This is the counterpart to the PIO emulation side.
1. ept_violation_vmexit_handler (entry point for handling vmexit on EPT instruction):
Extract mmio address, size, direction and value (for write only), fill in an
I/O request, invoke do_io to handle that and emulate_pio_post for
post-processing.
2. emulate_io
Handle the given I/O request, either completed by registered MMIO handlers
or sent to VHM.
3. emulate_mmio_post:
Update guest registers after the emulation is done.
v2 -> v3:
* Rename: emulate_mmio_by_handler -> hv_emulate_mmio.
* Inline the original hv_emulate_mmio.
* No longer check alignment. The handlers are responsible for handling
unaligned accesses.
v1 -> v2:
* Rename: do_io -> emulate_io.
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This patch refactors how I/O instructions are emulated, in order for a unify the
I/O emulation path. The major control flow includes:
1. pio_instr_vmexit_handler (entry point for handling vmexit on I/O instruction):
Extract port address, register size, direction and value (for write only),
fill in an I/O request (of type io_request), invokes do_io to handle that
and update the guest registers if the request has been successfully handled
when do_io returns.
2. emulate_io:
Handle the given I/O request. The request is handled or sent to VHM if it
returns 0 (the actual status can be found in io_req->processed). On errors a
negative error code is returned.
3. emulate_pio_by_handler:
Look for the PIO handler for the given request and invoke that
handler. Return 0 if a proper handler is found and invoked (the status of
the emulation can be found in io_req->processed), -EIO when the request
spans across devices, and -ENODEV when no handler is found.
4. emulate_pio_post:
Update guest registers after the emulation is done. Currently this can
happen either right after do_io() or after the vcpu is resumed. Status check
on the I/O request and follow-up actions on failure will also go here.
Note:
Currently do_io can return 0 with io_req->processed being REQ_STATE_PENDING if
the request is sent to VHM for further processing. In this case the current vcpu
will be paused after handling this vm_exit, and dm_emulate_pio_post will be
invoked to do the rest after this vcpu is resumed. When vcpus are scheduled back
to exactly where they are scheduled out later, do_io should be responsible for
the post_work and the processing of do_io results shall be mostly the same.
v2 -> v3:
* Rename: emulate_pio_by_handler -> hv_emulate_pio.
* Properly mask the value passed to port I/O handler.
v1 -> v2:
* Rename: do_io -> emulate_io.
* Rename io_instr_vmexit_handler -> pio_instr_vmexit_handler to reflect the
fact that it handles port I/O only.
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The current hierarchy :
CONSOLE --> SERIAL -->UART DRIVER
This patch remove SERIAL layer, that is console will
call UART driver directly, change it to:
CONSOLE --> UART DRIVER
Remove some related data structures and registration and callback.
Cleanup vuart.c
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
For data structure types "struct key_info, struct pir_desc,
struct map_params", its name is identical with variable name
in the same scope. This MISRA C violation is detected by
static analysis tool.
Naming convention rule:If the data structure type is used by only one
module and its name meaning is simplistic, its name needs prefix
shorten module name.
The following udpates are made:
struct key_info-->struct trusty_key_info
struct pir_desc-->struct vlapic_pir_desc
struct map_params-->struct mem_map_params
Signed-off-by: Xiangyang Wu <xiangyang.wu@linux.intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
For data struct type struct vie, emul_ctxt, its name
is identical with variable name in the same scope.
This MISRA C violation is detected by static analysis
tool.
According to naming convention rule: If the data structure
type is used by only one module and its name meaning is
simplistic, its name needs prefix shorten module name.
Follow the same rule, data structure name "vie_op" needs
to be renamed;
The following updates are made in this patch:
struct vie-->struct instr_emul_vie
struct vie_op-->struct instr_emul_vie_op
struct emul_ctxt-->struct instr_emul_ctxt
Signed-off-by: Xiangyang Wu <xiangyang.wu@linux.intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The variable timer's name is identical with struct
timer s name. This MISRA C violation is detected
by static analysis tool.
According to naming convention rule: If the data
structure type is used by multi modules, its
corresponding logic resource is only used by
hypervisor/host and isn't exposed to external
components (such as SOS, UOS), its name meaning
is simplistic (such as timer), its name needs prefix
"hv_".
Rename struct timer as struct hv_timer.
Replace regular expression:s/struct timer\([ ),;\t\*]\+\)
/struct hv_timer\1
Signed-off-by: Xiangyang Wu <xiangyang.wu@linux.intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
V1:
In order to remove MISRA C violations for rule
219S, rename functions, macros whose name
starts with "_".
Also removed some __mmio functions because they are
duplicates and are not used anywhere.
Renamed functions like __assert, to asm_assert,
because they were only wrappers around asm calls.
V2:
Over and above the changes on V1, modified bitmap
functions names to lock (corresponding to unlock)
introduced in V1
Signed-off-by: Arindam Roy <arindam.roy@intel.com>
Misra c required parameter should not changed in the scope
of function,use local variable to replace it.
Signed-off-by: Huihuang Shi <huihuang.shi@intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
The variable vlapic_timer's name is identical with struct
vlapic_timer's name. This MISRA C violation is detected
by static analysis tool.
Rename variable vlapic_timer as vtimer.
Replace regular expression: s/vlapic_timer\([ ;,.)\-]\+\)/vtimer\1
Signed-off-by: Xiangyang Wu <xiangyang.wu@linux.intel.com>
Parameter's type which is pointer should not be changed in the
scope of function,assign it's value to local variable to fixed
it out.
Signed-off-by: Huihuang Shi <huihuang.shi@intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
There are many naming violations detected by static analysis
tool. Data structure type name is the same as variable name.
According to naming convention rules, If the data structure
type is used by multi modules and its name meaning is
simplistic (such as vcpu, vm), its name needs prefix "acrn_".
