There are some integer type conversions reported by static
analysis tool for vcpu id, number of created vcpus, and
vpid, to reduce these type conversions, redesign vcpu id,
number of created vcpus, and vpid type as uint16_t as per
their usage, related 16-bit atomic operations shall be
added in HV.
MISRA C requires that all unsigned constants should have the suffix 'U'
(e.g. 0xffU), but the assembler may not accept such C-style constants.
Add 16-bit atomic add/dec/store operations;
Update temporary variables type and parameters type of
related caller;
Update vpid type as uint16_t;
Replace Macro with constant value for CPU_PAGE_SIZE.
Note: According to SDM A.10, there are some bits defined
in the IA32_VMX_EPT_VPID_CAP MSR to support the INVVPID
instruction, these bits don't mean actual VPID, so
the vpid field in the data struct vmx_capability doesn't
be updated.
V1--V2:
update comments for assembly code as per coding style;
Signed-off-by: Xiangyang Wu <xiangyang.wu@intel.com>
- move all relocatoin code from cpu.c and cpu.h to reloc.c and reloc.h
- no any logic changes
Signed-off-by: Zide Chen <zide.chen@intel.com>
Reviewed-by: Yin fengwei <fengwei.yin@intel.com>
In the current memory module, there are many constatn value
without U/UL suffix, it is reported as MISRA C violations by
static analysis tool.
Add 'U/UL' suffix for unsigned contant value in memory module
as needed.
Note:In the most case, CPU_PAGE_SIZE(0x1000) is used as
unsigned integer contant value, so CPU_PAGE_SIZE is defined
as unsigned integer contant value, and it is safety converted
into unsigned long type according to MISRA C standard.
Signed-off-by: Xiangyang Wu <xiangyang.wu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
there is a bug for system hang on SBL bootloader after we enabled turbo mode.
so add tmp patch to disable turbo mode as the work-around.
after SBL fixed it, we revert this patch.
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
In the data struct cpuinfo_x86, some field names have
prefix x86, others don't have prefix.
In order to unify names, update field names of struct
cpuinfo_x86 as per its usage purpose, remove prefix x86.
V1-->V2:
Resolve conflict in cpu.c by rebase command
V2-->V3:
Remove track-on id as per jack's comments
Signed-off-by: Xiangyang Wu <xiangyang.wu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This patch cleans up the integral type violations to MISRA C rules, mostly
related to signed constants that should be unsigned but also spelling out two
integer narrowing and dropping some macros negating unsigned integers.
v1 -> v2:
* Drop INT_ROUNDUPx macros since they are never used.
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The MMIO/PIO write APIs in io.h always take a uint32_t value but may uses it as
8, 16 or 32-bit integers. This patch converts the prototypes to align with their
functionality.
The pointer conversion and assignment are splitted to separate statements to
prevent static checkers from being confused about the underlying types.
v1 -> v2:
* Change the prototype of mmio-related functions, instead of keeping the
explicit conversions internal. The addresses are kept void* since in most
cases hva (in void*) is passed.
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
GCC preprocessor expands __LINE__ to signed decimal integers. Keep the prototype
of __assert aligned with this.
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
In the current trace.h, the entries use proper unsigned types while some
function prototypes and local variables still use plain 'int', resulting in
implicit signedness conversions.
This patch makes the following conversions:
* evid: int -> uint32_t,
* n_data & cpu: 8-bit bit-field -> uint8_t,
* local variable holding the value from strnlen_s(): int -> size_t.
Note: In the following definition:
struct trace_entry {
uint64_t tsc; /* TSC */
uint64_t id:48;
....
The type of bit-field ''id'' cannot be uint32_t since gcc complains about
bit-fields larger than the type. Thus this patch keeps it as is.
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
transfer num_vcpus,exp_num_vcpus to uint16_t.
transfer vm_hw_num_cores to uint16_t.
Signed-off-by: Huihuang Shi <huihuang.shi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
To be consistant with inline function mem_write, modifying the
mem_read* and using inline function instead.
Signed-off-by: Yang, Yu-chu <yu-chu.yang@intel.com>
To follow the Misra-c standard, the assignment operation inside
function-like macro should be avoided. Replaced the violations
macro using inline function instead.
Signed-off-by: Yang, Yu-chu <yu-chu.yang@intel.com>
There are unsinged constant values don't have 'U/UL' suffix
in the HV reported by static analysis tool.
Add 'U/UL' suffix for unsigned constant values as needed.
Tracked-on: ccm0001001-247033
Signed-off-by: Xiangyang Wu <xiangyang.wu@intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
There are some narrow integer conversion violations
in the HV reported by static analysis tools.
The narrow integer conversions are resolved by
following methods:
* Explicit type conversion as needed;
* Update suffix of constant value as 'U'
as needed.
cked-on: ccm0001001-247033
Signed-off-by: Xiangyang Wu <xiangyang.wu@intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
Currently IOAPIC pins are represented using various types, including uint16_t,
int, uint8_t and uint32_t. This patch converts all pins to uint8_t since the
maximum number of interrupt input pins per IOAPIC is limited to 240. The special
value IOAPIC_INVALID_PIN is defined to indicate that a valid pin cannot be
found.
