_intr and results to recursion
violations,fix it out by mov vpic_notify_intr out of vpic_set_pinstate.
Tracked-On: #861
Signed-off-by: Huihuang Shi <huihuang.shi@intel.com>
reviewed-by: Junjie Mao <junjie.mao@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Assign function pointer without the unary & operator.
Take 'register_io_emulation_handler' as an example:
void register_io_emulation_handler(struct acrn_vm *vm,
const struct vm_io_range *range,
io_read_fn_t io_read_fn_ptr,
io_write_fn_t io_write_fn_ptr)
The last two parameters are function pointer.
Sometimes we use function designator directly, while sometimes
with the unary & operator, as shown below.
- without &
register_io_emulation_handler(vm, &range, vuart_read, vuart_write);
- with &
register_io_emulation_handler(vm, &pci_cfg_range,
&pci_cfg_io_read, &pci_cfg_io_write);
To unify the coding style, we will go with the first way.
Tracked-On: #861
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
-- Config MAX_EMULATED_MMIO_REGIONS 16 in Kconfig
-- Add emulated mmio array and emulated mmio regions
in vm structure
-- Remove mmio list in vm structure
-- Remove unregister_mmio_emulation_handler and
vioapic_cleanup APIs
Tracked-On: #861
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
-- Add emulated port io index
-- Add emulated pio array in vm structure
-- Remove port list in vm structure
-- Remove free_io_emulation_resource/register_io_handler/
create_io_handler APIs
v2-->v3:
-- not add 'is_emulated', check len == 0U
-- Check if io_read/io_write handler is NULL before calling
-- Replace ENUM with MACRO for emulated pio index to avoid
MISRA-C violations
v1-->v2:
-- Remove EMUL_PIO_NUM in Kconfig, add emulated pio index
for PIC/PCI/UART/RTC/PM
Tracked-On: #861
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
MISRA-C requires that the controlling expression of an if statement or
an iteration-statement shall be Boolean type.
v1 -> v2:
* update the U suffix of constant to let the type of operands
to bit operations (&) is the same.
* update the type of 'i' from uint64_t to uint16_t in
'profiling_set_control' since it is limited by phys_cpu_num,
which is uint16_t.
Tracked-On: #861
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
For data structure types "struct vm", its name is identical
with variable name in the same scope. This is a MISRA C violation.
Naming convention rule:If the data structure type is used by multi
modules, its corresponding logic resource is exposed to external
components (such as SOS, UOS), and its name meaning is simplistic
(such as vcpu, vm), its name needs prefix "acrn_".
The following udpates are made:
struct vm *vm-->struct acrn_vm *vm
Tracked-On: #861
Signed-off-by: Xiangyang Wu <xiangyang.wu@linux.intel.com>
For data structure types "struct vcpu", its name is identical
with variable name in the same scope. This is a MISRA C violation.
Naming convention rule:If the data structure type is used by multi
modules, its corresponding logic resource is exposed to external
components (such as SOS, UOS), and its name meaning is simplistic
(such as vcpu, vm), its name needs prefix "acrn_".
The following udpates are made:
struct vcpu *vcpu-->struct acrn_vcpu *vcpu
Tracked-On: #861
Signed-off-by: Xiangyang Wu <xiangyang.wu@linux.intel.com>
Currently vpci treats IO port CF9 as a regular PCI CONFIG_ADDRESS port,
so that SOS can't do system reboot through port CF9.
This patch handles port CF9 in this way:
- SOS (vm0): it is allowed to actually access the physical IO port for byte
accesses.
- UOS (non-vm0) or partitioning guests: any accesses to port CF9 are
ignored.
Tracked-On: #1568
Signed-off-by: Zide Chen zide.chen@intel.com
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
MMIO registers might be changed at any time.
The changes might not be catched due to compiler optimization
if there is no 'volatile' keyword.
We have defined MMIO read/write APIs to address the above issue.
'volatile' keyword is being used in these defined MMIO read/write
APIs.
This patch updates the MMIO registers access implementation in
'msix.c' to use these defined MMIO read/write APIs.
v1 -> v2:
* update the algorithm to get the address of high 32-bit of
'pentry->addr'
- previous way:
&(pentry->addr) + 4U
===> &(pentry->addr) + 4 * 64 bits
since 'pentry->addr' is 64 bits
- new way:
(char *)&(pentry->addr) + 4U
===> &(pentry->addr) + 4 * 8 bits
since 'char' is 8 bits
Tracked-On: #1711
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Replace dynamic memory allocation in memory management with static memory allocation.