Rename struct vpic as struct acrn_vpic.
Replace regular expression:s/struct vpic\([ ),;\t\*]\+\)/struct acrn_vpic\1
Signed-off-by: Xiangyang Wu <xiangyang.wu@linux.intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
There are many naming violations detected by static analysis
tool. Data structure type name is the same as variable name.
According to naming convention rules, If the data structure
type is used by multi modules and its name meaning is
simplistic (such as vcpu, vm), its name needs prefix "acrn_".
Rename struct vlapic as struct acrn_vlapic
Replace regular expression:s/struct vlapic\([ ),;\t\*]\+\)/struct acrn_vlapic\1
Signed-off-by: Xiangyang Wu <xiangyang.wu@linux.intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The current struct vcpu has two members, namely 'struct vhm_request req' and
'struct mem_io mmio', that hold similar info, including the address, direction, size,
value and status of mmio reqeusts.
As a step towards a unified framework for both MMIO/PIO, this patch unifies
these two members by a tailored version of vhm_reqeust, mostly with the reserved
fields dropped. The definitions to request types, directions and process status
are reused.
Handling errors during emulations will be revisited after the I/O emulation
paths are unified. Thus for this patch the mmio.mmio_status in inherited by
io_req.processed which is not yet properly processed.
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
hypervisor will crash if user try to call hypercall
HC_CREATE_VM in infinite style.
actually, the number of VMs hypervisor can support
depends on the bit width of 'vmid_bitmap'.should
return error in case of overflow.
other cleanup for this function to avoid memory leak
in case of failure.
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Add lookup_address to lokup the page table for a virtual address
of primary page table or a physical address of extended page table.
The remaining obtain_last_page_table_entry could be removed with their
called function later.
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
The ept_mr_add still use the old map_mem. The old API will
keep for a peroid until the SOS the same refine be merged.
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Merge mmu_modify with mmu_del to mmu_modify_or_del(..., type).
While type is MR_MODIFY, the actual action is doing mmu_modify; while
type is MR_DEL, the actual action is doing mmu_del.
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Add hcall_change_vm_page_wp_perm to change guest one page write permission.
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
If try to modify a memory region which will cross a large page and the first
page virtual address in it would not align to the large page size, it would
modify the whole large page attributes which is fatal wrong.
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
In the function scope,the parameter should not be
changed as Misra required.
V1->V2 recover some violations because of ldra's false positive.
V2->V3 sync local variable' type to parameter's type with the prefix of const.
Signed-off-by: Huihuang Shi <huihuang.shi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
SOS boot with all physicall cpus, before running UOS, it should free
CPU resource by offline not used cpus
- first do standard cpu offline flow
- then call hcall_sos_offline_cpu hypercall to release cpu resource really
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
if defined CONFIG_VM0_DESC, HV will use predefined vm0_desc to config
VM0, otherwise, HV will run VM0 with all physical cpus.
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
In vioapic emulating code, the vioapic spinlock is taken twice
in the same context.
Signed-off-by: Zheng, Gen <gen.zheng@intel.com>
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Signed-off-by: Zheng, Gen <gen.zheng@intel.com>
Fix x86 directory violations which related to integer problems,
some of problems are skipped because of ldra's false positive.
V1->V2 1.modified the code style
2.fix all macro VM_EXIT_IO_INSTRUCTION related
Signed-off-by: Huihuang Shi <huihuang.shi@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
The purpos is to unify the layout of general-purpose regs in interrupt/excpetion context.
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The general-purpose register layout is identical to instructio emulation context.
So no need to do the mapping.
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
In current code, general-purpose register layout in run_context is not align with the
general-purpose register index when vmexit. So hv needs to map the index used during
vmexit to the index of the general-purpose register in run_context.
This patch align the layout, so that no mapping needed.
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
1. fix some description for hv mmu_modify
2. add pml4_page input parameter for ept_mr_modify to keep align with
ept_mr_add and ept_mr_del which will support add or delete MR for trusty.
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
1. rename set_vm_memmap to set_vm_memory_region
2. split ept_mmap into ept_mr_add and ept_mr_del
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
In the hypervisor, there are many casts from
an void pointer to integer pointer, then from
integer pointer to structure pointer.
These pointer castings are detected by static analysis
tool. All pointer casts are violations, There are
some duplicated pointer cast. This will make deviation
analysis complex.
BTW, there are one useless pointer casting and one
wrong pointer casting in the hypervisor.
Remvoe duplicated pointer casts to make deviation analysis
simple;
Remove one useless pointer casting;
Update one wrong pointer casting.
Note: There are many void type pointer casts, non-void type
pointer is casted to void type pointer, char type pointer casts,
non-char type pointer is casted to char type pointer. These pointer
casting is need by the memory management module, IO moudle etc.
Deviation analysis will be made and recoded in the analysis report.
V1-->V2:
Fix mixing pointer and array voilation.
V2-->V3:
Remvoe pointer casting from integer pointer into
non-void/non-char pointer directly;
Remove redundant type conversion.
Signed-off-by: Xiangyang Wu <xiangyang.wu@intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
The plus and minor have the same level of precedence. The Misra-C
considers it as a violation. Added brackets in between addition and
substraction oprators.
Signed-off-by: Yang, Yu-chu <yu-chu.yang@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Added brackets for expression to make it easy to understand and
reduce the mistake of precedence. The rule is applied to the
mixed same level of prevedence opeartors, high level presedence
operators and logical expression.
Signed-off-by: Yang, Yu-chu <yu-chu.yang@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Removed comment out unused code in vmexit.c, sprintf.c and vmcall.c
Minor fix in vmx.c to prevent Misra-c consider it as a piece of
code.