This type clean up also has the following impacts.
* The values in the ''legacy_irq_to_pin'' table are piggybacked with their
trigger mode. This patch splits them as the piggyback prevents us from
using a uint8_t[] for this table, and these two information are never used
at the same time.
* The ''offset'' parameter in ioapic_read_reg32 & ioapic_write_reg32 are
promoted to uint32_t to minimize explicit type conversions and keep
aligned with the type of formal parameters of mmio_(read|write)_long.
Tracked-on: ccm0001001-247033
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
According to C99 standard, -1 integer constant with 'U/UL'
suffix has no type.
To explicit the integer constant:
Update -1U or -1UL as ~0U or ~0UL, or invalid number according
to usage case.
V1-->V2:
Update parameter name and type of send_startup_ipi since
the second parameter is used as pcpu_id;
Update related comments for code clearity.
V2-->V3:
Update comments of struct acrn_irqline;
rename cpu_startup_dest as dest_pcpu_id in the second
parameter of send_startup_ipi.
Tracked-on: ccm0001001-247033
Signed-off-by: Xiangyang Wu <xiangyang.wu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Extend struct trusty_boot_param to hold rpmb_key.
Copy rpmb_key from trusty_boot_param when initialize
trusty.
Signed-off-by: Qi Yadong <yadong.qi@intel.com>
Reviewed-by: Zhu Bing <bing.zhu@intel.com>
Reviewed-by: Wang Kai <kai.z.wang@intel.com>
According to MISRA C:2012, suffix 'U/UL' shall be for
unsigned const value, the member of enum variable should
not be used to compare with integer variable.
Add 'U/UL' for unsigned const value in the CPU module;
Use Macro insteading of enum feature_word since the member
of feature_word is used to compare with integer variable;
Use hex number insteading of Macro in the assembly code.
V1-->V2:
Update the suffix of some constant value as 'UL'
according to its'storage variable;
Split MACRO updates used in the assembly code
in other patch.
Signed-off-by: Xiangyang Wu <xiangyang.wu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
MISRA C requires that all unsigned constants should have
the suffix 'U/UL'(e.g. 0xffU), but the assembler may not
accept such C-style constants.
To work this around, all unsigned constants must be
explicitly spells out in assembly with a comment tracking
the original expression from which the magic number is
calculated.
Signed-off-by: Xiangyang Wu <xiangyang.wu@intel.com>
Here is how the recursion might happen:
when there is something wrong
|
sbuf_put -> memcpy_s -> pr_err -> do_logmsg
| |
-----------------------------------
Replace 'pr_err' with 'ASSERT' in 'memcpy_s' to break this kind of
recursion.
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
IOAPIC pins always fit in 8-bit and we already use uint8_t for virt_pins. This
patch converts pins in vioapic to uint8_t.
This is based on Arindam's previous patch ("was: hv: Cleanup and optimise
vioapic.c"), with SOS boot failure resolved, format string updated, complex
arithmetic expression with implicit type conversion decoupled. Also make some
local variables representing interrupt vectors uint32_t.
Signed-off-by: Arindam Roy <arindam.roy@intel.com>
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
A couple of diagram were written using text characters. This
commit changes that to use pictures instead.
Signed-off-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
Move the existing Trusty document to the doc/ folder (where
it belongs) and convert the text to ReST.
The Documentation/ folder under hypervisor/ is removed as all
documents should be put under doc/.
All technical information has been preserved or was already
available in other documents.
Signed-off-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
This patch makes necessary integer narrowing and/or signedness conversion
explicit.
While some narrowing are expected behavior, the correctness of the others relies
on the specifications of some interfaces (e.g. the higher 32-bit of what
exec_vmread() returns is all 0s if the given field is 32-bit). Add a stub
for now to avoid missing them.
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
- rename 'cpu_set_logical_id()' to 'set_current_cpu_id()'
- rename 'cpu_find_logical_id()' to 'get_cpu_id_from_lapic_id()'
- some clean up in cpu.c & trampolines.s
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
In the hypervisor, some strings are assigned to non const
object, this violates MISRA C:2012.
Update the type of the object as const type since it always
points to string.
Signed-off-by: Xiangyang Wu <xiangyang.wu@intel.com>
We need bitmap bit ops API for 32bit operators like vlapic irr
registers.
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
There are extra type conversion in the HV since logical_id
type is uint32_t and the input argument of bitmap operations
is uint16_t. BTW, the name of logical_id is not clear enough
to express its usage.
So the following updates are made in this patch:
Update logical_id type as unit_16 to reduce type casting;
Update related print argument;
Rename related logical_id as pcpu_id as needed.
Note: logical_id in the interrupt_init definition have been
updated in cpu_id cleanup patch.
Signed-off-by: Xiangyang Wu <xiangyang.wu@intel.com>
There are extra type conversion in the HV since cpu_id
type is uint32_t and the return value type of get_cpu_id
is uint16_t. BTW, the name of cpu_id is not clear enough
to express its usage.