Since the static memory allocation can guarantee the allocation never failed, so
split_large_page and construct_pgentry don't need to return a errno any more.
Besides, the destroy_ept don't need to free page any more. Instead, it would memset
the eptp to 0 to make sure we can't walk this paging table again.
Tracked-On: #861
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
add size check for other hypervisor console command;
they could be overflow for shell log buffer output.
Tracked-On: #1587
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
After enabling vPCI in hypervisor for vm0, UOS may not able be launched
successfully. Consider this scenario (take MSI-X for example):
- DM makes hypercall to hypervisor to do MSI-X remapping on behalf of
UOS guests.
- After the hypercall, VHM module in SOS kernel updates the physical
MSI-X table with the physical Message Data/Addr.
- These MMIO write requests are intercepted by hypervisor, which will
call ptdev_msix_remap() to do MSI-S remapping.
It may fail due to 2 possible reasons:
1) wrong target VM because:
hypervisor thinks it's a VM0 MSI-X device but they have been registered
as UOS guests through HC_SET_PTDEV_INTR_INFO hypercall.
2) wrong ptdev_msi_info->vmsi_data because:
The virtual MSI-X table is supposed to hold virtual Message data/addr
but the SOS VHM writes the physical ones to it.
This patch resolves these problems by ignoring the HC_VM_PCI_MSIX_REMAP
hypercall, so virtual and physical Message Data are the same from SOS'
perspective and it won't mess up the virtual PCI device in HV.
Also in HC_SET_PTDEV_INTR_INFO handler, vpci updates the target VM
when the PCI devices are assigned to different VMs.
The UOS' MSI/MSI-X remapping is triggered by hypervisor when SOS (either
DM or VHM) updates the Message Data/Addr.
Tracked-On: #1568
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Signed-off-by: Zide Chen <zide.chen@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
If PBA or other data structures reside in the same BAR with MSI-X,
devicemodel could emulate them and make hypercall SET_MEMORY_REGION
to setup EPT for vm0.
Hypervisor can not intercept the whole range of this BAR, but only
the minimum 4KB pages that cover the MSI-X Table.
Tracked-On: #1568
Signed-off-by: Zide Chen <zide.chen@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Some PCI devices can not accept DWORD write to the MSI-X Table though
PCI Spec allows it:
PCI Spec 3.0 6.8.3.2 MSI-X Configuration: Specifically, software is
always permitted to fill in the Message Address and Message Upper Address
fields with a single QWORD write.
Tracked-On: #1568
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Fixed the following violations:
- Widening cast on complex integer expression
- Casting operation to a pointer
- Static procedure is not explicitly called in code analysed
Tracked-On: #1568
Signed-off-by: Zide Chen <zide.chen@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
To sizing a 64-bit BAR, need to form the two 32-bit registers as a
64-bit words, before doing the calculation: inverting all bits and
incrementing by 1.
Tracked-On: #1568
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Signed-off-by: Zide Chen <zide.chen@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Remove the check to multi-function flag in PCI enumeration because when
this flag is set, Device IDs and Class codes, and this flag may vary
between functions.
We don't assume checking this bit in function 0 is safe enough.
Tracked-On: #1568
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Signed-off-by: Zide Chen <zide.chen@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The operands to shift operations (<<, >>) shall be unsigned integers.
v1 -> v2:
* replace 12U with CPU_PAGE_SHIFT when it is address shift case.
* replace 6UL with 0x6UL
Tracked-On: #861
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Compared with partition_mode.c, the major difference between them is
the list of PCI devices is statically defined or dynamically
enumerated and allocated.
Tracked-On: #1568
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Signed-off-by: Zide Chen <zide.chen@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Similar to MSI emulation, this patch emulates the Message Control word
within MSI-X Capability Structure.
Also it emulates MSI-X table. MSI-X remapping is triggered when the guest
is changing the Mask bit in Vector Control, or the Message Data/Addr when
MSI-X Enable bit is set.
Tracked-On: #1568
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Signed-off-by: Zide Chen <zide.chen@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Emulate MSI Capability structure for vm0 in sharing mode:
- it intercepts the IO requests for MSI Capability structure, emulates
the Message Control word, and bypasses all other I/O requests to the
physical device.
- criteria to trigger MSI remapping: MSI Enable bit is being changed,
Message Data/Addr is being changed when MSI Enable is set.