Signed-off-by: Yang, Yu-chu <yu-chu.yang@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
- explicitly declare the array size to fix the violation 'Array has no
bounds specified'
- minor changes for comments style
v1 -> v2:
* add the definition for exit reasons from 0x39 to 0x40 based on "SDM
APPENDIX C VMX BASIC EXIT REASONS"
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
The fixed MTRR MSR numbers are not contiguous, so it's not correct
to justify it by checking if it falls in certain range.
This patch fixes this issue by removing is_fixed_range_mtrr()
and use get_index_of_fixed_mtrr() to loop fixed_mtrr_map[]
and compare individual MSR values.
Also removed the unused function get_subrange_end_of_fixed_mtrr()
Signed-off-by: Zide Chen <zide.chen@intel.com>
fix all assign.c integer violations except related
"Implicit conversion: actual to formal param".
Signed-off-by: Huihuang Shi <huihuang.shi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This is the final cleanup of the integral type related issues, reported by the
static checker, under common/, mostly including
* make explicit the narrowings of vm_ids passed by register.
* work around the confusion of the static checker by abstracting
sub-expressions to local variables.
The remaining reports that are not trivial to suppress will be in the scope of a
separate document.
v1 -> v2:
* Instead of converting vm_ids inside hcall_xxx, update the prototypes of
these functions and do the conversion in vmcall_vmexit_handler.
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Clean up most reported integral-type-related violations still existing under
arch/x86/guest/. The remaining reports that are not trivial to suppress will be
explained in separate documents.
Also move acpi_info outside acrn_common.h as the structure is no longer shared
with DM.
v1 -> v2:
* Move struct acpi_info to bsp_extern.h
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The error code in the hypervisor is 32-bit signed integers. To reduce implicit
conversions, this patch make hcall_xxx returns int32_t, and finally converts it
to uint64_t when assigned to rax whose semantics is properly defined in C99.
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Qualified or unqualified int or bool are the only types allowed for bit-field
members in C99, and MISRA C further forbids using plain int.
Use uint32_t (which is equivalent to unsigned int) for all bit-field members.
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Transfer DMAR_[GS]ET_BITSLICE to inline function
to limit the parameter type and return type.
Signed-off-by: Huihuang Shi <huihuang.shi@intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
Now the Intel RDT emulation is working in progress. So disable it
for temporary solution to avoid guest OS running with incorrect RDT
configuration.
Signed-off-by: Shuo Liu <shuo.a.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Most of the time, we use the virtual address of EPT PMl4 table,
not physical address.
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
mainly focus on: like U/UL as unsigned suffix;
char and int mix usage; also change some function's params
for data type consistent.
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
There are many type conversions in the atomic
operations invoking reported by static analysis tool. These
type conversions voilate MISRA C.
To keep uniform naming convention, rename atomic operation
function names:
atomic_set_int/long --> atomic_set32/64;
atomic_clear_int/long --> atomic_clear32/64;
atomic_load --> atomic_load32;
atomic_store --> atomic_store32;
atomic_swap --> atomic_swap32;
atomic_readandclear --> atomic_readandclear32;
atomic_inc --> atomic_inc32;
atomic_dec --> atomic_dec32;
atomic_cmpxchg --> atomic_cmpxchg32;
atomic_xadd --> atomic_xadd32.
Update the type of atomic_load32/64, atomic_store32/64,
atomic_swap32/64, atomic_cmpxchg32/6.
Update related variables and callers.
Note: the type of return value and parameters of atomic_xadd32/64
still keep signed int/long since caller pass
negative variable to atomic_xadd32/64;
V1-->V2:
Add comments for atomic_set/clear to differ from
bitmap_set/clear.
Signed-off-by: Xiangyang Wu <xiangyang.wu@intel.com>
Reviewed-by: Junjie.Mao <junjie.mao@intel.com>
There is chance to destroy vm whose ept table was not created, for
example, dm fails to setup mem for vm. In this case, it's better
to check the value of eptp before calling free_ept_mem() rather than
relying on assertion in the function.
Signed-off-by: Yan, Like <like.yan@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
MISRA C requires that a 'if' statement followed by one or more 'else if'
statement shall be terminated by an 'else' statement which contains either
side-effect or a comment, to ensure that conditions are considered
exhaustively.
Note that a simple 'if' statement is not required to be terminated by 'else'.
This patch fixes such violations by either refactoring the code or add the
'else' statement with either a comment (describing why this case can be skipped)
or logging the event. It may not be satisfactory for the release version where
logging is no-op, but properly handling these non-trivial cases is out of the
scope of this patch.
v1 -> v2:
* Fix unintended semantic changes in add_(msix|intx)_remapping and
io_instr_vmexit_handler.
* Simplify boolean checks in vpic_ocw2.
* Rephrase the comment in strtol_deci.
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
In the current hypervisor, there are many members of CPU_reg_name
used to check range and useless register names.
Define some CPU_REG_XX_FIRST and CPU_REG_XX_LAST MACROs to
make range checking clear;
Remove useless register names CPU_REG_XX_LAST in CPU_reg_name;
Update the related caller.
V1-->V2:
Update a mistake, replace second CPU_REG_SEG_FIRST
with CPU_REG_SEG_LAST in ASSERT.
V2-->V3:
Add '()' for bool expression in ASSERT.
Signed-off-by: Xiangyang Wu <xiangyang.wu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
- explicitly declare the array size of 'size2mask[]'
otherwise, the static checking tool treats the array size to be 4, so
that it complains when accessing index '4' or '8'
- unify the comments style and make sure the line length less than 80
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
There are some integer type conversions in the VMX, timer
and MTTR module detected by static analysis tool.
Update related integer type in VMX, timer and MTTR
module.
Add related constant value with 'U/UL' suffix.
V1-->V2:
Resolve few rebase conflicts.
V2-->V3:
Add 'h' for uint16_t argument in log function;
Update the type of temp variable 'type' as uint8_t
in MTTR module to reduce type conversion.