So the following updates are made in this patch:
Update cpu_id type as unit_16 to reduce type casting;
Update related temporary variables type;
Update related print argument;
Change the input parameter name of interrupt_init as
cpu_id to keep align with function implement;
Rename cpu_id as pcpu_id as needed.
Signed-off-by: Xiangyang Wu <xiangyang.wu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
In the hypervisor, virtual cpu id is defined as "int" or "uint32_t"
type in the hypervisor. So there are some sign conversion issues
about virtual cpu id (vcpu_id) reported by static analysis tool.
Sign conversion violates the rules of MISRA C:2012.
BTW, virtual cpu id has different names (vcpu_id, cpu_id, logical_id)
for different modules of HV, its type is defined as "int" or "uint32_t"
in the HV. cpu_id type and logical_id type clean up will be done in
other patchs.
V1-->V2:
More clean up the type of vcpu id;
"%hu" is for vcpu id in the print function.
Signed-off-by: Xiangyang Wu <xiangyang.wu@intel.com>
Misra C required signed/unsigned conversion with cast.
V1->V2:
a.split patch to patch series
Signed-off-by: Huihuang Shi <huihuang.shi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Misra C required signed/unsigned conversion with cast.
V1->V2:
a.split patch to patch series
V2->V3:
a.change the uint64_t type numeric constant's suffix from U to UL
Signed-off-by: Huihuang Shi <huihuang.shi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Misra C required signed/unsigned conversion with cast.
V1->V2:
a.split patch to patch series
V2->V3:
a.change the uint64_t type numeric constant's suffix from U to UL
Signed-off-by: Huihuang Shi <huihuang.shi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Misra C required signed/unsigned conversion with cast.
V1->V2:
a.split patch to patch series
V2->V3:
a.change the uint64_t type numeric constant's suffix from U to UL
Signed-off-by: Huihuang Shi <huihuang.shi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Misra C required signed/unsigned conversion with cast.
V1->V2:
a.split patch to patch series
V2->V3:
a.Change the API tgt_uart/ static int uart16550_get_rx_err(uint32_t rx_data) to return uint32_t
b.modified the format of if from "if (length > 32*(length/32))" to
"if (length % 32U > 0)"
V3->V4:
a.change the uint64_t type numeric constant's suffix from U to UL
Signed-off-by: Huihuang Shi <huihuang.shi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Misra C required signed/unsigned conversion with cast.
V1->V2:
a.split patch to patch series
V2->V3:
a.change the uint64_t type numeric constant's suffix from U to UL
Signed-off-by: Huihuang Shi <huihuang.shi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
logmsg() expects the severity given to be uint32_t. This patch adds the 'U'
suffix to the severity constants.
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Rename bit operation function fls as fls32, keep name
style with other bit operation function.
Signed-off-by: Xiangyang Wu <xiangyang.wu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This patch represents TSC freqeuency in KHz using a 32-bit unsigned integer.
The conversion macros between ticks and us/ms are changed to inline functions to
enforce the types of the input parameters. Note that us_to_ticks accepts only
uint32_t (~4K us at most) and never overflows.
Results of some unit tests on the conversion functions:
calibrate_tsc, tsc_khz=1881600
64us -> ticks: 120422
64us -> ticks -> us: 63
511us -> ticks: 961497
511us -> ticks -> us: 510
1280000 ticks -> us: 680
1280000 ticks -> us -> ticks: 1279488
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The parameter to udelay is the microseconds to wait for, which should be an
unsigned integer.
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
ioapic reset function will be called when doing guest reset.
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
To reduce type conversion in HV:
Update return type of function ffs64 and ffz64 as uint16;
For ffs64, when the input is zero, INVALID_BIT_INDEX is returned;
Update temporary variable type and return value check of caller
when it call ffs64 or ffz64;
Note: In the allocate_mem, there is no return value checking for
calling ffz64, this will be updated latter.
V1-->V2:
INVALID_BIT_INDEX instead of INVALID_NUMBER
Coding style fixing;
INVALID_CPU_ID instead of INVALID_PCPU_ID or INVALID_VCPU_ID;
"%hu" is used to print vcpu id (uint16_t);
Add "U/UL" for constant value as needed.
V2-->V3:
ffs64 return INVALID_BIT_INDEX directly when
the input value is zero;
Remove excess "%hu" updates.
V3-->V4:
Clean up the comments of ffs64;
Add "U" for constant value as needed.
Signed-off-by: Xiangyang Wu <xiangyang.wu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Change the return type of function fls64 and clz64 as uint16_t;
When the input is zero, INVALID_ID_INDEX is returned;
Update temporary variable type and return value check of caller
when it call fls64 or clz64;
When input value is zero, clz64 returns 64 directly.
V1-->V2:
INVALID_BIT_INDEX instead of INVALID_NUMBER;
Partly revert apicv_pending_intr udpates;
Add type conversion as needed;
Coding style fixing.
V2-->V3:
Correct type conversion;
fls64 return INVALID_BIT_INDEX directly when
the input value is zero.
V3-->V4:
No updates for this part in PATCH V4.
Note: For instruction "bsrq", destination register value
is undefined when source register value is zero.