Tracked-On: #1568
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Signed-off-by: Zide Chen <zide.chen@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Add 'struct vpci_ops *ops' to 'struct vpci' so we have clearer structure:
- struct vpci: include struct vpci_ops pointing to different callback
functions for partition or sharing mode repsectively.
- struct pci_vdev: includes struct pci_vdev_ops to handle different vpci
functionalities:
hostbridge emulation
passthrough device BAR emulation
msi/msi-x remapping
This patch moves the code around but doesn't change the underlying logic
in terms of PCI spec handling. More detailed implementation:
- create new file partition_mode.c to house the implementation of partition mode
regarding the vpci layer.
- vpci.c: only keeps the abstract code which calls vpci->ops to functions
in partition_mode.c, and potentially to sharing_mode.c.
- the following functions are moved to partition_mode.c and renamed with
partition_mode prefix.
- vpci_init() -> partition_mode_vpci_init()
- vpci_cleanup() -> partition_mode_vpci_deinit()
- pci_cfg_io_write() -> partition_mode_cfgread()
- pci_cfg_io_read() -> partition_mode_cfgwrite()
Track-On: #1568
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Signed-off-by: Zide Chen <zide.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Reviewed-by: Li, Fei1 <fei1.li@intel.com>
commit 026ae83bd5 ("hv: include: fix 'Unused procedure parameter'")
removed the then unused parameter handler_private_data from
hv_mem_io_handler_t because MISRA-C requires that there should be no
unused parameters in functions.
This patch removes vcpu from the parameter list as well since this may
not be used by all users. Also it brings back handler_private_data which
is more flexible. For example, vioapic_mmio_access_handler() can use it
to pass vcpu pointer.
Tracked-On: #861
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Signed-off-by: Zide Chen <zide.chen@intel.com>
Reviewed-by: Li, Fei1 <fei1.li@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
- It starts from scaning bus 0 and scan other buses only if it is referred
as a Secondary Bus by a PCI-to-PCI bridge.
- Skip to next device if function 0 is not implemented.
- Don't enumerate function 1-7 if a device is not a multi-function device.
Tracked-On: #1568
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Signed-off-by: Zide Chen <zide.chen@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
In order to allow these functions to be called without an associated
struct pci_pdev (for example, at the time of PCI bus enumeration), these
two functions can not take the struct vdev as input parameter.
Tracked-On: #1568
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Signed-off-by: Zide Chen <zide.chen@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
- It makes more sense to return bool from pci_bar_access()
- other minor changes for cleanup
Tracked-On: #1568
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Signed-off-by: Zide Chen <zide.chen@intel.com>
Reviewed-by: Li, Fei1 <fei1.li@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Fix violations for function whose parameter can be read-only.
Tracked-On: #861
Signed-off-by: Huihuang Shi <huihuang.shi@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
- move the functions to access physical PCI configuration space from
pci_pt.c to the new file dm/hw/pci.c, so they can be accessed in
sharing mode as well. The new folder dm/hw is created in order to
move APIs talking to physical PCI devices out of dm/vpci.
- move the common vpci code from header file pci_priv.h to core.c.
- move file include/dm/vpci/vpci.h one level up. It seems the folder
include/dm/vpci is not necessary.
- This patch only moves code around, and doesn't make any logical
changes. Besides removes the static keyword from pci_pdev_read_cfg()
and pci_pdev_write_cfg()
Tracked-On: #1568
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Signed-off-by: Zide Chen <zide.chen@intel.com>
Reviewed-by: Li, Fei1 <fei1.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
- move most of the content of pci_priv.h to include/dm/pci.h.
This allows other code outside dm/vpci to be able to share these macros.
- code cleanup: fix alignments etc.
Tracked-On: #1568
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Signed-off-by: Zide Chen <zide.chen@intel.com>
Reviewed-by: Li, Fei1 <fei1.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Pointer param should be declared pointer to const if
the parameter is keeped read-only.
This patch changes pointer param whose name is vm.
Tracked-On:#861
Signed-off-by: Huihuang Shi <huihuang.shi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Input 'pin' should be less than 'NR_VPIC_PINS_TOTAL'
Tracked-On: #1479
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
@vioapic_set_pinstate() & vioapic_need_intr(),
add checking input value range for 'pin'.
Tracked-On: #1479
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
use pin_state[pin] to record vpic pin signal, and change the interface name
accordingly.
Tracked-On: #1269
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
- add missing brackets for 'if/else' statements based on MISRA-C
requirements
v1 -> v2:
* add brackets for each conditions in 'if' statements to improve
the readability
* modify 'ptdev_init' to make the logic clearer
Tracked-On: #861
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