Signed-off-by: Xiangyang Wu <xiangyang.wu@intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
Current code has a mistake associating destination with
redirectionhint. So just use the destination mode to work out
destination mode.
When injecting the msi interrupt to vcpu in hypervisor layer,
current code ingnores the redirection hint(RH) bit of msi address
message from guest, and just use the destination mode and
destination ID. So correctly before injecting, check the RH bit,
if set, choose the vcpu that has lowest priority to inject msi.
Signed-off-by: Zheng, Gen <gen.zheng@intel.com>
Reviewed-by: Zhao, Yakui <yakui.zhao@intel.com>
Reviewed-by: Yin, Fengwei <fengwei.yin@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
NR_MAX_IRQS is defined as 272 and IRQ_INVALID as 273 which implies
that 272 is a valid irq number. In this case, an illegal access can
occur at run time when irq_desc_array[] or irq_count[] is accessed
with index 272. This fix stops the illegal access by renaming
NR_MAX_IRQS to NR_IRQS and then places proper conditions for range
checks. If the index is >= NR_IRQS, then index is invalid otherwise
its considered valid for accessing irq arrays. IRQ_INVALID definition
is also changed to 0xffffffffU to indicate maximum unsigned value.
Signed-off-by: Madeeha Javed <madeeha_javed@mentor.com>
ASSERT/panic are called when we get invalid values. It is a little bit strict.
This patch replaces ASSERT/panic with pr_err and return -EINVAL.
v1 -> v2:
- v1 patch name (HV: instr_emul: Remove unnecessary check in decode_xxx)
- keep the check and replace ASSERT/panic with pr_err.
Signed-off-by: Kaige Fu <kaige.fu@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
In the hypervisor, VMCS fields include 16-bit fields,
32-bit fields, 64-bit fields and natural-width fields.
In the current implement, there are exec_vmread/exec_vmwrite
used for accessing 32-bit fields, 64-bit field and
natural-width fields. This usage will confue developer.
So there are many type casting for the return value and
parameters vmread/vmwrite operations.
Since exec_vmread/exec_vmwrite and exec_vmread64/exec_vmwrite64
are the same, update current exec_vmread/exec_vmwrite
implement into exec_vmread64/exec_vmwrite64 implement
and add MACRO define for exec_vmread/exec_vmwrite in
head file;
To access 64-bit fields in VMCS, callers use
exec_vmread64/exec_vmwrite64;
Update related variables type for vmread/vmwrite operations;
Update related caller according to VMCS fields size.
Note:Natural-width fields have 64 bits on processors
that support Intel 64 architecture.To access natural-width
fields in VMCS, callers still use exec_vmread/exec_vmwrite,
keep the current implementation.
V1--V2:
This is new part of this patch serial to only
update 64-bit vmread/vmread opertions and related
caller, for netural width fields, still use exec_vmread
or exec_vmwrite.
V2-->V3:
Fix few mistake updations for netural fields in VMCS,
just keep exec_vmread/exec_vmwrite to access them;
Fix few mistake updations for 64-bit fields in VMCS.
V3--V4:
Add "016ll" for 64-bit variable in log function;
Few updates for coding style;
Rename lssd32_idx as tr_sel in VMX module.
V4-->V5:
Use CPU_NATURAL_LAST in the vm_get_register and
vm_set_register to make condition statement more
understandable.
Signed-off-by: Xiangyang Wu <xiangyang.wu@intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
In the hypervisor, VMCS fields include 16-bit fields,
32-bit fields, 64-bit fields and natural-width fields.
In the current implement, no exec_vmread32/exec_vmwrite32
is for accessing 32-bit fields. So there are many type
casting for the return value and parameters vmread/vmwrite
operations.
Create exec_vmread32 and exec_vmwrite32 functions to
access 32-bit fields in VMCS;
Update related variables type for vmread/vmwrite operations;
Update related caller according to VMCS fields size.
V1--V2:
This is new part of this patch serial to only
update 32 bit vmread/vmread opertions and related
caller.
V2-->V3:
Update related variables type in data structure
for exec_vmread32/exec_vmwrite32.
Rename temp variable 'low' into 'value' for
exec_vmread32;
V3-->V4:
Remove useless type conversion.
Signed-off-by: Xiangyang Wu <xiangyang.wu@intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
In the hypervisor, VMCS fields include 16-bit fields,
32-bit fields, 64-bit fields and natural-width fields.
In the current implement, no exec_vmread16/exec_vmwrite16
is for accessing 16-bit fields. So there are many type
casting for the return value and parameters vmread/vmwrite
operations.
Create exec_vmread16 and exec_vmwrite16 functions to
access 16-bit fields in VMCS;
Update related variables type for vmread/vmwrite operations;
Update related caller according to VMCS fields size.
V1--V2:
This is new part of this patch serial to only
update 16-bit vmread/vmread opertions and related
caller.
V2--V3:
Add "hu" for uint16_t argument in log function;
Add comments for function get_vmcs_field;
Update related variables type for exec_vmread16;
Rename temp variable 'low' into 'value'.
V3-->V4:
Few updates for exec_vmread16.
V4-->V5:
Few updates for coding style;
Replace "hux" with "hu" in log function for 16-bit
variable.
V5-->V6:
CPU_REG_64BIT_LAST is used in the vm_get_register and
vm_set_register to make condition statement more
understandable.
Signed-off-by: Xiangyang Wu <xiangyang.wu@intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
In the current "enum cpu_reg_name", there are 16-bit segment
register names, 16-bit descriptor table register names, and
16-bit task register names. These 16-bit register names are
defined among the 64 bit register names. To access these
16-bit fields in VMCS and 32 bit fields in VMCS, more
condition statements need to be used.
Update 16-bit register names position to simplify conditions
in vm_get_register and vm_set_register since different
fields size accessing in VMCS by different vmread/vmwrite
opreation.