Signed-off-by: Xiangyang Wu <xiangyang.wu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Change the return type of function fls and clz as uint16_t;
When the input is zero, INVALID_BIT_INDEX is returned;
Update temporary variable type and return value check of caller
when it call fls or clz;
When input value is zero, clz returns 32 directly.
V1-->V2:
INVALID_BIT_INDEX instead of INVALID_NUMBER;
Add type conversion as needed;
Add "U/UL" for constant value as needed;
Codeing style fixing.
V2-->V3:
Use type conversion to remove side effect of
the variable which stores fls/clz return value;
fls return INVALID_BIT_INDEX directly when the
input value is zero.
V3-->v4:
Clean up comments for fls.
Note: For instruction "bsrl", destination register value
is undefined when source register value is zero.
Signed-off-by: Xiangyang Wu <xiangyang.wu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
There are multiple helpers for collecting info to be printed on the ACRN uart
console. They are unreachable code in release builds in which the uart console
is removed.
To define a precise boundary for safety-related activities, this patch wraps the
declarations and definitions to these helpers with "#ifdef HV_DEBUG" so that
these unreachable APIs will be dropped in release builds.
v1 -> v2:
* Fix coding style: no empty lines between #ifdef and the wrapped code.
* Also drop get_rte_info() in ioapic.c, which is solely used by
get_ioapic_info().
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Similar to cr0/4:
- use context->vmx_ia32_pat to save/restore VMX_GUEST_IA32_PAT field
- use context->ia32_pat to keep track the guest' view of IA32_PAT MSR
Signed-off-by: Zide Chen <zide.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This patch makes use of IA32_PAT MSR to emulate cache disabled behaviour
When the guest is requesting to set CR0.CD:
- Keep guest's CR0.CD and CR0.NW bits unchanged
- Write IA32_PAT MSR with all-UC entries to change the effective memory
type for all GPA to UC for the guest VCPU
- It depends on trapping wrmsr to IA32_PAT to prevent any entry in
IA32_PAT being changed to non UC type by the guest
When the guest is requesting to clear CR0.CD:
- restore the content of guest's IA32_PAT MSR
Signed-off-by: Zide Chen <zide.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Preparing for emulating guest's CR0.CD and CR0.NW bits:
- Intercept both rdmsr and wrmsr for IA32_PAT
- Track guest's IA32_PAT MSR with vcpu.arch_vcpu.contexts.ia32_pat
Signed-off-by: Zide Chen <zide.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
enum cpu state is better than cpu state macro.
V1->V2:
move enum cpu_state under #ifndef ASSEMBLER MACRO to avoid
assembler compiler scan.
Signed-off-by: Huihuang Shi <huihuang.shi@intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
We define attr.name in struct vm and named as ("vm_%d", attr.id). attr.name only
be used in debug tool vm_list. It does't deserve to do so in OS created flow
(aka function create_vm). It's better to handle this in vm_list tool.
Signed-off-by: Kaige Fu <kaige.fu@intel.com>
Acked-by: Eddie Dong <eddie.dong@inte.com>
struct map_params's member page_table_type is enum _page_table_type,
transferred it.
Signed-off-by: Huihuang Shi <huihuang.shi@intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
There are two prefix (aka TRC and TRACE) for trace event. This patch make all
the trace event prefix consist with TRACE.
No functional change.
Signed-off-by: Kaige Fu <kaige.fu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
operations
For reducing sign conversion in hypervisor:
Update parameters of bitmap operations as unsigned type;
Update the input of related caller as unsigned type when the
caller's input parameter is const variable or the variable is
only used by bitmap operations.
V1-->V2:
(1) Explicit casting for the first parameter
of all bitmap operations;
(2) Remove mask operation for explicit casting
of all bitmap operations, since masking is
useless. Otherwise, this trucation is dangerous.
V2-->V3:
(1) Explicit casting for all bitmap operations parameter;
(2) Masking bit offset with 6-bit;
(3) Add few comments about bit offset.
V3-->V4:
add '\' for some statement of bitmap macro
Signed-off-by: Xiangyang Wu <xiangyang.wu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The struct member types should be transfer to non-basic types,
chaned it to length-prefix(uint32_t,int32_t ...) type.
Signed-off-by: Huihuang Shi <huihuang.shi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
- replace 'strtol()' with 'strtol_deci()'
-- supports string with decimal format
- replace 'strtoul()' with 'strtoul_hex()'
-- support string with hex format
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
According intel mannual and ACPI mannual,lapic_id length is 1 byte.
V1->V2:
Add U suffix to the numeric when do arithmetic operation on lapic.
Signed-off-by: Huihuang Shi <huihuang.shi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Later patch will refactor acrntrace to make trace data output as raw data(binary)
and introduce a new tool(acrntrace_format) to parse raw data to human-readable
file.
Adding nr of data and cpuid to trace_entry will make it easy for acrntrace_format
to parse data file and inditify which cpu this trace entry belong to.
Signed-off-by: Kaige Fu <kaige.fu@intel.com>
Reviewed-by: Yan, Like <like.yan@intel.com>
Reviewed-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
The local variable type should be transfer to non-basic type,
chaned it to length-prefix(uint32_t,int32_t ...) type.