Note: After checking the current implementation, the register names of
the same kind of registers (general registers, control registers,
segment registers etc) need to be defined in order, some code checks
the range by using this order. But different kinds of register
names as group, this group position can be adjusted to simplify
conditions.
The follwoing register names group need to be considered in current
implemetation:
(1) General register names group: CPU_REG_RAX~CPU_REG_RDI;
(2) Non-General register names group:CPU_REG_CR0~CPU_REG_LAST;
(3) segment register names group:CPU_REG_ES~CPU_REG_GS.
V1-->V2:
This is new part of this patch serial created in
V2 to rearrange register names as needed.
V2--V3:
Update comment information.
V3-->V4:
Define CPU_REG_NATURAL_LAST and CPU_REG_64BIT_LAST to
make condition more understandable.
Signed-off-by: Xiangyang Wu <xiangyang.wu@intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
MISRA C requires that all unsigned constants should have
the suffix 'U/UL'(e.g. 0xffU), but the assembler may not
accept such C-style constants.
To work this around, HOST_GDT_RING0_CODE_SEL and
HOST_GDT_RING0_DATA_SEL must be explicitly spells
out in assembly with a comment tracking the original
expression from which the magic number is calculated.
V1-->V2:
Update commit information about HOST_GDT_RING0_CODE_SEL
and HOST_GDT_RING0_DATA_SEL.
V2-->V3:
Update comment for HOST_GDT_RING0_CODE_SEL in assembly
code.
Signed-off-by: Xiangyang Wu <xiangyang.wu@intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
fix integer type violations,keep some violations which
related to hypcall and msix_entry_index.
V1->V2:1.modified API_MAJOR_VERSION from Makefile
2.sync acrn_common.h changed to device model
Signed-off-by: Huihuang Shi <huihuang.shi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Change these 6 APIs to void type:
init_default_irqs
interrupt_init
early_init_lapic
init_lapic
init_iommu
destroy_iommu_domain
It has checked the argument of destroy_iommu_domain in shutdown_vm,
then no need to check it again inside destroy_iommu_domain.
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Function like macro changed to be inline function to limit
the return type and parameter type.
V1->V2:change the apis to letter case.
Signed-off-by: Huihuang Shi <huihuang.shi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Function like macro changed to be inline function to limit
the return type and parameter type.
Signed-off-by: Huihuang Shi <huihuang.shi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This patch cleans up the integral-type-related violations after the access
pattern to RTEs is unified. Major changes include:
1. vioapic_mmio_read(), vioapic_mmio_write() and vioapic_mmio_rw() assumes
the size of the register to be accessed is always 4, which is checked in
vioapic_mmio_access_handler(). Thus they no longer takes the unused
''size'' parameter.
2. Typical integral-type-related violation fixes including 'U' suffixes,
type of local variables, conversion specification in format strings, etc.
v1 -> v2:
* Drop duplicated definitions to IOAPIC register offsets.
* Drop the ''size'' parameter of vioapic_mmio_[read|write] and
vioapic_mmio_rw since vioapic_mmio_access_handler() ensures that size is
always 4.
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
There are two different ways the current implementation adopts to access ioapic
RTEs:
1. As two 32-bit registers (typically named ''low'' and ''high''), or
2. As one 64-bit register (typically named ''rte'').
Two issues arise due to the mixed use of these two patterns.
1. Additional conversions are introduced. As an example, ioapic_get_rte()
merges two RTE fragments into a uint64_t, while some callers break it
back to ''low'' and ''high'' again.
2. It is tricky to choose the proper width of IOAPIC_RTE_xxx constants. SOS
boot failure is seen when they are 32-bit due to the following code:
/* reg is uint64_t */
vioapic->rtbl[pin].reg &= ~IOAPIC_RTE_REM_IRR;
while making them 64-bit leads to implicit narrowing when the RTEs are accessed
in the low & high pattern.
This patch defines a union ''ioapic_rte'' and unifies the access pattern
to IOAPIC and vIOAPIC RTEs.
v1 -> v2:
* Instead of two 32-bit ''low'' and ''high'', define a union that allows
either 32-bit or 64-bit accesses to RTEs.
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The main focus on: constant suffix U/UL; parameters cast like
uint32 to a uint16 variable; unify some APIs interface,
consist with the callers.
also modify some places to unify code style
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Signed/unsigned conversion should add cast explicitily
or change the type of them to the same.
V1->V2:Fixed the 0U to 0UL because of the mistakes.
V2->V3:remove unsed macro
Signed-off-by: HuiHuang Shi <huihuang.shi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The cpu offline requester monitor the target cpu state
to detect whether target cpu is put to offline already.
So we should only update the cpu state to offline after
all other operations are finished.
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Reviewed-by: Eddie Dong <Eddie.dong@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Includes header file of non-static function, and declare the
in-file use function static.
Signed-off-by: Yang, Yu-chu <yu-chu.yang@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
In non real mode, for segment registers other than CS, the guest segment
base should be zero, otherwise the guest's segmentation results in wrong
effective addresses.
Linux boots with the wrong segment registers (base address in hidden part),
because it happens that it assigns the segment registers before using any
of them, which effectively reloads the segment base addresses from GDT.
vmid's type prefered to be uint16_t.
V1->V2:vmid from uint32_t transfer to uint16_t
V2->V3:add range check to hcall's vmid parameter
V3->V4:seperate the declaration and actual code.
V4->V5:remove range check from hcall's vmid parameter
Signed-off-by: Huihuang Shi <huihuang.shi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Use the array for lapic_id directly to avoid the unnecessary pointer
arithmetic.
With current implementation,
lapic_id_base is always a byte array with CPU_PAGE_SIZE elements
What this patch does:
- replace 'uint8_t *lapic_id_base' with 'uint8_t
lapic_id_array[CPU_PAGE_SIZE]' to make the boundary explicit
- add a range check to ensure that there is no overflow
v2 -> v3:
* update the array size of lapic_id_array per discussion with Fengwei
v1 -> v2:
* remove the unnecessary range check in parse_madt in cpu.c
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
There are some duplicate codes in emulate_xxx functions which update rflags and
it deserves a common function to deal with the situation. So, this patch
introduces a new function vie_update_rflags to updating rflags accordingly.
Signed-off-by: Kaige Fu <kaige.fu@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
We will decode SIB in decode_sib after decode_modrm. So, there is no need to
decode SIB related field in decode_modrm. This patch remove it.
Signed-off-by: Kaige Fu <kaige.fu@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
There so many ASSERT following the function vie_read_register and vm_get_seg_desc.
It's better to move the ASSERT to those two functions and make the code more
compact.
Signed-off-by: Kaige Fu <kaige.fu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
rename vm_hw_logical_core_ids to vm_pcpu_ids
and changed the type to uint16_t.
V1->V2:rename the vm_hw_logical_core_ids
Signed-off-by: Huihuang Shi <huihuang.shi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
1) Change these 5 APIs to void type:
vcpu_inject_pf
uart16550_calc_baud_div
uart16550_set_baud_rate
console_init
ptdev_activate_entry
No need to return 'entry' for ptdev_activate_entry
since the input parameter is 'entry'.
2) no need to check return value for the caller
such as sbuf_put/console_putc/serial_puts/serial_get_rx_data
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Fixs: 7fd3c624 (HV:CPU:Constant values replace with
CPU MACRO)
There is a mistake in the previous MARCO replacing patch,
use CR4 value replaces CR0 MACRO.
Use CR0 value replaces CR0 MACRO.
Signed-off-by: Xiangyang Wu <xiangyang.wu@intel.com>
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
To minimize explicit casts, this patch adjusts the types of function parameters
and structure fields related to vlapic and update the types in the internal
implementation accordingly.
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
Acked-by: Dong Eddie <eddie.dong@intel.com>
Use local variables to hold struct members before using them, which helps us
avoid confusions from static checkers.
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
Acked-by: Dong Eddie <eddie.dong@intel.com>
Make the type indicators in formatting strings aligned with the actual variables
passed.
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
Acked-by: Dong Eddie <eddie.dong@intel.com>
Most loop variables in vlapic are used in unsigned contexts (include bitops,
arithmetic w/ other unsigned integers, etc). This patch refactors these loop so
the these variables can be unsigned.
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
Acked-by: Dong Eddie <eddie.dong@intel.com>
For constants used in unsigned contexts, a 'U' suffix is required per MISRA C
standard.
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
Acked-by: Dong Eddie <eddie.dong@intel.com>
The patch fixes the issue when SOS can't boot using HV release version.
In current code, the assembly code for "sgdt" & "sidt" is not right.
The operand is output, not input.
Also, current code use "rdmsr" instruction to read MSR_IA32_SYSENTER_CS,
which doesn't sepcify the clobbered registers it uses.
This patch uses API msr_read to read MSR_IA32_SYSENTER_CS.
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
- Define the array for 'struct irq_desc' with its size
The array size for 'struct irq_desc' is constant and will not be
changed.
- Use array rather than a pointer to avoid the pointer arithmetic.
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
The patch fixes integral type related violations on HV pm part.
Signed-off-by: Victor Sun <victor.sun@intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
Per new design of trusty memory allocation: VHM will reserve contiguous
memory for trusty when DM launch guest with trusty enabled. And OSloader
will relocate trusty to 511G directly and pass trusty's base/entry to HV
by trusty_boot_param when call HC_INIITIALIZE_TRUSTY.
So in this patch:
1. Extend trusty_boot_param to support addr/entry above 4G.
2. Remove size check for old version compatibility.
Signed-off-by: Qi Yadong <yadong.qi@intel.com>
Acked-by: Zhu Bing <bing.zhu@intel.com>
like: constant of unsigned int need add U/UL as surfix.
enum value can't use to give or compare with int directlly.
unsigned and signed mis-matched
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
MISRA-C requires the use of brackets, even when there is only one
statement in the loop body.
Signed-off-by: Ying Liu <ying2.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
With field defined as uint64_t, there are some implicit type conversions when
calling exec_vmwrite/read functions which takes a uint32_t for the first parameter.
This patch fixes it by change field to uint32_t.
v1 - > v2:
- Keep the field as it is and change the defination of field to uint32_t.
Signed-off-by: Kaige Fu <kaige.fu@intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
There are some integer type conversions reported by static
analysis tool for vcpu id, number of created vcpus, and
vpid, to reduce these type conversions, redesign vcpu id,
number of created vcpus, and vpid type as uint16_t as per
their usage, related 16-bit atomic operations shall be
added in HV.
MISRA C requires that all unsigned constants should have the suffix 'U'
(e.g. 0xffU), but the assembler may not accept such C-style constants.
Add 16-bit atomic add/dec/store operations;
Update temporary variables type and parameters type of
related caller;
Update vpid type as uint16_t;
Replace Macro with constant value for CPU_PAGE_SIZE.
Note: According to SDM A.10, there are some bits defined
in the IA32_VMX_EPT_VPID_CAP MSR to support the INVVPID
instruction, these bits don't mean actual VPID, so
the vpid field in the data struct vmx_capability doesn't
be updated.
V1--V2:
update comments for assembly code as per coding style;
Signed-off-by: Xiangyang Wu <xiangyang.wu@intel.com>
The relocation feature relies on the ld option "-z noreloc-overflow" which is
only available for binutils >= 2.27, while on Ubuntu 16.04 or older the default
version of binutils is 2.26.
This patch wraps the relocation code with a configurable macro and make it
undefined by default to avoid default build failures.