Char *type or char array type which used to pointer a string
will be keeped.
V1->V2 add extra comments.
Signed-off-by: Huihuang Shi <huihuang.shi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
ACRN needs to trap the pm1a/pm1b written/read from VM0. So we
could know when should we put the system to S3.
We will have two path back to VM0:
- S3 enter/exit sucess. Will reset VM0 and jump to VM0 wakeup vec
with real mode
- S3 enter/exit failed. Will return to the next instruction of
pm1a/pm1b register writing. VM0 will read the pm1a/pm1b evt
register to check whether it's waked up or not.
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Emulate VM0 resume from S3 state:
- reset BSP of VM0
- set the BSP entry to saved VM0 wakeup vec and set BSP to real mode
- start BSP
To match trampoline_spinlock release on ACRN Sx resume path, acquire
trampoline_spinlock if ACRN Sx enter fails.
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
enter_s3 is main function for ACRN to enter S3 state with following
process:
- pause vm0
- save the wakeup vec of vm0 and set wakeup vec of ACRN. So
resume from S3 will jump to ACRN wakeup
- offline APs
- update the main entry of trampoline to resume entry. After BSP
is resume from S3, it will jump to resume entry instead of AP
startup routine
- turn off vmx
- suspend devices
- enter S3.
exit S3 with following process:
- release trampoline_spinlock which is hold in trampoline code
- resume devices
- enable vmx
- update the main entry of trampoline to AP startup routine.
- online APs.
The following operations will be resume vm0 which will be added
in next patch.
Signed-off-by: Zheng Gen <gen.zheng@intel.com>
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Couple of small changes merged in this change:
- export main_entry, trampoline_spinlock and stop_cpus.
- change vm_resume() name to resume_vm()
- change resume_console_enable() name to resume_console()
- extend reset_vcpu to reset more fields of vcpu
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The S3 enter lowlevel routine saves the cpu context to memory
and enter S3 state
The S3 wakeup lowlevel routine restore cpu context and return.
Signed-off-by: Zheng Gen <gen.zheng@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
We will add host_pm.h for ACRN power manager header file.
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
- add a commont head file include/common/irq.h, to include the common data
structure and APIs;
- move the common data struct and APIs from arch/x86/irq.h to the common header.
Signed-off-by: Yan, Like <like.yan@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
MISRA C required function return type should be consistented.
Signed-off-by: Huihuang Shi <huihuang.shi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
It is already assumed that ''long'' has 8-bytes, and thus there is no need to
use ULL to indicate a 8-byte unsigned constant.
This patch changes all ULL suffixes found in the hypervisor to UL.
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Snoop control is not supported in the graphics VT-d engine and so should
be disabled in the PTEs. Also enabled iommu for graphics in the
dmar_drhd array.
v2: removed disable iommu in handle_one_drhd and combined if cond.
v3: minor code review changes
v4: moved the snoop control change to ept.c to accomodate upstream changes
Signed-off-by: Anitha Chrisanthus <anitha.chrisanthus@intel.com>
Reviewed-by: Gong Zhipeng <zhipeng.gong@intel.com>
The for loop statement should work in both & and &&, but it seems
make more sense to have && when executing a condtion.
Signed-off-by: Yang, Yu-chu <yu-chu.yang@intel.com>
It could be also used by host as well. So we remove GUEST from
MACRO name
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Eddie Dong <Eddie.dong@intel.com>
phys_cpu_num is more popular than phy_cpu_num, update them
through command.
Signed-off-by: Xiangyang Wu <xiangyang.wu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Update the structure definition to define the address type
(HVA vs HPA vs GPA) explicitly.
Convert address to HVA before access the GPA/HPA type of address.
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Before we set the page table, we should know the attribute. So
move configure the page table attribute outside of modify_paging.
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
MISRA C doesn't allowed negative shift, changed any potential signed value
to unsigned value.
Signed-off-by: Huihuang Shi <huihuang.shi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Vectors are unsigned integers now. This patch converts the vectors in struct
ptdev_msi_info to uint32_t so that all variables representing interrupt vectors
are aligned.
No other changes needed except the type declarators since the other functions
manipulating vectors already takes/returns uint32_t.
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
In the hypervisor, physical cpu id is defined as "int" or "uint32_t"
type in the hypervisor. So there are some sign conversion issues
about physical cpu id (pcpu_id) reported by static analysis tool.
Sign conversion violates the rules of MISRA C:2012.
In this patch, define physical cpu id as "uint16_t" type for all
modules in the hypervisor and change related codes. The valid
range of pcpu_id is 0~65534, INVALID_PCPU_ID is defined to the
invalid pcpu_id for error detection, BROADCAST_PCPU_ID is
broadcast pcpu_id used to notify all valid pcpu.
The type of pcpu_id in the struct vcpu and vcpu_id is "int" type,
this will be fixed in another patch.
V1-->V2:
* Change the type of pcpu_id from uint32_t to uint16_t;
* Define INVALID_PCPU_ID for error detection;
* Define BROADCAST_PCPU_ID to notify all valid pcpu.