NOTE: This is just a hotfix. The code dropped with undefined CONFIG_RELOC needs
to be reviewed by the original author of this feature. Checks to the binutils
version will also follow up.
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
- this patch is to prevent secure world(trusty) from
fetching instructin from normal world memory.
- copy valid PDPTEs from normal world EPT to secure
world EPT, and remove 'IA32E_EPT_X_BIT' attribute in
these entries.
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
- move all relocatoin code from cpu.c and cpu.h to reloc.c and reloc.h
- no any logic changes
Signed-off-by: Zide Chen <zide.chen@intel.com>
Reviewed-by: Yin fengwei <fengwei.yin@intel.com>
- UEFI: change __emalloc() function to allocate from any available memory
under 4G
- Define CONFIG_RAM_START to the lowest possible address 1M, making sure
HV can only be relocated to higher address
Signed-off-by: Zheng Gen <gen.zheng@intel.com>
Signed-off-by: Zide Chen <zide.chen@intel.com>
Reviewed-by: Yin fengwei <fengwei.yin@intel.com>
Build and link hypervisor with "-pie" and remove static linking so that
it generates .rela sections for relocation
Signed-off-by: Zheng Gen <gen.zheng@intel.com>
Signed-off-by: Zide Chen <zide.chen@intel.com>
Reviewed-by: Yin fengwei <fengwei.yin@intel.com>
- Trampoline code doesn't have the same relocation delta with HV,
Need to manually patch them when referenced from HV
- replace all references to CONFIG_RAM_START with the actual HV load
address
Signed-off-by: Zheng Gen <gen.zheng@intel.com>
Signed-off-by: Zide Chen <zide.chen@intel.com>
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
In cpu_primary.S
- Assign %rsp in cpu_primary_start_64(), so we can call _relocate()
before any references to the symbols that need to be patched
- Move lidtq instruction and the IDT fixup code after _relocate() call
- In code64 part, replace 'mov' with 'lea' for correct addressing
- No relocation is needed in code32 part
In trampoline.S:
- add trampoline_spinlock_ptr pointer, so we may be able to fixup
trampoline code in HV
Signed-off-by: Zheng Gen <gen.zheng@intel.com>
Signed-off-by: Zide Chen <zide.chen@intel.com>
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
In the current memory module, there are many constatn value
without U/UL suffix, it is reported as MISRA C violations by
static analysis tool.
Add 'U/UL' suffix for unsigned contant value in memory module
as needed.
Note:In the most case, CPU_PAGE_SIZE(0x1000) is used as
unsigned integer contant value, so CPU_PAGE_SIZE is defined
as unsigned integer contant value, and it is safety converted
into unsigned long type according to MISRA C standard.
Signed-off-by: Xiangyang Wu <xiangyang.wu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
there is a bug for system hang on SBL bootloader after we enabled turbo mode.
so add tmp patch to disable turbo mode as the work-around.
after SBL fixed it, we revert this patch.
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Check return value for the called functions in vmexit handler
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
In the data struct cpuinfo_x86, some field names have
prefix x86, others don't have prefix.
In order to unify names, update field names of struct
cpuinfo_x86 as per its usage purpose, remove prefix x86.
V1-->V2:
Resolve conflict in cpu.c by rebase command
V2-->V3:
Remove track-on id as per jack's comments
Signed-off-by: Xiangyang Wu <xiangyang.wu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The MMIO/PIO write APIs in io.h always take a uint32_t value but may uses it as
8, 16 or 32-bit integers. This patch converts the prototypes to align with their
functionality.
The pointer conversion and assignment are splitted to separate statements to
prevent static checkers from being confused about the underlying types.
v1 -> v2:
* Change the prototype of mmio-related functions, instead of keeping the
explicit conversions internal. The addresses are kept void* since in most
cases hva (in void*) is passed.
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The assigment should be done outside while loop condition. To fix
it, one assigment initializaion and update statement of for loop
have been applied. The only while loop reminds to avoid very long
for loop expression.
Signed-off-by: Yang, Yu-chu <yu-chu.yang@intel.com>
transfer num_vcpus,exp_num_vcpus to uint16_t.
transfer vm_hw_num_cores to uint16_t.
Signed-off-by: Huihuang Shi <huihuang.shi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
To follow the Misra C standard, doing one assignment per line to
make code is clearly readable and reduces the confusion of its
intetion or typo.
Signed-off-by: Yang, Yu-chu <yu-chu.yang@intel.com>
To be consistant with inline function mem_write, modifying the
mem_read* and using inline function instead.
Signed-off-by: Yang, Yu-chu <yu-chu.yang@intel.com>
To follow the Misra-c standard, the assignment operation inside
function-like macro should be avoided. Replaced the violations
macro using inline function instead.
Signed-off-by: Yang, Yu-chu <yu-chu.yang@intel.com>
inst_len with 0 length should be treated as invaild value. This patch move 0 length
check to the begainning of the function and return -EINVAL if inst_len == 0.
Tracked-On: ccm0001001-247210
Signed-off-by: Kaige Fu <kaige.fu@intel.com>
There are unsinged constant values don't have 'U/UL' suffix
in the HV reported by static analysis tool.
Add 'U/UL' suffix for unsigned constant values as needed.
Tracked-on: ccm0001001-247033
Signed-off-by: Xiangyang Wu <xiangyang.wu@intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
There are some narrow integer conversion violations
in the HV reported by static analysis tools.
The narrow integer conversions are resolved by
following methods:
* Explicit type conversion as needed;
* Update suffix of constant value as 'U'
as needed.
cked-on: ccm0001001-247033
Signed-off-by: Xiangyang Wu <xiangyang.wu@intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
This patch cleans up the remaining integral-related violations in ioapic.c,
including
* integral narrowing, and
* explicit conversion between signed & unsigned integers.