V2-->V3:
* Update comments for INVALID_PCPU_ID and BROADCAST_PCPU_ID;
* Update addtional pcpu_id;
* Convert hexadecimals to unsigned to meet the type of pcpu_id;
* Clean up for MIN_PCPU_ID and MAX_PCPU_ID, they will be
defined by configuration.
Note: fix bug in the init_lapic(), the pcpu_id shall be less than 8,
this is constraint by implement in the init_lapic().
Signed-off-by: Xiangyang Wu <xiangyang.wu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
function definition in header file must be signed as static inline type
Signed-off-by: Cai Yulong <yulongc@hwtc.com.cn>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Per MISRA C, operands to bit-wise operations should have unsigned
types. However, C99 prioritizes to use signed integers for hexadecimal constants
without the 'U' suffixes, leading to tons of bit operations on signed integers.
This patch series add the 'U' suffixes to the constants which are used in bit
operations, and add the intended width of these integers when applicable
(i.e. the target value is at least 32-bit wide) to avoid functional differences
due to signed vs. unsigned extensions. The rule of thumb is:
'0' for signed char/short/int
'0U' for unsigned char/short/int
'0L' for signed long (should be 64-bit)
'0UL' for unsigned long (should be 64-bit)
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
MISRA C explicit required expression should be boolean when
in branch statements (if,while...).
Signed-off-by: Huihuang Shi <huihuang.shi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
- when init, cr0 & cr4 should read from VMCS
- when world switch, cr0/cr4 read shadow should also be save/restore
v2:
- use context->vmx_cr0/cr4 to save/restore VMX_GUEST_CR0/CR4
- use context->cr0/cr4 to save/restore VMX_CR0/CR4_READ_SHADOW
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
MISRA C required that return value should be used, missing for it should
add "(void)" prefix before the function call.
Some function can be declared without return value to avoid this problem.
Signed-off-by: Huihuang Shi <huihuang.shi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
- this patch is to enable SMEP in hypervisor, SMEP protects
guests' memory from supervisor-mode instruction fetches,
in other words, hypervisor which operating in supervisor
mode can't fetch instructions from (guests' memory)
linear addresses that are accessible in user mode.
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Move common stuff, like ptdev entry and softirq, to new ptdev.c
Signed-off-by: Edwin Zhai <edwin.zhai@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This change is to fix a guest vm hang issue at vm reset, especially easy to
be seen when it's a watchdog timeout reset.
vlapic_init create and init vlapic.vlapic_timer without deleting the
timer from cpu_times list, which breaks the list, results in a timer remains
with callback points to an invalid location.
Acked-by: Eddie Dong <eddie.dong@intel.com>
Signed-off-by: Yan, Like <like.yan@intel.com>
These two functions will be called when ACRN enter/exit S3.
Signed-off-by: Zheng Gen <gen.zheng@intel.com>
Signed-off-by: Yan Like <like.yan@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
They will be called when acrn enter S3.
NOTE: it's only needed for native BSP because all APs are offline.
Signed-off-by: Zheng Gen <gen.zheng@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Add a volatile declaration to pointer parameter to avoid compiler
to optimize it by using old value saved in register instead of
accessing system memory.
Signed-off-by: Zheng, Gen <gen.zheng@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The hardcoded CPU Px Cx table should be read only, so set them to static
and const for safety.
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The pm S state data is from host ACPI info and needed for S3/S5
implementation.
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
On some occations HV operates relying on host acpi info, we can use a
c file to store this data. The data could be hardcoded or use offline
tool that run on target first and then generate the file automatically.
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Currently irq and vector numbers are used inconsistently.
* Sometimes vector or irq ids is used in bit operations, indicating
that they should be unsigned (which is required by MISRA C).
* At the same time we use -1 to indicate an unknown irq (in
common_register_handler()) or unavailable irq (in
alloc_irq()). Also (irq < 0) or (vector < 0) are used for error
checking. These indicate that irq or vector ids should be signed.
This patch converts irq and vector numbers to unsigned 32-bit integers, and
replace the previous -1 with IRQ_INVALID or VECTOR_INVALID. The branch
conditions are updated accordingly.
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
- Also update all the references that need the absolute HPA with the
actual load addresses
- Save the trampoline code address to trampline_start16_paddr
Signed-off-by: Zheng, Gen <gen.zheng@intel.com>
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Signed-off-by: Zide Chen <zide.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Acked-by: Xu, Anthony <anthony.xu@intel.com>
- For UEFI boot, allocate memory for trampoline code in ACRN EFI,
and pass the pointer to HV through efi_ctx
- Correct LOW_RAM_SIZE and LOW_RAM_START in Kconfig and bsp_cfg.h
- use trampline_start16_paddr instead of the hardcoded
CONFIG_LOW_RAM_START for initial guest GDT and page tables
Signed-off-by: Zheng, Gen <gen.zheng@intel.com>
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Signed-off-by: Zide Chen <zide.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Acked-by: Xu, Anthony <anthony.xu@intel.com>
in real mode part, add extra pointers for page tables and long jump buffer
so it's possible for HV code to patch the relocation offset
in long mode part, use absolute addressing when referring HV symbols,
and use relative addressing for symbols within trampoline code
Signed-off-by: Zheng, Gen <gen.zheng@intel.com>
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Signed-off-by: Zide Chen <zide.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Acked-by: Xu, Anthony <anthony.xu@intel.com>
emalloc_for_low_mem() is used if CONFIG_EFI_STUB is defined.
e820_alloc_low_memory() is used for other cases
In either case, the allocated memory will be marked with E820_TYPE_RESERVED
Signed-off-by: Zheng, Gen <gen.zheng@intel.com>
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Signed-off-by: Zide Chen <zide.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Acked-by: Xu, Anthony <anthony.xu@intel.com>
- vm_gva2gpa is same as gva2gpa, so replace it with gva2gpa directly.