Tracked-on: ccm0001001-247033
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Currently IOAPIC pins are represented using various types, including uint16_t,
int, uint8_t and uint32_t. This patch converts all pins to uint8_t since the
maximum number of interrupt input pins per IOAPIC is limited to 240. The special
value IOAPIC_INVALID_PIN is defined to indicate that a valid pin cannot be
found.
This type clean up also has the following impacts.
* The values in the ''legacy_irq_to_pin'' table are piggybacked with their
trigger mode. This patch splits them as the piggyback prevents us from
using a uint8_t[] for this table, and these two information are never used
at the same time.
* The ''offset'' parameter in ioapic_read_reg32 & ioapic_write_reg32 are
promoted to uint32_t to minimize explicit type conversions and keep
aligned with the type of formal parameters of mmio_(read|write)_long.
Tracked-on: ccm0001001-247033
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
According to C99 standard, -1 integer constant with 'U/UL'
suffix has no type.
To explicit the integer constant:
Update -1U or -1UL as ~0U or ~0UL, or invalid number according
to usage case.
V1-->V2:
Update parameter name and type of send_startup_ipi since
the second parameter is used as pcpu_id;
Update related comments for code clearity.
V2-->V3:
Update comments of struct acrn_irqline;
rename cpu_startup_dest as dest_pcpu_id in the second
parameter of send_startup_ipi.
Tracked-on: ccm0001001-247033
Signed-off-by: Xiangyang Wu <xiangyang.wu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
* introduce EXTRA_VERSION to replace RC_VERSION
* add daily tag into the version information
* unify the hypervisor and device model version
Signed-off-by: Jack Ren <jack.ren@intel.com>
To follow Misra-C standard, only one assignment is allowed in both
initialization and update statement.
Noncompliant example:
for (i = 0, a = arry[0]; ...; i++, a = arry[i]){...}
Signed-off-by: Yang, Yu-chu <yu-chu.yang@intel.com>
To follow the Misra-c standard, any operators should be done outside
the conditions. Removed the prefix, postfix and bitwise shift from
conditions.
Signed-off-by: Yang, Yu-chu <yu-chu.yang@intel.com>
Extend struct trusty_boot_param to hold rpmb_key.
Copy rpmb_key from trusty_boot_param when initialize
trusty.
Signed-off-by: Qi Yadong <yadong.qi@intel.com>
Reviewed-by: Zhu Bing <bing.zhu@intel.com>
Reviewed-by: Wang Kai <kai.z.wang@intel.com>
Use gpa2hpa() has potential hpa contiguous issue for structure
trusty_boot_param.
Fix it by using copy_from_gpa() instead.
Signed-off-by: Qi Yadong <yadong.qi@intel.com>
Reviewed-by: Zhu Bing <bing.zhu@intel.com>
Reviewed-by: Wang Kai <kai.z.wang@intel.com>
According to MISRA C:2012, suffix 'U/UL' shall be for
unsigned const value, the member of enum variable should
not be used to compare with integer variable.
Add 'U/UL' for unsigned const value in the CPU module;
Use Macro insteading of enum feature_word since the member
of feature_word is used to compare with integer variable;
Use hex number insteading of Macro in the assembly code.
V1-->V2:
Update the suffix of some constant value as 'UL'
according to its'storage variable;
Split MACRO updates used in the assembly code
in other patch.
Signed-off-by: Xiangyang Wu <xiangyang.wu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The 23:16 bits in the IOAPIC version register is the highest entry in the I/O
redirection table, which is 1 smaller than the number of interrupt input
pins. But currently we use these bits directly as the number of pins.
This patch abstracts the pin count calculation code and adds 1 to the max rte
entry number to get the right pin count.
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
MISRA C requires that all unsigned constants should have
the suffix 'U/UL'(e.g. 0xffU), but the assembler may not
accept such C-style constants.
To work this around, all unsigned constants must be
explicitly spells out in assembly with a comment tracking
the original expression from which the magic number is
calculated.
Signed-off-by: Xiangyang Wu <xiangyang.wu@intel.com>
It will print error information inside memcpy_s if
the parameteter is invalid, the caller can not check
the return value for memcpy_s/strcpy_s/strncpy_s
code like this:
int a(void) {
return 0;
}
int b(void){
a();
}
fix as follow:
int a(void) {
return 0;
}
int b(void){
(void)a();
}
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
There are some implicit type conversion in the CPU module,
this voilates MISRA C:2012 required rules.
We walk through each functions of CPU module, update
some variable type and the return value type of
the function, and add 'U/UL' for related const value.
V1-->V2:
Rebase the branch, resolve some conflict.
V2-->V3:
Update commit info for V2.
V3-->V4:
Few updates for fixing error instroduced during
resolving conflict.
Signed-off-by: Xiangyang Wu <xiangyang.wu@intel.com>
IOAPIC pins always fit in 8-bit and we already use uint8_t for virt_pins. This
patch converts pins in vioapic to uint8_t.
This is based on Arindam's previous patch ("was: hv: Cleanup and optimise
vioapic.c"), with SOS boot failure resolved, format string updated, complex
arithmetic expression with implicit type conversion decoupled. Also make some
local variables representing interrupt vectors uint32_t.
Signed-off-by: Arindam Roy <arindam.roy@intel.com>
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Move the existing Trusty document to the doc/ folder (where
it belongs) and convert the text to ReST.
The Documentation/ folder under hypervisor/ is removed as all
documents should be put under doc/.
All technical information has been preserved or was already
available in other documents.
Signed-off-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
No need to check the return value for memset
code like this:
int a(void) {
return 0;
}
int b(void){
a();
}
fix as follow:
int a(void) {
return 0;
}
int b(void){
(void)a();
}
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Most of variables used when decoding instructions are unsigned bit-fields. This
patch adds the 'U' or 'UL' suffix to constants in unsigned context and changes
the type of arguments/local variables when necessary.
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