- remove dead usage of vm_gva2gpa in emulate_movs.
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
there are data transfer between guest virtual space(GVA) & hv(HVA), for
example, guest rip fetching during instruction decoding.
GVA is address continuous, but its GPA could be only 4K page address
continuous, this patch adds copy_from_gva & copy_to_gva functions by
doing page walking of GVA to avoid address breaking during accessing GVA.
v2:
- modify API interface based on new gva2gpa function, err_code added
- combine similar code with inline function _copy_gpa
- change API name from vcopy_from/to_vm to copy_from/to_gva
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
This patch drops "#include <bsp_cfg.h>" and include the generated config.h in
CFLAGS for the configuration data.
Also make sure that all configuration data have the 'CONFIG_' prefix.
v4 -> v5:
* No changes.
v3 -> v4:
* Add '-include config.h' to hypervisor/bsp/uefi/efi/Makefile.
* Update comments mentioning bsp_cfg.h.
v2 -> v3:
* Include config.h on the command line instead of in any header or source to
avoid including config.h multiple times.
* Add config.h as an additional dependency for source compilation.
v1 -> v2:
* No changes.
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Cleanup "cpu_secondary_xx" in the symbols/section/functions/variables
name in trampline code.
There is item left: the default C entry is Ap start c entry. Before
ACRN enter S3, the c entry will be updated to high level S3 C entry.
So s3 resume will go s3 resume path instead of AP startup path.
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Signed-off-by: Zheng Gen <gen.zheng@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Acked-by: Eddie Dong <Eddie.dong@intel.com>
Linux commit edfe63ec97ed ("x86/mtrr: Fix Xorg crashes in Qemu sessions")
disables PAT feature if MTRR is not enabled. This patch does partial
emulation of MTRR to prevent this from happening: enable fixed-range
MTRRs and disable virable range MTRRs
By default IA32_PAT MSR (SDM Vol3 11.12.4, Table 11-12) doesn't include
'WC' type. If MTRR is disabled from the guests, Linux doesn't allow
writing IA32_PAT MSR so WC type can't be enabled. This creates some
performance issues for certian applications that rely on WC memory type.
Implementation summary:
- Enable MTRR feature: MTRRdefType.E=1
- Enable fixed range MTRRs: MTRRCAP.fix=1, MTRRdefType.FE=1
- For simplicity, disable variable range MTRRs: MTRRCAP.vcnt=0.
It's expected that this bit is honored by the guests and they won't
change the guest memory type through variable MTRRs.
Signed-off-by: bliu11 <baohong.liu@intel.com>
Signed-off-by: Zide Chen <zide.chen@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
- Add PAGING_REQUEST_TYPE_MODIFY_MT memory map request type
- Update map_mem_region() to allow modifying the memory type related
fields in a page table entry
- Add ept_update_mt()
- add modify_mem_mt() for both EPT and MMU
Signed-off-by: Zide Chen <zide.chen@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
- export start_cpus to start/online APs.
- Add stop_cpus to offline APs.
- Update cpu_dead to decrement running cpus number and do cleanup
for AP down
Signed-off-by: Yin Fegnwei <fengwei.yin@intel.com>
Acked-by: Eddie Dong <Eddie.dong@intel.com>
Change need_scheduled fileds of schedule context to flags because
it's not only used for need_schedule check.
Add two functions to request/handle cpu offline.
The reason we only handle cpu offline request in idle thread is
that we should pause the vcpu running on target pcpu. Then it's
only possible that target pcpu get cpu offline request in idle
thread.
Signed-off-by: Yin Fegnwei <fengwei.yin@intel.com>
Acked-by: Eddie Dong <Eddie.dong@intel.com>
To handle cpu down/up dynamically, arcn needs to support vmx off/on
dynamically. Following changes is introduced:
vmx_off will be used when down AP. It does:
- vmclear the mapped vcpu
- off vmx.
exec_vmxon_instr is updated to handle start and up AP both. It does
- if vmx was on on AP, load the vmxon_region saved. Otherwise,
allocate vmxon_region.
- if there is mapped vcpu, vmptrld mapped vcpu.
Signed-off-by: Zheng Gen <gen.zheng@intel.com>
Signed-off-by: Yin Fegnwei <fengwei.yin@intel.com>
Acked-by: Eddie Dong <Eddie.dong@intel.com>
Per performance consideration, we don't flush vcpu context when doing
vcpu swithing (because it's only swithing between vcpu and idle).
But when enter S3, we need to call vmclear against all vcpus attached
to APs. We need to know which vcpu is attached with which pcpu.
This patch introduced API to get vcpu mapped to specific pcpu.
Signed-off-by: Yin Fegnwei <fengwei.yin@intel.com>
Acked-by: Eddie Dong <Eddie.dong@intel.com>
current_vcpu is not correct when there are multi vcpus in one VM,
using it is in-correct, so remove it.
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Retrieve dseed from SeedList HOB(Hand-Off-Block).
SBL passes SeedList HOB to ACRN by MBI modules.
Signed-off-by: Qi Yadong <yadong.qi@intel.com>
Reviewed-by: Zhu Bing <bing.zhu@intel.com>
Reviewed-by: Wang Kai <kai.z.wang@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The current implementation of per_cpu relies on several non-c99 features,
and in additional involves arbitrary pointer arithmetic which is not MIS-
RA C friendly.
This patch introduces struct per_cpu_region which holds all the per_cpu
variables. Allocation of per_cpu data regions and access to per_cpu vari-
ables are greatly simplified, at the cost of making all per_cpu varaibl-
es accessible in files.
Signed-off-by: Huihuang Shi <huihuang.shi@intel.com>
Enable VMX vpid ctrl and assign an unique vpid to each vcpu
so that VMX transitions are not required to invalidate any
linear mappings or combined mappings.
SDM Vol 3 - 28.3.3.3
If EPT is in use, the logical processor associates all mappings
it creates with the value of bits 51:12 of current EPTP.
If a VMM uses different EPTP values for different guests, it may
use the same VPID for those guests. Doing so cannot result in one
guest using translations that pertain to the other.
In our UOS, the trusty world and normal world are using different
EPTP. So we can use the same VPID for it.
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
We need know which tlb to flush: ept or vpid.
1. error handle for invept.
it's the same with invvpid error handle.
change its name to compatible with vpid.
2. the macro name for flush ept tlb request.
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
In current implementation, on sbl platform, vm0 bsp
starts from 64bit mode. And hv need to prepare init
page table for it.
In this patch series, on sbl platform, vm0 bsp starts
from non-paging protected mode.
This patch prepares an init gdt for vm0 bsp on sbl
platform.
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Acked-by: Xu, Anthony <anthony.xu@intel.com>
Translate gva2gpa in different paging modes.
Change the definition of gva2gpa.
- return value for error status
- Add a parameter for error code when paging fault.
Change the definition of vm_gva2gpa.
- return value for error status
- Add a parameter for error code when paing fault.
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Xu, Anthony <anthony.xu@intel.com>
Use # of paging level to identify paging mode
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
Acked-by: Xu, Anthony <anthony.xu@intel.com>
In current implemenation, cr0/cr4 host mask value are set
according to the value from fixed0/fixed1 values of cr0/cr4.
In fact, host mask can be set to the bits, which need to be trapped.
This patch, add code to support exiting long mode in CR0 write handling.
Add some check when modify CR0/CR4.
- CR0_PG, CR0_PE, CR0_WP, CR0_NE are trapped for CR0.
PG, PE are trapped to track vcpu mode switch.
WP is trapped for info of protection when paing walk.
NE is always on bit.
- CR4_PSE, CR4_PAE, CR4_VMXE are trapped for CR4.
PSE, PAE are trapped to track paging mode.
VMXE is always on bit.
- Reserved bits and always off bits are not allow to be set by guest.
If guest try to set these bits when vmexit, a #GP will be injected.
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Xu, Anthony <anthony.xu@intel.com>
_Static_assert is supported in C11 standard.
Please see N1570(C11 mannual) 6.4.1.
replace _Static_assert with ASSERT.
Signed-off-by: huihuang shi <huihuang.shi@intel.com>
Hypercall will return errno to SOS (Now is linux kernel).
Let's define this more general.
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
vm_attr_name, vm_state_info_privilege & vm_created are not used
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Xu, Anthony <anthony.xu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
vm_state_info in struct vm_arch is not used, remove it
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Xu, Anthony <anthony.xu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Guest CR3 read/write operations are not trapped.
Remove CR3 handling in cr_access_vmexit_handler.
Also remove unused API vmx_read_cr3.
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Move from vmexit.c to vmx.c
Declare the functions in vmx.h
Rename the functions' name with prefix vmx_.
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
There are some massages which is not fatal error but should to print
to serial and sbuf(hvlog) at the same time. pr_fatal is for fatal error
massages and it is not good choice for the situation above.
Introduce a new API pr_acrnlog to deal with the situation. And replace the
following printf with pr_acrnlog for massages should be print to sbuf and
serial. Then developers can get those massages on serial and BTM(Boot Time
Measurement) can use acrnlog to get those massages from sbuf.
BTM refers to Boot Time Measurement which will read acrnlog file to get
timestamps of steps we want.
Signed-off-by: Kaige Fu <kaige.fu@intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
When we create an UOS, we didn't indicate the vmid.
Thus we can't get the vm description for the vm
description array.
Instead we use a temporary vm description to save data to
fill the vm structure when crate an UOS. It's uselesss once
UOS has created. So we don't need to maintain vm description
array here for UOS.
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
